Grinder Tips. for Tub and Horizontal Machines
|
|
- Buck Patrick
- 7 years ago
- Views:
Transcription
1 Grinder Tips for Tub and Horizontal Machines
2 Recycling and Forestry Premium replacement parts for your tub or horizontal grinder! KenCoat Kennametal carbide overlay application technology! less downtime provides up to 30% greater wear life versus competitive embedded-style tips holds original shape longer to provide better and more consistent performance KenCoat KenCast Best for asphalt, shingle, and other extreme applications! superior wear and fracture resistance combines the hardness of Kennametal s cemented tungsten carbide with the toughness of air-hardening steel Brazed-On Carbide Unmatched in the industry! produces more material at day s end premier-quality macrocrystalline tungsten carbide inserts, brazed onto an all-steel body; stay securely in place ideal for grinding big, clean wood material KenCast Brazed-On Carbide To place an order, contact Kennametal or your authorized Kennametal distributor.
3 Grinder Tips TABLE OF CONTENTS BY MACHINE MANUFACTURER Bandit... 2 CBI / CMI / Rexworks / Norkot... 3 Diamond Z / Hogzilla / W.H.O. / FHE... 4 DuraTech... 5 Morbark Peterson Precision Husky / Toro / Olathe Packer / Rayco / FAE / ZEHR Weld-On Accessories Kennametal Inc. encourages the safe use of its products. To help avoid personal injury or damage to tools, please: wear approved personal protection equipment, including eye and ear protection, steel-toed shoes, hard hat, and vest make sure tools are properly seated and securely retained do not strike tools with metal objects carbide tips could shatter exercise care when removing tools inspect tools daily. do not use dull, cracked, burred, or bent tools operate all machines with safety in mind stand clear of machines in use, and make sure protective guards are in place do not change tools when the drum is moving or still engaged 1
4 Bandit Machines Bandit Beast Flat Cutter abrasion-resistant Beast Splitter abrasion-resistant Beast Shingle Splitter abrasion-resistant Flat Cutter Splitter Shingle Splitter Diamond Z / Hogzilla / Peterson Morbark Duratech CBI / CMI / Rexworks / Norkot Lock Nut Lock Nut Lock Nut Beast Beast Beast Shingle Fan 2 fan non-rotating Lock Nut Bullet Bit exceptionally durable Lock Nut Raker 3/4 x 2 x 2.8 KenCoat overlay 3/4 10 UNC thread Bolt Beast Beast Beast Raker beveled edge 3/4 10 UNC thread Raker with beveled edge 3/4 10 UNC thread Single Raker with squared edge 3/4 10 UNC thread Bolt Bolt Bolt To place an order, contact Kennametal or your authorized Kennametal distributor.
5 CBI / CMI / Rexworks / Norkot Machines 4800 / Striker 8 x 5-7/8 x 2-1/4 (1-1/4 7 thread) 2-side KenCoat overlay Maxi / Biogrind C3R Tool for soft to medium or abrasive cutting conditions CBI 4800 / Striker 8 x 5-7/8 x 2 (1-5/16 holes) 4800 / Striker 9 x 5-7/8 x 2 (1-5/16 holes) Maxi / Biogrind (shown) 2.5 x 2.5 CMI / Rexworks / Norkot Maxi / Biogrind (shown) 2.5 x 2.5 CMI / Rexworks / Norkot Maxi / Biogrind (shown) 2.5 x 2.5 CMI / Rexworks / Norkot 4-edge KenCoat overlay (5/8 ID) (MTO) 2.5 x edge KenCoat overlay (5/8 ID) 4-edge brazed-on carbide inserts (5/8 ID) x edge brazed-on carbide inserts (5/8 ID) (5/8 ID) x 2.5 (3/4 ID) CMI / Rexworks / Norkot Maxi / Biogrind C3T Tool CMI / Rexworks / Norkot Maxi / Biogrind C3RB Block CMI / Rexworks / Norkot for soft to medium or abrasive cutting conditions for heavy-duty applications threaded nut included CBI CBI CBI / CMI / Diamond Z / Hogzilla / Bandit Rexworks / Norkot Duratech Morbark Peterson CMI / Rexworks / Norkot Maxi / Biogrind C3R Retainer lock ring To place an order, contact Kennametal or your authorized Kennametal distributor. 3
6 Diamond Z / Hogzilla / W.H.O. / FHE Machines Bandit All (shown) 4-side KenCoat overlay with corners Diamond Z / Hogzilla All (shown) Diamond Z / Hogzilla All Ripper (shown) abrasion-resistant Diamond Z / Hogzilla CBI / CMI / Rexworks / Norkot side KenCoat overlay without corners side KenCoat overlay with face Ripper Diamond Z / Hogzilla / All Diamond Z / Hogzilla All Hogzilla Peterson Morbark Duratech /8 on centers 2.9 x 4.3 KenCast tip after more than 40 hours of highly abrasive shingle grinding shows only moderate wear! P P P (shown) 8-side KenCoat overlay with face and sides with face Ripper (shown) 2.7 x carbide teeth Ripper for super-aggressive cutting 2.7 x carbide teeth /16 on centers 2 x side KenCoat overlay 1.5 mounted P /16 on centers 2 x mounted 4 To place an order, contact Kennametal or your authorized Kennametal distributor.
7 Duratech Machines 3010 / (shown) 8-side KenCoat overlay with face and sides with face HD (shown) 1-1/2 on centers 2.3 x 4.5 with rails /2 on centers 2.3 x side KenCoat overlay with face and rails Horizontal Grinders (shown) 4-side KenCoat overlay with corners side KenCoat overlay without corners 3010 / Ripper (shown) 2.7 x carbide teeth Ripper for super-aggressive cutting 2.7 x carbide teeth HD Ripper 1-1/2 on centers 1.9 x side brazed with rails Horizontal Grinders (shown) side KenCoat overlay with face 3010 / (MTO) Log on to to learn more about our complete line of products and services. Horizontal Grinders Ripper (shown) abrasion-resistant Ripper CBI / CMI / Diamond Z / Hogzilla / Bandit Rexworks / Norkot Duratech Morbark Peterson To place an order, contact Kennametal or your authorized Kennametal distributor. 5
8 Morbark Machines Bandit 950 / 1000 / 1100 / 1200 / 2600 / /16 on centers 2 x mounted 1100 / 1200 / /16 on centers 2 x mounted /2 on centers 2.7 x 3.4 Diamond Z / Hogzilla / Peterson Morbark Duratech CBI / CMI / Rexworks / Norkot 1200XL / 1250 / 1300 / 3800 / 4600XL x 4.8 with rails 1200XL / 1250 / 1300 / 3800 / 4600XL x side KenCoat overlay 1200XL / 1250 / 1300 / 3800 / 4600XL Knife Edge 2.8 x 4.8 x 2.1 with rails 1200XL / 1250 / 1300 / 3800 / 4600XL /16 on centers 2.5 x 4.8 solid face (threaded 3/4-16 lugs in back) 1200XL / 1250 / 1300 / 4600XL Ripper 1400 / x side KenCoat overlay 1200XL / 1250 / 1300 / 3800 / 4600XL /16 on centers 2.8 x 5 with wraparound hardfacing 1400 / Ripper 2.7 x To place an order, contact Kennametal or your authorized Kennametal distributor.
9 Morbark Machines 1600 / (shown) 3 x side KenCoat overlay x / /16 on centers 2.8 x 4 8-side KenCoat overlay with rails 5600 (early models) (shown) 4-side KenCoat overlay with corners side KenCoat overlay without corners 1600 / Ripper 3 x / x side KenCoat overlay with rails 5600 (early models) (shown) side KenCoat overlay with face 1600 / x 6.5 solid face 1600 / x 6.5 solid face with wraparound hardfacing 5600 / Knife Edge 3.6 x 6.3 x 2.3 with rails 5600 (early models) Ripper (shown) abrasion-resistant Ripper CBI / CMI / Diamond Z / Hogzilla / Bandit Rexworks / Norkot Duratech Morbark Peterson To place an order, contact Kennametal or your authorized Kennametal distributor. 7
10 Peterson Machines Bandit CBI / CMI / Rexworks / Norkot HC2400 / HC (shown) 8-side KenCoat overlay with face and sides with face HC2400 / HC Ripper (shown) 2.7 x carbide teeth Ripper for super-aggressive cutting 2.7 x carbide teeth HC (shown) 3.3 x side KenCoat overlay with face and rails x 3.8 with rails Diamond Z / Hogzilla / HC5400 HC5400 HC2700 / HC4700 Peterson Morbark Duratech Ripper (shown) 3.3 x 3.8 abrasion-resistant Ripper 3.3 x x (shown) side KenCoat overlay with face HC2700 / HC4700 HC2700 / HC4700 HC2700 / HC Knife Edge 2.8 x 4.8 x 2.1 with rails /16 on centers 2.5 x 4.8 solid face (threaded 3/4-16 lugs in back) Ripper HC2700 / HC /16 on centers 2.8 x 5 with wraparound hardfacing 8 To place an order, contact Kennametal or your authorized Kennametal distributor.
11 Peterson Machines HC5700 / HC x 6.5 solid face HC5700 / HC x 6.5 solid face with wraparound hardfacing HC5700 / HC Knife Edge 3.6 x 6.3 x 2.3 with rails HC HC5700 / HC (shown) 3 x side KenCoat overlay x 6.5 HC (shown) 8-side KenCoat overlay with face side KenCoat overlay with corners side KenCoat overlay without corners HC5700 / HC Ripper 3 x 6.5 HC Ripper (shown) abrasion-resistant Ripper CBI / CMI / Diamond Z / Hogzilla / Bandit Rexworks / Norkot Duratech Morbark Peterson To place an order, contact Kennametal or your authorized Kennametal distributor. 9
12 Machines Bandit CBI / CMI / Rexworks / Norkot TG-400 / (shown) 8-side KenCoat overlay with face and sides with face TG-400 / 525 TG-400 / (MTO) Ripper (shown) 2.7 x carbide teeth Ripper for super-aggressive cutting 2.7 x carbide teeth Diamond Z / Hogzilla / Peterson Morbark Duratech TG-5000 / 9000 / HG-365 / 525 / 4000 / 6000 with Duplex Drum (shown) 3.3 x side KenCoat overlay with sides and rails x 3.8 with rails HG-365 / 525 / 4000 / Ripper 3 x 3.7 with rails with Duplex Drum TG-9000 / HG-365 / 525 / 4000 / x 3.8 with Duplex Drum TG-5000 / HG /16 on centers 2 x mounted with Duplex Drum TG / HG /16 on centers 2 x mounted with Duplex Drum Kennametal carbide grinder tips have sliced our tool-replacement costs by almost 70%! Terry Kane, Owner Georgia Mountain Grinding & Recycling Blairsville, Georgia 10 To place an order, contact Kennametal or your authorized Kennametal distributor.
13 Machines TG-400 / x 4.8 with rails TG-400 / /16 on centers 2.5 x 4.8 solid face (threaded 3/4-16 lugs in back) TG-400 / /16 on centers 2.8 x 5 with wraparound hardfacing TG-800 / 1000 / 8000 / Ripper (shown) abrasion-resistant Ripper TG-400 / 525 / (shown) side KenCoat overlay with face TG-800 / 1000 / 8000 / (shown) side KenCoat overlay with face TG-800 / 1000 / 8000 / TG-400 / Ripper TG-800 / 1000 / 8000 / (shown) 4-side KenCoat overlay with corners side KenCoat overlay without corners CBI / CMI / Diamond Z / Hogzilla / Bandit Rexworks / Norkot Duratech Morbark Peterson To place an order, contact Kennametal or your authorized Kennametal distributor. 11
14 Precision Husky / Toro / Olathe Machines Bandit CBI / CMI / Rexworks / Norkot 837 / 867 / 1000 / (shown) 8-side KenCoat overlay with face and sides with face 837 / 867 / 1000 / (MTO) 4000 / 5000 / (shown) 8-side KenCoat overlay with face Diamond Z / Hogzilla / 4000 / 5000 / / 5000 / / 5000 / 5100 Peterson Morbark Duratech Ripper Knife Edge 2.8 x 4.8 x 2.1 with rails /16 on centers 2.5 x 4.8 solid face (threaded 3/4-16 lugs in back) 4000 / 5000 / /16 on centers 2.8 x 5 with wraparound hardfacing Now offering premium quality fasteners for your grinders! EXPERIENCED STAFF! FAST DELIVERY! Order from stock by Noon EST for same-day shipment. Call Customer Service at or To place an order, contact Kennametal or your authorized Kennametal distributor.
15 Packer / Rayco / FAE / ZEHR Machines C3R Tool for soft to medium or abrasive cutting conditions x side KenCoat overlay Ripper 2.7 x 5.1 Packer ZEHR ZEHR C10 Block for light-duty applications slim-profi le design C3R Retainer lock ring Shark Tooth for drum rotors prevents material build-up on drum Weld-on wear protection! Packer Packer Weld-On Accessories Forestry Mowers mower tip assembly ELIMINATES COSTLY HARDFACING! Shark Tooth for drum rotors for severe applications prevents material build-up on drum KenCast is an exclusive patented Kennametal product. We take tungsten carbide particles of varying sizes and metallurgically bond them to air-hardened steel. This combination of steel s durability with carbide s toughness creates a wear part that withstands extremely abrasive and high-impact applications. KenCast helps your equipment last longer in many cases, a lot longer depending on the application and operating conditions. That means you save money with reduced downtime, repair costs, and inventory. We keep our customers competitive and productive! Rayco / FAE Weld-On Accessories CBI / CMI / Diamond Z / Hogzilla / Bandit Rexworks / Norkot Duratech Morbark Peterson To place an order, contact Kennametal or your authorized Kennametal distributor. 13
16 Kennametal Inc. (USA) Mining and Construction Division Phone: Kennametal Australia Pty. Ltd. Phone: (61) Kennametal Inc. (Canada) Phone: Kennametal Xuzhou Ltd. (Beijing) Representative Offi ce Phone: (86) Kennametal Inc. (France) Phone: (33) Kennametal GmbH & Co. KG (Europe) Phone: (49) Kennametal Japan Ltd. (Tokyo) Phone: (81) Kennametal Korea Ltd. Phone: (82) Kennametal (Malaysia) Sdn. Bhd. Phone: (6) Kennametal Sp. z O.O. (Poland) Phone: (48) Kennametal (Singapore) Pte. Ltd. Phone: (65) Kennametal South Africa Pty. Ltd. Phone: (27) Kennametal Hardpoint Taiwan Inc. Phone: (886) Kennametal (Thailand) Co. Ltd. Phone: (662) Grinder Tips Kennametal The proven global leader in the design, manufacture, implementation, and sale of premium-quality tooling systems for underground and surface mining, road rehabilitation, aggregates production, and waste recycling! Engineering and Customer Support Hours: 8am to 7pm EST Customer Service: (USA and Canada) (USA only) Kennametal Inc Technology Way Latrobe, PA USA Kennametal, the stylized K, KenCast, and KenCoat are trademarks of Kennametal Inc., and are used as such herein. Bandit, CBI, CMI, Rexworks, Norkot, Diamond Z, Hogzilla, W.H.O., FHE, Duratech, Morbark, Peterson,, Precision Husky, Toro, Olathe, Packer, Rayco, FAE, and ZEHR are registered trademarks of their respective owners and are used as such herein Kennametal Inc. l All rights reserved. l Printed in the USA. l B
17
18
HONING LATHE DUPLICATOR CUTTERS
Lay the flat face of the cutter or bit on the flat top surface of the hone with the rest of the cutter overhanging the edge. Rub the cutter or bit up and down the hone (Figure 24-44). Be sure to hold the
More informationMODEL T10023 ACCESSORY KIT #1 FOR T10010/T10097 WET GRINDER
MODEL T0023 ACCESSORY KIT # FOR T000/T0097 WET GRINDER INSTRUCTION SHEET Introduction The Model T0023 Accessory Kit # for the Model T000/T0097 Wet Grinder includes fixtures for sharpening small knives,
More informationCutting the World. Cutting tools. for rotary drum cutters
Cutting the World Cutting tools for rotary drum cutters Round attack picks, pick boxes, retaining clips for erkat rotary drum cutters and cutter wheels erkat rotary drum cutters work under extremely hard
More informationOLUTIONS. ROCTEC Composite Carbide ABRASIVE WATERJET NOZZLES
OLUTIONS ROCTEC Composite Carbide ABRASIVE WATERJET NOZZLES ROCTEC Composite Carbide Our exclusive ROCTEC line of abrasive waterjet nozzles is made from a patented carbide material and proprietary manufacturing
More informationTerex Minerals Processing Systems Canica VSI VERTICAL SHAFT IMPACT CRUSHERS
Terex Minerals Processing Systems Canica VSI VERTICAL SHAFT IMPACT CRUSHERS SERVING THE INDUSTRY SINCE 1974 Vertical Shaft Impactor Benefits Very cubicle product Benificiation of material (elimination
More informationVarel International Workover Bits for remedial, re-entry AND frac plug Drilling Applications
Varel International Workover Bits for remedial, re-entry AND frac plug Drilling Applications Varel International offers the industry's broadest selection of high quality drill bits for remedial, re-entry
More information3/4 PIPE CLAMP WITH STAND
3/4 PIPE CLAMP WITH STAND Model 94053 ASSEMBLY AND OPERATING INSTRUCTIONS (3/4 DIAMETER PIPE NOT INCLUDED.) 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com
More informationChapter 6 Machining Center Carbide Insert Fundamentals
This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. All rights reserved. N10G20G99G40 N20G96S800M3 N30G50S4000 N40T0100M8 N50G00X3.35Z1.25T0101 N60G01X3.25F.002 N70G04X0.5
More informationWA Tubular Hardfacing Electrodes ACTING GLOBAL WELDING LOCAL
ATING GLOBAL WELDING LOAL WA Alphabetical Index version Ø6.0 x 50mm Ø8.0 x 50mm Ø x 50mm Pag This catalogues presents a selection of standard covered tubular electrodes for hardfacing and applications.
More informationDO NOT OPERATE LANCELOT OR SQUIRE WITHOUT FIRST ADJUSTING THE SAFETY GUARD. ( See Below)
Assembly Instructions - Lancelot and Squire King Arthur s Tools (KAT) is pleased to present the first tandem mounted saw chain accessories whereby differing combinations of Lancelot and Squire may be paired
More informationMBSAW. Meat Cutting Band Saw With Meat Grinder Assembly & Operating Instructions
06/2011 MBSAW Meat Cutting Band Saw With Meat Grinder Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper
More informationLEADER IN CUTTING TECHNOLOGY
LEADER IN CUTTING TECHNOLOGY FOR OVER 2 YEARS REASONS WHY TRONEX IS THE BEST IN THE WORLD 1 2 SUPERIOR CUTTING PERFORMANCE Cut hundreds of thousands of times before dulling. Cut hundreds of thousands of
More informationLathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
More informationINTELLIGENT. belt CLEANING BELT CLEANING SOLUTIONS
INTELLIGENT belt CLEANING BELT CLEANING SOLUTIONS BELT CLEANING saves MONEY Carryback is the problem confronted by the material handling industry where product is transported by belt conveyors. working
More informationSaw Tooth Design and Tipping Materials
Saw Tooth Design and Tipping Materials Bruce Lehmann, P.Eng, Ph.D. Sr. Engineer, Thin Kerf Technologies Inc. British Columbia, Canada Introduction The purposes of a saw tooth are to: 1. Remove a chip from
More informationKemet DIAMOND PRODUCTS
Kemet DIAMOND PRODUCTS Kemet Diamond Products Since 1938, Kemet has been at the forefront of precision polishing technology, producing quality diamond pastes, slurries and composite lapping/polishing materials
More informationOPERATING INSTRUCTION MANUAL FOR S-240 HYDRAULIC CUTTERS WITH PARTS LIST
HUSKIE TOOLS, INC. OPERATING INSTRUCTION MANUAL FOR S-240 HYDRAULIC CUTTERS WITH PARTS LIST GENERAL INFORMATION GUIDE FOR S-240 CUTTER The following steps are guidelines for safe operation of the Huskie
More informationCat. Sizes to fit Cat Skid Steer Loaders, Wheel Loaders, Telehandlers, Backhoe Loaders, and most other manufacturers models.
Cat tires enhance productivity with design innovations and with the valuable option of purchasing your tires complete as mounted assemblies. Cat dealers and Cat tire retailers stock wheel types, sizes,
More informationIt's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
More information1000-LB. TRAILER JACK OWNER S MANUAL
1000-LB. TRAILER JACK OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
More informationCOATED CARBIDE. TiN. Al 2 O 3
COATED CARBIDE GENERAL INFORMATION CVD = Chemical Vapour Deposition coated grades GC2015, GC2025, GC2135, GC235, GC3005, GC3015, GC3020, GC3025, GC3115, GC4015, GC4025, GC4035, S05F, and CD1810. PVD =
More information758 Heavy-duty Ratchet Guy Wire Cutter
INSTRUCTION MANUAL 758 Heavy-duty Ratchet Guy Wire Cutter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product
More informationIWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
More informationDigital Fingerprint safe
Digital Fingerprint safe Model 96846 Operation Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product
More informationSAFETY SAFETY APPAREL 20,000 PSI
SAFETY APPAREL TurtleSkin Water Armor is designed for UHP safety. Protection up to 2800 bar or 40,000 psi One size fits all money-saving design Modular design allows you to buy only what you need Replacement
More informationBUTTERFLY SHOWER DOOR INSTALLATION INSTRUCTIONS
BUTTERFLY SHOWER DOOR INSTALLATION INSTRUCTIONS IMPORTANT DreamLine reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings,
More informationCutting Tool Materials
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of cutting tool metallurgy and specific tool applications for various
More informationSAFETY & OPERATING INSTRUCTIONS
SAFETY & OPERATING INSTRUCTIONS EDLUND TOMATO LASER, Models ETL -316, -140 & -380 READ AND UNDERSTAND THIS MANUAL AND ALL INSTRUCTIONS BEFORE OPERATING THIS SLICER. 159 Industrial Parkway, Burlington,
More informationU-Max Chamfering endmill SPMT-WL 0.17 (0.08-0.21) -WH 0.35 (0.10-0.42) R215.64. Long edge cutter 215.3 0.17 (0.10-0.20) R215.3 -AAH 0.12 (0.08-0.
General Turning PROFILING Feed recommendations Feed per tooth, fz (mm/tooth) Insert geometry Insert size Starting value (min.- max.) U-Max Chamfering endmill SPMT-WL 0.17 (0.08-0.21) -WH 0.35 (0.10-0.42)
More informationEarthworks. Living Our Values. www.kennametal.com
Earthworks Living Our Values WORLD HEADQUARTERS Kennametal Inc. 1600 Technology Way Latrobe, PA 15650 USA Tel: 800.446.7738 (United States and Canada) EUROPEAN HEADQUARTERS Kennametal Europe GmbH Rheingoldstrasse
More informationAZEK Rail Install Guide
TRIM MOULDING DECK PORCH RAIL PAVERS AZEK Rail Install Guide Installing AZEK Rail with CableRail by Feeney... 1 Installing CableRail by Feeney for AZEK Rail... 7 Installing AZEK Rail Stairs with CableRail
More informationCOMPETITIVE ADVANTAGE THROUGH INNOVATION
OIL & GAS COMPETITIVE ADVANTAGE THROUGH INNOVATION Element Six works in partnership with customers to develop cutting-edge synthetic diamond and carbide solutions that deliver a step change in productivity
More informationOPERATORS MANUAL MG22 MEAT GRINDER MG22/0209 ED 1 0011220
OPERATORS MANUAL MG22 MEAT GRINDER MG22/0209 ED 1 0011220 TO INSURE BOTH SAFE AND TROUBLE-FREE PERFORMANCE, WE STRESS THAT ALL PERSONNEL THAT WILL BE INVOLVED WITH YOUR NEW UNIVEX MEAT GRINDER MUST READ
More informationPremium Conventional. General Tire Information. High quality; low operating cost. Pneumatic ride in extreme conditions.
Tire and Overview Premium Conventional 185-9932 254 mm (10 419 mm (16.5 185-9933 304 mm (12 419 mm (16.5 High quality; low operating cost. Skid Steer Loader Tires 5436 XD 222-3962 254 mm (10 419 mm (16.5
More information413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:
More informationCHARISMA SHOWER/TUB DOOR INSTALLATION INSTRUCTIONS
CHARISMA SHOWER/TUB DOOR INSTALLATION INSTRUCTIONS IMPORTANT DreamLine reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings,
More information2003 WJTA American Waterjet Conference August 17-19, 2003 Houston, Texas Paper WATERJET NOZZLE MATERIAL TYPES
2003 WJTA American Waterjet Conference August 17-19, 2003 Houston, Texas Paper WATERJET NOZZLE MATERIAL TYPES D. Wright, J. Wolgamott, G. Zink StoneAge, Inc. Durango, Colorado, U.S.A. ABSTRACT There are
More informationPV Mounting System For Crystalline Solar Module THE POWER OF ASTRONERGY
PV Mounting System For Crystalline Solar Module THE POWER OF ASTRONERGY Tile on-roof PV Mounting System Installation on tiles roof. Various quick roof hooks with different strength and structure are available.
More informationOperating Instruction Manual For S-40B Hydraulic Cutters With Parts List
HUSKIE TOOLS, INC. Operating Instruction Manual For S-40B Hydraulic Cutters With Parts List GENERAL INFORMATION GUIDE FOR S-40B CUTTER The following steps are guidelines for safe operation of the Huskie
More informationFixturing systems Fixturing systems for measurement technology
Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.
More informationNotes. Material 1. Tools the employee is expected to operate
OSHA Standard29 CFR 1910.211-.247, Subpart O, Machinery and Machine Guarding, and Subpart P, Hand and Portable-Powered Tools and other Hand- Held Equipment. Hand Tool Safety Preparation 1. Read Applicable
More informationCI SfB. (4-) Nn2. Onduline. Mini Profile. Onduline Garden Roof Range. Onduline Building Products Ltd
CI SfB (4-) Nn2 Onduline Mini Profile Onduline Garden Roof Range Onduline Building Products Ltd Onduline Garden Roof Range Onduline Mini Profile The new Onduline Mini Profile sheets have been designed
More informationElo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors
Installation Manual Elo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors SW602206 Rev B Table of Contents Chapter 1: Safety Warning... 3 Chapter 2: Kit Contents... 4 Included in Kit...
More informationLU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
More informationAll The Right Choices
Cat Undercarriage All The Right Choices Optimizing the value of your small and medium track machines with undercarriage options designed to match your applications and underfoot conditions. Carrying On
More informationDifferent Thinking. The force behind greater productivity.
. The force behind greater productivity. At Kennametal, innovation follows vision. Our revolutionary products and services are inspired by asking what if? The solutions that follow are incorporated into
More informationPlumbing. www.armeg.co.uk. The convenient, compact and clever solutions to your wrench and hand tool needs
INNOVATIVE DRILLING & TOOL SOLUTIONS www.armeg.co.uk Plumbing The convenient, compact and clever solutions to your wrench and hand tool needs Complete Heating Installation with PHI Wrench Set Easy Tap
More informationPRODUCT MANUAL - M090
PRODUCT MANUAL - M090 MODEL 203/266 ELECTRIC CAN OPENER 1 SAFETY CAUTION: SEVERED CAN LIDS HAVE CUTTING EDGES. USE OF A PROTECTIVE GLOVE OR TONGS IS ADVISED WHEN HANDLING LIDS. WARNING To avoid risk of
More informationTOOLS FOR SELF RELIANCE REFURBISHING SHEET No 2. Registered Charity No 280437. Saws for Woodworking
Registered Charity No 280437 Saws for Woodworking Issued December 2002 Registered Charity No 280437 page no 1 SAW TYPES Rip saw For cutting along the grain Crosscut saw [A smaller version is known as a
More informationAMF112 (6904-002010 <00>) 13mm (1/2 in.)
AMF112 () Concrete Wood 13mm (1/2 in.) 5.5mm (7/32 in.) 10mm (3/8 in.) Sanus Systems 2221 Hwy 36 West Saint Paul, MN 55113 USA Customer Service Americas: 800-359-5520 651-484-7988 info@sanus.com Europe,
More informationReasons for reissue of this instruction sheet are provided in Section 5, REVISION SUMMARY.
Reasons for reissue of this instruction sheet are provided in Section 5, REVISION SUMMARY. Air Pressure 586.1 min 689.5 kpa max [85 min 100 psi max] Air Displacement 721,000 mm 3 [44 in. 3 ] Figure 1 Weight
More informationRetractable Screen. Replacement Screen Instructions
Retractable Screen Patent Pending Replacement Screen Instructions For RTS, RET, & RTM Products ATTENTION! Retractable screens are not intended to provide security or provide for the retention of objects,
More informationEaton Heat Containment System (HCS) Chimney. Installation Guide
Eaton Heat Containment System (HCS) Chimney Installation Guide Copyright 2011 Eaton Corporation, Worcester, MA, USA. All rights reserved. Information in this document is subject to change without notice.
More informationAMF112 Instruction Manual
AMF112 Instruction Manual Scan here to view product demo and install videos or visit san.us/103 Milestone AV Technologies 6436 City West Parkway Eden Prairie, MN 55344 USA Customer Service Americas: 800-359-5520
More informationService Manual SSCI. The Care and Maintenance of Casters. Wheeling, IL (800) 323 7366. Form No. 702755 11/06
Service Manual The Care and Maintenance of Casters SSCI Wheeling, IL (800) 323 7366 Form No. 702755 11/06 Service Manual Table of Contents General Information... 3 Introduction... 3 About this Manual...
More informationHow to Conduct a Magnet Pull Test
1 How to Conduct a Magnet Pull Test Many manufacturers today invest thousands if not millions of dollars annually into magnetic separation equipment, proactively reducing the risk that any foreign object
More informationCentricut plasma torches and consumables for ESAB
plasma torches and consumables for ESAB Contents Plasma Product is available for the following major OEM brands AMADA ESAB Kaliburn KJELLBERG KOIKE KOMATSU LINCOLN THERMAL DYNAMICS WHITNEY WIEDEMANN HT,
More informationFinal Report. Period Start Date: October 1, 2000 Period End Date: September 30, 2002
Development of Advanced Drill Components for BHA Using Microwave Technology Incorporating Carbide, Diamond Composites and Functionally Graded Materials Final Report Period Start Date: October 1, 2000 Period
More informationINSTALLATION INSTRUCTIONS for Bifold Doors (JII103)
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for premium composite, hollow and solid core molded Bifold Doors. Bifolds are designed for fast
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationChristie Vive Audio BKT-LA2 Bracket
User Manual 020-101281-01 Christie Vive Audio BKT-LA2 Bracket NOTICES COPYRIGHT AND TRADEMARKS 2015 Christie Digital Systems USA Inc. All rights reserved. All brand names and product names are trademarks,
More informationShopping Cart Chair. Estimated Cost: Less then $25 if you find a free cart. Shopping Cart Chair page 1. FOR MORE PROJECTS, VISIT: makezine.
Shopping for an easy chair? Consider transforming a damaged or abandoned shopping cart. Upcycling an old, discarded shopping cart into a sleek and stylish chair is a fun, inexpensive weekend project and
More informationOWNER S MANUAL Table Tennis Table Patent Pending
OWNER S MANUAL Table Tennis Table Patent Pending Be sure to write your model number and serial number here for future reference. You can find these numbers printed on the bottom of the table. MODEL # T8179
More informationMaraMeter. Indicating Snap Gages
- 9-2 MaraMeter. Indicating Snap Gages Overview MaraMeter. The Indicating Snap Gage is ideal for highly accurate and reliable results on cylindrical work pieces with a narrow tolerance. MaraMeter 840 F
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationDECKING INSTALLATION, CARE & MAINTENANCE INSTRUCTIONS. 866.729.2378 MOISTURESHIELD.COM limited lifetime warranty 866.729.2378 WWW.MOISTURESHIELD.
DECKING INSTALLATION, CARE & MAINTENANCE INSTRUCTIONS 866.729.2378 MOISTURESHIELD.COM limited lifetime warranty Welcome To The Even Greater Outdoors. Congratulations on choosing MoistureShield for your
More informationFRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware
More information10 TON HYDRAULIC PRESS
10 TON HYDRAULIC PRESS Model Nos. CSA10F and CSA10B OPERATING & MAINTENANCE INSTRUCTIONS 0200 SPARE PARTS and SERVICING Please contact your nearest dealer, or CLARKE International, on one of the following
More informationProduct catalogue, abrasive cutting
Product catalogue, abrasive cutting Cutting nozzle assemblies Abrasive jet cutting system Abrasive hopper Abrasive material www.hammelmann.com Contents (Navigation via Bookmarks) Cutting nozzle assemblies
More information**NORWEST DURACHROME**
**NORWEST DURACHROME** WHAT IS DURACHROME? Norwest Durachrome is longwearing, high chromium casting which is cast in the shape of the tool to which it is applied. The chromium alloy is made up of 26% to
More informationCAT FLEXPORT TIRES. Designed to perform from the ground up.
CAT FLEXPORT TIRES Designed to perform from the ground up. We never like to mix-and-match parts on equipment, including tires. You always want to buy from the manufacturer of the machine. They know the
More informationStrut Spring Compressor
Strut Spring Compressor Item 43753 Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. When unpacking, make sure that the product is intact and
More informationMaintenance kits. for hydraulic attachments Edition 2008 / 2009
Maintenance kits for hydraulic attachments Edition 2008 / 2009 Content Power Demolition Tools Lower breaker part kit 5 5 6 6 Expansion bolt kit 7 Tensioning bolt kit 7 DustProtector kit 8 Set of plastic
More informationCummins. Remanufacturing. Genuine Performance. Every Time.
Cummins Remanufacturing. Genuine Performance. Every Time. Genuine Cummins ReCon Engines And Parts. Cummins engines have a reputation for being virtually indestructible, delivering exceptional value over
More informationMSA Saddle Machine Parts & Operating Manual
Machine Model Serial# Register product online @ www.mathey.com PO Box 472110 Tulsa, OK 74147 USA Toll Free: 800-725-7311 918-447-1288 office 918-447-0188 fax www.mathey.com MSA
More informationRebuild Instructions for 70001 and 70010 Transmission
Rebuild Instructions for 70001 and 70010 Transmission Brinn, Incorporated 1615 Tech Drive Bay City, MI 48706 Telephone 989.686.8920 Fax 989.686.6520 www.brinninc.com Notice Read all instructions before
More informationIWAKI MAGNETIC DRIVE PUMPS MDM. Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN
IWAKI MAGNETIC DRIVE PUMPS Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made
More informationLapping and Polishing Basics
Lapping and Polishing Basics Applications Laboratory Report 54 Lapping and Polishing 1.0: Introduction Lapping and polishing is a process by which material is precisely removed from a workpiece (or specimen)
More information1001 Business Center Drive Mount Prospect, IL 60056-2181 Toll Free: (800) 950-5202 Phone: (847) 635-0044 Fax: (847) 635-7866
1001 Business Center Drive Mount Prospect, IL 60056-2181 oll Free: (800) 950-5202 Phone: (847) 635-0044 Fax: (847) 635-7866 http://www.sumicarbide.com Sumitomo offers advanced milling, drilling, and hard
More informationLightweight, Heavy Duty
Lightweight, Heavy Duty Trench Covers System Reliability The light weight combined with the tremendous strength of Comcore Trench Covers translates into speed, productivity and increased system reliability.
More informationUSA: 866.LAWSON4U (866.529.7664) Canada: 800.563.1717 lawsonproducts.com. Electrical Industrial and Fleet Solutions
USA: 866.LAWSON4U (866.529.7664) Canada: 800.563.1717 lawsonproducts.com Electrical Industrial and Fleet Solutions Lawson's ELECTRICAL SOLUTIONS Electrical Wire Low voltage (60V) and high voltage (300/600V)
More informationResharpening Companion
Resharpening Companion 10950 Correct Angles, Pictures, and Step-By-Step Instructions The Resharpening Companion is meant to be a guide and quick reference to help you resharpen. It is not meant to replace
More informationWhere to order engine kits The displacer cylinder CONTINUED
By Harry Walton OCUS sunlight on this model engine, and it runs at full speed, fueled by Fthe biggest nuclear reactor in the solar system the sun. Power is ample to drive a midget water pump or spin a
More informationDestiny Shower Enclosure Installation Instructions
Destiny Shower Enclosure Installation Instructions IMPORTANT Please read carefully the following instructions before installing your shower enclosure. If you have any questions on this shower enclosure
More informationMueller B-101 and A-3 Drilling and Tapping Machines
TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology
More informationUNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
More informationWHAT S DIFFERENT ABOUT OUR CABLERAIL?
WHAT S DIFFERENT ABOUT OUR CABLERAIL? Manufactured for use with: Covered under warranty by ONE trusted manufacturer Consumers want project simplicity. Offer them the added luxury by building high-end custom
More informationSTIH) STIHL NG 7. Gebrauchsanleitung. Instruction Manual Notice d emploi Instrucciones de servicio Istruzioni d uso Instruções de serviço Handleiding
STIH) STIHL Gebrauchsanleitung Instruction Manual Notice d emploi Instrucciones de servicio Istruzioni d uso Instruções de serviço Handleiding Contents English Guide to Using this Manual BA_SE_098_002_0_02.fm
More informationWheel Stud Conversion Kit Installation Instructions
Wheel Stud Conversion Kit Installation Instructions Proper service and repair procedures are vital to the safe, reliable operation of all motor vehicles as well as the personal safety of those performing
More informationBatibox TM flush-mounting boxes for dry partitions
flush-mounting boxes for dry partitions 800 51 800 42 800 53 800 54 800 42 + 800 71 800 77 Cat.Nos 1-gang boxes For 1 module 20 800 40 Drilling diameter 32 mm Depth 40 mm For 1 gang or 2 modules For wiring
More informationPNEUMATIC PLANISHING HAMMER
PNEUMATIC PLANISHING HAMMER 94847 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed Exclusively by Harbor
More informationDock Hardware & Accessory Products Catalog
Dock Hardware & Accessory Products Catalog Product Page # Product Page # Angle Brackets/Clips 8 Back Up Plate 5 Backing Plate/Hurricane Stop 10 Carriage Bolt Sets 4 Chain Retainer 10 Connector Pin Set
More informationPads for use on Dual Action / Random Orbital Sanders
70515V 5115 5" PSA 5/16 x 24 12,000 70516V 5116 6" PSA 5/16 x 24 10,000 J70515 5215 5" Hook 5/16 x 24 12,000 J70516 5216 6" Hook 5/16 x 24 10,000 Firm, low profile urethane molded pad with a heavy duty
More informationHS-Alu-Premium. Curing chambers for the concrete industry in an innovative aluminium version
ANLAGENTECHNIK HS-Alu-Premium Curing chambers for the concrete industry in an innovative aluminium version + resistant to corrosion + low weight + simple assembly due to snap-in connections and building
More informationIn-Ground Basketball System Owners Manual
In-Ground Basketball System Owners Manual Customer Service Center N53 W4700 South Corporate Circle Sussex, WI 53089 U.S.A. Write Model Number From Box Here: WARNING! 3 Capable Adults REQUIRED TOOLS AND
More informationZenbot CNC User s guide www.zenbotcnc.com
Zenbot CNC User s guide www.zenbotcnc.com Note: If at any point you are unsure what to do or would like assistance, don t hesitate to email service@zenbotcnc.com, or call 559-901-8329. Customer satisfaction
More informationRadianceRail Installation Guide
RadianceRail Installation Guide Installing RadianceRail with CableRail by Feeney... 2 Installing CableRail by Feeney for RadianceRail... 7 Installing RadianceRail Stairs with CableRail by Feeney... 10
More informationTech Shop Safety Level 2 - FN000425. Tech Shop / Tool Safety Operations. (Fermilab machines not covered in course FN000258)
Tech Shop Safety Level 2 - FN000425 Tech Shop / Tool Safety Operations (Fermilab machines not covered in course FN000258) Table of Contents Tech Shop / Tool Safety Operations 3 General Rules of Safety
More informationM128 SERVICE MANUAL- M128 MODEL #S-11 MANUAL CAN OPENER
SERVICE MANUAL- M128 MODEL #S-11 MANUAL CAN OPENER 1 Model S-11 Can Opener Assembly Procedure The Model S-11 can opener will be assembled according to the following procedure: I. Model S-11 Handle and
More informationKEEP FOR FUTURE REFERENCE MRTALP VERTICAL LIFT BAR READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT
KEEP FOR FUTURE REFERENCE INSTRUCTIONS P.O. Box 368 908 West Main Laurel, MT USA 59044 phone 800-548-7341 phone 406-628-8231 fax 406-628-8354 International Version MODEL NUMBER: LB10VLB MRTALP VERTICAL
More information