DeltaV Bulk Power Supplies
|
|
|
- Susan Haynes
- 7 years ago
- Views:
Transcription
1 DeltaV Distributed Control System Product Data Sheet DeltaV Bulk Power Supplies DeltaV 5 A,10 A, 20 A and 40 A Bulk Power Supplies DeltaV 20 A, 40 A and 80 A Bulk Power Supply Redundancy Modules. Easy to use Flexible and cost effective Low Footprint Introduction Power your system won t operate without it. DeltaV Bulk Power Supplies offer you the most efficient and reliable power solution for your money. The DeltaV Bulk Power Supply suite provides power to the system electronics and to the field. This is all the power required for your DeltaV system. Benefits Easy to use. The DeltaV Bulk Power Supplies provide reliable 12 and 24 VDC power for your DeltaV system power and bussed field power needs. They mount easily onto a T-type DIN rail easy! Flexible and cost effective. The DeltaV Bulk Power Supplies are flexible to use and cost effective, as external redundancy modules can be applied, for example, if load sharing is desired. Low Footprint. The new DeltaV Bulk Power Supplies provide very competitive low footprints!
2 Hardware Specifications Operational Temperature Common Environmental Specifications -25 C to + 70 C (-13 to 158 F) Output derating may be required. Storage Temperature -40 C to + 85 C (-40 to 185 F) Relative Humidity 5 to 95%, non-condensing Protection Rating IP20, NEMA 12 Airborne Contaminants ISA-S airborne contaminants class G3, Conformal coating. Shock 15 g ½ sign wave for 6 ms, 10 g ½ sign wave for 11 ms. Vibration 1.6 mm peak to peak from Hz; 2 g from 17.8 to 500 Hz. Mounting Mount only on horizontally-oriented DIN Rail, with label text right-side up. Required Spacing 40 mm on top, 20 mm on the bottom, 5 mm on both sides. Required Spacing Between Multiple Units 15 mm on each side adjacent to another Bulk PS. 2
3 DeltaV Bulk Power Supply VAC to 12 VDC, 15 A DeltaV Bulk AC to 12 VDC, 15 A Power Supply Specifications Output Voltage Output Voltage Adjustment Range Output Current Output Power Output Ripple Output Hold-up Time 12 VDC VDC A continuous A for 4 seconds (typical) 180 W continuous 270 W for 4 seconds (typical) < 50 mv peak-to-peak at 20 Hz to 20 MHz AC input - 72 ms typical at 100 VAC, 12V, 7.5 A - 31 ms typical at 100 VAC, 12V, 15 A - 72 ms typical at 120 VAC, 12V, 7.5 A - 32 ms typical at 120 VAC, 12V, 15 A - 72 ms typical at 230 VAC, 12V, 7.5 A - 32 ms typical at 230 VAC, 12V, 15 A DC input - 31 ms typical at 110 VDC Operational Temperature Range -25 C to + 70 C Output Derating at Higher Temperature AC Input Voltage 5 W/ C at +60 C to +70 C VAC ±15%, single-phase AC Mains Frequency Hz ± 6% AC Input Current AC Power Factor AC Inrush Current (Over Entire Temperature Range) AC Efficiency AC Losses DC Input Voltage DC Input Current DC Power Factor DC Inrush Current DC Efficiency 1.65 A at 120 VAC 0.93 A at 230 VAC 0.98 A at 120 VAC 0.92 A at 230 VAC 10 A peak maximum at 100 VAC 5 A peak typical at 100 VAC 10 A peak maximum at 120 VAC 4 A peak typical at 120 VAC 10 A peak maximum at 230 VAC 7 A peak typical at 230 VAC 91.5% at 120 VAC 91.8% at 230 VAC 16.7 W at 120 VAC 16.1 W at 230 VAC 110 to 150 VDC -20%/+25% single-phase 1.78 A at 110 VDC 1 or N/A at 110 VDC 10 A peak maximum 5 A peak typical 91.0% at 110 VDC 3
4 DC Losses Input Protection Alarm Relay Contact Rating Dimensions Weight 17.8 W at 110 VDC Internally fused, non-replaceable fuses. Note: The internal fuse is for an internal fault condition only. Shorts and overload will not cause the fuse to fail. 60 VDC at 0.3 A, 30 VDC at 1 A, 30 VAC at 0.5 A Height (max): 12.4 cm (4.9 in.) Width (max): 6.0 cm (2.4 in.) Depth (max): 11.7 cm (4.6 in.) 1.98 lb (0.9 kg) Approvals CSA certified to C22.2 No CE EN61326 UL 508, ATEX, IEC-EX and wiring Bistable, quick-connect spring-clamp terminals with IP20 finger-safe construction are used. The terminals are shipped in the open position and suitable for field installation. Wire Type Input Output DC-OK-Signal Solid Wire mm 2 Stranded Wire mm mm mm mm mm 2 4
5 DeltaV Bulk Power Supply VAC to 24 VDC, 5 A DeltaV Bulk AC to 24 VDC, 5 A Power Supply Specifications Output Voltage Output Voltage Adjustment Range Output Current Output Power Output Ripple Output Hold-up Time 24 VDC VDC A continuous A for 4 seconds (typical) 120 W continuous 180 W for 4 seconds (typical) < 50 mv peak-to-peak at 20 Hz to 20 MHz AC input - 66 ms typical at 100 VAC, 24 V, 2.5 A - 34 ms typical at 100 VAC, 24 V, 5 A - 66 ms typical at 120 VAC, 24 V, 2.5 A - 34 ms typical at 120 VAC, 24 V, 5 A ms typical at 230 VAC, 24 V, 2.5 A - 65 ms typical at 230 VAC, 24 V, 5 A DC input - 34 ms typical at 110 VDC Operational Temperature Range -25 C to + 70 C Output Derating at Higher Temperature AC Input Voltage 3 W/ C at +60 C to +70 C VAC -15% / +10%, single-phase AC Mains Frequency Hz ± 6% AC Input Current AC Power Factor AC Inrush Current (Over Entire Temperature Range) AC Efficiency AC Losses DC Input Voltage DC Input Current DC Power Factor DC Inrush Current DC Efficiency 1.10 A at 120 VAC 0.62 A at 230 VAC 0.99 A at 120 VAC 0.91 A at 230 VAC 15 A peak maximum at 100 VAC 8 A peak typical at 100 VAC 15 A peak maximum at 120 VAC 9 A peak typical at 120 VAC 15 A peak maximum at 230 VAC 11 A peak typical at 230 VAC 91.0% at 120 VAC 92.7% at 230 VAC 11.0 W at 120 VAC 9.4 W at 230 VAC VDC ±20%, single-phase 1.19 A at 110 VDC 1 or N/A at 110 VDC 15 A peak maximum 8 A peak typical 91.0% at 110 VDC 5
6 DC Losses Input Protection Alarm Relay Contact Rating Dimensions Weight 11.9 W at 110 VDC Internally fused, non-replaceable fuses. Note: The internal fuse is for an internal fault condition only. Shorts and overload will not cause the fuse to fail. 60 VDC at 0.3 A, 30 VDC at 1 A, 30 VAC at 0.5 A Height (max): 12.4 cm (4.9 in.) Width (max): 4 cm (1.6 in.) Depth (max): 11.7 cm (4.6 in.) 1.37 lb (0.62 kg) Approvals CSA certified to C22.2 No CE EN61326 UL 508, ATEX, IEC-EX and wiring Bistable, quick-connect spring-clamp terminals with IP20 finger-safe construction are used. The terminals are shipped in the open position and suitable for field installation. Wire Type Input Output DC-OK-Signal Solid Wire mm mm AWG mm AWG Stranded Wire mm mm AWG mm AWG 6
7 DeltaV Bulk Power Supply VAC to 24 VDC, 10 A DeltaV Bulk AC to 24 VDC, 10 A Power Supply Specifications Output Voltage Output Voltage Adjustment Range Output Current Output Power Output Ripple Output Hold-Up Time 24 VDC VDC 10-9 A continuous A for 4 seconds (typical) 240 W continuous 360 W for 4 seconds (typical) < 50 mv peak-to-peak at 20 Hz to 20 MHz AC input Operational Temperature Range -25 C to + 70 C 51 ms typical at 100 VAC, 24 V, 5 A 26 ms typical at 100 VAC, 24 V, 10 A 53 ms typical at 120 VAC, 24 V, 5 A 27 ms typical at 120 VAC, 24 V, 10 A 55 ms typical at 230 VAC, 24 V, 5 A 28 ms typical at 230 VAC, 24 V, 10 A DC input 26 ms typical at 110 VDC Output Derating at Higher Temperature AC Input Voltage 6 W/ C at +60 C to +70 C VAC ±15%, single-phase AC Mains Frequency Hz ± 6% AC Input Current AC Power Factor AC Inrush Current (Over Entire Temperature Range) AC Efficiency AC Losses DC Input Voltage DC Input Current DC Power Factor DC Inrush Current 2.22 A at 120 VAC 1.22 A at 230 VAC 0.98 A at 120 VAC 0.92 A at 230 VAC 10 A peak maximum at 100 VAC 5 A peak typical at 100 VAC 10 A peak maximum at 120 VAC 4 A peak typical at 120 VAC 10 A peak maximum at 230 VAC 7 A peak typical at 230 VAC 92.6% at 120 VAC 93.5% at 230 VAC 19.1 W at 120 VAC 16.7 W at 230 VAC VDC -20%/+25%, single-phase 2.37 A at 110 VDC 1 or N/A at 110 VDC 10 A peak maximum 5 A peak typical 7
8 DC Efficiency DC Losses Input Protection Alarm Relay Contact Rating Dimensions Weight 91.8% at 110 VDC 21.4 W at 110 VDC Internally fused, non-replaceable fuses. Note: The internal fuse is for an internal fault condition only. Shorts and overload will not cause the fuse to fail. 60 VDC at 0.3 A, 30 VDC at 1 A, 30 VAC at 0.5 A Height (max): 12.5 cm (4.9 in.) Width (max): 6 cm (2.3 in.) Depth (max): 11.7 cm (4.6 in.) 1.98 lb (0.9 kg) Approvals CSA certified to C22.2 No CE EN61326 UL 508, ATEX, IEC-EX and wiring Bistable, quick-connect spring-clamp terminals with IP20 finger-safe construction are used. The terminals are shipped in the open position and suitable for field installation. Wire Type Input Output DC-OK-Signal Solid Wire mm 2 Stranded Wire mm mm mm mm mm 2 8
9 DeltaV Bulk Power Supply VAC to 24 VDC, 20 A DeltaV Bulk AC to 24 VDC, 20 A Power Supply Specifications Output Voltage Output Voltage Adjustment Range Output Current Output Power Output Ripple Output Hold-Up Time 24 VDC VDC A continuous A for 4 seconds (typical) 480 W continuous 720 W for 4 seconds (typical) < 100 mv peak-to-peak at 20 Hz to 20 MHz AC input Operational Temperature Range -25 C to + 70 C 64 ms typical at 100 VAC, 24 V, 10 A 32 ms typical at 100 VAC, 24 V, 20 A 64 ms typical at 120 VAC, 24 V, 10 A 32 ms typical at 120 VAC, 24 V, 20 A 99 ms typical at 230 VAC, 24 V, 10 A 51 ms typical at 230 VAC, 24 V, 20 A DC input 32 ms typical at 110 VDC Output Derating at Higher Temperature AC Input Voltage 12 W/ C at +60 C to +70 C VAC ±15%, single-phase AC Mains Frequency Hz ± 6% AC Input Current AC Power Factor AC Inrush Current (Over Entire Temperature Range) AC Efficiency AC Losses DC Input Voltage DC Input Current DC Power Factor DC Inrush Current 4.56 A at 120 VAC 2.48 A at 230 VAC 0.95 A at 120 VAC 0.90 A at 230 VAC 13 A peak maximum at 100 VAC 11 A peak typical at 100 VAC 13 A peak maximum at 120 VAC 9 A peak typical at 120 VAC 13 A peak maximum at 230 VAC 7 A peak typical at 230 VAC 92.4% at 120 VAC 93.9% at 230 VAC 39.6 W at 120 VAC 31.4 W at 230 VAC VDC -20%/+25%, single-phase 4.6 A at 110 VDC 1 or N/A at 110 VDC 13 A peak maximum 10 A peak typical 9
10 DC Efficiency DC Losses Input Protection Alarm Relay Contact Rating Dimensions Weight 92% at 110 VDC 41.8 W at 110 VDC Internally fused, non-replaceable fuses. Note: The internal fuse is for an internal fault condition only. Shorts and overload will not cause the fuse to fail. 60 VDC at 0.3 A, 30 VDC at 1 A, 30 VAC at 0.5 A Height (max): 12.4 cm (4.9 in.) Width (max): 8.2 cm (3.2 in.) Depth (max): 12.7 cm (5 in.) 2.65 lb (1.2 kg) Approvals CSA certified to C22.2 No CE EN61326 UL 508, ATEX, IEC-EX and wiring Bistable, quick-connect spring-clamp terminals with IP20 finger-safe construction are used. The terminals are shipped in the open position and suitable for field installation. Wire Type Input Output DC-OK-Signal Solid Wire mm 2 Stranded Wire mm mm mm mm AWG mm AWG 10
11 DeltaV Bulk Power Supply VAC to 24 VDC, 40 A DeltaV Bulk AC to 24 VDC, 40 A Power Supply Specifications Output Voltage Output Voltage Adjustment Range Output Current Output Power Output Ripple Output Hold-Up Time 24 VDC VDC A continuous A for 4 seconds (typical) 960 W continuous 1440 W for 4 seconds (typical) < 100 mv peak-to-peak at 20 Hz to 20 MHz AC input Operational Temperature Range -25 C to + 70 C 54 ms typical at 100 VAC, 24 V, 20 A 27 ms typical at 100 VAC, 24 V, 40 A 54 ms typical at 120 VAC, 24 V, 20 A 27 ms typical at 120 VAC, 24 V, 40 A 54 ms typical at 230 VAC, 24 V, 20 A 27 ms typical at 230 VAC, 24 V, 40 A Output Derating at Higher Temperature AC Input Voltage 24 W/ C at +60 C to +70 C VAC -15%/+10%, single-phase AC Mains Frequency Hz ± 6% AC Input Current AC Power Factor AC Inrush Current (Over Entire Temperature Range) AC Efficiency AC Losses Input Protection Alarm Relay Contact Rating 8.6 A at 120 VAC 4.5 A at 230 VAC 0.99 A at 120 VAC 0.99 A at 230 VAC 25 A peak maximum at 100 VAC 18 A peak typical at 100 VAC 22 A peak maximum at 120 VAC 16 A peak typical at 120 VAC 16 A peak maximum at 230 VAC 9 A peak typical at 230 VAC 93.6% at 120 VAC 94.6% at 230 VAC 65.6 W at 120 VAC 54.8 W at 230 VAC Internally fused, non-replaceable fuses. Note: The internal fuse is for an internal fault condition only. Shorts and overload will not cause the fuse to fail. 60 VDC at 0.3 A, 30 VDC at 1 A, 30 VAC at 0.5 A 11
12 Dimensions Weight Height (max): 12.4 cm (4.9 in.) Width (max): 12.5 cm (4.92 in.) Depth (max): 12.7 cm (5 in.) 4.2 lb (1.9 kg) Approvals CSA certified to C22.2 No CE EN61326 UL 508, ATEX, IEC-EX and wiring Wire Type Input Screw Output Screw DC-OK-Signal Solid Wire mm 2 Stranded Wire mm mm AWG mm AWG mm AWG mm AWG 12
13 DeltaV Bulk Power Supply Redundancy Module, 12 VDC to 48 VDC, 20 A Redundancy Module 12 to 48 VDC, 20 A Specifications Input Voltage VDC ± 25% Input Voltage Range Input Current Output Current Input to Output Voltage Drop Power Losses Temperature Range Derating Dimensions Weight 9-60 VDC 2x 0-10 A continuous 2x 0-16 A for 5 seconds 0-20 A continuous A for 5 seconds 25 A continuous overload/short circuit 0.78 VDC at 2x 5 A input (typical) 0.85 VDC at 1x 10 A input (typical) 0.85 VDC at 2x 10 A input (typical) 0 W at no load (typical) 7.8 W at 2x 5 A input (typical) 8.5 W at 1x 10 A input (typical) 17 W at 2x 10 A input (typical) -40 C to +70 C operational 0.5 A / C at +60 C to +70 C Height (max): 12.4 cm (4.9 in.) Width (max): 3.2 cm (1.25 in.) Depth (max): 10.2 cm (4.0 in.) 0.64 lb (0.29 kg) Approvals CSA certified to C22.2 No CE EN61326 UL 508, ATEX, IEC-EX and wiring Bistable, quick-connect spring-clamp terminals with IP20 finger-safe construction are used. The terminals are shipped in the open position and suitable for field installation. Wire Type Input Output Solid Wire mm 2 Stranded Wire mm mm mm
14 DeltaV Bulk Power Supply Redundancy Module, 12 VDC to 28 VDC, 40 A Redundancy Module 12 to 28 VDC, 40 A Specifications Input Voltage VDC ± 30% Input Voltage Range Input Current Output Current Input to Output Voltage Drop Power Losses Temperature Range Dimensions Weight VDC 2x 0-20 A continuous 2x A for 5 seconds 0-40 A continuous A for 5 seconds 65 A continuous overload/short circuit 72 mv at 2x 10 A input (typical) 112 mv at 1x 20 A input (typical) 140 mv at 2x 20 A input (typical) 700 mw at no load (typical) 2.15 W at 2x 10 A input (typical) 2.65 W at 1x 20 A input (typical) 6.3 W at 2x 20 A input (typical) -40 C to +70 C operational, no derating required Height (max): 12.4 cm (4.9 in.) Width (max): 3.6 cm (1.4 in.) Depth (max): 12.7 cm (5.0 in.) 0.75 lb (0.34 kg) Approvals CSA certified to C22.2 No CE EN61326 UL 508, ATEX, IEC-EX and wiring Bistable, quick-connect spring-clamp terminals with IP20 finger-safe construction are used. The terminals are shipped in the open position and suitable for field installation. Wire Type Input Screw Output Screw Solid Wire mm 2 Stranded Wire mm mm AWG mm AWG 14
15 DeltaV Bulk Power Supply Redundancy Module, 12 VDC to 28 VDC, 80 A Redundancy Module 12 to 28 VDC, 80 A Specifications Input Voltage VDC ± 30% Input Voltage Range Input Current Output Current Input to Output Voltage Drop Power Losses Temperature Range Dimensions Weight VDC 2x 0-40 A continuous 2x A for 5 seconds 0-80 A continuous A for 5 seconds 130 A continuous overload/short circuit 49 mv at 2x 20 A input (typical) 85 mv at 1x 40 A input (typical) 95 mv at 2x 40 A input (typical) 700 mw at no load (typical) 2.7 W at 2x 20 A input (typical) 3.6 W at 1x 40 A input (typical) 8.3 W at 2x 40 A input (typical) -40 C to +70 C operational, no derating required Height (max): 12.4 cm (4.9 in.) Width (max): 4.6 cm (1.8 in.) Depth (max): 12.7 cm (5.0 in.) 0.97 lb (0.44 kg) Approvals CSA certified to C22.2 No CE EN61326 UL 508, ATEX, IEC-EX and wiring Bistable, quick-connect spring-clamp terminals with IP20 finger-safe construction are used. The terminals are shipped in the open position and suitable for field installation. and wiring Wire Type Input Screw Output Screw Solid Wire mm AWG Stranded Wire mm AWG mm AWG mm AWG 15
16 Ordering Information DeltaV Bulk Power Supply VAC to 12 VDC, 15 A with certifications for Hazardous Areas as well as Marine (GL) DeltaV Bulk Power Supply VAC to 24 VDC, 5 A with certifications for Hazardous Areas as well as Marine (GL) DeltaV Bulk Power Supply VAC to 24 VDC, 10 A with certifications for Marine (GL) (for Safe area installation only) DeltaV Bulk Power Supply VAC to 24 VDC, 10 A with certifications for Hazardous Areas as well as Marine (GL) DeltaV Bulk Power Supply VAC to 24 VDC, 20 A with certifications for Marine (GL) (for Safe area installation only) DeltaV Bulk Power Supply VAC to 24 VDC, 20 A with certifications for Hazardous Areas as well as Marine (GL) DeltaV Bulk Power Supply VAC to 24 VDC, 40 A with certifications for Marine (GL) (for Safe area installation only) DeltaV Bulk Power Supply VAC to 24 VDC, 40 A with certifications for Hazardous Areas as well as Marine (GL) DeltaV Bulk Power Supply Redundancy Module, VDC 20 A with certifications for Hazardous Areas as well as Marine (GL) DeltaV Bulk Power Supply Redundancy Module, VDC 40 A with certifications for Hazardous Areas as well as Marine (GL) DeltaV Bulk Power Supply Redundancy Module, VDC 80 A with certifications for Hazardous Areas as well as Marine (GL) Model Number VE5021 KJ1503X1-BA1 (12P7632X012) VE5022 KJ1503X1-BB1 (12P7633X012) VE5023 VE5024 KJ1503X1-BB2 (12P7634X012) VE5026 VE5027 KJ1503X1-BB3 (12P7635X012) VE5028 VE5029 KJ1503X1-BB4 (12P7636X012) VE5031 KJ1503X1-BC1 (12P7637X012) VE5032 KJ1503X1-BD1 (12P7638X012) VE5033 KJ1503X1-BD2 (12P7639X012) Emerson Process Management Asia Pacific: Europe, Middle East: North America, Latin America: T 1 (800) or 1 (512) , Emerson Process Management. All rights reserved. The Emerson logo is a trademark and service mark of Emerson Electric Company. The DeltaV logo is a mark of one of the Emerson Process Management family of companies. All other marks are the property of their respective owners. The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warrantees or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available on request. We reserve the right to modify or improve the design or specification of such products at any time without notice.
S-series DC to DC Power Supply
January 2013 Page 1 The DeltaV S-series DC/DC system power supplies are modular, easy to install, and secure Easy to use Flexible and cost-effective Secure Simplified system power Introduction Power your
S-series Mass Connection Solutions
DeltaV Distributed Control System Product Data Sheet March 2015 S-series Mass Connection Solutions Fast, easy and error-free cabinet wiring Modular design, improves reliability Lowers overall termination
S-series SQ Controller
DeltaV Distributed Control System Product Data Sheet December 2015 S-series SQ Controller Scalable controllers Quick assembly Easy-to-use Field proven architecture Designed for Electonic Marshalling Advanced
DeltaV SISnet Repeater
September 2013 Page 1 The DeltaV SIS platform is the world s smart SIS system to use the power of predictive intelligence for increasing the availability of the entire safety instrumented function. Fiber-optic
M-series MD Plus Controller
August 2013 Page 1 The DeltaV MD Plus Controller and the DeltaV I/O subsystem make rapid installation easy. Increases productivity Easy to use Has the flexibility to meet your needs Introduction The MD
Power Supplies 3. SDN-P DIN Rail Series
SDN-P DIN Rail Series The SDN DIN Rail power supplies provide industry leading performance. Sag Immunity, transient suppression and noise tolerant, the SDN series ensures compatibility in demanding applications.
S-series DeviceNet Interface Card
January 2013 Page 1 The DeltaV provides the solution for interfacing to discrete actuators and sensors. Offers freedom to choose appropriate bus for application Supports standard device-level busses Reduces
M-series FOUNDATION Fieldbus I/O
April 2013 Page 1 M-series FOUNDATION Fieldbus I/O Use DeltaV state-of-the-art FOUNDATION Fieldbus redundant I/O for your process control system Increases input/output Takes advantage of all smart device
CompactLogix Power Supplies Specifications
Technical Data CompactLogix Power Supplies Specifications 1768 CompactLogix Power Supplies Catalog Numbers 1768-PA3, 1768-PB3 1769 Compact I/O Power Supplies Catalog Numbers 1769-PA2, 1769-PB2, 1769-PA4,
M-series Virtual I/O Module 2
DeltaV Distributed Control System Product Data Sheet M-series Virtual I/O Module 2 Non-intrusive DeltaV I/O simulation Powerful integration solution Easy to use Modular, flexible packaging The M-series
Chrome DIN Rail Power Supply 24V 30W 1 Phase (Class II & NEC Class 2) / DRC-24V30W1AZ
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage without power de-rating Efficiency > 87.0% @ 115Vac & 230Vac NEC Class 2 / Limited
Chrome DIN Rail Power Supply 24V 91.2W 1 Phase (Class II & NEC Class 2) / DRC-24V100W1AZ
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage without power de-rating Efficiency > 87.0% @ 115Vac, > 89.0% @ 230Vac NEC Class
CliQ DIN Rail Power Supply 24V 120W 1 Phase / DRP024V120W1AA
Highlights & Features Reliable design, with expected life of 10 years Compact, rugged design for ease of handling and installation Multiple connections to terminals allowed Designed for Class I Div. 2
STEP-PS/1AC/12DC/1.5. Extract from the online catalog. Order No.: 2868567. DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase
Extract from the online catalog STEP-PS/1AC/12DC/1.5 Order No.: 2868567 DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase Commercial data EAN 4046356292924 Pack 1 pcs. Customs tariff
Rosemount 333 HART Tri-Loop
Product Data Sheet September 2014 00813-0100-4754, Rev GA Rosemount 333 HART Tri-Loop HART-to-Analog Signal Converter Convert a digital HART signal into three additional analog signals Easy to configure
Chrome DIN Rail Power Supply 12V 54W 1 Phase (Class II & NEC Class 2) / DRC-12V60W1AG
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage and full power up to 55 C Power will not de-rate for the entire input voltage range
RM4TG20 three-phase network control relay RM4-T - range 200..500 V
Characteristics three-phase network control relay RM4-T - range 200..500 V Complementary [Us] rated supply voltage Output contacts Setting accuracy of time delay Delay at power up Measuring cycle Marking
Actuator-Sensor-Interface
Selection and ordering data Design Order No. Price Pack 3RX9 307-0AA00 3RX9 307-1AA00 4FD5 213-0AA10-1A 3RX9 305-1AA00 3RX9 306-1AA00 Single output IP 65 current 2.4 A Rated input voltage DC 24 V current
1756 ControlLogix Chassis Specifications
Technical Data 1756 ControlLogix Chassis Specifications Catalog Numbers 1756-A4/B, 1756-A4K/B, 1756-A4/C, 1756-A4K/C, 1756-A7/B, 1756-A7K/B, 1756-A7/C, 1756-A7K/C, 1756-A10/B, 1756-A10K/B, 1756-A10/C,
Rosemount 333 HART Tri-Loop
Product Data Sheet Rosemount 333 Rosemount 333 HART Tri-Loop HART-TO-ANALOG SIGNAL CONVERTER Convert a digital HART signal into three additional analog signals Easy to configure and install Accessory product
Wireless I/O Card. Wireless I/O Card. Introduction. DeltaV Product Data Sheet
October 2014 Page 1 Redundant (WIOC) Fully redundant Wireless solution from to the Smart Wireless Field Link Optional simplex for smaller applications Seamless integration with DeltaV system and AMS Suite.
CliQ DIN Rail Power Supply 24V 120W 1 Phase / DRP024V120W1AA
Highlights & Features Universal AC input voltage Power will not de-rate for the entire input voltage range Power Boost of 150% for 3 seconds Full corrosion resistant aluminium chassis SEMI F47 certified
3500/15 Power Supply Bently Nevada* Asset Condition Monitoring
3500/15 Power Supply Bently Nevada* Asset Condition Monitoring Description The 3500 Power Supplies are half-height modules and must be installed in the specially designed slots on the left side of the
RM17TE 183...528 V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC
Characteristics multifunction control relay RM17-TE - range 183..528 V AC Complementary Reset time Maximum switching voltage Minimum switching current Maximum switching current [Us] rated supply voltage
MICROSENS. Central 48 V DC Power Supplies for PoE-Components. Description. Features
Central 48 V DC Power Supplies for PoE-Components MICROSENS Description Active network equipment which is supporting the Power-over-Ethernet functions, typically requires a powerful 48 V DC power supply.
Safety technique. Emergency stop module BO 5988 safemaster
Safety technique Emergency stop module BO 5988 safemaster 0221562 Function diagram Pushbutton on Mains or emergencystop () K1 According to EC Directive for machines 98/37/EG According to IEC/E 60204-1
Power Supply Unit, Primary Switched, Narrow Design MINI-PS-12-24DC/24DC/1
Power Supply Unit, Primary Switched, Narrow Design MINI POWER provides: Extra narrow design with widths of 22.5 mm, 45 mm, and 67.5 mm (0.886, 1.772, and 2.657 in.) Global use due to a wide-range input
Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592. * see variants. Applications.
Safety Technique SAFEMASTER Emergency Stop Module BG 5924, IP 5924 Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start 0225592 BG 5924 IP 5924 Product Description
O WA-120U series IP67. 120W Single Output Switching Power Supply. Features. Aplications
Features UniversalACinput/Fulrange Built-inactivePFCfunction Higheficiencyupto91% Protections:Shortcircuit/Overcurent/ Overvoltage/Overtemperature Fanlesdesign,colingbyfreairconvection Colingbyfreairconvection
RM35UA13MW. range 15..600 V. Main. Product or component type. Relay monitored parameters
Characteristics multifunction voltage control relay RM35-U - range 15..600 V Complementary Reset time Maximum switching voltage [Us] rated supply voltage Supply voltage limits Power consumption in W Main
AC/DC Power Modules C B. TML Series, 20 & 40 Watt. Features. 20 Watt Models
TML Series, 0 & 0 Watt Features C B Scheme LVD UL 090- Encapsulated power supplies with increased power density Replaces TML and TML 0 series PCB mount or chassis mount with screw terminals Single, dual
Emerson Smart Firewall
DeltaV TM Distributed Control System Product Data Sheet Emerson Smart Firewall The Emerson Smart Firewall protects the DeltaV system with an easy to use perimeter defense solution. Purpose built for easy
SYSTEM DESCRIPTION Termination Boards
PROCESS AUTOMATION SYSTEM DESCRIPTION Termination Boards Non-IS Termination Boards for Yokogawa CENTUM C3 and ProSafe RS ISO9001 With regard to the supply of products, the current issue of the following
R4D0-FB-IA* FieldBarrier. Features. Assembly. Function. Connection IN + - S OUT ... ... Spur 2. Spur 1. Zone 1. Zone 0
FieldBarrier Features Assembly 8... 12 outputs Ex ia IIC, FISCO and Entity Advanced fault isolation and diagnostics at the spur FieldBarrier in Zone 1/Div. 2 Instruments in Zone 0...1/Div. 1 For FOUNDATION
CPCI-3U-AC-300W-R. Rugged 300W AC Input 3U CompactPCI Power Supply. Electrical Specification for: Telkoor Part Number: 900-4602-0000
Electrical Specification for: CPCI-3U-AC-300W-R Rugged 300W AC Input 3U CompactPCI Power Supply Telkoor Part Number: 900-4602-0000 GENERAL SCALE RELEASE DATE 12/9/06 SHEET 1 OF 6 REVISION HISTORY Rev Level
Redundancy Module QUINT-DIODE/40
Redundancy Module QUT DIODE provides: 00% decoupling of power supplies connected in parallel Can be installed in potentially explosive areas Load currents up to 60 A supported Easy assembly by snapping
Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Safety relay for monitoring E-STOP pushbuttons. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous Safe separation of
33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application
33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at Standard -40 to +60 C Temperature Range Diagnostic LEDs Full Protection
Series AMEPR30-AZ up to 2.5A AC-DC / DC-DC LED Driver / Converter
FEATURES: Click on Series name for product info on aimtec.com Models Single output Model Max Output Power (W) 1 AC-DC Constant Current or Constant Over temperature protection Voltage LED Driver Over current
Power Supplies 3. SDN-C Compact DIN Rail Series
Power Supplies 3 SDN-C Compact DIN Rail Series The SDN-C DIN rail power supplies are the next generation of the popular SDN series. These models combine high efficiency and compact size with new visual
Top Microsystems Proprietary Specification P/N: W090015HK-XP 022410RB-082709V.A0 SPECIFICATION
SPECIFICATION High Quality Switching Wallmount Adapter Interchangeable AC Plugs 90-264VAC Input 13.5W 9VDC 1.5A Output P/N: W090015HK-XP ** Specification Approval** This specification (total 11 pages including
Example of use: Fuse for a solenoid valve. If the fuse is defective, no information is sent to the electronic component.
Overview Switch and button modules The dimensions of the switch and button modules are adapted to the electronic components in the integral housing. The modules are equipped with the universal clip-on
Operating Manual UWAPS-TINY Series
Operating Manual UWAPS-TINY Series Powecon Oy WWW.POWECON.FI 1/9 Table of content 1 Warranty...3 2 Safety information...3 3 Abbreviations and terminology...3 4 List of appendices...4 5 Introduction...4
S-series Electronic Marshalling
DeltaV Distributed Control System Product Data Sheet S-series Electronic Marshalling I/O anywhere you need it Single channel granularity Reduces installed cost of system Fully redundant architecture Field
How To Protect Your Deltav Controllers From Cyber Attacks
February 2015 Page 1 DeltaV Controller Firewall The provides additional security protection from for your DeltaV controllers Provides an additional level of economical cyber-protection to your DeltaV controllers
LOGO!Power. Power supply. LOGO!Power. Overview. Safety instructions. Description, device design, dimension drawing. Mounting/disassembly
Overview Safety instructions 1 Power supply Operating Instructions Description, device design, dimension drawing 2 Mounting/disassembly 3 Mounting position, mounting clearances 4 Installation 5 Technical
1756 ControlLogix Power Supplies Specifications
Technical Data 1756 ControlLogix Power Supplies Specifications Standard Power Supplies Catalog Numbers 1756-PA72, 1756-PA75, 1756-PB72, 1756-PB75, 1756-PC75, 1756-PH75 Standard Slim Power Supplies Catalog
NI 9423. NI C Series Overview DATASHEET. 8-Channel Sinking Digital Input Module
DATASHEET NI 9423 8-Channel Sinking Digital Input Module 8-channel, 100 µs digital input 24 V logic, sinking digital input Compatible with NI CompactDAQ counters 250 Vrms, CAT II isolation 10-position
CAT ATC POWER BREAKER & POWER CASE SWITCH AUTOMATIC TRANSFER SWITCH
CAT ATC POWER BREAKER & POWER CASE SWITCH AUTOMATIC TRANSFER SWITCH Cat transfer switches are designed for a variety of standby power applications. They provide flexibility, reliability and value in a
MILLENIUM INSTALLATION MANUAL NTR 735 A. Simple Automation Control Module (MAS)
MILLENIUM Table of contents 1. INTRODUCTION 1 2. HARDWARE DESCRIPTION 2 3. INSTALLATION 5 4. CONNECTION 6 5. USER SAFETY AND PROTECTION OF EQUIPMENT 8 1. Introduction The MILLENIUM series has been designed
Bimetallic Overload Relay Specifications
Technical Data Bimetallic Overload Relay Specifications Bulletin Number 193K, 193T1 Topic Page Product Overview 2 Standards compliance and Certifications 2 General Specifications 193K 3 Approximate Dimensions
HSP GmbH Zum Handwerkerhof 2 90530 Wendelstein Tel. 09129 / 2852-0 Fax: 09129 / 2852-11 Web: www.hsshsp.de EMAIL: HSP@hsshsp.de NTG-3000.
NTG-3000 Transducer Data Sheet Document Version 2.8 Page 1 of 10 Versions / Revisions: Document Creation Author Description version date 2.0 2012-07-25 P. Compensis First official version 2.1 2012-08-24
RoHS APPROVAL SHEET. ituner 12V/6.6A SERIES NO. (E17) EA10953A. ( ) Edac Power Electronics (Suzhou) Co., Ltd. 59 No.59, Chang Sheng Road, Sheng Pu,
APPROVAL SHEET CUSTOMER ituner CUSTOMER P/N DESCRIPTION EDAC MODEL 12V/6.6A SERIES NO. (E17) EA10953A DATE 2010-06-22 REVISION 0 APPROVED DESIGN PREPARE RoHS CONCLUSION APPROVED CONDITON CUSTOMER S APP
LC1D65AM7 TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 65 A - 220 V AC coil
Product data sheet Characteristics LC1D65AM7 TeSys D contactor - 3P(3 NO) - AC-3 -
I STAR COMPUTER CO., LTD
I STAR COMPUTER CO., LTD Mini Redundant Power Supply 300W+300W for IPC-Computer Model No. TC-300R8 Table of content 1. Introduction...1 2. Specification 2.1 Input Voltage...1 2.2 DC Output...1 2.3 PS-ON
Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
Cisco Unified IP Phone Power Injector
Data Sheet Cisco Unified IP Phone Power Injector The Cisco Unified IP Phone Power Injector (Figure 1) increases the deployment flexibility of Cisco Unified IP phones by providing an alternative powering
DeltaV S-series Traditional I/O
DeltaV Distributed Control System Product Data Sheet DeltaV S-series Traditional I/O Modular and flexible construction. Reduced installation time and expense. Easy online expansion. Field mounted capable
DISCONTINUED PRODUCT. Infrastructure Management & Monitoring For Business-Critical Continuity. Liebert icom-do. User Manual
Infrastructure Management & Monitoring For Business-Critical Continuity Liebert icom-do User Manual TABLE OF CONTENTS 1.0 INTRODUCTION............................... 1 2.0 INSTALLATION...............................
Model: DC-A2IO Advanced HVAC Controller
Model: DC-A2IO Advanced HVAC Controller Job Name: Schedule Reference: Date: DC-A2IO Advanced HVAC Controller Package PAC-IF01 M-Net Adapter AL2-14MR-D α2 Simple Application Controller Accessories AL2-2DA
TM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC - 0.5 A - M8 connector
Product datasheet Characteristics TM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC - 0.5 A - M8 connector Main Range of product Product or component type Range compatibility Enclosure material Bus
Bulletin 150 Smart Motor Controllers SMC-3 Smart Motor Controller
Overview/Modes of Operation Bulletin 150 Smart Motor Controller The SMC-3 is a compact, simple to use, solid-state motor controller designed to operate 3-phase motors. It features a built-in overload relay
Ammeter / Voltmeter Series 8402, 8403, 8405, 8404
/, 8403, 8405, 8404 > Fast comparison of measured with set values > s available, 8403 and 8402 www.stahl.de, 8403, 8405, 8404 10073E00 The ammeters and voltmeters from R. STAHL are explosion protected,
3RT1015-1BB41 CONTACTOR, AC-3 3 KW/400 V,
Automation Technology > Industrial Controls > Switching Devices > Contactors and Contactor Assemblies > Power Contactors for Switching Motors > Contactors SIRIUS 3RT10, 3-pole, 3... 250 kw 3RT1015-1BB41
UMEC International Corporation
UP1301A SERIES 130 Watt Open Frame Switchers Small Size 3*5*1.2(inches) Universal Input to 264 VAC Low Power Consumption Overvoltage Protection Continuous Short Circuit Protection Over Temperature Protection
QuickSpecs. HP Fixed Cord PDUs & Extension Bars (Zero-U/1U Modular PDUs) Overview
Overview Fixed Cord PDUs and Extension Bars have a unique architecture designed specifically for 1U fixed rail servers (HP ProLiant DL360, HP ProLiant DL320, HP ProLiant DL140). This new design consists
PHOENIX CONTACT - 2012-12-14. Features
Electronic monitoring relay for phase sequence, phase failure, and asymmetry monitoring Data sheet 101748_en_03 1 Description PHOEIX COTACT - 2012-12-14 Features Increasingly higher demands are being placed
650W Single Output Power Supply 15V 24V. 27V 48V Rated Current. 0 ~ 100A 0 ~ 50A 0 ~ 40A 0 ~ 27A 0 ~ 24A 0 ~ 13.6A Rated Power
Features: Universal AC input / Full range Programmable output Voltage (0% ~ 05%) Programmable output Current (% ~ 05%) + / 0.5A auxiliary output Forced current sharing at parallel operation Power OK signal
Three-phase monitoring relay CM-PFE
Data sheet Three-phase monitoring relay CM-PFE The CM-PFE is a three-phase monitoring relay that monitors the phase parameter phase sequence and phase failure in three-phase mains. 2CDC 251 005 S0012 Characteristics
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points
Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Features SELV Compliant No Detection Passive Injector Gigabit Compatible Full Protection
Relés e Contatores de Estado Sólido SIRIUS
Relés e Contatores de Estado Sólido SIRIUS Coletânea de dados técnicos ( product data sheet ) Agosto/212 SSR - 3RF21 22,5 mm Ponto Zero SSR - 3RF2 45 mm Ponto Zero SSR - 3RF22 45 mm Ponto Zero Trifásico
3DLevelScanner II TECHNICAL DATA SHEET
TECHNICAL DATA SHEET Changing the market from level to volume APM`s 3DLevelScanner incorporates advanced technology for accurately measuring bulk solids and powder stored in silos and open bins of all
Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages The CM-ESS.M is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
Telephone- and leased line modem for industrial applications TD-36
Telephone- and leased line modem for industrial applications TD-36 Modem for industrial PSTN- and leased line applications The TD-36 is an analogue V.34 PSTN modem as well as an industrial 2-wire leased
1000W Single Output Power Supply 15V 24V. Protection type: Total Power limit, Latch-style (Recovery after reset AC power ON or inhibit)
000W Single Output Power Supply AK-000 series Features: Universal AC input / Full range Programmable output Voltage (0% ~ 05%) Programmable output Current (% ~ 05%) + / 0.5A auxiliary output U profile,
Process modules Digital input PMI for 24 V DC inputs for 120 V AC inputs
E031026 000823 Process modules Digital input PMI for inputs for 120 V AC inputs PMI Input E4, E5, GND L- PMI 120 V AC Input E4, E5, Common C E6, E7, GND L- E6, E7, Common C LEDs for the inputs operation
帝 聞 企 業 股 份 有 限 公 司 DEE VAN ENTERPRISE CO., LTD. SP-235864 DSL-20WA 420024 1 Revision: A Date: 2011.10.24 FOR AC-DC LED DRIVER MODEL NO.
CUSTOMER: PART NUMBER: A200 APPROVAL SHEET FOR AC-DC LED DRIVER MODEL NO. DSL-20WA 420024 1 ORDER NO: SP-235864 承 認 書 确 認 后 請 簽 回 一 份 CUSTOMER APPROVED SIGNATURE DEE VAN ENTERPRISE CO., LTD (Head-Quarter)
Quick Connect. quick - simple - efficient. www.g-mw.de
Quick Connect quick - simple - efficient www.g-mw.de Phone: +49 9103 7129-0 Fax: +49 9103 7129-207 Innovative connection technology to plug three single-phase current transformers to multifunctional power
SITOP power supply. Technical data. SITOP Power Supply. Answers for industry.
SITOP power supply Technical data SITOP Power Supply Answers for industry. Selection table SITOP power supplies Input voltage Output current modular smart LOGO!Power Special design, SIMATIC design Others
Electronic timer CT-VBS.17+18 OFF-delayed without auxiliary voltage, for DC contactors Data sheet
Characteristics Single-function OFF-delay timer for DC contactors, without auxiliary voltage Width.5 mm CDC 5 6 F3 Approvals A culus E CCC CT-VBS a Circuit diagram b Marker label Marks a CE b C-Tick Order
ABB i-bus KNX Switch Actuator, x-fold, 16/20 A, MDRC SA/S x.16.6.1, 2CDG 110 1xx R0011
, 2CDG 110 1xx R0011 SA/S 8.16.6.1 2CDC 071 006 S0010 The 16/20 A Switch actuators are modular installation devices in Pro M Design for installation in the distribution board. The devices are especially
Industrial Power Supplies
TSP-Series Innovative and Powerful Features! Rugged metal case for harsh industrial environments Shock and vibration proof Worlwide Safety approval package. ATEX certification tested in accordance to IECEX
48 SERIES Relay interface modules 10 A
48 Relay interface modules 10 A 1 CO relay interface modules, mm wide Ideal interface for PLC and electronic systems Type 48.P3 1 CO 10 A s Type 48.31 1 CO 10 A s AC coils or DC sensitive coils Supply
Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
49 Series - Relay interface modules 8-10 - 16 A. Features
Features 1 & 2 Pole relay interface modules 5 µm Gold plate contacts for low level switching capability 49.31-50x0-1 Pole 10 A (screw terminal) 49.52-50x0-2 Pole 8 A (screw terminal) 49.72-50x0-2 Pole
Isolating Barriers for our sensors A5S1 in Ex-areas Series D461
D46 Isolating Barriers for our sensors A5S1 in Ex-areas Series KEY FEATURES ATEX / IECEx certified, also approval for UL / CSA and EAC (Russia, Kazakhstan and Belarus Customs Union) Protection grade Ex
ABB i-bus KNX Switch Actuator, x-fold, 16 A, MDRC SA/S x.16.2.1, 2CDG1101xxR0011
Technical Data 2CDC505051D0205 ABB i-bus KNX Product description Switch Actuators SA/S x.16.2.1, 16 A are modular installation devices in ProM design for installation in the distribution board. They are
EGSTON Standard E2xFxWx 12W
General description The family of switchmode power supplies offers an unmatched degree of flexibility and performance fulfilling even the most stringent requirements. Highly flexible electrical configuration
H/L = Power supply. FN = Nominal Frequency. RN = Rated value of output burden. UN = Nominal input voltage. IN = Nominal input current.
Application : The transducer RISH CON - CA/CV (Fig.1) converts a sinusoidal AC Current or AC Voltage into a load independent DC Current or a load independent DC Voltage proportional to the measured value.
Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection)
Data sheet Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection) The temperature monitoring relays CM-TCS monitor overtemperature,
Electro-pneumatic control valves
Electropneumatic control valves 7 Miniature solenoid valves for alternating current Conform to the Low Voltage Directive or mounting on subbase or footprint in accordance with CNOMO recoendation E 066120N
MINI MCR-SL-R-UI(-SP)
Resistance/potiposition transducer INTERFACE Data Sheet 0807_en_05 Description PHOENIX CONTACT - 0/008 Features The slim MINI MCR-SL-R-UI... potiposition transducer has a width of only 6. mm and converts
Ammeter / Voltmeter Series 8402, 8403, 8405, 8404
/, 8403, 8405, 8404 > Fast comparison of measured with set values > s available, 8403 and 8402 www.stahl.de, 8403, 8405, 8404 10073E00 The ammeters and voltmeters from R. STAHL are explosion protected,
Antec TruePower User's Manual
User s Manual Antec TruePower User's Manual Antec TruePower ATX12V power supply Models: TRUE330, TRUE380, TRUE430, TRUE480, TRUE550 Antec Low Noise Technology: The Antec TruePower power supply is equipped
48.12. 2 pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2,000 500 0.37 8/0.65/0.
48 Series - Relay interface modules 8 A Features 48.12 2 Pole Safety relay interface modules, 15.8 mm wide 48.12-2 Pole 8 A (screw terminal) DC sensitive coils Relay with forcibly guided contacts according
1 POLE - 16A 80A Inrush type. (b) Contact configuration A : 1 form A (SPST-NO) C : 1 form C (SPDT) (standard type "K" only)
FTR-K1 SERIES POWER RELAY 1 POLE - 16A 80A Inrush type FTR-K1 Series FEATURES Peak 80A inrush current (1 form A type) Low profile (height: 15.7mm) HIGH INSULATION Insulation distance (between coil and
Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact The CT-AHD.12 is an electronic time relay with OFF-delay. It is from the CT-D range. With their MDRC profile and a width of only
Solid State Timers Type F
Solid State Timers Type F Class 9050 CATALOG CONTENTS Description.....................................................Page Product Descriptions............................................. 3 Application
Type: EASY719 DC RC Article No.: 274119. Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC. Description
Type: EASY719 DC RC Article.: 274119 Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC Description 12 digital inputs (4 inputs available as analog inputs) 6 relay outputs LCD display
1701/22 FieldMonitor Management Interface Module
1701/22 FieldMonitor Management Interface Module Bently Nevada Asset Condition Monitoring Description The 1701/22 FieldMonitor Management Interface Module (FMIM) is a highlyintegrated module that provides