Material Safety Data Sheet Issued on May 01 2015 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product name: PLA Filament for 3D Printer 55250-812 VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG BLACK 55251-812 VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG WHITE 55252-812 VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG BLUE 55253-812 VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG RED 55254-812 VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG GREEN 55255-812 VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG ORANGE 55256-812 VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG YELLOW 55257-812 VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG NATURAL TRANSPARENT 55258-812 VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG SILVER/METAL GREY 55259-812 VERBATIM 3D PRINTER FILAMENT PLA 3MM 1KG BLACK 55260-812 VERBATIM 3D PRINTER FILAMENT PLA 3MM 1KG WHITE 55261-812 VERBATIM 3D PRINTER FILAMENT PLA 3MM 1KG BLUE 55262-812 VERBATIM 3D PRINTER FILAMENT PLA 3MM 1KG RED 55263-812 VERBATIM 3D PRINTER FILAMENT PLA 3MM 1KG GREEN 55264-812 VERBATIM 3D PRINTER FILAMENT PLA 3MM 1KG YELLOW 55265-812 VERBATIM 3D PRINTER FILAMENT PLA 3MM 1KG NATURAL TRANSPARENT 55266-812 VERBATIM 3D PRINTER FILAMENT PLA 3MM 1KG SILVER/METAL GREY 55267-812 VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG BLACK (n) 55268-812 VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG WHITE (n) 55269-812 VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG BLUE (n) 55270-812 VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG RED (n) 55271-812 VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG GREEN (n) 55272-812 VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG ORANGE (n) 55273-812 VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG YELLOW (n) 55274-812 VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG NATURAL TRANSPARENT (n) 55275-812 VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 1KG SILVER/METAL GREY (n) 55276-812 VERBATIM 3D PRINTER FILAMENT PLA 2.85MM 1KG BLACK (n) 55277-812 VERBATIM 3D PRINTER FILAMENT PLA 2.85MM 1KG WHITE (n) 55278-812 VERBATIM 3D PRINTER FILAMENT PLA 2.85MM 1KG BLUE (n) 55279-812 VERBATIM 3D PRINTER FILAMENT PLA 2.85MM 1KG RED (n) 55280-812 VERBATIM 3D PRINTER FILAMENT PLA 2.85MM 1KG GREEN (n) 55281-812 VERBATIM 3D PRINTER FILAMENT PLA 2.85MM 1KG YELLOW (n) 55282-812 VERBATIM 3D PRINTER FILAMENT PLA 2.85MM 1KG NATURAL TRANSPARENT (n) 55283-812 VERBATIM 3D PRINTER FILAMENT PLA 2.85MM 1KG SILVER/METAL GREY (n) 55284-812 VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 750G BLACK 55285-812 VERBATIM 3D PRINTER FILAMENT PLA 1.75MM 750G WHITE Brand: Company name: Address: Department: Verbatim Mitsubishi Kagaku Media Co., LTD. Daini Ryumeikan Bldg. 8F 3-20, Kandaogawmachi, Chiyoda-ku, Tokyo 101-0052, Japan Archive Business Development Department Telephone: +81-3-5577-3095 Fax: +81-3-3295-0680 Reference number: 3DF-150422-01E Recommended use and restriction on use: 3D Printer Filament for Material Extrusion type Page 1 of 5
2. HAZARDS IDENTIFICATION GHS Classification: Physical hazards: Health hazards: Environmental hazards GHS Label elements: Pictogram or symbol: Signal word: Hazard statement: Precautionary statement: Safety measures: Response: Storage: Disposal: Not applicable. Not applicable. No relevant information. Do not breathe dust/fume/gas/mist. Get medical attention/advice if you feel unwell. Keep away from fire. Store indoors at ambient temperature. Do not dump into sewers, on the ground or into any body of water. Burn in an adequate incinerator or bury in landfill in accordance with applicable local, state, and federal regulations. 3. COMPOSITION/INFORMATION ON INGREDIENTS Chemical substance/mixture: A mixture Chemical name or generic name: Polylactide resin Chemical properties (chemical formula, etc): No relevant information. Contents: No. Content CAS number Chemical formula Content (%) 1 Polylactide Resin (PLA) 9051-89-2 H[(- OCH(CH 3) )CO-] noh More than 91% 2 Ethylene-propylene copolymer 9010-79-1 -(C 2 H 4 )m- (C 3 H 6 )n- 5 % 3 Additive & Pigment Not disclosed Not disclosed Less than 4% No. ENCS; Japanese Existing and New Chemical Substances ISHL; Industrial Safety and Health Law Number 1 (7)-2537-2 (6)-10 - Health hazards elements: White filament contains titanium oxide (CAS# 13463-67- 7) less than 1%, which may be carcinogenic. (IARC: Group2B) Poisonous and Deleterious substances Control Law: Not applicable Page 2 of 5
4. FIRST AID MEASURES If inhaled: If on skin: If in eyes: If swallowed: If you feel unwell by inhalation of vapor or gas, move to fresh air and keep at rest in a position comfortable for breathing. Call a doctor if you feel unwell. In case of contact with melted material, fully cool down by pouring plenty of water over the clothing. Then take off clothing, cover with clean gauze and get medical attention immediately. Get medical attention if appearance changes, irritating pain occurs or feeling unwell. Immediately rinse the eye with plenty of clean running water for at least 15 minutes. Remove contact lenses, if present and easy to do. Rinse thoroughly the inner side of the eye lid. Get medical attention as soon as possible. If swallowed by accident, keep at rest and get medical attention immediately. Avoid vomit entering into respiratory tract. Do not induce vomiting unless instructed by a doctor. Protection of the person who gives the first aid: Wear appropriate protective equipment (protective glasses, protective mask, gloves, etc.). Provide ventilation. 5. FIRE-FIGHTING MEASURES Suitable extinguisher media: All types of fire extinguisher include water. Specific fire fighting method, protection for fire-fighter: Fight fire responding to the fire in vicinity. Wear appropriate protective equipment (heat-proof clothing, etc.). Remove flammable substances from surroundings immediately. Fight fire from windward. Restrict the area around fire to unauthorized personnel and prevent secondary disaster. 6. ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures: Wear appropriate protective equipment (gloves, protective mask, apron, goggles, etc.). Collect the residual filament from the floor to prevent falls. Environmental precautions: Care should be taken to avoid environmental impacts caused by release to rivers, etc. Methods, materials for containment and cleaning up: Treat the contaminated materials and waste in accordance with the relevant laws and regulations. If released, sweep and collect in an empty container. Page 3 of 5
7. HANDLING AND STORAGE Handle in a well-ventilated area. It is recommended to install exhaust systems where many printers are used simulataneously. Keep away from fire (ignition source) and store at ambient temperature. Storage: Protect from water, moisture and direct sunlight and store indoors at ambient temperature and well-ventilated. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Protective equipment: Respiratory protection: Wear appropriate protective equipment to avoid inhalation or contact of gas generated from high temperature molten resin. Hand protection: Wear protective gloves. It is preferable to wear cotton work gloves or leather gloves when handling the melted resin. Eye protection: Wear protective glasses when handling. Skin and body protection: Wear clothing to avoid direct exposure of skin to molten resin. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Physical state: Solid (Filament Shape) Melting point/freezing point: 150 to 180 C (start melting) Auto ignition point (ignition point): 388 C Combustibility: Product is not self-igniting. Specific gravity (relative density): 1.15 to 1.35 g/cm 3 Solubility in water: Insoluble 10. STABILITY AND REACTIVITY Stability (possibility of hazardous reactions): Largely stable under normal storing/handling conditions. As the product is biodegradable, when subjected to heat, light and humidity it will gradually change colour and then decompose. Hydrolysis will occur. During decomposition, carbon hydride, aldehyde, other hazardous gases can be generated. Self-reactivity: None 11. TOXICOLOGICAL INFORMATION Acute toxicity (oral): Rat LD50 > 5,000 mg/kg Germ cell mutagenicity: AMES Test Negative 12. ECOLOGICAL INFORMATION Acute aquatic environmental hazards: Fish (Oryzias latipes) LC50 > 100 mg/l Persistence and Decomposition: Due to the biodegradable nature of the filament under environmental conditions hydrolosis and decomposition will occur. Page 4 of 5
13. DISPOSAL CONSIDERATIONS Do not dump into sewers, on the ground or into any body of water. Burn in an adequate incinerator or bury in landfill in accordance with applicable local, state, and federal regulations. 14. TRANSPORT INFORMATION Follow the instructions in HANDLING AND STORAGE. International regulation: UN classification: Not applicable to the dangerous goods under UN classification. Land transport: Follow all local regulations in your country. 15. REGULATORY INFORMATION Follow all regulations in your country. 16. OTHER INFORMATION The descriptions herein are based on the currently available sources and information but no guarantee is given for the integrity or accuracy regarding the given data and evaluation. The precautions herein are for normal handling. If you use this product under special conditions, take new safety measures appropriate for the use and usage. Page 5 of 5