Keynote Tuesday, June 2, Introduction to The CONNECT Edition 9:00 10:00 Rob Whitesell, SVP, Software Engineering, Bentley Systems

Transcription

1 Keynote Tuesday, June 2, 2015 Introduction to The CONNECT Edition 9:00 10:00 Rob Whitesell, SVP, Software Engineering, Bentley Systems The CONNECT Edition: A New Paradigm for Project Delivery 10:30 12:00 Discover how to transform your project delivery. No matter what your role on a design or building project and no matter how large or small your project, hear first hand how you will increase your individual productivity and simplify project wide collaboration for all project participants. With improved project execution, you will increase your ability to deliver the best performing buildings, bridges, roads power plants, utility networks, mines, and other infrastructure projects on time, on budget, and with less risk. The CONNECT Edition is Bentley s next generation of infrastructure software, and will establish a new paradigm for Project Delivery. Hear about the CONNECT Edition innovations for MicroStation, ProjectWise and Navigator. Hear how these innovations leverage the latest technology enablers, including cloud services, touch, mobile, and more. Robert Mankowski, VP, Simulation Product Management, Bentley Systems Bill McNamara, Senior Product Manager, Bentley Systems David Huie, Senior Marketing Manager, Bentley Systems Manufacturing Industry Forum Tuesday, June 2, 2015 Optioneering, Project Delivery and Asset Information Management: For Better Performing Facilities 13:00 13:45 Factory owners can significantly reduce their production costs and bring products to market faster by streamlining the design, construction, and operations of both their new and existing factory buildings with their manufacturing processes. Bentley is unique in being able to bring together all the disciplines involved in designing and building these facilities together with tools that monitor and measure the performance of production lines and operations. In this way, owners can determine the best options for increasing production, improving quality, meeting new regulatory requirements, or even making new products with existing facilities. Andy Smith, Solutions Exec, Building and Discrete, Bentley Systems Next Generation Digital Factory Design: Living in the Point Cloud 13:45 14:30 Siemens PLM Software, who has been working closely with Bentley on a bold new vision to integrate the product, manufacturing and facilities engineering lifecycles, will present the next innovation in digital factory design. Siemens PLM Software and Bentley aim to harmonize and unify the processes and information assets created as a part of digital factory design, acknowledging that the product and facility are dynamic assets that follow concurrent but separate lifecycles from conception to end of life. The joint offering aims to bring the as built digital product and production lifecycle information in to a process simulation solution that process planners and plant/facility designers can leverage. The solution enables faster and better manufacturing and facilities engineering iterations, and also provides greater visibility to simulate construction and manufacturing processes prior to project execution for cost reduction and safety. Torsten Beste, Director Strategic Solutions, Siemens Bridging the OPEX/CAPEX Divide with Advanced Engineering Information Management 14:45 15:30 Changing regulations and strong global competition force manufacturers to constantly adapt their production facilities to take advantage of new technologies. Maintaining accurate engineering information between operations and projects so that engineering decisions are based on trustworthy data, construction is streamlined, and plant shutdowns are minimized is a challenge. However, it s a challenge that can be solved with today s advanced engineering information management systems. Joel Rosenbaum, Solutions Director, Bentley Systems User Success: The Business Value 15:30 16:15 In this session an owner will describe its experience using Bentley technology, the ROI to date, and expected future ROI. Manufacturing Q&A 16:30 17:00 Andy Smith, Solutions Exec, Building and Discrete, Bentley Systems Joel Rosenbaum, Solutions Director, Bentley Systems

2 Transportation Industry Forum Tuesday, June 2, 2015 Transportation Industry Vision 13:00 13:45 Bentley has been a trusted partner in transportation for road and rail projects for over 25 years. Though industry has changed, Bentley has stood shoulder to shoulder with owner operators and other in the industry professionals as they have tackled some of the world s most demanding projects. Bentley solutions encompass data acquisition, project delivery, enabling BIM beyond design and construction, into operations and maintenance of transportation infrastructure. This session will deliver Bentley s vision for the future of our industry, expose some of the myths about BIM, and look at the journey toward its adoption around the world through real life projects and success stories. The session will also outline how Bentley will help existing and future users achieve even greater successes. Mo Harmon, Solutions Executive, Road and Bridge, Bentley Systems User Success Story Local Keynote 13:45 14:30 Hear from industry experts and practitioners on their successful implementations of Bentley solutions in real world projects. Integrated Project Delivery for Design and Construction 14:45 15:30 Bentley s technology from data acquisition to detailed engineering analysis to construction deliverables has been the standard in transportation for over 25 years delivering projects of all sizes and complexity on time and under budget. Bentley excels in federating project information, integrating project teams and enabling collaboration between offices around the world. Bentley playbooks and products combine with Bentley s Project Delivery solution to control and distribute engineering design information and construction deliverables, to achieve 3D collaborative BIM. Ray Filipiak, Technical Manager Transportation, Bentley Systems Asset Information and Performance Management with AssetWise 15:30 16:15 Bentley s long standing position as a leading provider of transportation engineering solutions evolved naturally over the years into a parallel focus on transportation asset management including industry leading products such as InspectTech, Exor, Optram, SUPERLOAD and AssetWise APM. Jeremy Shaffer, Senior Director, Product Management, Bentley Systems Discussion, Q & A, and Closing Comments 17:00 16:30 This session offers attendees the opportunity ask questions of Bentley presenters relative to topics covered above and as time permits to engage in an open discussion of current challenges and best practices. Mo Harmon, Solutions Executive, Road and Bridge, Bentley Systems Ray Filipiak, Technical Manager Transportation, Bentley Systems

3 AutoPIPE Application Seminar Tuesday, June 2, 2015 Design Integration with AutoPIPE: A Look at the Impact on the Bottom Line 13:00 13:45 Design, modeling, and information mobility go hand in hand to help increase design quality, project efficiency, and overall collaboration. The intelligent 3D models are key to accelerated project delivery, and information mobility is more than simply accessing files in multiple locations. The ability to pass information across project teams and disciplines, and through project lifecycle phases, in a controlled, secured manner is important. This presentation will provide real world examples of successful implementations of Bentley design and collaboration tools as well as the ROI delivered when employing these strategies. Luke Andrew, Product Manager, Bentley Systems AutoPIPE: Design and Modeling 13:45 14:30 AutoPIPE provides a comprehensive and advanced software tool specialized in pipe stress analysis. The intuitive modeling environment and the advanced analysis features provide for increased productivity and improved quality control. In this session discover how AutoPIPE combines traditional engineering design with advanced and innovative 3D modeling technology. This presentation will showcase how AutoPIPE can improve the model s behavior and ability to react to design changes. User Success: Saving Time and Money with Bentley Pipe and Vessel Solutions 14:45 15:30 Luke Andrew, Product Manager, Bentley Systems AutoPIPE Vessel s Impact on the Bottom Line 15:30 16:15 AutoPIPE Vessel provides comprehensive, flexible modeling and an easy to use interface that enables designers to find solutions quickly. Discover how AutoPIPE Vessel combines traditional engineering design with advanced and innovative time and cost reducing technology. This presentation will showcase how AutoPIPE Vessel can improve vessel and heat exchanger design. Advanced Pressure Vessel Design Heat Exchanger and Air Cooler Design Motion and Blast Calculations Lifting and Erection Calculations Support for Design Codes from Around the World AutoPIPE Q&A 16:30 17:00 Luke Andrew, Product Manager, Bentley Systems

4 Water, Wastewater, and Stormwater Modeling Application Seminar Tuesday, June 2, 2015 Improved Engineering and Operations of Water Distribution and Wastewater Systems 13:00 13:45 Bentley users around the world are relying on decision support tools for their water distribution and wastewater networks in order to improve their knowledge of how infrastructure behaves as a system, how it reacts to operational strategies, and how it should grow as population and demands increase. In this session, specific user examples from the Be Inspired Awards will be discussed, including how their projects improved water and wastewater system reliability, efficiency, and sustainability. Tom Walski, Bentley Fellow, Bentley Systems Long Term Planning for Water and Wastewater Systems 13:45 14:30 Long term capital and master plans are essential for a well managed water or wastewater system. However, it can be difficult to prioritize capital improvement priorities, or even determine the size and scope of future projects. This session will introduce a series of engineering tools to help water and wastewater professionals create capital and master plans. These tools make it easy to prioritize capital improvement projects, and develop detailed and hydraulically accurate plans for future system expansion. Joel Johnson, Sales Consultant, Bentley Systems Complementing Your SCADA Data for Effective Forecasting and Operations 14:45 15:30 SCADA systems provide operators with a live snapshot of the water distribution system. However, when it comes to predicting how the system will operate in the short to medium term, operators need more than just SCADA data. This session will introduce a hydraulic modeling system that helps operators predict the future from analyzing pump schedules to minimize energy cost, to determining if there is enough system capacity to deal with a planned shutdown during a peak day. Tom Walski, Bentley Fellow, Bentley Systems User Success: Optimizing Water and Wastewater Systems 15:30 16:15 Learn how water professionals are benefiting from their use of Bentley's latest hydraulics and hydrology software technology to design new water and wastewater infrastructure cost effectively, manage and optimize existing water and wastewater systems, improve team productivity, and reduce project costs. Joel Johnson, Sales Consultant, Bentley Systems Hydraulics and Hydrology Q&A 16:30 17:00 Tom Walski, Bentley Fellow, Bentley Systems Joel Johnson, Sales Consultant, Bentley Systems LEARNing Day Wednesday, June 3, 2015 CONNECT Edition LEARNing Day 9:00 12:00 Shawn McGaffick, Manager, LEARNing Consulting, Bentley Systems Ray Roske, Technical Manager, Bentley Systems

5 AECOsim Building Designer Application Seminar Wednesday, June 3, 2015 Multi discipline Building Information Modeling with AECOsim Building Designer 13:00 13:45 Learn about the new and enhanced capabilities in the latest release of AECOsim Building Designer that enable building teams to be more efficient and productive in their daily work. From better documentation to enhanced interfaces, this session will provide an overview of the features and functionalities that increase productivity, extend interoperability, and enhance the user experience. Jeffrey Ashley, Director, Building Technologies, Bentley Systems Advancing BIM with Computational Design 13:45 14:30 Discover why AECOsim Building Designer is advancing BIM through greater integration with GenerativeComponents, Bentley s computational design software. Users can now generate parametric designs and explore various scenarios quickly in GenerativeComponents and maintain information in the models with fully attributed BIM elements. Additionally, this session will uncover how users can collaborate on models simultaneously with integrated BIM workflows and leverage existing parametric design data with file referencing capability. Rob Riley, Technical Manager Building, Bentley Systems Workgroup Productivity: Accelerating Workflow and Managing Work Spaces 14:45 15:30 A well designed building does not occur by chance. It is made possible through software that promotes collaboration through streamlined workflows and the ability to manage work spaces. This session will cover how AECOsim Building Designer provides benefits for engineers and architects within a common workflow to increase productivity and collaboration across teams, especially when coupled with Bentley s ProjectWise collaboration servers. Jeffrey Ashley, Director, Building Technologies, Bentley Systems User Success: Winning with AECOsim Building Designer 15:30 16:15 Learn why firms of all sizes are adopting AECOsim Building Designer as their BIM solution. See why AECOsim Building Designer continues to deliver significant advantages for the world s leading architectural and design projects. Examples of real world projects using AECOsim Building Designer will illustrate how using BIM has reduced project costs, increased efficiency, enabled collaboration across distributed teams, and saved hundreds of man hours. AECOsim Building Designer Q&A Session 16:30 17:00 Jeffrey Ashley, Director, Building Technologies, Bentley Systems Rob Riley, Technical Manager Building, Bentley Systems

6 Bridge Design and Analysis Application Seminar Wednesday, June 3, 2015 The Future of Bridge Design, Modeling and Analysis: 3D Modeling from Design to Decommission 13:00 13:45 Design, modeling and analysis are keys to the success of bridge projects. Bentley s next generation of bridge modeling software is purpose built for bridge designers and consultants who need to create, augment, maintain, and document a wide variety of bridge information throughout the lifecycle of the project. Sharing information in an information rich 3D model increases data quality, collaboration and asset management, and reduces overall costs for the entire ecosystem involved. Intelligent 3D models are key to accelerated project delivery and information mobility. This presentation will provide a demonstration of how this powerful new software interoperates with Bentley civil design and collaboration tools, giving users a fresh approach to bridge projects of all sizes. Shri Bhide, Director, Product Management, Bentley Systems Bridge Information Modeling: Solutions for Bridges of all Sizes: Concrete, Steel, Suspension, Cable Stayed and More 13:45 14:30 The concept of BrIM (Bridge Information Modeling) has become reality for today s bridge projects. BrIM is an innovative approach to bridge design, construction, operations, and project delivery, resulting in the creation of an information rich data model that can be used for the life of the bridge. All indicators point to a readiness for an intelligent and data rich 3D model that connects design, construction, operations, and maintenance. Bentley s LEAP, RM Bridge, InspectTech, and new modeling software solutions can reduce construction costs with more economical designs and improve design quality. Discover how to model the step by step construction process in 4D, and realistically visualize projects with imagery and virtual drive thrus. The growing popularity of design build and P3 projects has set the stage for higher owner expectations for faster and more efficient methods of building our transportation assets. Ron Love, Senior Product Manager, Bentley Systems RM Bridge: 2D/3D/4D Bridge Modeling, Design, Analysis, Fabrication, and Construction 14:45 15:30 Used worldwide by consulting engineering firms, government transportation organizations, contractors, and project consortia, RM Bridge sets the standard for both routine and signature bridge design and delivery. RM Bridge software can be used for accurately modeling bridges, and represents a powerful analysis, design, and construction tool. Any type of bridge, material or analysis for any of international codes can be handled. RM Bridge makes use of many internal functions to facilitate economic bridge design. Explore how the latest user friendly and technical enhancements increase integrated approach in the creation and construction of bridge systems, which in turn reduces risk and helps deliver top performing bridges. Shri Bhide, Director, Product Management, Bentley Systems Project Showcase: Building Better Bridges with Bentley 15:30 16:15 See how firms of all sizes are using Bentley s bridge solution for design, analysis, modeling and inspection. Ron Love, Senior Product Manager, Bentley Systems Bridge Design and Analysis Q&A 16:30 17:00 Shri Bhide, Director, Product Management, Bentley Systems Ron Love, Senior Product Manager, Bentley Systems