Curriculum Vitae. College of Engineering and Islamic Architecture

Transcription

1 Curriculum Vitae Name Address Anis Ammous College of Engineering and Islamic Architecture Umm Al-Qura University Department of Electrical Engineering Marital Status Married Mobile: (966) Summary I have obtained the degree of Electrical Engineering (as major) from engineering school of Sfax-Tunisia (ENIS) in I continued my research study in France where I have obtained M.Sc (as major) and PH.D (with honors) degrees in Power Electronics in 1995 and 1998 respectively. Between 1997 and 1998 I was a contractual teacher-researcher at Claude Bernard University (UCBL)-Lyon-France. From 1999 to 2003 I has been an assistant Professor with ENIS where I taught courses in the area of Power Electronics and Energy Conversion Systems. In 2003 I have received the Research Management Ability degree and I was an associate Professor with ENIS. My research interests are power semiconductor devices modeling, Renewable Energy systems modeling and design, Electrothermal and EMC-EMI phenomena modeling in power systems.. Since 2008, I m a professor with ENIS and the head of the research group (Power Electronics Group). In January and February 2011, I was a visitor professor with the INSA-Lyon University in France. I m the author of two patents related to Photovoltaic system use, many books for electrical engineering students in Power Electronics Area and More than 30 papers in journals and 40 publications in conferences. In addition I have supervised an important number of PH.D, M.Sc and research projects. Education * 2003 Habilitation (Research Management Ability in the French System): Electrical Engineering: National Engineering School of Sfax (ENIS)-Tunisia, Thesis Title: " Electrothermal Modelling of Energy Converters: Integration tools * 1998 Ph.D. Electrical Engineering,: National Institute of application sciences (INSA) in Lyon, France. Thesis Title: "Electrothermal Modelling of IGBT s: Short circuit application ". * 1995 M.Sc. Electrical Engineering at the INPT (Institut National Polytechnique de Toulouse, France). Thesis Title: "Current Control of a Doubly Fed Machine". * 1994 Engineering degree: Electrical engineer ENIS- Sfax-Tunisia. 1

2 Work Experience Career History: Since September Full Professor of electrical engineering. College of Engineering and Islamic Architecture Umm Al-Qura University Full Professor of electrical engineering /Power Electronics (Renewable Energy, Power converters, Power Semiconductor devices ) at National School of Engineers (ENIS)- Sfax University-Tunisia Associate Professor at National School of Engineers (ENIS)-Sfax University-Tunisia. Electrical Engineering / Power Electronics Assistant Professor at National School of Engineers (ENIS)-Sfax University-Tunisia. Electrical Engineering / Power Electronics Contractual teacher-researcher : Claude Bernard University (UCBL)-Lyon-France. Electrical Engineering. Thesis Supervision Between * Supervision of 65 Final year project (engineer) * Supervision of 20 Masters * Supervision of 10 PhD Theses Responsibilities - Team Leader: Power Electronics, LETI Laboratory, ENIS Co-Head of Research Unit, Components and Electronic Systems (CES) Head of Research Group, Power Electronic Group (PEG) at ENIS Present. - Member of the Masters Theses and Habilitation Committees in electrical engineering at the ENIS. - Member of the Committee for reviewing the educational program in electrical engineering-enis. - Member of the Reflection and Foresight, University of Sfax since Member of the Regional Committee for hiring (nursery companies and technology pole) since Main Cooperation with Industry and Patents *GEC ALSTOM Transport (France): Identification of electrical parameters of the IGBT device models for electric power applications. *INES: Studies and realization of electric wheelchairs. *GRANUPHOS: Realization of a power converter for vibrant corridor. *SEEEP: constant current battery charger. * GCT (Tunisian Chemical Group): Implementing an electronic module for controlling the anodic protection of a chilled acid. * Patent (SN04170): A photovoltaic system using a new analogue technique to track Maximum Power Point of photovoltaic solar panels. * Patent (SN05308): A Photovoltaic system for connecting solar panels to the low voltage AC network (220V/50Hz). 2

3 Main Cooperation with universities * CNRS/DGRST Project: Designing a board battery charger, in an electric vehicle, adapted to solar panels. Between the PEG Group and the GEGELY (Lyon Electrical Centre -France) (2002) * CNRS/DGRST Project: Study and Modelling of electrothermal phenomena in hybrid IGBT modules. (Insulated Gate Bipolar Transistor): Between GEGELY (France) and PEG (2005) * CNRS/DGRST Project: Design and Implementation of Electronic systems using solar energy: photovoltaic solar panels application: Between PEG and GEGELY (France) ( ). * Tunisian-Moroccan Project: Study and Design of Electronic Systems using solar and wind energies: Connecting to the low voltage: Between the PEG and the LEI laboratory (Faculty of Semlalia-Marrakech-Morocco) ( ). * CMCU project: Architectural and energy optimization in power converters using photovoltaic solar panels. Between the PEG and the AMPERE Laboratory- INSA Lyon-France ( ). * Tunisian-Egyptian Project :Modeling and Simulation of Conductive EMI of Power Electronic Converters in photovoltaic applications: Between the PEG-ENIS and the Faculty of Engineering, Ain Shams University, Cairo, Egypt ( ). Main Publications in Journals 1/ B. Allard, H Morel, Anis AMMOUS, S. Guedira, Extension of causality analysis to bond graphs including state space models SCS Simulation Series, 1997, VOL, 29, N 1, P 72. 2/ H Morel, B.Allard, S. Guedira, Anis AMMOUS, A bond Graph Model of the PN junction SCS Simulation Series, 1997, VOL, 29, N 1, P / Anis AMMOUS et al Transient temperature measurements and modeling of IGBT s under short circuit IEEE Transaction on Power Electronics, Vol. 13, n 1, pp , January / Anis AMMOUS, et al «Choosing a thermal Model for Electrothermal Simulation of Power Semiconductor Devices» IEEE Trans on Power Electronics Vol.14, No.2, March / H. Morel, Anis AMMOUS «Formal Causality Analysis» Society for Computer Simulation, Simulation Series Vol 31, N 1, pp.65-70, 1999, USA. 6/ B. Allard, H. Morel, Anis AMMOUS «Building Averaged Models of Power Converters From switched bond Graph Representation» Society for Computer Simulation, Simulation Series Vol 31, N 1, pp , 1999, USA. 7/ Anis AMMOUS, et al «Electrothermal Modeling of IGBT s : Application to short-circuit Conditions» IEEE Transactions on Power Electronics, Vol.15, No. 4, July 2000, pp / H.Morel, B.Allard, K.Ammous, D.Bergogne and Anis AMMOUS Causality analysis and state initialisation Society for Computer Simulation, Simulation Series, Vol.33, N 1, 2001, pp / Hekmet Samet, Anis AMMOUS, Fayçal Sellami «Modélisation thermique multidimensionnelle des composants à semiconducteur par la méthode des éléments finis» les annales maghrébines de l ingénieur, vol.15, n 1, / Anis AMMOUS et al «Developing a pwm-switch model including Semiconductor Device Non-linéarities» The European Physical Journal-Applied Physics, 21, , / Anis AMMOUS, et al «Developping an equivalent thermal model for discrete Semiconductor packages» International Journal of Themal Sciences, n 5, V / Anis AMMOUS et al «Developing a PWM-switch model including Semiconductor Device Non-linéarities» IEEE Transactions on Power Electronics, Vol.18, No.5,September / Anis AMMOUS, et al An Advanced PWM-Switch model including Semiconductor Device Non-linéarities» annales maghrébines de l ingénieur, Vol 17, N 1, / M. Ayadi et Anis AMMOUS «Etude du Comportement Thermique dans les Modules Hybrides de Puissance» annales maghrébines de l ingénieur, / M. Ayadi, K. Ammous, S. Abid et Anis AMMOUS «Modélisation thermique simplifiée des structures multipuces» Revue Internationale de Génie Electrique, Vol 9, N 6, 2006, pp / K. Ammous, B.Allard, H. Garrab and Anis AMMOUS Losses Evaluation in converters Using the Calorimetric technique International Journal of Thermal Analysis and Calorimetry. Vol 90, n 1, 2007, pp / K. Ammous, S. Abid, and Anis AMMOUS Thermal Modeling of Semiconductor Devices in Power Modules Microelectronics International, Vol 24, N 3, 2007, pp / S. Abid, K.Ammous, H. Morel and Anis AMMOUS Advanced Averaged Model of pwm-switch Operating in Continuous and Discontinuous Conduction Modes International Review of Electronic Engineering (IREE), Vol. 2, N.4, July-August 2007, pp / S. Abid, K. Ammous, H. Morel and Anis Ammous PWM-Switch Modeling of Converters Including Semiconductor Device Non Linearities: CCM and DCM Conduction Modes WSEAS Transactions on Power Systems, Issue 3, Vol.2, 2007, pp / K. Ammous, Hervé Morel, Anis Ammous Analysis Of Power Switching Losses accounting Probe Modeling. IEEE Transactions on Instrumentation and Measurement, Vol 59, N.6,

4 21/ K. Ammous, Hervé Morel, Anis Ammous Inverse models of voltage and current probes. IEEE Transactions on Instrumentation and Measurement, VOL. 60, NO. 12, DECEMBER / L.Fakhfakh, S. Abid. A.Ammous Measurements and modeling of conducted EMI in a buck converter Advanced Materials Research Vol. 324 (2011) pp / B.Omri, K.Ammous, A.Ammous, H.Morel, "Nonlinear Average Modeling of Multilevel Converters", International Review on Modelling and Simulations, Vol. 5, N. 1, February / B.Omri, K.Ammous, A.Ammous. Using averaged modelling to develop capacitors voltages observer for Neutral- Point-Clamped Inverters. International revue: Advances in Power Electronics Volume 2012 (2012), Article ID / Hanen Mejbri, Kaiçar Ammous, Hervé Morel et Anis Ammous : Optimal Design of Power Converter Using Multiobjective Genetic Algorithm. International Review on Modelling and Simulations,, Vol. 5, n. 2, pp , April / Hanen Mejbri, Kaiçar Ammous, Hervé Morel and Anis Ammous : Multi-objective Optimization of Power Converter Sizing Based on Genetic Algorithms: Application to photovoltaic systems. International Review on Modelling and Simulations, Vol. 5, n. 2,pp , April / T. Lajnef, S. Abid and A. AMMOUS, Modeling and control of an Hybrid Energy system for a Grid connected Applications International Review on Modelling and Simulations,, Vol. 5, n. 2, pp , April / B.Omri, K.Ammous, A.Ammous. A New Method for Balancing Capacitors Voltages in NPC Inverter without DClink Voltages Sensors International Journal of Computer Applications ( ) Volume 65 No.22, March / T. Lajnef, S. Abid and A. AMMOUS, Modeling, control and simulation of a solar Hydrogen/Fuel cell Hybrid Energy Systems for Grid-connected applications Advances in Power Electronics, Vol. 2013, ID , April / T. Lajnef, S. Abid and A. AMMOUS, Design and Simulation of Photovoltaic Water Pumping System, International Journal of Engineering and Advanced Technology (IJEAT), Volume-2 Issue 4,April 2013 pp / Hanen Mejbri, Kaiçar Ammous and Slim Abid, Hervé Morel and A. Ammous: Bi-objective sizing optimization of power converter using genetic algorithms: Application to photovoltaic systems COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering Vol. 33 No. 1/2, 2014 pp / A. AMMOUS and H. Morel, LVDC: An Efficient Energy Solution for On-Grid Photovoltaic Applications Smart Grid and Renewable Energy, 2014, Vol. 5, No. 4, pp Selection of Publications in Conferences 1/ A. Oulha, A. Yangui, Anis Ammous, M. Mechri, F. Sellami, Technique de commande par micro-controleur d une machine asyncrone triphasée».jtea,96. 2/ B.Allard, H. Morel, S. Guedira, Anis Ammous, PACTE: a power train simulator 1996, IMACS 96, 9/12 Juin, Lille-France. 3/ Anis Ammous, S. Guedira, B. Allard, H. Morel, Estimation du risqué de destruction de l IGBT par Modélisation Electrothermique 1997, 17ème Journées Tunisiennes d Electrotechnique et d automatique Novembre 5-6 Nabeul-Tunisie. 4/ Anis Ammous, S. Guedira, B. Allard, H. Morel, D. Renault «Choosing a thermal Model for Electrothermal Simulation of Power Semiconductor Devices» Proceeding IEEE, PESC 98, May 17-22, FUKUOKA, Japan. 5/ B. Allard, H. Morel, Anis Ammous, «Averaged modeling of power converters including semiconductor device non-linearties» proceeding IEEE, PESC 98, May 17-22, FUKUOKA, Japon. 6/ Anis Ammous et al. «Estimation par la simulation du risque de destruction de l IGBT en court-circuit» EPF 98, et 18 Décembre 1998, Belfort, France. 7/ B. Allard, Anis Ammous. «Modèle Moyens des convertisseurs pour la conception en électronique de puissance «EPF 98, et 18 Décembre 1998, Belfort, France 8/ Anis Ammous, Fayçal Sellami,(LETI-Tunisie) Kaiçar Ammous, Hérve Morel,(CEGELY-Lyon) «Procédure d identification des paramètres des modèles électriques de l IGBT» Electronique de Puissance du Futur (EPF 2000). Lille-France, pp / Anis Ammous, Fayçal Sellami «Les composants IGBT : Fonctionnement, Développement et Fiabilité» premier colloque international JTEA 2000, 24 et 25 Mars 2000-Nabeul-Hammamet- Tunisie, pp / Kaiçar Ammous, Bruno Allard, Hérve Morel,(CEGELY-Lyon) Anis Ammous, Fayçal Sellami,(LETI-Tunisie) «Sur l utilisation des cellules de commutations pour la conception des systèmes de puissance intégrés» Electronique de Puissance du Futur (EPF 2000) Lille-France, pp / Kaiçar Ammous, Bruno Allard, Olivier Brevet, Hervé Morel, (CEGELY-Lyon) Anis Ammous, Fayçal Sellami, (LETI-Tunisie) «Error in Estimation of Power Switching Losses Based on Electrical Measurements» IEEE conference, PESC / Hekmet Samet, Anis Ammous, Fayçal Sellami «Modélisation thermique multidimensionnelle des composants à semiconducteur par la méthode des éléments finis» 3èmes Journées Tunisiennes sur l Ecoulements et les Transferts, JTET 2000, Mahdia, 4-6 Novembre pp

5 13/ Anis Ammous, Fayçal Sellami «Système Electonique de Puissance pour Véhicule Electrique» Premières journées scientifiques des jeunes chercheurs en génie électrique et informatique (GEI 2001), Mars 2001, Sousse-Tunisie. 14/ Kaiçar Ammous, Anis Ammous, Bruno Allard, Hervé Morel and Fayçal Sellami «Measurements in DC-Dc Converter Averaged Models» Smart System and Devices Smart Systems and Devices, Mars 2001, Hammamet- Tunisia. 15/ Anis Ammous, Moez Ayedi, Youssef Ounejjar et Fayçal Sellami «Technique d éstimation de la temperature moyenne de jonction dans l IGBT» deuxième colloque international, JTEA 2002, Mars, Sousse Nord - Tunisie, pp / Moez Ayedi, Anis Ammous, Youssef Ounejjar et Fayçal Sellami, «Principe d une commande rapprochée d un module IGBT pour onduleur embarqué dans un véhicule électrique» JTEA 2002, Mars, Sousse Nord - Tunisie, pp / Youssef Ounejjar, Anis Ammous,Moez Ayedi, et Fayçal Sellami «A three phases PWM inverter based on a nonideal averaged model» JTEA 2002, Mars, Sousse Nord -Tunisie, pp / Anis Ammous, Moez Ayedi, Youssef Ounejjar and Fayçal Sellami, PWM-Switch modeling of converters including semiconductor device non-linearities. IEEE conference ELECTRIMAX 02, Montréal. 19/ Anis Ammous, Moez Ayedi, Youssef Ounejjar, Fayçal Sellami, K. Ammous and H. Morel. «Interactions Thermiques dans un module multi-puces» EPF 2002 Lille France. 20/ Moez Ayedi, Anis Ammous, Youssef Ounejjar, Fayçal Sellami, «Thermal interaction of semiconductors devices in multi-chip modules» SMC 2002 Hammemet-Tunisie 21/ Youssef Ounejjar, Anis Ammous, Moez Ayedi, Fayçal Sellami. «An improved DTC strategy associated to a new averaged inverter model for electric vehicule application» SMC 2002 Hammemet- Tunisie. 22/ Anis Ammous, Moez Ayedi, Youssef Ounejjar and Fayçal Sellami, PWM-Switch modeling of converters including semiconductor device non-linearities : Electrothermal Modeling. IASTED 02, Greece. 23/ Youssef Ounejjar, Anis Ammous,Moez Ayedi, et Fayçal Sellami «A three phases PWM inverter based on a nonideal averaged model» GEI 2002, Hammamet, Tunisie pp. 24/ Wael Kouni et Anis Ammous «Modélisation d un système de charge de batteries à partir de panneaux solaires» JSF Décembre 2003, Tozeur, Tunisie 25/ Moez Ayedi, Anis Ammous, Youssef Ounejjar, Fayçal Sellami Comportement thermique des structures hybrides de puissance SETIT 2003, Mars, Sousse, Tunisie. 26/ Youssef Ounejjar, Anis Ammous, Moez Ayedi, Fayçal Sellami Commande en couple d une machine asynchrone :» SETIT 2003, Mars, Sousse, Tunisie. 27/ Anis Ammous, B. ALLARD, H.Morel, K.AMMOUS Switching Cell As A converter core representation for analysis International Conference on Bond Graph Modeling and Simulation (ICBGM 2003), January 19-23, 2003, pp / Anis Ammous, H.Morel, A. AMMOUS, K.AMMOUS, B. ALLARD Skin affect and Bond Graphs International Conference on Bond Graph Modeling and Simulation (ICBGM 2003), January 19-23, 2003, pp / Abid,S. et Anis Ammous.»Contribution au développement d un modèle moyen de la cellule de commutation en mode de conduction continue et discontinue» JSF Décembre 2003, Tozeur, Tunisie. 30/ Anis Ammous «Voiture Electrique : Convertisseur d énergie, chargeur de batterie embarqué et moteur électrique» Les deuxièmes Journées d Ingénierie JI, Sfax / Ayadi, M. Abid,S. and Anis Ammous, Thermal Modeling of power hybrid modules International Workshop on Thermal Investigation og ICs ans Systems, Sep 2005, Belgirate Lake Maggiore, Italy, p / Kaiçar Ammous, Haous Elyes, and Anis Ammous A Multilevel Converter Averaged Model Including Semiconductor Device Non-linearities ELECTRIMACS 05 April 17 20, 2005, Hammamet, Tunisia. 33/ Moez Ayadi, and Anis Ammous "Thermal modeling of hybrid module ".ELECTRIMACS 05 April 17 20, 2005, Hammamet, Tunisia. 34/ Abid,S, and Anis Ammous "Averaged Modeling of the PWM-Switch Operating in Continuous and Discontinuous Conduction Modes ".ELECTRIMACS 05 April 17 20, 2005, Hammamet, Tunisia. 35/ M. Ayedi, S. Abid, and Anis Ammous «Thermal Simulations of Multi-chips Module» IEEE International Conference on Electronics, Circuits and Systems ICECS 2005, Gammarth- Tunisia, pp / H. Morel, B. Allard, M Rad S. Anis Ammous Bond Graph Representation of an Optimal Control Problem: The exemple of the DC Motor International Conference on Bon Graph Modeling and Simulation (ICBGM 2005), New Orleans, Louisiana USA. 37/ Abid,S. Ammous K.et Anis Ammous PWM-switch modeling of converters including semiconductor device Non linearities JTEA Mai Tunisia. 38/ Moez Ayadi, and Anis Ammous Modélisation Electrothermique des modules hybrids IGBT JTEA Mai Tunisia. 39/ Slim Abid and Anis Ammous Averaged Modeling of DC/DC and DC/AC converters including semiconductor devices non linearities IEEE International Conference on Design and Test in Integration Systems June / Elleuch Lassad, Isam Ben Hsan, et Anis Ammous «Modélisation du couplage d un générateur PV au réseau électrique BT» International Congress on the Engineering of renewable Energies CERE 2006 Hammemet Tunisia. 5

6 41/ Elleuch Lassaad, Arafet Ltifi; HAJ Abdallah Hsan, Anis Ammous Génerateurs décentralisés connectés au réseau électrique : Réglementation et impact sur la tension» International Congress on the Engineering of renewable Energies CEERE 2006 Hammemet Tunisia. 42/ Elleuch Lassad, Ltifi Arafet, Hsan Hadj Abdallah et Anis Ammous Power transfer control between Photovoltaic systems and low voltage network» International Conference on Electrical Engineering Design and Technologies ICEEDT 2007 Tunisia. 43/ M. S. Rady, M. Ezzat, Anis Ammous, M. Abdelrahman, M. Matar, «EMTP theory based modeling of DC-DC boost converter for Photovoltaic applications accepted MEPCON 14 6