Material Safety Data Sheet

Transcription

1 EVIDENT, INC Material Safety Data Sheet NFPA HMIS Issuing Date Revision Number NFPA/HMIS Ratings Legend 1. PRODUCT AND COMPANY IDENTIFICATION Product Name Product Code(s) Recommended Use Sani Professional TM Brand Sani-Hands Instand Hand Sanitizing Wipes MSDS0070 Other Information Supplier Address 2. HAZARDS IDENTIFICATION CAUTION! Appearance Emergency Overview Physical State Odor Potential Health Effects Principle Routes of Exposure Acute Toxicity Eyes Skin Inhalation Page 1 / 9

2 Ingestion Chronic Effects Aggravated Medical Conditions Environmental Hazard 3. COMPOSITION/INFORMATION ON INGREDIENTS Chemical Name CAS-No Weight % 4. FIRST AID MEASURES Eye Contact Skin Contact Inhalation Ingestion Notes to Physician Protection of First-aiders 5. FIRE-FIGHTING MEASURES Flammable Properties Flash Point Suitable Extinguishing Media Unsuitable Extinguishing Media Hazardous Combustion Products Sensitivity to Mechanical Impact Explosion Data Sensitivity to Static Discharge Page 2 / 9

3 Specific Hazards Arising from the Chemical Protective Equipment and Precautions for Firefighters NFPA Health Hazard Flammability Stability Physical and Chemical Hazards HMIS Health Hazard Flammability Stability Personal Precautions 6. ACCIDENTAL RELEASE MEASURES Personal Precautions Methods for Containment Methods for Cleaning Up Other Information 7. HANDLING AND STORAGE Handling Storage 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Exposure Guidelines Chemical Name ACGIH TLV OSHA PEL NIOSH IDLH Engineering Measures Personal Protective Equipment Eye/Face Protection Skin and Body Protection Respiratory Protection Page 3 / 9

4 Hygiene Measures 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Odor Threshold ph Odor Physical State Flash Point Decomposition Temperature Melting Point/Range Flammability Limits in Air Autoignition Temperature Boiling Point/Range Explosion Limits Specific Gravity Water Solubility Solubility Evaporation Rate Vapor Pressure Vapor Density VOC Content 10. STABILITY AND REACTIVITY Stability Incompatible Products Conditions to Avoid Hazardous Decomposition Products Hazardous Polymerization 11. TOXICOLOGICAL INFORMATION Acute Toxicity Product Information Irritation Chemical Name LD50 Oral LD50 Dermal LC50 Inhalation Chronic Toxicity Chronic Toxicity Carcinogenicity Chemical Name ACGIH IARC NTP OSHA Page 4 / 9

5 IARC: (International Agency for Research on Cancer) NTP: (National Toxicity Program) OSHA: (Occupational Safety & Health Administration) Sensitization Target Organ Effects 12. ECOLOGICAL INFORMATION Ecotoxicity Chemical Name Toxicity to Algae Toxicity to Fish Microtox Daphnia Magna (Water Flea) Chemical Name Log Pow 13. DISPOSAL CONSIDERATIONS Waste Disposal Method Contaminated Packaging US EPA Waste Number Chemical Name California Hazardous Waste Status 14. TRANSPORT INFORMATION DOT Page 5 / 9

6 14. TRANSPORT INFORMATION TDG MEX ICAO IATA ERG Code IMDG/IMO EmS No. RID Classification Code ADR/RID-Labels ADR Classification Code Page 6 / 9

7 14. TRANSPORT INFORMATION ADN Classification Code Special Provisions Hazard Labels Limited Quantity Ventilation Page 7 / 9

8 15. REGULATORY INFORMATION International Inventories TSCA DSL U.S. Federal Regulations SARA 313 SARA 311/312 Hazard Categories Acute Health Hazard Chronic Health Hazard Fire Hazard Sudden Release of Pressure Hazard Reactive Hazard Clean Water Act CERCLA U.S. State Regulations California Proposition 65 Chemical Name CAS-No California Prop. 65 U.S. State Right-to-Know Regulations Chemical Name Massachusetts New Jersey Pennsylvania Illinois Rhode Island International Regulations Chemical Name Carcinogen Status Exposure Limits Canada This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all the information required by the CPR. Page 8 / 9

9 WHMIS 16. OTHER INFORMATION Issuing Date Revision Note 9 Disclaimer The information provided on this MSDS is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guide for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered as a w arranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other material or in any process, unless specified in the text. End of MSDS Page 9 / 9