hp OpenView storage data protector. EMC split-mirror backup integration Version:. Date: November, 00 The EMC Split-Mirror Backup Integration is on the following Operating Systems: HP-UX (PA-RISC) : HP-UX.0, HP-UX., HP-UX. & HP-UX.1 HP-UX (Itanium) : HP-UX. Windows : Windows 000 The operating system doesn't need to be identical on both Application and Backup Hosts. However, it must be either HP-UX (PA-RISC) on both or HP-UX (Itanium) on both or Windows on both. The EMC Symmetrix Integrated Cached Disk Array system (ICDA) must run the Enterprise Backup Solutions Enabler from EMC. Following is the list of Supported versions: 1. HP-UX (PA-RISC) : Version. up to.0.. HP-UX (Itanium) : Version.0 and above.. Windows : Version. up to.0. All versions of TimeFinder and/or SRDF and microcode by the above versions of the EMC software are. New versions of the microcode or the Enterprise Backup software will be tested and certified if needed. Please note that EMC Symmetrix including DMX arrays are. For the following matrices, only those combinations of Applications & Operating Systems are that are by the respective vendors. configurations HP-UX (PA-RISC) Integrations on HP-UX.0 (DMX not ) TimeFinder 1 dual host SRDF SRDF/TF TimeFinder (combined) Raw disk and raw logical volume (disk Supported Supported Supported Supported image) VxFS, HFS file system offline Supported Supported Supported Supported Oracle.0.x,.1.x RMAN offline or Not Supported Supported Supported online
SAP R/.1G + brbackup.0x Not Supported Supported Supported SAP R/.0x + brbackup.0x SAP R/.x + brbackup.x SAP R/.x + brbackup.x offline or online 1 BCV mirror is created inside one ICDA. BCV mirror is being backed up on the application (There is no backup ) disk). Backup host is connected to secondary ICDA (R disk). Two ICDAs (R1 and R) are connected with SRDF links. Application host is connected to the R1 disk. Backup host is connected to the BCV mirror of the R disk. Same as note (disk image), except that it is more convenient to specify and Data Protector backup Archive logs are backed up in the standard way on the application This includes all later sub-versions. For example,.1g includes.1i. 1 Only the functionality in Oracle i is currently. New features released in Oracle g will be at a later date. Restore from Data Protector GUI is not yet. For HP-UX.1 (PA-RISC), currently Orcle and SAP are not as the support for these has not been released by the vendors. These will be certified when the support is available. configurations HP-UX (PA-RISC) Integrations on HP-UX. &. 1,.1 1 TimeFinder dual host SRDF SRDF/TF TimeFinder (combined) Raw disk and raw logical volume (disk Supported Supported Supported Supported image) VxFS file system offline Supported Supported Supported Supported Oracle g RMAN offline or online,1 Not Supported Supported Supported SAP Brtools.0 offline or online, Not Supported Supported Supported SAP Brtools.0 offline or online, Not Supported Supported Supported
1 To utilize this feature, following patches are needed: For Solaris Cell Manager: DPSOL_00 For HP-UX (PA-RISC) Cell Manager: PHSS_ For HP-UX (Itanium) Cell Manager: PHSS_ BCV mirror is created inside one ICDA. BCV mirror is being backed up on the application (There is no backup ) disk). Backup host is connected to secondary ICDA (R disk). Two ICDAs (R1 and R) are connected with SRDF links. Application host is connected to the R1 disk. Backup host is connected to the BCV mirror of the R disk. Same as note (disk image), except that it is more convenient to specify and Data Protector backup Archive logs are backed up in the standard way on the application 1 Only the functionality in Oracle i is currently. New features released in Oracle g will be at a later date. Restore from Data Protector GUI is not yet. 1 Following soft links and kerenel parapeters are required: 1. Soft link of ln s /usr/lib/libsymapimt.sl /usr/lib/libsymapi.sl and ln s /usr/lib/libsymlvmmt.sl /usr/lib/libsymlvm.sl created due to new shared library name has introduced in Solution Enabler..0. Without these link./syma won t work.. A soft link of ln s /usr/sbin/kctune /usr/sbin/kmtune done on both application host and backup. The kernel configuration parameter maxvgs value was set to on both application host and backup host by using the command #/usr/sbin/kctune u maxvgs=. configurations HP-UX (Itanium) Integrations on HP-UX. 1 TimeFinder dual host SRDF SRDF/TF TimeFinder (combined) Raw disk and raw logical volume (disk Supported Supported Supported Supported image) VxFS File system offline Supported Supported Supported Supported Oracle g RMAN offline or online,1 Not Supported Supported Supported SAP Brtools.0 offline or online, Not Supported Supported Supported
SAP Brtools.0 offline or online, Not Supported Supported Supported 1 To utilize this feature, following site specific patches are needed: PHSS_ - HP-UX.x (PA) Cell Manager / Installation Server PHSS_ - HP-UX. (IPF) Cell Manager / Installation Server DPSOL_00 - Solaris.x Cell Manager / Installation Server BCV mirror is created inside one ICDA. BCV mirror is being backed up on the application (There is no backup ) disk). Backup host is connected to secondary ICDA (R disk). Two ICDAs (R1 and R) are connected with SRDF links. Application host is connected to the R1 disk. Backup host is connected to the BCV mirror of the R disk. Same as note (disk image), except that it is more convenient to specify and Data Protector backup Archive logs are backed up in the standard way on the application 1 Only the functionality in Oracle i is currently. New features released in Oracle g will be at a later date. Restore from Data Protector GUI is not yet. Data Protector. also supports the EMC Geospan product for High Availability Clustering using the Microsoft Cluster Server. EMC Geospan needs dual host TimeFinder and the Geospan setups are listed in the table below. Additionally the table below also represents the ZDB support for EMC Symmetrix on Windows in addition to the ones by Geospan: configurations Windows (-bit) integrations on Windows 000 (DMX not ) TimeFinder 1 dual host SRDF/TF SRDF TimeFinder (combined) Raw disk and raw logical volume (disk Supported image) NTFS file system offline Supported Oracle.1.x RMAN offline or online Not
Oracle i RMAN offline or online Not MS SQL Server 000 Not 1 BCV mirror is created inside one ICDA. BCV mirror is being backed up on the application (There is no backup ) disk). Backup host is connected to secondary ICDA (R disk). Two ICDAs (R1 and R) are connected with SRDF links. Application host is connected to the R1 disk. Backup host is connected to the BCV mirror of the R disk. Same as note (disk image), except that it is more convenient to specify and Data Protector backup Archive logs are backed up in the standard way on the application configurations Windows integrations on Windows 00 (-bit) TimeFinder 1 dual host TimeFinder SRDF SRDF/TF (combined) Raw disk and raw logical volume (disk Supported image) NTFS file system offline Supported Oracle g RMAN offline or online SAP Brtools.0 offline Not, or online MS-SQL000 MS-SQL00 Not Not Not
1 BCV mirror is created inside one ICDA. BCV mirror is being backed up on the application (There is no backup ) host is connected to the BCV. disk). Backup host is connected to secondary ICDA (R disk). Two ICDAs (R1 and R) are connected with SRDF links. Application host is connected to the R1 disk. Backup host is connected to the BCV mirror of the R disk. and unmount the file system. Same as note (disk image), except that it is more convenient to specify and Data Protector unmounts the file system on the application host before the split. backup Archive logs are backed up in the standard way on the application To utilize this feature, please install Site specific Patch : SSPNT0_ configurations Windows integrations on Windows 00 (Itanium) TimeFinder 1 dual host TimeFinder SRDF SRDF/TF (combined) Raw disk and raw logical volume (disk Supported image) NTFS file system offline Supported Oracle g RMAN offline or online Not SAP Brtools.0 offline or online, Not MS-SQL000 Not MS-SQL00 Not
1 BCV mirror is created inside one ICDA. BCV mirror is being backed up on the application (There is no backup ) host is connected to the BCV. disk). Backup host is connected to secondary ICDA (R disk). Two ICDAs (R1 and R) are connected with SRDF links. Application host is connected to the R1 disk. Backup host is connected to the BCV mirror of the R disk. and unmount the file system. Same as note (disk image), except that it is more convenient to specify and Data Protector unmounts the file system on the application host before the split. backup Archive logs are backed up in the standard way on the application To utilize this feature, please install Site specific Patch : SSPNT0_ volume managers Operating System Volume Manager HP-UX LVM VxVM Windows Disk Manager