Cisco SPA901 1-Line IP Phone Cisco Small Business IP Phone

Size: px

Start display at page:

Download "Cisco SPA901 1-Line IP Phone Cisco Small Business IP Phone"

Maurice Garrett
10 years ago
Views:

1 Cisco SPA901 1-Line IP Phone Cisco Small Business IP Phone Durable, Affordable, Feature-Rich IP Telephone for the Home Office and Business Small, affordable, single line business class IP Phone Connect directly to an Internet telephone service provider or connect to an IP PBX Wall mount of table top phone Easy installation with secure remote provisioning. Comprehensive Interoperability and SIP-Based Feature Set Based on the Session Initiation Protocol (SIP), the Cisco SPA901 1-Line IP Phone (Figure 1) has been tested to ensure comprehensive interoperability with equipment from voice over IP (VoIP) infrastructure leaders, enabling service providers to quickly roll out competitive, feature-rich services to their customers. With hundreds of features and configurable service parameters, the Cisco SPA901 addresses the requirements of traditional business users while building on the advantages of IP telephony. Features such as easy station moves and shared line appearances (across local and geographically dispersed locations) are just some of the many advantages of the SPA901. Carrier-Grade Security, Provisioning, and Management The Cisco SPA901 uses standard encryption protocols to perform secure remote provisioning and unobtrusive in-service software upgrades. Secure remote provisioning tools include detailed performance measurement and troubleshooting features, enabling network providers to deliver high-quality support to their subscribers. Remote provisioning also saves service providers the time and expense of managing, preloading, and reconfiguring customer premises equipment Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 6

Comprehensive Interoperability and SIP-Based Feature Set Based on the Session Initiation Protocol (SIP), the Cisco SPA901 1-Line IP Phone (Figure 1) has been tested to ensure comprehensive

2 Figure 1. Cisco SPA901 1-Line IP Phone Telephony Features One line registration Two call appearances accessed via flash key or hook flash Shared line appearance** Line status indicator Call hold Music on hold** Call waiting Outbound caller ID blocking Call transfer: attended and blind Three-way conferencing with local mixing Multi party call conferencing via external conference bridge** Call pickup: selective and group** Call park and unpark** Call back on busy Call blocking: anonymous and selective Call forwarding: unconditional, no answer, on busy Call return: redial last caller Hot line and warm line automatic calling Call logs (60 entries each): made, answered, and missed calls, accessed via HTTP server Redial last called number Do not disturb (callers hear line busy tone) Block anonymous incoming calls Uniform Resource Identifier (URI) (IP) dialing support (vanity numbers) Built-in web server for administration and configuration, with user and administrator access levels 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 6

hold** Call waiting Outbound caller ID blocking Call transfer: attended and blind Three-way conferencing with local mixing Multi party call conferencing via external conference bridge** Call pickup:

3 Built-in interactive voice response system to check status and change configuration Date and time with intelligent daylight savings support Call start time stored in call logs Distinctive ringing 10 user-downloadable ring tones Speed dial (eight entries) Group paging (outbound only)** Intercom (outbound only)** Set preferred codec per call, all calls Configurable dial/numbering plan support Ringer and handset volume controls Handset input gain adjustment DNS SRV and multiple A records for proxy lookup and proxy redundancy Syslog, debug, report generation, and event logging Secure call encrypted voice communication support Network Address Translation (NAT) Traversal Automated provisioning, multiple methods; up to 256-bit encryption: (HTTP, HTTPS, Trivial File Transfer Protocol [TFTP]) Support for Linksys voice system automatic configuration Option to require administrator password to reset unit to factory defaults ** Feature requires support by call server. Hardware Features Voic message waiting indicator light Redial button Dedicated flash button Volume control button cycles through volume levels; controls ringer and handset volume Standard 12-button dialing pad High-quality handset and cradle Ethernet LAN: 10BASE-T RJ-45 5 VDC universal ( V) switching power adapter 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 3 of 6

Ringer and handset volume controls Handset input gain adjustment DNS SRV and multiple A records for proxy lookup and proxy redundancy Syslog, debug, report generation, and event logging Secure call

4 Specifications Table 1 gives specifications for the Cisco SPA901 1-Line IP Phone. Table 2 compares the SPA901 with other Cisco Small Business IP Phones. Table 1. Specifications for the Cisco SPA901 1-Line IP Phone Note: Many features are programmable within a defined range or list of options. Please see the SPA Administration Guide for details. The target configuration profile is uploaded to the SPA901 at the time of provisioning. Data networking MAC address (IEEE 802.3) IPv4 (RFC 791) ARP: Address Resolution Protocol DNS A record (RFC 1706), SRV record (RFC 2782) DHCP client: Dynamic Host Configuration Protocol (RFC 2131) ICMP: Internet Control Message Protocol (RFC 792) TCP (RFC 793) UDP: User Datagram Protocol (RFC 768) RTP: Real Time Protocol (RFC 1889, 1890) RTCP: Real Time Control Protocol (RFC 1889) DiffServ: Differentiated Services (RFC 2475) ToS: type of service (RFC 791, 1349) VLAN tagging 802.1p/Q; Layer 2 quality of service (QoS) SNTP: Simple Network Time Protocol (RFC 2030) Voice gateway SIP v2: (RFC 3261, 3262, 3263, 3264) SIP proxy redundancy: dynamic via DNS SRV, A records Reregistration with primary SIP proxy server SIP support in NAT networks (including serial tunnel [STUN]) SIPFrag (RFC 3420) Secure (encrypted) calling via prestandard implementation of Secure RTP Codec name assignment Voice algorithms: G.711 (A-law and mu-law) G.726 (16/24/32/40 kbps) G.729 A G (6.3 kbps, 5.3 kbps) Dynamic payload support Adjustable audio frames per packet DTMF: in-band and out-of-band (RFC 2833) (SIP INFO) Flexible dial plan support with interdigit timers IP address/uri dialing support Call progress tone generation Jitter buffer: adaptive Frame loss concealment VAD: voice activity detection with silence suppression Attenuation/gain adjustments MWI: message waiting indicator tones VMWI: visual message waiting indicator via NOTIFY, SUBSCRIBE Third-party call control (RFC 3725) Security Password-protected system, preset to factory default Password-protected access to administrator and user-level features HTTPS with factory-installed client certificate HTTP digest: encrypted authentication via MD5 (RFC 1321) Up to 256-bit Advanced Encryption Standard (AES) encryption 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 4 of 6

3) IPv4 (RFC 791) ARP: Address Resolution Protocol DNS A record (RFC 1706), SRV record (RFC 2782) DHCP client: Dynamic Host Configuration Protocol (RFC 2131) ICMP: Internet Control Message Protocol

5 Provisioning, administration, and maintenance Integrated web server provides web-based administration and configuration Integrated voice response system to report and modify configuration parameters Automated provisioning and upgrade via HTTPS, HTTP, TFTP Asynchronous notification of upgrade availability via NOTIFY Nonintrusive in-service upgrades Report generation and event logging Statistics transmitted in BYE message Syslog and debug server records: configurable per line Physical interfaces One 10BASE-T RJ-45 Ethernet port (IEEE 802.3) Handset: RJ-9 connector Power supply Indicator lights/led Documentation Dimensions (W x H x D) Unit weight Operating temperature Storage temperature Operating humidity Storage humidity 5V, 2A Switching Power Adaptor Status LED Message waiting indicator LED Quick-Start Installation and Configuration Guide User Guide Administration Guide Provisioning Guide (for service providers only) 4.13 x 3.75 x 8.38 in. ( x x mm) 1.70 lb ( kg) 32º to 113ºF (0º to 45ºC) 13º to 185ºF ( 25º to 85ºC) 10% to 90% noncondensing 10% to 90% noncondensing Package Contents Cisco SPA901 IP Phone and handset Handset cord 5V power adapter RJ-45 Ethernet cable Quick Installation Guide Table 2. Cisco SPA IP Phone Comparison Chart Model Voice Lines Ethernet Ports High-Resolution Graphical Display PoE Support SPA No No SPA Yes No SPA Yes Yes SPA Yes No SPA Yes Yes SPA Color Yes Cisco Limited Warranty for Cisco Small Business Series Products This Cisco Small Business product comes with a 2-year limited hardware warranty with return to factory replacement. In addition, Cisco offers software application updates for bug fixes and telephone technical support at no charge for the first 12 months following the date of purchase. To download software updates, go to: Product warranty terms and other information applicable to Cisco products are available at For More Information For more information on Cisco Small Business products and solutions, visit: Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 5 of 6

transmitted in BYE message Syslog and debug server records: configurable per line Physical interfaces One 10BASE-T RJ-45 Ethernet port (IEEE 802.

Cisco SPA 301 1-Line IP Phone Cisco Small Business Pro IP Phones

Cisco SPA 301 1-Line IP Phone Cisco Small Business Pro IP Phones Basic, Affordable, IP Phone for Business or Home Office Highlights Basic 1-line business-class IP phone Connects directly to an Internet