Shellfire L2TP-IPSec Setup Windows XP

Transcription

1 Shellfire L2TP-IPSec Setup Windows XP This guide explains how to configure your Windows XP PC to work with a Shellfire L2TP-IPSec VPN. Index 1. Required data and files Creating a connection Importing certificates Creating a new connection Connecting / disconnecting Checking your connection status... 12

2 1. Required data and files Setting up a L2TP-IPSec connection to your Shellfire VPN on Windows XP works as follows. You need the following data from your VPN details that can be found in your Shellfire QuickAccess customer center: - server address - username - password The server address is the address of the Shellfire Server used for connection. Username and password are required for authentication with the PPTP server. Navigation note: How to find your VPN details Log in to using your customer id or your address and your password - Open the QuickAccess customer center bar - Click on your VPN id - Your VPN details show up with the required data Warning: Username and password for your PPTP connection are not the same as the ones for your Shellfire website account! Warning: In case your VPN is not currently set to PPTP, you have to change the VPN type to PPTP from your customer center, first.

3 2. Creating a connection Connecting to a L2TP-IPSec VPN with Windows XP does not require any additional software other than Service Pack 3 (SP3) to be installed. You only need a working internet connection. Follow these steps: 1.1. Importing certificates First, you have to import the certificates from the download package into your system. The certificates required for Windows XP are packaged in the.p12 file that you can find inside the download package. Unzip the package to any folder on your hard drive and execute the file "ImportCertificates.bat" as an administrator (right click -> execute as administrator), to import the certificates. Warning: A simple double click on the unzipped.p12 file, opening the Windows import wizard does not work for this purpose, as the wizard can only import the certificates to the "current user" storage. A certificate for a working L2TP-IPSec connection MUST be imported into the "local machine" storage which can only be achieved by using the supplied.bat file or using a manual importing method. Manual import (only required in case you do not want to use the import tool): Alternatively, you can use Microsoft's management console to import.p12 certificates (Start -> Run -> mmc.exe). You have to make sure that you are importing the certificates to the "local machine" storage. To achieve this, add a new snap-in (File -> add / remove snap-in) -> certificates -> add -> certificates (Computer account). In the tree on the left, you can now right-click the certificate folder -> all tasks -> "import...", select the previously unzipped.p12 file and follow the instructions Creating a new connection Proceed as follows to add the L2TP-IPSec connection to your Windows network connections. 1) Start -> Control panel

4 2) Network and Internet Connections 3) Create a connection to the network at your workplace

5 4) The New Connection Wizard opens up. Choose "Virtual Private Network connection" and click "Next" 5) Choose a name for the connection and click "Next".

6 6) Choose "Do not dial initial connection", click "Next" 7) Enter the server address from the VPN details on the Shellfire website, "Next"

7 8) If you like, you can set up a shortcut on your desktop. Just activate that option and click "Finish". 9) a. If you created a shortcut on your desktop, you can just double-click it now. b. If you did create a shortcut, click on the window "Network and Internet connections" and choose "My Network Places".

8 Next, click on "View Network Connections" on the left of the screen Open the connection window to your VPN via double-click. 10) In the connection window, enter your username and password. You can activate or deactivate the "save password" feature as you wish to do. Then, click "Properties". 11) Go to the tab "Network" and set the VPN type to "L2TP-IPSec VPN".

9 12) Click "OK" your connection is now ready for use. 13) To make a connection, click on "Connect".

10 3. Connecting / disconnecting After rebooting your Computer or after being disconnected from the internet, the VPN connection usually disconnects and has to be reconnected. To connect, follow these steps: 1) If you have created a desktop shortcut, just double-click it. 2) If you did create a shortcut a. click on the window "Network and Internet connections" and choose "My Network Places" b. Next, click on "View Network Connections" on the left of the screen

11 c. Open the connection window to your VPN via double-click. 3) If required, enter your username and password, click "Connect".

12 4. Checking your connection status If the VPN connection to the Shellfire server has been set up correctly, your IP address on the web is replaced by the IP address of the VPN server. You can check this by following these steps: 1) Make sure the VPN connection is disconnected (step 4) 2) Visit and note your IP address. 3) Now, connect to the VPN server (step 4) 4) Reload the page and check your new IP address. In this example, the first IP address is and the second IP address is As both IPs are different from each other, you can tell that your connection is working nicely. If you get the same IP addresses with and without VPN, check your settings or contact our support.