HP SDN VM and Ubuntu Setup

Transcription

1 HP SDN VM and Ubuntu Setup Technical Configuration Guide Version: 1 September 2013

2

3 Table of Contents Introduction... 2 Option 1: VirtualBox Preconfigured Setup... 2 Option 2: VMware Setup (from scratch)... 5 Resources, contacts, or additional links Learn more at hp.com/networking... 10

4 Introduction This document describes the setup of two Ubuntu virtual machines necessary to setup an HP SDN development environment: Ubuntu Desktop: Developer Host Ubuntu Server LTS: HP SDN Controller and Mininet These VMs must be connected via an internal adapter within VMWare. Figure 1: SDN Environment There are two options to install these VMs: VirtualBox preconfigured setup VMWare setup In subsequent documents it is assumed that these VMs have been installed following one of these two procedures. Option 1: VirtualBox Preconfigured Setup Open Virtualization Format (OVF) is an open standard for distributing virtual appliances or virtual machines. These files can be used across multiple hypervisors and processor architectures. The OVF package consists of server files within a directory. The directory can be distributed as an OVA package, which is a tar archive file with the OVF directory inside. Two OVA files are provided which contain all the required files for Mininet and the SDN controller. To use the preconfigured OVA files, import both files into virtual box by double clicking on them (see next slides for more details). The developer OVA file is larger than the controller OVA file. Preconfigured OVA files: SDN Controller.ova Ubuntu Server (No GUI interface) Controller software and Mininet 1.2 GB size SDN Developer.ova Ubuntu Desktop (GUI interface) Developer tools 3GB in size Import both files into Virtual box (or other) Software platform options 2

5 HP SD VM and Ubuntu Setup VirtualBox ( These can be imported into VMWARE for example Setup VitualBox Download the appropriate version for your operating system from and follow the prompts to install the software Figure 2: VM VirtualBox setup The two preconfigured OVA files available that include all the required software. The two machines are a Developer Host running the Ubuntu Desktop version, and the second one runs Ubuntu Server LTS. The server version is where the HP SDN Controller and Mininet are installed. They are connected via an internal adapter within VirtualBox. The SDN developer host has an IP address of and the SDN Controller host has an IP address of All pre-requisite software is installed allowing for immediate install of the HP SDN controller software. The SDN developer host is not an absolute requirement. This could be replaced and the host operating system could be used to connect to the controller. However, to be consistent, both these machines will be used in the labs in this course. The two machines are connected internally and the developer machine is also bridged so that it can be used to connect to the Internet. Software installed on the Controller host includes: Open jdk 7 jre headless Postgresql Keystone Mininet Software installed on the Developer host includes: Openjdk Maven Eclipse Curl Samples Download the Controller OVA file from: This link will be updatd when the controller is publicly available. Then double click on the OVA file to import the appliance into VirtualBox. Download the Controller OVA file from: This link will be updatd when the controller is publicly available. Then double click on the OVA file to import the appliance into VirtualBox. 3

6 Figure 3: VM VirtualBox appliance importation Once imported, both machines should show in VirtualBox and they can now be started by clicking on the Start button. Figure 4: VM VirtualBox Manager Start SDN Controller VM Select SDN Controller VM and press Start Press Change Network Settings button on the dialog Press the OK button to accept the default network adapter Login as user sdn with password skyline to verify, then logout Start SDN Developer VM Select SDN Developer VM and press Start Press Change Network Settings button on the dialog Press the OK button to accept the default network adapters Login as user sdn with password skyline. Configure VM VirtualBox network An error may display stating that a physical network interface was not found. This is an expected error. Click on the Change Network Settings button and then click OK to correct the error. You may need to do this for both the Controller and Developer virtual machines. Figure 5: VM VirtualBox - network interface was not found error If no Host-Only adapter exists, add one to VirtualBox by following these steps: Select File & Preferences in VirtualBox Select Network category Add a new VirtualBox Host-Only Ethernet Adapter if you already do not have one Press the OK button Once imported, two virtual machines should be available and have connectivity between them. 4

7 HP SD VM and Ubuntu Setup Figure 6: VM VirtualBox Ubuntu VMs Login and test connectivity. Click on Terminal to start a terminal session. Then ping the Controller VM: The following steps have been used to prepare the SDN Controller VM and are not required if the OVA files are used within VirtualBox Base OS Ubuntu Server LTS amd64 Patch to latest updates and 3.5 kernel Install Additional Packages The additional required packages can be installed using the following commands: sudo apt-get install python-software-properties ubuntu-cloud-keyring sudo add-apt-repository "deb precise-updates/folsom main" sudo apt-get update sudo apt-get install openjdk-7-jre-headless postgresql keystone keystone-doc python-keyston Note The development environment is ready to be used. Installation of the HP SDN controller and Mininet is described in the corresponding documents in this portfolio. Option 2: VMware Setup (from scratch) The following list shows the steps to install the SDN Controller from scratch. Configure VMWare Install Ubuntu - Controller Controller requires: Ubuntu Server LTS amd64 Patch to latest updates and 3.5 kernel Install Ubuntu Developer Ubuntu Desktop Version Configure networking Configure IP addresses Install prerequisite software on Controller VM 5

8 OpenJDK 7 JRE PostgreSQL 9.1 Keystone Install Curl on Developer VM Enable SSH on Developer and Controller VMs Download Ubuntu The HP SDN Controller requires: Ubuntu Server LTS amd64 patched to latest updates and 3.5 kernel. To download Ubuntu, use the following links. Ubuntu Server: Ubuntu Desktop: Create a new virtual machine (VM) for new install of Ubuntu Follow the Wizard s instructions. Figure 7: VM Creation Point VMWare to the downloaded ISO image Select a username and password Configure install directory and machine name Select 20GB as disk size Click Finish to confirm VMWare restarts and Ubuntu is installed. Figure 8: Ubuntu VM Installation This process needs to be done twice: For the SDN controller VM Ubuntu Server 6

9 HP SD VM and Ubuntu Setup For the SDN developer VM Ubuntu Desktop Figure 9: Controller VM Ubuntu Server Note The Controller VM still requires the installation of pre-requisite software including Mininet. Figure 10: Developer VM Ubuntu Desktop Note Once the installation process ends, both Ubuntu VMs are ready for login. However, before logging in, network adapters must be configured on each VM. Configure two network adapters on the Developer VM: Network Adapter 1: Custom connection Connected to VMnet2 IP address manually configured Network Adapter 2: Bridged connection 7

10 Connected to physical network Requires IP address from DHCP server and Internet access Configure two network adapters on the Controller VM: Network Adapter 1: Custom connection Connected to VMnet2 IP address manually configured Network Adapter 2: Bridged connection Connected to physical network Requires IP address from DHCP server and Internet access Figure 11: Developer and controller VM s network adapters Configure connectivity between the Developer VM and the Controller VM within VMWare Select the VM, then Settings, and ensure that a virtual network is configured between the Developer and Controller using VMnet2. Another network adapter is added to both the Developer and Controller VMs and bridged to the external network. This second interface will be used for updating the software from Ubuntu.com Login to both VMs. The controller VM offers the CLI by default while the developer VM offers the GUI by default. On the developer VM: Select Dash home Search for terminal Select terminal Type commands in terminal window Configure IP addresses for internal communication SDN Controller VMnet2 interface sudo ifconfig eth netmask SDN Developer VMnet2 interface sudo ifconfig eth netmask Ping Controller VM from the Developer VM ping Configure IP addresses for external communication SDN Controller Outside interface either configure statically or use DHCP sudo ifconfig eth0 x.x.x.x netmask or 8

11 HP SD VM and Ubuntu Setup sudo ifconfig eth0 dhcp SDN Developer Outside interface either configure statically or use DHCP sudo ifconfig eth0 x.x.x.x netmask or sudo ifconfig eth0 dhcp Install the following dependencies on the HP SDN Controller VM: OpenJDK 7 JRE PostgreSQL 9.1 Keystone To do this, connect via the CLI and type the commands: sudo apt-get install python-software-properties ubuntu-cloud-keyring sudo add-apt-repository deb precise-updates/folsom main sudo apt-get update Install Headless Open JDK using the following command: sudo apt-get install openjdk-7-jre-headless postgresql keystone keystone-doc python-keyston Install Curl on the Developer VM machine. Curl is used in the REST API labs. Use the following commands to install curl and restart the web service: $ sudo apt-get install curl libcurl3 libcurl3-dev php5-curl $ sudo /etc/init.d/apache2 restart Enable SSH on both VMs $ sudo apt-get install openssh-server The sample scripts and files need to be downloaded and uploaded to the Developer virtual machine. Ask your instructor for the files or download from: This link will be updatd when the controller is publicly available.configure IP addresses for external communication SDN Developer needs an IP address via DHCP or manually configured sudo ifconfig eth1 x.x.x.x netmask Copy SDN files via FileZilla Use SFTP SSH File Transfer Protocol. Configure settings such as username and password. Accept keys when prompted. Note The development environment is ready to be used. Installation of the HP SDN controller and Mininet is described in the corresponding documents in this portfolio. 9

12 Resources, contacts, or additional links HP SDN: HP SDN SDK and documentation: Learn more at hp.com/networking Sign up for updates hp.com/go/getupdated Share with colleagues Rate this document Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. October 2013