Accessories. Push-In Fittings - Nickel Plated Brass. N100 Series: Push-In Fittings made of Nickel Plated Brass for pneumatic and hydraulic use
|
|
- Rosamund Hines
- 7 years ago
- Views:
Transcription
1 Push-In Fittings - Nickel Plated Brass N100 Series: Push-In Fittings made of Nickel Plated Brass for pneumatic and hydraulic use - Body: Nickel-plated brass - ocking ring: Stainless Steel for - easy pipe insertion - high holding force - damageless extraction - Release sleeve: POM - Seal rings: NBR - For externally calibrated tubes: 4, 5, 6, 8, 10, 12,14 O, according to CETOP RP54P, NFE49-100/101 - Cylindrical s: with NBR O-Ring - Max. working pressure: 18 bar at 20 C (for PA11 tube) - For tubes made of: PA11 (Nylon), PU, PE, PTFE - Temperature ranges: -20 to 80 C: air, gas, mineral oil 0 to 80 C: additionally water ow to order: (example) 1 - PIPE 2 - REEASE SEEVE (POM) 3 - RING (BRASS) 4 - OCKING RING (STAINESS STEE) 5 - BUS (BRASS) 6 - INTERNA O-RING (NBR) 7 - EXTERNA O-RING (NBR) 8 - INTERNA O-RING (NBR) 9 - BUS FOR SWIVE (BRASS) 10 - SWIVE (BRASS) 11 - BOY (BRASS) N Fitting Series N = Metric Size 100 = Union Material (blank) = Nickel Plated Brass Size 004 = 4 Size 000 = 1/8" 101 = Bulkhead Union 102 = Straight 103 = Straight Conical 104 = Straight w/o external hex 005 = = = = = 1/4" 002 = 3/8" 003 = 1/2" 005 = M5 105 = Female Straight 106 = Union Elbow 107 = Union Elbow Conical 108 = Swivel Elbow 108E = Swivel ong Elbow 109 = Swivel Elbow Conical 110 = Union Tee 111 = Union Tee Conical Central 112 = Union Tee Conical ateral 113 = Swivel Branch Tee 115 = Swivel Run Tee 116 = Swivel Run Tee Conical 117 = Union Cross 118 = Plug 119 = Male Union 120 = ed to Push-In Adapter 121 = Reducer 122 = Single Banjo 012 = = = ouble Banjo 124 = Single Manifold 125 = ouble Manifold 131 = Y Union 766
2 N N N N N N N Push-In Fittings - Nickel Plated Brass Ø Straight Push-In-Fitting, to N100 - N M11 4 N M12 5 N M13 6 N M16 8 N M19 10 N M22 12 N on request 14 Ø Bulkhead Fitting, to N101 1 thread M/G Ø N /8" 4 N /4" 4 N /4" 5 N /8" 6 N /4" 6 N /8" 8 N /4" 8 N /8" 8 N /4" 10 N /8" 10 N /2" 10 N /4" 12 N /8" 12 N /2" 12 N /8" 14 N /2" 14 Straight Push-In-Fitting, Parallel, O-Ring N102 1 R N /8" 4 N /4" 4 N /8" 5 N /4" 5 N /8" 6 N /4" 6 N /8" 8 N /4" 8 N /8" 8 N /4" 10 N /8" 10 N /2" 10 N /4" 12 N /8" 12 N /2" 12 N /8" 14 N /2" 14 Ø Straight Push-In-Fitting, Conical N
3 Push-In Fittings - Nickel Plated Brass N104 Straight Push-In-Fitting, Parallel Ø O- Ring M / G 1 4 OR M N OR M N / N OR M N / N OR M N OR M / N / N / N / N / N / N / N /4 on request N /8 on request N /2 on request N N105 Straight Push-In Fittining, Female Ø Internal M / G 2 4 M N /8" N M N /8" N /4" N /8" N /4" N /8" N /4" N /4" N /8" N /4" N /8" N /2" N /2" on request N N106 N107 Push-In Fitting, Elbow, to Push-In Fitting, Elbow, Conical Ø Ø N N N N N N N R /8" N /8" N /8" N /4" N /8" N /4" N /8" N /4" N /8" N /4" N /8" N
4 Push-In Fittings - Nickel Plated Brass M/G 1 2 Ø N M N /8" N /4" N M N /8" N /4" N M N /8" N /4" N /8" N /4" N /8" N /8" N /4" N /8" N /2" N /4" N /8" N /2" N /8" N /2" Push-In Fitting, Swivel, Elbow, Parallel, O-Ring N108 G 1 1 Ø N108E /8" N108E /4" N108E /8" N108E /4" N108E /8" N108E /4" N108E /8" N108E /4" N108E /8" G 1 2 Ø N /8" N /4" N /8" N /4" N /8" N /4" N /8" N /4" N /8" N /4" N /8" N /2" N /4" N /8" N /2" N /8" N /2" Push-In Fitting, Swivel, long Elbow, Parallel, O-Ring Push-In Fitting, Swivel Elbow, Conical thread N108E N
5 Push-In Fittings - Nickel Plated Brass N110 Tee Push-In-Fitting, 3 Connects Ø N N N N N N N N111 Tee Push-In-Fitting, central conical Ø R /8" N /4" N /8" N /4" N /8" N /4" N /8" N /4" N /8" N /4" N /4" N /8" N N112 Tee Push-In Fitting, conical Ø R /8" N /4" N /8" N /4" N /8" N /4" N /8" N /4" N /8" N /4" N /8" N /4" N /8" N
6 Push-In Fittings - Nickel Plated Brass G 1 2 Ø N /8" N /8" N /8" N /4" N /8" N /4" N /8" N /4" N /8" N /2" N /4" N /8" N /2" Tee Push-In Fitting, Swivel, Parallel, central, O-Ring N113 G 1 2 Ø N /8" N /8" N /8" N /4" N /8" N /4" N /8" N /4" N /8" N /2" N /4" N /8" N /2" Tee Push-In Fitting, Swivel, Parallel, O-Ring N115 R N N N N N N Ø N /8" N /8" N /8" N /4" N /8" N /4" N /8" N /4" N /8" N /2" N /4" N /8" N /2" Ø Push-In Cross Union N117 Tee Push-In Fitting, Swivel, conical N
7 N118 Plug Push-In Fittings - Nickel Plated Brass Ø N N N N N N on request N N119 Push-In connector, to Ø N N N N N N on request N N120 N121 Adapter, Parallel, O-Ring Reducer 1 2 Ø M/G 4 M N /8" N /4" N M N /8" N /4" N M N /8" N /4" N /8" N /4" N /8" N /4" N /8" N /2" N /4" N /8" N /2" N I O T Ø Ø N N N N N N N N N N N
8 Push-In Fittings - Nickel Plated Brass 1 for Banjo bolts Ø N M5 4 N /8" 4 N M5 5 N /8" 5 N M5 6 N /8" 6 N /4" 6 N /8" 8 N /4" 8 N /4" 10 N /4" 12 Banjo, 1 Port N122 1 for Banjo bolts N M5 4 N /8" 4 N M5 5 N /8" 5 N M5 6 N /8" 6 N /4" 6 N /8" 8 N /4" 8 N /4" 10 N /4" 12 Ø ouble Banjo, 2 Ports N123 N M5 N /8" N /4" N /8" M/G Single Banjo bolt with 2 Nylon Rings N124 N /8" N /4" N /8" 1 N N N G ouble Banjo bolt with 3 Nylon Rings N125 Ø Push-In Fitting, Y-Piece, 3 Ports N
9 Push-On Fittings - Nickel Plated Brass N300 Series: Push-On Fittings made of Nickel Plated Brass - Body and nut: Brass, Nickel plated - For externally and internally calibrated tubes: 4/2; 6/4; 8/6; 10/8; 12/10 O / I - Max. working pressure: 15 bar (for PA11 tube) - Temperature ranges: -18 to 70 C 1 - BOY 2 - NUT ow to order: (example) N Fitting Series Tread Size Material Size Size N = Metric 324 = Single Banjo Bolt (blank) = Nickel Plated Brass 004 = 4/2 005 = M5 325 = ouble Banjo Bolt 006 = 6/4 000 = 1/8" 340 = Straight Conical 008 = 8/6 001 = 1/4" 341 = Straight Cylindrical 010 = 10/8 002 = 3/8" 343 = Straight Inner 012 = 12/ = 1/2" 344 = Straight 345 = Straight Bulkhead 346 = Union Elbow Conical 347 = Union Elbow Inner 348 = Union Elbow 349 = Union Elbow Cylindrical 350 = Union Tee Central Conical 351 = Union Tee ateral Conical 353 = Union Tee 354 = Union Cross 355 = Single Banjo 356 = ouble Banjo 368 = Nut 782
10 N /8" N /4" Push-On Fittings - Nickel Plated Brass G Single Banjo Bolt with 2 Nylon Rings N324 N /8" N /4" G ouble Banjo Bolt with 3 Nylon Rings N325 R C Ø N /8" /2 N /8" /4 N /4" /4 N /8" /6 N /4" /6 N /8" /6 N /4" /8 N /8" /8 N /2" /8 N /8" /10 N /2" /10 Straight Push-On Fitting, Conical N340 M/G C Ø N M /2 N /8" /2 N M /3 N M /4 N /8" /4 N /4" /4 N /8" /6 N /4" /6 N /8" /6 N /4" /8 N /8" /8 N /8" /10 Straight Push-On Fitting, Cylindrical N
11 N343 Straight Push-On Fitting, Inner Push-On Fittings - Nickel Plated Brass Ø Inner G C 4/2 1/8" N /4 1/8" N /4 1/4" N /6 1/8" N /6 1/4" N /6 3/8" N /8 1/4" N /8 3/8" N N344 Straight Push-On Fitting Ø C 4/ N / N / N / N / N N345 Bulkhead Push-On Fitting Ø C B max. 4/ x0.5 N / x1 N / x1 N / x1 N N346 N347 Angular Push-On Fitting, Conical Angular Push-On Fitting, Inner Ø Ø Extern R M N C 4/2 1/8" N /4 1/8" N /4 1/4" N /6 1/8" N /6 1/4" N /6 3/8" N /8 1/4" N /8 3/8" N Inner G E M N C 4/2 1/8" N /4 1/8" N /4 1/4" N /6 1/8" N /6 1/4" N
12 N C N /2 N /4 N /6 N /8 Push-On Fittings - Nickel Plated Brass Ø Angular Push-On Fitting N348 G M N C Ø N /8" /4 N /4" /4 N /8" /6 N /4" /6 N /4" /8 Angular Swivel Push-On Fitting Cylindrical with O-Ring N349 M C R N /8" /2 N /8" /4 N /4" /4 N /8" /6 N /4" /6 N /4" /8 Ø Push-On T, Central Conical N350 M N C R N /8" /2 N /8" /4 N /4" /4 N /8" /6 N /4" /6 N /4" /8 M C N /2 N /4 N /6 N /8 Ø Push-On T, ateral Conical N351 Ø Push-On T N
13 N354 Push-On Cross Push-On Fittings - Nickel Plated Brass Ø C 6/ N / N / N N355 Single Push-On Banjo Ø 1 C G 6/4 1/8" N /4 1/4" N /6 1/8" N /6 1/4" N /8 1/4" N N356 ouble Push-On Banjo Ø 1 C G 6/4 1/8" N /4 1/4" N /6 1/8" N /6 1/4" N /8 1/4" N N368 Push-On Nut Ø C 4/ N / N / N / N / N
14 Fittings Standard - Nickel Plated Brass N400 Series: Standard Fittings made of Nickel Plated Brass for pneumatic and hydraulic use - Body: Brass, Nickel plated - Cylindrical threads: with NBR O-Ring - NPTF types: pre-coated with solid sealant - Max. working pressure: 1/8": 150 bar 1/4": 100 bar 3/8": 75 bar 1/2": 50 bar 3/4": 80 bar 1": 80 bar ow to order: (example) N Fitting Series Fitting Material 1 2 N = Metric 411 = Seal Screw Collar (blank) = Nickel Plated Brass 005 = M5 005 = M5 IN = NPTF 412 = Seal Screw 000 = 1/8" 000 = 1/8" 430 = Reducer Conical 001 = 1/4" 001 = 1/4" 431 = Reducer Cyl. 002 = 3/8" 002 = 3/8" 438 = NPTF Male / G Female 003 = 1/2" 003 = 1/2" 439 = G Male / NPTF Female 006 = 3/4" 006 = 3/4" 441 = ouble Nipple Conical 007 = 1" 007 = 1" 442 = ouble Nipple Cyl. 008 = 1 1/4" 008 = 1 1/4" 443 = Reducer Cyl. 009 = 1 1/2" 009 = 1 1/2" 444 = Reducer Con. Male / G Female 445 = Reducer G Male / Female 448 = Reducer Bushing Conical 449 = Reducer Bushing Cyl. 450 = Coupling 451 = Reducer Coupling 787
15 N411 Push-On Fittings - Nickel Plated Brass Seal Screw Cylindrical, Internal ex Socket, O-Ring (M5-1/2); exagon, Nylon M/G E Order Code Rings (3/4 & 1) M N /8" N /4" N /8" N /2" N /4" SW N " SW N N412 IN412 Seal Screw Conical, Internal ex Socket Seal Screw NPTF Internal ex Socket pre-coated R P Order Code 1/8" 7,5 4 N /4" 10 5 N /8" 10 6 N /2" 12 8 N /4" 12 8 N " 12 8 N NPTF P Order Code 1/8" 6 4 IN /4" IN /8" 10 8 IN /2" 13 9 IN /4" 13 9 IN " on request IN /4" on request IN N430 N431 Reducer, Conical Reducer Cylindrical R 1 R 1 1/8" 1/4" N /8" 3/8" N /4" 3/8" N /4" 1/2" N /8" 1/2" N /2" 3/4" N Out. Inn. G G 1/4" 1/8" 7 N /8" 1/4" 9 N /2" 1/4" 10 N /2" 3/8" 10 N
16 1 Fittings Standard - Nickel Plated Brass Out. Inn. IN on request UNF M5 IN on request 1/8" NPTF G 1/8" IN /4" NPTF G 1/4" IN /8" NPTF G 3/8" NPTF Male / G Female Adapter pre-coated IN438 1 Out. Inn. IN G 1/8" 1/8" NPTF IN G 1/4" 1/4" NPTF IN G 3/8" 3/8" NPTF IN G 1/2" 1/2" NPTF G Male / NPTF Female Adapter IN439 Order code N /8" N /4" N /8" N /2" N /4" N " N /4" N /2" R ouble Nipple Conical N441 Order code N /8" N /4" N /8" N /2" Order code 1 G N /8" 1/4" N /8" 3/8" N /4" 3/8" N /4" 1/2" N /8" 1/2" G ouble Nipple Cylindrical N442 G Reducer Cylindrical N
17 N444 Reducer Conical Outer-Inner Cylindrical Fittings Standard - Nickel Plated Brass Out. R Inn. G 1 1/8" 1/4" N /8" 3/8" N /4" 3/8" N /4" 1/2" N /8" 1/2" N N445 Reducer Cylindrical Outer to Inner Out. G Inn. G 1 M5 1/8" N /8" 1/4" N /8" 3/8" N /4" 3/8" N /4" 1/2" N /8" 1/2" N N448 Reducer Bushing Conical 1 Out. R Inn. G 1/4" 1/8" N /8" 1/8" N /8" 1/4" N /2" 1/8" N /2" 1/4" N /2" 3/8" N /4" 1/2" N " 1/2" N N449 Reducer Bushing Cylindrical Out. R Inn. G 1/8" M N /4" 1/8" 8 13 N /8" 1/8" 9 14 N /8" 1/4" 9 14 N /2" 1/8" N /2" 1/4" N /2" 3/8" N /4" 1/2" N " 3/4" N
18 E Order code N /8" N /4" N /8" N /2" Fittings Standard - Nickel Plated Brass G Coupling N450 Order code 1 G N /4" 1/8" N /8" 1/8" N /8" 1/4" N /2" 1/8" N /2" 1/4" N /2" 3/8" G Reducer Coupling N
19 Seal Rings RA RN RN Aluminium Seal Ring, Smooth Nylon Seal Ring, Smooth Nylon Seal Ring, Toothed Ø 1 2 S M RA-005 1/8" RA-000 1/4" RA-001 3/8" RA-002 1/2" RA-003 3/4" RA-006 1" RA-007 Ø 1 2 S M RN-005 1/8" RN-000 1/4" RN-001 3/8" RN-002 1/2" RN-003 3/4" RN-006 1" RN-007 Ø 1 2 S M RN-005 1/8" RN-000 1/4" RN-001 3/8" RN-002 1/2" RN-003 3/4" RN-006 1" RN
Metric Composite Push-In Fittings
Metric Composite Push-In Fittings Version 2013 1.0 3058 Ranchview Lane North. Plymouth, MN 55447 Polyconn now offers a Metric fitting composite line to complement our inch composite fittings. They can
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationFITTINGS 5-01. 82A series Aluminium (light weight) compression fittings Ø 6... 42 mm tube size, BSPP and BSPT thread
FITTINS 82 series luminium (light weight) compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 82 series rass compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 83 series luminium
More informationAccessories Fittings, Flow Controls, Mufflers, Pressure Switches & Replacement Parts
Accessories Fittings, Flow Controls, Mufflers, Pressure Switches & Replacement Parts www.numatics.com Table of Contents Accessories World Fittings 3-7 NPTF/Inch Tube Fittings 8-14 Metric Fittings 15-20
More informationTransport & Automotive CATALOGUE. March 2011. Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au. www.tubefit.com.
Transport & Automotive CATALOGUE Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au March 2011 www.tubefit.com.au Page 1 4 6 9 12 14 16 17 19 20 22 23 24 26 28 29 31 33 Index
More informationDouble-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP. Feed Water Connector 1. 1/2" FIP x 1/2" MIP x 1/4" OD 2. 3.
Picture Item No. Description RO- 0010 Brass Water Feed 1. 3/4" FIP with 1/4" hole 2. Using on R.O. tank RO- O020 Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP RO- 0030 Brass
More informationHose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
More informationTemperature Adaptor. Vacuum Tree
Temperature Adaptor Temperature Adaptor Temperature Adaptor B0N Ford XY on 6 cyl B02N Ford XF on 6 cyl B0N Ford XE-XF 6 cyl B0N Ford 20 Eng. Tree of 2 BN Ford 20 Eng. Tree of BP Ford 20 Eng. Tree of Water
More informationPRODUCT CATALOGUE. burnettandhillman.co.uk &HYDRAULIC ADAPTORS. Burnett & Hillman Havyat Road, Wrington, Bristol BS40 5AE United Kingdom
burnettandhillman.co.uk 2014 HYDRAULIC ADAPTORS Burnett Hillman Havyat Road, Wrington, Bristol BS40 5AE United Kingdom PRODUCT CATALOGUE T: +44 (0)1934 862596 F: +44 (0)1934 862616 E: sales@burnettandhillman.co.uk
More informationParts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!
Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm
More informationWorking Pressure up to 630 bar / 9135 PSI
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30 / 931 630 / 9135
More informationHose and Tube Fittings Series 1-3
Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose
More informationGAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
More information3/2-way Mini Solenoid Valve
3/2way Mini Solenoid Valve Directacting 0... bar DN mm... DN mm,,, subbase, banjobolt connection 21mm coil spacing when mounted on manifold Type can be combined with... Type 20 Type 207 Type able plug
More informationCajon VCR Fittings. Flanges, Fittings, & Components. Cajon & Swagelok Fittings. Cajon VCR Fittings. Nuts, Caps, & Plugs. Socket Weld Glands
Cajon VCR Fittings Cajon VCR Fittings Make excellent low-pressure gas connections Ideal for lecture bottle gas cylinders, standard helium checks, and general gas plumbing Withstand bakeout to 58º C (with
More informationFlare Fittings. The World Standard. SAE 45 Flared Fittings... D4. Inverted Flared Fittings... D14. Access Valves... D18
Flare Fittings SAE 45 Flared Fittings... 4 Inverted Flared Fittings... 14 Access Valves... 18 The World Standard Flare Fittings Flare to ale PT 48F ale Connector 481FH ale Connector AVU1 ale Connector
More informationStainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
More informationPipe Valves, Fittings and Nipples Pressures to 15,200 psi
Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by
More informationML11428-70 (Click to View Entire Section PDF File No Links MR70-MR70Z) GENERAL ORDER PAGE for - "Miscellaneous Items"
ORDER PAGE Harnesses Pigtails Fittings Fuse Holders & Fuse Kits Miscellaneous Repair Kits Buzzers & Chimes Transmission Neutral Park Switch Detectors Band Clamps Oil for Hydraulic Systems HWH PARTS MANUAL
More informationAutomated Lubrication Systems Parts & Accessories
Automated Lubrication Systems Parts & Accessories (Truck and Trailer) Groeneveld USA, Inc. 2150 S. Central Expy. Suite 200 McKinney, TX 75070 Tel: 800.586.7283 Fax: 330.225.5213 Groeneveld USA, Inc. 2150
More informationORLANDO srl. M P R 50 025 OPTIMA Radial pressure gauges for swimming-pools 0-2,5 Bar
Chiavari (Ge) - Italia Tel.: Italia + 0185 + 38.50.10 Fax: Italia + 0185 + 38.50.11 e-mail: orlando@orlando.it Http://www.orlando.it M R 50...: Radial pressure gauge ø 50 ( available scale in bar: 4, 6,10,12,16
More informationHome. News. Products. Contact Us. Treated Swagelok Fittings--for better inertness!
New GC Accessories New GC Accessories New GC Accessories Fittings: Swagelok : Home Brass & Stainless Steel News Also available: Products Silco Fittings : Siltek & Sulfinert Also available: Info & Support
More informationCUTTER-CRUSHER RAMMER RC 22
11/99 PARTS MANUAL PMRC22EN.A99 CUTTER-CRUSHER RAMMER RC 22 SERIAL NO. RC22BC0015-UP RC22RC0021-UP TABLE OF CONTENTS 1. Cylinder RC 22.......................................................... 4 2. Hydraulics
More informationMetric Tube Fittings
Metric Tube Fittings Index Introduction 2 Terms & Conditions 3 Connectors teel 4 tainless teel 22 Tube teel 35 tainless teel 36 Technical ection Assembly Instructions 37-38 Tube pecifications 39-41 Conversion
More informationGROENEVELD AUTOMATIC GREASING SYSTEMS
GROENEVELD AUTOMATIC GREASING SYSTEMS TWIN Parts & Accessories Book Pumps, Fittings, Injectors, Lining, etc. www.groeneveld-group.com 1 TWIN ELECTRICAL Item Part # Description 1 F113966 Switch 24V 2 F122991
More informationPneu-Edge. Fittings. Features. Materials. Pneumadyne s Stainless Steel Pneu-Edge fittings are suitable for use in industries such as:
Features l Twelve barb sizes l Ten thread sizes l Captured O-ring design l Smaller shank l Smoother tubing approach angle l Solderless joint technology l Larger thru-hole l Consistently sharp barbs Pneu-Edge
More informationElectrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv)
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Order code Series and function M-05-310-HN-442 Standard coil HN at ports 2 + 4 HN at ports
More informationComplete Systems & Parts Automatic Oiler & Grease Bank
MADE IN THE USA Complete Systems & Parts Automatic Oiler & Grease Bank www.gosuburban.com 2 Lubrication Systems Lubrication Systems, a division of Suburban Manufacturing, manufactures a complete line of
More informationMÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br
More informationHow To Maintain A Gardner Dianner Pump
GARDNER DENVER 3-1-541 Rev D April, 2005 HD-2250 WELL SERVICE PUMP POWER END PARTS LIST ECN 1025185 MAINTAIN PUMP RELIABILITY AND PERFORMANCE WITH GENUINE GARDNER DENVER PARTS AND SUPPORT SERVICES Gardner
More informationMikrotherm. Manual radiator valves. To be precise.
Manual radiator valves To be precise. Description HEIMEIER Mikrotherm manual radiator valves made of corrosion-resistant gunmetal, with white plastic hand wheel cap, tight-packed with protection film.
More informationGYROLOK to Tube Union
GYROLOK HOKE manufactured GYROLOK tube fittings have been carefully designed and manufactured to provide a wide range of outstanding leak-tight application capabilities. GYROLOK to Tube Union MANUFACTURED
More informationVe-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
More informationSealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System
Revised Sept--22-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Description The sealed circular RJ45 connector system is designed for use in harsh environments. The connector
More informationSeries M Applicable Tubing: ø2 Connection Thread: M3, M5
iniature Fittings Series pplicable Tubing: ø2 onnection Thread:, RoHS ade to Order (Refer to page for details.) pplicable O.D. x I.D.: ø2 x ø.2 onnection thread: / One-touch fitting size: ø.2 / ø Tubing
More informationwith installation dynafact boost GAUGE this manual is for use with systems 64050-64054
owners manual with installation instructions dynafact boost GAUGE this manual is for use with systems 64050-64054 GENERAL INSTALLATION PRACTICES This manual is an installation guide for all 1. Banks DynaFact
More informationSingle sub-base valve
solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet
More informationCRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
More informationHOSES COMPOSITE HOSES & FITTINGS HOSES. Pag. 5J533 TANK CLEANING 10 BAR (150 PSI) BS5842 ARRETE' ADR ANNEXE 1
COMPOSITE S & FITTINGS Pag. S S 5J533 TANK CLEANING 10 BAR (150 PSI) 5J551 CHEMICALS SUCTION AND DISCHARGE - STANDARD WEIGHT - 10 BAR (150 PSI) 5J553 CHEMICALS SUCTION AND DISCHARGE - STANDARD WEIGHT -
More informationGeberit Mapress Catalogue 2008 / 2009. Valid from 1 April 2008
Geberit Mapress Catalogue 2008 / 2009 Vali from 1 April 2008 Mapress Stainless Steel Page 3 Mapress CrNi Steel Page 23 Mapress Stainless Steel silicone-free Page 25 Mapress Stainless Steel Gas Page 39
More informationBody Size 1/4" up to 1" ISO A-Profile 6600-Series TEMA ISO A
Ball ocking TEM ISO ISO 7241-1 Series ISO B 1/4" up to 1" ISO -Profile 6600-Series ISO F Technical escription The couplings of the 6600 series meet the requirements and dimensions of the ISO 7241-1 standard.
More information2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:
More informationB 246 Assembly instructions
B 246 Assembly instructions VOSS quick connect system 246 for diesel fuel systems in automotive engineering These assembly instructions are intended for qualified fitters of fuel systems in automotive
More informationMetric Hydraulic Compression Tube Fittings
Metric Hydraulic Compression Fittings T A B L E O F C O N T E N T S Introduction Index Pages A to F Pages G to L FITTINGS to Unions Straight Male Connectors Elbow Male Connectors Run Tee Male Connectors
More informationMany Products...One Source
PRESSURE GAUGES Dedicated Sales Rep for Your Area 97%Fill Rate Shipping within 24 Hours State of the Art Warehouse System Technical Support Quality Control Program 25 Whaley Avenue Milverton, Ontario N0K
More informationA New Improved Range of Push-fit Fittings for Cold Water Services
A New Improved Range of Push-fit Fittings for Cold Water Services A new improved range of Push-fit Fittings for Cold Water Services, with Stainless Steel Teeth to grip the pipe Push-fit Fittings for Cold
More informationHYDRAULIC PIPING STANDARD HANDBOOK. Revision 1
HYDRAULIC PIPING STANDARD HANDBOOK Revision 1 Preface We aim to fill a gap in technical literature. At this moment there are no hydraulic piping standards available which cover different pressure classes
More informationUNIVERSAL 1550 PRE-MIX DISPENSER
MODEL NO. 284974xxx 1 of 8 Control Code A ªIMI Cornelius Co., 1987-95 22 5 6 2 3 7 4 1 26 32 19 28 33 29 27 11 15 18 16 17 14 9 31 30 34 24 20 23 8 10 21 13 FIGURE 1. ASSEMBLY ªIMI Cornelius Co., 1987-95
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More information3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
More informationTBi Industries. MIG / MAG Welding torches TBi Expert 0. 1
TBi Industries MIG / MAG Welding torches TBi Expert 1 0. 1 CONTENTS. TBi Expert Gas cooled torches TBi 150 Classic Series 60% (10 min.) Mix : 150 A CO 2 : 180 A Ø 0.6-1.0 mm Water cooled torches TBi 240
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
More informationSOURIAU s discrete wire sealing
SOURIAU s discrete wire sealing Description Using proven grommet technology from SOURIAU s extensive knowledge of harsh environments, the UTO & UTS connectors with grommet garantie a discrete wire sealing
More informationWorld Bridge Replacement Parts for EMD 567 and 645 Diesel Engines
40000927-WB REPAIR KIT, WATER PUMP 40005124-WB MAIN & ROD BEARING KIT, 16 CYLINDER 40005125-WB MAIN & ROD BEARING KIT, 20 CYLINDER 40006129-WB PISTON, 645E HTG AND TIN PLATED 40006130-WB PISTON, 645 E3
More informationNewloc Acetal. Plastic Push-to-Connect Fittings. Fluid Transfer Specialists
Newloc Acetal Plastic Push-to-Connect Fittings Fluid Transfer Specialists Newloc Acetal Extremely easy to install no tools necessary Certified by the National Sanitation Foundation (NSF-1 and NSF-1) Instant
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationNumber Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More information3", 4", 6" & 8" Model H Series Alarm Check Valve Installation and Maintenance Guide
", ", " & " Model H Series Alarm Check Valve Installation and Maintenance Guide 077 AIRPARK DRIVE STANDISH, MICHIGAN PHONE 99-- 00-2-0 FAX 99--92 www.globesprinkler.com OCTOBER 2 C- BULLETIN A.C.V.I.M.,
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
More informationOperating Instructions
Operating Instructions Cable Glands Ex d and Ex e with Compound > Contents 1 Contents 1 Contents...2 2 General Information...2 3 General Safety Information...3 4 Designated Use...4 5 Technical Data...4
More informationMDT5N25 & MTD5N40 SERVICE PARTS
MDTN & MTDN0 SERVICE PARTS This parts list contains the service parts and wiring diagrams for this model. Check the model number of the machine requiring the parts to be sure that this is the correct parts
More informationTimes Microwave Systems Hermetically Sealed Assemblies
SCOPE This Specification details the Electrical, Mechanical and Environmental Characteristics of Times Microwave Systems MILTECH 340.34 Diameter Hermetically Sealed Coaxial Transmission Lines. This product
More informationFluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
More informationProduct Catalogue Australian Plumbing Fittings
Capillary Sizes ELBOWS - 90 Degree J08123 15mm x 15mm 90Deg LE Cu SR ELB F+F (No. 12) J08131 18mm x 18mm 90Deg LE Cu ELB F+F (No. 12) J08145 20mm x 20mm 90Deg LE Cu SR ELB F+F (No. 12) J08147 20mm x 15mm
More informationSelf-operated Temperature Regulators Temperature Regulator Type 1u
Self-operated Temperature Regulators Temperature Regulator Type u Application Temperature regulators for cooling installations Control thermostats for set points ) from 0 to 250 C G ½ to G or DN 5 to 50
More informationDeviceNet, minifast Conduit Adapters
DeviceNet, minifast Conduit Adapters Gasket and Mounting Screws Provided Same Housing Style for Single or Double Port Housing Part Number Specs Application Pinout BCA 57-M123 conduit body* for transition
More informationFront axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
More informationAIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
More informationValve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
More informationINSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS
INSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS SETTING UP THE PRESS FOR OPERATION For shipping convenience, the gauge, pump handle, hoist crank, screw nose and base angles
More informationRTD Temperature Probe for the Food/Pharmaceutical Industry
sales@jumo.co.uk Data Sheet 902810 Page 1/9 RTD Temperature Probe for the Food/Pharmaceutical Industry For temperatures between -50 and +250 C Protection type up to IP69 according to DIN EN 60529 (IP69K
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
3/2-, 5/2-5/3-way Solenoid Valves for process pneumatics Type 6518 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 6518/6519 can be combined with... Stard-,
More informationHose & Coupling Solutions Dixon Europe
Hose & Coupling Solutions Dixon Europe The Story so far......the Dixon Group is a world leading supplier of hose and coupling products. It prides itself on its reputation for quality and innovation. It
More informationLinear Luminaire with LED Series EXLUX 6402/2
> Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or side entry lamp > Central locking > All-pole disconnection by means of an N/C switch when the
More informationBimetal thermometer Model 52, industrial series
Mechanical temperature measurement Bimetal thermometer Model 52, industrial series WIKA data sheet TM 52.01 for further approvals see page 6 Applications A wide range of applications in machine building,
More informationValve systems Base plates, according to standard ISO 5599-1. Brochure
ISO 5599-1 Brochure 2 ISO 5599-1 Single subbase Single subbase, thread connections on the side standard: ISO 5599-1 Frame size: ISO 1 - ISO 4 compressed air connection output: G 1/4 - G 1 Reversed pressure
More informationFLO W C ONTROLS. OPTIO NS: Electroless Nickel Plated Stem Viton Seals BSPT & Metric O D Tube Connections Knurled A luminum Knob w ith Locknut
A ngle Flo w C ontrols A ngle Flo w Control valves are designed to provide accurate flo w control in a compact, labor saving package. Features like built in push-in fittings, pre-applied thread sealant,
More informationPlumbing Lesson Five: Pipe Fittings and Parts. Student Handouts
Lesson Five: Pipe Fittings and Parts Student Handouts Building Basics was paid for under an EL Civics grant from the U. S. Department of Education administered by the Virginia Department of Education.
More information4 Posiflow Proportional Solenoid Valves
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
More informationHydraulic Compressor Module
Down Force Circuit 3/8 PTC Ports Hydraulic Compressor Module (Top 2 Shown With Plugs) Lift Force Circuit Tank Drain (Pull Cord) 10 Gallon Air Tank Down Pressure Gauge Lift Pressure Gauge 3/8 Quick-Connect
More informationVOYAGER 570G. 744A Sprayer Control
VOYAGER 570G 744A Sprayer Control U S E R M A N U A L U S E R M A N U A L Table of Contents CHAPTER 1 - INTRODUCTION...1 SYSTEM CONFIGURATIONS...1 KIT CONTENTS...3 CONTROL HOUSING ASSEMBLY...5 CHAPTER
More informationBROEN UNiFlEx FiTTiNgs FOR BURNiNg gases OEN OEN ifl ifl FOR FOR BURN BURN gas gas
BROEN UNIFLEX Fittings FOR BURNIN ASES BROEN UniFlex TM Fittings for burning gases BROEN UniFlex TM Fittings for burning gases LAB Table of Contents Content Page Table of Content 2 Product Overview 3 BROEN
More informationPPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
More informationLubricant distributors
Lubricant distributors Product series AB, 341, 340, 351, 350, 391, 390, VR, 321, VN, 370, 361 For oil, fluid grease, and grease For use in SKF MonoFlex single-line centralized lubrication systems SKF MonoFlex
More informationSIMPLAIR PIPING. www.irtools.com 1-800-376-TOOL
SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.
More informationS GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
More informationRefrigeration and air conditioning Date: 10/2013
Catalogue 40 WEH Connectors for filling, evacuating and testing of refrigeration and air conditioning components Refrigeration and air conditioning Date: 10/2013 WEH - We Engineer Hightech All rights reserved,
More information800-348-8467 www.fittingsunlimited.com
Thread and Port Identification Guide 800-348-8467 www.fittingsunlimited.com INDEX Index... 1 Explanation of Symbols... 2 How to Measure Threads... 3-4 Metric vs English Threads... 5 North American Connections
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
More informationTrouble shooting guide
guide DPR/PSR Leak Insuffi ciently tightened, shallow bite Tighten the nut according to correct number of turns, direct assembly only for maintanance/repair, use of recommended pre-assembly machines Mark
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More informationPower Cube Open Source Ecology Page 1. Power Cube. Version 4
Power Cube Open Source Ecology Page 1 Power Cube Version 4 Power Cube Open Source Ecology Page 2 Contents Table of Contents Power Cube... 1 Contents...2 Introduction... 3 Bill Of Materials...4 Discrete
More informationInstallation instruction CASAFLEX - Connecting piece DN 100
1 CASAFLEX - 11 10 114,3 x 4,5 3 5 2 4 1 7 6 8 12 9 Do not begin work until you have read the installation instruction carefully. 1 internal backing sleeve 2 graphite packing 3 connecting piece 4 thrust
More informationChapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
More informationGE Druck. Hand Pumps Pneumatic/Hydraulic hand pump Product Guide. Pneumatic hand pumps from -1 to 60 bar. Hydraulic hand pumps from 0 to 1000 bar
g Hand Pumps Pneumatic/Hydraulic hand pump Product Guide GE Druck Pneumatic hand pumps from -1 to 60 bar Hydraulic hand pumps from 0 to 1000 bar Controlled pressure release and adjustment Adjustable pressure
More information7.1. Part Lists. Hardware Insertion Machine. Instructions. Instructions
Instructions Instructions The Parts in this section of the manual are listed by Item Number, Part Number, Description and Quantity. The Item Numbers are in a circle with an arrow pointing to the specific
More informationHigh Pressure Equipment High Pressure Valves, Fittings and Tubing
igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle
More informationNow Available in Black Zinc Nickel
847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances
More informationChief S21M PARTS MANUAL. 2005 Chief Automotive Technologies
Chief SM 00 Chief Automotive Technologies Chief s Limited One-Year Warranty & Liability CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies, Inc. warrants for one year from date
More informationStainless Steel Tubular Products
Stainless Steel Tubular Products r Disclaimer This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary
More information