PE100 pressure fittings
|
|
|
- Myles Doyle
- 7 years ago
- Views:
Transcription
1 Table of contents Table of contents...1 pressure fittings Short fittings for butt-welding Stub flanges...2 Tees...8 Bends...15 Reducers...17 End caps...26 Unions...28 Adaptors...34 Long fittings Stub flanges...36 Tees...38 Elbows...42 Bends...45 Reducers...46 End caps...49 Electrofusion couplers FRIALEN...51 Fittings made from pipe Tees welded...54 Tees welded with reduced branch...59 Tees extrusion welded with reduced branch...65 Tees reduced machined - pressure class...73 Bends seamless formed...81 Bends welded Backing rings and gaskets Profile backing rings PP with ductile iron core Backing rings PP with ductile iron core Profile backing rings ductile iron and coated Backing rings GRP Flange connections Blind flanges Gaskets Profile gaskets GOEMA pipe clips GOEMA pipe clips Pipe clips complete Pipe clips components Index Alphabetical index Index of article numbers Table of contents 1
2 Stub flange short SDR 33 for butt-welding SDR 33 water 3,2 bar d e Art. Nr. h l d 1 d 2 L * * * * * * fabrication on order, returning not possible With grooved jointing face. 2 Short fittings for butt-welding
3 Stub flange short SDR 17 for butt-welding SDR 17 water 10 bar/gas 5 bar d e Art. Nr. h l d 1 d 2 L * * * * * fabrication on order, returning not possible With grooved jointing face. Short fittings for butt-welding 3
4 Stub flange short SDR 11 for butt-welding SDR 11 water 16 bar/gas 10 bar d e Art. Nr. h l d 1 d 2 L * * fabrication on order, returning not possible With grooved jointing face. 4 Short fittings for butt-welding
5 Stub flange short SDR 17 for FIP butterfly valve type FE and FK for butt-welding SDR 17 water 10 bar d e /DN Art. Nr. h l d 1 d 2 L 50/ / / / / / / / / / * / / * / / * * machined for free movement of disc With flat jointing face. Suitable for installation on both sides of the butterfly valve. Dimensions are adapted to the profile backing ring for stub flange. Stub flange short SDR 11 for FIP butterfly valve type FE and FK for butt-welding SDR 11 water 16 bar d e /DN Art. Nr. h l d 1 d 2 L 50/ / / / / / / / * / / * / * / * / * / * * machined for free movement of disc With flat jointing face. Suitable for installation on both sides of the butterfly valve. Dimensions are adapted to the profile backing ring for stub flange. Short fittings for butt-welding 5
6 Stub flange short SDR 17 for entrance side FIP check valve type CR and FR for butt-welding SDR 17 water 10 bar d e /DN Art. Nr. h l d 1 d 2 L 50/ / / / / / / / / / / / / / With flat jointing face. Suitable for installation on entrance side. Install stub flange extended short CR/FR on exit side. Dimensions are adapted to the profile backing ring for stub flange. Stub flange short SDR 11 for entrance side FIP check valve type CR and FR for butt-welding SDR 11 water 16 bar d e /DN Art. Nr. h l d 1 d 2 L 50/ / / / / / / / / / / / / / With flat jointing face. Suitable for installation on entrance side. Install stub flange extended short CR/FR on exit side. Dimensions are adapted to the profile backing ring for stub flange. 6 Short fittings for butt-welding
7 Stub flange extended short SDR 17 for exit side FIP check valve type CR and FR for butt-welding SDR 17 water 10 bar d e /DN Art. Nr. h l d 1 d 2 L R 50/ / / / / / / / / / With flat jointing face. Extended for free movement of disc. Suitable for installation on exit side. Install stub flange short CR/FR on entrance side. Dimensions are adapted to the profile backing ring for stub flange. Fabrication on order. Stub flange extended short SDR 11 for exit side FIP check valve type CR and FR for butt-welding SDR 11 water 16 bar d e /DN Art. Nr. h l d 1 d 2 L R 50/ / / / / / / / / / With flat jointing face. Extended for free movement of disc. Suitable for installation on exit side. Install stub flange short CR/FR on entrance side. Dimensions are adapted to the profile backing ring for stub flange. Fabrication on order. Short fittings for butt-welding 7
8 Tee 90 short SDR 33 for butt-welding SDR 33 water 3,2 bar d e Art. Nr. L Z l Tee 90 short SDR 17 for butt-welding SDR 17 water 10 bar/gas 5 bar d e Art. Nr. L Z l Short fittings for butt-welding
9 Tee 90 short SDR 11 for butt-welding SDR 11 water 16 bar/gas 10 bar d e Art. Nr. L Z l Tee 90 reduced short SDR 17 with reduced branch SDR 17 for butt-welding water 10 bar/gas 5 bar d e1 /d e2 Art. Nr. L Z l 1 l 2 110/ / / / / / / / / / / / / / to be continued -- Short fittings for butt-welding 9
10 Tee 90 reduced short SDR 11 - continuation - Tee 90 reduced short SDR 11 with reduced branch SDR 11 for butt-welding water 16 bar/gas 10 bar d e1 /d e2 Art. Nr. L Z l 1 l 2 90/ / / / / / / / / / / / / / / / / / / / Short fittings for butt-welding
11 Tee 90 reduced machined short SDR17 - pressure class conform with reduced branch SDR 17 for butt-welding water 10 bar/gas 5 bar d e1 /d e2 Art. Nr. L Z 280/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / to be continued -- Short fittings for butt-welding 11
12 Tee 90 reduced machined short SDR17 - pressure class conform - continuation - d e1 /d e2 Art. Nr. L Z 500/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Pressure rating guaranteed, branch extended with pipe. Fabrication on order, returning not possible. 12 Short fittings for butt-welding
13 Tee 90 reduced machined short SDR11 - pressure class conform with reduced branch SDR 11 for butt-welding water 16 bar/gas 10 bar d e1 /d e2 Art. Nr. L Z 280/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / to be continued -- Short fittings for butt-welding 13
14 Tee 90 reduced machined short SDR11 - pressure class conform - continuation - d e1 /d e2 Art. Nr. L Z 500/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Pressure rating guaranteed, branch extended with pipe. Fabrication on order, returning not possible. 14 Short fittings for butt-welding
15 Bend 90 short SDR 33 for butt-welding SDR 33 water 3,2 bar d e Art. Nr. Z l R R 1 x d e Bend 90 short SDR 17 for butt-welding SDR 17 water 10 bar/gas 5 bar d e Art. Nr. Z l R R 1 x d e Short fittings for butt-welding 15
16 Bend 90 short SDR 11 for butt-welding SDR 11 water 16 bar/gas 10 bar d e Art. Nr. Z l R R 1 x d e 16 Short fittings for butt-welding
17 Reducer concentric DIN short SDR 33 for butt-welding SDR 33 water 3,2 bar d e1 /d e2 Art. Nr. L l 1 l 2 200/ / / / / / / / / / / / / / / / / / Reducer concentric DIN short SDR 17 for butt-welding SDR 17 water 10 bar/gas 5 bar d e1 /d e2 Art. Nr. L l 1 l 2 50/ / / / / / / / / / / / / / / / / / / / / / / / / / / to be continued -- Short fittings for butt-welding 17
18 Reducer concentric DIN short SDR 17 - continuation - d e1 /d e2 Art. Nr. L l 1 l 2 160/ / / / / / / / / / / / / / / / / / * / * / * / * / * / * / * * machined version Reducer concentric DIN short SDR 11 for butt-welding SDR 11 water 16 bar/gas 10 bar d e1 /d e2 Art. Nr. L l 1 l 2 25/ / / / / / / / / / / / / / / / / / / / / / / / / / / to be continued Short fittings for butt-welding
19 Reducer concentric DIN short SDR 11 - continuation - d e1 /d e2 Art. Nr. L l 1 l 2 140/ / / / / / / / / / / / / / / / / / / / / / / / / * / * / * / * / * / * / * * machined version Short fittings for butt-welding 19
20 Reducer concentric short SDR 33 for butt-welding SDR 33 water 3,2 bar d e1 /d e2 Art. Nr. L l 1 l 2 355/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / * / * / * / * / * / * / * / * / * / * / * / * / * * fabrication on order, returning not possible 20 Short fittings for butt-welding
21 Reducer concentric short SDR 17 for butt-welding SDR 17 water 10 bar/gas 5 bar d e1 /d e2 Art. Nr. L l 1 l 2 355/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / * / * / * / * / * / * / * / * / * / * / * / * * fabrication on order, returning not possible Short fittings for butt-welding 21
22 Reducer concentric short SDR 11 for butt-welding SDR 11 water 16 bar/gas 10 bar d e1 /d e2 Art. Nr. L l 1 l 2 355/ / / / / / / / / / / / / / / / / / / / / / / / / / / / Short fittings for butt-welding
23 Reducer eccentric short SDR 33 for butt-welding SDR 33 water 3,2 bar d e1 /d e2 Art. Nr. L l 1 l 2 160/ / / / / / / / / / / / / / / / / / / / / / / / / / / / Larger diameters on request. Short fittings for butt-welding 23
24 Reducer eccentric short SDR 17 for butt-welding SDR 17 water 10 bar/gas 5 bar d e1 /d e2 Art. Nr. L l 1 l 2 160/ / / / / / / / / / / / / / / / / / / / / / / / / / / / Larger diameters on request. 24 Short fittings for butt-welding
25 Reducer eccentric short SDR 11 for butt-welding SDR 11 water 16 bar/gas 10 bar d e1 /d e2 Art. Nr. L l 1 l 2 160/ / / / / / / / / / / / / / / / / / / / / / / / / / / / Larger diameters on request. Short fittings for butt-welding 25
26 End cap long/short SDR 17 for butt-welding SDR 17 water 10 bar/gas 5 bar d e Art. Nr. L l * * * * * * * * * * * * * * * ** ** ** ** ** ** * long version ** short version, machined fabrication on order, returning not possible End cap long/short SDR 11 for butt-welding SDR 11 water 16 bar/gas 10 bar d e Art. Nr. L l * * * * * * * * * * * * * * * * * * * * to be continued Short fittings for butt-welding
27 End cap long/short SDR 11 - continuation - d e Art. Nr. L l ** ** ** ** * long version ** short version, machined fabrication on order, returning not possible Short fittings for butt-welding 27
28 Union complete short SDR 11 with EPDM O-ring for butt-welding SDR 11 water 6 bar d e Art. Nr. L Unions complete consist of: - PE union end and union bush - PVC nut - EPDM O-ring Depending on temperature change the maximum operating pressure can be reduced strongly. Union complete short SDR 11 with FPM O-ring for butt-welding SDR 11 water 6 bar d e Art. Nr. L Unions complete consist of: - PE union end and union bush - PVC nut - FPM O-ring Depending on temperature change the maximum operating pressure can be reduced strongly. Collectioning on order. 28 Short fittings for butt-welding
29 Union bush short SDR 11 for butt-welding SDR 11 d e Art. Nr. L l G " ¼" ½" " ¼" ¾" ½" " " Thread according to EN-ISO 228. Union end short SDR 11 for butt-welding SDR 11 d e Art. Nr. L h d 1 d ,0 30, ,5 38, ,0 44, ,5 56, ,0 62, ,0 78, ,5 96, ,5 109, ,5 134,5 Short fittings for butt-welding 29
30 Union complete long SDR 11 with EPDM O-ring SDR 11 water 6 bar d e Art. Nr. L Unions complete consist of: - PE union end and union bush - PVC nut - EPDM O-ring Depending on temperature change the maximum operating pressure can be reduced strongly. Union complete long SDR 11 with FPM O-ring SDR 11 water 6 bar d e Art. Nr. L Unions complete consist of: - PE union end and union bush - PVC nut - FPM O-ring Depending on temperature change the maximum operating pressure can be reduced strongly. Collectioning on order. 30 Short fittings for butt-welding
31 Union bush long SDR 11 SDR 11 d e Art. Nr. L l G " ¼" ½" " ¼" ¾" ½" " " Thread according to EN-ISO 228. Union end long SDR 11 SDR 11 d e Art. Nr. L h d 1 d ,0 30, ,5 38, ,0 44, ,5 56, ,0 62, ,0 78, ,5 96, ,5 109, ,5 134,5 Short fittings for butt-welding 31
32 Union nut for PE union end PVC d e Art. Nr. D G d 3 H " ¼" ½" " ¼" ¾" ½" " " Thread according to EN-ISO 228. O-ring for PE union bush EPDM d e Art. Nr. d 2 d ,8 3, ,2 3, ,5 3, ,8 5, ,2 5, ,1 5, ,8 5, ,6 5, ,7 7,0 32 Short fittings for butt-welding
33 O-ring for PE union bush FPM d e Art. Nr. d 2 d ,8 3, ,2 3, ,5 3, ,8 5, ,2 5, ,1 5, ,8 5, ,6 5, ,7 7,0 Short fittings for butt-welding 33
34 Adaptor long SDR 11 with female thread SDR 11 water 10 bar d e /R p Art. Nr. L l D SW 20/½" /½" /¾" /½" /¾" /1" /¾" /1" /1¼" /½" /1" /1¼" /1½" /2" SW = size of the jaw. Thread according to EN (ISO 7). For sealing we advise PTFE tape. Depending on assembly method and temperature change the maximum operating pressure can be reduced strongly. Adaptor short SDR 11 with male thread for butt-welding SDR 11 water 8 bar d e /R Art. Nr. L l 1 l 2 SW 20/½" /¾" /1" /1¼" /1½" /2" SW = size of the jaw. Thread according to EN (ISO 7). For sealing we advise PTFE tape. Depending on assembly method and temperature change the maximum operating pressure can be reduced strongly. For specific applications please contact our Technical Support. 34 Short fittings for butt-welding
35 Adaptor long SDR 11 with male thread SDR 11 water 10 bar d e /R Art. Nr. L l 1 l 2 SW 20/½" /¾" /1" /1¼" /1½" /2" SW = size of the jaw. Thread according to EN (ISO 7). For sealing we advise PTFE tape. Depending on assembly method and temperature change the maximum operating pressure can be reduced strongly. Short fittings for butt-welding 35
36 Stub flange long SDR 17 SDR 17 water 10 bar/gas 5 bar d e Art. Nr. h l d 1 d 2 L * * * * * * * * * machined and extended with pipe fabrication on order, returning not possible With grooved jointing face. 36 Long fittings
37 Stub flange long SDR 11 SDR 11 water 16 bar/gas 10 bar d e Art. Nr. h l d 1 d 2 L * * * * * * machined and extended with pipe fabrication on order, returning not possible With grooved jointing face. Long fittings 37
38 Tee 90 long SDR 17 SDR 17 water 10 bar/gas 5 bar d e Art. Nr. L Z l Tee 90 long SDR 11 SDR 11 water 16 bar/gas 10 bar d e Art. Nr. L Z l Long fittings
39 Tee 90 reduced long SDR 17 with reduced branch SDR 17 water 10 bar/gas 5 bar d e1 /d e2 Art. Nr. L Z l 1 l 2 63/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Long fittings 39
40 Tee 90 reduced long SDR 11 with reduced branch SDR 11 water 16 bar/gas 10 bar d e1 /d e2 Art. Nr. L Z l 1 l 2 63/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Long fittings
41 Tee 45 long SDR 17 SDR 17 water 10 bar/gas 5 bar d e Art. Nr. L l 1 Z 1 Z Tee 45 long SDR 11 SDR 11 water 16 bar/gas 10 bar d e Art. Nr. L l 1 Z 1 Z Long fittings 41
42 Elbow 90 long SDR 17 SDR 17 water 10 bar/gas 5 bar d e Art. Nr. Z l Elbow 90 long SDR 11 SDR 11 water 16 bar/gas 10 bar d e Art. Nr. Z l Long fittings
43 Elbow 45 long SDR 17 SDR 17 water 10 bar/gas 5 bar d e Art. Nr. Z l Elbow 45 long SDR 11 SDR 11 water 16 bar/gas 10 bar d e Art. Nr. Z l Long fittings 43
44 Elbow 30 long SDR 17 SDR 17 water 10 bar/gas 5 bar d e Art. Nr. Z l Elbow 30 long SDR 11 SDR 11 water 16 bar/gas 10 bar d e Art. Nr. Z l Long fittings
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.
ASME/ANSI B16.1-1998 - Cast Iron Pipe Flanges and Flanged Fittings ASME/ANSI B16.3-1998 - Malleable Iron Threaded Fittings ASME/ANSI B16.4-1998 - Cast Iron Threaded Fittings ASME/ANSI B16.5-1996 - Pipe
kymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
Style 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description
Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard
Hose and Tube Fittings Series 1-3
Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose
GD200 01 07 Valves Rubber Lined - Centric Fout! Onbekende naam voor documenteigenschap. PRODUCT DATA. General Description BUTTERFLY VALVE
DESIGN Body U section wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E Face to Face EN558-1/2 Series
2013 Edition. Flanged fittings 30"-64" NSF. industrial Applications, water & Wastewater. Certified to ANSI/NSF 61
30"-64" Ductile Iron industrial Applications, water & Wastewater 2 Table of Contents Flanged Fittings for Water 3 Flange Details 5 Flanged Fittings 6 90º and 45º Bend 6 22-1/2º and 11-1/4º Bends 7 Tees
Bypass level indicator With magnetic display Model BNA
Level measurement Bypass level indicator With magnetic display Model BNA WIKA data sheet LM 10.01 Applications Continuous level indication without power supply Indication of the level proportional to height
VdS 2100-09en. VdS Guidelines for water extinguishing systems. Non-return valves. Requirements and test methods. VdS 2100-09en : 2011-05 (01)
VdS Guidelines for water extinguishing systems VdS 2100-09en Requirements and test methods VdS 2100-09en : 2011-05 (01) Publishing house: VdS Schadenverhütung GmbH Amsterdamer Str. 172-174 50735 Köln,
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 1000 Between flanges GN10/16, ASA150 up to DN600-10 C + 110 C ( 130 C temporarily ) Max Pressure : 16 Bars up to DN300 Specifications :
INSTALLATION, OPERATION & MAINTENANCE MANUAL
INSTALLATION, OPERATION & MAINTENANCE MANUAL Flanged Disk Check Valve with Strainer Ref. GENEBRE: 2450 2451 2452 1 INSTRUCTIONS FOR INSTALLATION, OPERATION & MAINTENANCE MANUAL 1. Spare parts... 3 1.1
Stainless steel process fittings
Page 1/6 Stainless steel process fittings Installation in pipe systems Installation in tanks and vessels Hygienic version FDA conformity of materials Probe length 120 mm 120 mm Availability of various
RING JOINT SYSTEMS 207
RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI
HYDRAULIC PIPING STANDARD HANDBOOK. Revision 1
HYDRAULIC PIPING STANDARD HANDBOOK Revision 1 Preface We aim to fill a gap in technical literature. At this moment there are no hydraulic piping standards available which cover different pressure classes
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS
SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS PART 1 GENERAL 1.01 SECTION INCLUDES A. The requirements for pipe material and installation in sewer and drainage collection systems. All materials
GPD Rubber Press Seals
GPD Rubber Press Seals Leading in in ideas SYSTEM-TECHNIK GPD Rubber Press Seals Design Available with a rubber thickness of 30 mm for sealing against non-pressing water and a rubber thickness of 60 mm
Model Specification 509 DRISCOPLEX 4200 and DRISCOPLEX 4300 Gravity Flow Sanitary Sewer
Model Specification 509 DRISCOPLEX 4200 and DRISCOPLEX 4300 Gravity Flow Sanitary Sewer The user may choose to adopt part or all of this Model Specification; however, the user should ensure that all parts
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
08003-1 WATER SERVICE 2
08003_Mar08_2011.pdf Page 1 of 7 INDEX Page 08003-1 WATER SERVICE 2 1.1 Pipe 2 1.1.1 Copper 2 1.1.2 Polyethylene 2 1.2 Valves and Fittings 2 1.2.1 Main Stops 3 1.2.2 Curb Stops 3 1.2.3 Curb Box 3 1.2.4
STORAGE, INSTALLATION AND MAINTENANCE PROCEDURES
GATE VALVE O.S. & Y 1.0 Periodic Inspections 1.1 The valve stem packing should be inspected at least monthly. If the stem packing shows signs of leakage, simply tighten the adjusting nuts to compress the
倀 䰀 唀 䴀 䈀 䤀 一 䜀 刀 䄀 䤀 一 圀 䄀 吀 䔀 刀 匀 夀 匀 吀 䔀 䴀 匀
倀 䰀 唀 䴀 䈀 䤀 一 䜀 刀 䄀 䤀 一 圀 䄀 吀 䔀 刀 匀 夀 匀 吀 䔀 䴀 匀 眀 眀 眀 最 攀 渀 漀 瘀 愀 瀀 爀 漀 搀 甀 挀 琀 猀 挀 漀 洀 㠀 ⴀ 㔀 ⴀ 㜀 㐀 㠀 㠀 September 2015 R.F. Williams, Michigan Master Plumber, License No. 04287 (left) R.M. Williams, Michigan
Grooved gaskets. Types of gaskets
Types of gaskets have proven extremely useful in all areas of industry, including the most demanding sealing tasks. Our grooved gaskets can be found in conventional power plants as well as in the primary
Puddle Flange. FRANK Puddle Flange
Puddle Flange FRANK Puddle Flange The problem Problems keep on occurring when connecting pipes during construction work. Pipes laid in the ground must be introduced into concrete walls or shafts. In many
THE FIBERBOND FITTINGS GUIDE
ENGINEERED COMPOSITE PIPING SYSTEMS THE FITTINGS GUIDE FIBERBOND SERIES 20C 110FW 20HV-D www.fiberbond.com www.exelisinc.com March 2010 Edition FIBERBOND Fittings Guide PIPE SERIES: The fittings contained
08.08 Vic-Check Valves
The check valves are a product of computer-assisted innovative engineering with quality features including a new hydrodynamically efficient profile. The Vic-Check valve utilizes a spring-assisted, single-disc
Self-operated Temperature Regulators Temperature Regulator Type 1u
Self-operated Temperature Regulators Temperature Regulator Type u Application Temperature regulators for cooling installations Control thermostats for set points ) from 0 to 250 C G ½ to G or DN 5 to 50
SERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
TECHNICAL SPECIFICATION
THOMAS - G-FLEX GFLEX TECH SPEC CONNECTING INNOVATION JOHANNESBURG TEL: +27 11 794 7594 CAPE TOWN TEL: +27 21 556 5258 POLOKWANE TEL: 015 298 9142 DESIGNER, MANUFACTURER AND DISTRIBUTOR OF PIPE CONNECTION,
Water Utilities. From Applications to Products
Water Utilities From Applications to Products Table of Contents 4 5 Find Your Solution 6 7 Water Utilities 8 11 Transport Lines 12 15 Distribution Lines 16 19 Hydrants and Connections 20 25 House Connections
10 2161.002201 2161.002401 slide flange. 11 2161.001295 2161.001296 slide ring
spareparts list sparepart part No. code No. GP 40 GP 50 shaft seal 10 2161.002201 2161.002401 slide flange 11 2161.001295 2161.001296 slide ring 12 2161.001226 2161.001265 O-ring 13 5642.ABBR01 5642.ABCD01
Stainless Steel Tubular Products
Stainless Steel Tubular Products r Disclaimer This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary
C. CR: Chlorosulfonated polyethylene synthetic rubber. E. EPDM: Ethylene-propylene-diene terpolymer rubber.
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.
Caps STANDARD WEIGHT Inches / Pounds
Standard Caps you are here: Home > Weldbend Catalog > Fittings > Caps Caps STANDARD WEIGHT Inches / Pounds For Metric Units >Click Here Nominal Pipe Size Outside Inside Wall Thickness (T) Length (E) Pipe
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS The BWX series butterfly valve has been especially designed for use in cryogenic applications with high quality CrNi steel. Testing of the valve includes
Product Catalogue Australian Plumbing Fittings
Capillary Sizes ELBOWS - 90 Degree J08123 15mm x 15mm 90Deg LE Cu SR ELB F+F (No. 12) J08131 18mm x 18mm 90Deg LE Cu ELB F+F (No. 12) J08145 20mm x 20mm 90Deg LE Cu SR ELB F+F (No. 12) J08147 20mm x 15mm
Metal Pressfitting Pipe Systems
VdS Guidelines for water extinguishing systems VdS 2100-26-3en Requirements and test methods Part 3: Additional provisions for Pipe Systems made of galvanized steel VdS 2100-26-3en : 2012-04 (01) Publishing
Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 500 Between flanges ISO PN10-10 C + 90 C Max Pressure : 10 Bars up to DN 200 Specifications : Non rising stem and handwheel Bidirectional tightness
Copper Meter Resetters
Copper Meter Resetters To Set 5/8", 5/8" x 3/4", 3/4", 1", 1 1 2" & 2" Water Meters 11/12 Table of Contents Page Page Meter Resetters 5/8", 5/8" x 3/4", 3/4", & 1" Horizontal Inlet and Outlet Series 710
Stainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
EWE Ball Valve-Type Tapping Valve. EWE Ball-Type Tapping Valve. EWE GBM Tapping Valves. for water and gas
The following overview shows the different EWE tapping valves to help you to make your choice: EWE valve tapping valve for vertical tapping with operating shut-off, for all types of pipe, with external
Standard Bills of Materials Commonly Ordered Models Only
Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter
PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta
PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved
ABOUT US ABOUT PE THE DEFINITION OF POLYETHYLENE
ABOUT US ABOUT PE We have been manufacturing polyethylene (HDPE- High Density Polyethylene) pipes, fittings and Butt Welding Machines in addition to design and montage Infrastructure-Waterworks since 1994.
HK Trading Import Export e.k. is a family owned German company. Founded in 2004 HK Trading has established itself as a notable trading company.
HK Trading Import Export e.k. is a family owned German company. Founded in 2004 HK Trading has established itself as a notable trading company. Based on superb and fair business relationships to long-standing
Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
General Guidelines for Repairing Buried PE Potable Water Pressure Pipes
515 General Guidelines for Repairing Buried PE Potable Water Pressure Pipes Introduction Traditional piping systems have gasket-sealed bell and spigot joints every 20 feet, which can be a potential maintenance
Plastic tube flowmeters Series PT/PS
Plastic tube flowmeters Variable area flowmeter for liquids and gases Low cost, excellent readability and light weight Simple installation (flanged, threaded or socket ends for solvent or fusion welding
Above Ground Fittings. Below Ground Fittings. tooling
C O N T E N T S Above Ground Fittings Crimp House Entry Tee 3 Crimp House Entry Tee Body 3 Building Entry Tee 3 Factory Entry Elbow 4 Meter Box Adaptors Crimp C Clip Meter Box Adaptor 4 Crimp Stab-in Meter
Flare Fittings. The World Standard. SAE 45 Flared Fittings... D4. Inverted Flared Fittings... D14. Access Valves... D18
Flare Fittings SAE 45 Flared Fittings... 4 Inverted Flared Fittings... 14 Access Valves... 18 The World Standard Flare Fittings Flare to ale PT 48F ale Connector 481FH ale Connector AVU1 ale Connector
Appendix A: Acceptable pipe and fitting materials
Watercare Services Limited Water and Code of Practice Content from the NZS 4404:2010 Land development and subdivision infrastructure has been reproduced for use in the Infrastructure Design s Manual for
Geberit Mapress Catalogue 2008 / 2009. Valid from 1 April 2008
Geberit Mapress Catalogue 2008 / 2009 Vali from 1 April 2008 Mapress Stainless Steel Page 3 Mapress CrNi Steel Page 23 Mapress Stainless Steel silicone-free Page 25 Mapress Stainless Steel Gas Page 39
3", 4", 6" & 8" Model H Series Alarm Check Valve Installation and Maintenance Guide
", ", " & " Model H Series Alarm Check Valve Installation and Maintenance Guide 077 AIRPARK DRIVE STANDISH, MICHIGAN PHONE 99-- 00-2-0 FAX 99--92 www.globesprinkler.com OCTOBER 2 C- BULLETIN A.C.V.I.M.,
Plumbing Specialties
CORPORATE OFFICE TEL (800) 766-0076 LOCAL (323) 890-4455 FAX (323) 890-4456 WWW.SMITHCOOPER.COM Plumbing Specialties QUALITY Most manufacturing facilities are certified to ISO standards ISO Quality Plus
Plumbing Lesson Five: Pipe Fittings and Parts. Student Handouts
Lesson Five: Pipe Fittings and Parts Student Handouts Building Basics was paid for under an EL Civics grant from the U. S. Department of Education administered by the Virginia Department of Education.
Stainless Steel Valves For the Sanitary Industries
www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves
Section 3510: Reclaimed water Pipes, Valves, and Appurtenances February 11, 2011
STANDARDS AND CONSTRUCTION MANUAL : Reclaimed water Pipes, Valves, and Appurtenances February 11, 2011 PART 1 - GENERAL 1.01 SCOPE OF WORK A. These specifications cover the pipes, fittings, and appurtenances
KEYSTONE. Stainless steel hygienic butterfly valves F250 for imperial tubing F251 for metric tubing
KEYSTONE Stainless steel hygienic butterfly valves F0 for imperial tubing F for metric tubing Features Keystone technology. Quarter turn operation. Isolation or regulation control. Equal percentage characteristics.
CODES AND STANDARDS. Codes and Standards, apart from being regulations, might be considered as design aids since they provide guidance from experts.
CODES AND STANDARDS T. N. GOPINATH For scientific design of Piping Systems, selection of proper material of construction and to detail out the material specifications, knowledge of Codes and Standards
Digital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
MS-3/2009 HDPE (High Density Polyethylene) Pipe and Fittings Specification for Buried Potable Water
MS-3/2009 HDPE (High Density Polyethylene) Pipe and Fittings Specification for Buried Potable Water 105 Decker Court, Suite 825, Irving, TX 75062 P: 469-499-1044 F: 469-499-1063 www.plasticpipe.org HDPE
中 华 人 民 共 和 国 化 工 行 业 标 准
HG/T 21562 1994 HG PROFESSIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA 中 华 人 民 共 和 国 化 工 行 业 标 准 HG/T 21562-1994 Lining PTFE steel pipes and fittings 衬 聚 四 氟 乙 烯 钢 管 和 管 件 Issued on December 29, 1994
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 Application Pressure regulators for set points from 5 mbar to 28 bar Valves in nominal sizes DN 15 to 100 Nominal pressures
RMF Engineering 23 05 23
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.
Ball valve C 16 valve ball completely moulded in place, extremely low clearance volume, high k v value
Ball valve C valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and ball seat cannot be
LIST PRICE BOOK MALLEABLE CAST IRON PRESS FITTINGS FOR SCH. 10 40 BLACK & GALVANIZED STEEL PIPE
FASTLOCK fittings are not currently approved for use with gas or fire protection applications. FITTINGS FOR STEEL PIPE LIST PRICE BOOK MALLEABLE CAST IRON FITTINGS FOR SCH. 10 40 BLACK & GALVANIZED STEEL
Couplings. Drain Couplings Standard Couplings Large Diameter Couplings Adaptor Couplings Flexible Saddles Bushes
Drain Couplings Standard Couplings Large Diameter Couplings Adaptor Couplings Flexible Saddles Bushes Flex-Seal couplings meet a range of UK and international legislation requirements and quality standards
A New Improved Range of Push-fit Fittings for Cold Water Services
A New Improved Range of Push-fit Fittings for Cold Water Services A new improved range of Push-fit Fittings for Cold Water Services, with Stainless Steel Teeth to grip the pipe Push-fit Fittings for Cold
2 in1 SOL ARTUBE SIMPLE. FLEXIBLE. FAST. SPECIFICALLY TO BE USED TO INSTALL FLOW & RETURN PIPES FROM SOLAR PANEL TO STORAGE TANK
2 in1 SOL ARTUBE SIMPLE. FLEXIBLE. FAST. Flexible stainless steel pipe Solar UV resistant protective sheath Break joint for easy separation Integrated two-core sensor cable Closed cell elastomeric foam
DeZURIK 3-20" BAW AWWA BUTTERFLY VALVES WITH TRANSFER MOLDED SEAT
3-20" BAW AWWA BUTTERFLY VALVES WITH TRANSFER MOLDED SEAT Instruction D10386 August 2013 Instructions These instructions provide installation, operation and maintenance information for BAW Butterfly Valves.
GYROLOK to Tube Union
GYROLOK HOKE manufactured GYROLOK tube fittings have been carefully designed and manufactured to provide a wide range of outstanding leak-tight application capabilities. GYROLOK to Tube Union MANUFACTURED
Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP. Feed Water Connector 1. 1/2" FIP x 1/2" MIP x 1/4" OD 2. 3.
Picture Item No. Description RO- 0010 Brass Water Feed 1. 3/4" FIP with 1/4" hole 2. Using on R.O. tank RO- O020 Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP RO- 0030 Brass
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
Mechanical Products. Mechanical Products M06-1
Products Products M06-1 3 TABLE OF CONTENTS 1. GENERAL DATA... 5 10 The Engineered Coupling...6 Features & Benefits...7 ISO 9001:2000 Certificate of Registration...8 Approvals...9 Manufacturing Process...10
TYPE E Main Valve Sizes 3 /8 through 12
SD 3001F PRINTED IN U.S.A. SD 3001F/0707 A B TYPE E MAIN VALVE C D E TYPE E Main Valve Sizes 3 /8 through 12 The Spence Type E Main Valve is of normally closed, single seat design featuring packless construction,
DOUBLE CONTAINMENT DESIGN & INSTALLATION GUIDE
DC-3-0708 Spears Double Systems are engineered for ease of installation and lower associated installation costs. Complete systems include all necessary components - carrier pipe, containment pipe, centralizer
Working Pressure up to 630 bar / 9135 PSI
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30 / 931 630 / 9135
SKU: BV4262. Industrial PVC-U Screwed BSP Ball Valve
SKU: BV4262 PVC-U Screwed BSP Ball Valve PVC-U Geschraubt BSP Kugelventil Válvula de bola roscadas BSP PVC- U 1/2" 2" PVC-U Double Union Ball Valve 1/2 " - 2" PVC-U Doppel Union Kugelhahn 1/2" - 2 " Válvula
sales@fabfit.com.au TRADE PRODUCT GUIDE MAKE THE RITE CONNECTION WWW.FABFIT.COM.AU www.fabfit.com.au Page a
Page a TRADE PRODUCT GUIDE MAKE THE RITE CONNECTION WWW.FABFIT.COM.AU Manufacturers and distributors of plumbing fittings. Fabfit Certification The following trade products guide details the range of plumbing
British Standard Underground Hydrant Range
British Standard Underground Hydrant Range 2 THE NEW AVK BRITISH STANDARD HYDRANT RANGE AVK are the renowned market leading innovators, manufacturers and suppliers of BS 750 fire hydrants into the UK,
Hydraulic Jack Units. Contact Us! 888-577-EECO (3326) Delivery & Lead Times
Hydraulic Jack Units Elevator Equipment Corporation (EECO) has been manufacturing hydraulic elevator equipment since 1946, and is one of the leading suppliers in the industry for hydraulic jack units and
FLEXWELL Safety Pipe. Pipe systems for installations Technical details
Pipe systems for installations Technical details Notes 08.04.2013 T page 2 Contents 4.0 4.0 Contents 4.1 System description 4.100 System description FLEXWELL Safety Pipe 4.105 System description FLEXWELL
COPPER METER SETTERS 6-08. A.Y. McDONALD MFG. CO. WATER SERVICE PRODUCTS. TO SET 5/8", 5/8" X 3/4", 3/4", 1", 1 1/2", and 2" Water Meters
COPPER METER SETTERS TO SET 5/8", 5/8" X 3/4", 3/4", 1", 1 1/2", and 2" Water Meters A.Y. McDONALD MFG. CO. WATER SERVICE PRODUCTS 608 A.Y. M c Donald Mfg. Co. is pleased to present its extensive line
5.23.22 STEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD PART 1: GENERAL. 1.01 Purpose:
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP
ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP ARI-DP30 Pneumatic actuator Page 2 ARI-DP32 ARI-DP33 Pneumatic actuator DP-Actuator Extended stem
PTFE Lined Pipe Systems
PTFE Lined Pipe Systems RMB Products Catalog High-grade plastic lined pipe and fittings in standard sizes PTFE Lined Pipe Systems Catalog Contents General Terminology and Specifications...2 bout RMB Products...3
P.E.D. 97/23/EC/0424 Butterfly Valves Series SL, SLK Group 1-2 Class I, II, III ATEX CE Ex II 2 GD
1. GENERAL 1.1 CONSTRUCTION Small size and light construction gives advantage in installation, stocking and transporting. Sizes from DN 300 to 600 are equipped with ears, which helps the centering of the
Parts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!
Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm
EUROPEAN OEM SERVICE STAUFF. STAUFF - Line - Local solutions for individual customers worldwide
EUROPEAN OEM SERVICE STAUFF STAUFF - Line - Local solutions for individual customers worldwide STAUFF - Line - Experienced staff and precision machinery enable the manufacture of high-quality hydraulic
PVC Pipe PVC SCHEDULE 40. Nominal Pipe Size (in.) 1/8. Average I.D. O.D.
CONDENSED CATALOG PVC HPB-0-A Effective 9//97 Revised //99 CLEAR / / / / -/ -/ -/ x/ CLEAR / / / / -/ PVC SDR. PSI (Water @ 7. F.) /.0.9.0.0 PVC SDR -/ -/ -/ 0 0 PVC SCHEDULE 0.0.7.0.00..7.7.00.000.00...
Pneumatic Shut-off Butterfly Valve Type 3335/31a SRP or DAP
Pneumatic Shut-off Butterfly Valve Type 3335/31a SRP or DAP Application Tight-closing butterfly valve for process engineering and industrial applications DN 50 to 300 NPS 2 to 12 Nominal pressure PN 10
We made it carbone lorraine is now
ARMYLOR PTFE / PFA LINED PIPING AND FITTINGS ANSI B16.5 www.serviceprocess.net Service Process Equipment, Inc. PO Box 850908 Mobile AL 36685-0908 251.342.1313 Fax 251.342.1377 Email msellers@serviceprocess.net
Flow controller with integrated control valve (PN 16, 25, 40*) AFQM, AFQM 6 - return and flow mounting
Data sheet Flow controller with integrated control valve (PN 16, 5, 40*) AFQM, AFQM 6 - return and flow mounting Description AFQM 6 DN 40, 50 AFQM DN 65-15 AFQM DN 150-50 AFQM(6) is a self-acting flow
Working Pressure - Hose Ends
Working Pressure - Hose Ends The maximum dynamic working pressure of a hose assembly is the lesser of the rated working pressure of the hose and the end connection used. HIGH SPECIALTY HOSE ACCESSORRIES
SECTION 02401 - SANITARY SEWER PIPE
PART 1 - GENERAL 1.1 DESCRIPTION A. The WORK under this Section includes providing all labor, materials, tools and equipment necessary for furnishing and installing sanitary sewer pipe, in accordance with
Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes
CANTEX INC. 301 Commerce Ste 2700 Fort Worth, Texas 76102 817-215-7000 Fax: 817-215-7001 Conduit Fittings & Accessories Directional Drilling Conduit Utility Duct Telephone Duct Residential Boxes YOUR FULL
Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE