The Convenient and Compact CR System for Veterinary Practices Fire CR+ 20 / 40 / 60 / 80 vet with a throughput of 20 to 70 cassettes per hour and the option of a space - saving wall mount
The small and fast CR system for digital X-Ray imaging in veterinary medicine The FireCR+ vet system is suitable for examinations with imaging plates both in small veterinary practices requiring only a few images per day as well as veterinary clinics dealing with large number of patients. Robust, compact, light weight and fast: in combination with the professional dicompacs DX-R image acquisition software, the CR system provides all the necessary image processing functions. The FireCR+ solution may be integrated into existing DR or DR systems and is therefore ideal as a second or additional system for high workloads in large clinics or university facilities. The dicompacs DX-R software in particular allows quick and easy working. Special emphasis was placed on maximum image quality and maximum flexibility. For example, the included professional image processing software dicompacs DX-R can be adapted very easily to the veterinarians specific wishes or requirements for each x-ray examination. The user is not limited to the selection of pre-set standards. The functionality provides the best possible image quality in accordance with the veterinarians needs. The creation of the best possible images, however, also requires the correct set up of the x-ray unit and the correct positioning of the patient. To help the x-ray assistant with this task, a multimedia radiographic positioning guide for each examination has been integrated directly into the system. It allows the user to verify, prior to taking the x-ray, how to correctly set up the x-ray image. Even videos on the positioning of a patient etc are included. This guide removes the need for radiographers to consult tables, reference books or external software programs. FireCR+ 20/40/60/80Vet
Highlights All the benefits of the FireCR+ Vet at a glance The FireCR+ Vet system is available in different versions FireCR+ CR20 vet: up to 20 plates / hour FireCR+ CR40 vet: up to 40 plates / hour Only About 30kg FireCR+ CR60 vet: up to 60 plates / hour FireCR+ CR80 vet: up to 70 plates / hour Lightweight: only weighs approx. 30kg. Unventilated unit: silent in standby mode, does not attract dust, animal hair etc. Robust: yet compact (dimensions: 11.7 x 46.4 x 70.3cm). High throughput: up to 70 cassettes per hour. Multiple formats available: 24 x 30cm and 35 x 43cm. Flexible use: as a compact stationary table system or a portable system. Optional: wall mount to save space. Easy to upgrade: cassette throughput can be easily increased without having to exchange equipment. Simple conversion to a DR system: customers can continue to use the same operating software - investment protection! Convenient transport: in a suitcase with wheels and a pull-out handle. Easy to operate.
Flexibility Place the unit in the perfect position! 1. Standard table Unit 2. Wall mounting as a space saving solution (optional)
Software Advantages of the professional dicompacs DX-R X-Ray acquisition software: Included Modern graphical user interface (GUI) adaptable to almost any language. Touchscreen operation to ensure quick and efficient work and a smooth workflow. Capture of patient data via DICOM worklist, BDT/GDT, or other protocols data may also be captured manually. Use of DICOM Procedure Codes for the transfer of all relevant examination data directly from the connected patient management system (HIS/RIS). Freely configurable body parts with more than 200 projections and numerous possible adjustments in human and veterinary medicine already included. Safe and fast registration of emergency patients. Allows the user to switch between examinations of a patient, for instance to avoid having to re-position the patient frequently. Special tool for veterinary medicine, such as an extra dialog box for patient and owner data, integrated hip dysplasia measuring, special image filters, TPLO, TTA, Buchanan s Vertebral Heart Score, distraction index, multi generator operation for alternating between mobile and stationary systems and much more Entry of recurring examination procedures as macros. Fully integrated radiographic positioning guide for each examination including comprehensive notes, photos and correct x-ray images. A single workstation with installed dicompacs DX-R software may be upgraded by the following options (selection): Direct control of the x-ray generator (generator control). Tools for taking images of an entire leg or a full spine (image stitching). Planning and working with digital prostheses templates/ operation planning. Connection of several diagnostic monitors. Capture of additional patient and examination data and their freely configurable statistical evaluation. Facilitates the use of a flat panel and an intraoral sensor.
Job creation Radiographic positioning guide Preview of the X-Ray image and worklist Viewer TTA measuring tool Buchanan s Vertebral Heart Score HD measuring technique for dogs TPLO measuring tool
Software Advantages of the professional dicompacs DX-R X-Ray acquisition software CR Unit Performance: (for 35 x 43cm / 14 x 17 ) System configuration: Time until the first image: Resolution: Weight: Dimensions (H x W x D): Power requirements: PC connection: USB 2.0 Regulatory approvals: FCC, UL and CE FireCR+ CR20 vet: up to 20 plates / hour FireCR+ CR40 vet: up to 40 plates / hour FireCR+ CR60 vet: up to 60 plates / hour FireCR+ CR80 vet: up to 70 plates / hour Top-table 49 seconds Data capture: 16-bits per pixel, 65,000 graytones 30kg (65lbs) 4.6 x 18.3 x 27.7 (117 x 464 x 703mm) 110/220/240V, 60/50cs, 150W dicompacs DX-R control Console Operating console (two options available), MS Windows 7 Professional, hardware stress test, software pre-installation, system checked and ready to use Option 1: Archive and diagnostic station* Option 2: Notebook* Intel Core Processor Intel Core Processor 4GB RAM DDR 4GB RAM DDR 2 x 500GB hard drive (RAID1) 500GB hard drive DVD+/-RW drive 1920 x 1080 pixel resolution 1000 Mbit network DVD+/-RW drive 1000 Mbit network Wireless LAN 802.11 a/b/g/n 39.6cm (15.6 ) ultra sharp FHD wide screen display
dicompacs DX-R acquisition and diagnostic software dicompacs DX-R is an acquisition, diagnostic and archiving software including an integrated professional PACS viewer with image editing, measuring and export options, image printing, freely configurable user interface and much more. Operation via touch screen. More than 200 integrated X-Ray settings. Integrated multimedia radiographic positioning guide for each examination including photos, videos and examples of correct X-Ray images. Capturing of macros for recurring examination processes. Option to display the recommended X-Ray settings for each examination (kvp, ma, mas etc.) in accordance with the generator used. Extensive image processing can be adapted to the customer s individual requirements for each examination (CoP). Automatic black mask functionally. Querying a DICOM Worklist (SCU). Backup module. Automatic removal of grid lines when fixed grids are used. Creation of patient CDs. Direct connection of other viewing stations with minipacs function. Many other functions are available as options: Image transfer to PACS system (DICOM store). X-ray generator control. DICOM Basic Print. Digital X-ray journal. Integration of several diagnostic evaluation monitors. Image stitching (tool for generating full leg/full spine images). Pre-operative planning with prosthesis documentation module. Wall mounting for CR unit. System upgradable to a networked image management system (PACS). And much more... Suitcase The FireCR+ requires very little space and is therefore also suitable for mobile use. Easy to set up and well padded in a sturdy suitcase, it is ideal for vehicle transport and mobile use, e.g. in horse stables. The transport suitcase is equipped with wheels and a pull-out handle.
Image processing Automatic image processing for optimal quality Perfect images at all times generally no adjustment required. Integrated software for automatic image optimisation. Professional, adaptable image processing for each individual examination to obtain best possible image settings for the needs of each customer. Due to specially developed processors, the image processing allows the user to vary the X-Ray setting on a large scale while the image quality remains virtually the same (possibility of reducing the dosage). Bones and soft tissue in one image - this enables the user to significantly improve his diagnosis. Details of bones and microstructures are very easy to recognise. Noise suppression. Black mask (automatic shutters). Cropping of images (crop function). Automatic removal of grid lines when using fixed grids. Exposure with standard image processing Exposure with dicompacs DX-R image processing
Investment Protection: If you wish to create your X-Ray images with a flat panel system (DR= Direct Radiography) at a later stage, you only have to exchange the FireCR+ CR system for a flat panel, dicompacs DX-R is already designed to implement such a connection. You will not need to purchase new software or to get used to a new user interface. This is what we call investment protection. Built-In Flexibility! The dicompacs DX-R software already includes all functions necessary to store X-Ray images and provide them to other workstations as a standard feature. Other workstations in your practices network may load these images directly and display them. This requires just one dicompacs Diagnostic Module Standard (optional extra) per workstation. Of course, the images can also be sent to an existing PACS system.
Vet Portfolio Overview products of OR Technology X-Ray Acquisition Software (only for OEMs) - acquisition and diagnostic software for X-Ray images from flat panels or CR systems. CR solutions - CR systems for Digital X-Ray with cassettes. The Standard for Digital Radiography - Designed specifically to optimize your efficiency. Image quality, and return on investment. Atomscope High Frequency Portable X-ray unit with inverter system for Veterinarians. Southern Office: PO Box 4438, 17-19 Horne Street, Hoppers Crossing VIC 3029 Ph: 0393609700 Fax: 0393609994 Toll Free: 1300785405 Email: info@dlc.com.au Northern Office: PO Box 833, Unit 6/1 Lear-Jet Drive, Caboolture QLD 4510 Ph: 0754283666 Fax: 0754283777 Toll Free: 1300785401 Email: qld@dlc.com.au