Spray Guns Cup Systems Breathing Protection Filter Technology Accessories. Spray Guns

Transcription

1 Spray Guns

2 SATAjet 5000 B RP /HVLP SATAjet 5000 B RP (DIGITAL) Inlet pressure Field of application: 0.5 bar 2.4 bar Compliant: max. 2.0 bar Air consumption at 2.0 bar: 290 Nl/min Spray distance Field of application: 10 cm 21 cm Recommended: 17 cm - 21 cm Nozzle 1,0 1,1 1,2 1,2 W 1,3 1,4 1,6 1,8 2,0 2,5 Standard with 0.6 l QCC reusable plastic cup, without swivel joint Art. No Standard with 0.6 l QCC reusable plastic cup, with swivel joint Art. No Standard with RPS disposable cup 0.3 l / 0.6 l / 0.9 l (each 1x) with swivel joint Art. No Nozzle 1,0 1,1 1,2 1,2 W 1,3 1,4 1,6 1,8 2,0 2,5 DIGITAL with 0.6 l QCC PVC reusable cup with swivel joint Art. No DIGITAL with RPS disposable cup 0.3 l / 0.6 l / 0.9 l (each 1x) with swivel joint Art. No Art. No SATAjet 5000 B HVLP (DIGITAL) 12 Inlet pressure Field of application: 0.5 bar 2.4 bar HVLP: max. 2.0 bar Air consumption at 2.0 bar: 430 Nl/min Spray distance Field of application: 10 cm 21 cm Recommended: 10 cm - 15 cm Nozzle 1,0 1,2 WSB 1,3 1,4 1,5 1,7 1,9 2,2 Standard with 0.6 l QCC reusable plastic cup, without swivel joint Art. No Standard with 0.6 l QCC reusable plastic cup, with swivel joint Art. No Standard with RPS disposable cup 0.3 l / 0.6 l / 0.9 l (each 1x) with swivel joint Art. No Nozzle 1,0 1,2 WSB 1,3 1,4 1,5 1,7 1,9 2,2 DIGITAL with 0.6 l QCC PVC reusable cup with swivel joint Art. No DIGITAL with RPS disposable cup 0.3 l / 0.6 l / 0.9 l (each 1x) with swivel joint Art. No Art. No

3 Spare Parts SATAjet 5000 B Spray Guns Cup Systems Breathing Protection Filter Technology Accessories 1826 Anti-drip device (packing unit 4 pieces) 3988 Paint strainer, 300 µm (packing unit 10 pieces) Paint needle packing Swivel joint l QCC reusable plastic cup, cpl Screw-on lid for 0.6 l PVC cup with drip-catching ring and non-drip device Paint strainer, 300 µm (packing unit 100 pieces) Paint strainer, 300 µm (packing unit 500 pieces) Air piston rod PVC insert for paint spray guns with QCC cup connection Sealing (packing unit 3 pieces) for spindle Seal retainer, cpl Pressure spring (3 pieces) for paint needle and air piston Air piston head (packing unit 3 pieces) Air connection piece 1/4" (male thread) Sealing element (packing unit 5 pieces) for fluid tip Locking screw (packing unit 3 pieces) for air micrometer CCS-Clips, green, blue, red, black (packing unit 4 pieces) Air distribution ring (packing unit 3 pieces) Trigger kit Seal retainer with sleeve Trigger sleeve kit Air micrometer Material flow control with counter nut Control knob with screw (each 2 pieces) Air connection with sleeve Sealing ring (packing unit 5 pieces) Swivel joint with seal retainer and sleeve Spindle, cpl., for round / flat spray control Battery kit (5x) (5x) (3x) Tool kit Universal spanner Combi tool Cleaning brush CCS clips Paint strainer Extraction tool 3988 (10x) (100x) (500x) (4x) (3x) (3x) (3x) Repair kit Air piston service unit Sealing kit (3x)

4 SATAjet 4000 B RP /HVLP SATAjet 4000 B RP (DIGITAL) Inlet pressure: 2.0 bar 2.2 bar Air consumption at 2.0 bar: 285 Nl/min Spray distance: 17 cm 21 cm Nozzle 1,0 1,1 1,2 1,2 W 1,3 1,4 1,6 1,8 2,0 2,5 Standard with 0.6 l QCC reusable plastic cup, without swivel joint Art. No Standard with 0.6 l QCC reusable plastic cup, with swivel joint Art. No Standard with RPS disposable cup 0.3 l / 0.6 l / 0.9 l (each 1x) with swivel joint Art. No Nozzle 1,0 1,1 1,2 1,2 W 1,3 1,4 1,6 1,8 2,0 2,5 DIGITAL with 0.6 l QCC PVC reusable cup with swivel joint Art. No DIGITAL with RPS disposable cup 0.3 l / 0.6 l / 0.9 l (each 1x) with swivel joint Art. No Nozzle 1,0 1,1 1,2 1,2 W 1,3 1,4 1,6 1,8 2,0 2,5 Art. No SATAjet 4000 B HVLP (DIGITAL) Inlet pressure: 2.0 bar Air consumption at 2.0 bar: 430 Nl/min Spray distance: 10 cm 15 cm Nozzle 1,0 1,2 WSB 1,3 1,4 1,5 1,7 1,9 2,2 Standard with 0.6 l QCC reusable plastic cup, without swivel joint Art. No Standard with 0.6 l QCC reusable plastic cup, with swivel joint Art. No Standard with RPS disposable cup 0.3 l / 0.6 l / 0.9 l (each 1x) with swivel joint Art. No Nozzle 1,0 1,2 WSB 1,3 1,4 1,5 1,7 1,9 2,2 DIGITAL with 0.6 l QCC PVC reusable cup with swivel joint Art. No DIGITAL with RPS disposable cup 0.3 l / 0.6 l / 0.9 l (each 1x) with swivel joint Art. No Nozzle 1,0 1,2 WSB 1,3 1,4 1,5 1,7 1,9 2,2 Art. No

5 Spare Parts SATAjet 4000 B 1826 Anti-drip device (packing unit 4 pieces) 3988 Paint strainer, 300 µm (packing unit 10 pieces) Paint needle packing Swivel joint l QCC reusable plastic cup, cpl Screw-on lid for 0.6 l PVC cup with drip-catching ring and non-drip device Paint strainer, 300 µm (packing unit 100 pieces) Paint strainer, 300 µm (packing unit 500 pieces) Air piston rod Sealing (packing unit 3 pieces) for spindle Seal retainer, cpl Pressure spring (3 pieces) for paint needle and air piston Adjustment screw (packing unit 3 pieces) for air micrometer Air piston head (packing unit 3 pieces) Air connection piece 1/4" (male thread) Sealing element (packing unit 5 pieces) for fluid tip CCS Clips, green, blue, red, black (packing unit 4 pieces) Spindle for round/flat spray control >Quarter Turn< Air distribution ring (packing unit 3 pieces) Trigger kit Seal retainer with sleeve Battery kit Trigger sleeve kit Air micrometer Material flow control with counter nut Control knob with screw (each 2 pieces) Air connection with sleeve Sealing ring (packing unit 5 pieces) Seal retainer with sleeve and swivel joint Tool kit Universal spanner Combi tool Cleaning brush CCS clips Paint strainer Extraction tool Repair kit Air piston service unit Sealing kit 15

6 SATAjet 3000 K RP /HVLP SATAjet 3000 K RP Inlet pressure: 2.5 bar 3.0 bar Air consumption at 2.5 bar: 430 Nl/min Spray distance: 17 cm 21 cm Material connection: 3/8" male thread Nozzle 0,8 1,1 1,3 1,5 1,7 2,0 Spray gun Art. No Nozzle 0,8 1,1 1,3 1,5 1,7 2,0 Art. No available upon request Spray guns and nozzle sets with lifetime prolonging surface of fluid tip and paint needle. SATAjet 3000 K HVLP Inlet pressure: 2.5 bar Air consumption at 2.5 bar: 560 Nl/min Spray distance: 10 cm 15 cm Material connection: 3/8" male thread Nozzle 0,8 1,0 1,2 1,4 1,6 2,0 Spray gun Art. No Nozzle 0,8 1,0 1,2 1,4 1,6 2,0 Art. No available upon request Spray guns and nozzle sets with lifetime prolonging surface of fluid tip and paint needle. Required accessories for SATA pressure fed spray guns SATA paint tube G 3/8" (female thread) - 3/8" (male thread) for SATA pressure fed spray guns SATA paint strainer 60 msh, G 3/8" (female thread) and 3/8" (male thread) for SATA pressure fed spray gun except for SATAminijet Further accessories as well as material and air connections see page 50.

7 Spare Parts SATAjet 3000 K 6395 CCS Clips, green, blue, red, black packing unit 4 pieces) Paint needle packing Material connection, stainless steel Air piston rod Trigger kit Material flow control with counter nut Round/flat spray control SATAjet 3000 K, jet K Material connection, stainless steel Insert, stainless steel Air distribution ring (3 pieces) Trigger sleeve kit Seal retainer, cpl Pressure spring (3 pieces) for paint needle and air piston Adjustment screw (packing unit 3 pieces) for air micrometer Air piston head (packing unit 3 pieces) Air connection piece 1/4" (male thread) Air micrometer 9050 Tool kit Extraction tool Paint strainer Cleaning brush Allen wrench 2 mm width Allen wrench 4 mm width Universal spanner Repair kit Air piston service unit Sealing kit 17

8 SATAjet 3000 K spray mix SATAjet 3000 K spray mix Max. operating pressure atomisation air: 10.0 bar Max. operating pressure material: bar Weight incl. material filter: 650 g Spray mix gun SATAjet 3000 K spray mix with paint tube, strainer 100 msh, without paint nozzle Spray mix spray gun with inversion switch SATAjet 3000 K spray mix with paint tube, strainer 100 msh, inversion switch, without inversion nozzle Retrofit kit, inversion switch without inversion nozzle for SATAjet 3000 K spray mix Nozzles SATAjet 3000 K spray mix (not included in the scope of delivery of the Spray mix gun) Fluid tip Inversion nozzle for inversion switch * Nozzle No. Art. No. Nozzle No. Art. No. ø mm ø inch Angle Width l/min at 70 bar (1015 psi) * 0,18 0, , ,23 0, , ,23 0, , ,23 0, , ,25 0, /50 14/22 0, ,28 0, , ,28 0, , ,28 0, , ,30 0, /50 14/22 0, ,33 0, , ,33 0, , ,33 0, , ,33 0, , ,33 0, , ,35 0, /50 14/24 0, ,38 0, , ,38 0, , ,38 0, , ,40 0, /50 14/25 0, ,46 0, , ,46 0, , ,53 0, , ,60 0, ,59 Nozzle No.: XX YY 18 Angle ø mm Hose pairs see page 117. Further accessories as well as material and air connections see page msh 85 µm 100 msh 150 µm 60 msh 250 µm Strainer Set of four pcs Set of four pcs Set of four pcs.

9 Spare Parts SATAjet 3000 K spray mix Sieve 60 msh (packing unit 4 pieces) Sieve, 100 msh (packing unit 4 pieces) Pressure spring for paint needle Spring for air piston of SATA spray guns except for SATA minijet Strainer kit: Sieve 200 msh (packing unit 4 pieces), strainer holder (packing unit 2 pieces), screw (packing unit 1 piece) Air piston rod Air micrometer Air distribution ring (3 pieces) Closing screw Pre-nozzle, cpl. SATA jetk3 Spray mix Air cap round/flat spray fan Insert with seal retainer Seal retainer, cpl Carbide needle tip Material connection Paint tube with strainer 100 msh Trigger kit SATAjet 3000 spray mix, consisting of pre-nozzle and needle tip Paint needle with carbide needle tip, cpl Round/flat spray control SATAjet K3 spray mix, jet 3000 K spray mix Trigger block, cpl Trigger sleeve kit Seal retainer, cpl Adjustment screw (packing unit 3 pieces) for air micrometer Air piston head (packing unit 3 pieces) Air connection piece 1/4" (male thread) Gasket unit inversion switch Retrofit kit, inversion switch without inversion nozzle Air cap ring with protection against accidental contact Air cap ring with protection against accidental contact Repair kit Air piston service unit Nozzle cleaning kit 19

10 SATAjet 1000 B RP /HVLP SATAjet 1000 B RP Inlet pressure: 1.5 bar 2.0 bar Air consumption at 2.0 bar: 275 Nl/min Spray distance: 17 cm 21 cm Nozzle 0,8 1,0 1,3 1,6 1,8 2,0 2,5 3,0 4,0 Spray gun with 0.6 l QCC reusable PVC gravity flow cup without swivel joint Art. No Spray gun with 0.6 l QCC reusable PVC gravity flow cup with swivel joint Art. No Nozzle 0,8 1,0 1,3 1,6 1,8 2,0 2,5 3,0 4,0 Spray gun with 0.75 l QCC reusable aluminium gravity flow cup without swivel joint Art. No Nozzle 0,8 1,0 1,3 1,6 1,8 2,0 2,5 3,0 4,0 5,0 Art. No High viscosity Extensions see page 48. SATAjet 1000 B RP for glue applications SATAjet 1000 B RP nozzle 1.6 D Drall 0.6 l QCC reusable plastic cup SATAjet 1000 B RP 1.6 Drall SATAjet 1000 B RP nozzle 1.3 DA pressurised cup spray gun for dispersion glues, incl. SATA BVD add-on kit SATAjet 1000 B RP 1.3 DA for dispersion glues SATAjet 1000 B HVLP Inlet pressure: 2.0 bar Air consumption at 2.0 bar: 350 Nl/min Spray distance: 13 cm 17 cm Nozzle 1,4 1,7 1,9 2,1 Spray gun with 0.6 l QCC reusable PVC gravity flow cup without swivel joint Art. No Spray gun with 0.6 l QCC reusable PVC gravity flow cup with swivel joint Art. No Nozzle 1,4 1,7 1,9 2,1 Spray gun with 0.75 l QCC reusable aluminium gravity flow cup without swivel joint Art. No Nozzle 1,4 1,7 1,9 2,1 Art. No *HV = high viscosity 20

11 Spare Parts SATAjet 1000 B 1826 Anti-drip device (packing unit 4 pieces) 3988 Paint strainer, 300 µm (packing unit 10 pieces) 6395 CCS Clips, green, blue, red, black packing unit 4 pieces) Paint needle packing Swivel joint l QCC reusable plastic cup, cpl Screw-on lid for 0.6 l PVC cup with drip-catching ring and non-drip device Paint strainer, 300 µm (packing unit 100 pieces) Paint strainer, 300 µm (packing unit 500 pieces) Spindle, cpl., f. round / flat spray control SATAjet 2000 HVLP Air piston rod Sealing ring for air cap ring SATAjet 100 and Trigger kit Trigger sleeve kit Sealing (packing unit 3 pieces) for spindle Seal retainer, cpl Pressure spring (3 pieces) for paint needle and air piston Adjustment screw (packing unit 3 pieces) for air micrometer Air connection piece 1/4" male thread Air piston head (packing unit 3 pieces) Material flow control with counter nut Air micrometer Control knob with screw Sealing element (packing unit 5 pieces) for fluid tip Air distribution ring (packing unit 3 pieces) 9050 Tool kit Extraction tool Paint strainer Cleaning brush Allen wrench 2 mm width Allen wrench 4 mm width Universal spanner Repair kit Air piston service unit Sealing kit 21

12 SATAjet 1000 B RP /HVLP LIGNUM SATAjet 1000 B RP LIGNUM Inlet pressure: 1.5 bar 2.0 bar Air consumption at 2.0 bar: 275 Nl/min Spray distance: 17 cm 21 cm Nozzle 0,8 1,0 1,3 1,6 1,8 2,0 2,5 3,0 4,0 5,0 Spray gun with 0.6 l QCC reusable PVC gravity flow cup with swivel joint Art. No Nozzle 0,8 1,0 1,3 1,6 1,8 2,0 2,5 3,0 4,0 5,0 Art. No High viscosity Extensions see page 48. SATAjet 1000 B HVLP LIGNUM Inlet pressure: 2.0 bar Air consumption at 2.0 bar: 350 Nl/min Spray distance: 13 cm 17 cm Nozzle 1,4 1,7 1,9 2,1 Spray gun with 0.6 l QCC reusable PVC gravity flow cup with swivel joint Art. No Nozzle 1,4 1,7 1,9 2,1 Art. No Extensions see page 48. Accessories SATA BVD conversion kit SATA agitator cup, conversion kit SATA RPS disposable cup systems see page 64. Note: The SATAjet 1000 B LIGNUM is technically identical to the SATAjet 1000 B. The sophisticated refining process of the gun surface may entail slight colour shade differences. Colour changes, e.g. by the influence of light, are also possible.

13 Spare Parts SATAjet 1000 B LIGNUM 1826 Anti-drip device (packing unit 4 pieces) 3988 Paint strainer, 300 µm (packing unit 10 pieces) 6395 CCS Clips, green, blue, red, black packing unit 4 pieces) Paint needle packing Swivel joint l QCC reusable plastic cup, cpl Screw-on lid for 0.6 l PVC cup with drip-catching ring and non-drip device Paint strainer, 300 µm (packing unit 100 pieces) Paint strainer, 300 µm (packing unit 500 pieces) Spindle, cpl., f. round / flat spray control SATAjet 2000 HVLP Air piston rod Trigger kit Trigger sleeve kit Sealing (packing unit 3 pieces) for spindle Seal retainer, cpl Pressure spring (3 pieces) for paint needle and air piston Adjustment screw (packing unit 3 pieces) for air micrometer Air connection piece 1/4" male thread Air piston head (packing unit 3 pieces) Material flow control with counter nut Air micrometer Control knob with screw Sealing element (packing unit 5 pieces) for fluid tip Air distribution ring (packing unit 3 pieces) 9050 Tool kit Extraction tool Paint strainer Cleaning brush Paint strainer Allen wrench 2 mm width Allen wrench 4 mm width Universal spanner Repair kit Air piston service unit Sealing kit 23

14 SATAjet 1000 K RP /HVLP SATAjet 1000 K RP Inlet pressure: 2.5 bar Air consumption at 2.5 bar: 410 Nl/min Spray distance: 17 cm 21 cm Material connection: 3/8" male thread Nozzle 0,8 1,1 1,3 1,5 1,7 2,0 2,5 3,0 4,0 5,0 Spray gun Art. No Spray gun with lifetime prolonging surface on fluid tip and paint needle Art. No Spray gun with slit nozzle Art. No Art. No with lifetime prolonging surface of fluid tip and paint needle Art. No Slit nozzle set Art. No SATAjet 1000 K RP for adhesive applications SATAjet 1000 K RP nozzle 1.6 D Drall material connection 3/8" (male thread) SATAjet 1000 K RP 1.6 Drall SATAjet 1000 K RP nozzle 1.3 DA for dispersion adhesives, material connection 3/8" (male thread) SATAjet 1000 K RP 1.3 DA for dispersion adhesives 24 SATAjet 1000 K HVLP Inlet pressure: 2.5 bar Air consumption at 2.5 bar: 530 Nl/min Spray distance: 10 cm 15 cm Material connection: 3/8" male thread Nozzle 0,8 1,0 1,2 1,4 1,6 2,0 Spray gun Art. No Spray gun with lifetime prolonging surface on fluid tip and paint needle Art. No Art. No with lifetime prolonging surface of fluid tip and paint needle Art. No Required accessories for SATA pressure fed spray guns SATA paint tube G 3/8" (female thread) - 3/8" (male thread) for SATA pressure fed spray guns SATA paint strainer 60 msh, G 3/8" (female thread) and 3/8" (male thread) for SATA pressure fed spray gun except for SATAminijet Further accessories as well as material and air connections see page 50. Extensions see page 48.

15 Spare Parts SATAjet 1000 K 6395 CCS Clips, green, blue, red, black packing unit 4 pieces) Paint needle packing Spindle, cpl., f. round / flat spray control SATAjet 2000 HVLP Air piston rod Material connection, stainless steel Insert, cpl Trigger kit Air distribution ring (packing unit 3 pieces) Trigger sleeve kit Sealing (packing unit 3 pieces) for spindle Seal retainer, cpl Pressure spring (3 pieces) for paint needle and air piston Adjustment screw (packing unit 3 pieces) for air micrometer Air connection piece 1/4" male thread Air piston head (packing unit 3 pieces) Material flow control with counter nut Air micrometer Control knob with screw Sealing element (packing unit 5 pieces) for fluid tip 9050 Tool kit Extraction tool Paint strainer Cleaning brush Allen wrench 2 mm width Allen wrench 4 mm width Universal spanner Repair kit Air piston service unit Sealing kit 25

16 SATAjet 1000 H RP SATAjet 1000 H RP Inlet pressure: 2.5 bar Air consumption at 2.0 bar: 275 Nl/min Spray distance: 17 cm 21 cm Nozzle 1,3 1,6 1,8 2,0 Standard with 1.0 l aluminium siphon cup without swivel joint Art. No Art. No Further accessories RPS-Adapter No. 16 with QCC and connection G 3/8" (female thread) RPS Suction cup kit for 0.3 l consisting of each 25 pins, suction hose and sieve RPS Suction cup kit for 0.3 l consisting of each 50 pins, suction hose and sieve RPS Suction cup kit for 0.6 l consisting of each 25 pins, suction hose and sieve RPS Suction cup kit for 0.6 l consisting of each 50 pins, suction hose and sieve RPS Suction cup kit for 0.9 l consisting of each 25 pins, suction hose and sieve RPS Suction cup kit for 0.9 l consisting of each 50 pins, suction hose and sieve SATA RPS disposable cup systems see page 64 26

17 Spare Parts SATAjet 1000 H l aluminium suction cup, cpl Lid fitting 6395 CCS Clips, green, blue, red, black packing unit 4 pieces) Paint needle packing l aluminium suction cup, ohne Deckel Anti-drip device (pack of 4 pieces) Strainer (packing unit 2 pieces) Sealing ring (packing unit 4 pieces) Spindle, cpl., f. round / flat spray control SATAjet 2000 HVLP Material connection, stainless steel Air piston rod Trigger kit Air distribution ring (packing unit 3 pieces) Trigger sleeve kit Sealing (packing unit 3 pieces) for spindle Seal retainer, cpl Pressure spring (3 pieces) for paint needle and air piston Adjustment screw (packing unit 3 pieces) for air micrometer Air connection piece 1/4" male thread Air piston head (packing unit 3 pieces) Material flow control with counter nut Air micrometer Control knob with screw Sealing element (packing unit 5 pieces) for fluid tip 9050 Tool kit Extraction tool Paint strainer Cleaning brush Allen wrench 2 mm width Allen wrench 4 mm width Universal spanner Repair kit Air piston service unit Sealing kit 27

18 SATAjet 100 B F RP /HVLP, B P SATAjet 100 B F RP Inlet pressure: 1.5 bar 2.0 bar Air consumption at 2.0 bar: 290 Nl/min Spray distance: 18 cm 23 cm Nozzle 1,4 1,6 1,8 2,0 Spray gun with 0.6 l QCC reusable plastic gravity flow cup without swivel joint Art. No Spray gun with 0.75 l QCC reusable aluminium gravity flow cup without swivel joint Art. No Nozzle 1,4 1,6 1,8 2,0 Art. No SATAjet 100 B F HVLP Inlet pressure: 2.0 bar Air consumption at 2.0 bar: 350 Nl/min Spray distance: 13 cm 17 cm Nozzle 1,4 1,7 1,9 2,1 Spray gun with 0.6 l QCC reusable plastic gravity flow cup without swivel joint Art. No Spray gun with 0.75 l QCC reusable aluminium gravity flow cup without swivel joint Art. No Nozzle 1,4 1,7 1,9 2,1 Art. No SATAjet 100 B P Inlet pressure: 1.5 bar 2.0 bar Air consumption at 2.0 bar: 245 Nl/min Spray distance: 18 cm 23 cm Nozzle P Spray gun with 0.6 l QCC reusable plastic gravity flow cup without swivel joint Art. No Spray gun with 0.75 l QCC reusable aluminium gravity flow cup without swivel joint Art. No Nozzle P Art. No

19 Spare Parts SATAjet 100 B 1826 Anti-drip device (packing unit 4 pieces) 3988 Paint strainer, 300 µm (packing unit 10 pieces) 6395 CCS Clips, green, blue, red, black packing unit 4 pieces) Paint needle packing O-ring l QCC reusable plastic cup, cpl Screw-on lid for 0.6 l PVC cup with drip-catching ring and non-drip device Paint strainer, 300 µm (packing unit 100 pieces) Paint strainer, 300 µm (packing unit 500 pieces) Closing cap Spindle, cpl., f. round / flat spray control SATAjet 2000 HVLP Air piston rod Trigger kit Trigger sleeve kit Sealing (packing unit 3 pieces) for spindle Seal retainer, cpl Pressure spring (3 pieces) for paint needle and air piston Adjustment screw (packing unit 3 pieces) for air micrometer Air connection piece 1/4" male thread Air piston head (packing unit 3 pieces) Material flow control with counter nut Air micrometer Control knob with screw Sealing element (packing unit 5 pieces) for fluid tip Air distribution ring (packing unit 3 pieces) 9050 Tool kit Extraction tool Paint strainer Cleaning brush Allen wrench 2 mm width Allen wrench 4 mm width Universal spanner Repair kit Air piston service unit Sealing kit 29

20 SATAminijet 4400 B RP /HVLP SATAminijet 4400 B RP / RP SR Inlet pressure: 0.5 bar 2.5 bar Air consumption at 2.5 bar: 200 Nl/min Spray distance: 12 cm 19 cm Nozzle 0,5 1,4 1,6 0,8 SR 1,0 SR 1,2 SR Standard / Spot Repair with 125 ccm QQC reusable plastic gravity flow cup Art. No Spot repair with RPS disposable cup 0.3 l (2x) Art. No Nozzle 0,5 1,4 1,6 0,8 SR 1,0 SR 1,2 SR Art. No SATAminijet 4400 B HVLP / HVLP SR Inlet pressure: 0.5 bar 2.0 bar Air consumption at 2.0 bar: 120 Nl/min Spray distance: 12 cm 15 cm Nozzle 0,3 0,5 0,8 1,0 1,1 0,8 SR 1,0 SR 1,2 SR 1,4 SR Standard / Spot Repair with 125 ccm QQC reusable plastic gravity flow cup Art. No Standard / Spot Repair with RPS disposable cup 0.3 l (2x) Art. No Nozzle 0,3 0,5 0,8 1,0 1,1 0,8 SR 1,0 SR 1,2 SR 1,4 SR Art. No SATA design set with SATAminijet 4400 B HVLP 1.0 Spray fan comparison SATAminijet 4400 B HVLP SATAminijet 4400 B RP for standard applications 1.1 HVLP (at 2.0 bar) Spray distance 15 cm Wet core 15.5 cm 1.6 RP (at 2.5 bar) Spray distance 17 cm Wet core cm SATAminijet 4400 B HVLP SR SATAminijet 4400 B RP SR especially for spot repair applications: Lower risk of creating bright edges ("halos") Allows application of very thin layers of paint 1.2 HVLP SR (at 2.0 bar) Spray distance 15 cm Wet core 19.5 cm 1.2 RP SR (at 2.5 bar) Spray distance 17 cm Wet core cm

21 Spare parts SATAminijet 4400 B 3988 Paint strainer, 300 µm (packing unit 10 pieces) ml glass cup with plug-in cup ml glass cup with plug-in cup (packing unit 5 pieces) ml glass cup with blind lid (packing unit 5 pieces) Plastic lid (3 pieces) Paint strainer, 300 µm (packing unit 100 pieces) Paint strainer, 300 µm (packing unit 500 pieces) Air connection piece 1/4" male thread CCS Clips, green, blue, red, black (packing unit 4 pieces) Air distribution ring (packing unit 3 pieces) l QCC reusable plastic cup, cpl Anti-drip device (packing unit 4 pieces) Air piston rod Trigger kit Air micrometer Spindle for round / flat spray control l QCC reusable aluminium cup, cpl Screw cap with drip catcher ring and anti-drip device Material flow control with counter nut Packing for paint needle and air piston rod Adjustment screw (packing unit 3 pieces) for air micrometer Air piston head (packing unit 3 pieces) Sealing element (packing unit 5 pieces) for fluid tip Trigger sleeve kit Gasket (packing unit 3 pieces) for spindle Pressure spring (each 3 pieces) for paint needle and air piston Control knob with screw (each 2 pieces) Plug-in cup connection with QCC ml glass cup with plug-in lid (packing unit 5 pieces) and QCC plug-in connection (packing unit 1 piece) Sealing ring (packing unit 5 pieces) Tool kit Universal spanner Combi tool Cleaning brush Paint strainer Extraction tool Repair kit Air piston service unit Sealing kit 31

22 SATAminijet 3000 B HVLP replaced by SATAminijet 4400 B SATAminijet 3000 B HVLP Inlet pressure: 2.0 bar Air consumption at 2.0 bar: 115 Nl/min Spray distance: 12 cm - 15 cm Nozzle 0,3 0,5 0,8 1,0 1,1 0,8 SR 1,0 SR 1,2 SR 1,4 SR standard Art. No SR Art. No

23 Spare Parts SATAminijet 3000 B HVLP 6395 CCS Clips, green, blue, red, black packing unit 4 pieces) Counter nut Countersunk screw M 2.5 x 5, VA Air piston head Air piston rod ml glass cup with plug-in cup (packing unit 5 pieces) ml glass cup with blind lid (packing unit 5 pieces) Plastic lid (3 pieces) Adjustment screw for air micrometer Paint needle packing Screw-on lid 125 ccm PVC cup with anti-drip device Anti-drip device (4 pieces) Control knob Material flow control screw Air micrometer Spindle SATAminijet 3000 B HVLP, minijet 4 HVLP l QCC reusable plastic cup, cpl l QCC reusable aluminium cup, cpl Plug-in cup connection with QCC SATAjet 20 B, dekor 2000, minijet 3000 B HVLP, minijet 4 HVLP ml glass cup with plug-in lid (packing unit 5 pieces) and QCC plug-in connection (packing unit 1 piece) Trigger kit Packing kit air piston rod SATAminijet 3000 B HVLP, minijet 4 HVLP Air distribution ring (packing unit 3 pieces) Air connection piece 1/4" male thread Pressure spring (each 3 pieces) for paint needle and air piston Tool kit Extraction tool Cleaning brush Wrench Universal spanner Repair kit Sealing kit 33

24 SATAminijet 1000 K RP /HVLP SATAminijet 1000 K RP Inlet pressure: 2.5 bar Air consumption at 2.5 bar: 200 Nl/min Spray distance: 17 cm - 21 cm Material connection: 1/4" male thread Nozzle 0,3 0,5 0,8 1,0 1,2 1,4 Spray gun Art. No Art. No SATAminijet 1000 K HVLP Inlet pressure: 2.5 bar Air consumption at 2.0 bar: 120 Nl/min Spray distance: 10 cm - 15 cm Material connection: 1/4" male thread Nozzle 0,3 0,5 0,8 1,0 1,2 Spray gun Art. No Art. No Required Accessories SATA paint tube G 1/4 female thread - 1/4" male thread SATA paint strainer 60 msh, 1/4" (male thread) SATA paint tube G 1/4" (female thread) - 3/8" (male thread) Further accessories as well as material and air connections see page

25 Spare Parts SATAminijet 1000 K 6395 CCS Clips, green, blue, red, black packing unit 4 pieces) Counter nut Countersunk screw M 2.5 x 5, VA Air piston head Air piston rod Adjustment screw for air micrometer Paint needle packing Control knob Material flow control screw Air micrometer Trigger kit Packing kit air piston rod SATAminijet 3000 B HVLP, minijet 4 HVLP Air connection piece 1/4" male thread Material connection, stainless steel Spindle for round/flat control Air distribution ring (packing unit 3 pieces) Pressure spring (each 3 pieces) for paint needle and air piston Tool kit Extraction tool Cleaning brush Wrench Universal spanner Repair kit Sealing kit 35

26 SATAminijet 1000 H RP /HVLP SATAminijet 1000 H RP without cup Inlet pressure: 2.5 bar Air consumption at 2.5 bar: 200 Nl/min Spray distance: 17 cm - 21 cm Material connection: 1/4" male thread Nozzle 1,4 Spray gun without cup Art. No Art. No SATAminijet 1000 H HVLP without cup Inlet pressure: 2.0 bar Air consumption at 2.0 bar: 120 Nl/min Spray distance: 10 cm - 15 cm Material connection: 1/4" male thread Nozzle 1,4 Spray gun without cup Art. No Art. No Required Accessories RPS-Adapter No. 17 with QCC and connectiong 1/4" (female thread) RPS Suction cup kit for 0.3 l consisting of each 25 pins, suction hose and sieve RPS Suction cup kit for 0.3 l consisting of each 50 pins, suction hose and sieve RPS Suction cup kit for 0.6 l consisting of each 25 pins, suction hose and sieve RPS Suction cup kit for 0.6 l consisting of each 50 pins, suction hose and sieve RPS Suction cup kit for 0.9 l consisting of each 25 pins, suction hose and sieve RPS Suction cup kit for 0.9 l consisting of each 50 pins, suction hose and sieve SATA RPS disposable cup systems see page

27 Spare Parts SATAminijet 1000 H 6395 CCS Clips, green, blue, red, black packing unit 4 pieces) Counter nut Countersunk screw M 2.5 x 5, VA Air piston head Air piston rod Adjustment screw for air micrometer Paint needle packing Control knob Material flow control screw Air micrometer Trigger kit Packing kit air piston rod SATAminijet 3000 B HVLP, minijet 4 HVLP Air connection piece 1/4" male thread Material connection, stainless steel Spindle for round/flat control Air distribution ring (packing unit 3 pieces) Pressure spring (each 3 pieces) for paint needle and air piston Tool kit Extraction tool Cleaning brush Wrench Universal spanner Repair kit Sealing kit 37

28 SATAjet B (SATAjet GR) SATAjet B Inlet pressure: 4.0 bar Air consumption at 4.0 bar: 350 Nl/min Spray distance: 18 cm 23 cm Nozzle 1,0 E MSB 1,4 E 1,5 E 1,7 E 2,0 W Spray gun with 0.6 l QCC reusable plastic gravity flow cup without swivel joint Art. No Spray gun with 0.6 l QCC reusable PVC gravity flow cup with swivel joint Art. No Nozzle 1,0 E MSB 1,4 E 1,5 E 1,7 E 2,0 W Art. No SATAjet GR Inlet pressure: 4.0 bar Air consumption at 4.0 bar: 350 Nl/min Spray distance: 18 cm 23 cm Nozzle 1,3 W 1,5 W 1,7 W 2,0 W 2,5 W 3,0 W Art. No

29 Spare Parts SATAjet B (SATAjet GR) 422 Gasket for paint needle 1503 Countersunk screw M4 x 8 DIN 965, stainless steel, for micrometer und round/flat spray control 1826 Anti-drip device (packing unit 4 pieces) 2600 Service unit for nozzle insert for SATAjet/B, H, K and NR 92, consisting of nozzle insert, distribution plate and sealing ring 3566 Inlet nipple 3657 Control knob 3749 Stuffing box for air piston SATAjet, KL, HKD and MC-B 3988 Paint strainer, 300 µm (packing unit 10 pieces) 6445 Paint needle packing 6486 Trigger kit Swivel joint Air piston rod l reusable plastic cup, cpl Screw-on lid for 0.6 l PVC cup with drip-catching ring and non-drip device Air micrometer Spindle complete, for SATAjet/90, SATAjet, regulation valve and MC-B Material flow control with counter nut Washer Paint strainer, 300 µm (packing unit 100 pieces) Paint strainer, 300 µm (packing unit 500 pieces) Trigger sleeve kit Sealing (packing unit 3 pieces) for spindle Pressure spring (3 pieces) for paint needle and air piston Adjustment screw (packing unit 3 pieces) for air micrometer Air connection piece 1/4" male thread Air piston head (packing unit 3 pieces) 9654 Tool kit Paint strainer Cleaning brush Socket wrench 7 mm width Internal hexagonal wrench 2/4 mm width Universal spanner Repair kit 9829 Sealing kit 39

30 SATAjet H SATAjet H Inlet pressure: 4.0 bar Air consumption at 4.0 bar: 380 Nl/min Spray distance: 18 cm 23 cm Nozzle 1,5 MSH 2,0 Spray gun with 1.0 l aluminium siphon cup Art. No Nozzle 1,5 MSH 2,0 Art. No Required Accessories RPS-Adapter No. 16 with QCC and connection G 3/8" (female thread) RPS Suction cup kit for 0.3 l consisting of each 25 pins, suction hose and sieve RPS Suction cup kit for 0.3 l consisting of each 50 pins, suction hose and sieve RPS Suction cup kit for 0.6 l consisting of each 25 pins, suction hose and sieve RPS Suction cup kit for 0.6 l consisting of each 50 pins, suction hose and sieve RPS Suction cup kit for 0.9 l consisting of each 25 pins, suction hose and sieve RPS Suction cup kit for 0.9 l consisting of each 50 pins, suction hose and sieve SATA RPS disposable cup systems see page

31 Spare Parts SATAjet H 1503 Countersunk screw M4 x 8 DIN 965, stainless steel, for micrometer und round/flat spray control 2600 Service unit for nozzle insert for SATAjet/B, H, K and NR 92, consisting of nozzle insert, distribution plate and sealing ring l aluminium suction cup, cpl Lid fitting 3657 Control knob 6445 Paint needle packing 6973 Air piston servicing unit l aluminium suction cup, ohne Deckel Anti-drip device (pack of 4 pieces) Strainer (packing unit 2 pieces) Sealing ring (packing unit 4 pieces) Pressure spring (packing unit 12 pieces) for air piston packing Air micrometer Spindle complete, for SATAjet/90, SATAjet, regulation valve and MC-B Material flow control with counter nut Trigger sleeve kit Sealing (packing unit 3 pieces) for spindle Pressure spring (3 pieces) for paint needle and air piston Adjustment screw (packing unit 3 pieces) for air micrometer Air connection piece 1/4" male thread Air piston head (packing unit 3 pieces) 9654 Tool kit Paint strainer Cleaning brush Socket wrench 7 mm width Internal hexagonal wrench 2/4 mm width Universal spanner Repair kit Sealing kit 41

32 SATA spray master RP SATA spray master RP Inlet pressure: 3.0 bar Air consumption: 230 Nl/min Nozzle SM 1,7 2,0 Spray gun with 0.7 l pressurised cup, pressure gauge and reducing valve Art. No Art. No

33 Spare Parts SATA spray master RP 422 Gasket for paint needle 1503 Countersunk screw M4 x 8 DIN 965, stainless steel, for micrometer und round/flat spray control 2600 Service unit for nozzle insert for SATAjet/B, H, K and NR 92, consisting of nozzle insert, distribution plate and sealing ring 3657 Control knob 3749 Stuffing box for air piston SATAjet, KL, HKD and MC-B 6445 Paint needle packing 6486 Trigger kit 6981 SATA quick coupling nipple G 1/4" (female thread) (packing unit 5 pieces) 8268 Sealing ring Swivel joint l pressure pot, aluminium without lid Safety pressure relief valve BVD Plastic air hose for BVD and agitator cup Aluminium lid, cpl Air piston rod Air micrometer Air connection for aluminium lid Sealing ring (packing unit 4 pieces) Spindle complete, for SATAjet/90, SATAjet, regulation valve and MC-B Material flow control with counter nut Washer Control fittings, complete, for BVD pressurized cup connection kit (GR and LM) Anti-drip device (packing unit 10 pieces) Connection for pressurised cup, cpl Air hose cpl. w. pressurized cup connection, for SATA Spray-Master Pressure release screw (packing unit 2 pieces) Trigger sleeve kit Sealing (packing unit 3 pieces) for spindle Pressure spring (3 pieces) for paint needle and air piston Adjustment screw (packing unit 3 pieces) for air micrometer Air connection piece 1/4" male thread Air piston head (packing unit 3 pieces) 9654 Tool kit Paint strainer Cleaning brush Socket wrench 7 mm width Internal hexagonal wrench 2/4 mm width Universal spanner Repair kit 9829 Sealing kit 43

34 SATAjet 20 B SATAjet 20 B Inlet pressure: 1.0 bar Air consumption at 1.5 bar: 40 Nl/min Spray distance: variable Nozzle 0,2 fineline 0,2 0,35 0,5 0,8 1,0 Spray gun with 65 ml PVC cup Art. No Art. No Spray gun with 65 ml plastic cup, glass plug-on cup and 3 glass jars with blank lid Art. No Nozzle 0,2 fineline 0,2 0,35 0,5 0,8 1,0 Art. No Art. No Line thicknesses SATAjet 20 B mm 0.6 mm 0.8 mm 1.1 mm 1.5 mm 1.9 mm fineline SATA jet 20 B design set SATAjet 20 B design set 0.5 with accessories in case Contains: various cup versions such as plastic cup, plug-in cup, glass cup, cleaning kit, SATA air micrometer with pressure gauge, spray gun stand, tool kit, nozzle set, PVC compressed air hose. Completely assembled air hoses see page 116.

35 Spare Parts SATAjet 20 B 9860 SATA air micrometer 0-845, 1/4" (male thread) and G 1/4" (female thread) 9878 SATA mini filter 1/4" (male thread) ml PVC reusable cup, cpl PVC screw-on lid 65 ccm PVC cup SATAjet 20 B, dekor ml glass cup with plug-in cup SATA PVC compressed air hose, transparent, 3 m long with G 1/4" (female thread), mini quick coupling and nipple Pressure spring for air piston Air piston head Air piston rod Service unit air piston rod SATAjet 20 B, dekor 2000, minijet 3 HVLP ml glass cup with plug-in cup (packing unit 5 pieces) ml glass cup with blind lid (packing unit 5 pieces) Spray gun handle SATAjet 20 B, dekor Air pipe Closing screw SATAjet 20 B, dekor Compression screw 1/8" (male thread) Material flow control screw O-ring Air connection 1/8" (male thread) - 1/4" (male thread) Pressure spring for paint needle Paint needle packing Trigger kit Plug-in cup connection with QCC SATAjet 20 B, dekor 2000, minijet 3000 B HVLP, minijet 4 HVLP ml glass cup with plug-in lid (packing unit 5 pieces) and QCC plug-in connection (packing unit 1 piece) 9373 Tool kit Cleaning brush Universal spanner Hexagonal screwdriver Repair kit Sealing kit 45

36 SATAgraph 1/4/3 SATAgraph 1 - The Starter Model Inlet pressure: variable Air consumption: 10 Nl/min Spray distance: variable Nozzle 0,25 0,45 Each with aluminium case SATAgraph with 2.5 ml gravity flow cup, in aluminium case, without hose SATAgraph with 5 ml suction cup, in aluminium case, without hose SATAgraph with 5 ml suction cup, in aluminium case, without hose Nozzle 0,25 0,45 Art. No SATAgraph 3 - Premium Airbrush for Professionals 46 Inlet pressure: variable Air consumption: 10 Nl/min Spray distance: variable Nozzle 0,15 0,25 0,45 0,65 Each with aluminium case SATAgraph with 2.5 ml gravity flow cup, PVC air hose 3m with mini quick coupling and G 1/4" (female thread) SATAgraph with 2.5 ml gravity flow cup, in aluminium case, without hose SATAgraph with 5 ml siphon cup, PVC air hose 3 m with mini quick coupling and G 1/4" (female thread) SATAgraph with 5 ml siphon cup, in aluminium case, without hose Nozzle 0,15 0,25 0,45 0,65 Art. No SATAgraph 4* - Universal airbrush gun Nozzle 0,5 Each with aluminium case SATAgraph 4 nozzle 0.5 with 7 ml standard cup SATAgraph 4 nozzle 0.5 with 7 ml side cup SATAgraph 4 nozzle 0.5 with 6 ml suction cup Nozzle 0,5 Art. No Inlet pressure: variable Air consumption: 10 Nl/min Spray distance: variable * SATAgraph 4 is supplied without hoses and quick coupling nipple. These components have to be ordered separately (see spare parts) Air hoses for design spray guns see page 116.

37 Spare parts SATAgraph 1/4/3 Spray Guns Cup Systems Breathing Protection Filter Technology Accessories SATAgraph Coupling nipple (packing unit 3 pieces) ml gravity flow cup, cpl ml gravity flow cup, cpl ml suction cup, cpl Trigger O-ring (packing unit 5 pieces) O-Ring (packing unit 5 pieces) Repair kit SATAgraph Coupling nipple (packing unit 3 pieces) ml gravity flow cup, cpl ml gravity flow cup, cpl ml suction cup, cpl Needle cap Grip end piece Trigger O-ring (packing unit 5 pieces) O-Ring (packing unit 5 pieces) SATAgraph Wrench for nozzle head O-Ring (packing unit 5 pieces) Trigger Handle end piece, complete Protection cap for paint needle ml glass cup, cpl ml metal suction cup, cpl ml metal side cup, cpl Plug for material supply from the side, red Lid for metal paint cup, side cup and gravity flow cup version ml glass cup, cpl. with neutral lid ml glass cup, cpl ml glass cup, cpl. with Fast Blast Hoses and nipples Coupling nipple (packing unit 3 pieces) SATA PVC compressed air hose, transparent, 3 m long with G 1/4" (female thread), mini quick coupling and nipple SATA Fibre air hose, 2.5 m long with G 1/4" (female thread), mini quick coupling B 30 ml S S 30 ml H ml H 23 ml Repair kit Repair kit

38 Extensions SATAjet 1000 K RP, B RP Extensions SATAjet 1000 K RP Extension with standard nozzle (0 ), 20 cm with nozzle set 1.5 RP for SATAjet 1000 K RP Extension with diagonal spray nozzle (30 ), 20 cm with nozzle set 1.6 RP for SATAjet 1000 K RP Extension with rotary nozzle (360 ), 20 cm with nozzle set 1.6 RP for SATAjet 1000 K RP Extension with angular head nozzle (90 ), 20 cm with nozzle set 1.5 RP for SATAjet 1000 K RP Extensions SATAjet 1000 B RP Extension with standard nozzle (0 ), 20 cm with nozzle set 1.6 RP for SATAjet 1000 B RP Extension with diagonal spray nozzle (30 ), 20 cm with nozzle set 1.6 RP for SATAjet 1000 B RP Extension with rotary nozzle (360 ), 20 cm with nozzle set 1.6 RP for SATAjet 1000 B RP Extension with angular head nozzle (90 ), 20 cm with nozzle set 1.6 RP for SATAjet 1000 B RP Extension with diagonal spray nozzle (30 ), 40 cm with nozzle set 1.6 RP for SATAjet 1000 B RP Extension with diagonal spray nozzle (30 ), swivelling, 20 cm with nozzle set 1.6 RP for SATAjet 1000 B RP, preferabbly with BVD pressurised cup Further extensions are available upon request.

39 Accessories for SATA suction cup spray guns Adapters for the use of SATA RPS with suction cup kit RPS-Adapter No. 17 with QCC and connectiong 1/4" (female thread) for SATAminijet 1000 H RPS-Adapter No. 16 with QCC and connection G 3/8" (female thread) for SATAjet 1000 H Suction cup kit for SATAminijet 1000 H RP/HVLP, SATAjet 1000 H RP RPS Suction cup kit for 0.3 l consisting of each 25 pins, suction hose and sieve RPS Suction cup kit for 0.3 l consisting of each 50 pins, suction hose and sieve RPS Suction cup kit for 0.6 l consisting of each 25 pins, suction hose and sieve RPS Suction cup kit for 0.6 l consisting of each 50 pins, suction hose and sieve RPS Suction cup kit for 0.9 l consisting of each 25 pins, suction hose and sieve RPS Suction cup kit for 0.9 l consisting of each 50 pins, suction hose and sieve SATA RPS disposable cup systems see page

40 Material and air connection SATAjet 3000 K, 1000 K 6981 SATA quick coupling nipple G 1/4" (female thread) (packing unit 5 pieces) SATA quick coupling 1/4" (male thread) SATA paint strainer 60 msh, G 3/8" (female thread) and 3/8" (male thread) SATA material coupling 3/8" (male thread) for SATA pressure fed spray guns with plug-in nipple G 3/8" (female thread) SATA material coupling 3/8" (male thread) with plug-in nipple G 3/8" (female thread) and material strainer 60 msh SATA paint tube G 3/8" (female thread) - 3/8" (male thread) SATA hose pair 9 x 9 mm, 15 m, with covering fabric netting, G 3/8" and G 1/2" (material), G1/4" (air) (female thread) SATA hose pair 9 x 9 mm, 10 m, with covering fabric netting, G 3/8" and G 1/2" (material), G 1/4" (air) (female thread) SATA hose pair 9 x 9 mm, 6 m, with covering fabric netting, G 3/8" and G 1/2" (material), G 1/4" (air) (female thread) Spare sieves Sieve 60 msh (packing unit 4 pieces) Sieve, 100 msh (packing unit 4 pieces) Strainer kit: Sieve 200 msh (packing unit 4 pieces), strainer holder (packing unit 2 pieces), screw (packing unit 1 piece) Material tube Material coupling with plug-in nipple and sieve Hose pair 9x9 mm with braided cover (6 m) (10 m) (15 m) Material tube Quick coupling nipple G 1/4'' (female thread) 6981 (packing unit 5 pieces) Quick coupling 1/4'' (male thread) Hose pair 9x9 mm with braided cover (6 m) (10 m) (15 m) Strainer with sieve Material tube Material coupling with plug-in nipple Hose pair 9x9 mm with braided cover (6 m) (10 m) (15 m) Material coupling with plug-in nipple and sieve Hose pair 9x9 mm with braided cover (6 m) (10 m) (15 m)