Chip Resistors CR, LCR and ULCR
|
|
|
- Roland Stokes
- 7 years ago
- Views:
Transcription
1 Chip Resistors CR, LCR and ULCR Features Flat Chip Resistors for surface mount applications LCR and ULCR for current sensing applications L Dimensions C C C C w T * L (Length) Inches.16 ±.8 (.4 ±.2).24 ±.2 (.6 ±.5). ±.2 (1. ±.5).63 ±.4 (1.6 ±.1).79 ±.6 (2. ±.15).126 ±.6 (3.2 ±.15).126 ±.6 (3.2 ±.15).197 ±.6 (5. ±.15).248 ±.6 (6.3 ±.15) W (Width) Inches.8 ±.8 (.2 ±.2).12 ±.1 (.3 ±.2).2 ±.1 (.5 ±.2).31 ±.4 (.8 ±.1).5 ±.6 (1.25 ±.15).63 ±.6 (1.6 ±.15).98 ±.6 (2.5 ±.15).98 ±.6 (2.5 ±.15).126 ±.6 (3.2 ±.15) T (Thickness) Inches.5 ±.8 (.13 ±.2).1 ±.2 (.25 ±.5).14 ±.2 (.35 ±.5).18 ±.4 (.45 ±.1).18 ±.6 (.45 ±.15) C (End Band) Inches.3 ±.1 (.8 ±.3).6 ±.2 (.15 ±.5).8 ±.4 (.2 ±.1).12 ±.6 (.3 ±.15).14 ±.6 (.35 ±.15).2 ±.8 (.5 ±.2).2 ±.8 (.5 ±.2).24 ±.8 (.6 ±.2).24 ±.8 (.6 ±.2) CR Series 3 2 Structure LCR Series 3 2 * ULCR. See page Description 1 Substrate Alumina 2 Resistive element Ruthenium Oxide (RuO 2 ) 3 Protective coating Boro-Silicate Glass 4 Inner termination Silver Palladium (Ag-Pd) 5 Inner Plating Nickel (Ni) Description 1 Substrate Alumina 2 Resistive element Silver Palladium (Ag-Pd) 3 Protective coating Boro-Silicate Glass 4 Inner termination Silver Palladium (Ag-Pd) 5 1st Plating Copper (Cu) 6 Outer Plating Solder Plating, 1% matte Tin (Sn) 6 2nd Plating Nickel (Ni) 7 3rd Plating Solder Plating, 1% matte Tin (Sn) For standard resistance values, please see EIA Standard Values on page 59.
2 CR Standard Chip Resistors Specifications Series Power Rating at 7 C Max. Working Voltage Zero (ohm) Current Rating Range CR15-3W.3W PR or 15V whichever is less.5a CR21-2W.5W PR or 25V whichever is less.5a Zero, 1Ω - 1Meg Ω Only available in 5% tolerance Zero, 1Ω - 1Meg Ω E-12 (1.2Meg Ω - 1Meg Ω) CR2-16W.63W PR or 5V whichever is less 1A Zero, 1Ω - 1MegΩ CR63-16W.63W PR or 5V whichever is less 1A Zero, 1Ω - 22Meg Ω CR63-1W.1W PR or 5V whichever is less 1A Zero, 1Ω - 22Meg Ω CR85-1W.1W PR or 15V whichever is less 2A Zero, 1Ω - 22Meg Ω CR85-8W.125W PR or 15V whichever is less 2A Zero, 1Ω - 22Meg Ω CR126-8W.125W PR or 2V whichever is less 2A Zero, 1Ω - 22Meg Ω CR126-4W.25W PR or 2V whichever is less 2A Zero, 1Ω - 22Meg Ω CR121-4W.25W PR or 2V whichever is less 4A Zero, 1Ω - 1Meg Ω CR121-2W.5W PR or 2V whichever is less 4A Zero, 1Ω - 1Meg Ω CR21-2W.5W PR or 2V whichever is less 5A Zero, 1Ω - 1Meg Ω CR21-1W 1.W PR or 2V whichever is less 5A Zero, 1Ω - 1Meg Ω CR2512-1W 1.W PR or 2V whichever is less 5A Zero, 1Ω - 1Meg Ω CR2512-2W 2.W PR or 2V whichever is less 5A Zero, 1Ω - 1Meg Ω Operating Temp. Range is -55 C to +155 C DC Value of zero ohm is 5m ohms max. 41
3 Chip Resistors LCR Low Value Chip Resistors Specifications Series Power Rating At 7 C (W) Rated Current Range (A) Range (mω) LCR LCR LCR LCR LCR LCR LCR Specific Range (SRR) (mω) 5 1 Tolerance Available Temperature Coefficient of (PPM) (1-6 / C) ± ± ± ± ± ± ± ± ±2 5 9 ± ± ± ± ±2 Note: Other nominal resistance values may also be available, please contact VENKEL LTD. for further information. Standard resistance values and corresponding codes: Dielectric Withstanding Voltage (DWV) (V) Operating Temperature Range ( C) 1 55 ~ ~ m ohm R1 27m ohm R27 5m ohm R5 8m ohm R8 16m ohm R16 33m ohm R33 6m ohm R6 12m ohm R12 3m ohm R3 56m ohm R56 9m ohm R9 18m ohm R18 36m ohm R36 65m ohm R65 15m ohm R15 33m ohm R33 6m ohm R6 1m ohm R1 2m ohm R2 m ohm R 68m ohm R68 18m ohm R18 35m ohm R35 65m ohm R65 11m ohm R11 22m ohm R22 43m ohm R43 7m ohm R7 2m ohm R2 m ohm R 68m ohm R68 12m ohm R12 25m ohm R25 47m ohm R47 75m ohm R75 22m ohm R22 43m ohm R43 7m ohm R7 13m ohm R13 27m ohm R27 5m ohm R5 8m ohm R8 25m ohm R25 47m ohm R47 75m ohm R75 15m ohm R15 3m ohm R3 56m ohm R56 9m ohm R9 Marking for LCR: The resistance code shall be marked on the resistor as follows (this code is the same for 1% and 5% tolerances): 2 size: no markings 63 size: 3-digit markings using R and 2 digits. When R can not be used then 3 digits and underlined. (see below) size: 4-digit markings using R and 3 digits. Rxxx. R1 = 1m ohm, R12 = 12m ohm. Examples of 3-digit markings: R1 = 1m ohm 22 = 22m ohm 68 = 68m ohm R8 = 8m ohm R1 = 1m ohm 42
4 ULCR Ultra Low Value Chip Resistors Dimensions C Specifications Size (mω) T Power Rating At 7 C (W) L Tolerance Available w Temperature Coefficient of (PPM) (1-6 / C) Maximum Rated Current (A) 1% Matte Tin (Sn) Dimensions L W T C J ± ± ± ± ± F, J ± ± ± ± ± F, J ± ± ±.25.8 ± ± F, J ± ± ± ± ± F, J ± ± ±.25.5 ± ± F, J ± ± ± ± ± F, J ± ± ±.25.7 ± ± F, J ± ± ± ± ± F, J ± ± ±.25.6 ± ± F, J ± ± ± ± ± F, J ± ± ±.25.5 ± ± F, J ± ± ± ± ± F, J ± ± ±.25.5 ± ± F, J ± ± ± ± ± F, J ± ± ± ± ±.3 Marking Alloy Plate (MnCu) Polymer Protective Coating Copper Plating (Cu) Unit: Standard resistance values and corresponding codes: (mω) Marking (mω) Marking.5 M5 M5 4. 4M R4.75 M75 M M5 4M5 1. 1M R1 5. 5M R M5 1M M5 5M5 2. 2M R2 6. 6M R M5 2M M5 6M5 3. 3M R3 7. 7M R M5 3M5 Note: Other nominal resistance values may also be available, please contact VENKEL LTD. for further information. 43
5 Characteristics Item Test Basis: JIS-C-522 Specification Requirements Typical Short-time Overload 2.5 x rated voltage DC for 5 sec. ±1% +.5W, no arc evidence within ±.4% Load Life 7 C, rated voltage for 1.5 hrs. on/.5 hr. for 1 hrs. <1 meg. ±3% +.1W, > 1 meg. ±5% Dielectric Withstanding Voltage 5V for 1 minute No insulation breakdown above 9-95V to Soldering Heat 27 C for 1 seconds ±1% +.5W, no mechanical damage Temperature Cycling EIA STD. 575, Para ~ +125 C, 5 cycles. ± 1.% Solderability 23 C, 3 seconds, flux applied 95% minimum coverage more than 97-98% Curing Heat +15 C for 1 minutes ±1% +.5W within ±.3% Dry Heat -125 C for 1, hours ±3% +.1W, no mechanical damage within ±.5% Pull Terminal Strength 5G load for 3 seconds ±1% +.5W, no mechanical damage within ±.2% PCB Terminal Strength 1/45mm bend for 1 seconds ±1% +.5W, no mechanical damage within ±.2% Moisture, Thermal Shock -55 C to +125 C, 5 cycles ±1% +.5W, no mechanical damage within ±.2% Moisture Load Life C, 95% R.H., 1.5 hr. on,.5 hr. off, 1, hours <1 meg ±3% +.1W, > 1 meg. ±5% Insulation 5V, 1 minute 1, meg. minimum more than 1 Meg. Voltage Coefficient Rated voltage and 1/1 times rated voltage +/-1ppm/v: above 1K ± within - 9ppm/V Low Temperature Exposure -55 C for 1, hours ±3% +.1W, no mechanical damage within ±.5% T.C.R. Temperature Coefficient of ( ppm/ C) (For CR Series only) case sizes: G & J Tol.: ± 2 (1W 1 Meg. W); F & D Tol.: ± 1 (1W 1 Meg. W); D, F, G & J Tol.: ±35 (over 1 Meg. W) 21 case size: ± 2 for F and J Tol. (1W 1 Meg. W); TCR is ±35 for values outside referenced range 15 case size: + 6 ~ -2 for (4.7W 9.1W); ± 25 for (1W 1 Meg. W) 44
6 Derating Curves DERATINg CURVE (CR Only) DERATINg CURVE (LCR only) DERATINg CURVE (ULCR Only) Rated power (%) Ambient temperature ( C) Rated power (%) Ambient temperature ( C) Rated power (%) Ambient temperature ( C) How to order SERIES CR6-8W LCR85 ULCR5 J T Add only if 13" Reel required 3 DIGIT (G & J TOL.) e.g. 2R2=2.2W 13=1KW PACKAGING T: TAPE 4 DIGIT (D & F TOL.) Jumper LCR, ULCR 4 DIGIT (F, G & J TOL.) e.g. 1R2=1.2W 12=1kW 3 zero s e.g. 3M=3mW R22=22mW R33=33mW R12=12mW TOLERANCE AT 25 C D: ±.5% F: ± 1% G: ± 2% J: ± 5% (No Tolerance specified for the Zero Ohm) Leave blank for standard termination. Standard Chip Resistor Termination finish is 1% matte Tin (Sn). If a 1% Tin designation is required, add Sn. P: For Palladium Silver Termination (PdAg) add P above (CR Series only) 6 % Chip Resistors may not be marked. (For CR Series) Please consult your salesperson if marking is required. (See the data sheet on Marking s) * E-24 Standard values that are available in 1%, may be marked with the standard 3-digit code identifier or an alpha numeric code. For the alpha numeric marking see page 6 for details. * NOTE: 15, 21 and 2 Resistors cannot be marked. * NOTE: See page 59 for Standard Values Note: Other nominal resistance values may also be available, please contact your sales representative for further information. See page 59 for Standard Values. Please Note: Venkel offers Engineering Kits for this product. See page 117 for details. For standard resistance values, please see EIA Standard Values on page
Pulse Withstanding Thick Film Chip Resistor-SMDP Series. official distributor of
Product: Pulse Withstanding Thick Film Chip Resistor-SMDP Series Size: /// official distributor of Pulse Withstanding Thick Film Chip Resistor-SMDP Series 1. Scope -This specification applies to ~ sizes
Type RP73 Series. SMD High Power Precision Resistors. Key Features. Applications. Characteristics - Electrical - RP73 Series - Standard
Key Features n High precision - tolerances down to 0.05% n Low TCR - down to 5ppm/ C n Stable high frequency performance n Operating temperature -55 C to +155 C n Increased power rating - up to 1.0W n
WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors
WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxX_V12 Nov.- 2011
WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402
WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 10 ASC_WR_V23 APR.- 2015
DATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/0805/1206/2512. RoHS compliant & Halogen free
DATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/005/1206/2512 RoHS compliant & Halogen free Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE
DATA SHEET CHIP RESISTORS RT Series 1%; 0.5%; 0.25%; 0.1%
DATA SHEET CHIP RESISTORS Series 1%; 0.5%; 0.25%; 0.1% Product specification Supersedes Date of Sep. 30, 2003 ynsc004 ynsc015 ynsc002 ynsc007 2 SCOPE This specification describes series chip resistors
Power chip resistor size 2512 PRC221 5%; 2% FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability.
FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability. APPLICATIONS Power supplies Printers Computers Battery chargers Automotive Converters CD-ROM. QUICK
DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512
DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/005/ 1206/1210/121/2010/2512 Product specification August 22, 2014 V.0 Product specification 2 SCOPE This specification
TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 1206, 0805, 0603
WF2Q, WF08Q, WF06Q ±%, ±0.5%, ±0.25%, ±0.%, ±0.05% TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 206, 0805, 0603 *Contents in this sheet are subject to change without
Automotive and Anti-Sulfuration Chip Resistor 0402
The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the
DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0402 5%, 1% RoHS compliant & Halogen Free
DATA SHEET GENERAL PURPOSE CHIP RESISTORS 5%, 1% RoHS compliant & Halogen Free Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes series chip
SMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
SIL Resistor Network. Resistors. Electrical. Environmental. L Series. Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant
Resistors SIL Resistor Network Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2) Electrical Standard Resistance
DATA SHEET LOW OHMIC HIGH POWER CHIP RESISTORS RL-High power series 5%, 2%, 1% sizes 0805/1206
DATA SHEET LOW OHMIC HIGH POWER CHIP RESISTORS series 5%, 2%, 1% sizes 005/1206 RoHS compliant Product specification Aug 27, 200 V.2 Product specification 2 SCOPE This specification describes RL005/1206
High-ohmic/high-voltage resistors
FEATURES High pulse loading capability Small size. APPLICATIONS Where high resistance, high stability and high reliability at high voltage are required High humidity environment White goods Power supplies.
SPECIFICATION FOR APPROVAL. Approved by
C O N F I D E N T I A L D O C U M E N T SPECIFICATION FOR APPROVAL CONRAD Description : Royalohm Part no.: 0402WGxxxxxTCE (RMC 1/16W (0402) +/- 1%, 5% & Jumper) 0603SAxxxxxT5E (RMC 1/10W-S (0603) +/- 1%,
DATA SHEET ARRAY CHIP RESISTORS YC/TC 5%, 1% sizes YC:102/104/122/124/162/164/248/324/158/358 TC: 122/124/164
Product specification December 11, 2015 V.2 0 DATA SHEET ARRAY CHIP RESISTORS YC/TC 5%, 1% sizes YC:102/104/2/4/162/164/248/324/158/358 TC: 2/4/164 RoHS compliant Product specification 2 SCOPE This specification
High-ohmic/high-voltage resistors
FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS
Metal Film Resistors, Industrial, Precision
Metal Film Resistors, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Available Excellent high frequency characteristics Exceptionally
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
Thick Film Chip Resistors, Military/Established Reliability MIL-PRF-55342 Qualified, Type RM
Thick Film Chip Resistors, Military/Established Reliability -PRF-55342 Qualified, Type RM MATERIAL SPECIFICATIONS Resistive element Ruthenium oxide Encapsulation Epoxy Substrate 96 % alumina Termination
Metal Film Resistors, Non-Magnetic, Industrial, Precision
Metal Film Resistors, Non-Magnetic, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Excellent high frequency characteristics
Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications FEATURES AEC-Q200 qualified with PPAP available Available in 0402 to 1812 body size Three dielectric materials AgPd termination
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) Rotor. Wiper. Cover. Pin S T - 2 T A 1 0 0 Ω ( 1 0 1 )
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) COPAL ELECTRONICS RoHS compliant INTERNAL STRUCTURE 8 4 7! 5! 9 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7
Metal Film Resistors, Industrial, Precision
CMF Industrial Metal Film Resistors, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Excellent high frequency characteristics
ST-2 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) FEATURES PART NUMBER DESIGNATION S T - 2 T A 1 0 0 Ω ( 1 0 1 ) RoHS compliant
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) ST- RoHS compliant INTERNAL STRUCTURE 8 4 7 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7 8 9!! 5 Part name Housing
Thick Film Resistor Networks, Dual-In-Line, Molded DIP
Thick Film Resistor Networks, Dual-In-Line, Molded DIP FEATURES Isolated, bussed, and dual terminator schematics available 0.160" (4.06 mm) maximum seated height and rugged, molded case construction Thick
ESCC 4001/026 Qualified ( ) High Stability Thick Film Resistor Chips
ESCC 4001/026 Qualified ( ) High Stability Thick Film Resistor Chips thick film chip resistors are specially designed to meet the requirements of the ESA 4001/026 specification. They have undergone the
High Ohmic (up to 68 MΩ)/ High Voltage (up to 10 kv) Resistors
High Ohmic (up to 68 MΩ)/ A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to the end-caps.
Power Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
High Power Thick Film Chip Resistor 2512
Specifications: Type : MCHP12 Power Rating at 70 C : 2W Working Voltage : 250V Max. Overload Voltage : 500V Max. Dielectric Withstanding Voltage : 500V Temperature Range : -55 C to +155 C Ambient Temperature
50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High power to size ratio Non inductive element Material
Polymer Termination. Mechanical Cracking 2. The reason for polymer termination. What is Polymer Termination? 3
Polymer Termination An alternative termination material specifically designed to absorb greater levels of mechanical stress thereby reducing capacitor failures associated with mechanical cracking Mechanical
Part Marking Instructions Chip Resistors
Chip Resistors Part Marking Instructions Part Marking Instructions Chip Resistors 1% Marking The nominal resistance is marked on the surface of the overcoating with the use of 4 digit markings. 0201 and
Standard Thick Film Chip Resistors
Standard Thick Film Chip Resistors FEATURES Stability R/R = 1 % for 00 h at 70 C 2 mm pitch packaging option for size Pure tin solder contacts on Ni barrier layer provides compatibility with lead (Pb)-free
Carbon Film Fixed Resistor Axial Leaded
Features Automatically insertable High quality performance Non-Flame type available Cost effective and commonly used Too low or too high values can be supplied on case to case basis Performance Specification
FEATURES 200 % 175 % 150 % 125 % 100 % 75 % 50 % 25 %
Ultra High Precision Z-Foil Resistor with TCR of ± 0.05 ppm/ C, PCR of 5 ppm at Rated Power, Tolerance of ± 0.005 % and Load Life Stability of ± 0.005 % INDUSTRY BREAKTHROUGH Any value at any tolerance
High Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive
ATC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors
AC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors Features: Lowest ESR in Class Highest Working Voltage in class 250V Standard EIA Size: 0603 Laser Marking (Optional) RoHS Compliant High
High Ohmic/High Voltage Metal Glaze Leaded Resistors
VR37 High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded
Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ010 and RZ020 Dual-In-Line, Molded DIP
MDM (Military M831/1 and /2) Thick Film Resistor Networks, Military, MIL-PRF-831 Qualified, Type RZ1 and RZ2 Dual-In-Line, Molded DIP STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL/ PIN NO. MIL STYLE
High Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage FEATURES A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded to
Pulse Proof Thick Film Chip Resistors
Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
SMD PTC - Nickel Thin Film Linear Thermistors
SMD PTC - Nickel Thin Film Linear Thermistors Notes (1) Contact if closer TCR lot tolerance is desired. (2) Other R 25 -values and tolerances are available upon request. (3) Rated continuous working voltage
Types MC and MCN Multilayer RF Capacitors
High-Frequency, High-Power, High-Voltage Chips with Nonmagnetic Option Rugged flexibility and compatibility with FR4 boards make Type MC and MCN capacitors ideal for use where other multilayer caps aren
Metal Film Resistors, Military, MIL-R-10509 Qualified, Precision, Type RN and MIL-PRF-22684 Qualified, Type RL
Metal Film Resistors, Military, Qualified, Precision, Type RN and Qualified, Type RL FEATURES Very low noise (- 40 db) Very low voltage coefficient (5 ppm/v) Controlled temperature coefficient Flame retardant
Metal Film Resistors, Military, MIL-R-10509 Qualified, Type RN and MIL-PRF-22684 Qualified, Type RL
CMF (Military RN and RL) Metal Film Resistors, Military, Qualified, Type RN and Qualified, Type RL FEATURES Very low noise (- 40 db) Very low voltage coefficient (5 ppm/v) Controlled temperature coefficient
Precision Surface Mount Resistors Wirewound or Metal Film Technologies
Precision Surface Mount Resists irewound Metal Film Technologies FEATURES Accding to CECC 40402-801 (wirewound) ide range of ohmic values (0.04 to 1 M) Low temperature coefficient (± 25 ppm/ C available)
Pulse Proof, High Power Thick Film Chip Resistors
Pulse Proof, High Power Thick Film Chip Resistors STANDARD ELTRICAL SPIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P 70 W LIMITING ELEMENT VOLTAGE U max. AC/DC -HP e3 FTURES Excellent
Product Specification
Product Specification Model No.: DC-240-L01-00-TR Description: H=3.00mm Horizontal SMD DC Power Jacks Pin Shaft Diameter: 0.65mm Packing Method: Tape & Reel (600pcs./R) 1. General 1a. Scope The jacks should
Wirewound Resistors, Industrial Power, Aluminum Housed, Chassis Mount
Wirewound Resistors, Industrial Power, Aluminum Housed, hassis Mount FEATURES Molded construction for total environmental protection omplete welded construction Meets applicable requirements of MIL-PRF-18546
High Ohmic/High Voltage Metal Glaze Leaded Resistors
High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive
Product Specification Micro-SIM H1.24 Push-Pull Type 108. This specification covers the requirements for product performance, test methods and quality
Product Specification Micro-SIM H1.24 Push-Pull Type 108 09. Jan 13 1. Scope : 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions
Contents. 12. Lot Number 10. 13. Reel Packing Structure 11. 14. Precaution for Use 13. 15. Hazard Substance Analysis 14. 16. Revision History 18
Rev : 00 ISSUE NO : DATE OF ISSUE : 2009. 04. 10 S P E C I F I CATION MODEL : SLHNNWW629T1S0U0S0 [Rank : (S0), (U0), (S0)] HIGH POWER LED - SUNNIX6 CUSTOMER : CUSTOMER CHECKED CHECKED APPROVED SAMSUNG
EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Power LED 1W (Preliminary)
Technical Data Sheet High Power LED 1W (Preliminary) Features Feature of the device: small package with high efficiency Typical view angle: 150. Typical light flux output: 30 lm @ 350mA. ESD protection.
High Stability - High Temperature (230 C) Thin Film Wraparound Chip Resistors, Sulfur Resistant
High Stability - High Temperature (230 C) Thin Film Wraparound Chip Resistors, Sulfur Resistant INTRODUCTION For applications such as down hole applications, the need for parts able to withstand very severe
Power Dissipation Considerations in High Precision Vishay Sfernice Thin Film Chips Resistors and Arrays (P, PRA etc.) (High Temperature Applications)
VISHAY SFERNICE Resistive Products Application Note ABSTRACT On our thin film chips resistors and arrays the main path for the heat, more than 90 %, is conduction through the body of the component, the
Insulated Precision Wirewound Resistors Axial Leads
Insulated Precision Wirewound Resistors Axial Leads In wirewound precision resistors, the series holds a leading position in professional applications whenever an excellent stability of the ohmic value
1W High Power Purple LED Technical Data Sheet. Part No.: LL-HP60MUVA
1W High Power Purple LED Technical Data Sheet Part No.: LL-HP60MUVA Spec No.: HP60M Rev No.: V.2 Date: Aug./18/2009 Page: 1 OF 8 Features: Luckylight High power LED type. Lead frame type package (Heat
AZ420 MINIATURE GENERAL PURPOSE RELAY
MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 0 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available
Precision Leaded Resistors
FEATURES Approved according to CECC 40101-806 Advanced thin film technology Low TC: ± 15 to Precision tolerance of value: ± 0.1 % and ± 0.25 % Superior overall : class 0.05 Wide precision range: 10 Ω to
NARROW-PITCH (0.8mm) CONNECTORS P8 SERIES
Socket Header Compliance with RoHS Directive NRROW-PITCH CONNECTORS FOR PC ORDS 3. Perfect for portable devices, the bellows-type provide a strong resistance against falling, impacts, and forced insertions
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product Specification October 13, 11 V.8 Product
Metal Film Resistors, Industrial, Flameproof
End of Life - August 13 Metal Film Resistors, Industrial, Flameproof STANDARD ELECTRICAL SPECIFICATIONS FEATURES Small physical size Low cost resistors have the ability to withstand overloads up to times
Power Resistor for Mounting onto a Heatsink Thick Film Technology
DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series Non inductive Easy
Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC and 200 V DC
Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 5 V DC, 1 V DC and 2 V DC DESIGNING For more than 2 years Vitramon has supported the automotive industry
Thin Film Chip Resistors and Arrays for High Temperature Applications Up to +230 C
CARTS USA 2010, New Orleans, Louisiana, March 15-18, 2010 Thin Film Chip Resistors and Arrays for High Temperature Applications Up to +230 C By Dr. Claude Flassayer Vishay Sfernice ABSTRACT With their
Ultra low ohmic Metal plate / High power type Shunt Resistors
Ultra low ohmic Metal plate / High power type Shunt Resistors PSR Series Features 1) High power class up to 4 to 5W. 2) The lineup of ultra-low resistance value : correspondence from 0.2m 3) Excellent
3. ELECTRICAL PERFORMANCE PROPERTY TEST CONDITION PERFORMANCE 3. 1 Contact Resistance 1) Center Push 100mΩ Max
1. GENERAL 1. 1 Application : This specification is applied to MULTI WAY SWITCH for electronic equipment. 1. 2 Operating Temperature Range :-25 ~ 70 1. 3 Storage Temperature Range :-0 ~ 85. However, 96
Two Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts
Product Specification 108-19346 17 APR 2013 Rev F Two Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts 1. SCOPE 1.1. Content NOTE The product may not perform according
SLLP-5630-150-G PRODUCT DATASHEET. RoHS Compliant
PRODUCT DATASHEET SLLP-5630-150-G Table of Contents Features... 1 Applications 1 Characteristics.. 1 Typical Electro optical Characteristics Curves... 3 Mechanical Dimensions... 4 Carrier Tape Dimensions.....
P O W E R C A P A C I T O R A S S E M B L I E S
AMERICAN TECHNICAL CERAMICS P O W E R C A P A C I T O R A S S E M B L I E S ISO 9001 REGISTERED COMPANY Overview About ATC Power Assemblies ATC standard & custom Power Assemblies are fabricated from PARALLEL
Ultra Precision Metal Film Leaded Resistors
Ultra Precision Metal Film Leaded Resistors FEATURES Exceptional low TCR: ± 2 ppm/k to ± 10 ppm/k Super tight tolerance: ± 0.01 % to ± 0.25 % Exceptional overall stability: class 0.02 Wide resistance range:
Compliant Terminal Technology Summary Test Report
Engineering Report ER04100 October 5th, 2004 Revision A Copyright Autosplice Inc., September 2004 Table of Contents Summary Overview 3 Compliant Terminal Specifications 3 Test Plan 4 Test Conditions 4
High Ohmic/High Voltage Metal Film Leaded Resistors
, High Ohmic/High Voltage FEATURES Metal film technology High pulse loading (up to 10 kv) capability Small size (0207/0411) Compatible with lead (Pb)-free and lead containing soldering processes Compliant
MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Precision www.vishay.com. Precision Thin Film Chip Resistors
Precision Thin Film Chip Resistors FEATURES Rated dissipation P 70 up to 0.4 W for size 1206 AEC-Q200 qualified Approved to EN 140401-801 Superior temperature cycling robustness Sulfur resistance verified
SD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion
0.45mm Height 0402 Package Pure Green Chip LED Technical Data Sheet. Part No.: LL-S160PGC-G5-1B
.45mm Height 42 Package Pure Green Chip LED Technical Data Sheet Part No.: LL-S16PGC-G5-1B Spec No.: S16 Rev No.: V.2 Date: Dec./6/25 Page: 1 OF 9 Features: Package in 8mm tape on 7" diameter reel. Compatible
ZIF Connector & Flat Flexible Cable
ZIF Connector & Flat Flexible Cable 09/08-1 ZIF Connector & Flat Flexible Cable As the demand for higher density in electronic equipment increases, the use of Flexible Flat Cable (FFC) or Flexible Printed
SM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to from damage due to
DATA SHEET THICK FILM CHIP RESISTORS Introduction
DATA SHEET THICK FILM CHIP RESISTORS Introduction Product Specification Product specification 2 Chip Resistor Surface Mount Data in data sheets is presented - whenever possible -according to a 'format',
1SMB59xxBT3G Series, SZ1SMB59xxT3G Series. 3 Watt Plastic Surface Mount Zener Voltage Regulators
9xxBTG Series, SZ9xxTG Series Watt Plastic Surface Mount Zener Voltage Regulators This complete new line of W Zener diodes offers the following advantages. Features Zener Voltage Range. V to V ESD Rating
HLMP-1600, HLMP-1601, HLMP-1620, HLMP-1621 HLMP-1640, HLMP-1641, HLMP-3600, HLMP-3601 HLMP-3650, HLMP-3651, HLMP-3680, HLMP-3681
HLMP-16, HLMP-161, HLMP-162, HLMP-1621 HLMP-16, HLMP-161, HLMP-36, HLMP-361 HLMP-365, HLMP-3651, HLMP-368, HLMP-3681 T 1 3 / (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps Data Sheet
0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors.
0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors. FH Series (51pos. type) 3.45mm 17.1mm 0.9mm Features 1. Extremely light weight The largest version, with all contacts
FT-63 SINGLE TURN CERMET TRIMMERS FEATURES. PART NUMBER DESIGNATION F T - 6 3 E T V 5 k Ω ( 5 0 2 ) RoHS compliant
SINGLE TURN FT-6 RoHS compliant INTERNAL STRUCTURE 4 FEATURES RoHS compliant Resistance tolerance ± 0 % O ring sealed and washable Suitable for automatic insertion and automatic adjustment Increase in
RI-80 SMD Series Dry Reed Switch
formerly RI-80 SMD Series Dry Reed Switch RI-80 SMD Series Ultra-micro dry-reed switch hermetically sealed in a gas-filled glass envelope. Single-pole, single-throw (SPST) type, having normally open contacts,
Operating Temperature Range: -30 to +85ç (Note 1) Operating Humidity Range: 40 to 80%
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
How To Power A Power Control Microprocessor (Power Control) Microprocessor 2 (Power) (Power Power) (Control) (Repower) Microcontroller (Power/Reflow) (Mini) (Microprocessor) (Wired) (Wire
PTC NTC for Surface Mounting Application What is a Thermistor? Thermally Sensitive Resistor Thermistor Positive Temperature Coefficient PTC Negative Temperature Coefficient NTC Characteristics of Thermistors
For board-to-fpc. Narrow Pitch Connectors (0.35mm pitch)
For board-to-fpc Narrow Pitch Connectors (0.35mm pitch) S35 Series New FEATURES 1. 1.7 mm wide slim two-piece type connector Mated height 0.6 mm Smaller compared to A4F series Width: Approx. 44% down
SOC Understanding Overcurrent Circuit Protectors
SOC Understanding Overcurrent Circuit Protectors Carl E.Lindquist VP New Product Development San-O Industrial Corporation Introduction to Overcurrent Circuit Protectors Overcurrent (Series) vs. Overvoltage
High Surge Axial Cemented Wirewound Resistors
High Surge Axial Cemented Wirewound Resistors FEATURES High voltage surge (up to 12 kv) withstanding capability Non flammable silicon cement coating High grade ceramic core Material categorization: for
08. SEK IDC CONNECTORS
. IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these
1.50mm Height 2220 Package Top View Full Color Chip LEDs Technical Data Sheet. Part No.: LL-R5050RGBC-001
.5mm Height 222 Package Top View Full Color Chip LEDs Technical Data Sheet Part No.: LL-R55RGBC- Spec No.: R55 Rev No.: V.2 Date: Mar./6/26 Page: OF 2 Features: P-LCC-6 package. White package. Optical
Professional Thin Film MELF Resistors
,, - Professional Professional Thin Film MELF Resistors, and professional thin film MELF resistors are the perfect choice for most fields of rn professional electronics where reliability and stability
What is surface mount?
A way of attaching electronic components to a printed circuit board The solder joint forms the mechanical and electrical connection What is surface mount? Bonding of the solder joint is to the surface
FEATURES BODY DIA. MAX. Type M AWG 30: 0.0100 [0.254] Type C AWG 28: 0.0126 [0.320] Type T AWG 30: 0.0100 [0.254]
![FEATURES BODY DIA. MAX. Type M AWG 30: 0.0100 [0.254] Type C AWG 28: 0.0126 [0.320] Type T AWG 30: 0.0100 [0.254]](/thumbs/30/14198675.jpg "FEATURES BODY DIA. MAX. Type M AWG 30: 0.0100 [0.254] Type C AWG 28: 0.0126 [0.320] Type T AWG 30: 0.0100 [0.254]")
M, C, T NTC Thermistors, Coated FEATURES Small size - conformally coated. Wide resistance range. Available in 11 different R-T curves. DESCRIPTION Models M, C, and T are conformally coated, leaded thermistors
High Ohmic / High Voltage Metal Glaze Leaded Resistors
High Ohmic / High Voltage Metal Glaze Leaded Resistors A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper
3M Pin Strip Header Single and Dual Row.100,.235 /.318 Mating Length, Straight & Right Angle, Solder Tails 929 Series
M Pin Strip Header Single and Dual Row.100,.25 /.18 Mating Length, &, Solder Tails 929 Series Stackable Gold, Matte Sn, or -Lead plating options High Temperature (PCT) plastic for Wave or IR soldering
SPECIFICATION. Topview 5550 SMD LED IWS 505-RB. Product : Topview 5550 SMD LED Part No : IWS-505-RB Customer : Date : 2007. 11. 10 Ver.1.0.
SPECIFICATION Product : Topview 555 SMD LED Part No : Customer : Date : 27.. Ver.. Customer : Approval Manufacturer : ITSWELL Co., LTD Proposed By Approval Comment Suwon Company : 442-9, 82 Uman Industrial