Ethernet over Copper Transmission Extenders Ethernet Transmission over Existing Coaxial or Cat5 Cable
CopperLine is an advanced and unique technology that extends Ethernet networks beyond the 100 meter (328 foot) limitation encountered when using Cat5 cable for IP Video and IT specifications. CopperLine is a cost-saving alternative that enables you to use existing coaxial cable and UTP cables over longer distances. Choose CopperLine: Longest Available Transmission Distances Fixed Data Rate at Maximum Specified Distance Consumes Less than 2.5 Watts per Port All UTP and Coaxial Cable Models Support Pass-Through PoE Price and Performance CopperLine
Easy extension path extends Ethernet Networks beyond 100 m (328 ft) limitation for CCTV and IT projects Saves cost and time avoids expense of new Ethernet network equipment Switch-selectable LAN rate - optimizes the best possible rate/distance for each installation High data rate ideal for high bandwidth requirements of mega-pixel cameras or multiple IP cameras Small package fits inside most camera housings Compatible with any LAN device fully transparent to Ethernet networks and higher layer protocols Easy to install - no IP address programming or other network setup required LED Indicators provide link status and data rate Consumes less than 2.5W per port can share power supply with camera Supports one or four pairs of UTP wires Uses a unique state-of-the-art data transmission technology Meets NEMA TS-1/TS-2 and Caltrans Standards Limited lifetime warranty Designed and made in the USA
Ethernet over Copper Transmission Extenders Ethernet over Copper Product Selector Single Port CopperLine over UTP NVR PoE Switch CLFE1UTP Multi Port CopperLine over UTP CLFE16UTP NVR PoE Switch Single Port CopperLine over Coax NVR PoE Switch CLFE1COAX Multi Port CopperLine over Coax CLFE16COAX NVR PoE Switch CopperLine 4-Port Switch Extended over UTP or Coax CLFE16UTP 3,000ft (914m) Cat-5 OR 5,000ft (1524m) Coax CLFE16COAX NVR PoE Switch CopperLine Managed High Power Midspan NVR CLFE1UTP Switch CLFE16IPS CLFE1COAX COPPERLINE
Ethernet over Existing Coax or UTP 3,000ft (914m) Cat-5 CLFE1UTP 328ft (100m) Cat-5 PoE Camera 3,000ft (914m) Cat-5 CLFE1UTP 328ft (100m) Cat-5 PoE Camera 5,000ft (1524m) Coax CLFE1COAX 328ft (100m) Cat-5 PoE Camera 5,000ft (1524m) Coax CLFE1COAX 328ft (100m) Cat-5 PoE Camera CLFE4US1TPC 328ft (100m) Cat-5 IP Cameras IP Cameras 3,000ft (914m) Cat-5 CLFE1UTP Data + Power PoE Camera 5,000ft (1524m) Coax Data +Power CLFE1COAX PoE Camera MADE IN THE USA LIFETIME WARRANTY
Ethernet over Copper Transmission Extenders CopperLine 10/100TX Ethernet over Unshielded Twisted Pair (UTP) Part Number CLFE1UTP CLFE4UTP CLFE8UTP CLFE16UTP Description Ethernet over UTP + Pass-through PoE 4 CH Ethernet over UTP + Pass-through PoE 8 CH Ethernet over UTP + Pass-through PoE 16 CH Ethernet over UTP + Pass-through PoE Transmits individual Ethernet data channels with Pass-through PoE over standard Cat5 UTP cable Extends Ethernet up to 3,000 feet (914 m) over UTP Extended temperature operation from -40C to +75C High-data rate, ideal for the high bandwidth requirements of mega-pixel cameras, multiple IP cameras systems, and cameras requiring jumbo frame transmission COPPERLINE
Ethernet over Existing Coax or UTP Copperline 10/100TX Ethernet over coaxial cable Part Number Description CLFE1COAX Ethernet over coaxial cable + Pass-through PoE CLFE4COAX 4 CH Ethernet over coaxial cable + Pass-through PoE CLFE8COAX 8 CH Ethernet over coaxial cable + Pass-through PoE CLFE16COAX 16 CH Ethernet over coaxial cable + Pass-through PoE Transmits individual Ethernet data channels with Pass-through PoE over standard 75 ohm coaxial cable. Extends Ethernet up to 1524 m (5,000 ft) over coaxial cable Extended temperature operation from -40C to +75C Extended Pass-through PoE meets the IEEE 802.3af and 802.3at standard for Power over Ethernet MADE IN THE USA LIFETIME WARRANTY
Ethernet over Copper Transmission Extenders CopperLine Extender Ethernet Switch Four-Port 10/100TX Aggregation Switch with Single coaxial cable or UTP Output Port Part Number CLFE4US1TPC Description 4-Port Switch + extended uplink over coaxial cable or UTP The ComNet CopperLine CLFE4US1TPC is an unmanaged Ethernet switch that combines four individual Ethernet data channels over a single standard 75 ohm coaxial cable or Cat5 UTP cable. 4-port unmanaged switch combines four individual Ethernet data channels over a single standard coaxial cable or UTP cable Extends Ethernet distances: up to 5,000 feet (1524 m) over coaxial cable; or up to 3000 feet (914 m) over standard Cat5 UTP High Density: High (4) channel count within a very small package; ideal for those installations where equipment cabinet space is limited Can be powered using 12 Volts DC or 24 Volts AC COPPERLINE
Ethernet over Existing Coax or UTP Copperline High-Power Mid-Span Injector Part Number CLFE8IPS CLFE16IPS Description 8-Port, High-Power PoE Midspan Injector 16-Port, High-Power PoE Midspan Injector The ComNet CopperLine CLFE8IPS and CLFE16IPS are 8- and 16-port high power PoE midspan power injectors. They meet the IEEE 802.3af and 802.3at standards and deliver up to 37W per port without requiring power management. 8 or 16 ports of IEEE 802.3af and IEEE 802.3at compliant PoE for 10/100/1000 Base-T networks Delivers up to 37W per port simultaneously on all ports, no power management required Automatically senses the powered device (PD) power class MADE IN THE USA LIFETIME WARRANTY
Ethernet over Copper Transmission Extenders Copperline Accessories Part Number CLSETUP CLESP Description PoE Setup Tool Single Port Ethernet Surge Protector The ComNet CopperLine CLESP provides voltage surge and transient protection for Ethernet equipment from conditions such as lighting strikes, power fluctuations or other transient events. The CLSETUP provides a simple way to setup and focus PoE-powered IP cameras, and is an ideal diagnostic tool for installers working with both CCTV and IT PoE-based systems. COPPERLINE
Fiber Optic Video, Audio and Data Transmission Products ComNet offers a comprehensive selection of single and multiple channel video and data transmission products as well as serial data and audio transmission products designed to the specific requirements for Access Control, Intrusion, Burglar and Fire Alarms and CCTV Surveillance/ Incident Detection and the Intelligent Transportation Systems (ITS) market. ComNet manufactures a complete line of in-dome video and data and Ethernet fiber optic modules for many of today s leading CCTV manufacturers. Technical Support The ComNet Technical Support and Design Center provides pre-sale and post-sale support for Ethernet transmission network and fiber optic system design. The department is staffed by some of the most highly experienced, regarded and recognized experts in the industry. Our direct Design Center phone number is 1 (888) 678-9427 or call 1 (203) 796-5300 and ask for the Design Center, or contact us by Email at designcenter@comnet.net. USA: 3 CORPORATE DRIVE DANBURY, CT 06810 USA T: 1 203 796-5300 F: 1 203 796-5303 TECH SUPPORT: 1 888 678-9427 INFO@COMNET.NET UK: 8 TURNBERRY PARK ROAD GILDERSOME MORLEY LEEDS, UK LS27 7LE T: +44 (0)113 307 6400 F: +44 (0)113 253 7462 INFO-EUROPE@COMNET.NET For more information on the complete line of ComNet products please visit www.comnet.net. 2012 Communication Networks. All Rights Reserved. ComNet, the ComNet Logo, CopperLine and the CopperLine Logo are registered trademarks of Communication Networks. ComNetB8 Rev2 06.12