HIGH PRESSURE - valves. VDM6 type
|
|
- Camron Melton
- 7 years ago
- Views:
Transcription
1 HIGH PRESSURE - valves Hydraulic directional control valves VDM6 type Flow rate: Liquids viscosity: Max. working : Working temp.: Body - cast iron Spools - nickel plated hardened steel NBR 45 l/min From 10 cst up to 400 cst (recommended 12 75) 350 bar From -20 C up to +85 C Monoblock spool directional control valves designed for hydraulic systems used in cranes, hoists, construction, agricultural and industrial machines. Equipped with double-acting actuator spools as a standard. Spools for singleacting and hydraulic actuators are assembled on request. number of working section type of control overflow valve connection [BSP] pump tank receiver SA lever yes (175 bar) 1/2 SA lever yes (175 bar) 1/2 SA lever yes (175 bar) 1/2 SA lever yes (175 bar) 1/2 Other types of hydraulic directional control valves VDM8 VD6A VD8A VD10A, VD12A type version nominal flow rate [l/min] maximum max. number of the working section VDM8 monoblock VD6A sectional VD8A sectional VD10A sectional VD12A sectional
2 HIGH PRESSURE - valves Hydraulic directional control valves YFM35, YFM55 type Body - cast iron Spools - hardened steel Max. working : NBR bar Max. return pressure: 25 bar Working temp.: From -20 C up to +80 C Monoblock spool directional control valve with a manual lever and centring springs. Designed for hydraulic systems used in cranes, hoists, construction, agricultural and industrial machines. Equipped with C type safety valve (set at 140 bar) and type 1 spool as a standard. number of work. sections TL-YFM35/1-C-1 1 TL-YFM35/2-C-11 2 TL-YFM35/3-C TL-YFM35/4-C TL-YFM35/5-C TL-YFM35/6-C TL-YFM55/1-C-1 1 TL-YFM55/2-C-11 2 TL-YFM55/3-C TL-YFM55/4-C TL-YFM55/5-C TL-YFM55/6-C safety valve type C C nominal flow YFM35 type 45 l/min YFM55 type 60 l/min connection port P (pump) T (tank) A, B (receiver) BSP female 1/2 BSP female BSP female 1/2 BSP female BSP female 1/2 BSP female safety valve types A type (without a valve) B type (40 80 bar) C type ( bar) D type (160 bar) s 1 type 2 type 3 type Code structure YFM35 / 2 - B hydr. directional control valve type no. working sections safety valve type section 1 section 2 857
3 HIGH PRESSURE - valves Hydraulic directional control valve YE45 type Max. working : Max. return pressure: Control voltage: Working temp.: Body - iron cast Spools - hardened steel NBR 250 bar 25 bar 12V DC From -20 C up to +80 C Monoblock spool directional control valve with electrically controlled centring springs. Designed for hydraulic systems used in cranes, hoists, construction, agricultural and industrial machines. Equipped with C type safety valve (set at 140 bar) and type 1 spools. number of work. sections TL-YE45/1-C-1 1 TL-YE45/2-C-11 2 TL-YE45/3-C TL-YE45/4-C TL-YE45/5-C TL-YE45/6-C safety valve type C nominal flow 45 l/min connection port P (pump) T (tank) A, B (receiver) BSP female BSP female BSP female safety valve types A type (without valve) B type (40 80 bar) C type ( bar) D type (160 bar) s 1 type 2 type 3 type structure YE45 / 4 - B hydr. directional control valve type no. working sections safety valve type section 1 section 2 section 1 section 2 858
4 HIGH PRESSURE - valves Hydraulic directional control valve NG6, NG10 type Max. working : Control voltage: Working temp.: Body - steel Spool - hardened steel NBR bar 24V DC From -20 C up to +80 C Monoblock spool directional control valve, electrically controlled, with centring springs designed for panel mounting. Used in hydraulic systems of industrial machines. Supplied with O-rings and mounting screws as a standard. Plugs are equipped with LEDs indicating status of power supply. nominal flow main view TL-NG6-E-24DC TL-NG6-G-24DC TL-NG6-H-24DC TL-NG6-J-24DC TL-NG6-HA-24DC TL-NG6-D-24DC TL-NG10-E-24DC TL-NG10-G-24DC TL-NG10-H-24DC TL-NG10-J-24DC TL-NG10-HA-24DC TL-NG10-D-24DC 60 l/min 120 l/min NG6 type NG10 type E G H J HA D E G H J HA D E type G type H type J type HA type D type Code structure NG10 - E - 24DC hydr. directional control valve type control voltage 859
5 HIGH PRESSURE - valves Assembly plates PNG6, PNG10 Steel Max. working : 350 bar Panel mounting plates PNG6 and PNG10 allows to connect valves designed for plate mounting with high pressure hose assemblies. picture type connection port description TL-PNG6-D38 PNG6 BSP female For connection of directional valve NG6 type with hose assemblies. Connection ports located on the bottom part of the plate. TL-PNG6-B38 PNG6 BSP female For connection of directional valve NG6 type with hose assemblies. Connection ports located on the side parts of the plate. TL-PNG10-D12 PNG10 1/2 BSP female For connection of directional valve NG10 type with hose assemblies. Connection ports located on the bottom part of the plate. picture 1 type 2 type description TL-PNG10/6 PNG10 PNG6 Adaptor PNG10 / PNG6 860
6 HIGH PRESSURE- pumps Gear pumps SALAMI 2 PE group Body - aluminium Mounting plate - cast iron Rear cover - cast iron NBR (Viton - option) Liquid viscosity: from 12 cst to 800 cst (recommended 17 65) Working temp.: From -15 C up to +85 C (NBR) Displacement external gear pumps, designed for hydraulic systems in machines and devices. Available as a single or multi-stream pump. unit efficiency [cm 3 /rev] nominal efficiency* [l/min] nominal rotational speed [r.p.m.] max. working pressure SA-2PE4,5D-P60P1 ** 4,6 6, SA-2PE6,2D-P60P1 ** 6,5 9, SA-2PE8,3D-P28P1 8,2 11, SA-2PE8,3D-P60P1 ** 8,2 11, SA-2PE11,3D-P28P1 11,5 16, SA-2PE13,8S-B25B1 13,8 19, SA-2PE16D-B25B1 16,6 23, SA-2PE16/11,3S-B25B5 16,6 / 11,5 23,7 / 16, / 250 SA-2PE19D-P28P1 19,4 27, SA-2PE22,5D-P28P1 22,9 32, * - estimated efficiency at nominal rotational speed ** - rear pump designed for mounting of multi-stream pump Code structure of 2 PE type pumps 2 P E 8,3 D - P 28 P1 Size Function P - pump M - motor Type - efficiency 4,5-4,6 cm 3 /rev 6,2-6,5 cm 3 /rev 8,3-8,2 cm 3 /rev 4,5-4,6 cm 3 /rev 10,5-10,6 cm 3 /rev 11,3-11,5 cm 3 /rev 12,5-12,5 cm 3 /rev 13,8-13,8 cm 3 /rev 16-16,6 cm 3 /rev 19-19,4 cm 3 /rev 22,5-22,9 cm 3 /rev 26-25,8 cm 3 /rev Series Direction of rotation D - clockwise S counter clockwise R- reversible Inlet and outlet P - European B - German G - British (BSP) R - American (UNF) Base plate P1 - European standard B1 - German standard Ø 80 B2-B3 - German standard Ø 52 B4-B5 - German standard Ø 50 S2 - SAE A for 2 screws S6 - SAE A 2 screws (O-ring) K1-4 s to Perkins engine Drive shaft 02 - tang drive for diesel motor 03 - tang drive for electric motor 25-1:5 tapered 28-1:8 tapered 52 - SAE A9T 16/32 DP splined 54 - SAE A11T 16/32 DP splined 60 - DIN 5480 splined hole 62-9 teeth DIN 5482 splined 82 - SAE A 5/ SAE A 3/4 861
7 HIGH PRESSURE- pumps Gear pumps SALAMI 3 PB group Body - aluminium Base plate - aluminium Rear cover - iron cast NBR (Viton - option) Liquid viscosity: From 12 cst to 800 cst (recommended 17 65) Working temp.: From -15 C up to +85 C (NBR) Displacement external gear pumps, designed for hydraulic systems in machines and devices. Available as a single or multi-stream pump. unit efficiency [cm 3 /rev] nominal efficiency* [l/min] nominal rotational speed [r.p.m.] max. working pressure SA-3PB38D-P38P2 38,7 55, SA-3PB46D-P38P2 46,9 66, SA-3PB55D-P38P2 54,1 77, * - estimated efficiency at nominal rotational speed Code structure of 3 PB type pumps 3 P B 38 D - P 38 P2 Size Function P - pump M - motor Series Direction of rotation D - clockwise S - counter clockwise. R - reversible Base plate P2 - European standard Ø 50.8 P3 - European standard Ø 60.3 B6 - German standard Ø 105 S3 - SAE B for 2 screws Ø Z1-4 screws to the gearbox ZF Ø 80 type Type - efficiency 21-20,6 cm 3 /rev cm 3 /rev 33-33,5 cm 3 /rev 38-38,7 cm 3 /rev 46-46,9 cm 3 /rev 55-54,1 cm 3 /rev 65-63,1 cm 3 /rev 75-73,4 cm 3 /rev Inlet and outlet P - European B - German G - British (BSP) R - American (UNF) Drive shaft 05 - tang drive for electric motor 35-1:5 tapered 38-1:8 tapered 48-1:8 tapered (only with P3) 55 - SAE B13T 16/32 DP splined 56 - SAE B15T 16/32 DP splined 63 - DIN 5482 splined 66 - DIN 5462 splined 87 - SAE B 7/8 88 -SAE BB 1 862
8 HIGH PRESSURE- pumps Flange connectors Working temp.: Zinc-plated steel (standard), AISI 316L steel (option) From -20 C up to +100 C (NBR seal), from -20 C up to +200 C (Viton seal) Compact flange connectors with square flange heads, circle from 26 mm up to 72.5 mm with metric and BSP s used to connect hydraulic pumps. Equipped with a set of s, washers and O-rings as a standard. Flange connector with 4 holes / DIN flange connector with 4 holes / DIN 2353 circle pipe O.D HK-A-35-10L 10 16x1,5 HK-A-35-12L 12 18x1, HK-A-35-15L 15 22x1,5 HK-A-35-16S 16 24x1,5 HK-A-40-15L 15 22x1,5 100 HK-A-40-18L 18 26x1,5 250 HK-A-40-20S x2 HK-A-40-22L 22 30x2 100 HK-A-40-28L 28 36x2 HK-A-55-20S 20 30x2 250 HK-A-55-25S 25 36x2 55 HK-A-55-30S 30 42x2 100 HK-A-55-35L 35 45x2 4xM6 4xM8 circle pipe O.D HK-A L 10 16x1,5 HK-A L 12 18x1, HK-A L 15 22x1,5 HK-A S 16 24x1,5 100 HK-A L 15 22x1,5 HK-A L 18 26x1,5 250 HK-A S x2 100 HK-A L 22 30x2 HK-A L 28 36x2 HK-A S 20 30x2 250 HK-A S 25 36x2 HK-A S 30 42x HK-A L 35 45x2 250 HK-A S 38 52x2 100 HK-A L 42 52x2 4xM6 4xM8 Square flange connector with 4 holes / BSP male 60 Square flange connector with 4 holes / BSP female 300 circle HK-A-BZ /2 4xM6 HK-A-BZ /4 4xM8 HK-A-BZ HK-A-BZ xM circle HK-A-BW xM6 HK-A-BW /2 4xM8 HK-A-BW /4 HK-A-BW /4 4xM10 863
9 HIGH PRESSURE- pumps Flange connectors 90 flange connector with 4 holes / BSP male flange connector with 4 holes / BSP female 250 circle HK-A-BZ HK-A-BZ /2 HK-A-BZ /4 HK-A-BZ HK-A-BZ /2 40 HK-A-BZ /4 HK-A-BZ HK-A-BZ /2 HK-A-BZ /4 HK-A-BZ xM6 4xM8 250 circle HK-A-BW HK-A-BW /2 HK-A-BW HK-A-BW /2 HK-A-BW /4 HK-A-BW /2 HK-A-BW /4 HK-A-BW xM6 4xM8 90 flange connector with 4 holes / BSP female (aluminium) 90 flange connector with 3 holes / BSP female (aluminium) 180 circle HK-A-BW AL 30 HK-A-BW AL 1/2 HK-A-BW AL 35 HK-A-BW AL 1/2 HK-A-BW AL 1/2 40 HK-A-BW AL 3/4 HK-A-BW AL 3/4 55 HK-A-BW AL 1 4xM6 4xM8 180 circle HK-B-BW AL 26 HK-B-BW AL 1/2 HK-B-BW AL 30 HK-B-BW AL 1/2 HK-B-BW AL 1/2 40 HK-B-BW AL 3/4 HK-B-BW AL 3/4 51 HK-B-BW AL 1 3xM5 3xM6 3xM8 3xM10 864
10 HIGH PRESSURE- pumps Flange connectors 90 flange connector with 3 holes / BSP female 300 circle HK-B-BW HK-B-BW /2 HK-B-BW HK-B-BW /2 HK-B-BW /2 40 HK-B-BW /4 HK-B-BW /4 51 HK-B-BW HK-B-BW /4 56 HK-B-BW HK-B-BW HK-B-BW /4 HK-B-BW /4 72,5 HK-B-BW /2 3xM5 3xM6 3xM8 3xM10 3xM12 865
SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
More informationPRODUCT CARD GEAR PUMPS AND MOTORS ORS GROUP 1 E0.14.0503.02.01 TM GEAR PUMPS AND MOTORS GROUP 1 INDEX Page 1 - GENERAL INDEX Page 2 - Features - Quick guide Page 3 - Features - General - Working conditions
More informationPRODUCT CARD GEAR PUMPS AND MOTORS ORS GROUP 3 E0.17.0703.02.01 TM GEAR PUMPS AND MOTORS INDEX Page 1 - GENERAL INDEX Page 2 - Features - Quick guide Page 3 - Features - General - Working conditions -
More informationTruck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories
Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories Pumps and Motors Conversion factors 1 kg... 2,20 lb 1 N... 0,225 lbf 1 Nm... 0,738 lbf ft 1 bar...14,5 psi
More informationVARIABLE DISPLACEMENT AXIAL PISTON PUMPS. For truck applications
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS For truck applications TVP FEATURES Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications. The compact
More informationFluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.
Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power
More information2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
More informationControl block EDD Modular Directional Valve
Control block EDD Modular Directional Valve 2 Control block EDD Modular Directional Valve Bosch Rexroth Oil Control S.p.A. introduces this innovatory Directional Control Valve size 8 which allows to create
More informationRickmeier Solutions. Gear pumps for superior Lubrication
Rickmeier Solutions Gear pumps for superior Lubrication P U M P E N T E C H N O L O G I E #1. Introduction Position and significance of Rickmeier products Rickmeier supplies pumps, valves and systems for
More informationVariable Displacement Pump AA10VSO
Variable Displacement Pump AA10VSO Series 31, Industrial Model, for Open Circuits Axial piston, swashplate design Brueninghaus Hydromatik Sizes 28...140 Nominal pressure 4000 psi Peak pressure 5100 psi
More informationHydraulic Control Solutions
Hydraulic Control Solutions Vexve s Hydrox hydraulic control solutions are suitable for even the most challenging installation sites and conditions. Specifically designed for district heating and district
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationHydraulic Pump/Motor Division Hydraulic Pump/Motor Division
Parker Piston Pumps Otsego Core Competency... Piston Pumps PAVC Series : 4 displacements from 33-100 cc/r, 207 Bar, 3000 RPM PVP Series : 9 displacements from 16-140 cc/r, 250 Bar, 3000 RPM PV Plus : 12
More informationSeries TMM Axial Piston Motor. Technical Information
Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationFixed displacement vane pumps
Fixed displacement vane pumps RE 1335/1.5 Replaces: 11.2 1/22 Types PVV and PVQ Nominal sizes 18 to 193 Series 1X Maximum operating pressure 21 bar Maximum displacement 18 to 193 cm 3 Doppelpumpe_d_ Double
More informationRexroth Hydraulic Pump A10VO Series User Manual
Rexroth Hydraulic Pump A10VO Series User Manual Rexroth Hydraulic pump A10VO Series User Manual Revised 5/1/2009 Page 1 of 12 Functional Purpose This pump is preferred over a fixed displacement (gear)
More informationTruck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories. parker.com/pmde
Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories parker.com/pmde Pumps and Motors Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft
More informationHigh Pressure Gear Motors KM 1
High Pressure Gear Motors KM 1 2 KRACHT GmbH Gewerbestr. 2 58791 Werdohl, Germany fon +49()23 92/935- fax +49()23 92/935 29 mail info@kracht.eu web www.kracht.eu Construction 1 5 8 9 1 2 6 4 7 3 1 Housing
More informationZF W325 Vertical offset, direct mount marine transmission.
Marine Propulsion Systems Vertical offset, direct mount marine transmission. Maximum Input** Duty kw hp RPM Medium 507 680 2600 Continuous 430 577 2600 ** Must not be exceeded Description Robust design
More informationChapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
More informationUSA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI 53072 U.S.A. Tel: 262-691-2222 FAX: 262-691-0312 E-mail: sales@dynexhydraulics.
SPECIFICATIONS PF1000 Series Fixed Displacement Pumps Also refer to "Checkball Pump Installation and Operating Recommendations" Bulletin PSI.CB (dynexpumpinstallation.pdf) CONTACT INFORMATION USA Headquarters
More informationHydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde
Hydraulic Motor/Pump Series F11/F12 Fixed Displacement parker.com/pmde Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5
More informationE4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51
83 300/100 ED E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP P05 p max 250 bar Q max (see specification table) MOUNTING INTERFACE OPERATING PRINCIPLE
More informationSeries PVP Variable Volume Piston Pumps
Series PVP Variable Volume Piston Pumps Catalog HY28-2662-CD/US Revised June, 212 hpm12-1.p65, lw, jk 1 Notes Series PVP hpm12-1.p65, lw, jk 2 Introduction Series PVP Series Sizes 6-14 Phased Out For Reference
More informationZF W320 Vertical offset, direct mount marine transmission.
Marine Propulsion Systems Vertical offset, direct mount marine transmission. Maximum Input** Duty kw hp RPM Medium 425 570 2400 Continuous 357 479 2400 ** Must not be exceeded Description Robust design
More informationTruck Hydraulics. F1 F2 T1 VP1 PTO info Accessories. Fixed and Variable Displacement Pumps, Motors and Accessories. Catalogue HY17-8200/UK March 2004
Fixed and Variable Displacement Pumps, Motors and Accessories Catalogue HY17-8200/UK March 2004 F1 F2 T1 VP1 PTO info Accessories Conversion factors 1 kg 2.20 lb 1 N 0.225 lbf 1 Nm 0.738 lbf ft 1 bar 14.5
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 4 DIRECTIONAL CONTROL VALVES The material needed for outcome 2 is very extensive
More information15/40/80CN Series Medium Pressure Filters
1/4/8CN Series Medium Pressure Filters Max 32 l/min - 7 bar Global Filtration Technology 1/4/8CN Series TYPICAL APPLICATIONS Compressor Lube Oil Off-line Filter Loops Machine Tools (Automotive Standard)
More informationMONO BLOCK DIRECTIONAL CONTROL VALVE TS1120TSLB
MONO BLOCK DIRECTIONAL CONTROL VALVE TS112TSLB TS TS212TSTSJB P T TS312TSDTSTKJ TS112TSJB FEATURES: O RG PORTS to eliminate leakage. POWER BEYOND CAPABILITY to fit your multi valve circuits. BUILT ANTI-DROP
More informationHydraulic Flow Control Valves
Webtec Products Limited Hydraulic Flow Control Valves Quality Hydraulic Components from the Webtec Range CONTENTS DESCRIPTION PAGE No. ILFC Series Fixed Flow Pressure Compensated Control Valve 1 VFC Series
More informationFlow Control Valves. Note: Also see R04C3 on page DC1. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US
Catalog HY15-352/US Contents Control SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI NEED VALVES J2A2... C8-2... Needle Valve, Cartridge Type...45/12... 42/6... 5-6 NVH81... C8-2... Needle
More informationDual Path Mobile Pump
Dual Path Mobile Pump Technical Manual 350 Series 350 Series Mobile Pump Introduction Single Assembly* Dual Path Assembly The 350 Series mobile pump is an advanced, closed circuit, servo controlled, axial
More informationValve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
More information*Rated to 207 Bar/3000 PSI with Aluminum Body. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type...
More informationExtremely compact in size to allow direct flange-mounting on vehicle engine or gearbox PTOs.
TXV - Presentation pumps with Load Sensing control variable displacement piston pumps ADVANTAGES pumps are variable displacement with pressure-flow control called Load Sensing. They self-regulate to give
More informationPART 2 FORKLIFT HYDRAULIC SYSTEM
PART 2 FORKLIFT HYDRAULIC SYSTEM Chapter 1 Description and Operation Component Locations & Circuit Layouts 1 Hydraulic Pump 11 Control Valve 14 Valve Section Oil Flows 15 Anti-Cavitation Valve 22 Velocity
More informationPVM Piston Pumps Service Manual
PVM Piston Pumps Service Manual PVM018/020 PVM045/050 PVM057/063 PVM074/081 PVM098/106 PVM131/141 Table of Contents Service Parts Pump Description... 3 Basic pump Pump Operation Controls Types Part Identification...
More informationChar-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997
Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47
More informationInternal gear pump PGF Series 2X and 3X
Internal gear pump GF eries 2X and 3X RE 23 Edition: 4.24 Replaces: 5.2 Fixed displacement Frame sizes, 2 and 3 izes.7 to 4 Maximum pressure 25 bar Displacement.7 to 4 cm 3 H758 Features ow operating noise
More informationSafety for Hydraulics Leak free double check valve, pilot operated, series DERV Cartridge type, two stage
Safety for Hydraulics Leak free double check valve, pilot operated, series Cartridge type, two stage 8 1 1 General description spring closed, pilot operated, cartridge type poppet valve it holds the load
More informationCatalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI KSWA3... SW-3... Ball sert Type...9./2.... 42/6... 3 K2A... 3Z... Poppet sert Type...38/1... 3/... 4 CS41B... C4-3...
More information7.1. Part Lists. Hardware Insertion Machine. Instructions. Instructions
Instructions Instructions The Parts in this section of the manual are listed by Item Number, Part Number, Description and Quantity. The Item Numbers are in a circle with an arrow pointing to the specific
More informationHYDRAULIC MOTORS HYDRAULIC SYSTEMS DIVISION. Outstanding Hydraulic Products, Service and Expertise, Worldwide
HYDRAULIC MOTORS HYDRAULIC SYSTEMS DIVISION Outstanding Hydraulic Products, Service and Expertise, Worldwide Introduction to Haldex Hydraulic Motor Capability Haldex offers one of the widest selections
More informationPressure Relief. Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 VICKERS. Basic Characteristics. Sectional Illustrations
VICKERS Pressure Relief Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 Sectional Illustrations RCG-** Model Shown RCT-** Model Shown Basic Characteristics Type...................
More informationFluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
More informationRPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007
Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid
More information2011 DC Electropumps Bull. Rotation Ø 15 6,45 3,5 5,7
Ø 5 ±. DC Electropumps Bull,5 Rotation,5 5,7 Email: sales@hydronit.com Fax B... Electro pumps Bull series MODEL CODE EPB,5 DC /S5 K, V** Electro Pump Bull series Gear pump displacement (cc/rev (see tables
More informationPVH131/141 Variable Displacement Piston Pump - 11 Design
Service Data Vickers Piston Pumps PVH131/141 Variable Displacement Piston Pump - 11 Design Revised 05/01/97 M-2209-S Maximum Adjustable Stop S Option 913341 Locknut Torque 25-50 N.m. (18-37 lb. ft.) Torque
More informationElectrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv)
Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Order code Series and function M-05-310-HN-442 Standard coil HN at ports 2 + 4 HN at ports
More informationConstruction of the Gear Pump KF
Transfer Gear Pumps Construction of the Gear Pump KF Plain Bearing Bush Driving Gear Flange Mounting Cover Outboard Bearing End Cover Drive Shaft End Shaft End Seal Housing Driven Shaft Pinion Product
More information3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
1/6 RE 18309-3/06.10 Replaces: RE 18309-3/04.10 3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z Description The flow control
More informationPUMP AND MOTOR DIVISION
INSTALLATION MANUAL SERIES P2 and P3 MOBILE PISTON PUMP 1 Check model code / compare with your paper work Nameplate of the pump Ordering / Sales Acknowledgement 2 Check rotation of the pump Clockwise rotation
More informationZOP, ZOT SIGMA PUMPY HRANICE GEAR PUMPS 426 1.99 21.04
SIGMA UMY HRANICE GEAR UMS SIGMA UMY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: sigmahra@sigmahra.cz, 426 1.99 21.04 Application In
More information2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow
2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow RE 18309-64/04.10 1/6 Replaces: RE 00171/02.07 A-VRFC2C-VEI-VS-LS 0M.28.03.80 - Y - Z Description
More informationCheck Valves Valve locator
Check Valves Valve locator Functional Symbol Flow Typical Model Cavity Rating Pressure Page Check valve, direct L/min (USgpm) bar (psi) FPR/4 Inline () 5 (5) - FPR/8 Inline (8) 5 (5) - FPR/ Inline 45 ()
More informationRPT SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS 426 2.98 23.01
SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS RPT SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +4 581 661 111, fax: +4 581 602 587 Email: sigmahra@sigmahra.cz 426
More informationThe SF2 series are designed for reservoir side-wall mounting applications, suitable for flow rates to 850 l/min and filtration from 25 to 250 micron.
D e s c r i p t i o n 500 The SF2 series are designed for reservoir side-wall mounting applications, suitable for flow rates to 850 l/min and filtration from 25 to 250 micron. A major feature of these
More informationTable of Contents. Overview 1. Pump Disassembly 2. Control Disassembly / Reassembly 7. Pump Reassembly 13. Adjustment Procedures DR Control 19
Table of Contents Overview 1 Pump Disassembly 2 Control Disassembly / Reassembly 7 Pump Reassembly 13 Adjustment Procedures DR Control 19 Adjustment Procedures DRG Control 20 Adjustment Procedures DFR
More informationVickers. Check Valves. Check Valves. Inline, right angle, manifold mounted, and pilot operated designs. Released 9/93
Vickers Check Valves Check Valves Inline, right angle, manifold mounted, and pilot operated designs Released 9/93 645 Introduction Vickers inline, right-angle, and manifold mounted check valves are direct
More informationPM10 VARIABLE DISPLACEMENT PUMP CLOSED LOOP CIRCUIT
PM10 VRIBLE DISPLCEMENT PUMP CLOSED LOOP CIRCUIT T E C H N I C L C T L O G PM10 - Variable displacement pump POCLIN HYDRULICS OVERVIEW PM10 is a variable displacement, axial piston pump, with swashplate
More informationGoTo Europe Focused Delivery Program. Product Overview Hydraulics
GoTo Europe Focused Delivery Program Product Overview Hydraulics 2 GoTo Europe The products I need when I need them In today s global competition every day counts. Fast response times have become an important
More informationOildyne. 165 Series Hydraulic Power Units. Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm)
Oildyne Hydraulic Power Units Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm) 11 Power Unit Features We are pleased to introduce our new power units. The power units let you put more power where
More informationSeries 30000 Hose Reels
Operating Instructions and Parts List for Series 30000 Hose Reels - MANUAL DRIVEN - - POWER DRIVEN - SAFETY PRECAUTIONS Personal injury and/or equipment damage may result if proper safety precautions are
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 3 HYDRAULIC AND PNEUMATIC MOTORS The material needed for outcome 2 is very extensive
More informationStandard Bills of Materials Commonly Ordered Models Only
Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter
More informationMANTA Piston Distributor for Oil and Fluid Grease
MANTA Piston Distributor for Oil and Fluid Grease Function Piston distributors meter out and distribute the oil delivered by an intermittently actuated pump. The quantities of oil for the individual lube
More informationSteering unit. Table of contents. Features RE 11872/05.06. Type LAGL. Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min
Steering unit RE 11872/05.06 /10 Type LAGL Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min H7375 Table of contents Contents Page Features 1 Ordering code 2 Function, section 3 Device
More informationMONO BLOCK DIRECTIONAL CONTROL VALVE TS
SHIPPING: 2332 S 25TH STREET (ZIP 6815) MAILING: P.O. BOX #669 OMAHA, NE 6816 PHONE: (42) 344-4434 FAX: (42) 341-5419 HTTP://WWW.BRAND-HYD.COM MONO BLOCK DIRECTIONAL CONTROL VALVE TS TS312TSDTSTKJB TS2
More information-10 +45 C 50 μm filtered air, with or without lubrication spool 10 bar G/18 G1/4 6,5 8,5 890
CL/CM UNIVERSAL Valves G1/8 - CHARACTERISTICS -10 +45 C 50 μm filtered air, with or without lubrication spool 10 bar G/18 6,5 8,5 890 1480 die-cast zamak (G1/8), aluminium () NBR aluminium AA series/u1-u,5
More informationPneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Application Tight-closing, double eccentric butterfly valve for process engineering and plants with industrial
More informationMobile Hydraulic Pumps T6*M. Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6*M Denison Vane Technology, fixed displacement Contents GENERAL Series T6 Mobile, Denison Vane Pumps Features...3 Instructions...3 Minimum & maximum speeds...4 Pressure ratings...4
More informationSpare Parts List M96A.24SM/B M96A.28SM/B
*16202390* 162.0239.0 REV5 14/04 2015 Spare Parts List M96A.24SM/B M96A.28SM/B Issue Table description Issue n. of pages Overall view 09/2008 1 C.h. return group and d.h.w. heat exchanger 09/2008 1 C.h.
More informationRadial piston pumps type R and RG
Radial piston pumps type R and RG Operating pressure p max = 700 bar Delivery flow Q max = 91.2 lpm (at 1450 rpm) Geometric displacement V g max = 64.2 cm 3 /rev. 1. General Motor pumps and hydraulic power
More informationAxial Piston Variable Motor A6VM
Electric Drives and Controls Hydraulics Linear otion and ssembly Technologies Pneumatics Service xial Piston Variable otor 6V RE 91 604/05.06 1/76 Replaces: 06.03 Technical data sheet Series 6 Sizes Nominal
More informationLoad-sensing control block in mono and sandwich plate design
Load-sensing control block in mono and sandwich plate design RE 64276/08.2010 Replaces: 08.2008 1/64 Type M4-12 Nominal size 12 Unit series 2X Nominal pressure 350 bar (pump side) Nominal pressure 420
More informationPVQ 40-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 PVQ 45-B2/M2 * *** - ** * * - 10 C**
Service Data Vickers Piston Pumps Low Noise Industrial Piston Pump PVQ 40-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 PVQ 45-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 C, CM Compensator
More informationMax. Head (m) LVR3-7-220V 3 32 5 44 0,55 10 50Hz ~ 220 V Oval Flange G1. LVR3-7-380V 3 32 5 44 0,55 10 50Hz ~ 380 V Oval Flange G1
Description NordicFlow s keep the system pressurized during normal conditions and prevent unnecessary activation of the main pump. They have compact design, high efficiency, low noise, reliable sealing
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationRotary Actuators, NAMUR interface VDI/VDE 3845 & ISO 5211 (ATEX certified) Series ARP
NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8. Rotary Actuators and Grippers Rotary Actuators, NAMUR interface VDI/VDE 384 & ISO 211 (ATEX certified) Series ARP Model: Rack & Pinion - Rotational
More informationFP12 FERRA SERIES HEAVY DUTY GEAR PUMP
FP12 FERR SERIES HEVY DUTY GER PUMP Concentric B Innovation in Hydraulics DESIGNED FOR HEVY DUTY The FERR F12 pump is a rugged two-piece pump available with displacements from 16 to 41 cc/rev and pressures
More informationWaste Oil Handling, Spill Containment & Lighting
58 Waste Oil Handling, Spill Containment & Lighting 372000 SAMOA Mobile Waste Oil Drainer & Extractor Drains and/or extracts waste oil from cars and light commercial vehicles Drain bowl capacity of 20
More informationHYDRAULIC MOTORS Concentric AB
HYDRAULIC MOTORS Concentric A Innovation in Hydraulics Introduction to Concentric Hydraulic Motor Capability Concentric offers one of the widest selections of gear pumps and hydraulic motors in the industry.
More informationOUT. The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter
D e s c r i p t i o n 250 The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter within the filter preventing oil loss from
More informationHYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS Hydraulic components POCLAIN HYDRAULICS Methodology : This document is intended for manufacturers of machines that incorporate Poclain Hydraulics products.
More information*Rated to 207 Bar/3000 PSI with Aluminum Body. Catalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type... 5/132...
More informationTitan Makina Ltd. Şti. 1160. Sok. No: 9 Ostim 06370 Ankara Tel: + 90 312 354 9977 Fax: + 90 312 385 5611 Web: www.titanltd.com.
IS26 Concrete Spraying Machine IS26 Concrete Spraying Machine TECHNICAL SPECIFICATIONS Manipulator Max. vertical spraying reach : Max. horizontal spraying reach : Working lights : Spraying Head Rotation
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
More informationH1 Axial Piston Pump, Size 078, Single Technical Information Dimensions
Input Shafts Option G1, ISO 3019-1, outer dia 32 mm-4 (SAE C, 14 teeth) 31.5 ±1 [1.240 ±0.039] MOUNTING FLANGE SURFACE FLANGE 127-4 PER ISO 3019-1 SPLINE DATA NUMBER OF TEETH : 14 PITCH FRACTION : 12/24
More informationVickers. Piston Pumps
Vickers Piston Pumps xial Piston Pumps Fixed and Variable Displacement PF, PF, PF PV /6, PV /, PV /9, PV and PV 9 to SE PV /6, PV /, PV /9 to DIN/ISO 39, Part G-379 Contents asic characteristicts..........................................................................................3
More informationSAFETY BLOCK type BS 9.3 E 01-12
SAFETY BLOCK type BS 9.3 E 01-12 9.3.1 TECHNICAL DATA MAX OPERATING PRESSURE (PS): 420 bar PRESSURE TEST (PT): 1.43 x PS NOMINAL PASSAGE DIAMETER: 10mm, 20mm, 25mm, 32mm WORKING TEMPERATURE: -40 +150 FLUID
More informationA10VSO Nominal size 18 see RD 92712 A10VSO Nominal size 28...140 see RD 92711
A10VO Nominal size 18 see RD 92712 A10VO Nominal size 28...140 see RD 92711 The variable displacement axial piston pump A10VO in swashplate design was designed for hydrostatic drives in open circuits.
More informationFlow divider (flow distributor), type TQ
Flow divider (flow distributor), type TQ Pressure p max = 0 bar Flow Q CN max = 00 lpm Share ratio = :. General Task Flow dividers type TQ are self-regulating valves, which largely irrespective of the
More informationZF 301 A. Marine Propulsion Systems
Marine Propulsion Systems 10 Down angle, direct mount marine transmission. Description Robust design also withstands continuous duty in workboat applications. Fully works tested, reliable and simple to
More information3/2-way Mini Solenoid Valve
3/2way Mini Solenoid Valve Directacting 0... bar DN mm... DN mm,,, subbase, banjobolt connection 21mm coil spacing when mounted on manifold Type can be combined with... Type 20 Type 207 Type able plug
More informationIF IT FLOWS THE BOWIE PUMP CAN PUMP IT
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series
More informationSINGLE LINE CRENTRALIZED LUBRICATION SYSTEM
SINGLE LINE CRENTRALIZED LUBRICATION SYSTEM Volumetric SYSTEM 1 Ph +39 0331 601697 Fax +39 0331 365149 - www.ilclube.com - info@ilclube.it VOLUMETRIC SYSTEM INDEX INTRODUCTION 4-5 MANUAL PUMPS PRD-13 6-7
More informationLOADER DIRECTIONAL CONTROL VALVE LV LV22RFSTKLB SHOWN T
LOADER DIRECTIONAL CONTROL VALVE LV LV22RFSTKLB SHOWN T LV22RFSTKLB A2 B2 A1 B1 P LV22RFSTKABW FEATURES: O RING PORTS to eliminate leakage. FOURTH POSITION REGEN allows cylinder to rapidly extend. POWER
More informationW900 SERIES HYDRAULIC PUMP
W900 SERIES HYDRAULIC PUMP HYDRAULIC SYSTEMS DIVISION Outstanding Hydraulic Products, Service and Expertise, Worldwide W900 Hydraulic Gear Pump. PRESSURE (P1) 276 BAR (4000 PSI) (P2) 300 BAR (4400 PSI).
More information