MikroTik Training Module Understanding VLAN Translation/Rewrites using Switches and Routers
|
|
|
- Justina Grant
- 8 years ago
- Views:
Transcription
1 1-855-MIKROTIK MikroTik Training Module Understanding VLAN Translation/Rewrites using Switches and Routers P R E S E N T E D B Y : KEVIN MYERS, NETWORK ARCHITECT / MANAGING PARTNER MTCINE #1409 I P A R C H I T E C H S M A N A G E D S E R V I C E S
2 Instructor Background Kevin Myers, Network Architect 17 + years in IT, Network Architecture and Engineering Areas of Design Focus: MikroTik integration with large multi-vendor networks Design of BGP/MPLS/OSPF Service Provider Triple-Play networks Design of large enterprise Data Center networks Certifications MTCINE #1409 Certified CCNP, CCNA, MCP, MTCRE, MTCTCE, MTCNA
3 MikroTik Training VLAN Translation/Rewrites Objectives Student will learn what a VLAN Translation is and the different use cases Student will learn the different implementation types for VLAN rewrites in RouterOS Student will successfully complete an implementation lab that uses VLAN translations in a Router and CRS switch. Lab Tasks Configure a VLAN translation between two VLANs in a CRS switch / RouterBoard and successfully ping between two laptops.
4 MikroTik Training VLAN Translation/Rewrites What is VLAN Translation? VLAN Translation (or rewrite) involves replacing one ingress tag with another and vice-versa on egress. Example: Data Center 1 (NYC, NY, USA) needs to extend Vlan 101 for web Servers on /24 to the Denver, CO DC Data Center 2 (Denver, CO, USA) uses Vlan 101 for storage replication on /24 VLAN /24 from NYC must be rewritten in Denver as VLAN 201 to avoid conflict with the Storage Replication. MikroTik routers can do this via bridging / switching
5 MikroTik Training VLAN Translation/Rewrites Example: VLAN 101 in NYC becomes VLAN 201 once it reaches Denver, CO. The broadcast domain (light blue) is the same even though the VLAN tag changes
6 MikroTik Training VLAN Translation/Rewrites Example: VLAN 101 in NYC becomes VLAN 201 once it reaches Denver, CO. The broadcast domain (light blue) is the same even though the VLAN tag changes Q. What is a broadcast domain? Q. What Layer of the OSI Model does it exist at? Q. Why would this be important when rewriting VLANs?
7 MikroTik Training VLAN Translation/Rewrites What problem are we trying to solve? Merging companies When large companies merge, there are often duplicate VLANS with different functions in campus and headquarters environments Data Center Interconnect (DCI) When connecting large data centers at Layer 2, VLAN overlap is a major issue. A VLAN in one data center may used for web servers, while the same VLAN number in another data center could be for database servers. Service Provider Large carrier networks often deal with overlapping VLANs from customers and other providers. VLAN translation can be used to join segments with different tags or prevent overlap. What are some other use cases for VLAN Translations?
8 MikroTik Training VLAN Translation/Rewrites Configuration example - Bridging This configuration can be used in almost any RouterBoard to translate between VLANs using a bridge. Create VLAN 100 and 3100 interface VLANs Create Bridge and add VLAN interface ports
9 MikroTik Training VLAN Translation/Rewrites Configuration Task MIKROTIK Challenge: Two students must configure a routerboard to translate between VLAN 500 and VLAN 3500 and be able to ping from Laptop A ( /24) and Laptop B ( /24) Materials: Routerboard with 2 Ethernet ports and two laptops with Ethernet ports.
10 MikroTik Training VLAN Translation/Rewrites Configuration example Switching (CRS) This configuration can be used in all CRS models to translate between VLANs using ingress and egress VLAN rewrites. Create ingress VLAN translations Create egress VLAN translations
11 MikroTik Training VLAN Translation/Rewrites How do we know that config worked? Packet Sniffer using port mirroring on the CRS Switch ports on CRS do not show up in packet sniffer unless a mirror is set up and pointed to the CPU.
12 MikroTik Training VLAN Translation/Rewrites How do we know that config worked? Packet capture of ICMP between R1 and R2 in Wireshark
13 MikroTik Training VLAN Translation/Rewrites How do we know that config worked? Packet capture of ICMP from /24 (VLAN 101) to /24 (VLAN 201) in Wireshark
14 MikroTik Training VLAN Translation/Rewrites How do we know that config worked? Packet capture of ICMP from /24 (VLAN 201) to /24 (VLAN 101) in Wireshark
15 MikroTik Training VLAN Translation/Rewrites VLAN Translation LAB Scenario Lab Guide /lab-2/ Introducing IP SafeNET, a Flat-Rate yearly MikroTik support contract Visit for details
16 MikroTik Training Lab Scenario Configuration Objective - Translate VLAN from R1 to R2 in your POD and ping successfully between laptops Students will be divided into groups of 2 (a POD) and assigned a POD Number Materials Needed per POD RouterBoard 2 RouterBoards (each with at least 2 Ethernet ports) Routerboard may be of any model that meets this requirment Laptop 2 Laptops (each with an Ethernet port and wireless) 4 Ethernet cables (Instructor will provide if the student does not have enough) Students can opt to connect to the R1 and R2 Routerboards via wireless this setup only requires (2) Ethernet cables CRS G-1S Switch Provided by the instructor Students will be assigned a pair of switch ports by POD to plug their routers into
17 MikroTik Training Lab Scenario
18 MikroTik Training Lab Scenario
19 MikroTik Training Lab Scenario Configuration Objective - Translate VLAN from R1 to R2 in your POD and ping successfully between laptops Write down the following information for your POD VLAN Assignment R1 VLAN 10x (Where x is the POD Number) R2 VLAN 20x (Where x is the POD Number)
20 MikroTik Training Lab Scenario Configuration Objective - Translate VLAN from R1 to R2 in your POD and ping successfully between laptops Write down the following information for your POD IP Address assignment for the Laptop Laptop connected to R x.200/24 (Where x is the POD Number) Laptop connected to R x.201/24 (Where x is the POD Number)
21 MikroTik Training Lab Scenario Configuration Objective - Translate VLAN from R1 to R2 in your POD and ping successfully between laptops Step 1 Reset system config with no default on both routerboards in the pod This lab was built and tested with ROS 6.27 you may use this or try another version Step 2 Connect all devices in your POD according to the topology diagram and the specific ports assigned to your POD in the CRS Please ask for Ethernet cables from the instructor if you do not have enough
22 MikroTik Training Lab Scenario Configuration Objective - Translate VLAN from R1 to R2 in your POD and ping successfully between laptops Step 3 Assign the IPs for your POD in both laptops 10.1.x.200 and.201 (Where x is your POD number) Example (Windows) Using POD1 Laptop 1 (NOTE: No default gateway is needed for this lab)
23 MikroTik Training Lab Scenario Configuration Objective - Translate VLAN from R1 to R2 in your POD and ping successfully between laptops Step 4 Configure each lab Routerboard for the following R1 Set system identity as PODx-R1 (where x is your POD number) R2 Set system identity as PODx-R2 (where x is your POD number)
24 MikroTik Training Lab Scenario Configuration Objective - Translate VLAN from R1 to R2 in your POD and ping successfully between laptops Step 5 Configure each lab Routerboard for the following R1 - Interface Vlan 10x on eth1 (where x is your POD number) R2 - Interface Vlan 20x on eth1 (where x is your POD number)
25 MikroTik Training Lab Scenario Configuration Objective - Translate VLAN from R1 to R2 in your POD and ping successfully between laptops Step 6 NOTE: a wlan interface can be used instead of eth2 Configure each lab Routerboard for the following R1 VLAN10x-Bridge (where x is your POD number) and add ports eth2 and Vlan10x R2 VLAN20x-Bridge (where x is your POD number) and add ports eth2 and Vlan20x
26 MikroTik Training Lab Scenario Configuration Objective - Translate VLAN from R1 to R2 in your POD and ping successfully between laptops Step 7 CRS Config - Connect via wireless to CRS Management Network SSID: IPA-LAB PSK: mum2015miami Use Winbox to connect to CRS on User: labuser Password: labuser
27 1-855-MIKROTIK MikroTik Training Lab Scenario Configuration Objective - Translate VLAN from R1 to R2 in your POD and ping successfully between laptops Step 8 Configure Ingress VLAN translation (POD1 shown as an example) Ether1 VLAN 101 to VLAN 201 (Use the correct port and VLAN for your POD) Ether2 VLAN 201 to VLAN 101 (Use the correct port and VLAN for your POD)
28 MikroTik Training Lab Scenario Configuration Objective - Translate VLAN from R1 to R2 in your POD and ping successfully between laptops Step 8 Configure Egress VLAN translation (POD1 shown as an example) Ether1 VLAN 201 to VLAN 101 (Use the correct port and VLAN for your POD) Ether2 VLAN 101 to VLAN 201 (Use the correct port and VLAN for your POD)
29 MikroTik Training Lab Scenario Configuration Objective - Translate VLAN from R1 to R2 in your POD and ping successfully between laptops Step 8 Validation Ping from laptop to laptop (be sure to turn off software firewalls)
Understanding VLAN Translation/Rewrites using Switches and Routers
www.iparchitechs.com 1-855-MIKROTI(K) Understanding VLAN Translation/Rewrites using Switches and Routers KEVIN MYERS, NETWORK ARCHITECT / MANAGING PARTNER MTCINE #1409 MIKROTIK CERTIFIED TRAINER Kevin
Network Architecture Validated designs utilizing MikroTik in the Data Center
1-855-MIKROTIK Network Architecture Validated designs utilizing MikroTik in the Data Center P R E S E N T E D B Y: K E V I N M Y E R S, N E T W O R K A R C H I T E C T / M A N AG I N G PA R T NER I P A
GregSowell.com. Mikrotik Basics
Mikrotik Basics Terms Used Layer X When I refer to something being at layer X I m referring to the OSI model. VLAN 802.1Q Layer 2 marking on traffic used to segment sets of traffic. VLAN tags are applied
MIKROTIK NETWORK SIMULATOR
MIKROTIK NETWORK SIMULATOR PRESENTED BY ROFIQ FAUZI MUM Nov 2013 - Indonesia ABOUT ROFIQ FAUZI 2 Using MikroTik (v.2.97) since 2005, as Network Engineer at WISP. 2007, Network & Wireless Engineer at INDOSAT
VLAN in MikroTik. By Mohammed Khomeini Bin ABU MUM Indonesia, 2013
VLAN in MikroTik By Mohammed Khomeini Bin ABU MUM Indonesia, 2013 About Presentation To help you understand fundamental of Virtual Local Area Network (VLAN) and implementation in MikroTik router To explain
Quality of Service in wireless Point-to-Point Links
Quality of Service in wireless Point-to-Point Links MikroTik User Meeting, St. Louis, MO, USA, September 19-20 2013 menschen.computer.netzwerke Bottenbacher Str. 78 57223 Kreuztal Tel: +49.2732.55856-0
Introduction. What is a Remote Console? What is the Server Service? A Remote Control Enabled (RCE) Console
Contents Introduction... 3 What is a Remote Console?... 3 What is the Server Service?... 3 A Remote Control Enabled (RCE) Console... 3 Differences Between the Server Service and an RCE Console... 4 Configuring
Lab 4.5.2 Diagramming Intranet Traffic Flows
Lab 4.5.2 Diagramming Intranet Traffic Flows Objective Device Designation Device Name Address Subnet Mask Discovery Server Business Services 172.17.1.1 255.255.0.0 R1 FC-CPE-1 Fa0/1 172.17.0.1 Fa0/0 10.0.0.1
FSM73xx GSM73xx GMS72xxR Shared access to the Internet across Multiple routing VLANs using a Prosafe Firewall
FSM73xx GSM73xx GMS72xxR Shared access to the Internet across Multiple routing VLANs using a Prosafe Firewall This document describes how to: - Create multiple routing VLANs - Obtain Internet access on
BGP as an IGP for Carrier/Enterprise Networks
BGP as an IGP for Carrier/Enterprise Networks Presented by: Kevin Myers, SENIOR NETWORK ENGINEER IP ArchiTECHS MANAGED SERVICES Background Kevin Myers 15 + years in IT/Network Engineering Designed and
Create Virtual AP for Network Campus with Mikrotik
Create Virtual AP for Network Campus with Mikrotik Mikrotik User Meeting Bali,June 14 2008 1 Introduction Name : Nicholaus Ola Malun,S.Si Nick Name : Nico Country : Jakarta, Indonesia Bachelor degree on
WISP 101. The DO s and DON T s of becoming a Wireless ISP
WISP 101 The DO s and DON T s of becoming a Wireless ISP WISP 101 topics Choosing your hardware Setting up the Highsite Hardware Software Security Wireless Backhaul Setting up the client Choosing your
1 Basic Configuration of Cisco 2600 Router. Basic Configuration Cisco 2600 Router
1 Basic Configuration of Cisco 2600 Router Basic Configuration Cisco 2600 Router I decided to incorporate the Cisco 2600 into my previously designed network. This would give me two seperate broadcast domains
VLANs. Application Note
VLANs Application Note Table of Contents Background... 3 Benefits... 3 Theory of Operation... 4 IEEE 802.1Q Packet... 4 Frame Size... 5 Supported VLAN Modes... 5 Bridged Mode... 5 Static SSID to Static
estadium Project Lab 8: Wireless Mesh Network Setup with DD WRT
estadium Project Lab 8: Wireless Mesh Network Setup with DD WRT Objectives To become familiar with wireless mesh networks and show set up a wireless mesh network test bed using the DD WRT firmware. We
Installation of the On Site Server (OSS)
Installation of the On Site Server (OSS) rev 1.1 Step #1 - Initial Connection to the OSS Having plugged in power and an ethernet cable in the eth0 interface (see diagram below) you can connect to the unit
Enabling Multiple Wireless Networks on RV320 VPN Router, WAP321 Wireless-N Access Point, and Sx300 Series Switches
print email Article ID: 4941 Enabling Multiple Wireless Networks on RV320 VPN Router, WAP321 Wireless-N Access Point, and Sx300 Series Switches Objective In an ever-changing business environment, your
MikroTik Certified Network Associate (MTCNA) Training outline
MikroTik Certified Network Associate (MTCNA) Training outline Suggested duration: Objectives: Target Audience: Course prerequisites: 5 days of 6.5 hours each. By the end of this training session, the student
JOB READY ASSESSMENT BLUEPRINT COMPUTER NETWORKING FUNDAMENTALS - PILOT. Test Code: 4514 Version: 01
JOB READY ASSESSMENT BLUEPRINT COMPUTER NETWORKING FUNDAMENTALS - PILOT Test Code: 4514 Version: 01 Specific Competencies and Skills Tested in this Assessment: PC Principles Identify physical and equipment
High Availability on MikroTik RouterOS
High Availability on MikroTik RouterOS GUILHERME RAMIRES About me Nome: Guilherme Ramires System Analyst CTO of Alive Solutions Trainings, Consulting and Network Projects CEO of Alive Store Resale of Mikrotik
WLAN Outdoor CPE For 2.4G. Quick Installation Guide
WLAN Outdoor CPE For 2.4G Quick Installation Guide Part I: External Installation Direction A. Check the parts in your box CPE SET 1 DC 12V/1.5A Power Adapter 1 PoE DC Injector 1 Hose Clamps 2 Manual &
Lab - Using IOS CLI with Switch MAC Address Tables
Topology Addressing Table Objectives Device Interface IP Address Subnet Mask Default Gateway R1 G0/1 192.168.1.1 255.255.255.0 N/A S1 VLAN 1 192.168.1.11 255.255.255.0 192.168.1.1 S2 VLAN 1 192.168.1.12
STANDARD OPERATING PROCEDURE. For. MIKROTIK ROUTERBOARD RB1100AH (For ADSL)
MSD DIGITAL INTELLIGENCE SDN.BHD. STANDARD OPERATING PROCEDURE For MIKROTIK ROUTERBOARD RB1100AH (For ADSL) This document has been prepared for the Customer's sole and exclusive information and use and
Technical Note. Monitoring Ethernet Traffic with Tolomatic ACS & Managed Switch. Contents
Monitoring Ethernet Traffic with Tolomatic ACS & Managed Switch Contents 1. Introduction...2 2. Equipment...2 3. Software...3 4. Definitions...3 5. Procedure...3 6. Change PC IP Address...3 7. Network
SSVP SIP School VoIP Professional Certification
SSVP SIP School VoIP Professional Certification Exam Objectives The SSVP exam is designed to test your skills and knowledge on the basics of Networking and Voice over IP. Everything that you need to cover
Lab 9.1.1 Organizing CCENT Objectives by OSI Layer
Lab 9.1.1 Organizing CCENT Objectives by OSI Layer Objectives Organize the CCENT objectives by which layer or layers they address. Background / Preparation In this lab, you associate the objectives of
Packet Tracer - Subnetting Scenario 1 (Instructor Version)
(Instructor Version) Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only. Optional activities are designed to enhance understanding and/or to provide
Building Effective Firewalls with MikroTik P R E S E N T E D B Y: R I C K F R E Y, N E T W O R K E N G I N E E R I P A R C H I T E C H S O P E R AT I
1-855-MIKRO-TIK Building Effective Firewalls with MikroTik P R E S E N T E D B Y: R I C K F R E Y, N E T W O R K E N G I N E E R I P A R C H I T E C H S O P E R AT I O N S Background Rick Frey 20+ years
How To Connect Xbox 360 Game Consoles to the Router by Ethernet cable (RJ45)?
Is it really necessary for the three ports mentioned in Troubleshooting (UDP 88, UDP 3074, and TCP 3074) to be opened for Xbox Live to work properly? Most cable/dsl routers implement Network Address Translation
Access Point Configuration
Access Point Configuration Developed by IT +46 Based on the original work of: Onno Purbo and Sebastian Buettrich Goals Provide a general methodology to installation and configuration of access points Give
Local Area Networking technologies Unit number: 26 Level: 5 Credit value: 15 Guided learning hours: 60 Unit reference number: L/601/1547
Unit title: Local Area Networking technologies Unit number: 26 Level: 5 Credit value: 15 Guided learning hours: 60 Unit reference number: L/601/1547 UNIT AIM AND PURPOSE Learners will gain an understanding
Lab 8.5.3 Configuring the PIX Firewall as a DHCP Server
Lab 8.5.3 Configuring the PIX Firewall as a DHCP Server Objective Scenario Estimated Time: 15 minutes Number of Team Members: Two teams with four students per team. In this lab, students will learn the
CCNA Discovery 4.0.3.0 Networking for Homes and Small Businesses Student Packet Tracer Lab Manual
4.0.3.0 Networking for Homes and Small Businesses Student Packet Tracer Lab Manual This document is exclusive property of Cisco Systems, Inc. Permission is granted to print and copy this document for non-commercial
Lab 5.5.3 Developing ACLs to Implement Firewall Rule Sets
Lab 5.5.3 Developing ACLs to Implement Firewall Rule Sets All contents are Copyright 1992 2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 8 Device Interface
UTM10 in multi-ssid, multi-vlan network with WMS5316. Network diagram
UTM10 in multi-ssid, multi-vlan network with WMS5316 This document describes how to use the UTM10 (unified threat management system) and WMS5316 (wireless management system) to create a multi-vlan, multi-ssid
NETE-4635 Computer Network Analysis and Design. Designing a Network Topology. NETE4635 - Computer Network Analysis and Design Slide 1
NETE-4635 Computer Network Analysis and Design Designing a Network Topology NETE4635 - Computer Network Analysis and Design Slide 1 Network Topology Design Themes Hierarchy Redundancy Modularity Well-defined
Management Software. Web Browser User s Guide AT-S106. For the AT-GS950/48 Gigabit Ethernet Smart Switch. Version 1.0.0. 613-001339 Rev.
Management Software AT-S106 Web Browser User s Guide For the AT-GS950/48 Gigabit Ethernet Smart Switch Version 1.0.0 613-001339 Rev. A Copyright 2010 Allied Telesis, Inc. All rights reserved. No part of
How to Set Up a Wireless Network. How to configure a wireless network for a computer science programming contest using PC 2
How to Set Up a Wireless Network How to configure a wireless network for a computer science programming contest using PC 2 Checklist: The procedure to set up a wireless network is not difficult at all.
Quick Note 53. Ethernet to W-WAN failover with logical Ethernet interface.
Quick Note 53 Ethernet to W-WAN failover with logical Ethernet interface. Digi Support August 2015 1 Contents 1 Introduction... 2 1.1 Introduction... 2 1.2 Assumptions... 3 1.3 Corrections... 3 2 Version...
How To Understand and Configure Your Network for IntraVUE
How To Understand and Configure Your Network for IntraVUE Summary This document attempts to standardize the methods used to configure Intrauve in situations where there is little or no understanding of
Layer 2 / Layer 3 switches and multi-ssid multi-vlan network with traffic separation
Layer 2 / Layer 3 switches and multi-ssid multi-vlan network with traffic separation This document describes the steps to undertake in configuring a Layer 2/Layer 3 switch (in this document a FMS7382S
Networking and High Availability
TECHNICAL BRIEF Networking and High Availability Deployment Note Imperva appliances support a broad array of deployment options, enabling seamless integration into any data center environment. can be configured
IT 3202 Internet Working (New)
[All Rights Reserved] SLIATE SRI LANKA INSTITUTE OF ADVANCED TECHNOLOGICAL EDUCATION (Established in the Ministry of Higher Education, vide in Act No. 29 of 1995) Instructions for Candidates: Answer any
Top-Down Network Design
Top-Down Network Design Chapter Five Designing a Network Topology Copyright 2010 Cisco Press & Priscilla Oppenheimer Topology A map of an internetwork that indicates network segments, interconnection points,
Internetworking Microsoft TCP/IP on Microsoft Windows NT 4.0
Internetworking Microsoft TCP/IP on Microsoft Windows NT 4.0 Course length: 5 Days Course No. 688 - Five days - Instructor-led Introduction This course provides students with the knowledge and skills required
GregSowell.com. Mikrotik Security
Mikrotik Security IP -> Services Disable unused services Set Available From for appropriate hosts Secure protocols are preferred (Winbox/SSH) IP -> Neighbors Disable Discovery Interfaces where not necessary.
Industrial Network Security for SCADA, Automation, Process Control and PLC Systems. Contents. 1 An Introduction to Industrial Network Security 1
Industrial Network Security for SCADA, Automation, Process Control and PLC Systems Contents 1 An Introduction to Industrial Network Security 1 1.1 Course overview 1 1.2 The evolution of networking 1 1.3
RAP Installation - Updated
RAP Installation - Updated August 01, 2012 Aruba Controller Release 6.1.3.2 The Controller has several wizards that can guide you through a variety of configuration processes. On the Configuration tab
Best Practices: Pass-Through w/bypass (Bridge Mode)
Best Practices: Pass-Through w/bypass (Bridge Mode) EdgeXOS Deployment Scenario: Bridge Pass-Through This document is designed to provide an example as to how the EdgeXOS appliance is configured based
Packet Tracer - Connecting a Wired and Wireless LAN Topology
Topology 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 5 Addressing Table Objectives Cloud Cable Modem Router0 Router1 WirelessRouter Part 1: Connect to
Bandwidth-based load-balancing with failover. The easy way. We need more bandwidth.
Bandwidth-based load-balancing with failover. The easy way. We need more bandwidth. Presenter information Tomas Kirnak Network design Security, wireless Servers, Virtualization Mikrotik Certified Trainer
9 Simple steps to secure your Wi-Fi Network.
9 Simple steps to secure your Wi-Fi Network. Step 1: Change the Default Password of Modem / Router After opening modem page click on management - access control password. Select username, confirm old password
CAPsMAN Case Study. Uldis Cernevskis MikroTik, Latvia. MUM Pittsburgh September 2014
CAPsMAN Case Study Uldis Cernevskis MikroTik, Latvia MUM Pittsburgh September 2014 CAPsMAN Features Centralized management of RouterOS APs Dual Band AP support Provisioning of APs MAC and IP Layer communication
IT-AD08: ADD ON DIPLOMA IN COMPUTER NETWORK DESIGN AND INSTALLATION
IT-AD08: ADD ON DIPLOMA IN COMPUTER NETWORK DESIGN AND INSTALLATION Objective of the course: This course is designed to impart professional training to the students of computer Science, computer applications,
Lab 8.4.2 Configuring Access Policies and DMZ Settings
Lab 8.4.2 Configuring Access Policies and DMZ Settings Objectives Log in to a multi-function device and view security settings. Set up Internet access policies based on IP address and application. Set
Implementation IPV6 in Mikrotik RouterOS. by Teddy Yuliswar
Implementation IPV6 in Mikrotik RouterOS by Teddy Yuliswar YOGYAKARTA, OCTOBER 09 10, 2015 TEDDY YULISWAR Introduction q MTCNA, MTCRE, MTCTCE, MTCINE q Place of Hanging out : - Politeknik Negeri Padang
TE100-P21/TEW-P21G Windows 7 Installation Instruction
Hardware Installation TE100-P21/TEW-P21G Windows 7 Installation Instruction 1. Go to http://www.trendnet.com/downloads/ to download the Windows 7 Utility. Save the file to your desktop. 2. Right click
Layer 3 Network + Dedicated Internet Connectivity
Layer 3 Network + Dedicated Internet Connectivity Client: One of the IT Departments in a Northern State Customer's requirement: The customer wanted to establish CAN connectivity (Campus Area Network) for
Computer Networking. Definitions. Introduction
Computer Networking Definitions DHCP Dynamic Host Configuration Protocol It assigns IP addresses to client devices, such as desktop computers, laptops, and phones, when they are plugged into Ethernet or
Implementation of Virtual Local Area Network using network simulator
1060 Implementation of Virtual Local Area Network using network simulator Sarah Yahia Ali Department of Computer Engineering Techniques, Dijlah University College, Iraq ABSTRACT Large corporate environments,
Knowledgebase Solution
Knowledgebase Solution Goal Enable coexistence of a 3 rd -party VPN / Firewall with an EdgeMarc appliance. Describe characteristics and tradeoffs of different topologies. Provide configuration information
VLAN Workshop. Presenter: Paul Eriksson. VLAN Workshop 2009 RoamingNet Sweden (www.roamingnet.com) 1
VLAN Workshop. Presenter: Paul Eriksson VLAN Workshop 2009 RoamingNet Sweden (www.roamingnet.com) 1 About this presentation A seed from the forum by Randy (Graham)?: http://forum.mikrotik.com/viewtopic.php?f=2&t=24352
Connect the Host to attach to Fast Ethernet switch port Fa0/2. Configure the host as shown in the topology diagram above.
Lab 1.2.2 Capturing and Analyzing Network Traffic Host Name IP Address Fa0/0 Subnet Mask IP Address S0/0/0 Subnet Mask Default Gateway RouterA 172.17.0.1 255.255.0.0 192.168.1.1 (DCE) 255.255.255.0 N/A
MFC6490CW Windows Network Connection Repair Instructions
Difficulty printing from your PC can occur for various reasons. The most common reason a networked Brother machine may stop printing, is because the connection between the computer and the Brother machine
SolarWinds Certified Professional. Exam Preparation Guide
SolarWinds Certified Professional Exam Preparation Guide Introduction The SolarWinds Certified Professional (SCP) exam is designed to test your knowledge of general networking management topics and how
IP Addressing and Subnetting. 2002, Cisco Systems, Inc. All rights reserved.
IP Addressing and Subnetting 2002, Cisco Systems, Inc. All rights reserved. 1 Objectives Upon completion, you will be able to: Discuss the Types of Network Addressing Explain the Form of an IP Address
Design and Implementation Guide. Apple iphone Compatibility
Design and Implementation Guide Apple iphone Compatibility Introduction Security in wireless LANs has long been a concern for network administrators. While securing laptop devices is well understood, new
TRILL for Data Center Networks
24.05.13 TRILL for Data Center Networks www.huawei.com enterprise.huawei.com Davis Wu Deputy Director of Switzerland Enterprise Group E-mail: wuhuajun@huawei.com Tel: 0041-798658759 Agenda 1 TRILL Overview
SSVVP SIP School VVoIP Professional Certification
SSVVP SIP School VVoIP Professional Certification Exam Objectives The SSVVP exam is designed to test your skills and knowledge on the basics of Networking, Voice over IP and Video over IP. Everything that
Firewall VPN Router. Quick Installation Guide M73-APO09-380
Firewall VPN Router Quick Installation Guide M73-APO09-380 Firewall VPN Router Overview The Firewall VPN Router provides three 10/100Mbit Ethernet network interface ports which are the Internal/LAN, External/WAN,
How To Set Up Isonas Crystal Matrix On A Pc Or Mac Or Ipa (For A Mac) On A Network With A Network Switch (For An Ipa) On An Ip Address) On Your Ipa Or Ip Address On
Introduction ISONAS Crystal Matrix Advanced Networking Checklist Because of the simple network topology used for most ISONAS installations, the only network configuration typically required is to set the
Multi-Homing Dual WAN Firewall Router
Multi-Homing Dual WAN Firewall Router Quick Installation Guide M73-APO09-400 Multi-Homing Dual WAN Firewall Router Overview The Multi-Homing Dual WAN Firewall Router provides three 10/100Mbit Ethernet
Welcome to Todd Lammle s CCNA Bootcamp
Welcome to Todd Lammle s CCNA Bootcamp Todd Lammle Cisco Authorized CCNA Bootcamps are now available, delivered by CCSI instructor, and popular Sybex author Todd Lammle. Todd Lammle CCNA Training Boot
Device Interface IP Address Subnet Mask Default Gateway
Felix Rohrer Topology Diagram Addressing Table Device Interface IP Address Subnet Mask Default Gateway S1 VLAN 99 192.168.99.11 255.255.255.0 192.168.99.1 S2 VLAN 99 192.168.99.12 255.255.255.0 192.168.99.1
AP6511 First Time Configuration Procedure
AP6511 First Time Configuration Procedure Recommended Minimum Configuration Steps From the factory, all of the 6511 AP s should be configured with a shadow IP that starts with 169.254.xxx.xxx with the
Networking and High Availability
yeah SecureSphere Deployment Note Networking and High Availability Imperva SecureSphere appliances support a broad array of deployment options, enabling seamless integration into any data center environment.
Lab - Using Wireshark to View Network Traffic
Topology Objectives Part 1: (Optional) Download and Install Wireshark Part 2: Capture and Analyze Local ICMP Data in Wireshark Start and stop data capture of ping traffic to local hosts. Locate the IP
Skills Assessment Student Training Exam
Skills Assessment Student Training Exam Topology Assessment Objectives Part 1: Initialize Devices (8 points, 5 minutes) Part 2: Configure Device Basic Settings (28 points, 30 minutes) Part 3: Configure
Vocia MS-1 Network Considerations for VoIP. Vocia MS-1 and Network Port Configuration. VoIP Network Switch. Control Network Switch
Vocia MS-1 Network Considerations for VoIP Vocia software rev. 1.4 or higher required Vocia MS-1 and Network Port Configuration The Vocia Message Server 1 (MS-1) has a number of roles in a Vocia Paging
Topic 7 DHCP and NAT. Networking BAsics.
Topic 7 DHCP and NAT Networking BAsics. 1 Dynamic Host Configuration Protocol (DHCP) IP address assignment Default Gateway assignment Network services discovery I just booted. What network is this? What
This techno knowledge paper can help you if: You need to setup a WAN connection between a Patton Router and a NetGuardian.
Problem: Patton / 240T WAN Setup Platform: NetGuardian 240T This TKP is a guide to setting up a PPP to T1 WAN connection between a Patton Model 2603 Router and a NetGuardian 240T. The example in this guide
Load Balancing ContentKeeper With RadWare
Load Balancing ContentKeeper With RadWare The RadWare Fireproof may be used with ContentKeeper to provide load balanced and redundant Internet content filtering for your network. The RadWare FireProof
Lab 5.2.5 Configure IOS Firewall IDS
Lab 5.2.5 Configure IOS Firewall IDS Objective Scenario Topology: Estimated Time: 15 minutes Number of Team Members: Two teams with four students per team. In this lab, the student will learn how to perform
Chapter 4 Customizing Your Network Settings
. Chapter 4 Customizing Your Network Settings This chapter describes how to configure advanced networking features of the Wireless-G Router Model WGR614v9, including LAN, WAN, and routing settings. It
Advanced Higher Computing. Computer Networks. Homework Sheets
Advanced Higher Computing Computer Networks Homework Sheets Topic : Network Protocols and Standards. Name the organisation responsible for setting international standards and explain why network standards
GS700TS FS700TS Access to the Internet on multiple VLANS using Multi- Homing
GS700TS FS700TS Access to the Internet on multiple VLANS using Multi- Homing This document describes how to obtain Internet access on multiple VLANs using one Internet gateway capable of managing multiple
Network Setup Guide. 1 Glossary. 2 Operation. 1.1 Static IP. 1.2 Point-to-Point Protocol over Ethernet (PPPoE)
Network Setup Guide 1 Glossary 1.1 Static IP Computers are communicated and recognized by their own unique IP addresses over the Internet. Static IP provided by your ISP (Internet Service Provider) means
CS 326e F2002 Lab 1. Basic Network Setup & Ethereal Time: 2 hrs
CS 326e F2002 Lab 1. Basic Network Setup & Ethereal Time: 2 hrs Tasks: 1 (10 min) Verify that TCP/IP is installed on each of the computers 2 (10 min) Connect the computers together via a switch 3 (10 min)
How To Load Balance On A Libl Card On A S7503E With A Network Switch On A Server On A Network With A Pnet 2.5V2.5 (Vlan) On A Pbnet 2 (Vnet
H3C SecBlade LB Card Configuration Examples Keyword: LB Abstract: This document describes the configuration examples for the H3C SecBlade LB service cards in various applications. Acronyms: Acronym Full
PC/POLL SYSTEMS Version 7 Polling SPS2000 Cash Register TCP/IP Communications
PC/POLL SYSTEMS Version 7 Polling SPS2000 Cash Register TCP/IP Communications PC/POLL SYSTEMS supports native TCP/IP polling for the SPS2000 cash register. It is recommended users have the register updated
Network Architecture & Topology
Network Architecture & Topology Coleman Kane Coleman.Kane@ge.com August 25, 2014 Cyber Defense Overview Network Architecture & Topology 1 / 12 For the sake of this course, we will focus on switched (or
How To Set up and Configure the WNA-100 Wireless Network Adapter
How To Set up and Configure the WNA-100 Wireless Network Adapter Section 1: Set up and Connect the Adapter to a Computer, Then Configure the Computer to Communicate With the Adapter Before the adapter
Quick Installation Guide
0, Total 18 Quick Installation Guide Sep, 2013 1, Total 18 Thank you for purchasing Enterprise High Gain Outdoor CPE. This manual will instruct you how to configure and manage this CPE, enable you to use
Introduction about cisco company and its products (network devices) Tell about cisco offered courses and its salary benefits (ccna ccnp ccie )
CCNA Introduction about cisco company and its products (network devices) Tell about cisco offered courses and its salary benefits (ccna ccnp ccie ) Inform about ccna its basic course of networking Emergence
OVERLAYING VIRTUALIZED LAYER 2 NETWORKS OVER LAYER 3 NETWORKS
OVERLAYING VIRTUALIZED LAYER 2 NETWORKS OVER LAYER 3 NETWORKS Matt Eclavea (meclavea@brocade.com) Senior Solutions Architect, Brocade Communications Inc. Jim Allen (jallen@llnw.com) Senior Architect, Limelight
Interconnecting Cisco Networking Devices, Part 1 (ICND1) v3.0
Interconnecting Cisco Networking Devices, Part 1 (ICND1) v3.0 COURSE OVERVIEW: Interconnecting Cisco Networking Devices, Part 1 (ICND1) v3.0 is a five-day, instructor-led training course that teaches learners
Networking 4 Voice and Video over IP (VVoIP)
Networking 4 Voice and Video over IP (VVoIP) Course Objectives This course will give delegates a good understanding of LANs, WANs and VVoIP (Voice and Video over IP). It is aimed at those who want to move
Integrating a Hitachi IP5000 Wireless IP Phone
November, 2007 Avaya Quick Edition Integrating a Hitachi IP5000 Wireless IP Phone This application note explains how to configure the Hitachi IP5000 wireless IP telephone to connect with Avaya Quick Edition
Burning Bridges - Routing Your Bridged WISP Network With MikroTik
Burning Bridges - Routing Your Bridged WISP Network With MikroTik Introduce Yourself Name Company & position there About Me Steve Discher 1987 graduate of Texas A&M University, in IT for more than 20 years
FAQs: MATRIX NAVAN CNX200. Q: How to configure port triggering?
FAQs: MATRIX NAVAN CNX200 Q: How to configure port triggering? Port triggering is a type of port forwarding where outbound traffic on predetermined ports sends inbound traffic to specific incoming ports.