Drain Cleaning & Testing equipment

Drain Cleaning & Testing equipment

Within this catalogue you will find detailed information regarding the comprehensive range of Bailey drain cleaning rods, duct rods and drain testing equipment. The drain and chimney cleaning rods are supplied in four diameters, various lengths and colours, with either universal or lockfast joints. The Bailey Blue rods are covered by international trademarks and are renowned world-wide for their quality, durability and strength. To complement the rods there is a wide range of tools and brushes available to cover virtually any application. A range of drain test plugs are supplied in sizes from 5mm to 2000mm in steel, aluminium or nylon. Canvas air bags and other testing products are also available. A range of duct rods for cable laying, produced to BT specifications, together with coupling up pieces, leaders and followers and adaptors are also manufactured. Clearing Wheel: Guides rods around difficult bends and removes minor blockages by pushing material clear. The products enjoy an international reputation for quality and are endorsed by a long list of both national and international companies who specify these products as their preferred choice. These include public utilities, water authorities, national and local government, multi-national civil engineering companies, international construction companies and professional tradesmen. This diverse customer base extends to over 30 countries worldwide. Manufacturing quality of the company s products is of the highest standard and has been attained through years of experience and expert knowledge of the industry. Continuation of these traditional standards is essential and since 99 the company has operated a certified quality management system and is currently registered to ISO 900:2008, certifying its ability to supply quality products at a consistent level. With a fully integrated manufacturing facility the company is able to carefully control the quality standards of each component prior to final assembly. The manufacturing skills extend to hot brass stamping, metal pressings, machined components and plastic extrusion. The products in this catalogue are the most popular standard items but the company is able to offer many variations or specials to meet customers individual requirements. For further information in respect of this or if you wish to discuss any aspect of the company s products, please contact the sales office who will be able to assist you or arrange for a local representative to visit your office. Drop Scraper: Glides over small obstructions and drops into vertical scraping position to allow offending material to be dragged back towards the operator. Liverpool Street Digbeth Birmingham, B9 4DS Tel: 02 380 8000 Fax: 02 380 8020 Double Worm Screw: Pierces blockages such as paper or rags and the obstruction is drawn back to clear the pipe. Email: sales@bailey-products.com Website: www.bailey-products.com All Bailey products are supplied subject to Conditions of Sale, copies of which are available on request. Carriage and settlement terms:- UK mainland orders over 00.00 are carriage paid. Orders less than 00.00 are subject to a delivery and packing surcharge of 7.25. Monthly account nett. Plunger: Builds up pressure of water which forces obstruction clear. ALL PRICES ARE SUBJECT TO VAT AT CURRENT RATE.

PAGE DRAIN AND CHIMNEY RODS All Blue Rods Polypropylene Rods 2 ACCESSORIES FOR RODS Clearing Wheel Drop Scraper Double Worm Screw Plunger Cup & Screw Rotating Handle Harpoon 3 Retrieving Tool Boring Tool Archimedean Screw Spear Head Chisel Crown Root Cutter 4 CLEANING ROD SETS Cleaning Rod Set in Rigid Plastic Case Cleaning Rod Set in Blue Carry Bag 5 DRAIN ROD MERCHANDISER UNITS 2 Tools 3 Tools 4 Tools Rod Sets 6 CLEANING BRUSHES Drain, Chimney and Flue Brushes Drain and Sweep s Brushes, Wooden Stock Drain and Sweep s Brushes, Plastic Stock Wire Tube Brushes Brass Adaptors 7 PIPE & FLUE CLEANING RODS & TOOLS Coiled Spring Rods Coiled Spring Rod Leading Coil Spring Rod Key 8 SEWER CLEANING RODS & TOOLS Steelflex Rods Steelflex Rods Flexible Coil Spring Leading Rod Steelflex Tools Rotating Handle Locking Spanner 9 STEELFLEX ACCESSORIES Suitable 8/0mm Rods Clearing Wheel Drop Scraper Double Worm Screw Rubber Plunger Crown Root Cutter Wire Tube Brush Spear Head Chisel Boring Tool Retrieving Tool 0 DRAIN TESTING PLUGS AND EQUIPMENT Centre Locking Rim Fastening AIR TEST Testing Procedure WATER TEST Testing Procedure 2 DRAIN TEST PLUGS Steel, Centre Locking Aluminium, Centre Locking Nylon, Centre Locking PAGE 3 DRAIN TEST PLUGS Steel, Double Seal Drain Test Plugs Operating Pressures 4 Steel, Twin Port Rim Fastening Drain Test Plugs Rim Fastening Drain Test Plugs - Operating Instructions 5 DRAIN TESTING EQUIPMENT Drain Test Kit Hand Bellows Air Gauges U Gauge Tubing Y Pieces Test Nipple Caps Plug Caps 6 Canvas Air Bag Inflatable PVC Plugs Inflator Pumps 7 Drain Testing Equipment Drain Testing Dyes, 200g Jars Smoke Testers Smoke Pellets 8 Sewer Tools - Gully Grabs Gully Grabs 9 PLUMBER S HAND TOOLS Force Cups Pipe & Sink Cleaner 20 DUCT RODING EQUIPMENT AND ACCESSORIES FOR CABLE LAYING Duct Rods for Cable Laying Ferret PVC Rod Glass Fibre Rod Coiled PVC Rod Coupling for Duct Rod No.3 2 Coupling-Up Pieces (Marrying Sets) Coupling-Up Pieces 22 Adaptors Leaders and Followers Ferret Leader and Follower 2" Leader and Follower Steel Leader and Follower 2" with Spring Bellmouth Split Measuring Poles Rod clearance Set Telescopic Clearance Set Hollow Pole Riggers 23 DUCT AND CONDUIT CONTINUOUS RODS Rod Size 4.5mm Rod Size 6 mm Rod Size 9 mm Rod Size mm Rod Size 4mm 24 THREADED ROD END ACCESSORIES Brass Male Rod End Fittings Brass Female Rod End Fittings Tapered Rod End Jointed Ferrule, Brass Swivel Connector Reel and Frame Repair Kit

DRAIN & CHIMNEY RODS Blue Rods, Polypropylene - These Rods are generally acknowledged as the best quality cleaning rods available which are specified on a world wide basis and are the preferred choice of professionals. Blue Rods have earned an international reputation for their reliability, strength, rigidity and the right amount of flexibility. They have been developed through many years of constant research and development, the rods are manufactured from the highest grade of polypropylene whilst the joints are manufactured from solid brass. To ensure strength and durability during use the brass joints are securely fitted to the rods by brass rivets. Blue Rods - Carry the Bailey name and this combination is your guarantee of quality. Both the Bailey name and the colour blue, in respect of drain rods, are covered by international trademarks. Joints - All rods are offered with two types of joints, either Universal or Lockfast: Universal Rods fitted with this type of joint should only be rotated in a clockwise direction. Lockfast Rods fitted with this type of joint can be rotated in either direction and will remain secure in the most demanding conditions. Universal joint Lockfast joint Dia. 3 4"(9mm) 7 8"(22mm) "(25mm) 8"(28mm) 3 4"(9mm) 7 8"(22mm) "(25mm) 8"(28mm) Length 3' 600 60 602 603 604 605 606 607 4' 609 65 62 627 633 639 645 65 6' 6 67 623 629 635 64 647 653 m 608 64 620 626 632 638 644 650.5m 60 66 622 628 634 640 646 652 2m 62 68 624 630 636 642 648 654 Application Guide - 3 4" rods are for general purpose use, small diameter drains or flues, and septic tanks. 7 8" rods are for 6" and 8" diameter drains and septic tanks. " and 8" rods are for municipal and other heavy duty use. Should you require different lengths or diameters please contact our sales office who will be able to supply price and availability information.

One piece moulded One piece moulded C/W R/L C/W R/L Clearing Wheel Universal Drop Scraper Lockfast 740 770 4" 74 77 6" 742 772 Double Worm Screw 2" 749 779 4" 759 789 Plunger 4" 75 78 6" 752 782 4" 374 3742 6" 739 898 Guides rods around difficult bends and removes minor blockages by pushing material clear. Glides over small obstructions and drops into vertical scraping position to allow offending material to be dragged back towards the operator. Pierces blockages such as paper or rags and the obstruction is drawn back to clear the pipe. Builds up pressure of water which forces obstruction clear. The plunger complete with rubber and leather washers (C/W R/L) enables the rubber plunger disc to be removed and replaced. ACCESSORIES FOR RODS Cup & Screw 768 799 For use with replacement rubbers and washers. Rotating Handle 2872 793 For use with rod lengths to allow easier rotation of rods. Harpoon 76 79 To pierce and extract bulky material. 2

ACCESSORIES FOR RODS Retrieving Tool Universal Boring Tool 804 794 762 792 Archimedean Screw Lockfast 757 787 To retrieve lost rods or tools; coil locates around joint for extraction. Heavy duty tool for breaking up hard deposits. Heavy duty tool for screwing into soft sand/silt deposits, blockages and extraction. Spear Head 2870 287 To break up drain and chimney deposits. Chisel 2843 2844 To break up heavy materials. Crown Root Cutter 4" - 4476 6" - 4477 For cutting roots. 3

Cleaning Rod Sets - For professional people who require their tools to be at hand on a regular basis there are two purpose designed sets, one in a strong rigid plastic case and another in a heavy duty blue carry bag, both of these are supplied with adjustable shoulder straps. The compact nature of these sets allows them to be easily stored in the works, shed, garage or van. These sets include 30 feet of the finest Bailey Blue Rods with varying tool options. Their quality, reliability and strength ensure that the toughest jobs can be tackled - an essential product for the builder, plumber, chimney sweep or handyman. Cleaning Rod Set in rigid plastic case Universal Lockfast 3602 3603 Contents: Quantity Size 0 3 4" x 3 Bailey Blue Rods - Brass clearing wheel 4" Drop scraper 4" Plunger 2" Double worm screw 6" Brush CLEANING ROD SETS Cleaning Rod Set in blue carry bag Universal Lockfast 543 5503 Contents: Quantity Size 0 3 4" x 3' Bailey Blue Rods 4" Drop scraper 4" Plunger 2" Double worm screw 4

DRAIN ROD MERCHANDISER UNITS Drain Rod Merchandiser Unit - An attractive high visibility display unit which will use the minimum of valuable floor space. Each merchandiser unit contains 0 drain rod sets individually packed into plain polybags, and can be purchased with 2 tool or 4 tool drain sets, fitted with either universal or lockfast joints as required. Also available as a merchandiser unit is the blue carry bag set with 3 tools. 2 Tools Universal Lockfast 468 32 Contents: Quantity Size 0 3 4" x 3' Polypropylene Blue Rods 4" Plunger 2" Double worm screw 2 2" Leather Straps 3 Tools in blue carry bag 4 Tools Universal Universal Lockfast 5483 5504 Contents: Quantity Size Lockfast 469 322 Contents: Quantity Size Packed 0 sets per merchandiser unit. 0 3 4" x 3' Polypropylene Blue Rods 4" Drop scraper 4" Plunger 2" Double worm screw Packed 0 sets per merchandiser unit. 0 3 4" x 3' Polypropylene Blue Rods - Clearing wheel 4" Drop scraper 4" Plunger 2" Double worm screw 2 2" Leather straps Packed 0 sets per merchandiser unit. Rod Sets - These Rod sets are packed into a plain polybag and can also be used as refills for merchandiser units. Rod Sets 5 3 4" dia. Blue Rod with 2 tools and straps 3 4" dia. Blue Rod with 4 tools and straps 7 8" dia. Blue Rod with 4 tools and straps Universal Lockfast 470 323 47 324 838 843 Each set contains 0 x 3' polypropylene Blue Rods.

Drain, Chimney and Flue Cleaning Brushes Drain and Sweep s Brushes, Wooden Stock Universal Lockfast 4" 846 854 6" 847 855 8" 848 856 9" 849 857 0" 850 858 2" 85 859 4" 852 860 6" 853 86 Drain and Sweep s Brushes, Plastic Stock Universal 4" 5682 6" 5683 6" 5689 Drain and sweep s brushes with bristles in wooden stock. Use for brick chimneys and coal burning applications. Drain and sweep s brushes with bristles in plastic stock. Use for brick chimneys and coal burning applications. CLEANING BRUSHES Wire Tube Brushes Universal Lockfast 2" Whit Male 3 4" 862 868 874 2" 863 869 875 3" 36 364 3608 4" 864 870 876 5" 4094 4095 3092 6" 865 87 877 7" 4327 4329 4325 8" 3770 377 3772 9" 866 872 878 0" 362 365 3609 2" 363 366 360 4" 4328 4330 4326 6" 867 873 879 Scrapes and brushes ceramic flue pipes, pre-cast sectional chimneys and brick chimneys. Brass Adaptors Universal Lockfast 0070 0072 2" Whitworth female for use with wire or polypropylene tube brushes. 6

PIPE & FLUE CLEANING RODS & TOOLS Coiled Spring Rods - Use where maximum flexibility is required. More flexible than polypropylene or steel rods - light duty for domestic flues and pipework with U bends or tight corners. Coiled Spring Rod 3 4" x 3' 885 2" x 3' 900 Leading Coiled Spring Rod 3 4" 886 2" 3767 Key Key for 3 4" 887 Key for 2" 3768 To ease the threading of connecting coiled spring rods and uncoupling. 7

Steelflex Rods - This range of rods and tools are manufactured from high tensile carbon steel. Use for heavy duty sewer cleaning applications. Can also be used with motorised tools. Price on application, minimum quantities apply. 8mm ( 5 6") dia. x m long.5m long 2m long 0mm ( 3 8") dia. x m long.5m long 2m long Steelflex Rods 3000 300 3002 3003 3004 3005 Flexible Coiled Spring Leading Rod 3040 Assists with the negotiation of bends. SEWER CLEANING RODS & TOOLS Steelflex Tools Rotating Handle 8mm/0mm 3055 For use with rod lengths to allow easier rotation of rods in either direction. Locking Spanner 8/0mm 303 For coupling rods and accessories together. 8

STEELFLEX ACCESSORIES Suitable for 8/0mm Rods Clearing Wheel 3045 Drop Scraper 4"/00mm 6"/50mm 3038 3039 Double Worm Screw 2"/50mm 4"/00mm 308 309 Rubber Plunger 4"/00mm 6"/50mm 9"/225mm 3035 3036 3037 Crown Root Cutter 4"/00mm 6"/50mm 304 3042 Guides rods around difficult bends and removes minor blockages by pushing material clear. Glides over small obstructions and drops into vertical scraping position to allow offending material to be dragged back towards the operator. Pierces blockages such as paper or rags and the obstruction is drawn back to clear the pipe. Builds up pressure of water which forces obstruction clear. For cutting roots. Wire Tube Brush 4"/00mm 6"/50mm 9"/225mm 2"/300mm 3034 3049 3050 305 Scrapes and brushes ceramic flue pipes, pre-cast sectional chimneys and brick chimneys. Spear Head 3028 To break up drain and chimney deposits. Chisel 3030 To break up heavy materials. Boring Tool 3032 Heavy duty tool for breaking up hard deposits. 9 Retrieving Tool 8mm/0mm 328 To retrieve lost rods and tools; coil locates around joint for extraction.

Drain Testing Plugs and Equipment - Bailey Products are a leading manufacturer of drain testing plugs and equipment in the world. Our experience and knowledge in this specialist area is unrivalled and the quality of our products is recognised as being of the highest standard. We supply the leading national authorities and many other concerns, as well as offering a made to measure service for customers with special needs. Our helpful staff will freely advise any customer about our products and supply an economical answer to their problems. 2 types of drain test plug (centre locking and rim fastening) are manufactured by Bailey s and they are both comprehensively detailed in this section of the catalogue. Centre Locking Water and Air Testing of Drains and Sewers - Testing of drains and sewers is governed by the requirements of BS830: 985, the Code of Practice for Building Drainage and BS8005: 987, the British Standard for Sewerage. Similar requirements are also stated in Water Authorities Association publications. Additionally these test plugs enable compliance for testing of drains and sewers in accordance with European Standard EN 60: 997. GENERAL PROCEDURE FOR AIR AND WATER TESTS - The following procedure should be adopted prior to testing.. Inspect the pipeline for possible damage sustained during or subsequent to laying. 2. Clear the pipeline of any debris and flush out. Rim Fastening DRAIN TEST PLUGS & EQUIPMENT 3. Check that all pipe joints have been correctly made. 4. If any cement mortar joints have been used, leave for at least 24 hours before testing to allow the mortar to set and reach adequate strength. 5. Thoroughly check all plugs and equipment. Make sure that any rubber tubing used in connections is in good condition and not perished. 6. Fit expanding plugs into the ends of the pipeline and all branches. Make sure that the surface of the pipes where plugs fit is also clean and free from any extraneous material such as grit. N.B. Concrete pipes may require the installation point areas cleaned of any irregular surfaces to ensure a good seal. If necessary, due to some concrete surfaces being porous, the area should be painted to create a good seal. inch (25.4mm) head of water gauge is equivalent to 0.036Ib. per square inch. ft. head of water is equivalent to 0.432Ib. per square inch. Ib. per square inch is equivalent to 2.3ft head of water. bar is equivalent to 4.7Ib. per square inch. bar is equivalent to 33.35ft. head of water. 0

AIR TEST Air Test - Testing Procedure. Seal pipe section with appropriate size drain test plug. 2. Fit test nipple to one of the drain test plugs. 3. Connect rubber hose via Y piece to nipple, U gauge and hand bellows. 4. Fill U gauge with water to zero. 5. Squeeze the hand bellows gently until the level reaches 00mm on the open side of the gauge and the lower limit below zero on the closed side. The level should not fall to less than 75mm during a period of 5 minutes without further pumping, after allowing a suitable time for stabilization of air temperature. If it drops below 75mm within the specified time the pipe section is leaking. Fill water here WATER TEST Plug Sewer/Drain pipe Branch pipe Plug Stand pipe Water Test - Testing Procedure. Fit an expanding plug, suitably strutted to resist the full hydrostatic head, at the lower end of the pipeline. Also plug any branches. The pipes may need strutting to prevent movement. 2. Provide a means of applying the test head of water at the top end of the line, preferably using a 90 bend and a straight pipe of the same diameter as the line. Ensure that the standpipe and plug are suitably strutted to resist the applied hydrostatic head. Provide a means of filling the pipeline with water. 3. Fill the system with water keeping pockets of trapped air to a minimum. 4. Fill the standpipe to the requisite level. 5. Leave for at least two hours to enable the pipes to become saturated, topping up as necessary. 6. After the absorption period measure the loss of water from the system by noting the amount needed to maintain the level in the standpipe over a further period of 30 minutes. In carrying out the test to the requirements of BS8005, the standpipe should be topped up at regular intervals of 5 minutes and the amounts measured.

Centre Locking Drain Test Plugs Operating Instructions -. Select the correct size of plug, to suit the internal diameter of the pipe. 2. Remove any grease or foreign material from installation point. 3. Ensure no dirt is trapped between seal of plug and plates. 4. Ensure plug is inserted square to pipe wall. 5. Ensure wing nut and sealing cap are tight. Brass Wing Nut Nominal Pipe Size Metric/mm Nominal Pipe Size Imperial BSP Outlet Size Brass Cap P/N. Steel Plates complete with Plastic Cap P/N. Brass Cap P/N. Aluminium Plates complete with Plastic Cap P/N. Min/Max Operating Range in mm 2.5 2" Solid 979 - - - 2.5-8 20 3 4" Solid 2555 - - - 8.5-24 25 " Solid 2556 - - - 22-27 30 4" Solid 978 - - - 26-32 40 2" 2" 2558 964 5508 5535 36-48 50 2" 2" 2559 962 5509 5536 49-60 65 2 2" 2" 2560 965 550 5537 6-75 75 3" 2" 256 963 55 5538 73-85 90 3 2" 2" 2562 966 552 5539 85-95 00 4" 2" 246 960 553 5540 94-0 5 4 2" 2" 467 977 554 554 0-20 25 5" 2" 2563 975 555 5542 2-38 40 5 2" 2" 53 530 - - 38-48 50 6" 2" 247 96 556 5543 46-63 00 4" " - - 557-94-0 25 5" " - - 558-2-38 50 6" " - - 559-46-63 DRAIN TEST PLUGS Steel Wing Nut Nominal Pipe Size Metric/mm Nominal Pipe Size Imperial BSP Outlet Size Steel Plates complete with Brass Cap P/N. Aluminium Plates complete with Brass Cap P/N. Min/Max Operating Range in mm 75 7" " 2564 5520 70-95 200 8" " 2565 552 9-2 225 9" " 2420 5522 26-235 250 0" " 2566 5523 244-260 275 " " 976 5524 275-305 300 2" " 2567 5525 296-34 325 3" " 2568-35-350 350 4" " 2569 5526 340-375 375 5" " 2570 5527 365-400 400 6" " 257 5528 390-425 425 7" " 2572-45-440 450 8" " 393 5529 440-475 500 20" 2" - 3720 495-525 525 2" 2" - 372 520-555 550 22" 2" - 5530 534-569 600 24" 2" - 3722 590-630 650 26" 2" - 553 640-675 675 27" 2" - 3723 660-690 700 28" 2" - 3724 680-705 750 30" 2" - 3726 735-760 800 32" 2" - 5532 790-825 825 33" 2" - 5533 84-845 900 36" 2" - 5534 890-925 Nylon Centre Locking Drain Test Plugs, White, with plastic wing nuts and cap Nominal Pipe Size Metric/mm Nominal Pipe Size Imperial BSP Outlet Size P/N. Min/Max Operating Range in mm 2.7 2" Solid 5702 3-7 9 3 4" Solid 5703 20-26 25.4 " Solid 5704 25-32 32 4" Solid 5705 34-43 38 2" Solid 5706 38-45 38 2" 2" 5490 38-45 50 2" 2" 549 50-62 65 2 2" 2" 5492 62-70 75 3" 2" 5493 74-87 00 4" 2" 5494 97-07 25 5" 2" 5495 24-37 50 6" 2" 5496 49-65 2

DRAIN TEST PLUGS Double Seal Drain Test Plugs - Useful for correct alignment, uneven wall surface and also provides longer duration of seal. Steel Plates with Brass Wing Nut Nominal Pipe Size Metric/mm Nominal Pipe Size Imperial Steel Plates with Steel Wing Nut Nominal Pipe Size Metric/mm Nominal Pipe Size Imperial BSP Outlet Size BSP Outlet Size Complete with Brass Cap P/N. Complete with Brass Cap P/N. Min/Max Operating Range in mm 40 2" 2" 2880 36-48 50 2" 2" 2582 49-60 65 2 2" 2" 288 6-75 75 3" 2" 2583 73-85 90 3 2" 2" 2882 84-95 00 4" 2" 2584 94-0 5 4 2" 2" 3649 08-20 25 5" 2" 2585 2-38 40 5 2" 2" 532 38-48 50 6" 2" 2586 46-63 Min/Max Operating Range in mm 75 7" " 2587 70-95 200 8" " 2588 9-2 225 9" " 2589 26-235 250 0" " 2590 244-260 275 " " 2934 275-305 300 2" " 259 296-34 350 4" " 2592 340-375 375 5" " 2593 365-400 400 6" " 2594 390-425 Operating Pressures The information below is a guide to the maximum back pressure for the different types and sizes of test plugs:- 3 Sizes 2"(2.5mm) to (30mm) 30PSI Sizes 2"(40mm) to (300mm) 7PSI Sizes 3"(325mm) to (200mm) 5PSI Sizes Over 40"(200mm) 3PSI These pressures will vary upon cleanliness and condition of pipe bore and ambient temperature.

Twin Port Rim Fastening Drain Test Plugs - Rim fastening plugs expansion guidelines only Steel The twin port rim fastening steel plugs are available in the same sizes as the standard rim fastening plugs. The second port is normally fitted with a 4" (00mm) plain bore and supplied complete with a 4" (00mm) steel drain test plug. The second port is normally offset to the outer edge of the test plug. This allows the water to be easily drained from the pipeline after testing, without having to remove the test plug. Alternative ports are available to order. DRAIN TEST PLUGS Rim Fastening Drain Test Plugs - Operating Instructions. Select the correct size of plug, to suit the internal diameter of the pipe. 2. Remove any grease or foreign material from installation point. 3. Ensure plug is inserted square to pipe wall. 4. Tighten rim nuts progressively in diametrically opposite order. They must be tightened equally. Over-tightening of nuts may result in distortion of the clamp ring. 5. Ensure sealing cap is tight. If the plug has a second outlet ensure that this is also tightly sealed. 6. FOR SAFETY: These plugs must be supported by an engineered brace to withstand the calculated back pressure. They must NOT be used without such a brace. Rim fastening steel plugs, especially the larger sizes, have the advantage over centre locking plugs, as the peripheral nuts enable plates to be closed together evenly with ease. Please ensure that you quote either metric or imperial sizes with part number when ordering. The metric size is not compatible with the imperial size. Rim fastening plugs can be made to sizes up to 2400mm and other special sizes. Further details on application. Nominal Pipe Size Metric/mm P/N. Min/Max Operating Range in mm Nominal Pipe Size Imperial P/N. 432 445 49-445 7" 445 450 90 437-463 8" 927 475 902 462-488 9" 928 500 903 487-53 20" 929 525 904 52-538 2" 930 600 905 587-63 22" 93 675 906 662-688 23" 932 700 907 687-73 24" 933 750 908 737-763 26" 934 800 909 787-83 27" 935 825 90 82-838 28" 936 850 9 837-863 30" 937 900 92 887-93 3" 938 950 93 937-963 32" 939 975 94 962-988 33" 940 000 95 987-03 34" 94 050 96 037-063 36" 942 25 97 2-38 38" 943 50 98 37-63 39" 944 200 99 87-23 40" 945 250 920 237-263 42" 946 - - - 47" 558 - - - 48" 947 Min/Max Operating Range in inches 6.5"-7.5" 7.5"-8.5" 8.5"-9.5" 9.5"-20.5" 20.5"-2.5" 2.5"-22.5" 22.5"-23.5" 23.5"-24.5" 25.5"-26.5" 26.5"-27.5" 27.5"-28.5" 29.5"-30.5" 30.5"-3.5" 3.5"-32.5" 32.5"-33.5" 33.5"-34.5" 35.5"-36.5" 37.5"-38.5" 38.5"-39.5" 39.5"-40.5" 4.5"-42.5" 46.5"-47.5" 47.5"-48.5" 4 Both the Metric and Imperial sizes are with 2" BSP outlet size.

DRAIN TESTING EQUIPMENT Drain Test Kit - The Bailey Drain Test Kit has been produced to supply the industry with an Off the Shelf solution for the completion of air tests up to 4" water gauge. Hand Bellows Air Gauges 4" U air gauges 2" U air gauges Air Testing Procedure. Seal pipe section with appropriate size drain test plug. 2. Fit test nipple to one of the drain test plugs. 3. Connect rubber hose via Y piece to nipple, U gauge and hand bellows. 4. Fill U gauge with water up to the zero level. 5. Squeeze the hand bellows gently until the level reaches 00mm on the open side of the gauge and the lower limit below zero on the closed side. The level should not fall to less than 75mm during a period of 5 minutes without further pumping, after allowing a suitable time for stabilization of air temperature. If it drops below 75mm within the specified time the pipe section is leaking. 4074 985 986 987 All the necessary components, in conjunction with the appropriate size of drain test plugs (separately supplied), consisting of a 4" U Gauge, 9 length of tubing, hand bellows, Y piece, 2" and " test nipple cap. U Gauge Tubing 988 (Standard coil length 50 metres) Y Pieces 989 Test Nipple Caps 2" test nipple caps " test nipple caps 2" test nipple caps Brass 995 996 997 Plastic 6055 6056 Plug Caps 5 2" brass plug caps " brass plug caps 2" brass plug caps 880 882 884

Drain Testing Equipment Canvas Air Bag - With 4' 6" rubber tubing With 4" Brass Tap With Schrader valve 2"/50mm 720 5954 3"/75mm 967 93 4"/00mm 968 94 5"/25mm 72 5955 6"/50mm 969 95 8"/200mm 3636 96 9"/225mm 970 4847 0"/250mm 723 97 2"/300mm 724 98 5"/375mm 726 5956 6"/400mm 5393 5957 8"/450mm 4598 5958 24"/600mm 537 5959 30"/750mm 5574 5960 36"/900mm 5053 596 Inflatable rubber bladder with canvas protective cases which can be used during maintenance and similar applications. Canvas Air Bags Recommended Inflation Pressures 2" - 5" dia. - 0 p.s.i. 6" - 8" dia. - 6 p.s.i. 9" - 0" dia. - 4 p.s.i. 2" - 6" dia. - 3 p.s.i. 8" dia. and over - 2 p.s.i. Other sizes available on request. Brass Tap Schrader Valve DRAIN TESTING EQUIPMENT Inflatable PVC Plugs Nominal Size For sealing pipes with actual internal diameters in the range Max. Inflation P.S.I. With Schrader valve 2"/50mm 2"/50mm but under 3"/75mm 25 5507 3"/75mm 3"/75mm but under 4"/00mm 20 5646 4"/00mm 4"/00mm but under 6"/50mm 5 587 6"/50mm 6"/50mm but under 8"/200mm 8 588 8"-2"/ 200-300mm 8"/200mm but under 2.5"/35mm 7 5647 These plugs are similar in use to the canvas or nylon covered bags. They have the additional advantages of being more robust, easy to keep clean, seal across a wider tolerance band and will achieve a good seal in all types of pipe very easily and quickly. Inflator Pumps 993 Brass pump to suit 4" brass or plastic tap. Inflator Pumps 5852 Plastic pump to suit Schrader valve. 6

DRAIN TESTING EQUIPMENT Drain Testing Equipment Drain Testing Dyes, 200g Jars Fluoresceine Green Red Blue Purple Yellow Orange Smoke Testers Small Large 570 20-25,000 3589 5-20,000 3590 2-5,000 992 2-4,000 3592 2-4,000 359 0-2,000 5502 0-2,000 The dyes are soluble in water and are used to locate the direction of water flow in pipes, drains etc. The best way to use the dye is to dissolve the required amount into about five litres of water and then add into the flow or tank. The dilution rates assume that the dye is being added to clean water, dirty water will require a greater concentration. 990 99 Dilution Rates Litres Suitable for boiler testing and for above and below ground drain and pipe testing for defects and leaks. Gives off a brown smoke when ignited. Smoke Pellets Small - 6 per tube 3745 For testing flues chimneys and fans. Gives off a white smoke when ignited. 7

Sewer Tools - Gully Grabs Gully Grabs 3 2" Round gully grab 4459 with.5m handle 5 4" Round gully grab 4950 with.5m handle 6" Square gully grab 550 with.5m handle 8" Round gully grab 5377 with.5m handle Manufactured in steel these are all easy and effective tools for clearing gullies and silt traps. SEWER TOOLS - GULLY GRABS < Longer 2.5m handles are also available. 8

PLUMBER S HAND TOOLS Plumber s Hand Tools Force Cups Cup dia. Overall Length Medium 4" 2" 98 Large 5" 8" 982 A popular tool which creates a high pressure to clear drain stoppages in sinks, basins and shower/ bath wastes. Pipe & Sink Cleaners 4" x 3' 06 4" x 6' 07 4" x 9' 08 4" x 2' 09 Manufactured from galvanised steel wire. Hold gripping handle to clear sink, bath and shower wastes. 9

DUCT RODS FOR CABLE LAYING Bailey s rods, produced to British Telecom specification, are made from PVC in lengths up to 3 metres, fitted with brass joints. The joints can be either Ferret type as supplied to British Telecom. In addition a 250 metre PVC coil is available. TYPE OF JOINT Ferret joints operate on the principle of a spring loaded pin engaging into a mating hole when the joints are screwed together. The trigger, which is flush with the body of the joint, is pressed for quick release. This ensures total security of the joint. This type of joint is favoured as there are no sharp edges to damage existing cable in the duct, or the duct itself. Ferret joints are made in two sizes (for 5 6" and 2" diameter rods). To couple the different sizes together an adaptor is used. COLOUR Rods are supplied in yellow. GLASS FIBRE RODS We offer 0mm diameter white solid glass fibre rods. These are more rigid than the 2" PVC rods. They are fitted with non-locking joints which will not couple with any other type of joint. These rods must be rotated clockwise in use to help prevent them becoming unscrewed. 5 6" dia. Ferret PVC Rod, 3 metre, yellow 5 6" dia. Ferret PVC Rod, 2 metre, yellow 2" dia. Ferret PVC Rod, 2 metre, yellow 0 mm dia. Glass Fibre Rod, metre, white Duct Rod No. 3 Coupling Rods Duct No. 3 female Coupling Rods Duct No. 3 male swivel Coupling Rods Duct No. 3 male Duct No. 3 reel Ferret PVC Rod B.T. title Rod Duct No. Glass Fibre Rod Coiled PVC Rod USE OF ABOVE: 229 and 230 can be used to join together two lengths of Rod Duct No.3 where one of the lengths can be easily rotated. The male and female threads can then be screwed together in the normal manner. 229 and 23 can be used to join together two lengths of Rod Duct No.3 where, due to the length of the pieces to be joined, neither length can be rotated. In this case the swivelling nut is rotated to join the threads together. 230 or 23 can be used to attach 2937 (Leader and Follower, Steel) to Rod Duct No.3. B.T. item Code No. No. 26254 700 No.2 26277 702 No.5 26436 704 No.6A 26537 70 No.3 26330 500 This is a 250 metre long coil of 5 6" diameter black PVC rod, with no joints fitted. This item is usually supplied on its own to fit a motorised swift in large vans. Where a motorised swift is not available, a hand operated swift mounted on a frame can be supplied. A range of plated steel joints, shown below, are available separately. Coupling for Duct Rod No.3 Bailey - 26394 229-26395 23-26393 230-26454 2260 < 2260 < 230 < 23 < 229 DUCT RODING EQUIPMENT AND ACCESSORIES FOR CABLE LAYING 20

DUCT RODING EQUIPMENT AND ACCESSORIES FOR CABLE LAYING 2 COUPLING-UP PIECES (Marrying Sets) Coupling-up pieces are used for joining rods together in the duct. When pushed together (from each end of the duct) the two halves of the coupling-up pieces join together and lock. The pieces can be separated by unscrewing. Coupling-up pieces are available with Lockfast female threads at each end, as listed below. Coupling-Up Piece No. Lockfast Coupling-Up Piece No.2 Lockfast Leaders and Followers Leaders provide a smooth bullet shaped joint on the leading end of the rod to guide the rod through the duct, especially where cables already exist in the duct. Followers allow a cord to be attached to the trailing end of a rod prior to pulling through a cable. 2" Ferret Male Leader and Follower 2" Ferret Female Leader and Follower 26479 26480 Coupling-Up Pieces B.T. title Coupling- Up Piece No. Ferret Leader and Follower 2" Leader and Follower Steel Leader and Follower 2" with Spring Attachment Rod 3A 26973 3276 Leader or follower to 2" Ferret rod complete with 6" long spring. Bellmouth Split Size Weight (GRAMS) B.T. item Code No. Attachment Rod A 26479 2220 Attachment Rod 2A 26480 229 Attachment Rod combined 26382 2937 Leader and Follower Bellmouth Split No. 0500 4545 Bellmouth Split No. 2 050 4546 Bellmouth Split No. A 2654 4547 Bailey No. Small, 3 8" (35mm) dia. 930 2857 2087 No.2 Medium, 7 8" (48mm) dia. 600 2858 2088 Solid one piece fittings. Solid one piece fitting, will function as either leader or follower on Rod Duct No. 3. 0500 2654 050

Adaptors - A range of adaptors is manufactured: (a) to enable connection to be made between different types of joint. (b) to enable connection to be made between two male or two female ends of the same type of joint. (c) The term Ferret refers to the Ferret joint fitted to 5 6" dia. Ferret Rods. (d) The term 2" Ferret refers to the 2" dia. Ferret Rods. (e) More than one adaptor may be needed to achieve a desired connection. Adaptor No. 2224 Adaptor No. 2268 Adaptor No. 2225 Adaptor No. 2288 Adaptor No. 0036 No.A 26484 2224 No.2A 26540 2268 No.3A 26485 2225 No.5 26296 2288 No.7 0002 0036 To join Ferret female to Rod Duct No.3 male. To join Ferret male to Rod Duct No.3 female. To join Ferret female to Rod Duct No.3 female. To join Lockfast female to Ferret female. This adaptor incorporates a 6" long spring to give flexibility to the connection. To join Ferret male to 2" dia. Ferret female. Measuring Poles - To determine the height of overhead telegraph or power cables to enable the correct distance between these two cables to be set. Rod Clearance Set Complete B.T. item Code No. Bailey 62 2669 Telescopic Clearance Set 008874 4947 Comprising: 7 x metre connecting glass fibre rods with Vee attachment for top rod, plus a 2 metre surveyor s rod, complete with carrying case. Rod clearance set telescopic, 6.5 metre length fully extended. Each set is calibrated. Hollow Pole Riggers - This device is used for threading cable up the inside of hollow telegraph poles. It is used by screwing the head on to Rod Duct No.2 and pushing it up the inside of the telegraph pole. A weight attached to a length of rope drops down the outside of the pole, leaving the pole threaded by rope. Cable can then be drawn up the inside of the pole. The rope and weight are not supplied with the Rigging Head A. DUCT RODING EQUIPMENT AND ACCESSORIES FOR CABLE LAYING Rigging Head A 26687 2573 22

DUCT AND CONDUIT CONTINUOUS RODS DUCT AND CONDUIT CONTINUOUS RODS - A comprehensive range of Ducts and Conduit Rods supplied on a reel complete with support frame. They are available in five diameters with lengths from 30m to 300m to suit the varying applications. These are manufactured with a fibreglass core which offers exceptional high tensile strength. The flexibility is provided by radially wrapping with reinforced fibres and then covering with a protective and wear resistant polypropylene outer covering. The reel and frame is manufactured in sturdy tubular steel which is plated for maximum protection. The frames for the 4.5mm and 6.7mm rods are free standing, the frames for the 9mm, mm and 4mm are fitted with two wheels for easy transportation. Reels and Frame Dimensions H520mm x W400mm x D62mm Size Rod - reel, frame and fittings Rod only with fittings 4.5mm x 30m 5980 4.5 6003 4.5mm x 50m 598 4.8 6004 4.5mm x 60m 5982 5.0 6005 4.5mm x 70m 5983 5.3 6006 4.5mm x 80m 5984 5.5 6007 The leading end of the rods are fitted with a male brass coupling, onto this an aluminium rod end tip is fitted which guides the rod through the duct and allows pulling rope to be attached. The other end of the rod is fitted with a female brass coupling for rod extension if required. Weight Kgs H730mm x W600mm x D20mm 6.0mm x 60m 5985 9.0 6008 6.0mm x 80m 5986 0.0 6009 6.0mm x 00m 5987.0 600 6.0mm x 50m 5988 3.0 60 H940mm x W850mm x D520mm 9mm x 60m 5989 29.0 602 9mm x 80m 5990 3.0 603 9mm x 00m 599 33.0 604 9mm x 20m 5992 35.0 605 9mm x 50m 5993 38.0 606 H30mm x W0mm x D520mm mm x 00m 5994 42.0 607 mm x 50m 5995 48.0 608 mm x 200m 5996 55.0 609 mm x 250m 5997 62.0 6020 mm x 300m 5998 69.0 602 H300mm x W300mm x D550mm 23 4mm x 50m 5999 70.2 6022 4mm x 200m 6000 84.5 6023 4mm x 250m 600 98.8 6024 4mm x 300m 6002 3. 6025

Threaded Rod End Fittings Brass Male Rod End Fittings M5 for 4.5mm rods 6026 M6 for 6.7mm rods 6027 M2 for 9mm rods 6028 M2 for mm rods 6029 M2 for 4mm rods 6030 Brass Female Rod End Fittings M5 for 4.5mm rods 603 M6 for 6.7mm rods 6032 M2 for 9mm rods 6033 M2 for mm rods 6034 M2 for 4mm rods 6035 Tapered Rod End M5 for 4.5mm rods 6036 M6 for 6.7mm rods 6037 M2 for 9mm, 6038 mm,4mm rods Jointed Ferrule, Brass 4.5mm rods 6039 6.7mm rods 6040 9mm rods 604 mm rods 6042 4mm rods 6043 Brass male rod end fittings are fitted as standard to the leading end of the rods. Other rod accessories can easily be fitted to these. Brass female rod end fittings are fitted as standard to the end of the rods. Extension rods can be fitted to this. Aluminium female rod end tips are fitted as standard with the rods. This will guide the rod along the duct and allows pulling rope to be attached through the eye. To repair rod breakages, the ferrule is adhered to the rod with a proprietory two part adhesive. THREADED ROD END ACCESSORIES Swivel Connector M2 for 9mm, 6044 mm, 4mm rods Used to connect two duct rods together when the required length exceeds a single rod length. Reel and Frame only For 4.5mm, rods 6045 For 6.7mm, rods 6046 For 9mm, rods 6047 For mm, rods 6048 For 4mm, rods 6049 Repair Kit For 4.5mm, rods 6050 For 6.7mm, rods 605 For 9mm, rods 6052 For mm, rods 6053 For 4mm, rods 6054 Included in this kit is the brass jointing ferrule, adhesive and an instruction leaflet. 24

Liverpool Street Digbeth Birmingham B9 4DS Tel: 02 380 8000 Fax: 02 380 8020 Email: sales@bailey-products.com Website: www.bailey-products.com ISO 900: 2008 A Marmon Group/Berkshire Hathaway Company Whilst every effort has been made to ensure the accuracy of all information contained in this catalogue, the company will not accept responsibility for any claims arising from errors or omissions. In the interests of technical improvement and/or customer service, the company reserves the right to introduce modification to any of the products illustrated or described in the catalogue. Bailey Products also produce hot brass stampings, metal pressings, machined components and plastic extrusions. Bailey products are protected by British and International patents, patent applications, design registrations and copyright. Bailey Products reserves the right to alter specifications and/or prices without prior notice. All goods supplied by Bailey Products are supplied subject to Conditions of Sale, copies of which are available on request. September 200