Stainless steel hygienic butterfly valves. F250 for imperial tubing F251 for metric tubing

Transcription

1 Stainless steel hygienic butterfly valves. F0 for imperial tubing F for metric tubing Features Keystone technology. Quarter turn operation. Isolation or regulation control. Equal percentage characteristics. Bi-directional capability. Fully machined L stainless steel body. Optional end connections. One-piece disc and stem assembly. High C v slim profile disc. Integral valve position indicator. High grade seat material options. Combination dual or multi position handle assembly. High impact reinforced polymer handle with a stainless steel drive (full stainless steel option available). Integral padlocking as standard on manual valves. Maintenance friendly. Site repairable. Full range of optional accessories. General Applications A universal valve for isolation and control, in the food, dairy, brewing, pharmaceutical, beverage and chemical industries. The Figure 0 and are designed to be easily automated with any of Keystone s actuators and controls. From the Figure Vertical Actuator and Figure Electronic Control Head, to the Figure 0 or Figure S actuator. Flow Control Keystone is either a trademark or registered trademark of Tyco International Services AG or its affiliates in the United States and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Copyright 00 Tyco Flow Control. All rights reserved. 0/0

2 Specifications Technical Data Max Product 0 C 000 kpa (0 bar) Recommended Working 0 C 00 kpa ( bar) Minimum Product 0 C Full Vacuum General Temperature Range -0 C to C Maximum Static Temperature Silicon: 0 C Epdm: 0 C Nitrile: 00 C Viton : 0 C Note: Although the various seat materials available can withstand temperatures above the C stated for short periods of time, such as for sterilization and certain applications, the serviceability of these seats at elevated temperatures does vary depending on the media, pressure and other variables. Therefore, this is best determined from experience gained with the application concerned. Parts List No. Description Material Standard Body L SS ASTM A Disc Stem SS ASTM A CFM Seat Silicon (White) FDA EPDM (Black) FDA Nitrile (Black) FDA Viton (Red) Handle Assembly High Impact Glass Reinforced Polymer or 0 SS Handle Plug/Screw Santoprene/0 SS Commercial Notch Plate 0 SS ASTM A CF Body Fasteners 0 SS ASTM A Bearings PVDF Commercial Copyright 00 Tyco Flow Control. All rights reserved.

3 E Valve Body Holes C Actuator Mounting Holes F ØA ØA PCD ØB D F0 Imperial Valve Dimensions (mm) Valve Size ØA ØA ØB C D E F PCD No. Hole Stem Conn. Mass Kv DN Imperial Holes Dia (kg) (Fully Open) " mm sq /" mm sq " mm sq.. /" mm sq " mm sq " mm sq.. " mm sq " mm sq.. 00 F Metric Valve Dimensions (mm) Valve Size ØA ØA ØB C D E F PCD No. Hole Stem Conn. Mass Kv DN Imperial Holes Dia (kg) (Fully Open) " mm sq. 0. /".. 0. mm sq /".. 0. mm sq " mm sq.. /" mm sq.. 0 " mm sq " mm sq.. " mm sq " mm sq.. 00 Notes: Dimensions D and A, shown above, are for the butt weld configuration only. For other types of connections, refer to attached End Connection data. Dimension E is the maximum clearance length for either handle. Masses shown are for bare shafted butt weld valves only. Copyright 00 Tyco Flow Control. All rights reserved.

4 F0 Imperial Valve Available End Connections [ to 0 mm] [ to 00 mm] [ to 00 mm] [ to 00 mm] ØA ØA ØA ØG ØA ØG ØA ØA D Butt weld (std) for inch tubing (O.D. tubes) ISO 0/BS -/AS - D IDF/FIL male part connection ISO /BS- D RJT/BSM male part connection BS - D Clamp connection ISO Dimensions [mm] DN Imperial ØA ØA ØA ØA ØA ØG ØG D D D D " IDF " RJT " 0 /" IDF /" RJT /" 0 " IDF " RJT " /" IDF /" RJT /" 0 " IDF " RJT " 0 00 " IDF " RJT " 0 0 " Note: BSM modified version is available upon request, deduct. mm from dimension D. F Metric Valve Available End Connections [ to 0 mm] [ to 0 mm] [ to 0 mm] [ to 0 mm] ØA ØA ØA Rd ØA ØG ØA ØA D D D D Butt weld (std) for tubing DIN 0, sheet - Connection male part DIN / BSP male DIN ISO Clamp Connection DIN Dimensions [mm] DN Imperial ØA ØA ØA ØG D D D Rd ". 0. G " Rd x /" /". 0. G /" Rd x /" 0 /". 0. G /" Rd x /" 0 " 0. G " Rd x /" /" 0. G /" Rd x /" 0 ". 0 G " Rd 0 x /" 00 " G " Rd 0 x /" ". 0 Rd 0 x /" 0 " 0. 0 Rd 0 x /" Copyright 00 Tyco Flow Control. All rights reserved.

5 F0 Pressure Drop / Flow Rates Graph Pressure Drop kpa mm (") 0 mm ( /") 0 mm (") mm ( /") 0 mm (") 00 mm (") 0 mm (") Note: This chart is based on an F0 valve fully open, using 0 C. Flow m /hr F Pressure Drop / Flow Rates Graph Pressure Drop kpa mm (") 0 mm ( /") 0 mm (") mm ( /") 0 mm (") 00 mm (") 0 mm (") Flow m /hr Note: This chart is based on an F valve fully open, using 0 C. Copyright 00 Tyco Flow Control. All rights reserved.

6 Typical Specifying Sequence Example: 00 F0 CLP/RJT HS Valve Size, inches [mm] 0 " [DN] 0." [DN] 00." [DN0] 00 " [DN0] 0." [DN] 00 " [DN0] 00 " [DN00] " [DN] 0 " [DN0] Figure F0 - Imperial tubing wafer style butterfly valve F - Metric tubing wafer style butterfly valve Trim Seat Body Disc Bearing EPDM 0L L PVDF Silicon 0L L PVDF Nitrile 0L L PVDF Viton 0L L PVDF Viton L L PVDF EPDM L L PVDF Silicon L L PVDF Nitrile L L PVDF End Connections Weld Ends Thread Ends BW - Butt Weld BSP - Internal Thread (BSPT) BWD - Butt Weld DIN Tube DIN - DIN Thread (Fabricated) PAP - BW Extension Tube 0. mm Long HEX - Hexagonal Nut and Liner, RJT WAF - Wafer valve and BW flanges HXM - Hexagonal Nut and Liner Mod, RJT WBO - Wafer valve without flanges IDF - BS/ISO/Japanese Standard Clamp Ends NPT - NPT Taper Thread (Fabricated) CLF - Clamp Ends (Fabricated) NPF - NPT Taper Thread CLP - Clamp (Machined) RJF - RJT Male part (Fabricated) DCL - DIN Clamp End, DIN sizing RJL - RJT Male part Long (Machined) ILN - I Line, Male Spigot RJM - RJT Male part (Machined) (BSM) Modified Spigot RJT - RJT Male part Machined RND - Round Nut and Liner, RJT SMS - SMS Male part, External Thread TPI (Machined) SMF - SMS Male part, External Thread TPI (Fabricated) Extended Definer HP - F Polymer Handle HS - F 0 Stainless Handle HS - F 0 Stainless Handle Tyco Flow Control (TFC) provides the information herein in good faith but makes no representation as to its comprehensiveness or accuracy. This data sheet is intended only as a guide to TFC products and services. Individuals using this data sheet must exercise their independent judgment in evaluating product selection and determining product appropriateness for their particular purpose and system requirements. TFC MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE INFORMATION SET FORTH HEREIN OR THE PRODUCT(S) TO WHICH THE INFORMATION REFERS. ACCORDINGLY, TFC WILL NOT BE RESPONSIBLE FOR DAMAGES (OF ANY KIND OR NATURE, INCLUDING INCIDENTAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES) RESULTING FROM THE USE OF OR RELIANCE UPON THIS INFORMATION. Patents and Patents Pending in the U.S. and foreign countries. Tyco reserves the right to change product designs and specifications without notice. All registered trademarks are the property of their respective owners. Printed in the USA. Copyright 00 Tyco Flow Control. All rights reserved.