Contents SCUOLA DI INGEGNERIA INDUSTRIALE E DELL INFORMAZIONE. Scuola di Ingegneria Industriale e dell Informazione Via La Masa, Milano

Transcription

1 SCUOLA DI INGEGNERIA INDUSTRIALE E DELL INFORMAZIONE Contents 1 Overview on the internal Double Degree in Mechanical and Management Study Programmes Which are the differences between the two programmes? Who can apply to the continuity programme? Who can apply to the open programme? The structure of the continuity programme Continuity programme for B.Sc. in Ingegneria Gestionale (Tracks: GPO propedeutico LM organizzazione and GPL propedutico LM logistica e produzione) Continuity programme for B.Sc. in Ingegneria Meccanica (Track: VA1 - Propedeutico) Continuity programme for B.Sc. in Ingegneria della Produzione Industriale (Track: PPM propedeutico ad indirizzo meccanico) Continuity programme for B.Sc. in Ingegneria della Produzione Industriale (Track: PPG propedeutico ad indirizzo gestionale) The structure of the open programme Open programme for enrolment in M.Sc. Mechanical Open programme for enrolment in M.Sc. Management Enrolment, etc Application Selection process The continuity programme Number of intakes Access requirements Selection criteria and rules Scuola di Ingegneria Industriale e dell Informazione Via La Masa, Milano Tel Partita Iva /5406 Fax Codice Fiscale presidenza3i@polimi.it

2 3.4 The open programme Number of intakes Access requirements Selection criteria and rules Contacts Overview on the internal Double Degree in Mechanical and Management The internal Double Degree in Mechanical and Management (idd-mme) aims to capture the emerging need of the Italian and European industrial and manufacturing sector, which is strategic and relevant for the economy. In particular, such sector, in order to compete within the international markets, is looking for a new professional figure able to integrate the typical skills of a management engineer with the key technical competencies of a mechanical engineer. Such objective could be reached by the cultural closeness of the two programmes, which present several commonalities, although showing specific differences that can, nonetheless, be easily compensated through a common programme. The focus of Mechanical programme is on the development of capabilities of designing products and processes, but management courses find limited place. The focus of Management programme is on providing different aspects of corporate, supply chain and operations management, also even beyond production activities, nonetheless with minor competencies on technological and design topics. The idd-mme offers a unique opportunity to take the major benefits from both the approaches, thus fulfilling the existing gaps in the two single programmes. The integration of Mechanical and Management programmes stems from such needs, thus aiming to develop a professional technician, with a solid industrial technical background, well matched with a managerial vision, thus being really appealing for the work market. 2. Study Programmes A total of 180 credits over three years should be awarded to obtain the idd-mme. Students have courses in excess with respect to the standard (Mechanical or Management) programme (120 credits over two years). The applicants have to enrol in the M.Sc. in Mechanical or in Management and to present a formally individual study programme (see Table 1). Actually, there are two pre-set and optional study programmes: 1) The continuity programme 2) The open programme

3 Table 1. Double Degree in Mechanical and Management (idd-mme). 2.1 Which are the differences between the two programmes? The continuity programme is actually tailored in order to propose a balanced programme, which draws a continuum path from some B.Sc. programmes of Politecnico di Milano to the double degree (see Table 2). The student does not have to adapt her/his preparation autonomously and all the minimum curriculum requirements are already included in the continuity programme, by means of a suitable set of mandatory grounding courses. The language of this programme is English, except some courses during the first year of the programme. The open programme is designed for students with any kind of B.Sc. degree in. No grounding courses are included and the students are expected to adapt their own preparation autonomously, in order to have the minimum curriculum requirements. The language of the programme is English.

4 Table 2. Study programmes 2.2 Who can apply to the continuity programme? Only the students of Politecnico di Milano who are attending the 3 rd year of the B.Sc. or hold a B.Sc. degree in the programmes (see Table 2). a) Ingegneria Gestionale (Tracks: GPO propedeutico LM organizzazione and GPL propedutico LM logistica e produzione) b) Ingegneria Meccanica (Track: VA1 - Propedeutico) c) Ingegneria della produzione industriale (Tracks: PPM propedeutico ad indirizzo meccanico and PPG propedeutico ad indirizzo gestionale) 2.3 Who can apply to the open programme? All the students (of Politecnico di Milano or of any other university) who hold a B.Sc. degree in (see Table 2). They have to enroll either to the M.Sc. Mechanical or to the M.Sc. Management (see section 2.5). 2.4 The structure of the continuity programme The general structure of the continuity programme is shown in Table 3. The applicants have to enrol in the M.Sc. in Mechanical or in Management. Independently from the B.Sc. degree, the student has to attend: i) a set of grounding courses; ii) two sets of courses that provide the basics for Mechanical and Management respectively; iii) to some courses of selected tracks from M.Sc. in Mechanical and in Management. Beyond the courses, the student has to prepare and discuss a master thesis.

5 Table 3. Structure of the continuity programme From: B.Sc. in Ingegneria Gestionale Tracks: GPO propedeutico LM organizzazione and GPL propedutico LM logistica e produzione (Politecnico di Milano) B.Sc. in Ingegneria Meccanica Track: VA1 Propedeutico (Politecnico di Milano) B.Sc. Ingegneria della Produzione Industriale Tracks: PPM propedeutico ad indirizzo meccanico and PPG propedeutico ad indirizzo gestionale (Politecnico di Milano) Grounding courses (CFU) Courses from M.Sc. in Mechanical (CFU) Courses from M.Sc. in Management (CFU) Courses from selected tracks from M.Sc. in Mechanical and in Management (CFU) Master thesis (CFU) Total before track and thesis (CFU) Total (CFU) Continuity programme for B.Sc. in Ingegneria Gestionale (Tracks: GPO propedeutico LM organizzazione and GPL propedutico LM logistica e produzione) The structure of the Continuity programme for B.Sc. in Ingegneria Gestionale (Tracks: GPO propedeutico LM organizzazione and GPL propedutico LM logistica e produzione) is detailed in Table 4. The courses from selected tracks from M.Sc. in Mechanical and in Management are reported respectively in Table 5 and Table 6.

6 Table 1. Continuity programme for B.Sc. in Ingegneria Gestionale (Tracks: GPO propedeutico LM organizzazione and GPL propedutico LM logistica e produzione) MNG Code SSD Course title Language Sem Credits (CFU) CFU Group Note Grounding for Polimi B.Sc. in Management Students Courses from M.Sc. in Mechanical ING-IND/14 COSTRUZIONE DI MACCHINE ING-IND/17 GESTIONE DEGLI IMPIANTI INDUSTRIALI ING-IND/21 METALLURGIA E MATERIALI NON METALLICI ING-IND/12 MISURE MECCANICHE E TERMICHE N/A ING-IND/13 ING-IND/15 ING-IND/13 ING-IND/32 ING-INF/04 MACHINE DESIGN AND FUNDAMENTALS OF APPLIED MECHANICS 2 CONTROL AND ACTUATING DEVICES FOR MECHANICAL SYSTEMS TBD ING-IND/16 ADVANCED MANUFACTURING PROCESSES ING-IND/14 MACHINE DESIGN ING-IND/17 ASSET LIFECYCLE MANAGEMENT 2 10 N/A ING-IND/17 INDUSTRIAL PROJECT MANAGEMENT A ING-IND/15 LABORATORIO PROGETTUALE CAD 2 7 LABORATORIO PROGETTUALE DI CALCOLO ING-IND/14 STRUTTURALE ING-IND/13 MECCANICA DELLE VIBRAZIONI Course must be selected if i) the student did not have course "Scienza delle costruzioni" in her/his B.Sc. study plan TOTAL 37 CFU TOTAL Courses from M.Sc. in Management ING-IND/35 ACCOUNTING FINANCE & CONTROL ING-IND/35 STRATEGY & MARKETING ING-IND/35 LEADERSHIP & INNOVATION ING-IND/17 INDUSTRIAL TECHNOLOGIES 1 or ING-IND/17 LOGISTICS MANAGEMENT 1 or ING-IND/17 OPERATIONS MANAGEMENT 1 or 2 10 TOTAL 40 Select courses from either one track from the following group Courses from tracks of M.Sc. in Mechanical Courses from tracks of M.Sc. in Managment ME1 - PRODUCTION PLANTS ME2 - MECHATRONICS AND ROBOTICS ME3 - VIRTUAL PROTOTYPING ME5 - ADVANCED MECHANICAL DESIGN ME6 - ADVANCED MATERIALS AND TECHNOLOGIES ME7 - GROUND VEHICLES TOTAL or from the following one. AM - ADVANCED MANUFACTURING IM - INDUSTRIAL MANAGEMENT OSI - SUSTAINABLE OPERATIONS AND SOCIAL INNOVATION 30 SCM - SUPPLY CHAIN MANAGEMENT EEM - ENERGY AND ENVIRONMENTAL MANAGEMENT DMI - DESIGN MANAGEMENT, INNOVATION & ENTREPRENEURSHIP TOTAL 30 Master Thesis 25-30

7 Table 5. Courses from selected tracks from M.SC. in Mechanical CFU Track ME1 - PRODUCTION PLANTS ME2 - MECHATRONICS AND ROBOTICS ME3 - VIRTUAL PROTOTYPING ME5 - ADVANCED MECHANICAL DESIGN Courses INDUSTRIAL PLANTS A (10); DESIGN AND ANALYSIS OF EXPERIMENTS A (8); Choose 1 course of 10 CFU from both groups of 10 CFU courses of the track (10); MECHATRONIC SYSTEMS AND LABORATORY A (10); AUTOMATIC CONTROL A (10); Choose 1 course of 6 CFU from both groups of 6 CFU courses of the track (6+6); VIRTUAL PROTOTYPING (10); MODELLING OF MECHANICAL BEHAVIOUR OF MATERIALS A (10); Choose 1 course of 6 CFU from both groups of 6 CFU courses of the track (6+6); METHODS FOR ADVANCED MECHANICAL DESIGN (10); METHODS AND TOOLS FOR SYSTEMATIC INNOVATION (10); Choose 1 course of 6 CFU from both groups of 6 CFU courses of the track (6+6); IRONMAKING AND STEELMAKING (10); ME6 - ADVANCED MATERIALS AND TECHNOLOGIES DESIGN AND ANALYSIS OF EXPERIMENTS A (10); Choose 1 course of 6 CFU from both groups of 6 CFU courses of the track (6+6); ME7 - GROUND VEHICLES GROUND VEHICLE ENGINEERING A (10); VEHICLE DYNAMICS AND CONTROL A (10); Choose 1 course of 6 CFU from both groups of 6 CFU courses of the track (6+6); Note: refer to the educational rules document of M.Sc. in Mechanical ( g=en ) for the optional courses. Table 6. Courses from selected tracks from M.SC. In Management CFU 30 Track AM - ADVANCED MANUFACTURING IM - INDUSTRIAL MANAGEMENT OSI - SUSTAINABLE OPERATIONS AND SOCIAL INNOVATION SCM - SUPPLY CHAIN MANAGEMENT EEM - ENERGY AND ENVIRONMENTAL MANAGEMENT DMI - DESIGN MANAGEMENT, INNOVATION & ENTREPRENEURSHIP Production for Made in Italy Lab (10); Manufacturing Systems (10); Manufacturing Systems Planning (10); Courses Industrial Management LAB and Toolbox (15) Choose either Asset Life Cycle Management (10) or Industrial Project Management A (10); Choose either Operations Risk Management and Resilience (5) or Quality Management (5); Business in Transformation: Social and Sustainability Challenges LAB (15); Advanced and Sustainable Manufacturing (10); Social Innovation (5) Supplier Relationship Management Lab (10); Advanced Supply Chain Planning Lab (10); Supply Chain Management (10) Energy Management Lab (10); Management of Energy and Sustainability (10); Economics of Network Industries (5); Industrial Eco-efficiency (5); Design Management Lab (15); Design Strategy and Economics of Innovation (10); Choose either Additive Manufacturing (5) or Digital Business Innovation (5) or Entrepreneurship Economics and policy (5) or Management of Design and Innovation Projects (5) or Product Life Cycle Management (5) Note: refer to the educational rules document of M.Sc. in Management ( g=en) for the optional courses.

8 2.4.2 Continuity programme for B.Sc. in Ingegneria Meccanica (Track: VA1 - Propedeutico) The structure of the Continuity programme for B.Sc. in Ingegneria Meccanica (Track: VA1 - Propedeutico) is detailed in Table 7. The courses from selected tracks from M.Sc. in Mechanical and in Management are reported respectively in Table 5 and table 6.

9 Table 7. Continuity programme for B.Sc in Ingegneria Meccanica (Track: VA1 Propedeutico) MECH Code SSD Course title Language Sem Credits (CFU) CFU Group Note Grounding for Polimi B.Sc. in Mechanical Students SECS-P/01 ECONOMIA ING-IND/35 GESTIONE AZIENDALE A ING-IND/17 GESTIONE DEI SISTEMI LOGISTICI PRODUTTIVI TOTAL 30 Courses from M.Sc. in Mechanical ING-IND/13 ING-IND/32 ING-INF/04 CONTROL AND ACTUATING DEVICES FOR MECHANICAL SYSTEMS ING-IND/21 APPLIED METALLURGY ING-IND/14 MACHINE DESIGN ING-IND/13 MECHANICAL SYSTEM DYNAMICS ING-IND/12 MEASUREMENTS TOTAL Courses from M.Sc. in Management ING-IND/35 ACCOUNTING FINANCE & CONTROL ING-IND/35 STRATEGY & MARKETING ING-IND/35 LEADERSHIP & INNOVATION ING-IND/17 INDUSTRIAL TECHNOLOGIES 1 or ING-IND/17 LOGISTICS MANAGEMENT 1 or ING-IND/17 OPERATIONS MANAGEMENT 1 or ING-IND/16 QUALITY ENGINEERING ING-IND/16 MANUFACTURING SYSTEMS ENGINEERING 2 10 Select courses from either one track from the following group Course must be selected if track AM - Advanced Manufacturing is chosen TOTAL 60 Courses from tracks of M.Sc. in Mechanical Courses from tracks of M.Sc. in Managment ME1 - PRODUCTION PLANTS ME2 - MECHATRONICS AND ROBOTICS ME3 - VIRTUAL PROTOTYPING ME5 - ADVANCED MECHANICAL DESIGN ME6 - ADVANCED MATERIALS AND TECHNOLOGIES ME7 - GROUND VEHICLES TOTAL or from the following one. AM - ADVANCED MANUFACTURING IM - INDUSTRIAL MANAGEMENT OSI - SUSTAINABLE OPERATIONS AND SOCIAL INNOVATION 30 SCM - SUPPLY CHAIN MANAGEMENT EEM - ENERGY AND ENVIRONMENTAL MANAGEMENT DMI - DESIGN MANAGEMENT, INNOVATION & ENTREPRENEURSHIP TOTAL 30 Master Thesis 23-27

10 2.4.3 Continuity programme for B.Sc. in Ingegneria della Produzione Industriale (Track: PPM propedeutico ad indirizzo meccanico) The structure of the Continuity programme for B.Sc. in B.Sc. in Ingegneria della Produzione Industriale (Track: PPM propedeutico ad indirizzo meccanico) is detailed in Table 8. The courses from selected tracks from M.Sc. in Mechanical and in Management are reported respectively in Table 5 and table 6.

11 Table 8:. Continuity programme for B.Sc in Ing. della Produzione Industriale (Track: PPM- propedeutico ad indirizzo meccanico) IPI-PPM Code SSD Course title Language Sem Credits (CFU) CFU Group Note Grounding for Polimi B.Sc. in Industrial Production - track PPM Students Courses from M.Sc. in Mechanical Courses from M.Sc. in Management Courses from tracks of M.Sc. in Mechanical Courses from tracks of M.Sc. in Managment ING-INF/04 FONDAMENTI DI AUTOMATICA ING-IND/35 GESTIONE AZIENDALE A SECS-P/01 ECONOMIA ING-IND/13 ING-IND/32 ING-INF/ ING-IND/21 APPLIED METALLURGY ING-IND/14 MACHINE DESIGN ING-IND/13 MECHANICAL SYSTEM DYNAMICS TOTAL ING-IND/12 MEASUREMENTS TOTAL ING-IND/35 ACCOUNTING FINANCE & CONTROL ING-IND/35 STRATEGY & MARKETING ING-IND/35 LEADERSHIP & INNOVATION ING-IND/17 INDUSTRIAL TECHNOLOGIES 1 or ING-IND/17 LOGISTICS MANAGEMENT 1 or ING-IND/17 OPERATIONS MANAGEMENT 1 or ING-IND/16 QUALITY ENGINEERING 2 10 MANUFACTURING SYSTEMS ING-IND/ ENGINEERING ME1 - PRODUCTION PLANTS CONTROL AND ACTUATING DEVICES FOR MECHANICAL SYSTEMS ME2 - MECHATRONICS AND ROBOTICS ME3 - VIRTUAL PROTOTYPING ME5 - ADVANCED MECHANICAL DESIGN ME6 - ADVANCED MATERIALS AND TECHNOLOGIES Course must be selected if track AM - Advanced Manufacturing is chosen TOTAL 60 ME7 - GROUND VEHICLES TOTAL AM - ADVANCED MANUFACTURING IM - INDUSTRIAL MANAGEMENT OSI - SUSTAINABLE OPERATIONS AND SOCIAL INNOVATION SCM - SUPPLY CHAIN MANAGEMENT EEM - ENERGY AND ENVIRONMENTAL MANAGEMENT or from the following one Select courses from either one track from the following group DMI - DESIGN MANAGEMENT, INNOVATION & ENTREPRENEURSHIP TOTAL Master Thesis 23-27

12 2.4.4 Continuity programme for B.Sc. in Ingegneria della Produzione Industriale (Track: PPG propedeutico ad indirizzo gestionale) The structure of the Continuity programme for B.Sc. in B.Sc. in Ingegneria della Produzione Industriale (Track: PPG propedeutico ad indirizzo gestionale) is detailed in Table 9. The courses from selected tracks from M.Sc. in Mechanical and in Management are reported respectively in Table 5 and Table 6.

13 Table 9. Continuity programme for B.Sc in Ing, della Produzione Industriale (Track: PPG propedeutico ad indirizzo gestionale) IPI-PPG Code SSD Course title Language Sem Credits (CFU) CFU Group Note Grounding for Polimi B.Sc. in Industrial Production - track PPG Students ING-IND/13 MECCANICA DELLE VIBRAZIONI ICAR/08 ING-IND/14 METODI DI CALCOLO DELLE STRUTTURE LABORATORIO PROGETTUALE DI CALCOLO STRUTTURALE SECS-P/01 ECONOMIA TOTAL 28 Courses from M.Sc. in Mechanical ING-IND/13 ING-IND/32 ING-INF/04 CONTROL AND ACTUATING DEVICES FOR MECHANICAL SYSTEMS ING-IND/21 APPLIED METALLURGY ING-IND/14 MACHINE DESIGN ING-IND/13 MECHANICAL SYSTEM DYNAMICS ING-IND/12 MEASUREMENTS TOTAL 35 Courses from M.Sc. in Management ING-IND/35 ACCOUNTING FINANCE & CONTROL ING-IND/35 STRATEGY & MARKETING ING-IND/35 LEADERSHIP & INNOVATION ING-IND/17 INDUSTRIAL TECHNOLOGIES 1 or ING-IND/17 LOGISTICS MANAGEMENT 1 or ING-IND/17 OPERATIONS MANAGEMENT 1 or ING-IND/16 QUALITY ENGINEERING ING-IND/16 MANUFACTURING SYSTEMS ENGINEERING 2 10 Select courses from either one track from the following group Course must be selected if track AM - Advanced Manufacturing is chosen TOTAL 60 Courses from tracks of M.Sc. in Mechanical Courses from tracks of M.Sc. in Managment ME1 - PRODUCTION PLANTS ME2 - MECHATRONICS AND ROBOTICS ME3 - VIRTUAL PROTOTYPING ME5 - ADVANCED MECHANICAL DESIGN ME6 - ADVANCED MATERIALS AND TECHNOLOGIES ME7 - GROUND VEHICLES TOTAL or from the following one. AM - ADVANCED MANUFACTURING IM - INDUSTRIAL MANAGEMENT OSI - SUSTAINABLE OPERATIONS AND SOCIAL INNOVATION 30 SCM - SUPPLY CHAIN MANAGEMENT EEM - ENERGY AND ENVIRONMENTAL MANAGEMENT DMI - DESIGN MANAGEMENT, INNOVATION & ENTREPRENEURSHIP TOTAL 30 Master Thesis 25-29

14 2.5 The structure of the open programme The general structure of the open programme is shown in Table 10. Table 10. Structure of the open programme. From any B.Sc. Enrolment in M.Sc. in : Mechanical First year 62 CFU in Mechanical engineering (First year courses, track NDE) Second year 10 CFU in BUSINESS AND INDUSTRIAL ECONOMICS + 50 CFU in Management engineering (*) (**) (from the First year courses, tracks AM, IM, OSI, SCM, EEM, DMI) Third year Master thesis Enrolment in M.Sc. Management 60 CFU in Management engineering (First year courses, tracks AM, IM, OSI, SCM, EEM, DMI) 62 CFU in Mechanical engineering (***) (First year courses, track NDE) CFU from either Mechanical engineering, second year courses, tracks: ME1, ME2, ME3, ME5, ME6, ME7( ) or from Management engineering, second year courses, tracks: AM, IM, OSI, SCM, EEM, DMI( ) CFU CFU Total (CFU) (*) It is not allowed to choose the courses of INDUSTRIAL TECHNOLOGIES, and OPERATIONS MANAGEMENT, coming from the M.Sc. in Mechanical. (**) The choice of the 50 CFU in Management engineering from the first year courses, tracks AM, IM, OSI, SCM, EEM, DMI is contrained to the selection of at least 20 CFU form ING-IND/35 courses and at least 20 CFU form ING-IND/17 courses. (***) It is not allowed to choose the course of DESIGN AND MANAGEMENT OF PRODUCTION SYSTEMS, if the courses of INDUSTRIAL TECHNOLOGIES, and OPERATIONS MANAGEMENT have been previously taken. In case, it is substituted by N/A-MACHINE DESIGN AND FUNDAMENTALS OF APPLIED MECHANICS, coming from the M.Sc. in Management. ( ) Table 5 ( ) Table 6

15 The applicants have to be already enrolled in the M.Sc. in Mechanical or in the M.Sc. in Management. The selection process for the enrolment in idd- MME takes place during the first year of the M.Sc. in Mechanical or in the M.Sc. in Management programme. The enrolment in idd-mme takes place before the beginning of the second year (i.e., the intake in the idd-mme is actually a shift, at the beginning of the second year, from the original programme to idd-mme). Depending on the selected M.Sc., they have to choose courses from different tracks, but no grounding courses are proposed and the students are expected to recover any knowledge gap with respect to skills and competences related to the content of the courses of the first year (for both Mechanical and Management ) Open programme for enrolment in M.Sc. Mechanical Please refer to: The educational rules document of M.Sc. in Mechanical ( opublic.do?jaf_currentwfid=main&evn_default=evento&k_corso_la=483 &aa=2015&lang=en), The educational rules document of M.Sc. in Management ( opublic.do?jaf_currentwfid=main&evn_default=evento&k_corso_la=479 &aa=2015&lang=en), for the details about the tracks and for the selection of the optional courses. It is not allowed to choose the courses of INDUSTRIAL TECHNOLOGIES, and OPERATIONS MANAGEMENT Open programme for enrolment in M.Sc. Management Please refer to: The educational rules document of M.Sc. in Mechanical ( opublic.do?jaf_currentwfid=main&evn_default=evento&k_corso_la=483 &aa=2015&lang=en), The educational rules document of M.Sc. in Management ( opublic.do?jaf_currentwfid=main&evn_default=evento&k_corso_la=479 &aa=2015&lang=en), for the details about the tracks and for the selection of the optional courses. It is not allowed to choose the course of DESIGN AND MANAGEMENT OF PRODUCTION SYSTEMS, if the courses of INDUSTRIAL TECHNOLOGIES, and OPERATIONS MANAGEMENT have been previously taken. In case, it is substituted by N/A-MACHINE DESIGN AND FUNDAMENTALS OF APPLIED MECHANICS.

16 3. Enrolment, etc. 3.1 Application The application should be sent by to: The subject should be: Application for Internal Double Degree in Management & Mechanical The following information should be provided in the attached documents: Motivation letter Final mark in the Bachelor Degree (when available) Curriculum Studiorum in the Bachelor (including exams transcripts and abstract of the thesis; when available ) and in the Master of Science (exams transcripts; when available) Programmes Curriculum Vitae with clear indication of other competencies developed (beside the curriculum studiorum) and how they were developed, professional experiences, and hobbies 3.2 Selection process Evaluation is based on a two-stage process: screening and colloquium. Only students that pass the screening stage will access to the colloquium. Screening is based on: A motivation letter, explaining the reason why the candidate is willing to attend the idd-mme Programme and how she/he may contribute to the community of the Programme. Final mark in the Bachelor Degree (when available and required). Curriculum Studiorum in the Bachelor (exams transcripts and abstract of the thesis) and in the Master of Science (exams transcripts; when available and required) Programmes. Curriculum Vitae with clear indication of other competencies developed (beside the curriculum studiorum) and how they were developed, professional experiences, and hobbies. Colloquium is aimed to evaluate: The coherence of the expectations and the motivations of the candidate with the objective of the idd-mme programme. The coherence of the specific competencies acquired by the candidate in the Bachelor and Master of Science (if any) level and through extra-curricular experiences with the objective of the idd-mme programme. Candidate s attitude towards the disciplines of the idd-mme programme (which could be assessed through interview questions or a case study). The key steps of the selection process will be: Submission of the applications (by the candidate)

17 Notification of the results of the screening stage (on the School site s) Colloquium with the candidates Notification of the list of the admitted and eligible (but not admitted yet) candidates (on the School site s) Confirmation of intention to proceed with the double degree (by the candidate) Notification of the replacing candidates (on the School site s) Depending on the idd-mme programme chosen (i.e. continuity or open ), the access requirements, the number of intakes, the selection criteria and rules can vary (ref. to section 3.3 and 3.4). The selection is held in the period foreseen by the academic calendar at a date to be published in the notices of the Website of the School of Industrial and Information ( 3.3 The continuity programme Number of intakes The number of intakes is 2 per academic year. Approximatively: - the first one takes place by the end of the second semester, whilst - the second one takes place by the end of the first semester. The date will be published in the notices of the Website of the School of Industrial and Information ( The number of positions available for each intake is Access requirements Only the students of Politecnico di Milano who are attending the 3 rd year of the B.Sc. or hold a B.Sc. degree in the programmes (see Table 2): a) Ingegneria Gestionale b) Ingegneria Meccanica (Track: VA1 - Propedeutico) c) Ingegneria della produzione industriale (Tracks: PPM propedeutico ad indirizzo meccanico and PPG propedeutico ad indirizzo gestionale) can access to the continuity program. For the students of Politecnico di Milano who are attending the 3 rd year of the B.Sc. a), b) and c) previously mentioned, access criteria are based on previous career evaluation and adequacy of personal preparation; thus, the following three thresholds have to be contemporary overcome: 1) The weighted average of scores obtained in the Bachelor of Science has to be equal or higher than (>=) 24,5/30. 2) No more than (<=) 40 credits missing to obtain the Bachelor of Science degree. 3) The Curriculum Studiorum in the Bachelor of Science had to be no longer than 4 years (<=). For the students of Politecnico di Milano who hold a B.Sc. degree in the programmes a), b) and c) previously mentioned, access criteria are based on previous career evaluation

18 and adequacy of personal preparation; thus, the following three thresholds have to be contemporary overcome: 1) The weighted average of scores obtained in the Master of Science has to be equal or higher than (>0) 24,5/30. 2) No more than (<=) 40 credits missing to fulfil the requirements of the first year of the Master of Science degree. 3) The final grade obtained the Bachelor of Science degree has to be equal or higher (>=) than 95/110. 4) The Curriculum Studiorum in the Bachelor of Science had to be no longer than 4 years (<=) Selection criteria and rules In each intake, the applicants will be graded on a basis of a weighted score (S) and listed. For the students of Politecnico di Milano who are attending the 3 rd year of the B.Sc. a), b) and c) previously mentioned in section 3.3.2, S is composed by 2 determinants with a different weight: - A (weight = 80%) = the adjusted weighted average of scores obtained in the Bachelor of Science; i.e. weighted average of scores obtained in the Bachelor of Science decreased by the number of credits still missing to obtain the Bachelor of Science degree multiplied by 0,2. - B (weight = 20%) = the grade obtained by the Commission on the basis of the colloquium (on a 30 point scale). In any case, if B is lower than (<) 18, the candidate is excluded; and S is set equal to 0. For the students of Politecnico di Milano who hold a B.Sc. degree in the programmes a), b) and c) previously mentioned in section 3.3.2, S is composed by 3 determinants with a different weight: - A (weight = 60%) = the adjusted weighted average of scores obtained in the Master of Science; i.e. weighted average of scores obtained in the Master of Science decreased by the number of credits still missing to fulfil the requirements of the first year of the Master of Science degree multiplied by 0,2. - B (weight = 20%) = the final grade obtained the Bachelor of Science degree (translated into a 30 point scale). - C (weight = 20%) = the grade obtained by the Commission on the basis of the colloquium (on a 30 point scale). In any case, if C is lower than (<) 18 the candidate is excluded; and S is set equal to 0. The graded applicants are listed in decreasing order of S. The first 10 are considered admitted; the others with S>0 are considered eligible (always in order of S). The ones with S=0 are considered ineligible. When an admitted applicant does not confirm the intention to proceed with the double degree to School by the communicated time, he/she is excluded and the first eligible

19 applicant takes his/her position. Only eligible applicants can be admitted in case of abandonment. 3.4 The open programme Number of intakes The number of intakes is 2 per academic year. Approximatively: - the first one takes place by the end of the second semester, whilst - the second one takes place by the end of the first semester. The date will be published in the notices of the Website of the School of Industrial and Information ( The number of positions available for each intake is Access requirements All the students (of Politecnico di Milano or of any other university) who are attending the M.Sc. Mechanical or the M.Sc. Management can access to the open program. Access criteria are based on previous career evaluation and adequacy of personal preparation; thus, the following three thresholds have to be contemporary overcome: 1) The weighted average of scores obtained in the Master of Science has to be equal or higher than (>0) 24,5/30. 2) No more than (<=) 40 credits missing to fulfil the requirements of the first year of the Master of Science degree. 3) The final grade obtained the Bachelor of Science degree has to be equal or higher (>=) than 95/110. 4) The Curriculum Studiorum in the Bachelor of Science had to be no longer than 4 years (<=) Selection criteria and rules In the intake, the applicants will be graded on a basis of a weighted score (S) and listed. S is composed by 3 determinants with a different weight: - A (weight = 60%) = the adjusted weighted average of scores obtained in the Master of Science; i.e. weighted average of scores obtained in the Master of Science decreased by the number of credits still missing to fulfil the requirements of the first year of the Master of Science degree multiplied by 0,2. - B (weight = 20%) = the final grade obtained the Bachelor of Science degree (translated into a 30 point scale). - C (weight = 20%) = the grade obtained by the Commission on the basis of the colloquium (on a 30 point scale). In any case, if C is lower than (<) 18 the candidate is excluded; and S is set equal to 0. The graded applicants are listed in decreasing order of S. The first 10 are considered admitted; the others with S>0 are considered eligible (always in order of S). The ones with S=0 are considered ineligible.

20 When an admitted applicant does not confirm the intention to proceed with the double degree to School by the communicated time, he/she is excluded and the first eligible applicant takes his/her position. Only eligible applicants can be admitted in case of abandonment. Contacts Supervisor for M.Sc. in Mechanical : Prof. Paolo Pennacchi (paolo.pennacchi@polimi.it) Supervisor for M.Sc. in Management : Prof. Enrico Cagno (enrico.cagno@polimi.it). General information: management-engineering@polimi.it;