Vertigo Rod Hangers. Vertigo PRODUCT INFORMATION. SECTION CONTENTS Page No. PRODUCT DESCRIPTION GENERAL APPLICATIONS AND USES FEATURES AND BENEFITS

Transcription

1 Vrtigo Rod Hangrs PRODUCT DESCRIPTION Vrtigo is an all stl thradd fastning systm for suspnding stl thradd rod vrtically ovrhad in pip hanging, fir protction, lctrical conduit and cabltray applications. Vrtigo ar availabl in thr vrsions which can b installd in a varity of bas matrials including stl purlins, bar joists and bams, wood fram columns and bams, as wll as concrt cilings, bams and columns. Stl thradd rods in 1/, and diamtrs can b vrtically suspndd with Vrtigo. In wood and stl bas matrials, Vrtigo is also offrd in a sid mount styl for latral installation of 1/ and diamtr stl thradd rods onto joists, columns and ovrhad mmbrs. For all stl and wood Vrtigo fastnrs, a univrsal Vrtigo Sockt Drivr is rcommndd to provid propr installation with a scrw gun or hammr drill. Concrt Vrtigo fastnrs should b installd with th appropriat siz standard driv sockts and adjustabl torqu, battry powrd scrw gun or hammr drill. Vrtigo SECTION CONTENTS Pag No. Gnral Information... 1 Installation Spcifications... Matrial Spcifications... Prformanc Data... Ordring Information... 7 Stl Vrtigo GENERAL APPLICATIONS AND USES Hanging Pip and Sprinklr Systms Lighting Systms and Ovrhad Utilitis Suspndd Cilings Suspnding Conduit and Cabl Trays HVAC Ductwork and Strut Channls ing Scurity Equipmnt Wood Vrtigo FEATURES AND BENEFITS + On systm for all rod hanging applications in stl, wood and concrt + Eas and spd of ovrhad installation + Lowr inplac cost, whn compard to bam clamps, lag bolts and dropins + Stl and wood Vrtigo can b installd with a scrw gun or hammr drill + Concrt Vrtigo can b installd with an adjustabl torqu, battry powrd scrw gun or hammr drill + Sid mount vrsions availabl for stl and wood Vrtigo + Th univrsal sockt can b usd for th stl and wood Vrtigo APPROVALS AND LISTINGS FM Approvals (FM) (s listing for applicabl sizs and typs). Pip Hangrs componnts for automatic sprinklr systms Fil No. JI Undrwritrs Laboratory (UL) (s listing for applicabl sizs and typs). Pip Hangrs Fil No. EX 189 Luminair Fil No. E69 GUIDE SPECIFICATIONS CSI Divisions: Concrt Anchors, PostInstalld Concrt Anchors, Mtal Fastnings and Wood, Plastic, and Composit Fastnings. Rod Hangrs shall b Vrtigo anchors as supplid by Powrs Fastnrs, Inc., Brwstr, NY. Concrt Vrtigo (WdgBolt OT) ANCHOR MATERIALS Zinc Platd Carbon Stl ANCHOR SIZE RANGE (TYP.) 1/ to for Stl 1/ to for Wood 1/ to for Concrt SUITABLE BASE MATERIALS Stl Purlins and Bams Wood and Timbr NormalWight concrt Structural Lightwight concrt Hollow Cor Concrt Plank Powrs USA: (800) 5 Canada: (905) or (51)

2 Vrtigo installation SPECIFICATIONS Stl Vrtigo Point Styl # #5 Slf Drilling Rang 0.06 (0 gaug) (/16 ) (/16 ) ( ) Scrw Siz (UNC) 0 thrad 0 thrad Root Diamtr () 1/6 1/6 Thrad Lngth () 1/16 (1 scrw) 1/ (1 scrw) Flang Thicknss () 1/16 1/16 Drill Spd (RPM) Install with univrsal stl and wood sockt. Wood Vrtigo Scrw Siz 1/ Thrad Forming 5/16 Thrad Forming Prdrill Diamtr () (if rquird) 1/8 1/8 Point Styl Typ 17 Typ 17 Root Diamtr () /16 7/ Thrad Lngth () Scrw lngth lss 5/16 Scrw lngth lss 5/16 Flang Thicknss () 1/16 1/16 Install with univrsal stl and wood sockt. Vrtigo Couplings (Stl & Wood) Scrw Siz 1/ 1/ Coupling Siz and Typ Vrtical Vrtical Vrtical Sid Sid Thrad Siz (UNC) Thrad Dpth () 5/8 (through) 5/8 (through) Width (flat to flat) () 5/8 5/8 5/8 5/8 5/8 Hight () 1/16 1/16 1/16 1/16 1/16 Concrt Vrtigo (WdgBolt OT) /Anchor Siz 1/ ANSI Drill Bit () 1/ 1/ Ovrall Scrw Shank Lngth 11/ 1 / Anchor Thrad Lngth () 11/8 1 Root Diamtr () 15/6 15/6 /6 Coupling / Washr Hight () 7/6 9/16 5/6 Intgral Washr O.D. () 1/6 9/6 1/ Coupling Thrad Siz (UNC) Coupling Thrad Dpth () / Sockt Drivr Siz () 11/16 Install with univrsal stl and wood sockt. Installation Guidlins Whn installing Vrtigo fastnrs, y protction should b worn as a safty prcaution. If prdrilling is rquird (crtain typs of wood truss/wood joist and all concrt bas matrials), slct th rcommndd drill bit typ and diamtr. For Concrt Vrtigo only, drill to th appropriat mbdmnt dpth, adding at last on diamtr (1/ to ) to th drilling dpth to prvnt th tip of th fastnr from running into a dad nd at th rar of th anchor hol. Concrt Slct th appropriat sockt drivr for th anchor siz and typ to b installd and mount into chuck of installation tool. Insrt th Vrtigo fastnr into th sockt drivr, and install prpndicular to th bas matrial surfac. Driv th fastnr with a smooth stady motion until th coupling is firmly satd against th surfac of th bas matrial. Thrad th appropriat Stl diamtr stl thradd rod or thradd bolt into th coupling. Th thradd rod or bolt should fully ngag th thrad lngth of th coupling on a vrtical mount fastnr. Th thradd rod or thradd portion of th bolt can pass through coupling of a sid Wood mount fastnr. For UL and FM listings for Pip Hangrs, Stl Vrtigo should b installd with a rtaining nut. Matrial SPECIFICATIONS Stl and Wood Vrtigo Componnt Componnt Matrial Scrw Body AISI (Cas Hardnd) Coupling AISI (Cas Hardnd) Zinc Plating ASTM B6, SC1, Typ III (F/Zn5) Concrt Vrtigo (WdgBolt OT) Componnt Componnt Matrial Anchor Body Cas Hardnd 10B1 Carbon Stl Zinc Plating ASTM B6, SC1, Typ III (F/Zn 5) Canada: (905) or (51) 6116 Powrs USA: (800) 5

3 Vrtigo Prformanc Data Stl Vrtigo Ultimat Tnsion Load Capacitis whn Installd in Minimum ASTM A 6 Stl (Bams) and ASTM A 57 Stl (Purlins) 1, 1/ (6.) Dirction Vrtical Scrw Shank Siz and Lngth 0 x 1 (w/nut) Vrtical 0 x (1.8) Sid 0 x 1 (w/nut) Vrtical 0 x 1 (w/nut) Sid 0 x 1 (w/nut) Vrtical 0 x 1 05 (1.8) Sid 0 x 1 05 (1.8) Vrtical 0 x (w/nut) Vrtical 10 x 1 95 (.0 Vrtical 10 x 1 (w/nut) (.8) 60 (.8) 60 (.8) 710 (.) Minimum Stl Gaug (Thicknss) (.) 985 (.) 985 (.) 90 (.1) ,160 (5.) 1,160 (5.) 1,160 (5.) For Stl Vrtigo loadd prpndicular to thradd rod (shar) th ultimat load capacity for th anchor is 1,965 lbs in nominal 0 gag stl (0.06 ) / ,05 (1.),05 (1.) 1,965 (8.8),80 (1.8) 1/ ,00 (.7) 5,00 (.7) Wood Vrtigo Ultimat Tnsion Load Capacitis whn Installd in Wood Bas Matrials (Structural Wood and Timbr) 1, 1/ (6.) Dirction Scrw Shank Siz and Lngth Vrtical 1/ x 1 Sid 1/ x Vrtical 1/ x 1 Sid 1/ x 1 Vrtical 1/ x Sid 1/ x Vrtical 1/ x Vrtical 1/ x Vrtical 5/16 x Sid x Vrtical 5/16" x " Embdmnt Dpth 1 (5.) 1 (5.) 1 (5.) (76.) (6.5) (6.5) (6.5) Fir 685 (.1) 685 (.1) 685 (.1) 1,800,075 (9.),075 (9.),670 (1.0) 1,50 (6.5),670 (1.0) Wood Mmbr (Typ) Pin 1. Truss/joist manufacturrs may rquir prdrilld hols with wood dpnding on th location of th anchor installation. Consult with th truss/joist manufacturr for dtails.. Wood Vrtigo ar rcommndd to b installd with th Univrsal Stl & Wood Nut Drivr. 1,800,110 (1.0) 1,50 (6.9),110 (1.0) Spruc 1,800,110 (1.0) 1,80 (6.),110 (1.0) Powrs USA: (800) 5 Canada: (905) or (51)

4 Vrtigo Prformanc Data Concrt Vrtigo Ultimat Load Capacitis whn Installd in NormalWight Concrt 1, 1/ (6.) Dirction Scrw Shank Siz and Lngth ANSI Drill Bit Diamtr dbit Vrtical 1/ x 11/ 1/ Vrtical 1/ x 1 1/ Vrtical x / Embd. Dpth h v Minimum Concrt Comprssiv Strngth (f c),000 psi (1.8 MPa),000 psi (0.7 MPa) 6,000 psi (1. MPa) 1. Th valus listd abov ar ultimat load capacitis which should b rducd by a minimum safty factor of.0 or gratr to dtrmin th allowabl working load.. Linar intrpolation may b usd to dtrmin ultimat loads for intrmdiat comprssiv strngths. 11/ (1.8) 1 / Tnsion 1,90 (6.) 1,760 (7.9) 5,0 (.9) Shar 1,810,580 (11.6) 5,50 (.6) Tnsion 1,950 (8.8),595 (11.7) 6,050 (7.) Concrt Vrtigo Ultimat Load Capacitis whn Installd Through Mtal Dck into Structural Lightwight Concrt 1,,, d 1/ (6.) Embdmnt Dpth h v 11/ (1.8) 1 / Shar,0 (11.0),60 (11.9) 6,0 (8.5) Tnsion,070 (9.),770 (1.5) 8,60 (8.8) Lightwight Concrt Ovr Minimum 0 Ga. Mtal Dck f c,000 psi (0.7 MPa) Minimum Wid Dck 1. Th valus listd abov ar ultimat and allowabl load capacitis for Vrtigo rod hangrs installd in sandlightwight concrt.. Th mtal dck shall b minimum No. 0 gaug thick stl [0.05inch bas mtal thicknss (0.89 mm)] conforming to ASTM A 65/ A 65M.. Th valus listd abov ar ultimat load capacitis which should b rducd by a minimum safty factor of.0 or gratr to dtrmin th allowabl working load.. Th tabulatd load valus ar for anchors installd with a minimum flut dg distanc of 1inch. Tnsion Load at 5 Concrt Vrtigo Ultimat Tnsion Load Capacitis whn Installd in Hollow Cor Concrt Plank 1, 1/ (6.) Dirction Scrw Shank Siz and Lngth ANSI Drill Bit Diamtr d bit Vrtical 1/ x 11/ 1/ Vrtical 1/ x 1 1/ Vrtical x / 800 (.6) 1,780,880 (17.5) Embdmnt Dpth h v 11/ (1.8) Cntr of Wb,775 (1.) 1,10 (5.1),90 (1.1) Shar,570 (11.6),700 (1.) 7,10 (.0) Cntr of Cor 1. Tabulatd load valus ar for anchors installd in 8inchthick hollow cor plank with minimum comprssiv strngth of 5,000 psi at th tim of installation. Th x 6 normalwight concrt mmbrs faturs includ 1 covr abov and blow cors and a minimum wb thicknss of 1.. Th valus listd abov ar ultimat load capacitis which should b rducd by a minimum safty factor of.0 or gratr to dtrmin th allowabl working load. 1 /,700 (16.5) 8,0 (6.7) 1,90 (8.5),570 (11.),80 (15.5) Canada: (905) or (51) 6116 Powrs USA: (800) 5

5 Vrtigo Prformanc Data Stl Vrtigo Ultimat Load Capacitis for Factory Mutual (FM Global) and Undrwritr s Laboratoris (UL) Listings for Pip Hangrs 1 Wood Vrtigo Ultimat Load Capacitis for Factory Mutual (FM Global) and Undrwritr s Laboratoris (UL) Listings for Pip Hangrs 1 Dirction Dirction Scrw Shank Siz and Lngth Scrw Shank Siz and Lngth Point Styl Embdmnt Dpth Maximum Pip Siz UL Minimum Stl Thicknss 0.50 (6.) UL Maximum Pip Siz UL Tst Load UL Tst Load 7165 Vrtical 1/ x (76.) (.7) 7170 Sid 1/ x (76.) (.7) Vrtical 1/ x (76.) (76.) (.7) Vrtical 1/ x (76.) (.7) 716 Vrtical 5/16 x (6.5) 7156 Sid 5/16 x (6.5) 1. Wood Vrtigo anchors ar rcommndd to b installd with th Univrsal Stl & Wood Nut Drivr. No prdrilling was don in th wood bas matrials. FM Minimum Stl Thicknss (.) (.) (.) (.) (.) (.) (.) 0.50 (6.) 7158 Vrtical 0 x 1 # 718 Sid 0 x 1 # 7160 Vrtical 0 x 1 # 7186 Sid 0 x 1 # 715 Vrtical 10 x 1 # Sid 0 x # 701 Sid 10 x 1 # ,050 Vrtical 10 x 1 #5 (0.) (18.) 1. Stl Vrtigo anchors ar rcommndd to b installd with th Univrsal Stl & Wood Nut Drivr. For UL and FM listings, Stl Vrtigo must b installd with a rtaining nut. FM Maximum Pip Siz FM Tst Load 1,75 FM Tst Load 1,75 1,75 1,75 1,75 1,75 1,75 1,75,800 (17.1) Concrt Vrtigo Ultimat Load Capacitis for Factory Mutual (FM Global) Listings for Pip Hangrs 1 Dirction Scrw Shank Siz and Lngth ANSI Drill Bit Diamtr d bit Embdmnt Dpth FM Maximum Pip Siz FM Tst Load 717 Vrtical 1/ x 1 1/ 1 1, Vrtical x / /,800 (0.) (17.1) 1. Tabulatd load valus ar for anchors installd in 8 inch thick hollow cor plank with minimum comprssiv strngth of,000 psi at th tim of installation. Th x 6 normalwight concrt Powrs USA: (800) 5 Canada: (905) or (51)

6 Vrtigo Prformanc Data Stl Vrtigo Ultimat Load Capacitis for Undrwritr s Laboratoris (UL) Listings Luminair 1 Catalog Numbr Anchor Siz/Rod Dia. In. Dirction Scrw Shank Siz and Lngth Point Styl ing Surfac / Vrtical 0 x 1 # 16 Gaug Stl Vrtical 0 x # 16 Gaug Stl Vrtical 0 x 1 # 16 Gaug Stl Vrtical 0 x 1 # 16 Gaug Stl / Vrtical 0 x 1 # 16 Gaug Stl / Sid 0 x 1 # 16 Gaug Stl Sid 0 x 1 # 16 Gaug Stl Sid 0 x 1 # 16 Gaug Stl Sid 0 x # 16 Gaug Stl / Vrtical 0 x 1 # Gaug Stl / Vrtical 0 x # Gaug Stl Vrtical 0 x 1 # Gaug Stl Vrtical 0 x 1 # Gaug Stl Vrtical 0 x 1 # Gaug Stl / Sid 0 x 1 # Gaug Stl Sid 0 x 1 # Gaug Stl Sid 0 x 1 # Gaug Stl Sid 0 x # Gaug Stl 5 1. Stl Vrtigo anchors ar rcommndd to b installd with th Univrsal Stl & Wood Nut Drivr. For UL Luminair listing, Stl Vrtigo dos not rquir a rtaining nut. UL Tst Load (lb.) 6 Canada: (905) or (51) 6116 Powrs USA: (800) 5

7 Vrtigo ordring information Stl Vrtical Hangr (# for Purlins, #5 for Bams) Scrw Shank Siz and Lngth Point Styl Slf Drilling Rang / 1/ 0 x 1 # / 0 x # 0.06 (0 gaug) to / 0 x 1 (w/nut) # / 0 x 1 (w/nut) # (/16 ) / 0 x 1 (w/nut) # 715 1/ 1 0 x 1 # x 1 (w/nut) # (/16 ) to ( ) x 1 (w/nut) #5 Stl Sid Hangr (# for Purlins, #5 for Bams) Scrw Shank Siz and Lngth Point Styl Slf Drilling Rang 718 1/ 1/ 0 x 1 # / 0 x 1 (w/nut) # (0 gaug) to / 0 x 1 (w/nut) # / 0 x (w/nut) # (/16 ) 700 1/ 1 0 x 1 # (/16 ) to ( ) x 1 (w/nut) # Wood Vrtical Hangr Scrw Shank Siz and Lngth Point Styl PrDrill Diamtr (If Rquird) 716 1/ 1/ x Typ / x 1 Typ / x Typ / x Typ 17 1/ / x Typ /16 x Typ /16 x Typ 17 Wood Sid Hangr Scrw Shank Siz and Lngth Point Styl PrDrill Diamtr (If Rquird) / 1/ x 1 Typ / x 1 Typ 17 1/ / x Typ /16 x Typ 17 Concrt Vrtical Hangr Scrw Shank Siz and Lngth Thrad Styl PrDrill Diamtr (If Rquird) / 1/ x 11/ WdgBolt OT 1/ ANSI 717 1/ x 1 WdgBolt OT 1/ ANSI / x / WdgBolt OT ANSI Driv Sockts and Pol Tool Dscription RPM Pol Tool (includs thr Jaw Chuck) N/A Univrsal Stl & Wood Sockt (Rd) 500 to 1500 RPM / Concrt Sockt (Blu) Concrt Sockt (Blu) Concrt Sockt (Blu) 5 5 Concrt Vrtigo Installation Accssoris 586 Dscription Vrtigo Installation Kit: 1/ and Concrt Driv Sockts (Blu) Univrsal Stl & Wood Sockt (Rd) (Slv Assmbly (sam as Cat# 587) Maximum Bit Lngth 6 1 / 587 Slv Assmbly (5/ ) 6 1 Dscription Usabl Lngth Tub Wt./ / x 6 Hx Shank SDS Drill Bit 1 01 Powrs Fastnrs, Inc. All Rights Rsrvd. Vrtigo is a rgistrd tradmark of Powrs Fastnrs, Inc. For th most currnt product information plas visit Powrs USA: (800) 5 Canada: (905) or (51)