Norgips Standard type A (STD) Product

Transcription

1 1114 Ver. 2:214 ENVIRONMENTAL PRODUCT DECLARATION In accordance with ISO 1425 ISO 2193 EN 1584 Publisher Declaration number Issue date Valid to epd-norge logo The Norwegian EPD Foundation NEPD113E - Updated Norgips Standard type A (STD) Product NEPD113E - Updated Norgips Standard type A (STD) 1

2 General information Product Norgips Standard type A (STD) Contact person: Johan Arvidsson Phone: Johan.Arvidsson@norgips.com Program holder The Norwegian EPD Foundation Post Bo 525 Majorstuen, 33 Oslo Phone: post@epd-norge.no Manufacturer Declaration number: NEPD113E - Updated Place of production:, Svelvik This declaration is based on Product Category Rules: EN 1584:212+A1:213 serve as core PCR NPCR 1:213 rev 1, PCR for Building boards Management system: Declared unit: Org. No: NO MVA Declared unit with option: Issue date Functional unit: 1 m2 of installed plasterboard used for walls, during 6 years Valid to The EPD has been worked out by: Comparability: EPD of construction products may not be comparable if they not comply with EN 1584 and seen in a building contet. Postboks 655 Strømsø 33 Drammen Mie Vold Year of study: 214 Verification: Independent verification of data, other environmental information and EPD has been carried out in accordance with ISO1425, and eternally Approved internally Research Scientist, Erik Svanes (Independent verifier approved by EPD Norway) Functional unit 1 m2 of installed plasterboard used for walls, during 6 years Key environmental indicators Global warming Energy use Dangerous substances Recycled raw materials Cradle to gate A1A3 2,1 CO2 -eqv 41,2 * 8,9 % 99, A4,36 5,6 Module D MND * The product contains no substances from the REACH Candidate list or the Norwegian priority list NEPD113E - Updated Norgips Standard type A (STD) 2

3 Product Product description: Gypsum plasterboard composed of a plaster core encased in and firmly bonded to paper liners. The front and back paper liners are overlapped and glued together on the backside of the board. The product is particularly suitable for the cladding of internal walls, ceilings and partitions in all types of buildings. The board is classified for use in fire-rated construction and will provide very good sound insulation. Technical data: The product is in compliance with EN 52 Weight: 9, /m2 ± 2 %, Thickness: 12,5 mm ±,5 mm For more information from the product data sheet, see / Market: Norway and Sweden Product specification Materials (ecl water) Gypsum (REA) Cardboard Glass fibre reinforcement Div additives (total) Totalt 8,6,3,1,8 9 % 95,4 3,6,1,9 1 Reference service life: 6 years LCA: Calculation rules Functional unit: 1 m2 of installed plasterboard used for walls, during 6 years System boundary: Industrial gypsum and recycled gypsum are mied and dried before the miture is calcined. The calcined gypsum is transferred to the mier where water and additives are added. The slurry is distributed to a plasterboard liner where the edges are folded and a new layer of plasterboard liner is glued on to form a sandwich. The board line is continuous transferred along the production line, cut to suitable lengths and dried in a kiln. The dried boards are cut to the correct lengths and stacked in pallets. Scenarios for user phase (B1-B7) and end of life (C1-C4) are decribed in scenarios below Data quality: Specific data for products and mass flows are from 213. Data sources: Ecoinvent 2.2/SimaPro software (generic). Ecoinvent 2.2 processes are created Upstream data for raw materials are significant for the LCA results in this study; these are modelled using Ecoinvent processes. EcoInvent 2.2 is used since EcoInvent 3 had important data gaps when the assessment was completed. Impact assessment methods are in accordance with EN 1584:212 + A1:213 Allocation: The allocation is made in accordance with the provisions of EN Incoming energy and water and waste production in-house production is allocated equally among all products through mass allocation. Effects of primary production of recycled materials allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. Also production processes for raw materials and energy flows that are included with very small amounts (<1%) are included. NEPD113E - Updated Norgips Standard type A (STD) 3

4 All major raw materials and all the essential energy is included. Also production processes for raw materials and energy flows that are included with very small amounts (<1%) are included. LCA: Scenarios and additional technical information The following information describe the scenarios in the different modules of the EPD. from production place to user (A4) of building products from manufacturer to building site (distance estimated to 36 km) Type Truck Railway Boat Capacity utilisation (incl. return) % Average European capacity utilisation Type of vehicle Lorry >32 metric ton Distance km Fuel/Energy consumption 36,2 l/tkm kwh/tkm l/tkm (l/t) 7,6 Installation in the building (A5) Data on energy consumption on the building site is based on lifting the board into the building information given by. An average energy consumption value of,121 /m² (3*1-4 kwh/m 2 ) shall be applied. It is assumed 5% loss in implementation. Auiliary Water consumption Electricity consumption Other energy carriers Material loss Output materials from waste treatment Dust in the air m3 kwh 3E-4,45,45 User phase B1-B7 All modules in user phase have been assessed, but the product will not need maintenance, repair or replacement during the user phase. Therfor the environmental impact for the user phase is zero. Replacement cycle* Electricity consumption Replacement of worn parts kwh 1 * Number or RSL (Reference Service Life) End of Life (C1, C3, C4) When the product is discarded and its original function is lost, it can be processed further in a waste management system. The flows of the recycled material will then become inputs into the production of the net product. For Norgips building boards it has been assumed that 4 % of all materials from demolition will be reused/recycled and the rest will be sent to disposal. Hazardous waste disposed Collected as mied construction waste Reuse Recycling Energy recovery To landfill 3,6 5,4 to waste processing (C2) Type Capacity utilisation (incl. return) % Truck Railway Boat Average European capacity utilisation Type of vehicle Lorry >32 metric ton Distance km Fuel/Energy consumption 5,2 /tkm 1,2 kwh/tkm l/tkm (l/t) Additional technical information NEPD113E - Updated Norgips Standard type A (STD) 4

5 LCA: Results All modules from rawmaterial production to end of life are included. The modules in user phase have no impacts since nothing happens during user phase. System boundaries (X=included, MND=module not declared, MNR=module not relevant) Product stage Construction installation stage Use stage End of life stage Beyond the system boundaries Raw materials Manufacturing Construction installation stage Use Maintenance Repair Replacement Refurbishment Operational energy use Operational water use De-construction demolition Waste processing Disposal Reuse-Recovery- Recycling-potential A1 A2 A3 A4 A5 B1 B2 B3 B4 B5 B6 B7 C1 C2 C3 C4 D MND Environmental impact Parameter A1-A3 A4 A5 B1-B7 C1 C2 C3 C4 GWP CO 2 -ekv 2,1,36 1,2E-5 1,22E-5,48,39 ODP CFC11-ekv 1,4E-7 5,9E-8 9,E-13 9,E-13 7,9E-9 1,1E-8 POCP C 2 H 4 -ekv 2,5E-4 4,7E-5 1,8E-9 1,8E-9 6,3E-6 8,4E-6 AP SO 2 -ekv 1,8E-3 3,9E-4 1,6E-8 1,6E-8 4,1E-5 5,6E-5 EP PO 3-4 -ekv 4,4E-3 1,4E-3 3,7E-8 3,7E-8 1,5E-4 2,3E-4 ADPM Sb-ekv 1,4E-6 1,1E-6 4,3E-11 4,3E-11 1,4E-7 4,1E-8 ADPE 38 5,4 1,3E-4 1,3E-4,72,95 GWP Global warming potential; ODP Depletion potential of the stratospheric ozone layer; POCP Formation potential of tropospheric photochemical oidants; AP Acidification potential of land and water; EP Eutrophication potential; ADPM Abiotic depletion potential for non fossil resources; ADPE Abiotic depletion potential for fossil resources Resource use Parameter RPEE RPEM TPE NRPE NRPM TRPE SM RSF NRSF W m 3 A1-A3 A4 A5 B1-B7 C1 C2 C3 C4 2,9,77 1,2E-3 1,2E-3,1 7,9E-3,3 7,9E-3 3,9E-5 3,9E-5 1,4E-3 7,9E-4 3,2,85 1,3E-3 1,3E-3,1 8,7E-3 38,16 5,56, 1,7E-4 1,7E-4,74, ,6 1,7E-4 1,7E-4,74,96 9,3-4,3E-3,12 1,1E-5 1,7E-3 1,9E-7 2,3E-4 RPEE Renewable primary energy resources used as energy carrier; RPEM Renewable primary energy resources used as raw materials; TPE Total use of renewable primary energy resources; NRPE Non renewable primary energy resources used as energy carrier; NRPM Non renewable primary energy resources used as materials; TRPE Total use of non renewable primary energy resources; SM Use of secondary materials; RSF Use of renewable secondary fuels; NRSF Use of non renewable secondary fuels; W Use of net fresh water End of life - Waste Parameter A1-A3 A4 A5 B1-B7 C1 C2 C3 HW 3,8E-5 6,4E-6 4,6E-1 4,6E-1 8,5E-7 3,9E-7 NHW,43 6,5E-2 1,5E-5 1,5E-5 8,6E-3 5,4 RW N/A N/A N/A N/A N/A N/A N/A HW Hazardous waste disposed; NHW Non hazardous waste disposed; RW Radioactive waste disposed C4 3,9E-7 5,4 N/A End of life - Output flow Parameter A1-A3 A4 A5 B1-B7 C1 C2 C3 C4 CR MR,18 3,6 MER 1,6E-5 EEE ETE CR Components for reuse; MR Materials for recycling; MER Materials for energy recovery; EEE Eported electric energy; ETE Eported thermal energy Reading eample: 9, E-3 = 9,*1-3 =,9 NEPD113E - Updated Norgips Standard type A (STD) 5

6 Additional Norwegian requirements Electricity The following data from ecoinvent v2 for Norwegian production mi included import,electricity, medium voltage, at grid/kwh/no/s. import, production of transmission lines, in addition to direct emissions and loss in grid are included. Characterisation factors stated in EN 1584:212+A1:213 are used. Greenhouse gas emissions: 36,4 g CO2 eqv/ Dangerous substances None of the following substances have been added to the product: Substances on the REACH Candidate list (per ) of substances of very high concern or substances on the Norwegian Priority list (per ) or substances that lead to the product being classified as hazardous waste. The chemical content of the product complies with regulatory levels as given in the Norwegian Product Regulations. to building site is in accordance with scenario description A4 36 km Indoor environment TVOC Formaldehyde Ammonia Carcinogenic compounds Classified as category <1 <1 22 <2 M1 µg/m2h Measured after 3 days µg/m2h µg/m2h µg/m2h Classification according to EN 15251:27 Noise No information db(a) * Emissions are measured for Norgips Plasterboard 13 Type A (STD), report from SP Carbon footprint Carbon footprint has not been worked out for the product. Bibliography ISO 1425:26 Environmental labels and declarations - Type III environmental declarations - Principles and procedures ISO 1444:26 Environmental management - Life cycle assessment - Requirements and guidelines EN 1584:212 + A1:213 Sustainability of construction works - Environmental product declaration - Core rules for the product category of construction products ISO 2193:27 Sustainability in building construction - Environmental declaration of building products PCR NPCR 1:213 rev 1, PCR for Building boards, Vold, M, 214 Livsløpsdata for Gipsplater fra Norgips, Barunnsdata for miljødeklarasjon (EPD),Østfoldforskning, OR 27.14, Fredrikstad NEPD113E - Updated Norgips Standard type A (STD) 6

7 epd-norge logo Program holder and publisher The Norwegian EPD Foundation Post Bo 525 Majorstuen, 33 Oslo Norway Postboks 655 Strømsø 33 Drammen Author of the Life Cycle Assessment Mie Vold Ostfoldforskning AS Stadion 4, 1671 Kråkerøy NEPD113E - Updated Norgips Standard type A (STD) Phone: web Phone: Fa web Phone: Fa web post@epd-norge.no norgips@norgips.com mie@ostfoldforskning.no 7