Capacitance Digital Converter IC for Electrostatic Capacitive Touch Sensors Evaluation Board User's Manual
|
|
|
- Lionel Douglas
- 7 years ago
- Views:
Transcription
1 Capacitance Digital Converter IC for Electrostatic Capacitive Touch Sensors Evaluation Board User's Manual EVAL BOARD USER S MANUAL Introduction This manual contains configuration, usage, setup guide (page 1), and main specifications regarding Capacitance touch sensor Evaluation board kit (LC717A00ARGEVK). For the latest edition of this manual, please refer to ON Semiconductor homepage. Product Outline This kit includes four (4) different Evaluation boards that can evaluate Capacitance touch sensor operation in various switch patterns and Communication tools to make register setting changes on PC. Evaluation Board LC717A00AR01GEVB Evaluation Board LC717A00AR02GEVB Evaluation Board LC717A00AR03GEVB Conversion Module LC717A00ARGPGEVB Multi-functional USB I 2 C Conversion Module MM FT232H USB Cable SETUP GUIDE Thank you for purchasing our LC717A00ARGEVK, the Capacitance touch sensor Evaluation board. Necessary Operational Environment Following operational environment is necessary in order to use LC717A00AR Software, the Touch sensor Evaluation board application. Correspondence OS: Windows XP (32 bit), Windows 7 (32 bit) Memory Capacity: More than 16 MB Hard Disc Capacity: Amount of Space More than 500 kb (Application Size). Need Additional Size (Optional) for Obtaining Log File. Interface: USB2.0 Setup 1. Download the D2XX drivers from the corporate home page of FTDI ( 2. Decompress the zipped file. 3. Connect the MM FT232H and the PC with USB Cable. 4. Install D2XX drivers for MM FT232H. Once the installation is done, disconnect MM FT232H from PC. 5. Connect the MM FT232H and the Touch sensor Evaluation board (LC717A00AR01GEVB or LC717A00AR02GEVB). Next, connect the MM FT232H and the PC with USB Cable. 6. Install LC717A00AR software to PC. LC717A00AR software is available for download from the ON Semiconductor website at Please search part number LC717A00ARGEVK and look under the software section. After installing software folder please double-click on LC717A00App.exe to start program. Connecting Multifunctional USB Conversion Module Where appropriate, please connect Capacitance touch sensor Evaluation board and Multifunctional USB conversion module as shown in the Figure 2. When connecting Multifunctional USB conversion module, make sure to have USB cable unplugged. When unplugging Multifunctional USB conversion module, please unplug USB cable before the module. Use of AC Adapter Please use 5 V AC adapter when using LC717A00AR01GEVB without connecting to PC. NOTES: Please take extra care for polarity Using wrong polarity may cause IC damage. Some AC adapter with large anti-ground noise may not be used. Semiconductor Components Industries, LLC, 2014 September, 2014 Rev. 4 1 Publication Order Number: EVBUM2149/D
2 Usage Advisory When using AC adapter, please switch the jumper of LC717A00AR01GEVB to AC adapter side. If error is displayed when starting LC717A00AR Software, please check the following: Please make sure that Device driver is operating correctly: If! is shown at USB Serial Port in Windows Device manager, Device driver is not operating correctly. In such a case, disconnect the device from PC and reconnect it again. If! still shows up on the screen after disconnecting so many times, please reinstall the Device driver. EVALUATION BOARDS LC717A00AR01GEVB Evaluation Board This Evaluation board has 4 2 switch pattern with an LED in the center. Acrylic board is mounted on the board with a space of approx. 1.5 mm. When the user touches the Green light, which is lit under this acrylic board, the color will change to Red. Configuration 1. Connector for Multifunctional USB I 2 C Conversion module: This is used to connect Multifunctional USB I 2 C conversion module MM FT232H. By using this module, user can connect the Evaluation board and PC. By connecting this Evaluation board to PC and activating Touch sensor evaluation application LC717A00AR Software on PC, user can change the parameter of touch sensor LSI, or can monitor an operation condition. Also, power will be supplied from this connector. 2. Power source switching jumper: This is used to set a supplier of the power source. If this is set on PC side, power is supplied from Multifunctional USB conversion module. If this is set on AC ADAPTER side, power is supplied from DC jack. Connector for Multifunctional USB Conversion Module Power Source Switching Jumper DC Jack 3. DC Jack: This is used to connect AC adopter (+5 V). (Note: Using wrong polarity will damage this jack) 4. RESET switch: This is used to RESET Capacitance touch sensor LSI. Use this switch when Error LED is lit or if any abnormality is found during operation. 5. Error LED: This will light up when error is occurring in Capacitance touch sensor LSI. When this LED is lit, press RESET switch to release the error. 6. Capacitance touch sensor LSI: Please do not touch this during operation It may cause malfunction or breakdown. 7. Touch switch area: An area where Touch switch is located. Touch switch is Green at power ON. When the user touches the Green light, Touch sensor will react and change the color to Red. RESET Switch Error LED LSI (LC717A00AR) Touch Switch Area Figure 1. Configuration of LC717A00AR01GEVB 2
3 How to Use 1. When receiving power from PC, set Power switching jumper to PC side and connect MM FT232H to the connector for Multifunctional USB conversion module (See Figure 2). If receiving power from optional AC adapter, set the jumper to AC ADAPTER side and connect AD adapter to DC jack. 2. Press RESET switch. 3. Red LED will light up by touching Green LED light (See Figure 3). 4. Press RESET switch in case of error LED light up or when Evaluation board is acting strange. 5. Please note: If the user directly touches the IC on the Evaluation board or patterns with their finger, it may cause malfunction or breakdown. MM FT232H Pin 1: Connect this with VDD Pin Pin 7: Unconnected Evaluation Board LC717A00AR01GEVB Figure 2. MM FT232H Connection Figure 3. Red Turns On by Touching Green Light CAUTION: When supplying power from Multifunctional conversion module while having Power switch jumper on AC ADAPTER side, Green LED will slightly light up. This is because the current flows via I 2 C signal line and Pull-up resistor. PLEASE DO NOT USE IN THIS CONDITION It may cause equipment failure. Also, please DO NOT supply power from both AD adapter and Multifunctional USB conversion module while having Power switch jumper on AC ADAPTER side This may also cause equipment failure. LC717A00AR02GEVB Evaluation Board This Evaluation board has 8 1 switch pattern with an acrylic board placed on top of it. Touching the acrylic board will turn Red LED light on. Configuration 1. Connector for Multifunctional USB I 2 C conversion module: A connector to connect MM FT232H. By connecting this module, user can connect this Evaluation board with PC. By connecting this board to PC and activating Touch sensor Evaluation application LC717A00AR software on PC, user can change the parameter of touch sensor LSI, or can monitor an operation condition. Also, power will be supplied from this connector. 2. RESET switch: This is used to RESET Capacitance touch sensor LSI. Press this when error LED is lit or any abnormality is found during operation. 3. Error LED: This will light up when error is occurring in Capacitance touch sensor LSI. When this LED is lit, press RESET switch to release an error. 4. Capacitance Touch sensor LSI: Please do not touch this during operation It may cause malfunction or breakdown. 5. Touch Switch Area: An area where Touch switch is located. Touch switch is Green at power ON. When the user touches the Green light, touch sensor will react and the color changes to Red. 3
4 How to Use 1. Connect MM FT232H (See Figure 2). 2. Press RESET switch. 3. Red LED will light up by touching silk prints on the board. 4. Press RESET switch if error LED is lit or when Evaluation board is operating strange. 5. Please note: If the user directly touches the IC on the Evaluation board or patterns with their finger, it may cause malfunction or breakdown. Connector for MM FT232H Error LED LED RESET Switch Touch Switch Area Figure 4. Configuration of LC717A00AR02GEVB LC717A00AR03GEVB Evaluation Board This Evaluation board has 4 2 switch pattern with an acrylic board placed on back side of the board. Red LED will light up by touching silk print area (SW1 ~ SW8) of the Touch switch. Configuration 1. Pin for Multi-functional USB conversion module: This is a pin to solder Pin header of 2.54 mm pitch and connect MM FT232H. By connecting this module, parameter change of Touch sensor LSI and the operation condition can be monitored by using Touch sensor evaluation application LC717A00AR Software on PC. 2. USB Connector: This is used for PC connection. This connector does power delivery only and PC does not identify this connector as USB device. In case of using LC717A00AR Software, please use pins for MM FT232H. 3. Error LED: This will light up when error is occurring in Capacitance touch sensor LSI. When this LED is lit, unplug Evaluation board from PC and plug back again. 4. Capacitance Touch sensor LSI: Please do not touch this during operation It may cause malfunction or breakdown. 5. Touch Switch Area, LED: An area where Touch switch is located. Red LED will light up by touching silk print area (SW1 ~ SW8) of the Touch switch. How to Use 1. Connect USB connector of the Evaluation board to USB connector of the PC. 2. Red LED light will light up by touching silk print on the board. 3. When error LED is on or having strange Evaluation board operation, unplug the Evaluation board from PC, and plug back again. 4. Please note: If the user directly touches the IC on the Evaluation board or patterns with their finger, it may cause malfunction or breakdown. 4
5 Pin for MM FT232H LED Error LED USB Connector Touch Switch Area Figure 5. Configuration of LC717A00AR03GEVB LC717A00ARGPGEVB Conversion Module This is a sensor module with Capacitance touch sensor LSI LC717A00AR on DIP IC form of board that has 28 pins with 600 mil width. This is used to evaluate self-produced switch patterns. Power LED MM FT232H Multifunctional USB I 2 C Conversion Module This is a module for USB Interface and I 2 C Interface conversion. This is used when connecting each Evaluation board and PC. When connecting to the Evaluation board, please set I/O switching jumper on 5 V side. USB Connector Reset Switch Connector for Evaluation Board Connection Figure 6. LC717A00ARGPGEVB I/O Power Switching Jumper Figure 7. Configuration of MM FT232H Please refer to Detail Description of LC717A00ARGPGEVB section for more detail. 5
6 Main specifications of each device are as listed below: LC717A00ARGEVK MAIN SPECIFICATIONS Table 1. MAIN SPECIFICATIONS OF LC717A00AR01GEVB Parameter Conditions Remarks Board Size (mm) Board Material Glass Epoxy (FR4) Copper Foil 35 m, Thickness 1.6 mm, Double-sided Board Supply Voltage 5 V Provided from either DC Jack or MM FT232H External RESET Circuit Switch Pattern Connector LC717A00AR With Manual REWSET Switch 4 2 Configuration 6 Pins 1 Row, DC Jack Table 2. MAIN SPECIFICATIONS OF LC717A00AR02GEVB Board Size Parameter Conditions Remarks (mm) Board Material Glass Epoxy (FR4) Copper Foil 35 m, Thickness 1.6 mm, Double-sided Board Supply Voltage 5 V Provided from MM FT232H External RESET Circuit Switch Pattern Connector LC717A00AR With Manual REWSET Switch 8 1 Configuration 6 Pins 1 Row Table 3. MAIN SPECIFICATIONS OF LC717A00AR03GEVB Board Size Parameter Conditions Remarks (mm) Board Material Glass Epoxy (FR4) Copper Foil 35 m, Thickness 1.6 mm, Double-sided Board Supply Voltage 5 V Provided from USB Connector External RESET Circuit Switch Pattern Connector LC717A00AR N/A 4 2 Configuration USB A Type Table 4. MAIN SPECIFICATIONS OF LC717A00ARGPGEVB Board Size Parameter Conditions Remarks (mm) Board Material Glass Composite (CEM3) Copper Foil 35 m, Thickness 1.6 mm, Double-sided Board Supply Voltage External RESET Circuit Switch Pattern Connector 2.6 to 5.5 V LC717A00AR With Manual REWSET Switch 4 2 Configuration Connector 600 mil Width 28 Pins DIP Type 6
7 CIRCUIT DIAGRAMS Unpopulated Figure 8. LC717A00AR01GEVB 7
8 Unpopulated Figure 9. LC717A00AR02GEVB 8
9 Figure LC717A00AR03GEVB 9
10 Figure 12. LC717A00ARGPGEVB 10
11 DETAIL DESCRIPTION OF LC717A00ARGPGEVB Configuration Power LED Touch Sensor LSI (LC717A00AR) RESET Switch Figure 13. Configuration of LC717A00ARGPGEVB 11
12 Table 5. SIGNAL PIN FUNCTIONS No Name I/O Functions 1 Pout7 Output Cin0 Evaluation Result Output 2 Pout6 Output Cin1 Evaluation Result Output 3 Pout5 Output Cin2 Evaluation Result Output 4 Pout4 Output Cin3 Evaluation Result Output 5 Pout3 Output Cin4 Evaluation Result Output 6 Pout2 Output Cin5 Evaluation Result Output 7 Pout1 Output Cin6 Evaluation Result Output 8 Pout0 Output Cin7 Evaluation Result Output 9 ERROR Output ERROR State Output 10 Cref Input Reference Capacity Input Pin 11 Cdrv Output Output for Capacitive Sensor Drive 12 INTOUT Output Interruption Output 13 GAIN Input Pin for Gain Initial Value Selection (JP1 Initialization : H Level = 14) 14 GND GND (EARTH) 15 Vdd Power Source 16 SCL/SCK Input Clock Input (I 2 C)/Clock Input (SPI) (2.2 k Pull-up) 17 SDA/SI I/O Data I/O (I 2 C)/Data Input (SPI) (2.2 k Pull-up) 18 SA/SO I/O Slave Address Selection (I 2 C)/Data Output (SPI) (JP2 Initialization : L Level) 19 CS Input Interface Selection/Chip Select Inverting Input (SPI) 20 RESET Input External RESET Signal Inverting Input (2.2 k Pull-up, with Switch) 21 Cin0 I/O Capacitive Sensor Input 22 Cin1 I/O Capacitive Sensor Input 23 Cin2 I/O Capacitive Sensor Input 24 Cin3 I/O Capacitive Sensor Input 25 Cin4 I/O Capacitive Sensor Input 26 Cin5 I/O Capacitive Sensor Input 27 Cin6 I/O Capacitive Sensor Input 28 Cin7 I/O Capacitive Sensor Input *For evaluation result output of Pout0~7; Evaluation result (ON/OFF) after removing Capacitive sensor input s chattering will come out. Capacitive sensor s measurement will become readable by connecting I 2 C compatible bus or SPI. Table 6. JUMPER, PATTERN FOR ADDITIONAL PARTS Pattern Parameter Set Contents JP1 Initial Gain Setting H Level (1-2 Short) = High-sensitivity ( 14) *: Initial Setting: H Level L Level (2-3 Short) = Low-sensitivity ( 7) JP2 Slave Address Selection (I 2 C) / Data Output (SPI) C3 Pattern for Cref Capacity Adjustment When Interface is Selected as I 2 C Compatible Bus by CS Pin; H Level (2-3 Short) = 0x16 (7 Bits) L Level (1-2 Short) = 0x17 (7 Bits) *: Initial Setting: L Level Implement Capacitor of any Capacity as Needed (Size: 1608) 12
13 PRECAUTION FOR USE 1. For more information on the Touch Sensor or how to design a custom switch pattern: Please refer to the Application and Design Note on the ON Semiconductor homepage. 2. Auto OFF Function: As a fail safe the LSI has an initial setting to turn OFF outputs if switch is held for a long period of time. Output will turn OFF after holding a switch for 10 seconds. By using Switch ON Count Lower/Higher Register in I 2 C compatible bus or SPI connection, the time to set OFF will be adjustable. Windows is a registered trademark of Microsoft Corporation ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC s product/patent coverage may be accessed at Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado USA Phone: or Toll Free USA/Canada Fax: or Toll Free USA/Canada orderlit@onsemi.com N. American Technical Support: Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: Japan Customer Focus Center Phone: ON Semiconductor Website: Order Literature: For additional information, please contact your local Sales Representative EVBUM2149/D
NCP1090GEVB, NCP1094GEVB. Power-over-Ethernet PD Interface Evaluation Board User's Manual EVAL BOARD USER S MANUAL. http://onsemi.
NCP1090GEVB, NCP1094GEVB Power-over-Ethernet PD Interface Evaluation Board User's Manual Introduction The NCP1090GEVB and NCP1094GEVB evaluation boards are designed to showcase the features of the NCP109x
ESD9X3.3ST5G Series, SZESD9X3.3ST5G Series. Transient Voltage Suppressors Micro Packaged Diodes for ESD Protection
ESD9X3.3ST5G Series, SZESD9X3.3ST5G Series Transient Voltage Suppressors Micro Packaged Diodes for ESD Protection The ESD9X Series is designed to protect voltage sensitive components from ESD. Excellent
AND9190/D. Vertical Timing Optimization for Interline CCD Image Sensors APPLICATION NOTE
Vertical Timing Optimization for Interline CCD Image Sensors APPLICATION NOTE Introduction This application note applies to the ON Semiconductor Interline CCD Image Sensors listed in Table 1. On these
2N2222A. Small Signal Switching Transistor. NPN Silicon. MIL PRF 19500/255 Qualified Available as JAN, JANTX, and JANTXV. http://onsemi.com.
Small Signal Switching Transistor NPN Silicon Features MILPRF19/ Qualified Available as JAN, JANTX, and JANTXV COLLECTOR MAXIMUM RATINGS (T A = unless otherwise noted) Characteristic Symbol Value Unit
MCR08B, MCR08M. Sensitive Gate Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 0.8 AMPERES RMS 200 thru 600 VOLTS
MCR8B, MCR8M Sensitive Gate Silicon Controlled Rectifiers Reverse Blocking Thyristors PNPN devices designed for line powered consumer applications such as relay and lamp drivers, small motor controls,
2N4921G, 2N4922G, 2N4923G. Medium-Power Plastic NPN Silicon Transistors 1.0 AMPERE GENERAL PURPOSE POWER TRANSISTORS 40 80 VOLTS, 30 WATTS
,, Medium-Power Plastic NPN Silicon Transistors These highperformance plastic devices are designed for driver circuits, switching, and amplifier applications. Features Low Saturation Voltage Excellent
2N6056. NPN Darlington Silicon Power Transistor DARLINGTON 8 AMPERE SILICON POWER TRANSISTOR 80 VOLTS, 100 WATTS
NPN Darlington Silicon Power Transistor The NPN Darlington silicon power transistor is designed for general purpose amplifier and low frequency switching applications. High DC Current Gain h FE = 3000
ESD7484. 4-Line Ultra-Large Bandwidth ESD Protection
4-Line Ultra-Large Bandwidth ESD Protection Functional Description The ESD7484 chip is a monolithic, application specific discrete device dedicated to ESD protection of the HDMI connection. It also offers
AND8326/D. PCB Design Guidelines for Dual Power Supply Voltage Translators
PCB Design Guidelines for Dual Power Supply Voltage Translators Jim Lepkowski ON Semiconductor Introduction The design of the PCB is an important factor in maximizing the performance of a dual power supply
AND8336. Design Examples of On Board Dual Supply Voltage Logic Translators. Prepared by: Jim Lepkowski ON Semiconductor. http://onsemi.
Design Examples of On Board Dual Supply Voltage Logic Translators Prepared by: Jim Lepkowski ON Semiconductor Introduction Logic translators can be used to connect ICs together that are located on the
MC14008B. 4-Bit Full Adder
4-Bit Full Adder The MC4008B 4bit full adder is constructed with MOS PChannel and NChannel enhancement mode devices in a single monolithic structure. This device consists of four full adders with fast
Device Application Topology Efficiency Input Power Power Factor THD NSIC2030JB, NSIC2050JB R4 Q2 Q1 R9
120 V AC, Low Cost, Dimmable, Linear, Parallel to Series with Switch In CCR LED Lighting Circuit DESIGN NOTE Table 1. DEVICE DETAILS Device Application Topology Efficiency Input Power Power Factor THD
Vdc. Vdc. Adc. W W/ C T J, T stg 65 to + 200 C
2N6284 (NPN); 2N6286, Preferred Device Darlington Complementary Silicon Power Transistors These packages are designed for general purpose amplifier and low frequency switching applications. Features High
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007. Axial Lead Standard Recovery Rectifiers
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007 Axial ead Standard Recovery Rectifiers This data sheet provides information on subminiature size, axial lead mounted rectifiers for general purpose
AND8365/D. 125 kbps with AMIS-4168x APPLICATION NOTE
125 kbps with AMIS-4168x Introduction Question Is it possible to drive 125kB with the AMIS 41682? Please consider all possible CAN bit timings (TSEG1, TSEG2, SJW), a capacitive load at each can pin about
NUD4011. Low Current LED Driver
NUD0 Low LED Driver This device is designed to replace discrete solutions for driving LEDs in AC/DC high voltage applications (up to 00 V). An external resistor allows the circuit designer to set the drive
LC898300XA. Functions Automatic adjustment to the individual resonance frequency Automatic brake function Initial drive frequency adjustment function
Ordering number : A2053 CMOS LSI Linear Vibrator Driver IC http://onsemi.com Overview is a Linear Vibrator Driver IC for a haptics and a vibrator installed in mobile equipments. The best feature is it
NUD4001, NSVD4001. High Current LED Driver
NUD, NSVD High Current LED Driver This device is designed to replace discrete solutions for driving LEDs in low voltage AC DC applications. V, V or V. An external resistor allows the circuit designer to
P2N2222ARL1G. Amplifier Transistors. NPN Silicon. These are Pb Free Devices* Features. http://onsemi.com
Amplifier Transistors NPN Silicon Features These are PbFree Devices* MAXIMUM RATINGS (T A = 25 C unless otherwise noted) Characteristic Symbol Value Unit CollectorEmitter Voltage V CEO 4 CollectorBase
120 V AC, Low Cost, Dimmable, Linear, Parallel to Series LED Driving Circuit http://onsemi.com
120 V AC, Low Cost, Dimmable, Linear, Parallel to Series LED Driving Circuit DESIGN NOTE Table 1. DEVICE DETAILS Device Application Topology Input Voltage Input Power Power Factor THD NSIC2030B LED Lighting
Prepared by: Paul Lee ON Semiconductor http://onsemi.com
Introduction to Analog Video Prepared by: Paul Lee ON Semiconductor APPLICATION NOTE Introduction Eventually all video signals being broadcasted or transmitted will be digital, but until then analog video
BC337, BC337-25, BC337-40. Amplifier Transistors. NPN Silicon. These are Pb Free Devices. http://onsemi.com. Features MAXIMUM RATINGS
BC337, BC337-25, BC337-4 Amplifier Transistors NPN Silicon Features These are PbFree Devices COLLECTOR MAXIMUM RATINGS Rating Symbol alue Unit 2 BASE Collector Emitter oltage CEO 45 dc Collector Base oltage
NTMS4920NR2G. Power MOSFET 30 V, 17 A, N Channel, SO 8 Features
NTMS9N Power MOSFET 3 V, 7 A, N Channel, SO Features Low R DS(on) to Minimize Conduction Losses Low Capacitance to Minimize Driver Losses Optimized Gate Charge to Minimize Switching Losses These Devices
CS8481. 3.3 V/250 ma, 5.0 V/100 ma Micropower Low Dropout Regulator with ENABLE
3.3 /250 ma, 5.0 /100 ma Micropower Low Dropout Regulator with The CS8481 is a precision, dual Micropower linear voltage regulator. The switched 3.3 primary output ( OUT1 ) supplies up to 250 ma while
MMBZ52xxBLT1G Series, SZMMBZ52xxBLT3G. Zener Voltage Regulators. 225 mw SOT 23 Surface Mount
MMBZ5xxBLTG Series, SZMMBZ5xxBLTG Series Zener Voltage Regulators 5 mw SOT Surface Mount This series of Zener diodes is offered in the convenient, surface mount plastic SOT package. These devices are designed
AND8433/D. Using ON Semiconductor Constant Current Regulator (CCR) Devices in AC Applications APPLICATION NOTE
Using ON Semiconductor Constant Current Regulator (CCR) Devices in AC Applications Introduction This update includes additional information on 220 V ac lighting circuits with the addition of ON Semiconductors
LC03-6R2G. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces. SO-8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 2 kw PEAK POWER 6 VOLTS
Low Capacitance Surface Mount TVS for High-Speed Data terfaces The LC3- transient voltage suppressor is designed to protect equipment attached to high speed communication lines from ESD, EFT, and lighting.
TIP140, TIP141, TIP142, (NPN); TIP145, TIP146, TIP147, (PNP) Darlington Complementary Silicon Power Transistors
TIP140, TIP141, TIP142, (); TIP145, TIP146, TIP147, () Darlington Complementary Silicon Power Transistors Designed for generalpurpose amplifier and low frequency switching applications. Features High DC
DN05034/D. Enhanced PWM LED Dimming DESIGN NOTE
Enhanced PWM LED Dimming Circuit Description The NCL30051LEDGEVB LED driver evaluation board provides PWM dimming capability via gating the resonant half bridge converter on and off at the PWM rate. Effective
BC327, BC327-16, BC327-25, BC327-40. Amplifier Transistors. PNP Silicon. These are Pb Free Devices* http://onsemi.com. Features MAXIMUM RATINGS
BC327, BC327-16, BC327-25, BC327-4 Amplifier Transistors PNP Silicon Features These are PbFree Devices* MAXIMUM RATINGS Rating Symbol Value Unit CollectorEmitter Voltage V CEO 45 Vdc CollectorEmitter Voltage
MMSZxxxT1G Series, SZMMSZxxxT1G Series. Zener Voltage Regulators. 500 mw SOD 123 Surface Mount
MMSZxxxTG Series, SZMMSZxxxTG Series Zener Voltage Regulators 5 mw SOD 3 Surface Mount Three complete series of Zener diodes are offered in the convenient, surface mount plastic SOD 3 package. These devices
MMBF4391LT1G, SMMBF4391LT1G, MMBF4392LT1G, MMBF4393LT1G. JFET Switching Transistors. N Channel
LT1G, SLT1G, LT1G, LT1G JFET Switching Transistors NChannel Features S Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AECQ1 Qualified and PPAP Capable
BC546B, BC547A, B, C, BC548B, C. Amplifier Transistors. NPN Silicon. Pb Free Packages are Available* Features. http://onsemi.com MAXIMUM RATINGS
B, A, B, C, B, C Amplifier Transistors NPN Silicon Features PbFree Packages are Available* COLLECTOR MAXIMUM RATINGS Collector - Emitter oltage Collector - Base oltage Rating Symbol alue Unit CEO 65 45
MPSA92, MPSA93. High Voltage Transistors. PNP Silicon. Pb Free Packages are Available* Features. http://onsemi.com MAXIMUM RATINGS MARKING DIAGRAM
MPSA92, High Voltage Transistors PNP Silicon Features PbFree Packages are Available* MAXIMUM RATINGS CollectorEmitter Voltage CollectorBase Voltage Rating Symbol Value Unit MPSA92 MPSA92 V CEO V CBO 200
CM1213A-04SO, SZCM1213A-04SO 4-Channel Low Capacitance ESD Protection Array
CM1213A-04SO, SZCM1213A-04SO 4-Channel Low Capacitance ESD Protection Array Product Description CM1213A 04SO has been designed to provide ESD protection for electronic components or subsystems requiring
1SMB59xxBT3G Series, SZ1SMB59xxT3G Series. 3 Watt Plastic Surface Mount Zener Voltage Regulators
9xxBTG Series, SZ9xxTG Series Watt Plastic Surface Mount Zener Voltage Regulators This complete new line of W Zener diodes offers the following advantages. Features Zener Voltage Range. V to V ESD Rating
2N3903, 2N3904. General Purpose Transistors. NPN Silicon. Pb Free Packages are Available* Features. http://onsemi.com MAXIMUM RATINGS
N393, General Purpose Transistors NPN Silicon Features PbFree Packages are Available* MAXIMUM RATINGS Rating Symbol Value Unit CollectorEmitter Voltage V CEO 4 Vdc CollectorBase Voltage V CBO 6 Vdc EmitterBase
CAT4101TV. 1 A Constant-Current LED Driver with PWM Dimming
A Constant-Current LED Driver with PWM Dimming Description The CAT4 is a constant current sink driving a string of high brightness LEDs up to A with very low dropout of.5 V at full load. It requires no
2N5460, 2N5461, 2N5462. JFET Amplifier. P Channel Depletion. Pb Free Packages are Available* Features. http://onsemi.com MAXIMUM RATINGS
2N546, 2N5461, JFET Amplifier PChannel Depletion Features PbFree Packages are Available* MAXIMUM RATINGS Rating Symbol Value Unit Drain Gate Voltage V DG 4 Vdc Reverse Gate Source Voltage V GSR 4 Vdc Forward
2N4401. General Purpose Transistors. NPN Silicon. Pb Free Packages are Available* http://onsemi.com. Features MAXIMUM RATINGS THERMAL CHARACTERISTICS
General Purpose Transistors NPN Silicon Features PbFree Packages are Available* MAXIMUM RATINGS Rating Symbol Value Unit Collector Emitter Voltage V CEO 4 Vdc Collector Base Voltage V CBO 6 Vdc Emitter
MPS2222, MPS2222A. NPN Silicon. Pb Free Packages are Available* http://onsemi.com. Features MAXIMUM RATINGS MARKING DIAGRAMS THERMAL CHARACTERISTICS
, is a Preferred Device General Purpose Transistors NPN Silicon Features PbFree Packages are Available* COLLECTOR 3 MAXIMUM RATINGS CollectorEmitter Voltage CollectorBase Voltage Rating Symbol Value Unit
NLSX4378. 4-Bit 24 Mb/s Dual-Supply Level Translator
4-Bit 24 Mb/s Dual-Supply Level Translator The NLSX4378 is a 4 bit configurable dual supply bidirectional auto sensing translator that does not require a directional control pin. The I/O and I/O ports
1N59xxBRNG Series. 3 W DO-41 Surmetic 30 Zener Voltage Regulators
W DO-4 Surmetic 0 Zener Voltage Regulators This is a N9xxBRNG series with limits and excellent operating characteristics that reflect the superior capabilities of silicon oxide passivated junctions. All
2N6387, 2N6388. Plastic Medium-Power Silicon Transistors DARLINGTON NPN SILICON POWER TRANSISTORS 8 AND 10 AMPERES 65 WATTS, 60-80 VOLTS
2N6388 is a Preferred Device Plastic MediumPower Silicon Transistors These devices are designed for generalpurpose amplifier and lowspeed switching applications. Features High DC Current Gain h FE = 2500
AND8360. AMIS-42700 Multiple CAN Bus Network APPLICATION NOTE
AMIS-42700 Multiple CAN Bus Network APPLICAION NOE Introduction his application note describes how a multiple CAN bus network can be made by usg AMIS-42700. A customer application is taken as an example.
LB1836M. Specifications. Monolithic Digital IC Low-Saturation Bidirectional Motor Driver for Low-Voltage Drive. Absolute Maximum Ratings at Ta = 25 C
Ordering number : EN397F LB136M Monolithic Digital IC Low-Saturation Bidirectional Motor Driver for Low-Voltage Drive http://onsemi.com Overview The LB136M is a low-saturation two-channel bidirectional
NUP2105L, SZNUP2105L. Dual Line CAN Bus Protector SOT 23 DUAL BIDIRECTIONAL VOLTAGE SUPPRESSOR 350 W PEAK POWER
Dual Line CAN Bus Protector The SZ/NUP215L has been designed to protect the CAN transceiver in high speed and fault tolerant networks from ESD and other harmful transient voltage events. This device provides
BC546B, BC547A, B, C, BC548B, C. Amplifier Transistors. NPN Silicon. Pb Free Package is Available* Features. http://onsemi.com MAXIMUM RATINGS
B, A, B, C, B, C Amplifier Transistors NPN Silicon Features PbFree Package is Available* COLLECTOR 1 2 BASE MAXIMUM RATINGS Collector-Emitter oltage Collector-Base oltage Rating Symbol alue Unit CEO 65
2N3903, 2N3904. General Purpose Transistors. NPN Silicon. Features Pb Free Package May be Available. The G Suffix Denotes a Pb Free Lead Finish
N393, N393 is a Preferred Device General Purpose Transistors NPN Silicon Features PbFree Package May be Available. The GSuffix Denotes a PbFree Lead Finish MAXIMUM RATINGS Rating Symbol Value Unit CollectorEmitter
AND8480/D. CrM Buck LED Driver Evaluation Board APPLICATION NOTE
CrM Buck LED Driver Evaluation Board Prepared by: Fabien Franc ON Semiconductor Introduction This document describes the CrM Buck LED driver evaluation board. This board provides a step down converter
3EZ6.2D5 Series. 3 Watt DO-41 Surmetic 30 Zener Voltage Regulators
EZ6.D Series Watt DO- Surmetic Zener Voltage Regulators This is a complete series of Watt Zener diodes with limits and excellent operating characteristics that reflect the superior capabilities of silicon-oxide
AND9015. A Solution for Peak EMI Reduction with Spread Spectrum Clock Generators APPLICATION NOTE. Prepared by: Apps Team, BIDC ON Semiconductor
A Solution for Peak EMI Reduction with Spread Spectrum Clock Generators Prepared by: Apps Team, BIDC ON Semiconductor APPLICATION NOTE Introduction This application note will outline Spread Spectrum Clock
LOW POWER SCHOTTKY. http://onsemi.com GUARANTEED OPERATING RANGES ORDERING INFORMATION
The TTL/MSI SN74LS151 is a high speed 8-input Digital Multiplexer. It provides, in one package, the ability to select one bit of data from up to eight sources. The LS151 can be used as a universal function
2N3906. General Purpose Transistors. PNP Silicon. Pb Free Packages are Available* http://onsemi.com. Features MAXIMUM RATINGS
2N396 General Purpose Transistors PNP Silicon Features PbFree Packages are Available* COLLECTOR 3 MAXIMUM RATINGS Rating Symbol Value Unit Collector Emitter Voltage V CEO 4 Vdc Collector Base Voltage V
C106 Series. Sensitive Gate Silicon Controlled Rectifiers
C6 Series Sensitive Gate Silicon Controlled Rectifiers Reverse Blocking Thyristors Glassivated PNPN devices designed for high volume consumer applications such as temperature, light, and speed control;
http://onsemi.com MARKING DIAGRAMS LOGIC DIAGRAM PDIP 16 P SUFFIX CASE 648 DIP PIN ASSIGNMENT ORDERING INFORMATION CDIP 16 L SUFFIX CASE 620
The MC10 is a dual master slave dc coupled J K flip flop. Asynchro nous set (S) and reset (R) are provided. The set and reset inputs override the clock. A common clock is provided with separate J K inputs.
CS3341, CS3351, CS387. Alternator Voltage Regulator Darlington Driver
Alternator Voltage Regulator Darlington Driver The CS3341/3351/387 integral alternator regulator integrated circuit provides the voltage regulation for automotive, 3 phase alternators. It drives an external
AND8008/D. Solid State Control Solutions for Three Phase 1 HP Motor APPLICATION NOTE
Solid State Control Solutions for Three Phase 1 HP Motor APPLICATION NOTE INTRODUCTION In all kinds of manufacturing, it is very common to have equipment that has three phase motors for doing different
How To Fit A 2Mm Exposed Pad To A Dfn Package
EVERSPIN s New 2mm Exposed Pad DFN Package Meets Both SOIC-8 and DFN8 PCB Layouts This Application Note is to inform Everspin customers that a new, DFN8 package with a 2mm bottom exposed pad has been added
MC14175B/D. Quad Type D Flip-Flop
Quad Type D Flip-Flop The MC475B quad type D flipflop is cotructed with MOS Pchannel and Nchannel enhancement mode devices in a single monolithic structure. Each of the four flipflops is positiveedge triggered
BSP52T1 MEDIUM POWER NPN SILICON SURFACE MOUNT DARLINGTON TRANSISTOR
Preferred Device This NPN small signal darlington transistor is designed for use in switching applications, such as print hammer, relay, solenoid and lamp drivers. The device is housed in the SOT-223 package,
LM350. 3.0 A, Adjustable Output, Positive Voltage Regulator THREE TERMINAL ADJUSTABLE POSITIVE VOLTAGE REGULATOR
3. A, able Output, Positive Voltage Regulator The is an adjustable threeterminal positive voltage regulator capable of supplying in excess of 3. A over an output voltage range of 1.2 V to 33 V. This voltage
NSI45060JDT4G. Adjustable Constant Current Regulator & LED Driver. 45 V, 60 100 ma 15%, 2.7 W Package
NSI5JDTG Adjustable Constant Current Regulator & Driver 5 V, ma 5%, 2.7 W Package The adjustable constant current regulator (CCR) is a simple, economical and robust device designed to provide a cost effective
NUP4106. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces SO 8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 500 WATTS PEAK POWER 3.
Low Capacitance Surface Mount TVS for High-Speed Data Interfaces The NUP0 transient voltage suppressor is designed to protect equipment attached to high speed communication lines from ESD and lightning.
AND8132/D. Performance Improvements to the NCP1012 Evaluation Board APPLICATION NOTE
Performance Improvements to the NCP0 Evaluation Board Prepared by: Bc. Jan Grulich EMEA Application Lab SCG CDC Roznov, Czech Republic APPLICATION NOTE This application note uses the standard NCP0 evaluation
Flexible Active Shutter Control Interface using the MC1323x
Freescale Semiconductor Document Number: AN4353 Application Note Rev. 0, 9/2011 Flexible Active Shutter Control Interface using the MC1323x by: Dennis Lui Freescale Hong Kong 1 Introduction This application
NCT65. Remote Trip Point Temperature Sensor with Overtemperature Shutdown
Remote Trip Point Temperature Sensor with Overtemperature Shutdown Description The is a low power temperature monitor housed in an MSOP8 package. It monitors the temperature of a remote thermal diode.
NS3L500. 3.3V, 8-Channel, 2:1 Gigabit Ethernet LAN Switch with LED Switch
3.3V, 8-Channel, : Gigabit Ethernet LAN Switch with LED Switch The NS3L500 is a 8 channel : LAN switch with 3 additional built in SPDT switches for LED routing. This switch is ideal for Gigabit LAN applications
AMIS-42673. High-Speed 3.3 V Digital Interface CAN Transceiver
AMIS-43 High-Speed 3.3 V Digital Interface CAN Transceiver Description The AMIS 43 CAN transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus. It
MBR2045CT SCHOTTKY BARRIER RECTIFIER 20 AMPERES 45 VOLTS
Preferred Device... using the Schottky Barrier principle with a platinum barrier metal. These state of the art devices have the following features: Guardring for Stress Protection Low Forward Voltage 150
1.5SMC6.8AT3G Series, SZ1.5SMC6.8AT3G Series. 1500 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*
.6.8AT3G Series, SZ.6.8AT3G Series 00 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The series is designed to protect voltage sensitive components from high voltage, high energy transients.
1SMA5.0AT3G Series, SZ1SMA5.0AT3G Series. 400 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional
.AT3G Series, SZ.AT3G Series 4 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional The series is designed to protect voltage sensitive components from high voltage, high energy transients.
MC74AC138, MC74ACT138. 1-of-8 Decoder/Demultiplexer
-of-8 Decoder/Demultiplexer The MC74AC38/74ACT38 is a high speed of 8 decoder/demultiplexer. This device is ideally suited for high speed bipolar memory chip select address decoding. The multiple input
CM2009. VGA Port Companion Circuit
VGA Port Companion Circuit Product Description The CM2009 connects between a video graphics controller embedded in a PC, graphics adapter card or set top box and the VGA or DVI I port connector. The CM2009
MC10SX1190. Fibre Channel Coaxial Cable Driver and Loop Resiliency Circuit
Fibre Channel Coaxial Cable Driver and Loop Resiliency Circuit Description The MC10SX1190 is a differential receiver, differential transmitter specifically designed to drive coaxial cables. It incorporates
PQ-MDS-T1 Module. HW Getting Started Guide. Contents. About This Document. Required Reading. Definitions, Acronyms, and Abbreviations
HW Getting Started Guide PQ-MDS-T1 Module April 2006: Rev. 0.3 Contents Contents................................................................................. 1 About This Document.......................................................................
Local Interconnect Network (LIN) Physical Interface
Freescale Semiconductor Engineering Bulletin EB215 Rev. 1.0, 03/2005 Local Interconnect Network (LIN) Physical Interface Difference Between MC33399 and MC33661 Introduction This engineering bulletin highlights
NLX1G74. Single D Flip-Flop
NG74 Single D Flip-Flop The NG74 is a high performance, full function edge triggered D Flip Flop in ultra small footprint. The NG74 input structures provide protection when voltages up to 7. are applied,
Genesi Pegasos II Setup
Freescale Semiconductor Application Note AN2666 Rev. 0, 07/2004 Genesi Pegasos II Setup by Maurie Ommerman CPD Applications Freescale Semiconductor, Inc. Austin, TX This application note is the first in
TIP41, TIP41A, TIP41B, TIP41C (NPN); TIP42, TIP42A, TIP42B, TIP42C (PNP) Complementary Silicon Plastic Power Transistors
TIP41, TIP41A, TIP41B, TIP41C (NPN); TIP42, TIP42A, TIP42B, TIP42C (PNP) Complementary Silicon Plastic Power Transistors Designed for use in general purpose amplifier and switching applications. Features
CAT4109, CAV4109. 3-Channel Constant-Current RGB LED Driver with Individual PWM Dimming
3-Channel Constant-Current RGB LED Driver with Individual PWM Dimming Description The CAT419/CAV419 is a 3 channel constant current LED driver, requiring no inductor. LED channel currents up to 175 ma
AND9035/D. BELASIGNA 250 and 300 for Low-Bandwidth Applications APPLICATION NOTE
BELASIGNA 250 and 300 for Low-Bandwidth Applications APPLICATION NOTE Introduction This application note describes the use of BELASIGNA 250 and BELASIGNA 300 in low bandwidth applications. The intended
This document explains various evaluations of digital audio interface receiver LC89091JA.
LC8909JAGEVK LC8909JA Digital Audio Interface Receiver Test Procedure http://onsemi.com This document explains various evaluations of digital audio interface receiver LC8909JA. Table of Contents. Function
SN74LS74AMEL. Dual D Type Positive Edge Triggered Flip Flop LOW POWER SCHOTTKY
SN74S74A ual Type Positive Edge Triggered Flip Flop The SN74S74A dual edge-triggered flip-flop utilizes Schottky TT circuitry to produce high speed -type flip-flops. Each flip-flop has individual clear
Spread Spectrum Clock Generator
Spread Spectrum Clock Generator Features Generates a 1x (PCS3P5811), x (PCS3P581) and 4x() low EMI spread spectrum clock of the input frequency Provides up to 15dB of EMI suppression Input Frequency: 4MHz
NLSX4401. 1-Bit 20 Mb/s Dual-Supply Level Translator
1-Bit 20 Mb/s Dual-Supply Level Translator The NLSX4401 is a 1bit configurable dualsupply bidirectional auto sensing translator that does not require a directional control pin. The I/O and ports are designed
NE592 Video Amplifier
Video Amplifier The NE is a monolithic, two-stage, differential output, wideband video amplifier. It offers fixed gains of and without external components and adjustable gains from to with one external
Using the High Input Voltage Charger for Single Cell Li-Ion Batteries (KIT34671EPEVBE)
Freescale Semiconductor User s Guide Document Number: KT3467UG Rev..0, 3/008 Using the High Input Voltage Charger for Single Cell Li-Ion Batteries (KIT3467EPEVBE) Purpose This User Guide helps the Lithium-Ion
LOW POWER SCHOTTKY. http://onsemi.com GUARANTEED OPERATING RANGES ORDERING INFORMATION PLASTIC N SUFFIX CASE 648 SOIC D SUFFIX CASE 751B
The SN74LS47 are Low Power Schottky BCD to 7-Segment Decoder/ Drivers consisting of NAND gates, input buffers and seven AND-OR-INVERT gates. They offer active LOW, high sink current outputs for driving
1N5820, 1N5821, 1N5822. Axial Lead Rectifiers SCHOTTKY BARRIER RECTIFIERS 3.0 AMPERES 20, 30, 40 VOLTS
1N58, 1N5821, 1N5822 1N58 and 1N5822 are Preferred Devices Rectifiers This series employs the Schottky Barrier principle in a large area metal-to-silicon power diode. State-of-the-art geometry features
CP2110-EK CP2110 EVALUATION KIT USER S GUIDE. 1. Kit Contents. 2. Relevant Documentation. 3. Software Setup
CP2110 EVALUATION KIT USER S GUIDE 1. Kit Contents The CP2110 Evaluation Kit contains the following items: CP2110 Evaluation Board RS232 Serial Cable USB Cable DVD Quick Start Guide 2. Relevant Documentation
Using WinUSB in a Visual Studio Project with Freescale USB device controller
Freescale Semiconductor Document Number: AN4378 Application Note Rev. 0, 10/2011 Using WinUSB in a Visual Studio Project with Freescale USB device controller by: Paolo Alcantara Microcontroller Solutions
NCP432, NCP433. 1.5A Ultra-Small Controlled Load Switch with Auto-Discharge Path
1.5 Ultra-Small Controlled Load Switch with uto-discharge Path The NCP2 and NCP are a low Ron MOSFET controlled by external logic pin, allowing optimization of battery life, and portable device autonomy.
DATASHEET. ADAM Arduino Display Adaptor Module. Arduino Compatible Shield P/N: 4Display-Shield-FT843 For the 4D Systems 4DLCD-FT843 Display
DATASHEET ADAM Arduino Display Adaptor Module Arduino Compatible Shield P/N: 4Display-Shield-FT843 For the 4D Systems 4DLCD-FT843 Display Document Date: 8 th January 2014 Document Revision: 1.0 Uncontrolled
Programming Audio Applications in the i.mx21 MC9328MX21
Freescale Semiconductor Application Note Document Number: AN2628 Rev. 1, 10/2005 Programming Audio Applications in the MC9328MX21 by: Alfred Sin 1 Abstract The MC9328MX21 () processor has two dedicated
Hardware Configurations for the i.mx Family USB Modules
Freescale Semiconductor Application Note Document Number: AN4136 Rev. 0, 06/2010 Hardware Configurations for the i.mx Family USB Modules by Multimedia Applications Division Freescale Semiconductor, Inc.
Windows 7: Using USB TAP on a Classic CodeWarrior Installation (MGT V9.2 DSC V8.3)
Freescale Semiconductor Document Number: AN4338 Application Note Rev. 1.0, 12/2011 Windows 7: Using USB TAP on a Classic CodeWarrior Installation (MGT V9.2 DSC V8.3) Technical Information & Commercial
STF202-22. USB Filter with ESD Protection
STF202-22 USB Filter with ESD Protection This device is designed for applications requiring Line Termination, EMI Filtering and ESD Protection. It is intended for use in upstream USB ports, ellular phones,
AN588 ENERGY HARVESTING REFERENCE DESIGN USER S GUIDE. 1. Kit Contents. 2. Introduction. Figure 1. Energy Harvesting Sensor Node
ENERGY HARVESTING REFERENCE DESIGN USER S GUIDE 1. Kit Contents The RF to USB Reference Design contains the following items: Si1012 Energy Harvesting Wireless Sensor Node EZRadioPRO USB Dongle ToolStick
ic-mq EVAL MQ1D EVALUATION BOARD DESCRIPTION
Rev A3, Page 1/7 ORDERING INFORMATION Type Order Designation Description and Options Evaluation Board ic-mq EVAL MQ1D ic-mq Evaluation Board ready to operate, accessible through GUI via PC adapter Software