TESTING & INTEGRATION GROUP SOLUTION GUIDE

Transcription

1 TESTING & INTEGRATION GROUP SOLUTION GUIDE AppDirecor optimizing the delivery of VMware View 4.5 Contents INTRODUCTION... 2 RADWARE APPDIRECTOR... 2 VMWARE VIEW... 2 RADWARE APPDIRECTOR AND VMWARE VIEW SERVER ARCHITECTURE... 3 IMPORTANT IMPLEMENTATION NOTES... 4 CONFIGURATION... 5 APPDIRECTOR ACTIVE CONFIGURATION... 5 APPDIRECOR STANDBY CONFIGURATION VMWARE VIEW CONNECTION SERVERS CONFIGURE VMWARE VIEW GLOBAL SETTINGS TECHNICAL SOLUTION GUIDE DATE: Thursday, January 06, 2011 Version: 1.0 Author Elad Kurzweil

2 Introduction Implementing VMware View in an organization introduces a new set of challenges for IT, pushing its infrastructure to its limits and challenging its current administration policies. VMware View requires that an organization meet SLA commitments and provide QoE assurances. The inability to comply with these requirements will result in user frustration and loss of user productivity. This guide presents a basic integration solution in which Radware s load balancing and acceleration product, AppDirector, is set up in front of a VMware View environment to ensure its availability and performance in order to meet SLA and QoE requirements. Radware AppDirector Radware offers an array of solutions that address the challenges presented by VMware View. AppDirector delivers performance improvement, availability assurance and acceleration of content delivery to clients using VMware View by utilizing load-balancing, health checks and Web acceleration capabilities, while ensuring session persistency between clients and servers. The advantages of using AppDirector in such a deployment are: Load balancing the VMware View cluster of VMware View servers using high availability (HA) and traffic management. Health monitoring of the VMware View servers, indicating which servers are up or down Hardware HA with two AppDirectors One IP (VIP) that the VMware View client connects to VMware View Deliver rich, personalized virtual desktops to any device with all the benefits of centralized enterprise desktop management. The VMware View portfolio of products lets IT run virtual desktops in the datacenter while giving end users a single view of all their applications and data in a familiar, personalized environment on any device at any location. Get greater flexibility, reliability, efficiency and security managing desktops and applications from the datacenter. Lower costs by centralizing management, administration and resources Increase security by moving data from desktop devices into the datacenter Improve business agility with faster provisioning and user flexibility with universal access 2

3 Radware AppDirector and VMware View Server Architecture FIGURE 1 TESTED CONFIGURATION 3

4 Important Implementation Notes 1. The AppDirector offloads SSL and TCP processing from the Connection server. For that, it proxies all incoming connections and terminates the SSL and TCP connections from the clients. On the server side it manages a small number of TCP connections and maintains them open on behalf of multiple clients using clear HTTP as the transport protocol. Clients IPs are NATed behind the AppDirector. 2. Note: In case that the Connection server has to get the client IP as the source IP, the Client NAT configuration, the extended farm and server NAT settings and L4 HTTP policy settings should change. 3. Throughout this guide, reference is made to the Radware preconfigured certificate, but you can import a certificate or create a new certificate in AppDirector. For more information on exporting, importing, or creating a certificate, see the Radware AppDirector User Guide. 4. Make sure to deactivate the check box on the VMware View Administration management called Require SSL for client connections. See description below. Figure 1 illustrates the configuration that was tested, which includes the following work flow: 1. The remote clients connect to the VIP (AppDirecor IP) using the SSL protocol. 2. The AppDirector is the termination point of the SSL traffic, offloading SSL processing and forwarding only HTTP traffic to the VMware View Connection server. The AppDirector selects one of the VMware View Connection servers (according to the load balancing algorithm that is configured on the AppDirector) and redirects the specific session to the selected VMware View Connection server over HTTP. The AppDirector keeps a small number of TCP connections constantly open with the server to save the establishment and tear down of TCP connections on the servers. It uses its own IP as the source IP of these connections. 3. The VMware View Connection servers verify that the user is allowed to access a Virtual Desktop machine with the LDAP server (Active Directory). 4. If the user is allowed to connect to a Virtual Desktop, the VMware View Connection server chooses one of the ESX servers that the VM is running on. 5. All return traffic goes through the ESX server back to the VMware View Connection server, and back to the AppDirector over HTTP (port 80), and from the AppDirector to the Client over HTTPS (port 443). 4

5 Software and Hardware The following is a list of hardware and software tested to verify the interoperability of the presented solution: Microsoft Windows 2008 R2 x64bits Radware s AppDirector ODS1 v.2.30 (2 units) VMware View Connection Server, Agent and client v4.5 VMware vcenter 4.1 VMware ESX 4.1 Configuration APPDIRECTOR ACTIVE CONFIGURATION Network Configuration - Create IP /24 on port 1 - Create /24 on port 2 - Create default route to Farm Configuration - Create a farm named vmware.view in AppDirector -> Farms -> Farm Table with these parameters, - Farm Name vmware.view - Aging Time Session mode RemoveOnSessionEnd-SPS - Dispatch Method - Cyclic - Connectivity checks No Checks - Create a farm named vmware.view.http.tunnel in AppDirector -> Farms -> Farm Table with these parameters: - Farm Name vmware.view.tunnel - Aging Time Session mode RemoveOnSessionEnd-SPS - Dispatch Method - Cyclic - Connectivity checks No Checks 5

6 Client NAT Configuration - Enable Client NAT in AppDirector -> NAT -> Client NAT -> Global Parameters with these parameters, - Client NAT Enable - Create Client NAT address table in AppDirector -> NAT -> Client NAT -> NAT Addresses with these parameters, - From IP To IP Create Client NAT Intercept addresses in AppDirector -> NAT -> Client NAT -> Intercept Addresses with these parameters, - From IP Client To Client IP Extended Farm Configuration - Enable Client NAT address range in AppDirector -> FARM -> Extended Parameters with these parameters, - IPv4 Client NAT Address Range Servers Configuration - Create a server named view.server.1 and attach it to the farm vmware.view in AppDirector -> Servers -> Application Servers -> Table with these parameters: - Server Name view.server.1 - Farm Name vmware.view - Server Address Client NAT Enable - Client NAT Address Range Create a server named view.server.2 and attach it to the farm vmware.view in AppDirector -> Servers -> Application Servers -> Table with these parameters: - Server Name view.server.2 - Farm Name vmware.view - Server Address Client NAT Enable - Client NAT Address Range Create a server named view.server.1 and attach it to the farm vmware.view.tunnel in AppDirector -> Servers -> Application Servers -> Table with these parameters: - Server Name view.server.1 - Farm Name vmware.view.tunnel - Server Address

7 - Client NAT Enable - Client NAT Address Range Create a server named view.server.2 and attach it to the farm vmware.view.tunnel in AppDirector -> Servers -> Application Servers -> Table with these parameters: - Server Name view.server.2 - Farm Name vmware.view.tunnel - Server Address Client NAT Enable - Client NAT Address Range HTTP Policy Configuration - Create HTTP Policy named tcp.multiplexing in vmware.view in AppDirector -> Layer 4 Traffic Redirection -> HTTP Policies with these parameters: - Multiplex Back-End connections Enabled - Back-End Connection close idle timeout Layer 7 Configuration 1. Create a Layer 7 server persistency policy in AppDirector -> Layer 7 Server Persistency -> Text Match with these parameters: - Farm Name vmware.view - Application Port 0 - L4 Protocol TCP - Persistency Identifier JSESSIONID - Lookup Mode Text - Stop Chars - ;, (make sure not missing the 2 delimiters ;, ) - Learning Direction Server Reply - Ignore Server Reply Never - Inactivity Timeout Create a Layer 7 server persistency policy in AppDirector -> Layer 7 Server Persistency -> Text Match with these parameters: - Farm Name vmware.view.tunnel - Application Port 0 - L4 Protocol TCP - Persistency Identifier tunnel? - Lookup Mode Text - Learning Direction No Learning - Ignore Server Reply Never - Inactivity Timeout

8 3. Create a Layer 7 Method in AppDirector -> Layer 7 Farm Selection -> Method with these parameters: - Method Name default - Method Type Regular Expression - Arguments EXP=. 4. Create a Layer 7 Method in AppDirector -> Layer 7 Farm Selection -> Method with these parameters: - Method Name tunnel - Method Type Text - Arguments TXT=tunnel? 5. Create a Layer 7 policy in AppDirector -> Layer 7 Farm Selection -> Policy with these parameters: - Policy Name Policy.HTTP - Policy Index 1 - First Method tunnel - Farm Name vmware.view.tunnel 6. Create a Layer 7 policy in AppDirector -> Layer 7 Farm Selection -> Policy with these parameters: - Policy Name Policy.HTTP - Policy Index 10 - First Method default - Farm Name vmware.view SSL Policy Configuration 7. Create an SSL policy in AppDirector -> L4 Traffic Redirection -> SSL Policy with these parameters: - Policy name HTTPS.policy - Certificate radware - Listening Server Port 80 - HTTP Redirection Conversion State - Enabled Note: Throughout this guide, reference is made to the radware pre-configured certificate, but you can import a certificate or create a new certificate in AppDirector. For more information on exporting, importing, or creating a certificate, see the AppDirector User Guide. 8

9 Layer 4 Configuration 1. Create a Layer 4 policy for HTTPS Traffic named VIEW.HTTPS in AppDirector -> Servers -> Server Table with these parameters: - Virtual IP L4 Protocol TCP - L4 Port Farm Name vmware.view - Application HTTPS - L7 Policy Policy.HTTPS - HTTP Policy - tcp.multiplexing - SSL Policy HTTPS.policy 2. Create a Layer 4 policy for HTTP Traffic named VIEW.HTTP in AppDirector -> Servers -> Server Table with these parameters: - Virtual IP L4 Protocol TCP - L4 Port 80 - Farm Name vmware.view - HTTP Policy - tcp.multiplexing - Application HTTP - L7 Policy Policy.HTTP 9

10 AppDirector Health Monitoring 1. Enable Health Monitoring in Health Monitoring -> Global Parameters. 2. Create a check for HTTP on server in Health Monitoring -> Check Table with these parameters: - Check name VIEW.Server.1 - Method HTTP - Destination Host Arguments 1. Path / 2. HTTP Method GET 3. Match search string VMware 4. Match Mode String exists - Dest Port Create a check for HTTP on server in Health Monitoring -> Check Table with these parameters: - Check name VIEW.Server.2 - Method HTTP - Destination Host Arguments 1. Path / 2. HTTP Method GET 3. Match search string VMware 4. Match Mode String exists - Dest Port Bind the check VIEW.Server.1 to Server vmware.view in Health Monitoring -> Binding Table. 5. Bind the check VIEW.Server.2 to Server vmware.view in Health Monitoring -> Binding Table. 10

11 VRRP Configuration 1. Enable VRRP in AppDirector -> Redundancy -> Global Configuration with these parameters: - IP Redundancy Admin Status VRRP - Interface Grouping Enable - ARP with interface grouping Send - Backup Fake ARP Enable - Backup Interface Grouping Enable 2. Create Virtual Router interfaces in AppDirector -> Redundancy -> VRRP -> Virtual Router Table with these parameters: - IF Index 1 - VR ID 1 - Priority 255 (Highest number is Active device) - Primary IP Leave all other options as default 3. Create Virtual Router interfaces in AppDirector -> Redundancy -> VRRP -> Virtual Router Table with these parameters: - IF Index 2 - VR ID 2 - Priority 255 (Highest number is Active device) - Primary IP Leave all other options as default 4. Create Associated IP Addresses in AppDirector -> Redundancy -> VRRP -> Associated IP Addresses with these parameters: - IF Index 1, VR ID 1, Associated IP IF Index 1, VR ID 1, Associated IP IF Index 2, VR ID 2, Associated IP

12 Mirroring Configuration 1. Enable Mirroring in AppDirector -> Redundancy -> Mirroring -> Active Device Parameters with these parameters: - Client Table Mirroring Enable - Session Id Table Mirroring Enable 2. Add Mirror device in AppDirector -> Redundancy -> Mirroring -> Mirror Device Parameters with these parameters: - Mirror Device IP

13 APPDIRECOR STANDBY CONFIGURATION Network Configuration - Create IP /24 on port 1 - Create /24 on port 2 - Create default route to Auto Generating the Backup Configuration from the Primary AppDirector 1. From the web interface menu of the Primary AppDirector, select File -> Configuration -> Receive from Device and choose Backup (Active-Backup) save the file on your computer and call it AppDirector.backup.txt. 2. Open the browser on the AppDirector backup device and upload the saved configuration (AppDirector.backup.txt) in File -> Configuration -> Send to Device 3. Reboot the AppDirector Backup device VRRP Configuration 5. Enable VRRP in AppDirector -> Redundancy -> Global Configuration with these parameters: - IP Redundancy Admin Status VRRP - Interface Grouping Enable - ARP with interface grouping Send - Backup Fake ARP Enable - Backup Interface Grouping Enable 6. Create Virtual Router interfaces in AppDirector -> Redundancy -> VRRP -> Virtual Router Table with these parameters: - IF Index 1 - VR ID 1 - Priority 255 (Highest number is Active device) - Primary IP Leave all other options as default 7. Create Virtual Router interfaces in AppDirector -> Redundancy -> VRRP -> Virtual Router Table with these parameters: - IF Index 2 - VR ID 2 - Priority 255 (Highest number is Active device) - Primary IP Leave all other options as default 8. Create Associated IP Addresses in AppDirector -> Redundancy -> VRRP -> Associated IP Addresses with these parameters: - IF Index 1, VR ID 1, Associated IP IF Index 1, VR ID 1, Associated IP IF Index 2, VR ID 2, Associated IP

14 Mirroring Configuration 3. Enable Mirroring in AppDirector -> Redundancy -> Mirroring -> Active Device Parameters with these parameters: - Mirroring Status - Enable 4. Add Mirror device in AppDirector -> Redundancy -> Mirroring -> Mirror Device Parameters with these parameters: - Mirror Device IP

15 VMware View Connection Servers CONFIGURE VMWARE VIEW GLOBAL SETTINGS In this scenario AppDirecor terminates the SSL traffic and works with HTTP on the VMware View Connection servers. By default, the VMware View Connection servers are configured to work in SSL mode. To disable the SSL mode: 1. Log into VMware View administration 2. Select the Configuration tab 3. In Global Configuration, click Edit. 4. Deselect Require SSL for client connections and View Administrator. 5. Create the same configuration for all servers. 6. Go to View Configuration > Servers and edit each connection server, add the External URL name (this will be the name that the clients are pointing to) 15

16 16

17 Technical Support Radware offers technical support for all of its products through the Radware Certainty Support Program. Please refer to your Certainty Support contract, or the Radware Certainty Support Guide available at: For more information, please contact your Radware Sales representative or: U.S. and Americas: (866) International: +972(3)