T&S Ball Valves. High Technology Valve & Fitting Series.
|
|
|
- Thomasine Chandler
- 7 years ago
- Views:
Transcription
1 T&S Ball Valves High Technology Valve & Fitting Series
2 120 SERIES ONE PIECE TYPE SBV 120H Series Features Simple design with one piece body Tight and smooth, low torque and easy operation One-piece ball stem Panel mountable Variety of End Connections Straight, Angle and 3-Way flow patterns Each and every valve is tested at the factory Specifications Testing Pressure rating 3000psig F (21 C) Temperature rating 50 to 150 F (10 to 65 C) with PTFE seat and packing Body material 316 stainless steel and Brass Port Connections 1/16 to 3/4 and 3mm to 12mm Orifice and (1.3mm to 10.3mm) Each Valve is tested with nitrogen at 1000psig(69bar) to maximum allowable leak rate of 0.1 SCCM. Packing Adjustment Valves are adjusted for factory testing at 1000psig(69bar). Packing must be readjusted for service at higher pressures. Materials of Construction Material Grade / ASTM Specification No. Component Stainless Steel Brass Handle Zinc 1 Set Screw Stainless Steel 2 Panel Nut Stainless Steel Brass 3 Packing Bolt SS316 / A479 Brass / B16 *4 Packing PTFE 5 Upper Packing Gland SS316 / A479 6 Lower Packing Gland *7 Upper&Lower Ball Seal PTFE Side Disc *8 SS316 - Sintered Side Ring *9 Ball Stem SS316 / A479 *10 Body SS316 / A479 Brass / B16 Wetted components are marked "*" 2
3 H SERIES H Series : 2-Way (On - Off Valve) End Connections Orifice Cv Series Part No. Inlet Outlet A A1 B D E F G H I W H1 H2 H3 H4 S /16 SUPERLOK S 3M 0.2 3mm SUPERLOK S /8 SUPERLOK F 2N 0.5 1/8 FEMALE NPT S 6M mm SUPERLOK S /4 SUPERLOK F 2N 1.2 1/8 FEMALE NPT F 4N 0.9 1/4 FEMALE NPT F 4R 0.9 1/4 ISO FEMALE M 4N 1.2 1/4 MALE NPT MS 4N /4 MALE NPT 1/4 SUPERLOK S 6M 2.4 6mm SUPERLOK S /4 SUPERLOK S 8M 1.5 8mm SUPERLOK S /8 SUPERLOK F 4N 3.0 1/4 FEMALE NPT F 6N 2.6 3/8 FEMALE NPT F 6R /8 ISO FEMALE S /8 SUPERLOK S 10M mm SUPERLOK F 8N 6.3 1/2 FEMALE NPT F 8R 6.3 1/2 ISO FEMALE S 12M mm SUPERLOK S /2 SUPERLOK S /4 SUPERLOK Dimensions shown with SUPERLOK nuts measure in the finger-tight, where applicable. All dimensions are for reference only, subject to change 3
4 H SERIES H Series : 3-Way (Switching Valve) End Connections Orifice Cv Series Part No. Inlet Outlet A A1 B D E F G H I W H13 H23 H33 H43 S /16 SUPERLOK S 3M mm SUPERLOK S /8 SUPERLOK F 2N 0.3 1/8 FEMALE NPT S 6M mm SUPERLOK S /4 SUPERLOK F 4N 1/4 FEMALE NPT 0.75 F 4R 1/4 ISO FEMALE MS 4N /4 MALE NPT 1/4 SUPERLOK S 6M 6mm SUPERLOK S 4 1/4 SUPERLOK S 8M 0.8 8mm SUPERLOK F 4N 1.7 1/4 FEMALE NPT F 6N 3/8 FEMALE NPT F 6R 7.1 3/8 ISO FEMALE S 6 3/8 SUPERLOK 2.0 S 10M 10mm SUPERLOK F 8N 1/2 FEMALE NPT 3.5 F 8R 1/2 ISO FEMALE S 12M mm SUPERLOK S 8 1/2 SUPERLOK S /4 SUPERLOK Dimensions shown with SUPERLOK nuts measure in the finger-tight, where applicable. All dimensions are for reference only, subject to change 4
5 H SERIES Pressure Rating Vlave 2-Way Straight Pattern psig (bar) 2-Way Angle Pattern psig (bar) 3-Way Switching psig (bar) H (172) 2500 (172) 2500 (172) H (206) 2500 (172) 2500 (172) H (172) 1500 (103) 1500 (103) H (172) 1500 (103) 1500 (103) Flow Data at 70 F (20 C) Straight Type Pressure Dorp to Atmospher( p)psi Cv Air Flow, SCFM Water Flow, US GPM Angle Type & 3-Way Pressure Dorp to Atmospher( p)psi Cv Air Flow, SCFM Water Flow, US GPM Ordering Information Example : H1 A - S - 6M - SS Valve Series SBVH120H1 SBVH120H2 SBVH120H3 SBVH120H4 2. Pattern Designator Nil:2-Way Straight (Standard) A:2-Way Angle 3:3-Way 3. End Connection Type S : SUPERLOK Tube Fitting F : Female Thread M : Male Thread MS : Male Thread to SUPERLOK Tube Fitting 4. End Connection Size -Tube O.D Designation Tube O.D (inch) 1/16 1/8 1/4 3/8 1/2 Designation Tube O.D (mm) Designation 3M 6M 8M 10M 12M - Pipe Thread Designation Size(inch) 1/8 1/4 3/8 1/2 Screwed NPT 2N 4N 6N 8N Screwed BSPT 2R 4R 6R 8R 5. Meterial Designator SS : 316 Stainless Steel B : BRASS 5
6 210 SERIES TWO PIECE TYPE SBV210 Series Features Compact design Tight and smooth, low torque and easy operation Butterfly and lever handle available Panel mountable Variety of End Connections Each and every valve is tested at the factory Specifications Pressure-Temperature Ratings Pressure rating Body material Port Connections Orifice 1000psig F (38 C) 316 stainless steel and Brass 1/4 to 1 and 6mm to 16mm 5.0mm to 16.0mm Materials of Construction Material Grade / ASTM Specification No. Component Stainless Steel Brass SS304 Lever handle with PVC color coated 1 Handle Zinc butterfly handle with nickel plated 2 Stem SS316 / A479 3 Lock Nut Stainless Steel 4 Upper Stem Washer SS304 / A479 5 Lower Stem Washer 6 Upper Stem Seal PTFE 7 Lower Stem Seal 8 Ball SS316 / A479 9 Seat PTFE 10 Connector Seal Body SS316 / A479 Brass / B16 End Connector SS316 / A479 Brass / B16 Insert(for Female Thread) SS316 / A479 6
7 SBV210 SERIES SBV210 Series Orifice Cv End Connections Series Part No. (mm) A H I L S 6M mm SUPERLOK 79.8 S /4 SUPERLOK F 4N 1.4 1/4 FEMALE NPT 42.8 S 10M mm SUPERLOK 91.5 S /8 SUPERLOK F 6N 2.6 3/8 FEMALE NPT 46.6 S 12M mm SUPERLOK SBV210 S /2 SUPERLOK F 8N 9.5 1/2 FEMALE NPT 55.0 S 16M mm SUPERLOK S /8 SUPERLOK S /4 SUPERLOK F 12N /4 FEMALE NPT 61.3 S SUPERLOK F 16N FEMALE NPT All dimensions are for reference only, subject to change SBVA210 Series Orifice End Connections Series Part No. (mm) A B H S /4 SUPERLOK S /8 SUPERLOK SBVA210 S /2 SUPERLOK S /4 SUPERLOK S SUPERLOK All dimensions are for reference only, subject to change 7
8 SBVT210 SERIES SBVT210 Series C B SUPERLOK A SUPERLOK BMT SUPERLOK OPEN CLOSE SUPERLOK Orifice End Connections Series Part No. (mm) A B C S /4 SUPERLOK S /8 SUPERLOK SBVT210 S /2 SUPERLOK S /4 SUPERLOK S SUPERLOK All dimensions are for reference only, subject to change Ordering Information Example : - S BH - SS Valve Series SBV210 SBVA210 SBVT End Connection S : SUPERLOK Tube Fitting F : Female Thread 3. End Connection Size -Tube O.D Designation Tube O.D (inch) 1/4 3/8 1/2 3/4 1 Designation Tube O.D (mm) Designation 6M 10M 12M 16M - Pipe Thread Designation Size(inch) 1/4 3/8 1/2 3/4 1 Screwed NPT 4N 6N 8N 12N 16N Screwed BSPT 4R 6R 8R 12R 12R 4. Handle Designator Nil : Butterfly Handle (Standard) BH : Bar Handle 5. Meterial Designator SS : 316 Stainless Steel B : BRASS 8
9 360 SERIES THREE PIECE HIGH-PRESSURE TYPE SBVH360 Series Features Compact design High flow rate with maximum orifice Variety of End Connections Anti blow-out stem design Each and every valve is tested at the factory Specifications Pressure rating Temperature rating Body material Port Connections Orifice 6000psig F (21 C) -22 to 265 F (-30 to 130 C) with PVDF seat -65 to 500 F (-54 to 260 C) with PEEK seat 316 stainless steel and Brass 1/4 to 1 and 6mm to 25mm 10.0mm to 19.0mm Testing Each Valve is tested with nitrogen at 1000psig(69bar) to maximum allowable leak rate of 0.1 SCCM. Hydrostatic shell test is porformed at 1.5 times of the working pressure. (OPTION) Materials of Construction No. Component Material Grade / ASTM Specification Stainless Steel 1 Handle SS304 Lever handle with PVC color coated 2 Lock Nut 3 Spring Washer Stainless Steel 4 Pin *5 Stem SS316 / A479 6 Stem Washer SS304 / A479 *7 Stem Packing PTFE *8 Ball SS316 / A479 *9 Seat PVDF (Standard) *10 End Connector SS316 / A479 *11 Connector Seal PTFE *12 Body SS316 / A479 Wetted components are marked "*" 9
10 SBVH360 SERIES SBVH360 SERIES (2-Way) Orifice Cv End Connections Series Part No. A B I H d (min) S /4 SUPERLOK S /8 SUPERLOK S 8 1/2 SUPERLOK F 4N 1/4 FEMALE NPT SBVH3601 F 6N /8 FEMALE NPT F 8N 1/2 FEMALE NPT M 4N 3.7 1/4 MALE NPT M 6N 7.2 3/8 MALE NPT M 8N 7.5 1/2 MALE NPT F 8N 1/2 FEMALE NPT F 12N 3/4 FEMALE NPT SBVH3602 M 12N /4 MALE NPT S 10 5/8 SUPERLOK S 12 3/4 SUPERLOK F 12N 3/4 FEMALE NPT F 16N 1 FEMALE NPT SBVH3603 S /4 SUPERLOK S SUPERLOK M 12N /4 MALE NPT M 16N MALE NPT All dimensions are for reference only, subject to change SBVH360-3S SERIES (3-Way) SIDE INLET PORT SBVH360-3B SERIES (3-Way) BOMTTOM INLET PORT Orifice End Connections Series Part No. A B I H C S 4 1/4 SUPERLOK S 6 3/8 SUPERLOK SBVH3601-3B S 8 1/2 SUPERLOK & SBVH3601-3S F 4N 1/4 FEMALE NPT F 6N 3/8 FEMALE NPT F 8N 1/2 FEMALE NPT SBVH3602-3B & SBVH3602-3S SBVH3603-3B & SBVH3603-3S S 10 5/8 SUPERLOK S 12 3/4 SUPERLOK F 8N 1/2 FEMALE NPT F 12N 3/4 FEMALE NPT S 12 3/4 SUPERLOK S 16 1 SUPERLOK F 12N 3/4 FEMALE NPT F 16N 1 FEMALE NPT
11 SBVH360 SERIES Pressure & Temperature Rating 2-Way Straight Valve Series & Way Angle & 3-Way Materials Pressure C to 21 C Seat Stem Packing End Connector Seal (-65 F to 70 F) Temperature Rating PVDF -30 C to 130 C(-22 F to 265 F) 6000psig (413bar) PCTFE -30 C to 150 C(-22 F to 355 F) PEEK 10000psig (689bar) -54 C to 230 C(-65 F to 446 F) PTFE PVDF 5000psig (344bar) PCTFE -23 C to 191 C(-10 F to 375 F) PEEK 6000psig (413bar) Valve Series & 3603 Materials Pressure C to 21 C Temperature Rating Seat Stem Packing End Connector Seal (-65 F to 70 F) PVDF -30 C to 130 C(-22 F to 265 F) 4000psig(275bar) PCTFE -30 C to 150 C(-22 F to 355 F) PEEK 6000psig(413bar) -54 C to 230 C(-65 F to 446 F) PTFE VITON PVDF 3000psig(206bar) PCTFE -23 C to 191 C(-10 F to 375 F) 4000psig(275bar) PEEK Ordering Information Example : SBVH S PE - SS Valve Series 2-Way straight 2-Way Angle 3-Way : Bottom Inlet Port 3-Way : Side Inlet Port - SBVH SBVH3601-A - SBVH3601-3B - SBVH3601-3S - SBVH SBVH3602-A - SBVH3602-3B - SBVH3602-3S - SBVH SBVH3603-A - SBVH3603-3B - SBVH3603-3S 2. End Connection S : SUPERLOK Tube Fitting F : Female Thread M : Male Thread 3. Connection Size -Tube O.D Designation Tube O.D (inch) 1/4 3/8 1/2 5/8 3/4 1 Designation Pipe Thread Designation Size(inch) 1/4 3/8 1/2 3/4 1 Screwed BSPT 4N 6N 8N 12N 16N Screwed NPT 4R 6R 8R 12R 12R 4. Seat Material Designator Nil: PVDF(Standard) PC: PCTFE PE: PEEK 5. Meterial Designator SS : 316 Stainless Steel M : ALLOY (Monel) 11
12 Valve Series Key Operation Ball Valves Key Operation Needle Valves Ball Valves Integral Bonnet Needle Valves Union Bonnet Needle Valves Check Valves High Pressure Check Valves High Pressure Needle Valves Plug Valves Manifold Valves Vacuum Clamps Water Regulators Flexible Hoses Double Block & Bleed Valves Swing-Out Ball Valves Toggle Valves Bleed & Purge Valves Quick Connectors High Pressure Ball Valves Hydraulic Ball Valves Trunnion Ball Valves Rising Plug Valves Relief Valves Cryogenic Needle Valves Cryogenic Ball Valves Micron in-line Filters Gauge Root Valves Hydraulic Flange and Components Fitting Series Tube Fittings (Compression Type) Instrument Thread Fittings Forged Fittings Bite Type Tube Fittings (DIN2353) Bite Type Tube Fittings (JIS B2351) 37 Flared Tube Fittings (SAE J514) O-Ring Face Seal Fittings Hose Connectors & Push-On Hose Fittings Electric MCPD(Molded Case Power Distributor) 21-1, Bukjeong-dong Yangsan-si Gyeongsangnam-do Korea Tel Fax 경상남도양산시북정동 21-1 전화 : 팩스 : superlok@superlok.com BMT CBV-3 ( )
Ball Valves (HB Series) Catalog 4121-HB Revised, April 2005
Ball Valves (HB Series) Revised, April 2005 Introduction Parker High Pressure HB4 Series Ball Valves provide reliable shut-off or switching functions. The upper and lower trunnion bearings enhance the
ball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves
2-way Integral Panel Mount Ball Valves Used for quick on-off service with a visual indication of flow, HOKE s 2-way ball valves offer orifice sizes up to 0.25 (6.4mm). Flomite valves feature a floating
Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
Stainless Steel Valves For the Sanitary Industries
www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves
needle valves Needle Valves Index At a Glance 1
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
Hose and Tube Fittings Series 1-3
Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose
Multipurpose Ball Valves
www.swagelok.com Multipurpose Ball Valves 33 Series Working pressures up to 6000 psig (413 bar) High flow capacity in a compact design Available with PEEK and UHMWPE seats Variety of end connections Low
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
TY-FLO Needle Valves
Design/Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.17 to.438 in. Flow Coefficients (C V ) from.37 to.7 Straight or angle flow patterns Optional panel mount Handle options available Non-wetted
Stainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
PRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
Pipe Valves, Fittings and Nipples Pressures to 15,200 psi
Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by
Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.
Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire
Non-Code Liquid Relief, ASME Section VIII, Air/Gas and Steam, National Board Certified, Safety and Relief Valves
Non-Code Liquid Relief, ASME Section VIII, Air/Gas and Steam, National Board Certified, Safety and Relief Valves Features Top guided design offers high capacity with 0.110 in 2 [0.710 cm 2 ] orifice area.
HM Series - DBB. Single, Double Block & Bleed Valves. Continuously Improving Flow Control
HM Series - DBB Single, Double Block & Bleed Valves INDEX / USER RESPONSIBILITY Index Technical Specifications... 3 How To Order / Optional Extras... 5, 9, 12, 14 Hand Valves... 4 Gauge Valves... 6 Model
Block and Bleed Gauge Valves M25 and M251
Product Overview The M25 and M251 are two-valve single outlet gauge valves that combine isolating, calibrating, and venting facilities in a single compact unit. These valves enable gauges, pressure transmitters,
BALL VALVES TECHNICAL CATALOGUE
SITINDUSTRIE VALVO VALVES BALL VALVES Ed. 01/NOV-2004 SITINDUSTRIE reserves the right to change, without notice, 1/16 SITINDUSTRIE VALVE DIVISION We are pleased to introduce you to the ball valves manufactured
Severe-Ser vice Union-Bonnet Needle Valves
www.swagelok.com Severe-Ser vice Union-onnet Needle Valves N Series and N Series Working pressures up to 10 000 psig (689 bar) Temperatures from 65 to 450 F ( 53 to 232 C) with PTFE packing; up to 1200
NORMAN FILTER COMPANY PRODUCT OVERVIEW
NORMAN FILTER COMPANY PRODUCT OVERVIEW LEADING THE WAY IN QUALITY FILTRATION WWW.NORMANFILTERS.COM FILTER ELEMENT INTERCHANGE Tee-Type Filter 4500, 14500, 34500, and 54500 Series Mini Tee-Type Filter 4100
API Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
AIR LINE VALVES AND GAUGES
AIR LINE VALVES AND GAUGES INGERSOLL-RAND AIR LINE VALVES AND GAUGES Maintaining consistent air pressure throughout the entire system is crucial for maximum performance and productivity. Ingersoll-Rand
Hose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
A global supplier of quality instrumentation/piping specification valves through product design and reliability for total customer satisfaction
Made in Britain Valves and Manifolds Double Block and Bleed Valves Monoflange Valve Chart Recorders Calibration Equipment Positioners Accessories A global supplier of quality instrumentation/piping specification
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
VALVES FOR REFRIGERATING SYSTEMS
VALVES FOR REFRIGERATING SYSTEMS FROM QUALITY OUR NATURAL DEVELOPMENT Achieved the goal of fi fty years working in the industry of Refrigeration and Air Conditioning, Castel Quality Range of Products is
Baumann 24003 3 Way Bronze or Stainless Steel Control Valve
Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control
BERMAD Waterworks. Pressure Relief/Sustaining Valve. 700 Series. Model 730. Features and Benefits. Major Additional Features
Pressure Relief/Sustaining Valve Prioritizing pressure zones Ensuring controlled pipeline fill-up Preventing pipeline emptying Pump overload & cavitation protection Safeguarding pump minimum flow Excessive
2 H OW TO ORDER 2 D ESIGN FEATURES 3 P RODUCTS INDEX 35 O VAL FLANGES 35 B LEED 35 C ONDENSING POTS 36 S YPHONS 36 A IR FEED HEADERS
MEK PIPING srl www.mekpiping.com Sede legale/headquarter : Via San Giovanni osco zona P.I.P. Poggiorsini, () 70020 Tel / Fax + 39 080 37063 - Mob. +39 346 3438582 - E-MIL: mekpiping@mekpiping.com P.IV
Check Valves & Actuated Valves
heck Valves & ctuated Valves & U Series Piston non-return valves rated 6,000 psi & 10,000 psi X Series Piston non-return valves rated 20,000 psi Pneumatic ctuators Pneumatically actuated valves Electric
8D.1 BALL ANGLE METER VALVES - 3/4" & 1" P-24258 B-24258 E-24259 B-24259 B-24266 B-24267
BALL ANGLE METER VALVES - 3/4" & " 8D. B-24258 MUELLER 300 Ball Angle Meter Valve MUELLER 0 Conductive Compression Connection for CTS O.D.* tubing x meter swivel nut** adding -3 suffix to catalog number.
American- Darling 5¼" B-84-B-5.
-5 Sealed Lubrication Chamber Seals operating threads from water and debris which greatly reduces routine maintenance. Top Travel Stop Nut Helps prevent stem buckling and damage to bronze components which
CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP. Feed Water Connector 1. 1/2" FIP x 1/2" MIP x 1/4" OD 2. 3.
Picture Item No. Description RO- 0010 Brass Water Feed 1. 3/4" FIP with 1/4" hole 2. Using on R.O. tank RO- O020 Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP RO- 0030 Brass
Needle Valves. NB, NBH, ND, NDH, NF, NFH, NG, NGH, NR, NRG, NT, NU, NUH, NY and NYH Series. www.fitokgroup.com
Needle Valves NB, NBH, N, NH, NF, NFH, NG, NGH, NR, NRG, NT, NU, NUH, NY and NYH Series www.fitokgroup.com ontents Bar Stock Needle Valves NB Series and NBH Series Nonrotating-stem Needle Valves N Series
These features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223
3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223 HERION S HIGH PERFORMANCE POPPET VALVES For those applications requiring high Cv, fast response times, large
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:
MADE IN THE USA BALL VA LV ES
MADE IN THE USA BALL VA LV ES Ball Va l v e s INDEX [PRODUCTS] PRODUCT FAMILY PAGE Standard Bronze Ball Valves...3-4 Bronze Specialty Valves...4-5 Carbon Steel Threaded, Socket Weld & Butt Weld Valves...5-7
ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
Product Manual. CVS Type 67AFR Filter Regulator. Introduction. Installation. Description
Product Manual CVS Type 67AFR Filter Regulator Introduction This CVS Controls product manual includes instructions for the installation, adjustment, maintenance and parts ordering of the CVS Type 67AFR
Integral-Bonnet Needle Valves
www.swagelok.com Integral-Bonnet Needle Valves O, 1, 18, 20, and 26 Series Live-loaded packing system Compact design Working pressures up to 6000 psig (413 bar) Temperatures up to 600 F (315 C) 2 Integral-Bonnet
STORAGE, INSTALLATION AND MAINTENANCE PROCEDURES
GATE VALVE O.S. & Y 1.0 Periodic Inspections 1.1 The valve stem packing should be inspected at least monthly. If the stem packing shows signs of leakage, simply tighten the adjusting nuts to compress the
Compact. Performance. Safety Relief Valves Serie 437 Serie 459. The-Safety-Valve.com
Compact Performance Safety Relief Valves Serie 437 Serie 459 EXTENDED CATALOG The-Safety-Valve.com Valve Finder How to find the right Product Group High operating to set pressure ratio, high backpressure
ANDERSON GREENWOOD. Hand Valves and Accessories INSTRUMENTATION PRODUCTS. Soft Seated Valves Hard Seated Valves Mini Valves
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Hand Valves and Accessories Soft Seated Valves Hard Seated Valves Mini Valves Anderson Greenwood is the industry leader in instrument valve technology and the
Solenoid valves 2/2-way direct-operated Type EV210A
Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral
Severe-Service Union-Bonnet Needle Valves
www.swagelok.com Severe-Service Union-Bonnet Needle Valves N Series and HN Series Working pressures up to 10 000 psig (689 bar) Temperatures from 65 to 450 F ( 53 to 232 C) with PTFE packing; up to 1200
Replacement parts. WM97+ gas-fired water boiler Boiler Manual. OBTAIN PARTS ONLY THROUGH WEIL-McLAIN THE BOILER CONTAINS CERAMIC FIBER MATERIALS
Replacement parts DO NOT SERVICE THE BOILER WITHOUT A WM97+ MAINTENANCE KIT AVAILABLE Failure to adhere to these guidelines can result in severe personal injury, death or substantial property damage. The
P900 SERIES PORTABLE HYDROSTATIC TESTER
P900 SERIES PORTABLE HYDROSTATIC TESTER MODELMODEL P900-SM ( STANDARD MODEL) SHOWN IN PHOTO coated square tubular frame on wheels for easy transport. PANEL MOUNTED CONTROLS: 4 dial gauges, pump regulator
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS The BWX series butterfly valve has been especially designed for use in cryogenic applications with high quality CrNi steel. Testing of the valve includes
1805 Series Relief Valves
October 2011 1805 Series Relief Valves P1026 1805G Type 1805-2 Type 1805-4 Figure 1. Typical 1805 Relief Valves Introduction The 1805 Series relief valves are designed for use in farm tap applications
Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation
Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...
Compact, High-Flow Gas Regulators
www.swagelok.com Compact, High-Flow Gas Regulators HF Series Precise pressure control Tamper-free design High-purity design Preset and adjustable dome-loaded models 2 Compact, High-Flow Gas Regulators
Proportional Relief Valves
www.swagelok.com Proportional Relief Valves R Series Liquid or gas service Set pressures from 10 to psig (0.7 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections 2 Proportional Relief Valves Spring
valve solutions Chemical Cosmetic Cryogenic Food & Beverage Marine Mining Nuclear Oil & Gas Paint Pharmaceutical Pulp & Paper www.quilinox.
valve solutions www.quilinox.com Chemical Cosmetic Cryogenic Food & Beverage Marine Mining Nuclear Oil & Gas Paint Pharmaceutical Pulp & Paper valvulas esfera PBM.pdf (1753) 2015/01 1/10 D E SIGN F E A
Regulator Options and Accessories
Regulator Options and Accessories Regulator accessories are available separately or mounted on Swagelok regulators. Some accessories limit regulator pressure or temperature ratings. Additional materials,
Installation, Operation and Maintenance Manual for Pilot Operated Valves
Installation, Operation and Maintenance Manual for Pilot Operated Valves Models 1400, 1420, 1430, 1460 IOM1400.0 January 2, 2014 REV A 12393 REF. ID 98136 IOM1400.0 REV. A 12541 TABLE OF CONTENTS DESCRIPTION
Baumann 24000 Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
BERMAD Waterworks. Pressure Reducing Valve. 700 Series. Model 720. Features and Benefits. Major Additional Features
Pressure Reducing Valve Flow and leakage reduction Cavitation damage protection Throttling noise reduction Burst protection System maintenance savings The Pressure Reducing Valve is a hydraulically operated,
167D Series Switching Valves
June 2011 167D Series Switching Valves P1185 P1184 167D TWO-WAY SWITCHING VALVE 167DA THREE-WAY SWITCHING VALVE Figure 1. 167D Series Switching Valves Introduction The 167D Series switching valves are
800-348-8467 www.fittingsunlimited.com
Thread and Port Identification Guide 800-348-8467 www.fittingsunlimited.com INDEX Index... 1 Explanation of Symbols... 2 How to Measure Threads... 3-4 Metric vs English Threads... 5 North American Connections
APCO SLOW CLOSING AIR/VACUUM VALVES
BULLETIN 1 JULY 01 APCO SLOW CLOSING AIR/VACUUM VALVES Series 1900 APCO Slow Closing Air/Vacuum s Maximum Air Flow Velocity in Good Pipeline Design The Air/Vacuum operates in the normal fashion allowing
BERMAD Waterworks. Quick Active Check Valve. 700 Series. Model 740Q. Features and Benefits. Major Additional Features
Booster Pump Control Valve Quick Active Check Valve Isolates system from the effects of pump starts and stops for: Solitary single speed pumps Battery of single speed pumps (add & switch) Battery of variable
PLUMBING RE-SUBMITTAL 22 11 17
PLUMBING RE-SUBMITTAL 22 11 17 ACADEMIC BUILDING & PATRIOT S CASA TEXAS A&M UNIVERSITY - SAN ANTONIO, TX NO. 25-3122, VAC NO. 39019 OWNER: ARCHITECT: MEP ENGINEER: GENERAL CONTRACTOR: PLUMBING CONTRACTOR:
4 Posiflow Proportional Solenoid Valves
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
B-1145. Faucet Assembly. T&S Brass and Bronze Works, Inc. Travelers Rest, South Carolina 1-800-476-4103
B-1145 Faucet Assembly 1 Screw, Lever Handle 000922-45 2 Index, Button, Blue/Cold 001660-45 Index, Button, Red/Hot 001661-45 3 Handle, Lever 001638-45 4 Asm, Spindle NSF - RH/Cold 009753-25 Asm, Spindle
TYPE E Main Valve Sizes 3 /8 through 12
SD 3001F PRINTED IN U.S.A. SD 3001F/0707 A B TYPE E MAIN VALVE C D E TYPE E Main Valve Sizes 3 /8 through 12 The Spence Type E Main Valve is of normally closed, single seat design featuring packless construction,
Veriflo Pressure Regulators
Hydraulik - Pneumatik Steffen Haupt Moritzer Straße 35 01589 Riesa Telefon: 03525 6801-0 Telefax: 03525 680120 info@haupt-hydraulik.de Veriflo Pressure Regulators 4511 November 2003 KATALOG Vertrieb: Frau
Full Technical Catalog For Closed-loop Sampling System
Full Technical Catalog For Closed-loop Sampling System Full Technical Catalog For Closed-loop Sampling System FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr. 115, 63069 Offenbach am Main, Germany
SciTech, sro Praha Ceník Jour Research tisk 3.1.2000
Ceny bez DPH, balného a poštovného. Jour Research pricelist 08/99 Part Number Description cena CZK 0001-0737 Wash-Pro Upgrade Kit 7098,00 0001-5530 Gas Flow Meter 22932,00 0001-5531 Silicon Connection
Stockists of valves, actuators, tubes and fittings for instrument and mechanical applications. Company Overview
Stockists of valves, actuators, tubes and fittings for instrument and mechanical applications Company Overview Delivering promises. Since our foundation in 1980, PCE has grown to become an international
2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP
ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP ARI-DP30 Pneumatic actuator Page 2 ARI-DP32 ARI-DP33 Pneumatic actuator DP-Actuator Extended stem
DESIGN STANDARDS SECTION 23 60 00
PART 1 - GENERAL 1.01 Work included: A. Piping, tubing and fittings. B. Piping specialties. C. Special duty valves. D. Refrigerants. E. Chillers. F. Refrigerant monitors. 1.02 General requirements: A.
QLM and QLD Series Three-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
kymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
Technical information
Technical rmation ZA.VE.RO. INDUSTRIAL VALVES 0 CONSTRUCTION STANDARDS API - American Petroleum Institute Spec. 6A Spec. 6D Spec. RP6F Spec. 6FA Std. 598 Std. 605 Std. 607 Specification for wellhead and
FLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
Shut-off & Lockout Valves 1/4" to 1-1/2" port size
Section 16 Shut-off & Lockout Valves 1/4" to 1-1/2" port size Contents T72 Excelon Shut-off & Lockout Valves 1/4", 3/8" Port Sizes....................................ALE-16-2 T73 Excelon Shut-Off & Lockout
High Pressure Equipment High Pressure Valves, Fittings and Tubing
igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle
DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15062 STEAM AND CONDENSATE PIPING PART 1 DESIGN DIRECTIVES 1.1 QUALITY ASSURANCE A. Comply with the provisions of the following: 1.2 DESIGN CRITERIA 1. ASME B 31.9 Building Services Piping : for
Valve Live Loading With Belleville Springs. Belleville Springs for Valve Live Loading
Valve Live Loading With Belleville Springs What is Valve Live Loading? The addition of Belleville Springs to the gland follower studs to maintain the packing load of the valve over time. What s In The
Accessories Fittings, Flow Controls, Mufflers, Pressure Switches & Replacement Parts
Accessories Fittings, Flow Controls, Mufflers, Pressure Switches & Replacement Parts www.numatics.com Table of Contents Accessories World Fittings 3-7 NPTF/Inch Tube Fittings 8-14 Metric Fittings 15-20
Model 4418F. www.amot.com. Overview. Typical applications. Key features and benefits. Accreditations. Starting air/gas valve Vented fuel gas valve
High Pressure Control Valve Model 4418F Overview The 4418F has been designed specifically for use as an air start valve for diesel engines or as a fuel shut-off valve for gas turbine applications. Its
Many Products...One Source
PRESSURE GAUGES Dedicated Sales Rep for Your Area 97%Fill Rate Shipping within 24 Hours State of the Art Warehouse System Technical Support Quality Control Program 25 Whaley Avenue Milverton, Ontario N0K
M A N U A L 13-10-05
Documentation The following information sheets illustrate the description below: 12-WW01-4G-E Sectional view of the lance with main dimensions 12-W101-6G-E Sectional view of the head of the lance with
solenoid valves SV Series 2- and 3-way Solenoid Valves for Gas and Liquid
2- and 3-way Solenoid Valves for Gas and Liquid SV10: Vacuum to 3000 psig SV430: Vacuum to 3000 psig SV20: Vacuum to 6000 psig SV460: Vacuum to 6000 psig SV30: Vacuum to 3000 psig Circle Seal Controls
Econosto UK. www.econosto.uk.com. LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345
LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345 ABERDEEN Econosto UK Ltd Blackness Road Altens Industrial Estate Aberdeen AB12 3LH T:
MÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br
Variable Area Flowmeters
www.swagelok.com Variable Area Flowmeters G Series and M Series Glass and metal (armored) tube models, including miniature armored model Highly accurate measurement with individually calibrated scales
YELLOW JACKET Hose Adapters, Valves, and Parts right to the last detail
YELLOW JACKET Hose Adapters, Valves, and Parts right to the last detail NEW Valve core tool page 35 EXPANDED LINE Quick couplers page 36 33 1/4" 4-IN-1 BALL VALVE TOOL for vacuum, charge, cores and recovery
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
Baumann 81000 Mikroseal Control Valve
Product Bulletin D103340X012 Baumann 81000 Mikroseal Control Valve The Baumann 81000 Mikroseal control valve (figures 1 and 2) is excellent for throttling of liquid or gaseous media, particularly where
MACHINES RECOVERY SYSTEMS SUPEREVAC CHARGING HOSES VACUUM AND HOSE ADAPTERS, VALVES AND PARTS CHARGING SYSTEMS GAUGES INSTRUMENTS ELECTRONIC
RECOVERY SUPEREVAC 29 RECOVERY 1/4" 4-IN-1 BALL VALVE TOOL For vacuum, charge, cores and recovery 18997 18975 18971 18978 18979 Remove and replace Schrader cores without losing charge. Extra 1/4" side
Baumann 87000 Flexsleev Sanitary Control Valve
Product Bulletin D103345X012 Baumann 87000 Flexsleev Sanitary Control Valve The Baumann 87000 control valve (figures 1 and 2) is excellent for throttling high purity liquid or gaseous media commonly found
Thread and End Connection
www.swagelok.com and End Connection Identification Guide 2 Contents Introduction and End Connection Terminology.. 4 General Terminology... 5 Step-by-Step Identification Procedure for s and End Connections...
PVH131/141 Variable Displacement Piston Pump - 11 Design
Service Data Vickers Piston Pumps PVH131/141 Variable Displacement Piston Pump - 11 Design Revised 05/01/97 M-2209-S Maximum Adjustable Stop S Option 913341 Locknut Torque 25-50 N.m. (18-37 lb. ft.) Torque