HITACHI POWER TOOLS ACCESSORIES CATALOG
|
|
- Cornelia Armstrong
- 7 years ago
- Views:
Transcription
1 HITACHI POWER TOOLS ACCESSORIES CATALOG
2 INDEX Metal Drill Bit - Round shank P.4, 5, 6, 7 and 8 Metal Drill Bit Set - Round shank P.9 and 10 for Drill and Driver Drill (1pc/2pcs/5pcs/10pcs) for Drill and Driver Drill Metal Drill Bit Set mm Hex shank P.10 Cutting Wheel - For Metal P.11 for Impact Driver and Drill for Disc Grinder Cutting Wheel - For Stainless / Inox P.11 Grinding Wheel - For Metal and Stainless / Inox P.12 for Disc Grinder for Disc Grinder Bit Set P.13 Masonry Drill Bit and Set P.14 and 15 for Impact Driver and Driver Drill Plus Bit Type for Rotary Hammer Masonry Drill Bit and Set P.16 and 17 Bull Point P.18 Max Bit Type for Rotary Hammer Round Bit Type for Impact Drill Plus Bit Type Max Bit Type Hex Bit Type for Rotary Hammer and Hammer Cold Chisel P.19 Scoop & Clay P.20 Plus Bit Type Max Bit Type Hex Bit Type for Rotary Hammer and Hammer Hex 30mm shank for Hammer 2
3 Diamond Wheel P.20 Wood Drill Bit and Set P.21 for Cutter and Disc Grinder for Drill and Driver Drill Wood Auger Bit P.21 Wood Spade Bit and Set P.22 for Drill and Driver Drill for Drill and Driver Drill Mixed Drill Bit Set (9pcs.) P.22 Circular Saw Blade P.23 and 24 for Drill and Driver Drill for Circular Saw Miter Saw Blade - For Wood & Aluminum P.25 and 26 Planer Blade P.26 for Miter Saw for Planer Keyed Drill Chuck P.27 Drill Chuck and SDS-Plus Adaptor Set P.27 for Drill for Plus Bit Type Rotary Hammer Saw Chain and Bar P.28 Accessory Bag P.29 for Chain Saw 3
4 Metal Drill Bit - HSS Working Metal Drill Bit ( mm) Working l Suitable for drilling into ferrous and non-ferrous metals. l HSS M2 bit offering faster drilling speeds and extended working life. l Wide range of diameter from 1.0mm to 13mm and of overal length from 34mm to 151mm
5 Metal Drill Bit - HSS Working Metal Drill Bit ( mm) Working l Suitable for drilling into ferrous and non-ferrous metals. l HSS M2 bit offering faster drilling speeds and extended working life. l Wide range of diameter from 1.0mm to 13mm and of overall length from 34mm to 151mm
6 Metal Drill Bit - HSS Working Metal Drill Bit ( mm) Working Metal Drill Bit ( Q ty 10pcs, mm) Working l Suitable for drilling into ferrous and non-ferrous metals. l HSS M2 bit offering faster drilling speeds and extended working life. l Wide range of diameter from 1.0mm to 13mm and of overall length from 34mm to 151mm
7 Metal Drill Bit - HSS Working Metal Drill Bit ( Q ty 10pcs., mm) Working l Suitable for drilling into ferrous and non-ferrous metals. l HSS M2 bit offering faster drilling speeds and extended working life. l Wide range of diameter from 1.0mm to 13mm and of overall length from 34mm to 151mm
8 Metal Drill Bit - HSS Working Metal Drill Bit ( Q ty 10pcs. and 5pcs., mm) Working l Suitable for drilling into ferrous and non-ferrous metals. l HSS M2 bit offering faster drilling speeds and extended working life. l Wide range of diameter from 1.0mm to 13mm and of overall length from 34mm to 151mm
9 Metal Drill Bit Set - HSS Working Metal Drill Bit Set (13pcs. and 19pcs.) Working Working
10 Metal Drill Bit Set - HSS Working Metal Drill Bit Set (25pcs.) Working Working Metal Drill Bit Set (5pcs. and 9pcs.) mm Hex shank Working * * Working * * l 6.35mm Hex shank drive suits impact drivers for drilling thin metal, wood and plastic applications. l 6.35mm Hex shank fits most 6.35mm quick change sockets. l Heat-hardened HSS drill bit lasts longer. l Drill portion and shank portions are made solid, not separated, to allow accurate and heavy drilling applications. * : Contact HKK for details. 10
11 Cutting Wheel - For Metal Working / Thickness Specification Q ty Cutting Wheel - For Metal 100 / A46R l For cutting mild steel sheet, pipe, channel, solid bar, thin stainless steel, etc. l 1mm thickness for speed cutting and less material loss. l Fine cutting with less burnt mark and burr. l Double glass fiber reinforcement. Shape Type 41 Thickness 355 / A30R BF / A30R BF l For cutting, mild steel sheet, pipe, channel, solid bar, etc. l Aggressive fast cutting with less burnt mark and burr. l Double glass fiber reinforcement. Shape Type 41 Thickness 100 / A30R BF / A30R BF / A30R BF / A30R BF / A30R BF l For cutting, mild steel sheet, pipe, channel, solid bar, etc. l Aggressive fast cutting with less burnt mark and burr. l Double glass fiber reinforcement. Shape Type 42 Thickness Cutting Wheel - For Stainless / Inox 100 / WA60Q BF / WA60Q BF l For cutting thin stainless steel, mild steel sheet, pipe, channel, solid bar, etc. l 1mm thickness for speed cutting and less material loss. l Fine cutting with less burnt mark and burr. l Double glass fiber reinforcement. Shape Type 41 Thickness 11
12 Cutting Wheel - For Metal Working / Thickness Specification Q ty Cutting Wheel - For Stainless / Inox 100 / WA30R BF / WA30R BF / WA30R BF / WA30R BF / WA30R BF Shape Type 42 Thickness l For cutting thin stainless steel, mild steel sheet, pipe, channel, solid bar, etc. l Aggressive fast cutting with less burnt mark and burr. l Double glass fiber reinforcement. Grinding Wheel - For Metal Working / Thickness Specification Q ty Grinding Wheel - For Metal 100 / A24S BF / A24R BF / A24R BF / A24S BF / A24S BF Shape Type 27 Thickness l New series of grinding wheels with standard 6mm thickness for efficient and longer life grindings for grinding metal. l Reinforcement to hold the wheel together under the heavy load. l Steel flange to allow the wheel to be firmly clamped to the power tools. Grinding Wheel - For Stainless / Inox 100 / WA24S BF / WA24R BF / WA24S BF / WA24S BF / WA24S BF Shape Type 27 Thickness l New series of grinding wheels with standard 6mm thickness for efficient and longer life grindings for grinding, stainless and metal. l Reinforcement to hold the wheel together under the heavy load. l Steel flange to allow the wheel to be firmly clamped to the power tools. 12
13 Bit Set Description Bit Set (10pcs.) uassorted popular driver and drill bits for various driving / drilling applications. u4pcs., Drill-Bits, HSS material Quick-Change-Hex-Shank D=2,3,4,5mm u6pcs., Double-Ended Driver Bits, S2 material PH2, L=100mm, 2pcs. PH2, L=75mm, 2pcs. PH1, L=75mm, 1pc. PH2+Slotted, L=65mm, 1pc Description Bit Set (100pcs.) ufor professional use uph2, L=25mm, 100pcs. 25mm 100 * * * : Contact HKK for details. 13
14 Masonry Drill Bit (Plus Bit Type) - TCT Two Cutter Working Masonry Drill Bit (Plus Bit Type) Working l Plus Bit Type shank. l Faster drilling into concrete, solid bricks and natural stones with Tungsten Carbid Tip. l Greater cost performance. l Hitachi logo and bit dia. indicated on the bit body
15 Masonry Drill Bit Set (5pcs.) (Plus Bit Type) - TCT Two Blade Type Working Masonry Drill Bit Set (5pcs.) (Plus Bit Type) (A) (B) (C) Working (D) l Convenient assorted Drill Bit sized from D5mm to 14mm. l Four types assortments are available for your choice. l Professional quality for efficient and faster hammer drilling in hard concrete, granite, brick and other similar building materials. 15
16 Masonry Drill Bit (Max Bit Type) - TCT Two Cutter Working Masonry Drill Bit (Max Bit Type) Working l Max Bit Type shank. l Faster drilling into concrete, solid bricks and natural stones with Tungsten Carbid Tip. l Greater cost performance. l Hitachi logo and bit dia. indicated on the bit body
17 Masonry Drill Bit (Round Bit Type) - TCT Two Cutter Working Masonry Drill Bit (Round Bit Type) Working l Round Bit Type shank. l Multi functions masonrydrillbits for use with percussion dills on brick, stone or light concrete. l Tungsten carbide tips for faster drilling speed and a long lifetime Masonry Drill Bit Set (5pcs. and 8pcs.) (Round Bit Type) Working 5pcs pcs Working * * * : Contact HKK for details. l Assorted masonry drill bit set for use with impact dills on brick, stone or light concrete. l 5pcs set with standard quality bit. l 8pcs set with high quality carbide tips for faster drilling speed and longer life time. 17
18 Bull Point - Bull Point (Plus Bit Type) Plus Bit Type l Bull point of great cost performance. l Hitachi logo indicated on the bit. Bull Point (Max Bit Type) Max Bit Type Max Bit Type Max Bit Type l Bull point of great cost performance. l Hitachi logo indicated on the bit. Bull Point (Hex Bit Type) Hex Hex Hex Hex Hex Hex Hex l Bull point of great cost performance. l Hitachi logo indicated on the bit. 18
19 Cold Chisel Chisel Width Cold Chisel (Plus Bit Type) Width Plus Bit Type Plus Bit Type l Cold Chisel of great cost performance. l Hitachi logo indicated on the bit. Cold Chisel (Max Bit Type) Max Bit Type Max Bit Type l Cold Chisel of great cost performance. l Hitachi logo indicated on the bit. Width Cold Chisel (Hex Bit Type) Width Hex Hex Hex Hex Hex Hex Hex Hex Hex l Cold Chisel of great cost performance. l Hitachi logo indicated on the bit. 19
20 Scoop & Clay - Hex 30mm shank Shank Width Q ty Scoop - Hex 30mm shank Hex * * * : Contact HKK for details. l Convenient for digging ground and shoveling, removing old asphalt sidewalk, etc. l Made from forged high grade steel with heat treated work area for extended life. l Can be used with Hex. 30mm mount hammers from Hitachi. Width Clay - Hex 30mm shank Hex * * * : Contact HKK for details. l Convenient for digging ground and shoveling, removing old asphalt sidewalk, etc. l Made from forged high grade steel with heat treated work area for extended life. l Can be used with Hex. 30mm mount hammers from Hitachi. Width Diamond Wheel - For Masonry Use Thickness Diamond Wheel (Segment Type) l For Cutter. l For masonry use in a wide variety of materials: concrete, marble, granite.clay brick, sandstone(medium), etc l For Cutter and Disc Grinder. l Dry Cutting. l Suitable for cutting wide range of abrasive and medium-hard materials such as concrete, bricks and soft slate. These also can be used for intermediate shallow cutting of hard materials such as granite and hard slate. l Greater cost/cutting performance with segmented rim of ;8 segmented 8mm high rim. l Glazed blade can be sharpened with soft bricks. l 20mm/16mm(with the standard adapter ring.) l For Cutter. l For masonry use in a wide variety of materials: concrete, marble, granite.clay brick, sandstone(medium), etc l For Disc Grinder. l Dry Cutting. l Suitable for cutting wide range of abrasive and medium-hard materials such as concrete, bricks and soft slate. These also can be used for intermediate shallow cutting of hard materials such as granite and hard slate. l Greater cost/cutting performance with segmented rim of ; 9 segmented 8.5mm high rim. l Glazed blade can be sharpened with soft bricks. 20
21 Wood Drill Bit and Set Working Wood Drill Bit and Set Working l Excellent drilling into hard and soft wood. l Offering faster drilling speeds and extended working life with polished steel body and centering point Wood Auger Bit Working Wood Auger Bit Working l Excellent speed drilling into hard and soft wood with good finish
22 Wood Spade Bit and Set - Wood Spade Bit and Set l Suitable for drilling into hard and soft wood. l Offering faster drilling speeds and extended working life with polished steel body and centering point. l Hex shank prevents slipping in the chuck Mixed Drill Bit Set (9pcs.) Description Mixed Drill Bit Set (9pcs.) Metal Drill Bit D5 D6 D HSS Fully Ground 118 Masonry Drill Bit D5 D6 D Tungsten Carbide Tip Wood Drill Bit D5 D6 D HSS Brad Point 22
23 Circular Saw Blade - For Wood Working / Thickness Teeth Circular Saw Blade 185 / l For Circular Saw only. l For ripping and cross cutting of softwoods and hardwoods with speed. Also, suitable for single or multiple chipboard panels. l In color box. 185 / l For Circular Saw only. l For fine ripping and cross cutting of softwoods and hardwoods. Also, suitable for single or multiple chipboard panels. l In color box. 185 / / / / l For Circular Saw only. l Thin-karf 2.2mm for clean and faster cutting of wood. l High grade tungsten carbide for low wear rate for extended blade life. l Fully heat-hardened and tensioned blade absorbing impact and tough load. l In clamshell. 23
24 Circular Saw Blade - For Wood Working / Thickness Teeth Circular Saw Blade 185 / * * 235 / * * l For Circular Saw only. l For ripping and cross cutting of softwoods and hardwoods with speed. Also, suitable for single or multiple chipboard panels. l In clamshell. * : Contact HKK for details. 185 / * * 185 / * * 235 / * * 235 / * * l For Circular Saw only. * : Contact HKK for details. l Thin-karf 1.8mm - 2.2mm for faster cutting of softwoods and hardwoods. l In clamshell.(1pc.) l In color display box.(bulk(10pcs.)) 24
25 Miter Saw Blade - For Wood Working / Thickness Teeth Miter Saw Blade - For Wood 235 / / l For Miter Saw only. l High grade tungsten carbide for low wear rate for extended blade life. l Fully heat-hardened and tensioned blade absorbing impact and tough load. l In clamshell. 255 / l For Miter Saw only. l For fine ripping and cross cutting of softwoods and hardwoods. Also, suitable for single or multiple chipboard panels. l In color box. 305 / l For Miter Saw only. l For fine ripping and cross cutting of softwoods and hardwoods. Also, suitable for single or multiple chipboard panels. l In color box. 305 / * * 305 / * * * : Contact HKK for details. l For Miter Saw only. l High grade tungsten carbide for low wear rate for extended blade life. l Fully heat-hardened and tensioned blade absorbing impact and tough load. l In clamshell. 25
26 Miter Saw Blade - For Aluminum / Thickness Teeth Miter Saw Blade - For Aluminum 255 / l For Miter Saw only. l High grade tungsten carbide for low wear rate for extended blade life. l Fully heat-hardened and tensioned blade absorbing impact and tough load. l In clamshell. Planer Blade - For Wood Working Width Description Planer Blade 82 HSS resharpenable planer blades : 2pcs For P20SF only (A) 82 TCT reversible blades : 2pcs For P20SF only. 2 * * (B) 82 TCT reversible blades : 2pcs Adaptor plates : 2pcs For P20SF only. 2 set * * (C) * : Contact HKK for details. l (A) : HSS resharpenable blade for longer blade life. l (B) : Double edged reversible TCT blades for twice the cutting life. l (C) : Conversion set from the resharpenable blade system to the reversible type blade system. (incl. 2 TCT Blades + 2 Adaptor plates) 26
27 Drill Chuck (keyed) Max Capacity Mount Description Keyed Drill Chuck - Rotary Mode Only D1.5 - D10 3/8-24UNF Chuck : 1pc. Key : 1pc mm D1.5 - D13 1/2"-20UNF Chuck : 1pc. Key : 1pc mm l High-precision thread closely connected to the power tools. l Accurate, reliable and durable. l Plated body provides a rust-resistant finish. l Through-hardened jaws provide wear-resistant gripping surfaces. l Shell, Keyhole, Keys after quenching tightly chuck drill bits. l Suggested to use in rotary mode only. Drill Chuck (keyed and keyless) and Adaptor Set Width Description Keyed and Keyless Drill Chuck & SDS-Plus Adaptor Set - Rotary Mode Only D1.5 - D13 1/2"-20UNF Chuck : 1pc. Key : 1pc. SDS-Plus Adaptor : 1pc. M6 Screw : 1pc mm Keyed D1.5 - D13 1/2"-20UNF Chuck : 1pc. SDS-Plus Adaptor : 1pc. M6 Screw : 1pc. 1 * * 13mm Keyless * : Contact HKK for details. 27
28 Saw Chain Guide bar length (inch) Chain pitch (inch) Drive link Chain gauge (inch) Saw Chain 10" 3/8" LP " 1 * * 12" 3/8" LP " 1 * * 14" 3/8" LP " 1 * * 16" 3/8" LP " 1 * * 13" 0.325"NK " 1 * * 15" 0.325"NK " 1 * * 16" 0.325"NK " 1 * * 18" 0.325"NK " 1 * * 20" 0.325"NK " 1 * * 10" 1/4" " 1 * * * : Contact HKK for details. Guide bar length Chain pitch Drive link Chain gauge l Advanced high quality saw chain maximizes the high value built into chain saws. l Cuts every type of timber. l Resharpenable. Saw Chain and Bar Combo Guide bar length (inch) Chain pitch (inch) Drive link Chain gauge (inch) Combo (Chain +Bar ) 12" 3/8" LP " 1 * * 14" 3/8" LP " 1 * * 16" 3/8" LP " 1 * * 13" 0.325"NK " 1 * * 15" 0.325"NK " 1 * * 16" 0.325"NK " 1 * * 18" 0.325"NK " 1 * * 20" 0.325"NK " 1 * * * : Contact HKK for details. Guide bar length Chain pitch Drive link Chain gauge l Chain and bar combo pack to maximize cutting performance of your chain saws. l Series of saw chain and bar combinations are available for your chain saws. 28
29 Accessory Bag Width Hight Accessory Bag l Extendable handle and wheels for easy mobility. l Large top opening for power tools, hand tools and accessories. l External pockets and internal separators for organized tool and accessory storage. l Padded carrying handle, side handle and removable shoulder strap for maximum versatility. Trolley Type l Large top opening for power tools, hand tools and accessories. l Padded carrying handle and removable shoulder strap for maximum versatility. l External pockets and internal separators for organized tool and accessory storage. Top opening Type l Wide top opening fastener for easy access to power tools, hand tools and accessories. l Padded carrying handle and removable shoulder strap for maximum versatility. l External pockets and internal separators for organized tool and accessory storage. Wide opening Type 29
30 Notes 30
31 Notes 31
32 32 Catalog No. SS-A 002 Printed in Japan 1309(M)
172 Holesaws Overview Bosch Accessories for Power Tools 09/10. 189 Diamond holesaw. with Power-Change adapter. 190 Diamond drill bits
Holesaw 172 Holesaws Overview Bosch Accessories for Power Tools 09/10 Overview 178 Progressor holesaw 189 Diamond holesaw 196 Hole cutters 183 Sheet Metal holesaw 190 Diamond drill bits 186 Multi Construction
More informationPlumbing. www.armeg.co.uk. The convenient, compact and clever solutions to your wrench and hand tool needs
INNOVATIVE DRILLING & TOOL SOLUTIONS www.armeg.co.uk Plumbing The convenient, compact and clever solutions to your wrench and hand tool needs Complete Heating Installation with PHI Wrench Set Easy Tap
More informationSDS PLUS 4 Claw (4 Cutting Edges) SDS-Plus
MASONRY DRILL BITS SDS-Plus Rotary Hammer with SDS chuck or SDS adapter 5/32"x6" to 1"x10" SDS-Plus Masonry Drill s are designed for use in a rotary hammer equipped with an SDS (slotted drive shaft) type
More informationWood Drilling.
Wood Drilling www.irwin.com A Century of Quality and Innovation In 1885, the IRWIN Auger Bit Company was formed. Over 125 years later, IRWIN is still the leading manufacturer of wood drilling bits and
More informationStep by Step instructions How to screw in wood and plastic
Step by Step instructions How to screw in wood and plastic Different screw heads As well as the simple slotted screw head, there are three different types of screw heads into which the screwdriver or bit
More informationLEADER IN CUTTING TECHNOLOGY
LEADER IN CUTTING TECHNOLOGY FOR OVER 2 YEARS REASONS WHY TRONEX IS THE BEST IN THE WORLD 1 2 SUPERIOR CUTTING PERFORMANCE Cut hundreds of thousands of times before dulling. Cut hundreds of thousands of
More informationHONING LATHE DUPLICATOR CUTTERS
Lay the flat face of the cutter or bit on the flat top surface of the hone with the rest of the cutter overhanging the edge. Rub the cutter or bit up and down the hone (Figure 24-44). Be sure to hold the
More informationAISI O1 Cold work tool steel
T OOL STEEL FACTS AISI O1 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their
More informationNew in the PFERD Product Line 204
COMBICLICK Fibre Discs COMBICLICK fibre discs Silicon carbide SiC D The silicon carbide SiC type is suitable for working on aluminium, copper, bronze, titanium, high-alloy steels and fibre reinforced plastics.
More informationTOOLS FOR SELF RELIANCE REFURBISHING SHEET No 2. Registered Charity No 280437. Saws for Woodworking
Registered Charity No 280437 Saws for Woodworking Issued December 2002 Registered Charity No 280437 page no 1 SAW TYPES Rip saw For cutting along the grain Crosscut saw [A smaller version is known as a
More informationChapter 6 Machining Center Carbide Insert Fundamentals
This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. All rights reserved. N10G20G99G40 N20G96S800M3 N30G50S4000 N40T0100M8 N50G00X3.35Z1.25T0101 N60G01X3.25F.002 N70G04X0.5
More informationBonded Abrasives. Precise cutting and grinding discs for many materials
Bonded Abrasives Precise cutting and grinding discs for many materials 1 sia Abrasives Your key to a perfect surface Many materials hide a secret. They keep their real beauty hidden. Only a professional
More informationTechCut 4 Precision Low Speed Saw
Product Brochure TechCut 4 Precision Low Speed Saw 3" - 6" Blade Range Digital Speed Display 1-Micron Sample Indexing Spring-Loaded Dressing Stick Attachment All Aluminum & Stainless Steel Construction
More informationUNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
More informationFlash Butt Welding Machines
Flash Butt Welding Machines Types AS 15 - AS 320 Flash butt welding current brake current (ka) current time flattening reversal preheating welding time flash butting forging A reliable and economic process
More informationIt's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
More informationScreen Melts. Introduction. Selecting Screen Material. Prefire Before Using. Spalling. Kiln Shelf
Introduction There are two terrific reasons for melting glass through screens. First because screen melts produce uniquely intricate patterns not possible any other way and second because it does it using
More informationSaw Tooth Design and Tipping Materials
Saw Tooth Design and Tipping Materials Bruce Lehmann, P.Eng, Ph.D. Sr. Engineer, Thin Kerf Technologies Inc. British Columbia, Canada Introduction The purposes of a saw tooth are to: 1. Remove a chip from
More informationBatibox TM flush-mounting boxes for dry partitions
flush-mounting boxes for dry partitions 800 51 800 42 800 53 800 54 800 42 + 800 71 800 77 Cat.Nos 1-gang boxes For 1 module 20 800 40 Drilling diameter 32 mm Depth 40 mm For 1 gang or 2 modules For wiring
More informationBETONYP building boards. The modern way of living.
BETONYP building boards The modern way of living. Tough for 30 years. Healthy, debarked pine wood and cement: the raw materials used to produce one of our most successful products for more than three decades.
More informationCHAPTER 82. Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal
NOTES : CHAPTER 82 Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal 1. Apart from blow lamps, portable forges, grinding wheels with frameworks, manicure or pedicure
More informationRouter Table Plans. www.bobsplans.com
www.bobsplans.com Router Table Plans Increase the capabilities of your router with this weekend project. Features a sliding fence with EZ-Mount clamps. These clamps are simple to make and grip tightly
More informationSCREWDRIVER SAFETY TIPS
SCREWDRIVER SAFETY TIPS Never use a screwdriver as a cold chisel, or for prying, punching, chiseling, scoring or scraping. Make sure the tip fits the slot of the screw; not too loose or tight. Never expose
More informationTRIMMING UNIT/DIAMOND MACHINE TST.13
TRIMMING UNIT/DIAMOND MACHINE TST.13 REFERENCE BOOK rel. 02.15 TRIMMING UNIT/DIAMOND MACHINE TST.13 REL. 02.15 ENGLISH LANGUAGE 1 MACHINE DESCRIPTION TST.13 was designed and built for processing methacrylate.
More information413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:
More informationMetal Bending Tools, Scribes & Awls
Metal Bending Tools, Scribes & Awls 35 malco tool book better ideas for the real world. Hand Seamers Die-Cast Zinc Jaws Not for use with steel Die-Cast Zinc Jaws Not for use with steel Easy Folding Bends
More informationORDER /RENDELÉS : Email: forrteam@gmail.com tel: +3630 6761265 Web:http://blackanddecker.atw.hu 1. oldal, összesen: 62
/ : Email: forrteam@gmail.com tel: +3630 6761265 Web:http://blackanddecker.atw.hu 1. oldal, összesen: 62 ORIG. 001. X50000 1 mm DRILL METAL DECKER 1 mm METAL / / METAL DRILL INPUT RANGE OF QUALITY BRAND.
More informationCLASS # 18 POWER SHIP AUGER BITS
POWER SHIP AUGER BITS Used in the construction industry, auger bits are used for deep bore drilling. They are well suited for use where small nails or other material may be present. These bits have a resharpenable
More informationDrilling and Demolition
Drilling and Demolition Hilti. Outperform. Outlast. 18 Intoduction Application and tool selector Page 20-21 Cordless rotary hammers Cordless rotary hammer TE 2-A22 Page 22 Cordless rotary hammer TE 6-A36-AVR
More informationVibration and Noise datasheet (13-127E)_Ver1.xls
and datasheet (13-127E)_Ver1.xls L WA L PA 1100 Planer 3,0 1,5 60745-2-14 Planing softwood 92 103 3 no load 1902 Planer 5,5 1,5 60745-2-14 Planing softwood 84 95 3 no load 2704 Table Saw - - 61029-2-1-94
More informationCutting Tool Materials
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of cutting tool metallurgy and specific tool applications for various
More informationMounting accessories TÖBB MINT VÁLASZTÉK
96 FOR ADHESIVE DISCS The adhesive discs with various dimension and shapes are easy to use for mounting. Because of their flexible types they are suitable for sanding of flat or curving surfaces. GRINDING
More informationCORDLESS TOOLS. People. Passion. Performance. WWW.CP-CORDLESS.COM FOR AUTOMOTIVE AND MAINTENANCE PROFESSIONALS
CORDLESS TOOLS FOR AUTOMOTIVE AND MAINTENANCE PROFESSIONALS People. Passion. Performance. WWW.CP-CORDLESS.COM Cordless Tools - Powered by Chicago Pneumatic 3 NO LIMITS Can you fix it? Can you reach it?
More informationRoloc TM. Discs. Easy to mount easy to change
Roloc TM Discs Provide a fast, efficient method for deburring, blending, finishing, removing tool marks and die polishing on all types of metals. Resist loading and shelling under severe operating conditions.
More informationCOLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES
COLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES I. OBJECTIVE To provide an overview and basic knowledge of the University of Wyoming, College of Engineering, equipment, tools,
More informationMeet the new freud. New Products: Innovations as well as heavy investment in up to date technology in the plants for superior product quality.
Meet the new freud 10 LSB45017X Meet the new freud 1 0.35 PATENTED SYSTEMS Ø450x4.8/3.5x60 Z72 HW n max 4200 RPM 8935 PATENTED SYSTEMS New Products: Innovations as well as heavy investment in up to date
More informationCORDLESS SCREWDRIVER + LAMP
CORDLESS SCREWDRIVER + LAMP Lightweight for fatigue-free work Ergonomically perfect design for any application Ideal for processing small and medium screws Magnetic bit holder Forward and reverse running
More informationMGB Chrome Bumper Conversion
MGB Chrome Bumper Conversion Installation Instructions For 1974 1/2-1980 MGB This kit requires cutting, welding, and painting. Professional installation recommended. Note: Every MGB body is slightly different
More informationVibration and Noise Information
Author TOOJH Rev(1) Product Ergonomics & Industrial Design 9 Jan -14 Page 1(25) Vibration and Noise Information VIBRATION AND NOISE INFORMATION... 1 INTRODUCTION... 2 GENERAL INFORMATION VALID FOR MOST
More informationDSM http://www.dsmmfg.com 1 (800) 886-6376
DESIGN GUIDE FOR BENT SHEET METAL This guide discusses how the bends are made, what thicknesses of sheet metal are commonly used, recommended bend radius to use when modeling the part, some practical limits
More informationHive Top Ventilation Shims
Hive Top Ventilation Shims When preparing your bee hives for the winter, it is very important to provide for ventilation at the top of the hive. Through out the winter, the bees are expelling a lot of
More informationAnodes and Misc Equipment
Anodes and Misc Equipment Application: Platinised Titanium Anodes Platinised titanium anodes are recommended for use in the following electrolytic processes:- Precious metal electroplating - e.g. Au, Pt,
More informationMaking Clock Wheel & Pinion Cutters
Making Clock Wheel & Pinion Cutters When making hand made clocks or in repair work an odd size cutter is sometimes needed. Sometimes just one pinion is required and does not justify the cost of a commercial
More informationElo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors
Installation Manual Elo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors SW602206 Rev B Table of Contents Chapter 1: Safety Warning... 3 Chapter 2: Kit Contents... 4 Included in Kit...
More informationINTRODUCTION UNDERSTANDING THE PRODUCT ABRASIVE TYPES
INTRODUCTION From standard aluminum oxide bench wheels to premium ceramic abrasive surface grinding wheels, Norton offers high performance abrasive solutions that can maximise productivity in virtually
More informationNOT SEARCHING, BUT FINDING
NOT SEARCHING, BUT FINDING We carefully ensure that our wide and extensive range provides a good assortment so that you feel in good hands, even if you are looking for portable measurement devices to provide
More informationPads for use on Dual Action / Random Orbital Sanders
70515V 5115 5" PSA 5/16 x 24 12,000 70516V 5116 6" PSA 5/16 x 24 10,000 J70515 5215 5" Hook 5/16 x 24 12,000 J70516 5216 6" Hook 5/16 x 24 10,000 Firm, low profile urethane molded pad with a heavy duty
More informationIF YOU NEED A POLE BARN OR DIY KIT CALL NOW AND LETS MAKE A DEAL
IF YOU NEED A POLE BARN OR DIY KIT CALL NOW AND LETS MAKE A DEAL Check out our Affordable Selection of DIY Pole Barn kit sizes and prices below. We offer a complete DIY pole barn kit plus independent experienced
More information%Ï51,75,' 6=(56=È02. 'LDPRQG DQG &%1 WRROV
82 TÖBB MINT VÁLASZTÉK DIAMOND CUT-OFF WHEELS Diamond cut-off wheels are excellently suitable for application of various stones and building materials. It is very important to choose the correct segmented
More informationHALE PET DOOR INSTALLATION INSTRUCTIONS HALE STANDARD PANEL MODEL
HALE PET DOOR INSTALLATION INSTRUCTIONS HALE STANDARD PANEL MODEL Please read these instructions carefully and completely before attempting to install Hale Pet Doors; they will guide you through the steps
More informationAA Solar and Sun Power Plus
AA Solar and Sun Power Plus www.aasolar.co.nz www.sunpowerplus.co.nz -1- Contents Chapter Title Page 1 General information 3 2 Safety and Installer Responsibilities 4 3 Technical Specifications 5 4 Tools
More informationCoated Abrasives. Hand Sanding Sheets
Hand Sanding Sheets 21 Hand Sanding Sheets Paper Sheets PB013 FLINT LIGHT PAPER SHEETS PB013 (flint light paper) Abrasive: Flint Backing Material: Light paper Economy product For use on paint, soft wood,
More informationIn-Track Repair of Concrete Ties. Deland Humpherys, Director Track Mtce
In-Track Repair of Concrete Ties Deland Humpherys, Director Track Mtce Concrete tie repairs: Shoulder repair process Normally the result of a derailment Lag removal and replacement process Broken lags
More informationBrick Veneer Construction
Brick Veneer Construction Check list of suggested tools & support items Claw hammer Tape measure 3/4" [19 or 20] Wood chisel Wood or plastic shims Pry bar Utility knife Caulking and caulking gun Power
More informationProduct catalogue, abrasive cutting
Product catalogue, abrasive cutting Cutting nozzle assemblies Abrasive jet cutting system Abrasive hopper Abrasive material www.hammelmann.com Contents (Navigation via Bookmarks) Cutting nozzle assemblies
More informationEXTeRUS. EXTeRUS - With patented design, able to join technology. and quality of materials with a charming shape. Unique
EXTeR US G L A S S - With patented design, able to join technology and quality of materials with a charming shape. Unique thanks to its outstanding loading capability with 150 kg maximum weight and height
More informationRight Angle Grinder USA MADE FLAP DISCS
USA MADE FLAP DISC Right Angle Grinder CGW Offers the Most Extensive Line of Flap Discs in the Marketplace CGW flap discs blend and finish in one operation which replaces the traditional twostep grinding
More informationPrecision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationCHARISMA SHOWER/TUB DOOR INSTALLATION INSTRUCTIONS
CHARISMA SHOWER/TUB DOOR INSTALLATION INSTRUCTIONS IMPORTANT DreamLine reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings,
More informationHOW-TO LAY HARDBOARD OR PLYWOOD FLOOR OVERLAY
HOW-TO HOW-TO LAY HARDBOARD OR PLYWOOD FLOOR OVERLAY Most floor coverings, if laid over uneven wooden floors, will wear unevenly and look unsightly. The answer is to cover the old boards with hardboard
More informationAdvantages and application of PCD and CBn tools
PCD and CBN tools Advantages and application of PCD and CBn tools Powerful and economical Tools with PCD and CBN cutting edges are the ideal solution for difficult-to machine, highly abrasive materials.
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION P 1 / 5 Model No. Description 8390D Cordless Percussion Driver Drill 13mm CONCEPT AND MAIN APPLICATIONS Model 8390D has been developed by adding percussion mechanism to Model 6390D.
More informationShower and Floor Gullies Channel Drain and Tile Drain SECTION
Shower and Floor Gullies Channel Drain and Tile Drain SECTION 2 Shower and Floor Gullies, Channel Drain and Tile Drain 29 General Information Shower and Floor Gullies McAlpine has responded to market conditions
More informationINSTRUCTIONS THOROUGHLY BEFORE BEGINNING***************
Bill of Materials: RAC0012 Green Wing Aerodynamic Skirt Kit Item Part Number Description Quantity 1 RMC0218 Gen 2 Trailer Skirt Roadside 1 2 RMC0219 Gen 2 Trailer Skirt Curbside 1 3 RMC0041 Trailer Skirt
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationInstallation Instructions
Installation Instructions 1. Position the unit onto bridging packers. These keep the unit away from any water sitting inside the frame. 2. Centralise the unit within the frame and pack the edges with appropriate
More informationLapping and Polishing Basics
Lapping and Polishing Basics Applications Laboratory Report 54 Lapping and Polishing 1.0: Introduction Lapping and polishing is a process by which material is precisely removed from a workpiece (or specimen)
More information758 Heavy-duty Ratchet Guy Wire Cutter
INSTRUCTION MANUAL 758 Heavy-duty Ratchet Guy Wire Cutter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product
More informationChoosing the Right Floor Protectors
Choosing the Right Floor Protectors You ve made the investment in new flooring for your home. So what can you do to help ensure your flooring stays looking like new? One of the biggest flooring maintenance
More informationStainless Steel. Systems for. Finishing. The Efficient and Economical Way to Produce Exceptional Finishes. Now Includes
3M Abrasives and Power Tools for Stainless Steel Finishing Now Includes 3M Fibre Disc 987C for Exceptional Life! Systems for Stainless Steel Finishing The Efficient and Economical Way to Produce Exceptional
More informationCOMBINATION SLAB & TRIM SAW INSTRUCTIONS 12, 14, & 16 MODELS
COMBINATION SLAB & TRIM SAW INSTRUCTIONS 12, 14, & 16 MODELS DESCRIPTION Covington s Combination Trim & Slab Saws are similar in design with different blade and pulley sizes. Sawing operations remain the
More informationANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013
STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME
More informationSTAVAX SUPREME. Stainless tool steel
STAVAX SUPREME Stainless tool steel General Demands placed on plastic mould tooling are increasing. Such conditions require mould steels that possess a unique combination of toughness, corrosion resistance
More informationRAPID DIAL TEST INDICATORS
RAPID DIAL TEST INDICATORS The Verdict Rapid presents the dial face inclined to the workpiece surface ensuring good visual accessibility obviating parallax error. Rapids incorporate a rear swivel spigot
More informationLU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
More informationThickness Gauges. convex R 15 or R 40, flat 10 mm Ø, spherical
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 130 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 130
More informationMilling Chuck Features
Milling Chuck Features Since its first introduction into the industry in 1963, Nikken has sold over 2,000,000 worldwide and never stopped improving its original design. Featuring multi-roller bearings
More informationPART E SPECIFICATIONS
PART E SPECIFICATIONS Page 1 of 5 PART E - SPECIFICATIONS GENERAL E1. APPLICABLE SPECIFICATIONS, STANDARD DETAILS AND DRAWINGS E1.1 The City of Winnipeg Works and Operations Division Standard Construction
More information$117.99 $31.99 $39.99 $23.99. Things to consider when buying your next socket set:
D004006 47 Piece 6 Point Standard/Deep SAE/Metric Socket Set SAE Standard: 3/16"-9/16" SAE Deep: 3/16"-9/16" Metric Standard: 4-14 mm Metric Deep: 4-12 mm 2", 6" Extensions Hand Driver U-Joint 45 Tooth
More informationRAMAX S Prehardened stainless holder steel
T O O L S T E E L F A C T S RAMAX S Prehardened stainless holder steel Wherever tools are made Wherever tools are used This information is based on our present state of knowledge and is intended to provide
More informationDigital Fingerprint safe
Digital Fingerprint safe Model 96846 Operation Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product
More informationGRINDING AND CUTTING-OFF WHEELS
GRINDING AND CUTTING-OFF WHEELS The Flexovit Brand History Founded in the Netherlands, Flexovit began manufacturing cutting-off and grinding wheels in 1958. By 1960, Flexovit had carved out its ambition
More informationDiamond Coring. Diamond Coring. Hilti. Outperform. Outlast.
Diamond Coring Hilti. Outperform. Outlast. 72 Diamond coring tools Diamond coring tool DD EC-1 Page 74 Diamond coring tool DD 120 Page 75 Diamond coring tool DD 160 Page 76 Diamond coring tool DD 200 Page
More informationPrecision Vise Combinations
Precision Vise Combinations PanaVise vises and work holding tools have hundreds of uses limited only by your imagination! Each vise allows the head to Tilt, Turn & Rotate and position your work anywhere
More informationVe-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
More informationPRELIMINARY BROCHURE. Uddeholm Ramax HH
PRELIMINARY BROCHURE Uddeholm Ramax HH Uddeholm Ramax HH Uddeholm Ramax HH provides several benefits: The product offers uniform hardness in all dimensions combined with excellent indentation resistance.
More informationDO NOT OPERATE LANCELOT OR SQUIRE WITHOUT FIRST ADJUSTING THE SAFETY GUARD. ( See Below)
Assembly Instructions - Lancelot and Squire King Arthur s Tools (KAT) is pleased to present the first tandem mounted saw chain accessories whereby differing combinations of Lancelot and Squire may be paired
More informationTools for all Floors and all Machines
3.1 Selection Guide Tools for all Floors and all Machines As one of our specialities we have in our production developed a complete program of top quality tools for the grinding of all kinds of concrete
More information3/4 PIPE CLAMP WITH STAND
3/4 PIPE CLAMP WITH STAND Model 94053 ASSEMBLY AND OPERATING INSTRUCTIONS (3/4 DIAMETER PIPE NOT INCLUDED.) 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com
More informationDRILLS MODEL DESCRIPTION PART NO. M.R.P.
DRILLS GBM 6 6mm High Speed Drill - 4000 rpm 0 601145 107 3225 GBM 10 10 mm Heavy Duty High Torque Drill 0 601 135 090 4200 New! GBM 10 RE 10 mm Heavy Duty High Torque Drill, Reversible 0 601 4735KO 4750
More informationStainless Steel Cable Assemblies to Enhance Any Railing and Any View!
2014 Feeney (9/14) King Architectural Metals Stainless Steel Cable Assemblies to Enhance Any Railing and Any View! Standard Cable Assemblies Easy-to-install, prefabricated cable assemblies are an attractive,
More informationHigh speed machining and conventional die and mould machining
High speed machining and conventional die and mould machining Reprint from HSM - High Speed Machining There are a lot of questions about HSM today and many different, more or less complicated, definitions
More informationRaised Panel Doors Made Simple With Freud s 2+2 Raised Panel Bit Set
Raised Panel Doors Made Simple With Freud s 2+2 Raised Panel Bit Set Congratulations on your purchase of Freud s world class 2 + 2 Raised Panel Bit Set. This revolutionary design combines two small wings
More informationSTANDARD SPECIFICATIONS SECTION 05500 METAL FABRICATIONS
STANDARD SPECIFICATIONS SECTION 05500 METAL FABRICATIONS PART 1 GENERAL 1.1 DESCRIPTION A. Section includes requirements for providing metal fabricated items like castings, gratings, hatchways, ladders,
More informationCutting the World. Cutting tools. for rotary drum cutters
Cutting the World Cutting tools for rotary drum cutters Round attack picks, pick boxes, retaining clips for erkat rotary drum cutters and cutter wheels erkat rotary drum cutters work under extremely hard
More informationHMHF DIRECT DRIVE BELT DRIVE. Manufactured by UDY Corporation. Cyclone Models Available:
Cyclone Models Available: HMHF DIRECT DRIVE BELT DRIVE INITIAL PARTICLE SIZE: MATERIALS MILLABLE: PARTICLE SIZE GENERATED: SAMPLE FEED INTO THE MILL: SAMPLE MILL GRINDING CHAMBER: GRINDING RATE AND COLLECTION
More informationBUILDINGA 1/10 SCALE FLATBED TRAILER
VOLUME 1, ISSUE 1 BUILDINGA 1/10 SCALE FLATBED TRAILER BUILT, DESIGNED & WRITTEN BY NATHAN MYERS MATERIALS: FEATURES: While the design was kept simple to allow anyone to be able to build their own trailer,
More informationNew potential for hand-guided routers
Routing Back 652 Routing Overview Bosch Accessories 11/12 New potential for hand-guided routers Bosch offers a compact, clearly structured range of router bits for a wide range of applications. And this
More informationAccessories for GF and RA machines
Orbital cutting & beveling machines for high-purity process piping www.orbitalum.com Accessories for GF and RA machines A brand of ITW Orbital Cutting & Welding 23 www.orbitalum.com Orbital cutting & beveling
More informationPermanent Stainless Steel Anchorage Point for Concrete, Solid Masonry and Steel Constructions
ABS-Lock X / X - SR Permanent Stainless Steel Anchorage Point for Concrete, Solid Masonry and Steel Constructions The ABS-Lock X system was developed to provide both a secure single anchorage point for
More information