ALD Vacuum Technologies High Tech is our Business. TITANIUM Vacuum Precision Casting
|
|
- Shanon Welch
- 7 years ago
- Views:
Transcription
1 ALD Vacuum Technologies High Tech is our Business TITANIUM Vacuum Precision Casting
2 TITANIUM Vacuum Precision Casting VAR Skull Melting Cold Crucible Induction Melting Benefits of Titanium Excellent mechanical properties Low density High corrosion resistance High bio-compatibility Attractive surface design 1. Health: Implants 2. Leisure & Fun: Golf-clubs 3. Better Performance: Turbowheels 4. Environment: Automotive valves 5. Energy Savings: Turbine blades 6. Lightweight: Structural Ti parts Requirements in Melting and Casting of Titanium: Ceramic free melting: No contamination, no reaction with Oxygen Vacuum-purifying of the melt Cold Crucible Induction Melting & VAR Skull Melting from ALD Are suitable for a wide range of alloys especially reactive metals Render a high homogeneity of alloying elements Work with highest security standards Prevent the evaporation of sensitive alloying elements
3 LEICOMELT Cold Crucible Induction Melting Benefits of LEICOMELT Excellent chemical and thermal homogenization Melting of revert up to 100 % Recharging and alloying possible Better control of superheat Melting of reactive metals (e.g. Ti, Zr, Nb) as well as Ni or Co base alloys General Furnace Design Single-chamber furnace with centrifugal casting unit Easy access to cold crucible and induction coil as well as to mold table by multi door design Melting Process The cold crucible consists of several water cooled copper segments which are separated from each other by an insulating material. The electromagnetic field is induced into the Cu-crucible and from there into the charge material. Top: LEICOMELT 12 Melt unit installation and centrifuge Center: LEICOMELT 5 Horizontal chamber with two doors for best accessability of crucible and mold table Bottom: LEICOMELT Standard design (rectangular chamber with big service door and centrifuge)
4 VAR SKULL MELTER From Laboratory to Production Benefits of VAR Skull Melter Compact, space-saving and service-friendly furnace concept Reliable, easy to control process High productivity Melting of revert possible (up to 50 %) Suitable for high pouring weights General Furnace Design Single-chamber design with a centrifugal casting unit Large charging door to provide easy accessibility for cleaning and maintenance Melting Process A consumable Titanium electrode melted by an arc into a water-cooled tiltable crucible. When the desired melt level is reached the electrode is automatically raised and the liquid titanium is poured into a mold. The consumable electrode can be dimensioned for multiple pours. Top: VAR L250SM Center: VAR L500SM Bottom: VAR Skull Melter Typical Design Ti
5 TiAl Benefits of Titanium Aluminides Excellent mechanical properties at elevated temperatures Additional weight savings as compared to Titanium Intermetallic TiAl alloys are gaining importance in high-tech applications, e.g. aviation and automotive engine technologies TiAl Furnace Design For industrial use either double-chamber or single-chamber furnaces with mold heater are available Top: Double-chamber LEICOMELT 2 for TiAl automotive valves Bottom: Double-chamber LEICOMELT 5 for TiAl turbine blades TiAl
6 Comparison VAR Skull Melter Easy process control High reliability/reproducibility Electrode needn t be recharged prior each melt Feedstock: Electrodes and limited revert Energy consumption for melting: ~ 1 kwh/kg High melt rates and pouring capacities LEICOMELT Excellent thermal and chemical homogenization Better control of superheat Recharging and alloying possible Feedstock: Ingots and up to 100 % revert Energy consumption for melting: ~ 3-5 kwh/kg Medium melt rates and capacities Technical Data LEICOMELT LEICOMELT 2 LEICOMELT 5 LEICOMELT 12 LEICOMELT 26 TiAI Furnace Crucible Volume [l] Max. Melt Weight (Ti6Al4V) [kg] Melt Power Supply [kw] Max. Mold Dimensions (dxh) [mm] 500 x x x x x 800 Typical Floor Space (lxwxh) [m] 10 x 5 x x 7 x x 8 x 4 10 x 10 x x 6.5 x 5 Technical Data VAR Skull Melter L50SM L150SM L500SM L1000SM Max. Casting Weight (Ti6Al4V) [kg] Melt Power Supply Current [ka] Max. Electrode Diameter [mm] Typical Floor Space (lxwxh) [m] 10 x 8 x 7 13 x 11 x x 11 x x 15 x 12 ALD is a leader in developing and optimizing suitable Vacuum Melting and Casting Processes according to customer requirements. ALD offers all relevant Vacuum Metallurgy Processes from Vacuum Induction, Electron Beam, Electro Slag and Vacuum Arc Melting through Vacuum Precision Casting and Powder Production. For more information visit us under ALD Vacuum Technologies GmbH Wilhelm-Rohn-Strasse 35 D Hanau, Germany Phone: +49 (0) Fax: +49 (0) info@ald-vt.de Internet: China ALD Liaison Office c/o C&K Development Co., Ltd. Rm. 1102, South Office Tower Hong Kong Plaza 283 Huai Hai Zhong Rd. Shanghai, , China Phone +86 (21) ald@ald-vt.cn Far East (Japan/Korea/Taiwan) ALD Thermo Technologies Far East Co., Ltd. 10F. Shinjuku Nomura Bldg Nishi-Shinjuku, Shinjuku-Ku Tokyo , Japan Phone +81 (3) Peter.Lang@ald-vt.de Great Britain ALD Vacuum Technologies Ltd. First Floor 276 High Street Guildford, Surrey GU 1 3JL, UK Phone +44 (1483) info@aldvactech.co.uk Russia ALD Vacuumyje Technologii OOO ul. Bolschaja Ordynka 40, str Moskau, Russia Phone +7 (495) ald@metallurg.com.ru USA / Canada ALD Vacuum Technologies, Inc. 18, Thompson Road East Windsor, CT 06088, USA Phone +1 (860) info@ald-usa.com MetaCom/Titanium/06.11/
Metal Powder Technology
Metal Powder Technology Vacuum Induction Melting and Inert Gas Atomization Ceramic-Free Metal Powder Production Inert Gas Recycling 2 METAL POWDER TECHNOLOGY Metal powder technology is one of the most
More informationMetal Injection Molding (MIM) of components made of Titanium and its alloys
Metal Injection Molding (MIM) of components made of Titanium and its alloys 1 Presentation content Introduction to Metal Injection Molding (MIM) Technology - explaination Products - examples Company brief
More informationFEATURES AND BENEFITS OF DIFFERENT PLATINUM ALLOYS. Kris Vaithinathan and Richard Lanam Engelhard Corporation
FEATURES AND BENEFITS OF DIFFERENT PLATINUM ALLOYS Kris Vaithinathan and Richard Lanam Engelhard Corporation Introduction There has been a significant increase in the world wide use of platinum for jewelry
More informationHow To Write A Recipe Card
Forging stock standards guideline Issue n 10 FORGING STOCK 30 Microstructure 34 Grain size Air melted (except if δ ferrite or problem 1 per batch) 50 Cleanness/ Inclusion See EN 2157-2. 51 Macrostructure
More informationunderstanding medium frequency induction melting furnace and its components
understanding medium frequency induction melting furnace and its components 9 Spruce Street, Jersey City, NJ 07306 USA sales@electroheatinduction.com INDUCTION MELTING FURNACE AND ITS COMPONENTS The purpose
More information2015 Investor Day Summary Investor Presentation June 25, 2015
The Critical Materials Company 2015 Investor Day Summary Investor Presentation June 25, 2015 Table of Contents About AMG 4 Global Trends 5 Critical Raw Materials 6 Critical Materials Price Trends 7 Critical
More informationALUMINUM. BestPractices Assessment Case Study. Alcoa North American Extrusions Implements Energy Use Assessments at Multiple Facilities.
ALUMINUM BestPractices Assessment Case Study August 2001 OFFICE OF INDUSTRIAL TECHNOLOGIES ENERGY EFFICIENCY AND RENEWABLE ENERGY, U.S. DEPARTMENT OF ENERGY BENEFITS Assesses core systems commonly found
More informationSinterstation. Pro Direct Metal SLM System
Sinterstation Pro Direct Metal SLM System Jim Dier SLS and SLM Systems, Upper Midwest 3D Systems, Inc. 18 July 2008 Introduction Product overview Systems Sinterstation Pro DM100 SLM System Sinterstation
More informationWORKSHOP P I M. Powder Injection Moulding
WORKSHOP Mikkelissä ke 22. 5. 2013 P I M Powder Injection Moulding Definition of PIM PIM MIM Injection moulding of metal powders Wittmann Group Injection moulding of powders CIM Injection moulding of
More informationPOLYCITY. Technical measures and experiences at a 6 MW cogeneration plant with wood chip furnace POLYCITY
Technical measures and experiences at a 6 MW cogeneration plant with wood chip furnace Content 1. Technical overview cogeneration plant and heating network 2. Investment of the facility 3. Experiences
More informationCommercial Gas Furnace Upflow
Commercial Gas Furnace Upflow Model G24-200 80% A.F.U.E. 200,000 Btuh Input Heating Cap. 7.5 or 10 Tons Nominal Add-On Cooling GUK FEATURES Certified by A.G.A./C.G.A. Laboratories. Heavy gauge painted
More informationInfluence of Belt Furnace on Glass-to-Metal Seal Process
Influence of Belt Furnace on Glass-to-Metal Seal Process Introduction The glass, under suitable conditions, will bond well to a wide variety of metals and alloys which has led to the development of many
More informationHEATER SYSTEMS for Science and Semiconductor application
representing HEATER SYSTEMS for Science and Semiconductor application & Advanced Heater Systems + maintenance friendly + excellent life time + cost saving In Cooperation with Presenting Today ADVANCED
More informationLead & Magnet Wire Connection Methods Using the Tin Fusing Method Joyal A Division of AWE, Inc.
Lead & Magnet Wire Connection Methods Using the Tin Fusing Method Joyal A Division of AWE, Inc. Abstract The technology for connecting lead and magnet wires for electric motors and electro mechanical devices
More informationIWAKI MAGNETIC DRIVE PUMPS MDM. Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN
IWAKI MAGNETIC DRIVE PUMPS Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made
More informationG8 GALILEO. Innovation with Integrity. High-End Melt-extraction Analyzer. Inert Gas Method
G8 GALILEO High-End Melt-extraction Analyzer Innovation with Integrity Inert Gas Method Determination of O, N and H The market demands Metals, minerals, and inorganic compound markets demand high-quality
More informationGENERAL PROPERTIES //////////////////////////////////////////////////////
ALLOY 625 DATA SHEET //// Alloy 625 (UNS designation N06625) is a nickel-chromium-molybdenum alloy possessing excellent resistance to oxidation and corrosion over a broad range of corrosive conditions,
More informationMETALLURGICAL EVALUATION OF SPRAY DEPOSITED AND RING ROLLED IN718
Superalloys 718, 625, 706 and Derivatives 2005 Edited by E.A. Loria TMS (The Minerals, Metals & Materials Society), 2005 METALLURGICAL EVALUATION OF SPRAY DEPOSITED AND RING ROLLED IN718 Guoqing Zhang,
More informationFor Touch Panel and LCD Sputtering/PECVD/ Wet Processing
production Systems For Touch Panel and LCD Sputtering/PECVD/ Wet Processing Pilot and Production Systems Process Solutions with over 20 Years of Know-how Process Technology at a Glance for Touch Panel,
More informationCONTACT WELDING UNITS. D1Q, D2Q, D3Q Quickchange Silver graphite contact welding unit
CONTACT WELDING UNITS D1Q, D2Q, D3Q Quickchange Silver graphite contact welding unit CONTACT WELDING UNITS for industrial switchgear Ultra productive process modules Bihler contact welding units are designed
More informationPOURING THE MOLTEN METAL
HEATING AND POURING To perform a casting operation, the metal must be heated to a temperature somewhat above its melting point and then poured into the mold cavity to solidify. In this section, we consider
More informationNetShape - MIM. Metal Injection Molding Design Guide. NetShape Technologies - MIM Phone: 440-248-5456 31005 Solon Road FAX: 440-248-5807
Metal Injection Molding Design Guide NetShape Technologies - MIM Phone: 440-248-5456 31005 Solon Road FAX: 440-248-5807 Solon, OH 44139 solutions@netshapetech.com 1 Frequently Asked Questions Page What
More informationiew Your partner for induction heating systems for manual and automated solutions 22.09.2014 1
iew Your partner for induction heating systems for manual and automated solutions 22.09.2014 1 A warm welcome from Presenters: Simon RIEFLING and Dipl.-Ing. Martin SCHWEIKHART Sales Manager Germany / Managing
More informationFXA 2008. Candidates should be able to : Define and apply the concept of specific heat capacity. Select and apply the equation : E = mcδθ
UNIT G484 Module 3 4.3.3 Thermal Properties of Materials 1 Candidates should be able to : Define and apply the concept of specific heat capacity. Select and apply the equation : E = mcδθ The MASS (m) of
More informationBB-18 Black Body High Vacuum System Technical Description
BB-18 Black Body High Vacuum System Technical Description The BB-18 Black Body is versatile and is programmed for use as a fixed cold target at 80 K or variable target, at 80 K- 350 K no extra cost. The
More informationSTEEL MELT SHOP / SCRAP CONTROL & PREPARATION
THE COMPANY PROFILE Asil Celik was established in 1974 to produce special and alloyed steel mainly for the automotive industry, automotive components, machine tool manufacturing and defence industries.
More informationMetal Injection Molded Parts
Metal Injection Molded Parts Metal Injection Molding (MIM) is a powder metallurgy process. he difference between MIM and conventional powder metallurgy is that in MIM, metal powder along with binders is
More informationSURFACE MODIFICATION OF METAL IMPLANTS WITH PLASMA SPRAYED LAYERS
SURFACE MODIFICATION OF METAL IMPLANTS WITH PLASMA SPRAYED LAYERS Prof. János Takács Budapest University of Technology and Economics (BME) Ozsváth Péter MSc Budapest University of Technology and Economics
More informationThink precision, Think HSS REAMING
Think precision, Think HSS REAMING SUMMARY REAMING TOOLS 2 Zoom on a reamer 3 Which HSS for maximum efficiency? 4 Coatings for the best performance 5 Vocabulary 6 Choose the right design 7 Types of bevel
More informationCasting. Training Objective
Training Objective After watching the program and reviewing this printed material, the viewer will learn the essentials of the various metal casting processes used in industry today. The basic principles
More informationGAS EXTINGUISHING SYSTEMS INERT GAS EXTINGUISHING SYSTEMS. Argotec Liquid Argon Gas Extinguishing Technology (LAR)
GAS EXTINGUISHING SYSTEMS INERT GAS EXTINGUISHING SYSTEMS Argotec Liquid Argon Gas Extinguishing Technology (LAR) INNOVATION modern technologie snuffed out cold Argotec liquid argon gas ex tinguishing
More informationEBM Inside. Additive Manufacturing of orthopedic implants
EBM Inside Arcam provides a cost-efficient Additive Manufacturing solution for production of implants. Arcam s EBM technology is used for production of FDA-cleared and CE-certified orthopedic implants.
More informationNu G Medical Waste System Technology (Pyrolysis / Thermal Decomposition)
Product Description: Nu G Medical Waste System Technology (Pyrolysis / Thermal Decomposition) The NU G System uses pyrolysis thermal decomposition to treat infectious wastes typically generated in hospitals.
More informationproducer of zinc, aluminium, magnesium die casting and plastic moulding
producer of zinc, aluminium, magnesium die casting and plastic moulding FAM Technika Odlewnicza is a modern producer of zinc, aluminium, magnesium die casting and plastic moulding. The Company is one of
More informationHMHF DIRECT DRIVE BELT DRIVE. Manufactured by UDY Corporation. Cyclone Models Available:
Cyclone Models Available: HMHF DIRECT DRIVE BELT DRIVE INITIAL PARTICLE SIZE: MATERIALS MILLABLE: PARTICLE SIZE GENERATED: SAMPLE FEED INTO THE MILL: SAMPLE MILL GRINDING CHAMBER: GRINDING RATE AND COLLECTION
More informationArticle no. 2: METEC 2015 (business) Promising outlook for metals: More than 3,500 different types of steel around the world
Article no. 2: METEC 2015 (business) Promising outlook for metals: More than 3,500 different types of steel around the world Strong demand for copper in car manufacturing and medical engineering: conductive
More informationHelmholtz-Alliance LIMTECH. page 1
Helmholtz-Alliance LIMTECH page 1 C1: Magnetic flow control in growth and casting of photovoltaic silicon (HZDR, TUBAF) Solidification of Solar-Si Si-crystal growth by Czochralski (Cz) directional solidification
More informationEcoCWave. The all-round talent for aqueous part cleaning. www.durr.com
EcoCWave The all-round talent for aqueous part cleaning www.durr.com Part cleaning as a value-adding value-adding process process Increasing demands on cleanliness in component manufacturing impose a need
More informationETC -SV. Class 0 oil-free compressed air through catalysis
Innovation QUALITy Reliability Worldwide ETC -SV Class 0 oil-free compressed air through catalysis The way to oil-free compressed air The ETC operating principle Through the process of catalytic oxidation,
More informationHow implant manufacturers use Additive Manufacturing to reduce production costs and increase profits
Electron Beam Melted (EBM ) Ti-based medical implants or How implant manufacturers use to reduce production costs and increase profits 2011-12-13 1 Arcam Swedish innovation from the beginning of the 1990
More information8-bit Atmel Microcontrollers. Application Note. Atmel AVR211: Wafer Level Chip Scale Packages
Atmel AVR211: Wafer Level Chip Scale Packages Features Allows integration using the smallest possible form factor Packaged devices are practically the same size as the die Small footprint and package height
More informationELECTRIC KETTLES AND MELTERS
ELECTRIC FURNACES ELECTRIC OVENS KETTLES & MELTERS Designing and Manufacturing Electrically Heated Process Equipment SINCE 1927 F&F HEATING ELEMENTS & RACKS ELECTRIC KETTLES AND MELTERS PLUG HEATERS ELECTRIC
More informationHOW CAST GOLD BARS ARE MANUFACTURED
TECHNICAL REPORT Supplement 2014 HOW CAST GOLD BARS ARE MANUFACTURED BACKGROUND INFORMATION Cast gold bars are normally produced directly from gold that has been melted. However, the way in which melted
More informationCelCulture. CelCulture CO2 Incubator Model CCL-170_-_. CO2 Incubator with Integrated Cooling System Solution for Highly Specialized Applications
1 CO2 Incubator Model CCL-170_-_ CO2 Incubator with Integrated Cooling System Solution for Highly Specialized Applications Welcome to Esco Esco s Vision is to provide enabling technologies for scientific
More informationVacuum drying oven for non-flammable solvents
VD series 53 Vacuum drying ovens Vacuum drying oven for non-flammable solvents A BINDER vacuum drying oven of the VD series is impressive while gently drying with its homogeneous temperature distribution.
More informationThe soot and scale problems
Dr. Albrecht Kaupp Page 1 The soot and scale problems Issue Soot and scale do not only increase energy consumption but are as well a major cause of tube failure. Learning Objectives Understanding the implications
More informationPLATE HEAT EXCHANGER. Installation Manual. Customer Name: Serial number: Purchase order number: Project:
PLATE HEAT EXCHANGER Installation Manual Customer Name: Serial number: Purchase order number: Project: Table of Contents ----------------------------------------------------------------- Page: 2 3 Name
More informationMOLECULAR DRAG PUMPS MDP SERIES
MOLECULAR DRAG PUMPS MDP SERIES MOLECULAR DRAG PUMPS MDP SERIES If you need: to replace a rotary vane pump with a dry pump for an application at 10-3 a turbopump that can operate up to 10 a pump that can
More informationGlossary of Heating, Ventilation and Air Conditioning Terms
Glossary of Heating, Ventilation and Air Conditioning Terms Air Change: Unlike re-circulated air, this is the total air required to completely replace the air in a room or building. Air Conditioner: Equipment
More informationVoltage Current volume. 24 V DC 4.5 A 330 m 3 /hr 3000 W - 4176 W
s MEV Dash version Concealed version Voltage Current Air heat cool MEV 6.0001 MEV 6.0002 MEV 6.0003 MEV 6.0004 MEV 6.0005 MEV 6.0006 MEV 6.0007 MEV 6.0008 MEV 6.0009 MEV 6.0010 MEV 6.0011 MEV 6.00 MEV
More informationEffect of Hydrogenation Pressure on Microstructure and Mechanical Properties of Ti-13Nb-13Zr Alloy Produced by Powder Metallurgy
Materials Science Forum Vols. 660-661 (2010) pp 176-181 Online available since 2010/Oct/25 at www.scientific.net (2010) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/msf.660-661.176
More informationStudy on Performance Evaluation of a Split Air Conditioning System Under the Actual Conditions
Purdue University Purdue e-pubs International Refrigeration and Air Conditioning Conference School of Mechanical Engineering 2006 Study on Performance Evaluation of a Split Air Conditioning System Under
More informationAluminium Technology & Production in Russia
L Aluminium Technology & Production in Russia Victor Mann, Deputy General Manager, s Construction Division Soderberg technology Over 80% of aluminium in Russia is manufactured on the basis of Soderberg
More informationTable of content. L81/RITA high speed Thermo Balance. Quattro Dilatometer. L75/1250/B/S Macro Dilatometer. New air cooled furnace program
THERMAL TRENDS 2 Table of content L75/SDC simultaneous-dilatometer/calorimeter L75/SDD simultaneous Dilatometer/DTA L81/RITA high speed Thermo Balance Quattro Dilatometer L75/1250/B/S Macro Dilatometer
More informationPOTENTIAL1 PROBLEMS AND INNOVATIONS OF PLASMA HEAT APPLICATIONS IN THE METALLURGICAL INDUSTRY
Pure & Appi. Chern., Vol. 56, No. 2, pp. 209 214, 1984. Printed in Great Britain. 00334545/84 $3.OO+O.OO Pergamon Press Ltd. 1984 IUPAC POTENTIAL1 PROBLEMS AND INNOVATIONS OF PLASMA HEAT APPLICATIONS IN
More informationHeat Pipe Selection Revision 12/04/2001
Heat Pipe Selection Revision 12/04/2001 Heat pipes are being used very often in particular applications when conventional cooling methods are not suitable. Once the need for heat pipe arises, the most
More informationSummary of Emerging Titanium Cost Reduction Technologies
Summary of Emerging Titanium Cost Reduction Technologies A Study Performed For US Department of Energy And Oak Ridge National Laboratory Subcontract 4000023694 By: 10917 SE Burlington Dr. Vancouver, WA
More informationWelding of Plastics. Amit Mukund Joshi. (B.E Mechanical, A.M.I.Prod.E)
Welding of Plastics Amit Mukund Joshi (B.E Mechanical, A.M.I.Prod.E) Introduction Mechanical fasteners, adhesives, and welding processes can all be employed to form joints between engineering plastics.
More informationitaltec PRINTED CIRCUITS EQUIPMENT PRINTED CIRCUITS EQUIPMENT Insulator machines Echting machines Special equipment and machines
PRINTED CIRCUITS EQUIPMENT PRINTED CIRCUITS EQUIPMENT Insulator machines Echting machines Special equipment and machines On customer request it is possible to supply: Benches for PCB Oven for PCB Chemicals
More informationXFA 600 Thermal Diffusivity Thermal Conductivity
XFA 600 Thermal Diffusivity Thermal Conductivity Thermal Diffusivity, Thermal Conductivity Information of the thermo physical properties of materials and heat transfer optimization of final products is
More informationINTEC Engineering GmbH Heating Solutions for the Marine Industry
INTEC Engineering GmbH Heating Solutions for the Marine Industry Thermal Oil Heaters Heating Solutions for the Marine Industry Compared to conventional plants using hot water or steam, thermal oil as a
More informationType: DILM50(230V50HZ,240V60HZ) Article No.: 277830
Type: DILM50(230V50HZ,240V60HZ) Article No.: 277830 Ordering information Rated operational current AC 3 400 V I e A 50 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase
More informationElements of Energy Efficiency in Data Centre Cooling Architecture
Elements of Energy Efficiency in Data Centre Cooling Architecture Energy Efficient Data Center Cooling 1 STULZ Group of Companies Turnover 2006 Plastics Technology 400 Mio A/C Technology 200 Mio Total
More informationTechnology Metals Advanced Ceramics. High Performance Solutions with MP35N Alloy
Technology Metals Advanced Ceramics High Performance Solutions with MP35N Alloy 2 Our Commitment to Engineering Excellence H.C. Starck delivers superior quality with material consistency and product reliability.
More informationCrystal Structure of Aluminum, Zinc, and their Alloys By: Omar Fajardo Sebastian Henao Devin Baines ENGR45, F2014, SRJC
Crystal Structure of Aluminum, Zinc, and their Alloys By: Omar Fajardo Sebastian Henao Devin Baines ENGR45, F2014, SRJC Purpose The purpose of this experiment was to examine and observe the microstructure
More informationMaterial data sheet. EOS Aluminium AlSi10Mg_200C. Description
EOS Aluminium AlSi10Mg_200C All information in this data sheet refers to the alloy EOS Aluminium AlSi10Mg_200C. This alloy is formed when the powder EOS Aluminium AlSi10Mg is processes at a building platform
More informationNominal Life Expectancy for Building Components
Nominal Life Expectancy for Building Components Building System Page A. HVAC 2 B. Elevator/Escalator 6 C. Plumbing 7 D. Roofing 8 E. Electrical 10 F. Fire/Life/Safety/Security System 11 G. Interior Finishes
More informationCONTENTS. ZVU Engineering a.s., Member of ZVU Group, WASTE HEAT BOILERS Page 2
WASTE HEAT BOILERS CONTENTS 1 INTRODUCTION... 3 2 CONCEPTION OF WASTE HEAT BOILERS... 4 2.1 Complex Solution...4 2.2 Kind of Heat Exchange...5 2.3 Heat Recovery Units and Their Usage...5 2.4 Materials
More informationPractical Examples of Heat Regenerative System at Steelmaking Works
2nd India-Japan Energy Forum Practical Examples of Heat Regenerative System at Steelmaking Works On Monday 4 February 2008 in Delhi Nisshin Steel Co., Ltd. Yukio Tomita 1 Structure of the Regenerative
More informationa. Are the foundry s employees trained and familiar with portions of the system applicable to their position?
1. Does the foundry have a documented quality system? a. Are the foundry s employees trained and familiar with portions of the system applicable to their position? b. What recognized quality management
More informationFeasibility of Ti-alloy Deoxidation by Reactive Slag Remelting
Feasibility of Ti-alloy Deoxidation by Reactive Slag Remelting Feasibility of Ti-alloy Deoxidation by Reactive Slag Remelting Dipl.-Ing. J. Reitz, Dipl. Wirt.-Ing. M. Weber, M.; Prof. Dr.-Ing. B. Friedrich
More informationPowder Injection Moulding (PIM) of Dissimilar Materials and Complex Internal Features
Powder Injection Moulding (PIM) of Dissimilar Materials and Complex Internal Features Li Tao, Scientist II Metal&Ceramic Team, Forming Technology Group, (SIMTech) Tel: 67938968 Email: tli@simtech.a-star.edu.sg
More informationSteel production. Furnace linings made from carbon and graphite are applied for the production of primary iron.
Steel production Furnace linings made from carbon and graphite are applied for the production of primary iron. Graphite electrodes and nipples (connecting pins) are applied for the production of steel.
More informationTechnical Concept. Filter Fan Unit COMPACT. Type COMPACT AC Type COMPACT EC
Technical Concept Filter Fan Unit COMPACT Type COMPACT AC Type COMPACT EC Ultra Filter Fan Unit COMPACT Technical Concept Product Description Filter Fan Units (FFUs) from M+W Products are designed to provide
More informationDetermination of the heat storage capacity of PCM and PCM objects as a function of temperature
Determination of the heat storage capacity of PCM and PCM objects as a function of temperature E. Günther, S. Hiebler, H. Mehling ZAE Bayern, Walther-Meißner-Str. 6, 85748 Garching, Germany Outline Introduction
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationSpecials. www.ika-apparatuur.nl. designed. 3rd edition 2015 English. for scientists 1
Specials www.ika-apparatuur.nl 3rd edition 2015 English designed for scientists 1 IKA Specials Quarterly Campaign III Three is a charm With over 100 years of experience, IKA continues to strive for delivering
More informationChapter 5 POWDER-BASED RAPID PROTOTYPING SYSTEMS
Chapter 5 POWDER-BASED RAPID PROTOTYPING SYSTEMS 5.1 3D SYSTEMS SELECTIVE LASER SINTERING (SLS) 5.1.1 Company 3D Systems Corporation was founded by Charles W. Hull and Raymond S. Freed in 1986. The founding
More informationSilicone oil is as the medium and the drying effect is uniform. The Temperature error is less than or equal 1.
Characteristic: The process of pre-freezing and drying finishes in situ. The freeze dryer is equipped with observation windows and the drying process is intuitive. Silicone oil is as the medium and the
More informationFVA/A1 saturated-steam sterilizer
FVA/A1 where technology innovation and design come together FVA/A1 saturated-steam sterilizer www.fedegariautoklaven.ch Fedegari's new FVA/A1 series of automatic vertical sterilizers has been expressly
More informationBRIEF PROJECT PROFILE ON WELDING ELECTRODE MANUFACTURING. Turn key project suppliers EUREKA SYSTEMS AND ELECTRODES PVT.LTD.
BRIEF PROJECT PROFILE ON ELECTRODE MANUFACTURING Turn key project suppliers EUREKA SYSTEMS AND ELECTRODES PVT.LTD. M A C H I N E R Y D I V I S I O N 11/15A, SELVARAJAPURAM, CHINTHAMANI PUDUR COIMBATORE
More informationType: DILM9 10(24VDC) Article No.: 276705
Type: DILM9 10(24VDC) Article No.: 276705 Ordering information Rated operational current AC 3 400 V I e A 9 Max. rating for three phase motors, 50 60 Hz AC 3 230 V Max. rating for three phase motors, 50
More informationAutomotive Application Questionnaire for Electronic Control Units and Sensors. Electronic Components and Systems
Automotive Application Questionnaire for Electronic Control Units and Sensors Electronic Components and Systems Automotive Application Questionnaire for Electronic Control Units and Sensors Published by:
More informationOutline of a quality system and standard for the certification of conformity
Outline of a quality system and standard for the certification of conformity Although still in early steps, novel Additive Manufacturing (AM) processes are growing in expectations as enabling technology
More informationHigh Capacity Hot Air Dryer
High Capacity Hot Air Dryer MADE IN AUSTRIA autumn 2015 www.zimmer-austria.com page 1 Hot air dryer type: Compact HC The modular construction of the high efficiency and powerful hot air nozzle dryer is
More informationT 300 Tray sealer. Automatic tray packaging in the smallest of spaces
T 300 Tray sealer Automatic tray packaging in the smallest of spaces MULTIVAC T 300 T 300 Tray sealer: Automatic tray packaging in the smallest of spaces The especially compact T 300 tray sealer packs
More informationDIE CASTING. This process if for high volume, high detail, and value added economically priced cast parts. HOW IT WORKS
DIE CASTING PROCESS This process if for high volume, high detail, and value added economically priced cast parts. HOW IT WORKS A metal tool is built and attached to a furnace of molten metal Then molten
More informationTRITON CPM. Cylinder Pressure Control & Monitoring. Replaces mechanical indicators on diesel engines. Helps to improve combustion
TRITON CPM Cylinder Pressure Control & Monitoring Electronic Cylinder Pressure Indicator Pressure Sensors for Combustion Control Visualisation Marine Portable Case Replaces mechanical indicators on diesel
More informationRPV - RP - RA air handling units
APPLICATIONS Heating, ventilation, cooling >> FACTORIES >> WAREHOUSES >> HALLS >> DISTRIBUTION CENTRES >> COMMERCIAL PREMISES >> PLACES OF WORSHIP RPV - RP - RA air handling units www.reznor.eu RPV - RP
More informationThe Rotavapor RII a high quality key product
Rotavapor R II en The Rotavapor RII a high quality key product Vacuum distillation is the most frequently used method of thermal separation. For small quantities the principle of rotary evaporation is
More informationInsertion Devices Lecture 4 Permanent Magnet Undulators. Jim Clarke ASTeC Daresbury Laboratory
Insertion Devices Lecture 4 Permanent Magnet Undulators Jim Clarke ASTeC Daresbury Laboratory Introduction to Lecture 4 So far we have discussed at length what the properties of SR are, when it is generated,
More informationSF 6 Gas Insulated Switchgear Type SDF for 170 kv
Three Phase Encapsulated Type SF 6 Gas Insulated Switchgear Type SDF for 170 kv 06B1-E-0001 With Trustworthy Technology, Structure Fuji Electric as a manufacturer of comprehensive substation equipment
More informationAppendice Caratteristiche Dettagliate dei Materiali Utilizzati
Appendice Caratteristiche Dettagliate dei Materiali Utilizzati A.1 Materiale AISI 9840 UNI 38NiCrMo4 AISI 9840 Steel, 650 C (1200 F) temper, 25 mm (1 in.) round Material Notes: Quenched, 540 C temper,
More informationSulfur Tail Gas Thermal Oxidizer Systems By Peter Pickard
Sulfur Tail Gas Thermal Oxidizer Systems By Peter Pickard Introduction SRU s (Sulfur Recovery Units) are critical pieces of equipment in refineries and gas plants. SRUs remove sulfur compounds from certain
More informationInternational Telecommunication Union SERIES L: CONSTRUCTION, INSTALLATION AND PROTECTION OF TELECOMMUNICATION CABLES IN PUBLIC NETWORKS
International Telecommunication Union ITU-T TELECOMMUNICATION STANDARDIZATION SECTOR OF ITU Technical Paper (13 December 2013) SERIES L: CONSTRUCTION, INSTALLATION AND PROTECTION OF TELECOMMUNICATION CABLES
More informationProducts. EschmannStahlGrades Plastic Mould Steel Hot Work Tool Steel Cold Work Tool Steel Overview
Products EschmannStahlGrades Plastic Mould Steel Hot Work Tool Steel Cold Work Tool Steel Overview High quality, Comprehensive and applicationoriented We Have the Right Solution High Quality and Quickly
More informationProduct Summary. KLIMA 1 Catalogue KLIMA 2 Catalogue FILTER Catalogue. The art of handling air. Special leaflet SP/1/EN/7
Product Summary KLIMA 1 Catalogue KLIMA 2 Catalogue FILTER Catalogue The art of handling air Special leaflet SP/1/EN/7 Components and systems for ventilation and air conditioning C As an internationally
More informationEngineering Materials Research /DEVISER/
DEVelopment of Infrastructure for Smart Engineering Materials Research /DEVISER/ A Czech structural funds project aimed for building a new public research infrastructure called Laboratory of Functional
More informationScrew Plug Immersion Heaters
Immersion Heaters Overview Immersion Heaters consist of hairpin bent tubular elements brazed or welded into a screw plug and provided with terminal enclosures for electrical connections. Immersion Heaters
More informationInjection molding equipment
Injection Molding Process Injection molding equipment Classification of injection molding machines 1. The injection molding machine processing ability style clamping force(kn) theoretical injection volume(cm3)
More information