LUXEON 3535L Line. High efficacy in a 3535 package with full range of CCTs and CRIs ILLUMINATION
|
|
|
- Jasmine Warner
- 7 years ago
- Views:
Transcription
1 ILLUMINATION LUXEON 3535L Line High efficacy in a 3535 package with full range of CCTs and CRIs The LUXEON 3535L Line boasts the efficacy and reliability required by the indoor and outdoor illumination markets. It delivers optimized performance in combination with the Quality of Light needed for distributed light source applications in four performance levels. In addition to offering specified correlated color temperature and color rendering combinations, LUXEON 3535L Line is available in four products: LUXEON 3535LS Entry Flux and Efficacy LUXEON 3535L Medium Flux and Efficacy LUXEON 3535L HE High Flux and Efficacy LUXEON 3535L HE Plus High Flux and Highest Efficacy FEATURES AND BENEFITS Supports ENERGY STAR lumen maintenance certification requirements Maximum drive current of 300mA delivers superior lumens for reduced LED count for LUXEON 3535L HE and LUXEON 3535L HE Plus PRIMARY APPLICATIONS Architectural Downlights 1/7 th ANSI color binning delivers tight color control High Bay & Low Bay Enables T s points of 105 C which allows for higher board temperature Full range of CCTs and CRI configurations for design flexibility UL-recognized component [E352519] Indoor Area Lighting Lamps Specialty Lighting Spotlights DS203 LUXEON 3535L Product Datasheet 2016 Lumileds Holding B.V. All rights reserved. No. E352519
2 Table of Contents General Product Information...2 Product Test Conditions...2 Part Number Nomenclature...2 Lumen Maintenance...2 Environmental Compliance...2 Performance Characteristics...3 Product Selection Guide....3 Optical Characteristics...5 Electrical and Thermal Characteristics....5 Absolute Maximum Ratings...5 Characteristic Curves...6 Spectral Power Distribution Characteristics...6 Light Output Characteristics...7 Forward Current Characteristics....8 Radiation Pattern Characteristics...9 Product Bin and Labeling Definitions...10 Decoding Product Bin Labeling Luminous Flux Bins...10 Color Bin Definitions...11 Forward Voltage Bins...20 Mechanical Dimensions Reflow Soldering Guidelines...21 JEDEC Moisture Sensitivity...21 Solder Pad Design...22 Packaging Information Pocket Tape Dimensions...22 Reel Dimensions...23 DS203 LUXEON 3535L Product Datasheet Lumileds Holding B.V. All rights reserved. i
3 General Product Information Product Test Conditions LUXEON 3535L Line LEDs are tested and binned with a 20ms monopulse of 100mA at a junction temperature, T j, of 25 C. Part Number Nomenclature Part numbers for LUXEON 3535LS, LUXEON 3535L, and LUXEON 3535L HE follow the convention below: Where: M X A B - P W C C - D E E E B designates minimum CRI (7=70CRI, 8=80CRI and 9=85CRI or 90CRI) C C designates nominal ANSI CCT (22=2200K, 25=2500K, 27=2700K, 30=3000K, 35=3500K, 40=4000K, 50=5000K, 57=5700K, 65=6500K) D designates product family in standard parts (0 or 9=LUXEON 3535L, H=LUXEON 3535L HE, S=LUXEON 3535LS) E E E designates options for detailed product specification Therefore, the following part number is used for a LUXEON 3535L HE 3000K 80CRI: M X A 8 - P W H Part numbers for LUXEON 3535L HE Plus follow the convention below: L A A B B - C A P 1 Where: A A designates nominal ANSI CCT (27=2700K, 30=3000K, 35=3500K, 40=4000K, 50=5000K, 57=5700K, 65=6500K) B B designates minimum CRI (8=80CRI) Therefore, the following part number is used for a LUXEON 3535L HE Plus 3000K 80CRI: L C A P 1 LUXEON 3535L Line is available in four performance levels: LUXEON 3535LS LUXEON 3535L LUXEON 3535L HE LUXEON 3535L HE Plus Entry Flux and Efficacy Medium Flux and Efficacy High Flux and Efficacy High Flux and Highest Efficacy Lumen Maintenance Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product. Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON 3535L Line is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). DS203 LUXEON 3535L Product Datasheet Lumileds Holding B.V. All rights reserved. 2
4 Performance Characteristics Product Selection Guide Table 1. Product performance of LUXEON 3535L Line at 100mA and 65mA, T j =25ºC. PRODUCT NOMINAL CCT [1] LUXEON 3535LS LUXEON 3535L MINIMUM CRI [2] LUMINOUS FLUX [3] (lm) MINIMUM TYPICAL 100mA TYPICAL LUMINOUS EFFICACY (lm/w) TYPICAL LUMINOUS FLUX (lm) TYPICAL LUMINOUS EFFICACY (lm/w) 65mA PART NUMBER 4000K MXA7-PW40-S K MXA7-PW50-S K MXA7-PW57-S K MXA7-PW65-S K MXA8-PW22-S K MXA8-PW25-S K MXA8-PW27-S K MXA8-PW30-S K MXA8-PW35-S K MXA8-PW40-S K MXA8-PW50-S K MXA8-PW57-S K MXA8-PW65-S K MXA9-PW27-S K MXA9-PW30-S K MXA7-PW K MXA7-PW K MXA7-PW K MXA7-PW K MXA8-PW K MXA8-PW K MXA8-PW K MXA8-PW K MXA8-PW K MXA8-PW K MXA8-PW K MXA8-PW K MXA8-PW K MXA9-PW K MXA9-PW K MXA9-PW K MXA9-PW Notes for Table 1: 1. Correlated color temperature is based upton mounted die on highly reflective surface at T j =25 C. 2. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed. 3. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements. DS203 LUXEON 3535L Product Datasheet Lumileds Holding B.V. All rights reserved. 3
5 Table 1. Product performance of LUXEON 3535L Line at 100mA and 65mA, T j =25ºC (continued). PRODUCT NOMINAL CCT [1] LUXEON 3535L HE LUXEON 3535L HE Plus MINIMUM CRI [2] LUMINOUS FLUX [3] (lm) MINIMUM TYPICAL 100mA TYPICAL LUMINOUS EFFICACY (lm/w) TYPICAL LUMINOUS FLUX (lm) TYPICAL LUMINOUS EFFICACY (lm/w) 65mA PART NUMBER 4000K MXA7-PW40-H K MXA7-PW50-H K MXA7-PW57-H K MXA7-PW65-H K MXA8-PW22-H K MXA8-PW25-H K MXA8-PW27-H K MXA8-PW30-H K MXA8-PW35-H K MXA8-PW40-H K MXA8-PW50-H K MXA8-PW57-H K MXA8-PW65-H K MXA9-PW27-H K MXA9-PW30-H K MXA9-PW35-H K MXA9-PW40-H K MXA9-PW50-H K MXA9-PW57-H K MXA9-PW65-H K L CA35000P1 3000K L CA35000P1 3500K L CA35000P1 4000K L CA35000P1 5000K L CA35000P1 5700K L CA35000P1 6500K L CA35000P1 Notes for Table 1: 1. Correlated color temperature is based upton mounted die on highly reflective surface at T j =25 C. 2. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is not guaranteed. 3. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous flux measurements. DS203 LUXEON 3535L Product Datasheet Lumileds Holding B.V. All rights reserved. 4
6 Optical Characteristics Table 2. Optical characteristics for LUXEON 3535L Line at 100mA, T j =25ºC. PART NUMBER TYPICAL TOTAL INCLUDED ANGLE [1] TYPICAL VIEWING ANGLE [2] MXAx-PWxx-xxxx L135-xxxxCA35000P Notes for Table 2: 1. Total angle at which 90% of total luminous flux is captured. 2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value. Electrical and Thermal Characteristics Table 3. Electrical and thermal characteristics for LUXEON 3535L Line at 100mA, T j =25ºC. PART NUMBER FORWARD VOLTAGE [1] (V f ) MINIMUM TYPICAL MAXIMUM TYPICAL TEMPERATURE COEFFICIENT OF FORWARD VOLTAGE [2] (mv/ C) TYPICAL THERMAL RESISTANCE JUNCTION TO SOLDER PAD ( C/W) MXAx-PWxx-S to MXAx-PWxx to MXAx-PWxx-H to L135-xxxxCA35000P to Notes for Table 3: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Measured between 25 C and 110 C. Absolute Maximum Ratings Table 4. Absolute maximum ratings for LUXEON 3535L Line. PARAMETER MAXIMUM PERFORMANCE [1, 2] 200mA DC Forward Current [1, 3] 240mA Peak Pulsed Forward Current for MXAx-PWxx-S001 and MXAx-PWxx mA for MXAx-PWxx-H001 and L135-xxxxCA35000P1 for MXAx-PWxx-S001 and MXAx-PWxx mA for MXAx-PWxx-H001 and L135-xxxxCA35000P1 LED Junction Temperature [1] (DC & Pulse) 125 C ESD Sensitivity (ANSI/ESDA/JEDEC JS ) Class 2 Operating Case Temperature [1] -40 C to 105 C LED Storage Temperature -40 C to 105 C Soldering Temperature JEDEC 020D 260 C Allowable Reflow Cycles 3 Reverse Voltage (V reverse ) -5V Notes for Table 4: 1. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called ripple, are acceptable if the following conditions are met: The frequency of the ripple current is 100Hz or higher The average current for each cycle does not exceed the maximum allowable DC forward current The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current 2. At 10% duty cycle with pulse width of 10ms. 3. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature. DS203 LUXEON 3535L Product Datasheet Lumileds Holding B.V. All rights reserved. 5
7 Characteristic Curves Spectral Power Distribution Characteristics Figure 1a. Typical normalized power vs. wavelength for 70CRI LUXEON 3535L Line at 100mA, T j =25ºC. Figure 1b. Typical normalized power vs. wavelength for 80CRI LUXEON 3535L Line at 100mA, T j =25ºC. DS203 LUXEON 3535L Product Datasheet Lumileds Holding B.V. All rights reserved. 6
8 Figure 1c. Typical normalized power vs. wavelength for 90CRI LUXEON 3535L Line at 100mA, T j =25ºC. Light Output Characteristics LUXEON 3535L LUXEON 3535LS LUXEON 3535L HE LUXEON 3535L HE Plus Figure 2. Typical normalized light output vs. junction temperature for LUXEON 3535L Line at 100mA. DS203 LUXEON 3535L Product Datasheet Lumileds Holding B.V. All rights reserved. 7
9 LUXEON 3535L LUXEON 3535LS LUXEON 3535L HE LUXEON 3535L HE Plus Figure 3. Typical normalized light output vs. forward current for LUXEON 3535L Line at T j =25ºC. Forward Current Characteristics LUXEON 3535L LUXEON 3535LS LUXEON 3535L HE LUXEON 3535L HE Plus Figure 4. Typical forward current vs. forward voltage for LUXEON 3535L Line at T j =25ºC. DS203 LUXEON 3535L Product Datasheet Lumileds Holding B.V. All rights reserved. 8
10 Radiation Pattern Characteristics LUXEON 3535L LUXEON 3535LS LUXEON 3535L HE LUXEON 3535L HE Plus Figure 5. Typical radiation pattern for LUXEON 3535L Line at 100mA, T j =25ºC. LUXEON 3535L LUXEON 3535LS LUXEON 3535L HE LUXEON 3535L HE Plus Figure 6. Typical polar radiation pattern for LUXEON 3535L Line at 100mA, T j =25ºC. DS203 LUXEON 3535L Product Datasheet Lumileds Holding B.V. All rights reserved. 9
11 Product Bin and Labeling Definitions Decoding Product Bin Labeling In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or dominant wavelength and forward voltage. LUXEON 3535L Line LEDs are labeled using a 4 or 5-digit alphanumeric CAT code following the format below: A B C D or A x B C D Where: A designates luminous flux bin (example: M=36 to 40 lumens, R=48 to 52 lumens) x designates internal Lumileds code B C designates color bin (example: 7Z, 71, 72, 73, 74, 75, 76) for 3000K parts D designates forward voltage bin (example: S=2.70 to 2.80V, T=2.80 to 2.90V) Therefore, a LUXEON 3535L HE with a lumen range of 36 to 40, color bin of 7Z and a forward voltage range of 2.80 to 2.90V has the following CAT code: M 7 Z T Luminous Flux Bins Table 5 lists the standard photometric luminous flux bins for LUXEON 3535L Line emitters. Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs. Table 5. Luminous flux bin definitions for LUXEON 3535L Line. BIN MINIMUM LUMINOUS FLUX [1] (lm) MAXIMUM J K L M P Q R S T Notes for Table 5: 1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements. DS203 LUXEON 3535L Product Datasheet Lumileds Holding B.V. All rights reserved. 10
12 Color Bin Definitions A5 A3 A y A6 A4 A x Figure 7. 3-step MacAdam ellipse illustration for Table 6. Figure 8a. Color bin structure for LUXEON 3535L Line 2200K. Table 6a. Color bin definitions for MXAx-PW22-xxxx. BIN x y BIN x y A1 A2 A A A A Notes for Table 6a: 1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space. 2. Tested and binned at 25ºC and I f =100mA. DS203 LUXEON 3535L Product Datasheet Lumileds Holding B.V. All rights reserved. 11
13 y x Figure 8b. Color bin structure for LUXEON 3535L Line 2500K. Table 6b. Color bin definitions for MXAx-PW25-xxxx. BIN x y BIN x y Notes for Table 6b: 1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space. 2. Tested and binned at 25ºC and I f =100mA. DS203 LUXEON 3535L Product Datasheet Lumileds Holding B.V. All rights reserved. 12
14 y Z K K x Figure 8c. Color bin structure for LUXEON 3535L Line 2700K. Table 6c-1. Color bin definitions for MXAx-PW27-xxxx. BIN x y BIN x y Table 6c-2. Color bin definition for single 3-step MacAdam ellipse for MXAx-PW27-xxxx. COLOR SPACE CENTER POINT (cx, cy) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ 8Z (0.4578, ) º Notes for Tables 6c-1 and 6c-2: 1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space. 2. Tested and binned at 25ºC and I f =100mA. DS203 LUXEON 3535L Product Datasheet Lumileds Holding B.V. All rights reserved. 13
15 y 7Z K K x Figure 8d. Color bin structure for LUXEON 3535L Line 3000K. Table 6d-1. Color bin definitions for MXAx-PW30-xxxx. BIN x y BIN x y Table 6d-2. Color bin definition for single 3-step MacAdam ellipse for MXAx-PW30-xxxx. COLOR SPACE CENTER POINT (cx, cy) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ 7Z (0.4338, ) º Notes for Tables 6d-1 and 6d-2: 1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space. 2. Tested and binned at 25ºC and I f =100mA. DS203 LUXEON 3535L Product Datasheet Lumileds Holding B.V. All rights reserved. 14
16 y Z K K x Figure 8e. Color bin structure for LUXEON 3535L Line 3500K. Table 6e-1. Color bin definitions for MXAx-PW35-xxxx. BIN x y BIN x y Table 6e-2. Color bin definition for single 3-step MacAdam ellipse for MXAx-PW35-xxxx. COLOR SPACE CENTER POINT (cx, cy) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ 6Z (0.4073, ) º Notes for Tables 6e-1 and 6e-2: 1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space. 2. Tested and binned at 25ºC and I f =100mA. DS203 LUXEON 3535L Product Datasheet Lumileds Holding B.V. All rights reserved. 15
17 y Z K K x Figure 8f. Color bin structure for LUXEON 3535L Line 4000K. Table 6f-1. Color bin definitions for MXAx-PW40-xxxx. BIN x y BIN x y Table 6f-2. Color bin definition for single 3-step MacAdam ellipse for MXAx-PW40-xxxx. COLOR SPACE CENTER POINT (cx, cy) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ 5Z (0.3818, ) º Notes for Tables 6f-1 and 6f-2: 1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space. 2. Tested and binned at 25ºC and I f =100mA. DS203 LUXEON 3535L Product Datasheet Lumileds Holding B.V. All rights reserved. 16
18 y Z K K x Figure 8g. Color bin structure for LUXEON 3535L Line 5000K. Table 6g-1. Color bin definitions for MXAx-PW50-xxxx. BIN x y BIN x y Table 6g-2. Color bin definition for single 3-step MacAdam ellipse for MXAx-PW50-xxxx. COLOR SPACE CENTER POINT (cx, cy) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ 3Z (0.3447, ) º Notes for Tables 6g-1 and 6g-2: 1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space. 2. Tested and binned at 25ºC and I f =100mA. DS203 LUXEON 3535L Product Datasheet Lumileds Holding B.V. All rights reserved. 17
19 y Z K K x Figure 8h. Color bin structure for LUXEON 3535L Line 5700K. Table 6h-1. Color bin definitions for MXAx-PW57-xxxx. BIN x y BIN x y Table 6h-2. Color bin definition for single 3-step MacAdam ellipse for MXAx-PW57-xxxx. COLOR SPACE CENTER POINT (cx, cy) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ 2Z (0.3287, ) Notes for Tables 6h-1 and 6h-2: 1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space. 2. Tested and binned at 25ºC and I f =100mA. DS203 LUXEON 3535L Product Datasheet Lumileds Holding B.V. All rights reserved. 18
20 y 15 1Z K K x Figure 8i. Color bin structure for LUXEON 3535L Line 6500K. Table 6i-1. Color bin definitions for MXAx-PW65-xxxx. BIN x y BIN x y Table 6i-2. Color bin definition for single 3-step MacAdam ellipse for MXAx-PW65-xxxx. COLOR SPACE CENTER POINT (cx, cy) MAJOR AXIS, a MINOR AXIS, b ELLIPSE ROTATION ANGLE, θ 1Z (0.3123, ) Notes for Tables 6i-1 and 6i-2: 1. Lumileds maintains a tolerance of ±0.007 on x and y coordinates in the CIE 1931 color space. 2. Tested and binned at 25ºC and I f =100mA. DS203 LUXEON 3535L Product Datasheet Lumileds Holding B.V. All rights reserved. 19
21 Forward Voltage Bins Table 7. Forward voltage bin definitions for LUXEON 3535L Line. BIN MINIMUM FORWARD VOLTAGE [1] (V f ) MAXIMUM S T V W X Y Notes for Table 7: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Tested and binned at 25ºC and I f =100mA. Mechanical Dimensions Figure 9. Mechanical dimensions for LUXEON 3535L Line. Notes for Figure 9: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS203 LUXEON 3535L Product Datasheet Lumileds Holding B.V. All rights reserved. 20
22 Reflow Soldering Guidelines t p T p Ramp-up Critical Zone T L to T p T L Temperature T smax t L T smin t s Preheat Area Ramp-down 25 Time 25ºC to Peak Time JEDEC J-STD-020D Figure 10. Visualization of the acceptable reflow temperature profile as specified in Table 8. Table 8. Reflow profile characteristics for LUXEON 3535L Line. PROFILE FEATURE LEAD-FREE ASSEMBLY Preheat Minimum Temperature (T smin ) 150 C Preheat Maximum Temperature (T smax ) 200 C Preheat Time (t smin to t smax ) 60 to 120 seconds Ramp-Up Rate (T L to T p ) 3 C / second maximum Liquidus Temperature (T L ) 217 C Time Maintained Above Temperature T L (t L ) 60 to 150 seconds Peak / Classification Temperature (T p ) 260 C Time Within 5 C of Actual Temperature (t p ) 10 to 30 seconds Ramp-Down Rate (T p to T L ) 6 C / second maximum Time 25 C to Peak Temperature 8 minutes maximum JEDEC Moisture Sensitivity Table 9. Moisture sensitivity levels for LUXEON 3535L Line. FLOOR LIFE SOAK REQUIREMENTS STANDARD LEVEL TIME CONDITIONS TIME CONDITIONS 2 1 Year 30 C / 60% RH 168 Hours +5 / C / 60% RH DS203 LUXEON 3535L Product Datasheet Lumileds Holding B.V. All rights reserved. 21
23 -0 Solder Pad Design Solder mask Stencil Top copper Package geometric center Package and pad outlines Notes for Figure 11: 1. Drawings are not to scale. 2. All dimensions are in millimeters. Figure 11. Recommended PCB solder pad layout for LUXEON 3535L Line. Packaging Information Pocket Tape Dimensions 1,5 +0,1-0 4±0,1 2±0,05 1,75±0,1 1,2±0,1 5,5±0, ,3-0,1 3,95±0,1 1,5 +0,25 8±0,1 3,8±0,1 0,28±0,02 Figure 12. Pocket tape dimensions for LUXEON 3535L Line. Notes for Figure 12: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS203 LUXEON 3535L Product Datasheet Lumileds Holding B.V. All rights reserved. 22
24 Reel Dimensions 18.4 (max, measure at hub) +0,5-0,2 13, min 100 +/ , Figure 13. Reel dimensions for LUXEON 3535L Line. Notes for Figure 13: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS203 LUXEON 3535L Product Datasheet Lumileds Holding B.V. All rights reserved. 23
25 About Lumileds Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge. With a rich history of industry firsts, Lumileds is uniquely positioned to deliver lighting advancements well into the future by maintaining an unwavering focus on quality, innovation and reliability. To learn more about our portfolio of light engines, visit lumileds.com Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com DS203 LUXEON 3535L Product Datasheet Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided as is, and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data.
Multiple colors, a single focal length
Illumination LUXEON C Color Line Multiple colors, a single focal length The LUXEON C Color Line is an optically advanced portfolio of Color and White LEDs. Designed for flawless color mixing, LUXEON C
High flux for outdoor applications
General Illumination LUXEON R High flux for outdoor applications LUXEON R brings illumination grade LED light sources to outdoor and industrial lighting applications and makes it easier than ever to design
LUXEON TX Extreme efficacy that will transform your next market leading luminaire
LUXEON TX Extreme efficacy that will transform your next market leading luminaire Introduction LUXEON TX emitters are illumination grade LEDs designed to deliver high efficacy with high flux density to
LUXEON 5630 Mid-Power LEDs Illumination Portfolio
LUXEON 5630 Mid-Power LEDs Illumination Portfolio Introduction LUXEON 5630 delivers optimized performance in combination with quality of light needed for distributed light source applications. In addition
LUXEON S. High Flux Density
LUXEON S Optimized solution for applications requiring high flux and tight beam control Technical Datasheet DS80 LUXEON S High Flux Density Introduction The LUXEON S emitters deliver uniform beam intensity
LUXEON CoB with CrispWhite Technology Retail lighting that makes an impact
LUXEON CoB with CrispWhite Technology Retail lighting that makes an impact Introduction LUXEON CoB with CrispWhite Technology delivers the warm saturated colors of high 90 CRI solutions while creating
General Purpose White Portfolio
LUXEON Rebel General Purpose Portfolio High flux and color stability Technical Datasheet DS64 LUXEON Rebel General Purpose White Portfolio Introduction The LUXEON Rebel General Purpose White Portfolio
MP-1919 XNOVA Cube TM SMD LED
MP-1919 XNOVA Cube TM SMD LED Features: Table of Contents Technology Overview.... 2 Product Selection Table... 3 Operating Characteristics.. 4 Chromaticity Binning.... 5 Chromaticity Diagram.... 6 Characteristic
Cree XLamp XP-G LEDs Data Sheet
Cree XLamp XP-G LEDs Data Sheet The XLamp XP-G LED delivers unprecedented levels of light output and efficacy for a single die LED. The XLamp XP-G LED continues Cree s history of innovation in LEDs for
How To Understand And Understand The Design Of An Oxymoron Lamp
Technical Datasheet DS56 power light source LUXEON Rebel Introduction LUXEON Rebel is an ultra-compact, surface-mount, high-power LED that delivers elevated standards for light output, flux density and
Discontinued. LUXEON V Portable. power light source. Introduction
Preliminary Technical Datasheet DS40 power light source LUXEON V Portable Introduction LUXEON is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability
Features. Typical Applications G9. ProLight PEA2-3FVE 3W Warm White AC LED Technical Datasheet Version: 1.7 1 DS-0042
ProLight PEA2-3FVE 3W Warm White AC LED Technical Datasheet Version: 1.7 Features High Color rendering index Follow ANSI C78.788.2008 Chromaticity co-ordinates High flux per LED Good color uniformity Industry
2016 Mid Power LED. 2016 Mid Power Product Datasheet. Features: Table of Contents. Applications
2016 Mid Power LED Table of Contents Technology Overview.... 2 Product Selection Table... 3 Operating Characteristics.. 4 Chromaticity Diagram.... 5 Color Ranks.... 5 Features: High efficacy CRI Options:
Cree XLamp XR-E LED. Table of Contents. CLD-DS05 Rev 16B. Product family data sheet
Cree XLamp XR-E LED Product family data sheet CLD-DS05 Rev 16B Product Description The XLamp XR-E LED is leading the LED lighting revolution with its unprecedented lighting-class brightness, efficacy,
Cree XLamp MX-6 LEDs Data Sheet
Cree XLamp MX-6 LEDs Data Sheet The Cree XLamp MX-6 LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a flat-top PLCC package. The XLamp MX-6 LED continues Cree s
Cree XLamp MX-3S LEDs Data Sheet
Cree XLamp MX-3S LEDs Data Sheet The Cree XLamp MX-3S LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a high voltage, PLCC configuration. All members of the MX-family
LUXEON Rebel and LUXEON Rebel ES Color Portfolio
LUXEON Rebel and LUXEON Rebel ES Color Portfolio Illuminating your creativity Technical Datasheet DS68 LUXEON Rebel and LUXEON Rebel ES Color Portfolio Introduction With leading light output, color stability,
Bridgelux ES Array Series
Bridgelux ES Array Series Product Data Sheet Introduction The Bridgelux family of LED Array products delivers high performance, compact and cost-effective solidstate lighting solutions to serve the general
LUXEON Altilon. Functional solution for forward lighting systems AUTOMOTIVE
AUTOMOTIVE LUXEON Altilon Functional solution for forward lighting systems LUXEON Altilon delivers distinctive brilliant white light for your automotive forward lighting designs. LUXEON Altilon is designed
Available in white (2,600 K to 8,300 K CCT) Maximum drive current: 1000 ma. Wide viewing angle: 120. Electrically neutral thermal path
PRODUCT FAMILY DATA SHEET CLD-23 REV 3 Cree XLamp MX-6 LEDs PRODUCT DESCRIPTION The Cree XLamp MX-6 LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a flat-top PLCC
Product family data sheet
Cree XLamp MX-6 LEDs Product family data sheet CLD-DS23 Rev 3A Product Description The Cree XLamp MX-6 LED provides the proven lightingclass performance and reliability of Cree XLamp LEDs in a flat-top
Cree XLamp XP-G LEDs PRODUCT FAMILY DATA SHEET PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS CLD-DS20 REV 4
PRODUCT FAMILY DATA SHEET CLD-DS20 REV 4 Cree XLamp XP-G LEDs PRODUCT DESCRIPTION The XLamp XP-G LED delivers unprecedented levels of light output and efficacy for a single die LED. The XLamp XP-G LED
Edixeon S White Series Datasheet
Edixeon S White Series Datasheet Edixeon Series Features : Various colors More energy efficient than incandescent and most halogen lamps Low voltage operation Instant light Long operating life Copyright
Cree XLamp XR-C LEDs PRODUCT FAMILY DATA SHEET PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS CLD DS10 REV7
PRODUCT FAMILY DATA SHEET CLD DS1 REV7 Cree XLamp XR-C LEDs PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS WWW. CREE.COM/XLAMP The XLamp XP-E LED combines the proven lighting-class performance and reliability
WL-SWTC SMD White Top View Ceramic LED
A Dimensions: [mm] B Recommended land pattern: [mm] D Absolute Maximum Ratings (Ambient Temperature 25 C): Properties Test conditions Value Unit Power dissipation P Diss 2.52 W Peak Forward Current duty/10@1khz
SuperFlux LEDs. Leaded. Introduction. Features. Key Applications
SuperFlux LEDs Leaded This product is not RoHs compliant. For lead-free, use SuperFlux PB-Free in DS55. Introduction The popular through-hole package design allows lighting designers to reduce the number
LZC-00MC40. LedEngin, Inc. High Luminous Efficacy RGB LED Emitter. Key Features. Typical Applications. Description
Key Features High Luminous Efficacy RGB LED Emitter LZC-MC4 Ultra-bright, Ultra-compact 4W RGB LED Full spectrum of brilliant colors with superior color mixing Small high density foot print 9.mm x 9.mm
Edixeon S5 White Series Datasheet
Edixeon S5 White Series Datasheet Edixeon Series Features : Various colors for choice Low voltage operation Instant light Long operating life Reflow process compatible Copyright 2013 Edison Opto Corporation.
EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet 0805 Package Chip LED Preliminary
Feature RoHS compliant. This is a preliminary specification Chip LED package. intended for design purposes and Colorless clear resin. Wide viewing angle 130 o. subject to change without prior Brightness:
LXML-PWC2 Luxeon Rebel Starboard LED
LXML-PWC2 Luxeon Rebel Starboard LED Opulent Part Number: REBEL-STAR-ES-CW200 Opulent Starboard: MCPCB Luxeon Rebel LED: LXML-PWC2 Opulent YOUR GREEN PARTNER Features Excellent thermal conductivity Excellent
703-0148 InGaN / Sapphire White Water clear. Parameter Rating Unit
Package Dimensions: * All dimensions are in mm * Tolerance: ±.6mm unless otherwise noted. LED Chip Lens Colour Ant Part No. Material Colour Coordinates 73-148 InGaN / Sapphire White Water clear Absolute
N35L-U High Power LED
N35L-U High Power LED Introduction The N35L-U LED from SemiLEDs brings industry leading technology to the solid state lighting market with its high quality and performance. With a silicone lens, N35L-U
CHM-27 COB Arrays White LED
CHM-27 COB Arrays White LED Features: Table of Contents Technology Overview...2 Test Specifications...2 Chromaticity Bins...3 Product Ordering & Shipping Part Numbers...4 Product Typical Flux Range. 5
Bridgelux ES Rectangle Array Series
Bridgelux ES Rectangle Array Series Product Data Sheet DS24 BXRA-xxx0800, BXRA-xxx1200, BXRA-xxx2000 BXRA-40E0950, BXRA-40E1350, BXRA-40E2200 BXRA-xxC1100, BXRA-xxC1600, BXRA-xxC2600 Introduction The Bridgelux
5W HI-POWER LED SPECIFICATION
5W HI-POWER LED SPECIFICATION HPG8b-495xWHCx Drawn by Checked by Approved by RoHS Conformity DATE:2013/4/9 REV:A HUEY JANN High Power 5W LED is made of GaInN chips with precise package technique which
CLD-DS45 Rev 2A. Product family data sheet
Cree XLamp X-D White LEDs Product family data sheet CLD-DS45 Rev 2A PRODUCT DESCRIPTION The XLamp X-D is Cree s newest lighting class LED, bringing the next generation of performance and price to LED lighting
P2O LED. High Power LED PRODUCT DATASHEET. Introduction. RoHS Compliant
P2O LED High Power LED Introduction The P2O LEDs from SemiLEDs utilize innovative MvpLED technology which delivers superior levels of optical performance and reliability. Use of state of the art silicone
LUXEON III Star. power light source. Introduction
Technical Datasheet DS46 power light source LUXEON III Star Introduction LUXEON III is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages
T5050M-MCL1 High Power Mixing Color LED
PRODUCT DATASHEET T5050M-MCL1 High Power Mixing Color LED Introduction The T5050M-MCL1 LED from TSLC brings industry leading technology to the solid state lighting market with its high quality and performance.
P2N LED. High Power LED PRODUCT DATASHEET. Introduction. RoHS Compliant
PRODUCT DATASHEET P2N LED High Power LED Introduction The P2N LED brings industry leading technology to the solid state lighting market with its high quality and performance. With a silicone lens, P2N
3W RGB High Power LED
Features: Super high flux output and high luminance Designed for high current operation Low thermal resistance No UV Package Dimensions: Typical Applications Reading lights Portable flashlight Uplighters
EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Power LED 1W (Preliminary)
Technical Data Sheet High Power LED 1W (Preliminary) Features Feature of the device: small package with high efficiency Typical view angle: 150. Typical light flux output: 30 lm @ 350mA. ESD protection.
Data Sheet. Nationstar LED
Data Sheet Nationstar LED 1 Table of Contents General Informations:... 3 Electrical and Flux Characteristics... 3 Color Wavelength Diagram:... 6 Mechanical Dimensions:... 7 Electrical Connection:... 7
SURFACE MOUNT LED LAMP STANDARD BRIGHT 0606
PACKAGE DIMENSIONS 0.075 (1.9) 0.063 (1.6) 0.035 (0.9) TOP 0.047 (1.2) 0.012 (0.3) 0.032 [0.8] SIDE 0.043 [1.1] 1 3 0.020 [0.5] 2 4 BOTTOM CATHODE MASK 1 2 3 4 HER / AlGaAs Red / Yellow (for-34) Green
DOMINANT. Opto Technologies Innovating Illumination. 150 InGaN Warm White : NAF-BSG DATA SHEET : Primax TM. Features: Applications:
DATA SHEET : Primax TM 150 InGaN Warm White : NAF-BSG Primax TM Synonymous with function and performance, enter the Primax, the new era of high intensity illumination in LED. With its high flux output
SPEC NO: DSAJ8637 REV NO: V.6B DATE: JUL/01/2016 PAGE: 1 OF 5 APPROVED:
1.0X0.5mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APHHS1005ZGC Green Features 1.0mmX0.5mm SMD LED, 0.5mm thickness. Low power
SPECIFICATIONS FOR APPROVAL
CUSTOMER :. DATE : 2010. 12. 16. SPECIFICATIONS FOR APPROVAL PRODUCT NAME : Top View Type White SMD LED MODEL NAME : LEMWS59T80LZ00 APPROVAL REMARK APPENDIX Designed Checked Approved LG Innotek Co., Ltd.
50W EdiStar. Approved By Customer. Designer Checker Approval. Ultra High Power LED
Ultra High Power LED 50W EdiStar EdiStar Emitter Approved By Customer Designer Checker Approval Date:2006/12/04 Version:Preliminary V0.1 4F, No. 800, Chung-Cheng Rd, Chung-Ho, Taipei 235, Taiwan Tel: 886-2-8227-6996
C4246 120W COB Series
High Performance LED Module SemiLEDs C4246 120W COB is a high performance LED module with high thermal conductivity and reliability for demanding lighting applications. It is an easy to assemble light
Cree XLamp MT-G EasyWhite LEDs
ree XLamp MT-G EasyWhite LEDs PRODUT FAMILY DATA SHEET/ BINNING AND LABELING DOUMENT LD-DS36 REV 0 WWW.REE.OM/XLAMP PRODUT DESRIPTION The XLamp MT-G EasyWhite LED maximizes lumen density, eliminates chromaticity
DOMINANT. Opto Technologies Innovating Illumination. InGaN White S-Spice : SSW-SLD DATA SHEET: SpiceLED TM. Features: Applications:
DATA SHEET: SpiceLED TM SpiceLED TM Like spice, its diminutive size is a stark contrast to its standout performance in terms of brightness, durability and reliability. Despite being the smallest in size
and cathode, allowing them to be driven individually, this increasing flexibility in electrical layout.
ACULED VHL Standard White, Monochromatic and Multi-Colored Four-Chip LED Products DESIGN YOUR OWN! Custom DYO product line also available B R O C H U R E Scale 1:1 = 13 mm The ACULED VHL (Very High Lumen)
C1919 15W COB Series
High Performance LED Module SemiLEDs C1919 15W COB is a high performance LED module with high thermal conductivity and reliability for demanding lighting applications. It is an easy to assemble light source
Cree PLCC6 3 in 1 SMD LED CLY6C-FKC
Cree PLCC6 3 in 1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1323.005 PRODUCT DESCRIPTION This SMD LED features an IPx8 water resistant rating in a PLCC6 package. These high performance tricolor SMT LEDs
Surface Mount 905 nm Pulsed Semiconductor Lasers High Power Laser-Diode Family for Commercial Range Finding
Preliminary DATASHEET Photon Detection Surface Mount 5 nm Pulsed Semiconductor Lasers Near field profile Excelitas pulsed semiconductor laser produces very high peak optical pulses centered at a wavelength
Luxeon Emitter. power light source. Introduction
Technical Datasheet DS25 power light source Luxeon Emitter Introduction Luxeon is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages
Cree PLCC6 3 in 1 SMD LED SLV6A-FKB
Cree PLCC6 3 in 1 SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1320.001 PRODUCT DESCRIPTION These SMD LEDs are packaged in an industry standard PLCC6 package. These high performance tricolor SMT LEDs are designed
Data Sheet. ASMT-Mx00 Moonstone TM 1 W Power LED Light Source. Features. Description. Specifications. Applications
ASMT-M Moonstone TM 1 W Power LED Light Source Data Sheet Description The Moonstone TM 1W Power LED Light Source is a high performance energ efficient device which can handle high thermal and high driving
HL-A-3528H308W-S1-13. Description. Applications. Recommended Soldering. Package Dimensions
RoHS Specification Client Name: Client P/N: Factory P/N: HL-A-3528H308W-S1-13 OF-SMD3528WN Sending Date: Client approval Hong li approval Approval Audit Confirmation Approval Audit Confirmation 殷 小 平 王
Product family data sheet
Cree XLamp XP-E LEDs Product family data sheet CLD-DS18 Rev 19 Product Description The XLamp XP-E LED combines the proven lighting-class performance and reliability of the XLamp XR-E LED in a package with
Contents. 12. Lot Number 10. 13. Reel Packing Structure 11. 14. Precaution for Use 13. 15. Hazard Substance Analysis 14. 16. Revision History 18
Rev : 00 ISSUE NO : DATE OF ISSUE : 2009. 04. 10 S P E C I F I CATION MODEL : SLHNNWW629T1S0U0S0 [Rank : (S0), (U0), (S0)] HIGH POWER LED - SUNNIX6 CUSTOMER : CUSTOMER CHECKED CHECKED APPROVED SAMSUNG
Cree PLCC4 3 in 1 RGB SMD LED CLMVB-FKA
Cree PLCC4 3 in 1 RGB SMD LED PRODUCT FAMILY DATA SHEET CLD-CT1230.007 PRODUCT DESCRIPTION The full-color RGB LED offers a high-intensity light output and a wide viewing angle. The compact 2mm x 2mm package
B Recommended land pattern: [mm] 2013-09-10. SSt. SSt. SSt. HOe 2013-05-14 2013-04-10. SSt. SSt. SSt 2012-12-10. SSt 2012-11-05. HOe. SSt.
![B Recommended land pattern: [mm] 2013-09-10. SSt. SSt. SSt. HOe 2013-05-14 2013-04-10. SSt. SSt. SSt 2012-12-10. SSt 2012-11-05. HOe. SSt.](/thumbs/40/21198032.jpg "B Recommended land pattern: [mm] 2013-09-10. SSt. SSt. SSt. HOe 2013-05-14 2013-04-10. SSt. SSt. SSt 2012-12-10. SSt 2012-11-05. HOe. SSt.")
A Dimensions: [mm] B Recommended land pattern: [mm] D Absolute Maximum Ratings (Ambient Temperature 25 C): Properties Test conditions Value Unit Power dissipation P Diss 105 mw Peak Forward Current duty/10@1khz
CBT-90 TE Thermally Enhanced LED Chipset
CBT-90 TE Thermally Enhanced LED Chipset Features: Table of Contents Technology Overview...2 Test Specifications...2 Ordering Information...3 Monochrome Binning Structure...4 Large, monolithic chip with
1W High Power Purple LED Technical Data Sheet. Part No.: LL-HP60MUVA
1W High Power Purple LED Technical Data Sheet Part No.: LL-HP60MUVA Spec No.: HP60M Rev No.: V.2 Date: Aug./18/2009 Page: 1 OF 8 Features: Luckylight High power LED type. Lead frame type package (Heat
Gas Discharge Tube (GDT) Products CG5 and SL0902A Series. CG5 and SL0902A Series
Description Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Littelfuse Broadband Optimized SL0902A Series offers high surge ratings in a miniature package. Special design
0.45mm Height 0402 Package Pure Green Chip LED Technical Data Sheet. Part No.: LL-S160PGC-G5-1B
.45mm Height 42 Package Pure Green Chip LED Technical Data Sheet Part No.: LL-S16PGC-G5-1B Spec No.: S16 Rev No.: V.2 Date: Dec./6/25 Page: 1 OF 9 Features: Package in 8mm tape on 7" diameter reel. Compatible
CLA4607-085LF: Surface Mount Limiter Diode
DATA SHEET CLA4607-085LF: Surface Mount Limiter Diode Applications Low-loss, high-power limiters Receiver protectors Anode (Pin 1) Anode (Pin 3) Features Low thermal resistance: 55 C/W Typical threshold
HLMP-1600, HLMP-1601, HLMP-1620, HLMP-1621 HLMP-1640, HLMP-1641, HLMP-3600, HLMP-3601 HLMP-3650, HLMP-3651, HLMP-3680, HLMP-3681
HLMP-16, HLMP-161, HLMP-162, HLMP-1621 HLMP-16, HLMP-161, HLMP-36, HLMP-361 HLMP-365, HLMP-3651, HLMP-368, HLMP-3681 T 1 3 / (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps Data Sheet
Welcome to this presentation on Thermal Characteristics of LEDs, part of OSRAM Opto Semiconductors LED Fundamentals series.
Welcome to this presentation on Thermal Characteristics of LEDs, part of OSRAM Opto Semiconductors LED Fundamentals series. In this presentation we will look at the basics of thermal management in LED
Power SMD LED PLCC-2 Plus
Power SMD LED PLCC-2 Plus 2238 DESCRIPTION The VLMW51.. white LED in PLCC-2 plus package is an advanced product in terms of high luminous flux and low thermal resistance. In combination with the small
DISCONTINUED (1998) FBR46 SERIES. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES RoHS compliant FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment.
PDS5100H. Product Summary. Features and Benefits. Mechanical Data. Description and Applications. Ordering Information (Note 5) Marking Information
Green 5A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER POWERDI 5 Product Summary I F V R V F MAX (V) I R MAX (ma) (V) (A) @ +25 C @ +25 C 1 5..71.35 Description and Applications This Schottky Barrier Rectifier
The Latest in LED Lighting Test Methods and Standards. Jianzhong Jiao, Ph.D. OSRAM Opto Semiconductors Inc.
The Latest in LED Lighting Test Methods and Standards Jianzhong Jiao, Ph.D. OSRAM Opto Semiconductors Inc. EPA Energy Star Products Partner Meeting Oct. 22, 2012 2 Outline Introduction Updates for LED
No. 3, Gongye E. 3rd Road, Hsinchu Science Park, Hsinchu 30075, Taiwan TEL:886-3-565-8800. Lextar.com 50W-100W COB LED. Updated on 2012/010/11
Lextar.com 50W-100W COB LED Updated on 2012/010/11 Approval Sheet 50W COB LED Product Specification Product COB Part Number PB50H01 Customer Issue Date 2012/10 Feature LED COB Dice Technology : InGaN High
SM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to from damage due to
LUXEON LEDs. Circuit Design and Layout Practices to Minimize Electrical Stress. Introduction. Scope LED PORTFOLIO
LED PORTFOLIO LUXEON LEDs Circuit Design and Layout Practices to Minimize Electrical Stress Introduction LED circuits operating in the real world can be subjected to various abnormal electrical overstress
Wurth Electronics Midcom Policy Statement on RoHS Compliance And Lead-Free Products
Wurth Electronics Midcom Policy Statement on RoHS Compliance And Lead-Free Products General Environmental Policy Wurth Electronics Midcom is committed to the manufacture of environmentally-friendly products
SLLP-5630-150-G PRODUCT DATASHEET. RoHS Compliant
PRODUCT DATASHEET SLLP-5630-150-G Table of Contents Features... 1 Applications 1 Characteristics.. 1 Typical Electro optical Characteristics Curves... 3 Mechanical Dimensions... 4 Carrier Tape Dimensions.....
Middle Power LM231A LM231B LM561A LM561B LM362A
LED packages High Power LED Lighting LH351Z (2W) High efficacy 2W class high power LEDs makes the LH351Z suitable for high brightness applications. Highest efficacy among 2W high power LEDs - 143 lm/w
1SMB59xxBT3G Series, SZ1SMB59xxT3G Series. 3 Watt Plastic Surface Mount Zener Voltage Regulators
9xxBTG Series, SZ9xxTG Series Watt Plastic Surface Mount Zener Voltage Regulators This complete new line of W Zener diodes offers the following advantages. Features Zener Voltage Range. V to V ESD Rating
Agilent T-1 3 / 4 (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps Data Sheet
Agilent T-1 3 / (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps Data Sheet HLMP-16, HLMP-161, HLMP-162, HLMP-1621 HLMP-16, HLMP-161, HLMP-36, HLMP-361 HLMP-365, HLMP-3651, HLMP-36, HLMP-361
High Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW
High Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW DESCRIPTION is an infrared, 940 nm side looking emitting diode in GaAlAs multi quantum well (MQW) technology with high radiant power and high speed,
Ultrabright White LED, Ø 3 mm
Ultrabright White LED, Ø 3 mm DESCRIPTION The VLHW41 series is a clear, untinted 3 mm LED for high end applications where supreme luminous intensity is required. These lamps utilize the highly developed
Features. Applications. Truth Table. Close
ASSR-8, ASSR-9 and ASSR-8 Form A, Solid State Relay (Photo MOSFET) (0V/0.A/0Ω) Data Sheet Description The ASSR-XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically
Standard 0603 SMD LED
TLMS, TLMO, TLMY, TLMG, TLMP, TLMB Standard 63 SMD LED DESCRIPTION 8562 The new 63 LED series have been designed in the smallest SMD package. This innovative 63 LED technology opens the way to smaller
How To Test A Sidactor Series For A Power Supply
SDP Series - SOT23-5 RoHS Pb e3 Description This new SIDACtor series is targeted for the tertiary or line driver side protection position for VDSL2+, ADSL2 applications and general I/O protection functions.
IR Edixeon Emitter. 1W Edixeon
High Power LED 1W Edixeon IR Edixeon Emitter Date:2006/06/01 Version:2.0 Device No. : 3-RD-01-E0009 Believe SRL Via Lago di Trasimeno, 21 - Schio (VI) - Italy TEL: +39/0445/579035 FAX: +39/0445/575708
Silicon PIN Photodiode
VEMD940F Silicon PIN Photodiode DESCRIPTION VEMD940F is a high speed and high sensitive PIN photodiode in a miniature side looking, surface mount package (SMD) with daylight blocking filter. Filter is
1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES
POWER RELAY 1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES RoHS compliant FEATURES Ultra slim type with 5 mm thickness Good for high density mounting Low power consumption and high sensitivity Nominal
Data Sheet. HLMP-4700, HLMP-4719, HLMP-4740 HLMP-1700, HLMP-1719, HLMP-1790 T-1 3 / 4 (5 mm), T-1 (3 mm), Low Current LED Lamps. Description.
HLMP-4700, HLMP-4719, HLMP-4740 HLMP-1700, HLMP-1719, HLMP-1790 T-1 3 / 4 (5 mm), T-1 (3 mm), Low Current LED Lamps Data Sheet Description These tinted diffused LED lamps are designed and optimized specifically
CBT-140 White LEDs. CBT-140 Product Datasheet. Features: Table of Contents. Applications
CBT-140 White LEDs Features: Table of Contents Technology Overview...2 Test Specifications...2 Binning Structure...3 Chromaticity Bins...4 Ordering Inforamtion...6 Bin Kit Order Codes...7 Shipping and
Cree PLCC6 3-in-1 SMD LED CLP6C-FKB
PRODUCT FAMILY DATA SHEET CLD-CT933.002 Cree PLCC6 3-in-1 SMD LED PRODUCT DESCRIPTION Cree PLCC full-color LEDs offer highintensity light output and a wide viewing angle in an industry-standard package.
Apples & Pears, a CELMA guiding paper: Why standardisation of performance criteria for LED luminaires is important
Apples & Pears, a CELMA guiding paper: Why standardisation of performance criteria for LED luminaires is important Enabling like-for-like comparison of LED luminaire performance starts with published initial
WE-LF SMD Common Mode Power Line Choke
A Dimensions: [mm] B Recommended hole pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Inductance 10 khz/ 0.1 ma L 2x 6.8 mh ±30% Rated current @ 70 C I R 1.0 A max. DC
1 POLE - 5A SLIM POWER RELAY
POWER RELAY POLE - A SLIM POWER RELAY FTR-MY Series RoHS compliant FEATURES Width mm, height mm,(% smaller than NY series) area mm, super slim, low power, compact and light weight.gr. Nominal power: mw
Antenna Part Number: FR05-S1-R-0-105
Fractus EZConnect Zigbee, RFID, ISM868/9 Chip Antenna Antenna Part Number: FR5-S1-R--15 This product is protected by at least the following patents PAT. US 7,148,85, US 7,22,822 and other domestic and
Flexible LED system approach
FastFlex Gen3 Outstanding performance while enabling OEM optical differentiation Flexible LED system approach Outdoor LED lighting Outstanding performance while enabling OEM optical differentiation in
Silicon NPN Phototransistor
Silicon NPN Phototransistor 16758-1 VEMT252X1 DESCRIPTION VEMT25X1 VEMT25X1 series are silicon NPN epitaxial planar phototransistors in a miniature dome lens, clear epoxy package for surface mounting.
DISCONTINUED (1998) MINIATURE RELAY 1 POLE 1 to 2 A (FOR SIGNAL SWITCHING) FBR211 SERIES. RoHS compliant
MINIATURE RELAY POLE to 2 A (FOR SIGNAL SWITCHING) FBR2 SERIES RoHS compliant FEATURES 2 A maximum carrying current Capable of 2 A maximum continuous carrying current in the contact Superior reliability