WinCC / PerformanceMonitor V7.2 Production analysis and improvement through individual key performance indicators siemens.com/wincc Answers for industry.
Targeted productivity increase... The WinCC / PerformanceMonitor facilitates the flexible calculation and powerful analysis of plant-specific key performance indicators (KPIs), on the basis of which improvements can be made for a targeted increase in productivity. The PerformanceMonitor addresses all user groups, from engineers to maintenance to the management level. The application environment integrated in WinCC enables the engineer to develop individual formulas for the calculation of KPI s. No additional know-how is required in this context. In the maintenance department, the KPI s can be analysis using bar graph (performance), trend chart (Gantt) and tabular format. On the management level, web-based reporting is used without needing WinCC on standard computers. The additionally acquired information is embedded in the WinCC Screen on the machine itself. The relationship of key performance indicators with plant data facilitates the understanding of more accurate production control e.g. availability and usage of the equipment.
... through systematic analysis with the WinCC / PerformanceMonitor also via the Internet Three different options are available for analyzing the key performance indicators and the corresponding data. In the performance diagram, KPI s can be represented in a graphical manner. Adjustable time ranges, graphical comparision and drill-down to the data of KPI s support effective analysis. The Gantt diagram shows the data on a time based trend. Data can be shown in the table diagram and corrected and commented if required.
Target group-oriented reports The SIMATIC Information Server facilitates the web-based preparation and display of individual reports. Including sending out reports via e-mail. Further increase your plant s productivity! Plant-specific KPI s indicators and intelligent production reports allow for a faster identification of production slowdowns, enabling you to take immediate action. Optimize your plant now! And benefit from the WinCC Analyze and Reporting Starter Package consisting of the basic packages WinCC / PerformanceMonitor and SIMATIC Information Server 2013.
High productivity with individual key performance indicators The WinCC / PerformanceMonitor helps to identify the weak spots in production workflows and the improvement potentials. Flexible application Individual calculation of plant-specific KPI s using SIMATIC WinCC Easy operation Ease of use and familiarity through integration in SIMATIC WinCC Understanding production relationships Context-based detection of KPI s, e.g. supplier quality Transparent representation Analysis of KPI s in SIMATIC WinCC as performance, Gantt or table diagram veiwable within the project of via the internet with WinCC/WebNavigator Conclusive analyses Target group-oriented analysis reports with the SIMATIC Information Server Expandability as required Easy integration in existing WinCC plants
Selection and ordering data Ordering data Order number WinCC / PerformanceMonitor V7.2 Basic package, incl. 30 PerformanceMonitor ArchiveTags 6AV6372-2DG07-2AA0 30 PerformanceMonitor ArchiveTags (additive) 6AV6372-2CG27-2BA0 100 PerformanceMonitor ArchiveTags (additive) 6AV6372-2CG27-2CA0 300 PerformanceMonitor ArchiveTags (additive) 6AV6372-2CG27-2DA0 1000 PerformanceMonitor ArchiveTags (additive) 6AV6372-2CG27-2EA0 WinCC Analyze and Reporting Starter Package (until 09/30/2014) 6AV6372-2DG77-2AA0 Consisting of the basic packages WinCC / PerformanceMonitor and SIMATIC Information Server 2013 Upgrade WinCC / DowntimeMonitor V6.2 / 7.0 to WinCC PerformanceMonitor V7.2 (incl. 30 PerformanceMonitor ArchiveTags) 6AV6372-2DG87-2AA0 SIMATIC WinCC take a look! The information provided in this brochure contains merely general descriptions or characteristics of performance which in actual case of use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. All product designations may be trademarks and product names of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners. Siemens AG Industry Sector Industry Automation Systems Factory Automation P.O. Box 48 48 90026 NUREMBERG GERMANY Subject to change 11/13 Order No.: E20001-A780-P810-X-7600 Dispo 06333 SCHÖ/49528 1102088355 SB 11131. Printed in Germany Siemens AG 2013