See Figure 1. A = 1 / JIC Tapper B = 1 / JIC Tapper

Transcription

1 Instruction Sheet P/N Hose Fittings 1. Fittings for High-Pressure Hose This section has the following fittings: Hose-to-hose connectors Hose-to-hose swivel elbows Straight pipe-to-hose connectors Pipe-to-hose elbows Quick-disconnect coupler Y-fittings Cap (female) Hose-to-Hose Connectors See Figure 1. = 1 / JIC Tapper = 1 / JIC Tapper Part Material Specifications Feature / / 2-20 Steel zinc plated 3 / 16 and 1 / 4 hose-to-hose / / stainless steel 3 / 16 and 1 / 4 hose-to-hose / / 4-16 Steel zinc plated 3 / 8 hose-to-hose / / 4-16 Steel zinc plated 3 / 16 and 1 / 4 hose to 3 / 8 hose Fig. 1 Hose-to-Hose Connector ll rights reserved

2 2 Hose Fittings Hose-to-Hose Swivel Elbows See Figure 2. = 37 JIC Tapper female = 37 JIC Tapper male Part Material Specifications Feature / / 2-20 Steel zinc plated 3 / 16 and 1 / 4 hose-to-fitting / / Steel zinc plated 5 / 16 PTFE hose-to-fitting Fig. 2 Hose-to-Hose Swivel Elbow See Figure 3. = 37 JIC Tapper male = 37 JIC Tapper female Part Material Specifications Feature / / 4 NPTF Steel zinc plated Nordson hose-to-female NPT Fig. 3 Hose-to-Female NPT ll rights reserved

3 Hose Fittings 3 Straight Pipe-to-Hose Connectors See Figure 4. = NPT = 37 JIC Taper Part Pipe Hose Material Specifications Feature / 4 1 / 2-20 Steel zinc plated Standard hose / 8 1 / 2-20 Steel zinc plated Standard hose / 4 1 / stainless steel Standard hose / 4 9 / rass nickel plated For 5 / 16 PTFE hose / 8 9 / stainless steel For 5 / 16 PTFE hose / 2 7 / 8-14 Steel zinc plated Siphon / 8 3 / 4-16 Steel zinc plated Drain off / 2 7 / stainless steel Siphon / 8 3 / stainless steel Drain off / 4 7 / 8-14 Steel zinc plated Siphon / 4 7 / stainless steel Siphon / / Steel zinc plated 180C and 25 2 and 4: / 4 3 / 4-16 Steel zinc plated Drain off / / stainless steel 180C and 25 2 and 4: / 2 3 / 4-16 Steel zinc plated NH4 wide/dual passage heaters Fig. 4 Straight Pipe-to-Hose Connector ll rights reserved

4 4 Hose Fittings Pipe to Hose Elbows See Figure 5. = NPT = 37 JIC Taper Part Pipe Pipe Material Specifications Feature / 4 1 / 2-20 Steel zinc plated Standard hose / 4 1 / stainless steel Standard hose / 4 9 / Steel zinc plated For 5 / 16 PTFE hose / 2 7 / 8-14 Steel zinc plated Siphon / 2 7 / stainless steel Siphon / 8 3 / 4-16 Steel zinc plated Drain off / 8 1 / 2-20 Steel nickel plated Corrosion resistant / / Steel zinc plated 180C and 25 2 and 4:1 siphon / / stainless steel 180C and 25 2 and 4:1 siphon / 4 3 / 4-16 Steel zinc plated / 4 7 / 8-14 Steel zinc plated Siphon / 4 7 / stainless steel Siphon Fig. 5 Pipe-to-Hose Elbow ll rights reserved

5 Hose Fittings 5 Quick-Disconnect Coupler See Figure 6. This connector is designed for dead-end hand airless guns only. Material flows through this connector in one direction only from the male half through the female half. Item Part Material Specifications Quick-disconnect Male, half, 1 / 2-20 JIC Female, half, 5 / 8-18 male O-ring 1 / 2 x 5 / 8 in Fig. 6 Quick-Disconnect Coupler Y-Fittings See Figure 7. Part (NPT) (NPT) C (NPT) Material Specifications Feature / 4 1 / 4 1 / 4 Steel zinc plated Cold airless Y Fig. 7 Y -Fitting ll rights reserved

6 6 Hose Fittings Cap (Female) See Figure 8. Part Material Specifications / 2-20 JIC Steel zinc plated Fig. 8 Cap (Female) ll rights reserved

7 Hose Fittings 7 2. High-Pressure Pipe This section has the following fittings: Nipples Pipe-reducing bushings (male to female) Pipe couplings Male reducers Street elbows 90 elbows Pipe plugs Pipe tees Nipples See Figure 9. Part (NPT) L Material Specifications Feature / / 2 Steel zinc plated Pipe-to-pipe / / 2 Steel zinc plated / 4 Close Steel zinc plated / / 16 hex 316 stainless steel / / 16 Standard steel / / 16 hex Steel zinc plated / 8 Close Steel nickel plated / / 2 Steel zinc plated / / 2 Steel zinc plated / 8 3 Steel zinc plated / / 16 hex 316 stainless steel / 2 Close, hex Steel zinc plated L Fig. 9 Nipple ll rights reserved

8 8 Hose Fittings Pipe-Reducing ushings (Male and Female) See Figure 10. = male = female Part (NPT) (NPT) Material Specifications / 8 1 / 4 Steel galvanized / 4 1 / 8 Steel zinc plated / 8 1 / stainless steel Fig. 10 Pipe-Reducing ushing (Male and Female) Pipe Couplings See Figure 11. Part (NPT) (NPT) Material Specifications / 4 1 / 4 Steel zinc plated / 4 3 / 8 Steel zinc plated / 4 3 / stainless steel / 8 3 / 8 Steel zinc plated Fig. 11 Pipe Coupling ll rights reserved

9 Hose Fittings 9 Male Reducers See Figure 12. Part (NPT) (NPT) Material Specifications / 8 1 / 4 Steel nickel plated / 2 1 / 4 Steel zinc plated / 4 1 / 2 Steel zinc plated / 4 1 / stainless steel Fig. 12 Male Reducer Street Elbows See Figure 13. Part (NPT) (NPT) Material Specifications Feature / 8 1 / 8 Steel zinc plated SE hydraulic / 4 1 / 4 Steel zinc plated Long-high-pressure / 4 1 / stainless steel SE hydraulic / 8 3 / stainless steel SE hydraulic Fig. 13 Street Elbow ll rights reserved

10 10 Hose Fittings 90 Elbows See Figure 14. Part (NPT) (NPT) Material Specifications Feature / 4 1 / 4 Steel zinc plated SE hydraulic / 8 3 / 8 Steel zinc plated SE hydraulic / 8 3 / stainless steel SE hydraulic Fig Elbow Pipe Plugs See Figure 15. Part Material Specifications Feature / 8 NPTF Hex center sunk Steel zinc plated / 16 NPTF Hex center sunk Steel zinc plated / 4 NPTF Hex center sunk Steel zinc plated / 4 NPTF Hex center sunk Steel zinc plated / 4 NPTF Square Delrin Delrin / 8 NPTF Hex center sunk Steel zinc plated / 2 NPT Hex center sunk Steel zinc plated / 4 NPTF Hex center sunk Steel zinc plated / 8 NPTF Hex center sunk Steel zinc plated Fig. 15 Pipe Plug ll rights reserved

11 Hose Fittings 11 Pipe Tees See Figure 16. Part (NPT) (NPT) C (NPT) Material Specifications Feature / 4 1 / 4 1 / 4 Steel zinc plated SE hydraulic / 8 3 / 8 3 / malleable zinc plated 2000 psi max / 2 1 / 2 1 / 2 Steel zinc plated SE hydraulic / 4 3 / 4 1 / 2 Steel zinc plated Circular valve / 2 1 / 2 1 / stainless steel SE hydraulic C Fig. 16 Pipe Tee ll rights reserved

12 12 Hose Fittings 3. High-Pressure Tube Pipe-to-Tube Male Connectors This section has the following fittings: Pipe-to-tube male connectors Pipe-to-tube male elbows Tube-to-tube connectors Tube-to-tube elbows See Figure 17. = OD tube compression Part Material Specifications Feature / 8 NPTF 3 / 8 OD Steel zinc plated Seamless steel tube / 4 NPT 3 / 8 OD Steel zinc plated Seamless steel tube / 8 NPT 3 / 8 OD Steel zinc plated Seamless steel tube Fig. 17 Pipe-to-Tube Male Connector Pipe-to-Tube Male Elbows See Figure 18. = OD tube compression Part Pipe (NPT) Tubing Material Specifications Feature / 8 5 / 16 OD Steel zinc plated Seamless steel tube / 8 3 / 8 OD Steel zinc plated Seamless steel tube / 8 3 / 8 OD 316 stainless steel Seamless steel tube / 4 3 / 8 OD 316 stainless steel Seamless steel tube / 4 3 / 8 OD Steel zinc plated Seamless steel tube Fig. 18 Pipe-to-Tube Male Elbow ll rights reserved

13 Hose Fittings 13 Tube-to-Tube Connectors See Figure 19. Part Tubing Tubing Material Specifications Feature / 8 OD 3 / 8 OD Steel zinc plated Seamless steel tube Fig. 19 Tube-to-Tube Connector Tube-to-Tube Elbows See Figure 20. Part Tubing Tubing Material Specifications Feature / 8 OD 3 / 8 OD Steel zinc plated Seamless steel tube Fig. 20 Tube-to-Tube Elbow ll rights reserved

14 14 Hose Fittings 4. Low-Pressure Pipe Nipples This section has the following fittings: Nipples Reducing bushings Elbows Street elbows Tees Couplings and reducing coupling Cross ulkhead fitting See Figure 21. Part (NPT) L Material Specifications / 8 3 / 4 Steel zinc plated / / 2 Steel galvanized / 4 3 / 4 rass / 4 3 rass / 2 Close Steel galvanized / 4 2 Steel galvanized L Fig. 21 Nipple Reducing ushings See Figure 22 and refer to the Pipe Reducing ushings (Male and Female) table in Pipe High Pressure. Fig. 22 Pipe-Reducing ushing ll rights reserved

15 Hose Fittings 15 Elbows See Figure 23. Part (NPT) (NPT) Material Specifications Feature / 4 1 / malleable zinc plated / 4 1 / malleable galvanized Reducing / 2 3 / malleable galvanized Reducing Fig. 23 Elbow Street Elbows See Figure 24. Part (NPT) (NPT) Material Specifications Feature / 8 1 / 8 rass zinc plated SE J530a / 8 1 / 4 Steel or brass / 4 1 / 4 rass Short Fig. 24 Street Elbow ll rights reserved

16 16 Hose Fittings Tees See Figure 25. Part (NPT) (NPT) C (NPT) Material Specifications / 4 1 / 4 1 / 4 rass / 8 3 / 8 3 / malleable galvanized / 8 3 / 8 1 / malleable black Reducing tee / 2 3 / 8 1 / malleable black Reducing tee / 8 3 / 8 1 / malleable black Reducing tee Feature C Fig. 25 Tee Couplings and Reducing Coupling See Figure 26. Part (NPT) (NPT) Material Specifications Feature / 8 1 / malleable galvanized / 2 3 / malleable black Reducing / 2 3 / malleable galvanized Reducing / 4 1 / malleable galvanized Reducing / 4 1 / pound brass Reducing Fig. 26 Couplings and Reducing Coupling ll rights reserved

17 Hose Fittings 17 Cross See Figure 27. Part (NPT) (NPT) C (NPT) D (NPT) / 4 1 / 4 1 / 4 1 / malleable zinc plated / 2 1 / 2 1 / 2 1 / malleable galvanized / 4 3 / 4 3 / 4 3 / malleable zinc plated / 4 3 / 4 3 / 4 3 / stainless steel Material Specifications C D Fig. 27 Cross ulkhead Fitting See Figure 28. Part (NPTF) Material Specifications / 4 3 / 4-16 ulkhead fitting, 1 / 4 NPTF / ulkhead fitting, 3 / 8 NPTF Fig. 28 ulkhead Fitting ll rights reserved

18 18 Hose Fittings 5. Low-Pressure Hose This section has the following fittings: Female connectors Male adapters Male reducer Circulation block Quick-disconnect air Quick-disconnect fluid Female Connectors See Figure 29. = used for air hose and low-pressure fluid hose. = plastic tube or plastic paint hose size. Part (NPS) Tube Material Specifications Feature / 4 1 / 4 in. rass nickel plated For 1 / 4 ID paint tube / 8 1 / 4 in. rass nickel plated For 1 / 4 ID paint tube / 8 3 / 8 in. rass nickel plated For 3 / 8 ID paint tube Fig. 29 Female Connector Male dapters See Figure 30. = used for air hose and low-pressure fluid. Part (NPT) Material Specifications Feature / 8 3 / 8 NPS Steel zinc plated Pipe-to-air/fluid hose / 8 1 / 4 NPS rass Pipe-to-air/fluid hose / 4 3 / 8 NPS Steel zinc plated Pipe-to-air/fluid hose / 4 1 / 4 NPSM rass cadmium plated Pipe-to-air/fluid hose Fig. 30 Male dapter ll rights reserved

19 Hose Fittings 19 Male Reducer See Figure 31. Part (NPSM) (NPSM) Material Specifications Feature / 4 3 / 8 rass Hose-to-hose Fig. 31 Male Reducer Circulation lock See Figure 32. Part (NPT) and C C (NPS) Material Specifications Feature / 8 (female) 3 / 8 (male) 3 / 8 (male) luminum and steel zinc plated Gun mounting C Fig. 32 Circulation lock Quick-Disconnect ir See Figure 33. Part (NPT) Material Specifications Feature / 4 Steel Female half / 4 Steel Male half Fig. 33 Quick-Disconnect ir ll rights reserved

20 20 Hose Fittings Quick-Disconnect Fluid See Figure 34. Part (NPT) Material Specifications Feature / 4 Stainless steel Quick disconnect, female and male Fig. 34 Quick-Disconnect Fluid ll rights reserved

21 Hose Fittings Low-Pressure Tube This section has the following fittings: Pipe-to-tube male elbows Tee tube-to-pipe or tube-to-tube Nut with ferrule Pipe-to-tube male connectors Tube-to-tube connectors Pipe-to-tube connector female Pipe-to-Tube Male Elbows See Figure 35. = OD plastic tube compression Part Pipe (NPTF) Tubing Material Specifications Feature / 8 1 / 8 rass Plastic ferrule / 8 1 / 4 rass Plastic ferrule / 4 1 / 4 rass Plastic ferrule / 8 3 / 8 rass Plastic ferrule / 4 3 / 8 rass Plastic ferrule / 8 3 / 8 rass Plastic ferrule / 8 1 / 2 rass Plastic ferrule / 8 1 / 4 Nylon ll plastic Fig. 35 Pipe-to-Tube Male Elbow ll rights reserved

22 22 Hose Fittings Tee Tube-to-Pipe or Tube-to-Tube See Figure 36. = OD plastic tube compression Part Tubing Material Specifications Feature / 8 NPTF (pipe) 1 / 4 x 1 / 4 rass Plastic ferrule / 4 (tube) 1 / 4 x 1 / 4 rass Plastic ferrule 1 2 Fig. 36 Tee Tube-to-Pipe or Tube-to-Tube Nut with Ferrule See Figure 37. = OD plastic tube Part Material Specifications Feature / 4 rass Plastic ferrule Fig. 37 Nut with Ferrule ll rights reserved

23 Hose Fittings 23 Pipe-to-Tube Male Connectors See Figure 38. = OD plastic tube compression Part Pipe (NPTF) Tubing Material Specifications Feature / 8 1 / 4 rass Plastic ferrule / 4 1 / 4 rass / 8 1 / 4 rass / 8 3 / 8 rass / 4 3 / 8 rass / 8 3 / 8 rass Fig. 38 Pipe-to-Tube Male Connector Tube-to-Tube Connectors See Figure 39. = OD plastic tube compression = OD plastic tube compression Part Tubing Tubing Material Specifications Feature / 4 1 / 4 rass Ferrule / 4 1 / 4 rass ulk head Fig. 39 Tube-to-Tube Connector ll rights reserved

24 24 Hose Fittings Pipe-to-Tube Connector Female See Figure 40. = OD plastic tube compression Part Pipe (NPTF) Tubing Material Specifications Feature / 8 1 / 4 rass Plastic ferrule Fig. 40 Pipe-to-Tube Connector Female ll rights reserved

25 Hose Fittings Low-Pressure Plastic Fittings This section has the following fittings: Straight connectors Elbows Tube nuts Straight Connectors See Figure 41. Part Thread Thread Feature / 8 NPT 1 / 4 ID tube Used on air line plastic regulator and dump valve Fig. 41 Straight Connector Elbows See Figure 42. Part Thread Thread Feature / 8 NPTF 3 / 16 ID tube special PTFE Heavy wall; used on plastic regulator / 8 NPT 3 / 16 ID tube special PTFE Heavy wall with nut / 8 NPT 1 / 4 ID tube Used on air line plastic regulator and dump valve / 4 NPT 3 / 16 ID tube special PTFE Heavy wall; used on N-9 and dump valve Fig. 42 Elbow ll rights reserved

26 26 Hose Fittings Tube Nuts See Figure 43. Part Thread Feature / 8 OD tube Nut with ferrule; used on heavy wall fittings / 2 OD tube Nut with ferrule; used on heavy wall fittings Fig. 43 Tube Nut Original copyright date Nordson and the Nordson logo are registered trademarks of Nordson Corporation. Delrin is a registered trademark of E. I. DuPont de Nemours and Company. ll rights reserved