EPD multipurpose doors (short version)

Transcription

1 EPD multipurpose doors (short version) Environmental Product Declaration nach ISO und pren multipurpose doors (Company-EPD) Teckentrup GmbH & Co. KG declaration number EPD-MT-5.0 January 2012

2 Environmental product declaration according to ISO and pren Short version multipurpose door programme holder declaration holder ift Rosenheim GmbH Theodor-Gietl-Strasse Rosenheim -Germany- Basic principles Teckentrup GmbH & Co. KG Industriestraße Verl-Sürenheide -Germany- Declaration number EPD-MT-5.0 Description of the declared product Multipurpose door made of steel Application Non-regenerative primary energy (PEn reg) in MJ Regenerative primary energy (PEreg) in MJ Global warming potential (GWP 100) in kg CO2 eqv. Ozone depletion potential (ODP) in kg R11 eqv. Validity This verified Environmental Product Declaration only applies to the above-mentioned products and is valid for 5 years from the date of issue. The declaration holder is fully liable for the information and evidence on which the declaration is based. Manufacturing A1 A5 Utilization B1 B7 Subsequent utilization C1 C4 Recycling potential D 1510,38 133,59-88,28-636,7 Date of issue: 01. Oktober ,24 5,72-2,36-8,864 Next revision: 01. Oktober ,58 7,98 28,51-47,09 3,96 x 10-6,83 x 10 4,87 x 10 0,32 0,022 8,30 x ,1347 Eutrophication potential (EP) in kg PO4 3 eqv. 0,031 3,00 x ,045-0,0137 Photochemical ozone creation potential (POCP) in kg C2H4 eqv. 0,057 3,10 x ,80 x ,020 Abiotic depletion potential (elements) (ADPel.) in kg Sb eqv. pren 15804:2011 The declaration is based on the PCR document Doors and Hinged Doors PCR-TT-1.0: ,43 x 10 Acidification potential (AP) in kg SO2 eqv. ISO 14025:2006 General guidelines for the creation of type III environmental product declarations Multipurpose doors for inside use in puplic and private buildings. Findings of the Life Cycle Assessment per m² door ,70 x ,44 x 10 3,00 x 10 Scope of the Life Cycle Assessment The Life Cycle Assessment was carried out according to ISO and EN ISO The data collected from the factory of Teckentrup GmbH & Co. KG and generic data of the GaBi 4.4 database were used as the basis. The Life Cycle Assessment was calculated through the life cycle cradle to grave taking into account all upstream chains such as raw material exploitation. -4-2,28 x 10 Notes on publishing Abiotic depletion potential (fossil fuels) (ADPfos) in MJ 1346,80 108,98-54,57 Ulrich Sieberath Bernd Strufe Signature of the director of ift Rosenheim GmbH Signature of the verifying party -631,65 Observe the Conditions and notes for the use of ift test documents.

3 Environmental product declaration according to ISO and pren Short version

4

5

6