YM.SW.105.UM.EN.D00REV FH11 Fri Jul 25 16:00: Page 1

Transcription

1 YM.SW.105.UM.EN.D00REV FH11 Fri Jul 25 16:00: Page 1 5 port 10/100 Mbps Ethernet Switch USER MANUEL

2 YM.SW.105.UM.EN.D00REV FH11 Fri Jul 25 16:00: Page 2 This manual has been prepared by AirTies Wireless Networks Corporation. All rights reserved. Manual Overview This manual guides you through the steps necessary for setting up and configuring your AirTies device. Please read this manual carefully before beginning the installation process. The Warranty does not cover failure or damage as a result of not following the instructions in the manual. AirTies will not be held responsible in such circumstances. The User Manual is an important resource you can refer to for safe and proper use of your device. Please retain it for future reference. Safety and Maintenance In order to prevent damage to your device, be sure to keep it in its original box during transportation. The device must be used solely with its original power adapter. Do not connect the LAN port to a PSTN phone jack. If you encounter any problems, do not open or disassemble the device. Call AirTies Technical Support. In order to prevent electric shock, do not operate the device in wet or damp areas. In the event of a gas leak, do not use the device. Do not turn the device on or off. Do not plug or unplug the power cord. Avoid using the device in dusty environments. If dust buildup should occur, use a dry cloth to remove the dust. To clean the exterior of the device use a dry cloth. Do not attempt to clean the interior. There are no user serviceable components inside. For information regarding the installation and configuration of the device consult the remainder of this manual. The average usage life of the device is 7 years as determined by the Authority of Industry and Trade.

3 YM.SW.105.UM.EN.D00REV FH11 Fri Jul 25 16:00: Page 3 " Table of Contents 1. INTRODUCTION Main Features Minimum System Requirements Package Contents INSTALLATION Basic Cabling Procedure Front Panel Back Panel Technical Specifications Physical Characteristics...7 Declaration of Conformity...8

4 YM.SW.105.UM.EN.D00REV FH11 Fri Jul 25 16:00: Page 4 1. INTRODUCTION AAirTies 5 Port 10/100 Mbps Ethernet Switch provides a fast and practical networking solution anywhere. The is a high performance, easy-to-use switch especially for environments where there are a large number of users and heavy network traffic. With the, you can expand your network easily without having to change anything in the existing infrastructure. A perfect solution for corporate networks with its 100 Mbps Ethernet speed, the allows you to expand your network to include as many Ethernet compatible devices (computers, network printers, IP Cameras, etc.) as you want without needing to reconfigure them. Just connect and turn them on. Ethernet Printer Ethernet Printer 5-Port Fast Ethertnet Switch 100Link/ACT 10Link/ACT Power Link/ACT 10Link/ACT Power Port Fast Ethertnet Switch Internet RT-205 AirTies User Manuel 1

5 YM.SW.105.UM.EN.D00REV FH11 Fri Jul 25 16:00: Page Main Features Auto MDI/MDI-X feature automatically detects the connection type of the remote device and adjusts itself to work seamlessly without user intervention. Store and Forward feature ensures data integrity on your network, prevents packet loss and delay. Full- / Half-Duplex operating modes provide automatic speed configuration based on the speed (100Mbps or 10 Mbps) supported by the connected device. Back-Pressure support for Half-Duplex mode provides increased performance for even 10 Mbps connections. Uplink from any port LED indicators: Power indicator and Link/Act indicators that also show transmission speed (Green for 100 Mbps, Orange for 10 Mbps). Robust against voltage fluctuations: Designed and developed to withstand wide voltage fluctuations. 7 /24 AirTies Call Center and Technical Support (and support by the AirTies R&D team when necessary) 3-year extended warranty 2 AirTies User Manuel

6 YM.SW.105.UM.EN.D00REV FH11 Fri Jul 25 16:00: Page Minimum System Requirements A computer with an Ethernet card and running any version of Windows, UNIX, Linux, or Mac operating systems Package Contents The following items are included in the AirTies Ethernet Switch box: 1.AirTies 5 Port 10/100 Ethernet Switch 2.Power adapter 3.User Manual AirTies User Manuel 3

7 YM.SW.105.UM.EN.D00REV FH11 Fri Jul 25 16:00: Page 7 2. INSTALLATION 2.1. Basic Cabling Procedure You can make the hardware connections of your switch as shown in the diagram below: 1.Connect the power adapter cable to the switch. Plug the power adapter into the wall outlet. Turn the device on. 2.Connect the Ethernet compatible network devices to the LAN ports of your choice. 7.5V 1A Power RT-205 Ethernet Printer NOTE: The AirTies Switch does not require any setup or configuration after making the hardware connections. All settings valid for the network are also valid for the devices connected to the. You do not need any special settings for the network devices connected to the. 4 AirTies User Manuel

8 YM.SW.105.UM.EN.D00REV FH11 Fri Jul 25 16:00: Page 8 3. FRONT PANEL Power Port Fast Ethertnet Switch 100Link/ACT 10Link/ACT L E D LIGHT STATUS Power Green OFF The AirTies switch is ON. The AirTies switch is OFF. Link/Act 1- Link/Act 5 Green Green Flashing Orange Orange Flashing OFF 100 Mbps LAN connection is established and active. 100 Mbps LAN connection is active and data exchange is taking place. 10 Mbps LAN connection is established and active. 10 Mbps LAN connection is active and data exchange is taking place. No LAN connection. AirTies User Manuel 5

9 YM.SW.105.UM.EN.D00REV FH11 Fri Jul 25 16:00: Page 9 4. BACK PANEL 7.5V 1A NO INTERFACE DESCRIPTION 1 POWER 7.5V power port. Connected to the power adapter. 2 LAN 1- LAN 5 Ethernet ports. 6 AirTies User Manuel

10 YM.SW.105.UM.EN.D00REV FH11 Fri Jul 25 16:00: Page 10 5 Technical Specifications Connection Standards: IEEE Base-T, IEEE 802.3u 100Base-T, Auto-Negotiation feature; 10/100 Mbps operation, Full/Half Duplex operation, Flow Control for Full-Duplex operation, Back-Pressure support for Half-Duplex operation, Auto MDI/MDI-X Topology: Star Transmission Method: Store and Forward Interfaces: 10 BASE-T: Twisted-Pair UTP/STP CAT. 3,4,5 or higher 100 BASE-T: Twisted-Pair UTP/STP CAT. 5 or higher Standards: CE 6. Physical Characteristics Dimensions: 150mm x 110mm x 35mm Weight: : 220 gr Power: 7.5V/1A(AC-DC) Operating Temperature: 0 C ~ 40 C Storage Temperature: -10 C ~ 70 C Humidity: %5 - %90 non-condensing AirTies User Manuel 7

11 YM.SW.105.UM.EN.D00REV FH11 Fri Jul 25 16:00: Page 11 Wireless Access Point EN 55022:2006 EN :2006 EN :1995+A1:2001+A2:2005 EN 55024:1998+A1:2001+A2:2003 IEC Edition 1.2: IEC :2002+A1:2002 IEC :2004 IEC Edition 1.1: IEC Edition 2.1: IEC Second Edition: AirTies User Manuel

12 YM.SW.105.UM.EN.D00REV FH11 Fri Jul 25 16:00: Page 12 YM.SW.105.UM.EN.D00REV