MATERIAL SAFETY DATA SHEET 1. Product and Company Identification Product identifier Version # 02 Issue date 10-17-2014 Revision date 03-24-2015 Supersedes date 10-17-2014 CAS # Sudzz Economy Car Wash Mixture Product Code 1355 Product use Manufacturer information Supplier Vehicle Wash Presta Products 361 Fairview Ave Barberton, OH 44203 United States msdsinfo@malcopro.com www.presta.com Phone 800-253-2526 Fax 330-777-8317 Phone 1-800-424-9300 2. Hazards Identification Emergency overview WARNING Potential health effects Routes of exposure Eyes Skin Inhalation Ingestion Inhalation. Ingestion. Skin contact. Eye contact. Do not get this material in contact with eyes. Do not get this material in contact with skin. Do not breathe dust/fume/gas/mist/vapors/spray. Do not ingest. 3. Composition / Information on Ingredients Components CAS # Percent "Sulfonic Acids, C14-16-alkane Hydroxy And C14-16-alkene, Sodium Salts" Other components below reportable levels 68439-57-6 1-5 60-100 4. First Aid Measures First aid procedures Inhalation Skin contact Eye contact Ingestion tes to physician Move to fresh air. Oxygen or artificial respiration if needed. Do not use mouth-to-mouth method if victim inhaled the substance. Induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Call a physician or poison control center immediately. Remove and isolate contaminated clothing and shoes. Immediately flush skin with plenty of water. Get medical attention immediately. For minor skin contact, avoid spreading material on unaffected skin. Wash clothing separately before reuse. Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention immediately. IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. Rinse mouth thoroughly. Do not induce vomiting without advice from poison control center. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs. Do not use mouth-to-mouth method if victim ingested the substance. Induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Symptoms may be delayed. 1 / 5
General advice 5. Fire Fighting Measures Flammable properties Extinguishing media Suitable extinguishing media Unsuitable extinguishing media Fire fighting equipment/instructions Explosion data Sensitivity to static discharge Sensitivity to mechanical impact Hazardous combustion Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves. t flammable by WHMIS criteria. Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2). Do not use water jet as an extinguisher, as this will spread the fire. 6. Accidental Release Measures Personal precautions Methods for containment Methods for cleaning up Keep unnecessary personnel away. Keep upwind. Keep out of low areas. Fully encapsulating, vapor protective clothing should be worn for spills and leaks with no fire. Ventilate closed spaces before entering them. For personal protection, see section 8 of the MSDS. Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Cover with plastic sheet to prevent spreading. Absorb in vermiculite, dry sand or earth and place into containers. Following product recovery, flush area with water. Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination. Never return spills to original containers for re-use. For waste disposal, see section 13 of the MSDS. 7. Handling and Storage Handling Storage Do not breathe dust/fume/gas/mist/vapors/spray. Do not get this material in contact with eyes. Do not get this material in contact with skin. Do not get this material on clothing. Do not use in areas without adequate ventilation. Wear positive pressure self-contained breathing apparatus (SCBA). Wear personal protective equipment. Wash thoroughly after handling. Store in a closed container away from incompatible materials. Store in a well-ventilated place. Keep container dry. Store away from incompatible materials (see Section 10 of the MSDS). 8. Exposure Controls / Personal Protection Occupational exposure limits Biological limit values Engineering controls Personal protective equipment Eye/face protection exposure limits noted for ingredient(s). biological exposure limits noted for the ingredient(s). Ensure adequate ventilation, especially in confined areas. Face-shield. Skin protection Respiratory protection Hand protection Wear chemical protective equipment that is specifically recommended by the manufacturer. It may provide little or no thermal protection. Wear positive pressure self-contained breathing apparatus (SCBA). Wear protective gloves. 9. Physical & Chemical Properties Appearance Clear. Viscous. Physical state Liquid. Form Liquid. Color Pink. 2 / 5
Odor Odor threshold ph 7.5 Vapor pressure Vapor density Boiling point Melting point/freezing point Solubility (water) Specific gravity Relative density Flash point Flammability limits in air, upper, % by volume Flammability limits in air, lower, % by volume Auto-ignition temperature Evaporation rate Viscosity Viscosity temperature Other data Density Bubble gum. 0.00001 hpa estimated 700 cp 68 F (20 C) 8.44 lb/gal 10. Chemical Stability & Reactivity Information Chemical stability Conditions to avoid Incompatible materials Hazardous decomposition Possibility of hazardous reactions 11. Toxicological Information Material is stable under normal conditions. Contact with incompatible materials. Toxicological data Acute effects Sensitization Chronic effects Carcinogenicity Skin corrosion/irritation Serious eye damage/irritation Mutagenicity Reproductive effects Teratogenicity Synergistic materials data available. t expected to be hazardous by WHMIS criteria. 12. Ecological Information Ecotoxicological data Components Species "Sulfonic Acids, C14-16-alkane Hydroxy And C14-16-alkene, Sodium Salts" (CAS 68439-57-6) Aquatic Crustacea EC50 Water flea (Ceriodaphnia dubia) Test Results 4.14-4.95 mg/l, 48 hours Ecotoxicity Environmental effects 3 / 5
Aquatic toxicity Persistence and degradability 13. Disposal Considerations Disposal instructions Waste from residues / unused Contaminated packaging 14. Transport Information TDG t regulated as dangerous goods. IATA t regulated as dangerous goods. IMDG t regulated as dangerous goods. 15. Regulatory Information Canadian regulations WHMIS status WHMIS classification WHMIS labeling Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Dispose in accordance with all applicable regulations. Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see: Disposal instructions). Empty containers should be taken to an approved waste handling site for recycling or disposal. Since emptied containers may retain product residue, follow label warnings even after container is emptied. This product has been classified in accordance with the hazard criteria of the CPR and the MSDS contains all the information required by the CPR. Controlled D2B - Other Toxic Effects-TOXIC International Inventories Country(s) or region Inventory name On inventory (yes/no)* Australia Australian Inventory of Chemical Substances (AICS) Canada Canada China Europe Europe Japan Korea New Zealand Philippines Domestic Substances List (DSL) n-domestic Substances List (NDSL) Inventory of Existing Chemical Substances in China (IECSC) European Inventory of Existing Commercial Chemical Substances (EINECS) European List of tified Chemical Substances (ELINCS) Inventory of Existing and New Chemical Substances (ENCS) Existing Chemicals List (ECL) New Zealand Inventory Philippine Inventory of Chemicals and Chemical Substances (PICCS) United States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory *A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s) A "" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing country(s). 16. Other Information NFPA ratings Health: 0 Flammability: 0 Instability: 0 4 / 5
Disclaimer Prepared by Revision Information Malco Automotive cannot anticipate all conditions under which this information and its product, or the of other manufacturers in combination with its product, may be used. It is the user s responsibility to ensure safe conditions for handling, storage and disposal of the product, and to assume liability for loss, injury, damage or expense due to improper use. The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. Composition / Information on Ingredients: Component Summary Physical & Chemical Properties: Multiple Properties Regulatory Information: Risk Phrases - Labeling GHS: Classification 5 / 5