How To Build A Ji Enclosure
|
|
- Milo Carter
- 3 years ago
- Views:
Transcription
1 JI Enclosures Type 12 Lift-Off over JI Enclosures Type 12 ontinuous Hinge over JI Enclosures Type 12 Screw over JI Enclosures Type 12 ontinuous Hinge Screw over JI Enclosures Type 12 ontinuous Hinge Quick-Release over JI Enclosures Type 12 Large ontinuous Hinge Screw over JI Enclosures Type 12 ontinuous Hinge Flanged Trough over Wall-Mount Enclosures Type 12 Single-Door Type Wall-Mount 1 Screw Enclosures over Type Wireway Terminal Type 1 Hinge over Wireway... 8 Wall-Mount Enclosures Type 12 Double-Door 3-Point Locking Type 3R Screw over Wireway...14 Ground-Mount Enclosures Type 12 Double-Door Floor-Standing 3-Point Locking NEM 12 Lay-In Wireway Ground-Mount Enclosures Type 12 Single-Door Free-Standing 3-Point Locking NEM 12 Feed-Through Wireway NEM Ground-Mount 12 Lift-Off Enclosures over Type Wiring 12 Double-Door Trough... Free-Standing 26 3-Point Locking Free-Standing Enclosure ccessories Ground-Mount Enclosures Type 12 Modular Free-Standing 3-Point Locking Ground-Mount Enclosures Type 12 Multi-Door Free-Standing 3-Point Locking Line series electrical enclosures 89
2 JI Enclosures Type 12 Lift-Off over Data Sheet pplication Houses electrical controls and instruments Protects against circulating dust, falling dirt and dripping non-corrosive liquids Standards UL 508 listed, Type 12 and Type 13 S 22.2 No.94 certified, Type 12 and Type 13 onforms to NEM standard for Type 12 and Type 13 Finish Wash and phosphate undercoat NSI 61 gray polyester powder finish Hardware and clamps are zinc plated ccessories Panels JI terminal strap kit JI terminal strip kit Terminal blocks Touch-up paint #8-32 self tapping screw (10168) See ccessories section onstruction Enclosure and cover are fabricated from (16) gauge steel ll continuous welded seams are finished smooth over is secured to the body with semi-hinge(s) on one side and easy-to-operate screw clamps mounted to the opposite side hain holds cover to body when screw clamps are released over has a seamless poured in-place gasket Ground stud provided on cover #10-32 weldnuts are provided for mounting optional panel on 6 x 4 and larger enclosures External mounting feet are provided for secure wall mounting Discount Schedule: 2 Subclass: DE0 Notes: We can provide special sizes, finishes and other modifications. onsult the factory for your special requirements. 90 -Line series electrical enclosures
3 JI Enclosures Type 12 Lift-Off over Illustration Sheet and atalog Number Enclosure Enclosure Size Panel Panel Size Height x Width x Depth atalog Number x x D Height x Width atalog Number in. mm in. mm Solid Perforarted in. mm D L 4.00 x 4.00 x x 102 x L 6.00 x 4.00 x x 102 x W64P W64PP 4.87 x x L 8.00 x 6.00 x x 152 x W86P W86PP 6.87 x x L 4.00 x 4.00 x x 102 x L 6.00 x 4.00 x x 102 x W64P W64PP 4.87 x x L 6.00 x 6.00 x x 152 x W66P W66PP 4.87 x x L 8.00 x 8.00 x x 203 x W88P W88PP 6.87 x x L x 8.00 x x 203 x W108P W108PP 8.87 x x L x x x 254 x W1210P W1210PP x x L x x x 305 x W1412P W1412PP x x L x x x 356 x W1614P W1614PP x x (25) D.31 (8) mounting hole (4PL) clamp L L L L L L L weldnut (4PL) (25) (51) (44) (44) chain +.75 (19) -.46 (12) mounting feet Side View optional panel over lamp Layout L L L L L L L L L Front View -Line series electrical enclosures 91
4 JI Enclosures Type 12 ontinuous Hinge over Data Sheet pplication Houses electrical controls and instruments Protects against circulating dust, falling dirt and dripping non-corrosive liquids Standards UL 508 listed, Type 12 and Type 13 S 22.2 No.94 certified, Type 12 and Type 13 onforms to NEM standard for Type 12 and Type 13 Finish Wash and phosphate undercoat NSI 61 gray polyester powder finish Hardware and clamps are zinc plated ccessories Panels JI terminal strap kit JI terminal strip kit Terminal blocks Touch-up paint #8-32 self tapping screw (10168) See ccessories section onstruction Enclosure and cover are fabricated from (16) gauge steel ll continuous welded seams are finished smooth over is secured to the body with a continuous hinge on one side and easy-to-operate screw clamps mounted to the opposite side over has a seamless poured in-place gasket Ground stud provided on cover #10-32 weldnuts are provided for mounting optional panel on 6 x 4 and larger enclosures External mounting feet are provided for secure wall mounting Discount Schedule: 2 Subclass: DE0 Notes: We can provide special sizes, finishes and other modifications. onsult the factory for your special requirements. 92 -Line series electrical enclosures
5 JI Enclosures Type 12 ontinuous Hinge over Illustration Sheet and atalog Number Enclosure Enclosure Size Panel Panel Size Height x Width x Depth atalog Number x x D Height x Width atalog Number in. mm in. mm Solid Perforated in. mm H 4.00 x 4.00 x x 102 x H 6.00 x 4.00 x x 102 x W64P W64PP 4.87 x x H 8.00 x 6.00 x x 152 x W86P W86PP 6.87 x x H 4.00 x 4.00 x x 102 x H 6.00 x 4.00 x x 102 x W64P W64PP 4.87 x x H 6.00 x 6.00 x x 152 x W66P W66PP 4.87 x x H 8.00 x 8.00 x x 203 x W88P W88PP 6.87 x x H x 8.00 x x 203 x W108P W108PP 8.87 x x HS x 8.00 x x 203 x W108P W108PP 8.87 x x H x 6.00 x x 152 x W126P W126PP x x H x x x 254 x W1210P W1210PP x x HS x x x 254 x W1210P W1210PP x x H 8.00 x 6.00 x x 152 x W86P W86PP 6.87 x x H 8.00 x 8.00 x x 203 x W88P W88PP 6.87 x x H x 8.00 x x 203 x W108P W108PP 8.87 x x H x x x 254 x W1010P W1010PP 8.87 x x H x x x 254 x W1210P W1210PP x x H x x x 305 x W1212P W1212PP x x H x 8.00 x x 203 x W148P W148PP x x H x x x 305 x W1412P W1412PP x x HS x x x 305 x W1412P W1412PP x x H x x x 254 x W1610P W1610PP x x H x x x 356 x W1614P W1614PP x x HS x x x 356 x W1614P W1614PP x x H x x x 254 x W1010P W1010PP 8.87 x x H x x x 254 x W1210P W1210PP x x H x x x 305 x W1412P W1412PP x x H x x x 356 x W1614P W1614PP x x H x x x 356 x W1614P W1614PP x x 327 Note: atalog numbers ending in -12 HS are hinged on the short side (51).31 (8) mounting hole (4PL) H H H H H H H H H +.75 (19) weldnut (4PL) (44) Front View (25) continuous hinge (25) (44) D D mounting feet -.46 (12) clamp Side View optional panel over lamp Layout H H H H H H H H H H H H H H H H -Line series electrical enclosures 93
6 JI Enclosures Type 12 Screw over Data Sheet pplication Houses electrical controls and instruments Protects against circulating dust, falling dirt and dripping non-corrosive liquids Standards UL 508 listed, Type 12 and Type 13 S 22.2 No.94 certified, Type 12 and Type 13 onforms to NEM standard for Type 12 and Type 13 Finish Wash and phosphate undercoat NSI 61 gray polyester powder finish ccessories Panels JI terminal strap kit JI terminal strip kit Terminal blocks Touch-up paint #8-32 self tapping screw (10168) See ccessories section onstruction Enclosure and cover are fabricated from (16) gauge steel ll continuous welded seams are finished smooth over is attached with captive screws which thread into sealed well nuts over has a fixed, oil-resistant gasket Ground stud provided on cover #10-32 weldnuts are provided for mounting optional panel on 6 x 4 and larger enclosures External mounting feet are provided for secure wall mounting Discount Schedule: 2 Subclass: DE0 Notes: We can provide special sizes, finishes and other modifications. onsult the factory for your special requirements. 94 -Line series electrical enclosures
7 JI Enclosures Type 12 Screw over Illustration Sheet and atalog Number Enclosure Enclosure Size Panel Panel Size Height x Width x Depth atalog Number x x Height x Width atalog Number in. mm Solid Perforated in. mm S 4.00 x 4.00 x x 102 x S 6.00 x 4.00 x x 102 x 76 W64P W64PP 4.87 x x S 8.00 x 6.00 x x 152 x 89 W86P W86PP 6.87 x x S 4.00 x 4.00 x x 102 x S 6.00 x 4.00 x x 102 x 102 W64P W64PP 4.87 x x S 6.00 x 6.00 x x 152 x 102 W66P W66PP 4.87 x x S 8.00 x 8.00 x x 203 x 102 W88P W88PP 6.87 x x S x 8.00 x x 203 x 102 W108P W108PP 8.87 x x S x x x 254 x 102 W1010P W1010PP 8.87 x x S x x x 254 x 127 W1210P W1210PP x x S 8.00 x 6.00 x x 152 x 152 W86P W86PP 6.87 x x S x 8.00 x x 203 x 152 W108P W108PP 8.87 x x S x x x 254 x 152 W1010P W1010PP 8.87 x x S x x x 305 x 152 W1212P W1212PP x x S x x x 305 x 152 W1412P W1412PP x x S x x x 356 x 152 W1614P W1614PP x x (51).31 (8) mounting hole (4PL) +.75 (19) (44) (25) (25) -.46 (12) optional panel weldnut (4PL) (44) mounting feet gasketed captive screw Side View Front View -Line series electrical enclosures 95
8 JI Enclosures Type 12 ontinuous Hinge Screw over Data Sheet pplication Houses electrical controls and instruments Protects against circulating dust, falling dirt and dripping non-corrosive liquids Standards UL 508 listed, Type 12 and Type 13 S 22.2 No.94 certified, Type 12 and Type 13 onforms to NEM standard for Type 12 and Type 13 Finish Wash and phosphate undercoat NSI 61 gray polyester powder finish ccessories Panels JI terminal strap kit JI terminal strip kit Terminal blocks Touch-up paint #8-32 self tapping screw (10168) See ccessories section onstruction Enclosure and cover are fabricated from (16) gauge steel ll continuous welded seams are finished smooth over is secured to the body with a continuous hinge on one side and captive screws which thread into sealed well nuts on the opposite side over has a fixed, oil-resistant gasket Ground stud provided on cover #10-32 weldnuts are provided for mounting optional panel External mounting feet are provided for secure wall mounting Discount Schedule: 2 Subclass: DE0 Notes: We can provide special sizes, finishes and other modifications. onsult the factory for your special requirements. 96 -Line series electrical enclosures
9 JI Enclosures Type 12 ontinuous Hinge Screw over Illustration Sheet and atalog Number Enclosure Enclosure Size Panel Panel Size Height x Width x Depth atalog Number atalog Number x x Height x Width in. mm Solid Perforated in. mm HS 6.00 x 6.00 x x 152 x 102 W66P W66PP 4.87 x x HS 8.00 x 6.00 x x 152 x 102 W86P W86PP 6.87 x x HS 8.00 x 8.00 x x 203 x 102 W88P W88PP 6.87 x x HS x 8.00 x x 203 x 102 W108P W108PP 8.87 x x HS x x x 254 x 102 W1010P W1010PP 8.87 x x HS x x x 254 x 102 W1210P W1210PP x x HS 8.00 x 6.00 x x 152 x 152 W86P W86PP 6.87 x x HS 8.00 x 8.00 x x 203 x 152 W88P W88PP 6.87 x x HS x 8.00 x x 203 x 152 W108P W108PP 8.87 x x HS x x x 254 x 152 W1010P W1010PP 8.87 x x HS x x x 254 x 152 W1210P W1210PP x x HS x x x 305 x 152 W1212P W1212PP x x HS x x x 305 x 152 W1412P W1412PP x x 272 continuous hinge (51).31 (8) mounting hole (4PL) +.75 (19) (44) (25) (25) 1.00 (25) 1.00 (25) -.46 (12) optional panel weldnut (4PL) -1.75) (44) mounting feet gasketed captive screw Side View Front View -Line series electrical enclosures 97
10 JI Enclosures Type 12 ontinuous Hinge Quick-Release over Data Sheet pplication Houses electrical controls and instruments Protects against circulating dust, falling dirt and dripping non-corrosive liquids Standards UL 508 listed, Type 12 and Type 13 onforms to NEM standard for Type 12 and Type 13 Finish Wash and phosphate undercoat NSI 61 gray polyester powder finish Latches are zinc plated ccessories Panels JI terminal strap kit JI terminal strip kit Terminal blocks Touch-up paint #8-32 self tapping screw (10168) See ccessories section onstruction Enclosure and cover are fabricated from (16) gauge steel ll continuous welded seams are finished smooth over is secured to the body with a continuous hinge on one side and quick-release latches mounted to the opposite side over has a seamless poured in-place gasket Ground stud provided on cover #10-32 weldnuts are provided for mounting optional panel External mounting feet are provided for secure wall mounting Discount Schedule: 2 Subclass: DE0 Notes: We can provide special sizes, finishes and other modifications. onsult the factory for your special requirements. 98 -Line series electrical enclosures
11 JI Enclosures Type 12 ontinuous Hinge Quick-Release over Illustration Sheet and atalog Number Type 12 / 13 Panel Enclosures Enclosure Enclosure Size Panel Panel Size Height x Width x Depth atalog Number x x D Height x Width atalog Number in. mm in. mm Solid Perforated in. mm HQR 6.00 x 4.00 x x 102 x W64P W64PP 4.87 x x HQR 8.00 x 6.00 x x 152 x W86P W86PP 6.87 x x HQR 6.00 x 6.00 x x 152 x W66P W66PP 4.87 x x HQR x 8.00 x x 203 x W108P W108PP 8.87 x x HQR x x x 254 x W1210P W1210PP x x HQR x x x 305 x W1412P W1412PP x x HQR x x x 356 x W1614P W1614PP x x (51).31 (8) mounting hole (4PL) continuous hinge D HQR HQR HQR +.75 (19) (44) (25) (25) D -.46 (12) optional panel HQR HQR HQR HQR weldnut (4PL) (44) mounting feet latch over lamp Layout Front View Side View -Line series electrical enclosures 99
12 JI Enclosures Type 12 Large ontinuous Hinge Screw over Data Sheet pplication Houses electrical controls and instruments Protects against circulating dust, falling dirt and dripping non-corrosive liquids Standards UL 508 listed, Type 12 and Type 13 S 22.2 No.94 certified, Type 12 and Type 13 onforms to NEM standard for Type 12 and Type 13 Finish Wash and phosphate undercoat NSI 61 gray polyester powder finish Panels have a white enamel finish ccessories NEM terminal strap kit Terminal blocks Touch-up paint See ccessories section onstruction Enclosure and door are fabricated from (14) gauge steel ll continuous welded seams are finished smooth Door is secured to the body with a continuous hinge on one side and captive hex head screws which thread into sealed well nuts on the opposite side Each door has a print pocket Door has a fixed, oil-resistant gasket Ground stud provided on door Heavy gauge panel mounted to collar studs is provided with enclosure External mounting feet are provided for secure wall mounting Discount Schedule: 2 Subclass: DH0 Notes: We can provide special sizes, finishes and other modifications. onsult the factory for your special requirements Line series electrical enclosures
13 JI Enclosures Type 12 Large ontinuous Hinge Screw over Illustration Sheet and atalog Number Type 12 / 13 Panel Enclosures Enclosure Enclosure Size Panel Size Height x Width x Depth x x Height x Width atalog Number in. mm in. mm HS x x x 406 x x x HS x x x 508 x x x HS x x x 508 x x x HS x x x 508 x x x HS x x x 610 x x x HS x x x 610 x x x HS x x x 508 x x x HS x x x 508 x x x HS x x x 610 x x x HS x x x 610 x x x (155).44 (11) mounting hole (2PL) X (44) (38) (44) 2.25 (57) 2.25 (57) L door fastener (omit center fastener where "" is less than 36) (25) panel print pocket (supplied) Front View X (121) mounting feet Side View collar stud and nut (omit center studs where "" is less than 36) (121) L panel x and smaller are flat x and larger are flanged Section X-X -Line series electrical enclosures 101
14 JI Enclosures Type 12 ontinuous Hinge Flanged Trough over Data Sheet pplication Houses electrical controls and instruments Protects against circulating dust, falling dirt and dripping non-corrosive liquids Standards UL 508 Listed, Type 12 and Type 13 S 22.2 No. 94 certified, Type 12 and Type 13 onforms to NEM standard for Type 12 and Type 13 Finish Wash and phosphate undercoat NSI 61 gray polyester powder finish Optional panels have a white enamel finish ccessories Panels JI terminal strap kit JI terminal strip kit JI terminal blocks Touch-up paint #8-32 self tapping screw (10168) onstruction Enclosure and door are fabricated from 16 gauge steel ody flange trough design, formed around body opening, diverts liquid contaminants away from door opening over has a seamless poured in-place gasket Integral compression stop to prevent over compression of gasket for optimal gasket performance Ground stud provided on door Door is secured to the body with a continuous hinge on one side and heavy-duty latches on the opposite side #10-32 weldnuts are provided for mounting optional panels External mounting feet are provided for secure wall mounting Discount Schedule: 2 Subclass: DE0 Notes: We can provide special sizes, finishes and other modifications. onsult the factory for your special requirements Line series electrical enclosures
15 JI Enclosures Type 12 ontinuous Hinge Flanged Trough over Illustration Sheet and atalog Number Type 12 / 13 Panel Enclosures Enclosure Enclosure Size Panel Panel Size Height x Width x Depth atalog Number x x D Height x Width atalog Number in. mm in. mm Solid Perforated in. mm 644-FT 6.00 x 4.00 x x 102 x W64P W64PP 4.87 x x FT 6.00 x 6.00 x x 152 x W66P W66PP 4.87 x x FT 8.00 x 6.00 x x 152 x W86P W86PP 6.87 x x FT x 8.00 x x 203 x W108P W108PP 8.87 x x FT x x x 254 x W1210P W1210PP x x FT x x x 305 x W1412P W1412PP x x FT x x x 356 x W1614P W1614PP x x (19) (51) continuous hinge D (11) (44) weldnut -.50 (13) clamp D Side View (44) (11) Front View 644 FT 664 FT 864 FT 1084 FT FT FT FT over lamp Layout -Line series electrical enclosures 103
16 Wall-Mount Enclosures Type 12 Single-Door Data Sheet pplication Houses electrical controls and instruments Protects against circulating dust, falling dirt and dripping non-corrosive liquids Standards UL 508 listed, Type 12 and Type 13 S 22.2 No.94 certified, Type 12 and Type 13 onforms to NEM standard for Type 12 and Type 13 Finish Wash and phosphate undercoat NSI 61 gray polyester powder finish ccessories Panels NEM terminal strap kit Terminal blocks Type 12 door handle kit Floor stand kit Touch-up paint See ccessories section onstruction Enclosure and door are fabricated from code gauge steel, (see tables, pages 106 & 107) ll continuous welded seams are finished smooth Doors are secured to the body with a heavy-duty continuous hinge on one side and easy-to-release door clamps mounted to the opposite side Each door has a padlock hasp with sealing hole provision Print pocket provided Door has a seamless poured in-place gasket Ground stud provided on door and body Formed lip around enclosure opening diverts liquids and contaminants collar studs are provided for mounting optional panel External mounting feet are provided for secure wall mounting Discount Schedule: 2 Subclass: DH0 Notes: We can provide special sizes, finishes and other modifications. onsult the factory for your special requirements Line series electrical enclosures
17 Wall-Mount Enclosures Type 12 Single-Door Illustration Sheet See pages 106 & 107 for dimensions (**).44 (11) mounting hole (2PL) X 3.50 (89) (70) padlock hasp (32) (70) 3.50 (89) L door clamp (omit center clamp where "" is less than 48) optional panel print pocket (supplied) L Front View X Side View (121) mounting feet (121) collar stud (omit center studs where "" is less than 36) L collar stud (omit center studs where "" is less than 36) L Note: Dimensions: ** = (-2.50) if 12 inches wide; (-6.00) if wider than 12 inches. Section X-X -Line series electrical enclosures 105
18 Wall-Mount Enclosures Type 12 Single-Door atalog Number Enclosure Enclosure Size Panel Panel Size Height x Width x Depth atalog Number atalog Number x x Height x Width in. mm Gauge Painted onductive in. mm x x x 610 x W2412P x x x x x 305 x W1612P W1612GP x x x x x 406 x W1616P W1616GP x x x x x 508 x W2016P W2016GP x x x x x 305 x W2012P x x x x x 406 x W2016P W2016GP x x x x x 508 x W2020P W2020GP x x x x x 610 x W2420P W242G0P x x x x x 305 x W2412P x x x x x 406 x W2416P W2416GP x x x x x 508 x W2420P W2420GP x x x x x 610 x W2424P W2424GP x x x x x 406 x W3016P W3016GP x x x x x 508 x W3020P W3020GP x x x x x 610 x W3024P W3024GP x x x x x 610 x W3624P W3624GP x x x x x 762 x W3630P W3630GP x x x x x 610 x W2412P x x x x x 305 x W1612P W1612GP x x x x x 406 x W1616P W1616GP x x x x x 508 x W2016P W2016GP x x x x x 305 x W2012P x x x x x 406 x W2016P W2016GP x x x x x 508 x W2020P W2020GP x x x x x 610 x W2420P W2420GP x x x x x 305 x W2412P x x x x x 406 x W2416P W2416GP x x x x x 508 x W2420P W2420GP x x x x x 610 x W2424P W2424GP x x x x x 762 x W3024P W3024GP x x x x x 508 x W3020P W3020GP x x x x x 610 x W3024P W3024GP x x x x x 762 x W3030P W3030GP x x x x x 914 x W3630P W3630GP x x x x x 610 x W3624P W3624GP x x x x x 762 x W3630P W3630GP x x x x x 914 x W3636P x x x x x 670 x W4224P x x x x x 762 x W4230P W4230GP x x x x x 914 x W4236P W4236GP x x x x x 610 x W4824P x x x x x 762 x W4830P W4830GP x x x x x 914 x W4836P W4836GP x x x x x 914 x W6036P W6036GP x x Line series electrical enclosures
19 Wall-Mount Enclosures Type 12 Single-Door atalog Number (cont d) Enclosure Enclosure Size Panel Panel Size Height x Width x Depth atalog Number atalog Number x x Height x Width in. mm Gauge Painted onductive in. mm x x x 305 x W1612P W1612GP x x x x x 406 x W2016P W2016GP x x x x x 508 x W2020P W2020GP x x x x x 305 x W2412P x x x x x 508 x W2420P W2420GP x x x x x 610 x W2424P W2424GP x x x x x 508 x W3020P W3020GP x x x x x 610 x W3024P W3024GP x x x x x 610 x W3624P W3624GP x x x x x 762 x W3630P W3630GP x x x x x 762 x W4230P W4230GP x x x x x 914 x W4236P W4236GP x x x x x 762 x W4830P W4830GP x x x x x 914 x W4836P W4836GP x x x x x 914 x W6036P W6036GP x x x x x 406 x W2016P W2016GP x x x x x 508 x W2420P W2420GP x x x x x 610 x W2424P W2424GP x x x x x 610 x W3024P W3024GP x x x 30.00v x 762v W3030P W3030GP x x x x x 610v W3624P W3624GP x x x x x 762 x W3630P W3630GP x x x x x 914 x W3636P x x x x x 762 x W4230P W4230GP x x x x x 914 x W4236P W4236GP x x x x v914 x W4836P W4836GP x x x x x 914 x W6036P W6036GP x x x x x 914 x W7236P x x x x x 508 x W2420P W2420GP x x x x x 610 x W2424P W2424GP x x x x x 610 x W3024P W3024GP x x x x x 762 x W3630P W3630GP x x x x x 914 x W4236P W4236GP x x x x x 914 x W4836P W4836GP x x x x x 914 x W6036P W6036GP x x x x x 762 x W7230P x x x x x 610 x W3024P W3024GP x x x x x 762 x W3630P W3630GP x x x x x 914 x W4836P W4836GP x x x x x 914 x W6036P W6036GP x x x x x 762 x W7230P x x x x x 610 x W3024P W3024GP x x x x x 762 x W7230P x x 682 -Line series electrical enclosures 107
20 Wall-Mount Enclosures Type 12 Terminal Data Sheet pplication Houses and protects wiring terminals Protects against circulating dust, falling dirt and dripping non-corrosive liquids Standards UL 508 listed, Type 12 and Type 13 S 22.2 No.94 certified, Type 12 and Type 13 onforms to NEM standard for Type 12 and Type 13 Finish Wash and phosphate undercoat NSI 61 gray polyester powder finish Terminal strap assembly has an electrogalvanized finish ccessories Panels Extra strap kit Terminal blocks Type 12 door handle kit Floor stand kit Touch-up paint See ccessories section onstruction Enclosure and door are fabricated from code gauge steel, (see table, page 109) ll continuous welded seams are finished smooth Doors are secured to the body with a heavy-duty continuous hinge on one side and easy-to-release door clamps mounted to the opposite side Each door has a padlock hasp with sealing hole provision Print pocket provided Door has a seamless poured in-place gasket Ground stud provided on door and body Formed lip around enclosure opening diverts liquids and contaminants Removable terminal strap assembly is installed on collar studs and used for mounting optional terminal blocks, (order terminal blocks separately) External mounting feet are provided for secure wall mounting Discount Schedule: 2 Subclass: DH0 Notes: We can provide special sizes, finishes and other modifications. onsult the factory for your special requirements Line series electrical enclosures
21 Wall-Mount Enclosures Type 12 Terminal Illustration Sheet and atalog Number Enclosure Enclosure Size Quantity Height x Width x Depth of straps x x D atalog Number in. mm Gauge in. mm TE x x x 305 x TE x x x 406 x TE x x x 508 x TE x x x 508 x TE x x x 610 x TE x x x 508 x TE x x x 610 x TE x x x 610 x TE x x x 762 x TE x x x 762 x TE x x x 914 x TE x x x 914 x (**).44 (11) mounting hole (2PL) 3.50 (89) adjustable terminal strap (1.50 wide) padlock hasp (32) L D door clamp (omit center clamp where "" is less than 48) 3.50 (89) mounting feet Front View (door removed) 3.12 (79) Side Section View Note: Dimensions: ** = (-2.50) if 12 inches wide; (-6.00) if wider than 12 inches. -Line series electrical enclosures 109
22 Wall-Mount Enclosures Type 12 Double-Door with 3-Point Locking Data Sheet and atalog Number Finish Wash and phosphate undercoat NSI 61 gray polyester powder finish ccessories Panels NEM terminal strap kit Terminal blocks Floor stand kit Touch-up paint Replacement handle, (see page 428). See ccessories section pplication Houses electrical controls and instruments Protects against circulating dust, falling dirt and dripping non-corrosive liquids Standards UL 508 listed, Type 12 and Type 13 S 22.2 No.94 certified, Type 12 and Type 13 onforms to NEM standard for Type 12 and Type 13 onstruction Enclosure and door are fabricated from (14) gauge steel ll continuous welded seams are finished smooth Doors are secured to the body with a heavy-duty continuous hinge and a center locating 3-point padlock handle mechanism which closes the right side door over the left Print pocket provided Doors have a gasket Ground stud provided on door and body No center post for complete front access collar studs are provided for mounting optional panel External mounting feet are provided for secure wall mounting Discount Schedule: 2 Subclass: DK0 Enclosure Enclosure Size Panel Panel Size Height x Width x Depth x x Height x Width atalog Number in. atalog Number in. mm D x x x 1067 x 203 W4224P x x D x x x 1219 x 203 W4824P x x D x x x 1067 x 254 W4230P x x D x x x 1219 x 254 W4830P x x D x x x 1524 x 254 W6030P x x D x x x 1067 x 305 W4236P x x D x x x 1219 x 305 W4836P x x D x x x 1524 x 305 W6036P x x D x x x 1067 x 305 W4242P x x D x x x 1219 x 305 W4842P x x D x x x 1524 x 305 W6042P x x D x x x 1219 x 305 W4848P x x 1140 Notes: We can provide special sizes, finishes and other modifications. onsult the factory for your special requirements Line series electrical enclosures
23 Wall-Mount Enclosures Type 12 Double-Door with 3-Point Locking Illustration Sheet (152).44 (11) mounting hole (3PL) X (32) (70) (70) Front View Y L rotation Y 3-point lever handle lock print pocket (supplied) X Side View optional back panel (121) mounting feet body stiffener (omit where "" is less than 30) (121) L collar stud (omit center studs where "" is less than 36) L Section X-X Section Y-Y adjustable 3-point roller assembly -Line series electrical enclosures 111
24 Ground-Mount Enclosures Type 12 Double-Door Floor-Standing with 3-Point Locking Data Sheet and atalog Number Finish Wash and phosphate undercoat NSI 61 gray polyester powder finish pplication Houses electrical controls and instruments Protects against circulating dust, falling dirt and dripping non-corrosive liquids Standards UL 508 listed, Type 12 S 22.2 No.94 certified, Type 12 onforms to NEM standard for Type 12 ccessories Panels Leg stabilizer kit Touch-up paint Replacement handle, T4PKH, (see page 428) See ccessories section onstruction Enclosure and door are fabricated from code gauge steel, (see table below) ll continuous welded seams are finished smooth Doors are secured to the body with a heavy-duty continuous hinge and a center locating 3-point key-locking and padlock handle mechanism which closes the right side door over the left Print pocket provided Doors have a gasket Ground stud provided on doors and body No center post for complete front access Heavy gauge panel supports and collar studs are provided for mounting optional panel Large lifting eyebolts are supplied Mounting legs are provided for floor mounting Discount Schedule: 2 Subclass: DK0 Enclosure Enclosure Size Panel Panel Size Height x Width x Depth atalog Number x x Height x Width in. mm Gauge atalog Number in. mm FD x x x 1067 x W5442P x x FD x x x 1219 x W6048P x x FD x x x 1219 x W6048P x x FD x x x 1524 x W6060P x x FD x x x 1524 x W7260P x x FD x x x 1829 x W7272P x x FD x x x 1219 x W6048P x x FD x x x 1524 x W6060P x x FD x x x 1524 x W7260P x x FD x x x 1829 x W7272P x x FD x x x 1219 x W6048P x x FD x x x 1524 x W6060P x x FD x x x 1524 x W7260P x x FD x x x 1829 x W7272P x x FD x x x 1219 x W6048P x x FD x x x 1524 x W7260P x x FD x x x 1829 x W7272P x x FD x x x 1219 x W6048P x x FD x x x 1524 x W6060P x x FD x x x 1524 x W7260P x x FD x x x 1829 x W7272P x x 1724 Notes: We can provide special sizes, finishes and other modifications. onsult the factory for your special requirements Line series electrical enclosures
25 Ground-Mount Enclosures Type 12 Double-Door Floor-Standing with 3-Point Locking Illustration Sheet Type 12 / 13 Panel Enclosures lifting eye X panel support (70) (70) rotation print pocket (supplied) X 3-point keylocking and padlock handle mounting leg Front View (305) Note: Four Lifting eyes are furnished when dimension is (508 mm) or more. Side View +.25 (6) adjustable 3-point roller assembly (35) 2.87 (73) (70) collar stud Section X-X (enlarged) -Line series electrical enclosures 113
26 Ground-Mount Enclosures Type 12 Single-Door Free-Standing with 3-Point Locking Data Sheet Single-Door Single-ccess See page 115 pplication Houses electrical controls and instruments Easy access panels or rack mounts for housing optional equipment Dual-access construction available for back-to-back panel and equipment mounting Protects against circulating dust, falling dirt and dripping non-corrosive liquids Standards UL 508 listed, Type 12 S 22.2 No.94 certified, Type 12 onforms to NEM standard for Type 12 E.I.. RS-310-D Finish Wash and phosphate undercoat NSI 61 gray polyester powder finish ccessories Full and half panels Side panels Swing panels enter post Rack mount angles and swing out frames (see pages ) hannel mounting hardware Touch-up paint Replacement handle, T4PKH, (see page 428) See ccessories section Single-Door Dual-ccess See page 116 onstruction Enclosure and door are fabricated from (12) gauge steel ll continuous welded seams are finished smooth Doors are secured to the body with a heavy-duty continuous hinge and a 3-point key-locking and padlock handle mechanism Doors have a seamless poured in-place gasket Ground stud provided on door(s) and body Print pocket provided Large lifting eyebolts are supplied Mounting channels are welded inside for locating panels along enclosure depth Dual-access enclosures permit back-to-back panel mounting variety of optional panels and accessories are available, (see accessories pages ) Two styles of enclosure construction: 1. Single-door, single-access 2. Single-door, dual-access Discount Schedule: 2 Subclass: DM0 Notes: We can provide special sizes, finishes and other modifications. onsult the factory for your special requirements Line series electrical enclosures
27 Ground-Mount Enclosures Type 12 Single-Door Free-Standing with 3-Point Locking Illustration Sheet and atalog Number Type 12 / 13 Panel Enclosures Enclosure Enclosure Size atalog Number Height x Width x Depth NSI 61 Gray x x D E arbon Steel in. mm in. mm in. mm FS x x x 610 x FS x x x 610 x FS x x x 762 x FS x x x 914 x FS x x x 610 x FS x x x 914 x FS x x x 914 x FS x x x 610 x FS x x x 762 x FS x x x 914 x FS x x x 914 x FS x x x 610 x FS x x x 914 x FS x x x 914 x FS x x x 914 x lifting eye (41) mounting channel (70) rotation 3-point keylocking and padlock handle D (273) D E 8.87 (225) print pocket (supplied) 7.37 (187) Front View Side View -Line series electrical enclosures 115
28 Ground-Mount Enclosures Type 12 Single-Door Dual-ccess Free-Standing with 3-Point Locking Illustration Sheet and atalog Number Enclosure Enclosure Size atalog Number Height x Width x Depth NSI 61 Gray x x D E arbon Steel in. mm in. mm in. mm FSD x x x 610 x FSD x x x 762 x FSD x x x 914 x FSD x x x 914 x FSD x x x 610 x FSD x x x 610 x FSD x x x 914 x FSD x x x 914 x (41) lifting eye (70) rotation mounting channel 3-point keylocking and padlock handle D (273) D E 8.87 (225) print pocket (supplied) 7.37 (187) Front View Side View Notes: Four lifting eyes are furnished when dimensions is (762 mm) or more. Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice Line series electrical enclosures
29 Ground-Mount Enclosures Type 12 Double-Door Free-Standing with 3-Point Locking Data Sheet Type 12 / 13 Panel Enclosures pplication Houses electrical controls and instruments Easy access panels or rack-mounts for housing optional equipment Dual-access construction available for back-to-back panel and equipment mounting Protects against circulating dust, falling dirt and dripping non-corrosive liquids Standards UL 508 listed, Type 12 S 22.2 No.94 certified, Type 12 onforms to NEM standard for Type 12 E.I.. RS-310-D Finish Wash and phosphate undercoat NSI 61 gray polyester powder finish Double-Door Single-ccess See page 118 ccessories Full and half panels Side panels Swing panels enter post Rack mount angles and swing out frames (see pages ) hannel mounting hardware Touch-up paint Replacement handle, T4PKH, (see page 428) See ccessories section Double-Door Dual-ccess See page 119 onstruction Enclosure and door are fabricated from (12) gauge steel ll continuous welded seams are finished smooth Doors are secured to the body with a heavy-duty continuous hinge and a 3-point key-locking and padlock handle mechanism Double-door units close right over left Doors have an oil-resistant gasket Ground stud provided on doors and body Print pocket provided Large lifting eyebolts are supplied Mounting channels are welded inside for locating panels along enclosure depth Dual-access enclosures permit back-to-back panel mounting Swing panels, single full and single half panels can be installed in double-door enclosures when the center post is used variety of optional panels and accessories are available, (see accessories pages ) Two styles of enclosure construction: 1. Double-door, single-access 2. Double-door, dual-access Discount Schedule: 2 Subclass: DM0 Notes: We can provide special sizes, finishes and other modifications. onsult the factory for your special requirements. -Line series electrical enclosures 117
30 Ground-Mount Enclosures Type 12 Double-Door Single-ccess Free-Standing with 3-Point Locking Illustration Sheet and atalog Number Enclosure Enclosure Size atalog Number Height x Width x Depth NSI 61 Gray x x D E arbon Steel in. mm in. mm in. mm FSD x x x 1219 x FSD x 48.00x x x 1219 x FSD x x x 1524 x FSD x x x 1829 x FSD x x x 1219 x FSD x x x 1829 x FSD x x x 1219 x FSD x x x 1524 x FSD x x x 1829 x FSD x x x 1829 x FSD x x x 1524 x FSD x x x 1829 x lifting eye (41) (273) (41) (70) rotation mounting channel body stiffener (see note) 3-point key-locking and padlock handle D D E 8.87 (225) 7.37 (187) L Front View print pocket (supplied) Side View Notes: Two body stiffeners spaced evenly along enclosure height. Four lifting eyes are furnished when dimension is (914 mm). Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice Line series electrical enclosures
Type 1, 3, & 3R Enclosures
Junction oxes Type 1 Screw over....................................................................... 50-53 Junction oxes Type 1 Hinge over........................................................................
More informationCable & Wire Management
able & ire Management able & ire Management Lay-In ireway Type 1 Screw over... 8-14 Lay-In ireway Type 1 Quick-onnect inge over... 15-20 Lay-In ireway Type 3R EnviroShield... 21-24 Lay-In ireway Type 12...
More informationSection H Index. www.hubbell-wiegmann.com Data Subject To Change Without Notice OPERATOR INTERFACE
Section H Index H1 W1 Series NEMA 12 onsoles...h2 W9 Series NEMA 12 onsoles...h4 W10 Series NEMA 12 onsoles...h6 W12 Series NEMA 12 onsoles...h8 W14 Series NEMA 12 onsoles...h10 W- Series NEMA 12 onsolets...h12
More informationJIC CONTINUOUS HINGE BOXES
JIC CONTINUOUS HINGE BOXES Austin JIC Continuous Hinge (JH) boxes are Underwriters Laboratories Listed and are designed for use as electrical junction boxes, terminal wiring boxes, and instruments housing.
More informationPROLINE Go l d Se r i e s. Desk Consoles and Accessories
Modular Enclosure Systems Application PROLINE Gold Series desk consoles are ergonomically designed for use in either a sitting or standing position. Single-access consoles have a front door and solid back.
More informationLocks, Latches, Inserts, & Handles Flush Locks Illustration Sheet and Catalog Number. Type 1 Enclosure Flush Lock. New Flush lock
Locks, Latches, Inserts, & Handles Flush Locks Illustration Sheet and Type 1 Panel Enclosure Flush Lock Type 1 Enclosure Flush Lock T1EFL New Flush lock.886 dia. (22) Hole Pattern Detail Flush Locks are
More informationTABLE OF CONTENTS. Section 1 Type 1 & 3R Enclosures pg. 2-19. Section 2 Type 4 & 12 Enclosures pg. 20-47
TLE OF CONTENTS Section 1 Type 1 & 3R pg. 2-19 Type 1 & 3R Section 2 Type 4 & 12 pg. 20-47 Section 3 Flange Mounted Disconnect pg. 48-89 Section 4 Type 4, 12 & 13 Oiltight pg. 90-111 Section 5 Pushbutton
More informationRittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS
Rittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS STANDARD & ECONOMICAL BasicRack A complete low-cost, high-quality basic equipment management system. Design Six web channel holes per side allow
More informationPremier & Deluxe 3-Season Room Sliding Glass Door
DTSSGD-11 Premier & Deluxe 3-Season Room Sliding Glass Door Installation Instructions Screen Door Seal Left Side Track Top Track Assembly Right Side Track Right Side Trim Sliding Glass Door Sliding Screen
More informationwww.hammondmfg.com General Accessories Hardware
Heavy Duty Door Clamping Junction Box Padlock Kit Quick Release Clamp Replacement hardware for use on all 1418 and 1447 Series enclosures. Formed heavy gauge stainless steel clamp with stainless steel
More informationRack installation instructions
Rack installation instructions Review the documentation that comes with the rack cabinet for safety and cabling information. Before you install the server in a rack cabinet, review the following guidelines:
More informationCatalog Number L (in.) L (mm) ACLJIC 1.25 32. Catalog Number ACLSN12 1.69 43 APLKJIC APLKJIC6SS
Spec-00479 G763.422.2211 763.422.2600 Locks, Lockouts, Latches, Handles and Clamps Locks Locks, Lockouts, Latches, Handles and Clamps Locks Lock Kit for Clamp Cover Junction Boxes L (in.) L (mm) ACLJIC
More informationCABINET OPTIONS AND DESIGNATORS
CABINET OPTIONS AND DESIGNATORS Hinges: ~Stainless steel lift off Nuts and Bolts: ~ Stainless steel Hardware: ~ Handles and Corbin locks are stainless steel or zinc plated Windows: ~ Lexan Backboards:
More informationFRAME PROFILE MASONRY METAL DOOR FRAME FLUSH MASONRY KD MITER CORNER JOINT. #8 Screw (MS002485) Required on all fire rated KD frames. Bend Tabs.
FRAME PROFILE MASONRY FLUSH MASONRY KD MITER CORNER JOINT Bend Tabs Head #8 Screw (MS002485) Required on all fire rated KD frames Corner Assembly 2" (50.8) Head Jamb Head Break Away Corner Clip Spot Welds
More informationSOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
More informationSTB Series Enclosures
STB Series Enclosures Features/Applications: The STB series of sheet steel enclosures are designed to meet the requirement for distribution and lighting junction boxes. Available in 14 sizes with standard
More informationIT infrastructure Efficiency-boosting solutions. nextlevel. for data centre
IT infrastructure Efficiency-boosting solutions nextlevel for data centre 2 Rittal IT infrastructure The whole is more than the sum of its parts. The same is true of Rittal The System. With this in mind,
More informationSERVER ROOM CABINET INSTALLATION CONCEPTS
SERVER ROOM CABINET INSTALLATION CONCEPTS SERVER ROOM CABINET INSTALLATION CONCEPTS SERVER ROOM CABINET INSTALLATION CONCEPTS ZPAS 169 EXAMPLES OF SERVER ROOMS PROJECTS WITH ZPAS CABINETS Data Box in the
More informationSSG PRODUCTS FOR SHIPS AND OFFSHORE
6.1 SSG PRODUCTS FOR SHIPS AND OFFSHORE SSG workshop cabinets, tables and shelving system specially adapted to be used on-board ships and offshore. Developed in close cooperation with users from these
More informationAMPSEAL* Automotive Plug Connector and Header Assembly
AMPSEAL* Automotive Plug Connector and Header Assembly Application Specification 24 SEP 97 Rev E All dimensions are given in millimeters unless otherwise specified. All dimensional tolerances are +0.2
More informationLinkeo 19" freestanding cabinets
87045 LIMOGES Cedex France Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Linkeo 19" freestanding cabinets Page 1. General characteristics....1 2. Range....2 3. Technical characteristics...3
More informationDCF Optimized Rack System
Integrated Cabinet Solutions For Business-Critical Continuity DCF Optimized Rack System User Manual IMPORTANT SAFETY GUIDELINES SAVE THESE INSTRUCTIONS This manual contains important instructions that
More informationINSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks
Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 techsupport@securitron.com in door opening solutions INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate
More informationCabinets 101: Configuring A Network Or Server Cabinet
Cabinets 101: Configuring A Network Or Server Cabinet North, South and Central America White Paper May 2012 www.commscope.com Contents Background Information 3 What is a network or server cabinet? 3 What
More informationF-Series Camera Mounting Accessories
F-Series Camera Mounting Accessories Document Number: 427-0462-00-12 Version: 100 Issue Date: September 2010 2010. All rights reserved worldwide. FLIR Commercial Systems, Inc. 70 Castilian Drive Goleta,
More informationData Centre Solutions
Issue 6 Data Centre Solutions RACKS POWER COOLING MONITORING SECURITY SERVICE & SUPPORT The simple route to the perfect data centre Data centres are complex systems. Software, hardware and IT infrastructure
More informationA D D E N D U M # 3 QUESTIONS FROM BIDDERS: DATE: November 5, 2012. All Bidders. Jenne dos Santos, CBI Consulting Inc. City of Chelsea, MA
Page 1 of 10, Addendum No. 3 Temporary Garage Structure City of Chelsea, MA November 5, 2012 CBI Job No.: 12055-A A D D E N D U M # 3 DATE: November 5, 2012 TO: FROM: PROJECT: All Bidders Jenne dos Santos,
More informationIntegral Kit Instructions
Integral Kit Instructions For Fisher & Paykel Cabinet widths of 525, 635, 680, 790 mm wide For curved door Models Series B, C, D & G Manual 814980 Updated August 2008 IMPORTANT If your refrigerator has
More informationINC Flexi-Sorb. Versatile Flexible Easy To Install Durable Good Noise Reduction Economical. Typical Applications
INC Flexi-Sorb Noise Control Curtain System Versatile Flexible Easy To Install Durable Good Noise Reduction Economical Our Flexi-Sorb noise control curtain product line consists of flexible, durable acoustical
More informationSecure your IT equipment with confidence... secure with NetClosure
Secure your IT equipment with confidence... secure with NetClosure SERVER CABINETS NetClosure s REM Series Server Cabinet is the ultimate solution designed and engineered for demanding data center environments.
More informationCustomized Server Cabinets
GOING GREEN WITH CUSTOMIZABLE CABINETS AND RACKS Designed to provide industry leading airflow, CyrusOne s cabinets and rack solutions promote optimal cooling and contribute to reduced power consumption.
More informationUnpacking, Installation, and Customization
Unpacking, Installation, and Customization NetShelter WX Enclosure AR100 AR100HD Contents Unpacking... 1 How to Unpack the Enclosure............................... 1 Please Recycle..........................................
More informationAll-Season Sunroom Sliding Glass Door Installation Instructions
ASRESGD-08 All-Season Sunroom Sliding Glass Door Installation Instructions Panel Frame Door Frame Left Side Foam Insulator IE241 H Bar Assembly Door Frame Top Track Panel Frame Door Frame Right Side Stationary
More informationCABINET & ENCLOSURE WWW.LINKBASIC.COM STANDARD FEATURES MATERIALS APPLICATION N C B C A B I N E T P/N:NCB
STANDARD Comply with ANSI/EIARS-30-D, DIN9; PART, IEC97-, DIN9; PART7, GB/T307.-9 standard. Compatible with metric ETSI and 9 inch international standard. FEATURES Exquisite design with precise craftsmanship
More informationHow To Fit A Steel Frame For A Steel Plate Uprights
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 01 33 02 34 03 35 04 36 05 37 06 38 07 39 08 40 09 41 10 42 11 43 12 13 14 15 16 17 18 19 20 21 22 23 24
More informationImportant: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks
TITAN pt. no.: 03 0000 0120 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended
More informationStainless Steel and Mild Steel Enclosures. Stainless Steel and Mild Steel Enclosures
SX 8 The SX range comprises 14 sizes of enclosure manufactured in either stainless steel or mild steel. 11 sizes are available in depths of 140 or 200mm and 8 sizes are available in depths of 140, 200
More informationARTS AND CRAFTS 10.1.0. 5410 (open) 5412 (doors) H : 84" Tote Tray Storage. Damp Storage. Tote Tray Storage. Notebook Board Storage, Doors
Drawing Board Storage, Open Drawing Board Storage, Doors Drawing Board Storage Notebook Storage, Open 1670 D : 23.25" holds 32 drawing boards 1 shelf, adjustable on 1¼" increments maximum board height
More information19" GERMANY EXPORT RACK QUALITY PRODUCT FOR THE BEST WORK NEW DESIGN CABLE MANAGEMENT PANEL WALL RACK CABINET 15 U VENTILATING FAN
NEW DESIGN CABLE MANAGEMENT PANEL WALL RACK CABINET 15 U VENTILATING FAN AC SOCKET STRIP (AC Power Distribution) BLANK PANELS x U OPEN RACK THERMOSTAD PANEL SET CABLE MANAGEMENT PANEL WITH COVER BAYING
More informationF-SERIES TERAFRAME HD CABINET SYSTEM
P R O D U C T D ATA S H E E T F-SERIES TERAFRAME HD CABINET SYSTEM K E Y F E AT U R E S Safely transports up to 3,000 lb (1360 kg) of electronic equipment from a factory integration site direct to a customer
More informationRack Cabinets. Rack Configuration. 19 inch
Rack Cabinets Rack Configuration 19 inch 19 RACK COMPONENTS FEATURES Hallam Manufacturing s range of 19 inch racks and cabinets for today s data/communications installations are designed and manufactured
More informationBase Cabinet with Self-storing Folding Doors and Floor
Usable Kitchens When designing a kitchen for use by persons with mobility impairments, especially those who use wheelchairs, careful layout of the kitchen is crucial to maintaining accessibility. People
More informationInstallation Instructions For Slider Casement Air Conditioners
Installation Instructions For Slider Casement Air Conditioners NOTE: These instructions describe installation in a typical wood framed window with a wood SLIDE-BY sash, or installation in a metal CASEMENT
More informationKnürr Smaract. Knürr Smaract. CompactRack
CompactRack Features Ample space for components and cabling provided in an efficient, compact design. The innovative frame concept with triangular extrusions ensures low weight while maintaining high stability.
More information19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
More informationK17.12 Door closers K17. Doors 01.09.2013
K17 Doors K17.12 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com Contents 1. OPTIC door closer TS40(V) with scissor
More information19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=600mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
More informationCluster Box Units. (CBU s) 3300 Series CBU Door Sizes. Fully Integrated Parcel Lockers CLUSTER BOX UNITS FRONT LOADING. continued on pages 7-11
Cluster Box Units (CBU s) continued on pages 7-11 CLUSTER BOX UNITS FRONT LOADING Made of heavy duty aluminum and stainless steel hardware, Salsbury 3300 series U.S.P.S. approved Cluster Box Units (CBU
More informationTITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V
TITAN pt. no.: 02 0000 0143 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended
More informationJames M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
More informationPRO PANELS. 1-800-525-4159 www.propanels.com. the artist s choice in display designed by artists, for artists. voice: 214-350-5765 fax: 214-350-7372
PRO PANELS by MD Enterprises the artist s choice in display designed by artists, for artists 1-800-525-4159 www.propanels.com voice: 214-350-5765 fax: 214-350-7372 MD Enterprises 1-800-525-4159 voice:
More informationECLIPSE THE ULTIMATE MULTI-PURPOSE SHELVING SYSTEM. UP TO 360kg SHELF CAPACITY QUICK & EASY BOLT-FREE ASSEMBLY STRONG, ROBUST & MODERN DESIGN DESIGN
ECLIPSE CHROME WIRE SHELVING ECLIPSE THE ULTIMATE MULTI-PURPOSE SHELVING SYSTEM UP TO 360kg SHELF CAPACITY QUICK & EASY BOLT-FREE ASSEMBLY STRONG, ROBUST & MODERN DESIGN A S S E M B LY Fully Adjustable
More informationSports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049
Sports and High Mast Lighting Poles 4 High Mast Lighting Poles General American LitePole offers a raising and lowering system that allows for ease of maintaining the lighting system at ground level. Ideal
More informationInstallation Instructions
READ BEFORE INSTALLING UNIT For Slider Casement Air Conditioners To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges that may be exposed:
More informationPowerware Enclosure Solutions Product Focus
Powerware Enclosure Solutions Product Focus Powerware Enclosures IT availability and reliability are critical corporate issues in today s demanding, mission-critical environments. For this reason, it is
More informationProduct Catalogue (updated Feb. 2010)
Product Catalogue (updated Feb. 2010) 315 BROCK RD GREENSVILLE ON L9H 5H7 PHONE: 905-628-0766 FAX: 905-628-8277 www.efcomltd.com info@efcomltd.com 1 Table of Contents Tool Boxes... 3 Cylinder Enclosures
More information19" Open Rack for Network and Cabling Management
19" Open Rack for Network and Cabling Management Feartures: The CLM-221X-XXXX openrack is a solution of easier assemblying, more competitive price for our customers. All components can be seperated by
More informationSECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
SECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes seismic restraints and other earthquake-damage-reduction measures for electrical
More informationTERMINATION ENCLOSURE OPTIONS
TERMINATION ENCLOSURE OPTIONS Add suffix: R - Reverse Stagger the Bus Bars (to run cable in from the top) CU - Copper NEMA Mount Bus Bars C - Plastisol Covers for Bus Bars DF - Dead Fronts T - Tin Plated
More informationReduced depth High Density Cabinet HDC with 19 swing frame 36, 40 and 45 U
Reduced depth High Density Cabinet HDC with 19 swing frame 36, 40 and 45 U Applications The High Density Cabinets are suitable for Central Offices and can be used as fiber nodes and termination points
More informationONTRAC WIRE MESH CABLE TRAY SYSTEM
P R O D U C T D ATA S H E E T ONTRAC WIRE MESH CABLE TRAY SYSTEM K E Y F E AT U R E S Available in two styles: Shaped and Standard Tray Easy to use pathway solution that supports large quantities of network
More information3M Mobile SkyWalk Series Horizontal Lifeline Product Return Form
3M Mobile SkyWalk Series Horizontal Lifeline Product Return Form THIS FULLY COMPLETED DOCUMENT MUST BE INCLUDED WITH EACH RETURN SHIPMENT IN ORDER FOR CREDIT TO BE ISSUED. ALL CREDITS WILL BE ISSUED TO
More informationRittal Data Center Enclosures Modular and wallmount enclosures, racks and accessories
Rittal Data Center Enclosures Modular and wallmount enclosures, racks and accessories Rittal TS8 Modular and Wallmount Enclosures and Racks Your Data Center Partner Rittal TS8 Modular Enclosures Rittal
More informationANTENNA PARTS CATALOG
ANTENNA PARTS CATALOG Maco Antennas 302 S. East St. Mt. Carroll, IL 61053 www.macoantennas.net 815-244-3500 www.antennapartsoutlet.com SCREWS / BOLTS PART SIZE LENGTH DESCRIPTION PRICE S21 10-24 1/2" Machine
More informationK. D. FRAME ASSEMBLY FOR CLOSED STEEL STUD WALLS...Ins 10. FRAME INSTALLATION DETAILS FOR CLOSED STEEL STUD WALLS...Ins 11
K. D. FRAME ASSEMBLY FOR MASONRY WALLS...........................Ins 2 FRAME INSTALLATION DETAILS FOR MASONRY WALLS......................Ins 3 INSTALLING EXISTING MASONRY WALL ANCHORS IN FRAME..................Ins
More informationBLADE S-MAX Cabinet for Blade Server
Cabinet for Blade Server 1 2 Overview Material specification Corner verticals: 1.5 mm steel End frames: 1.5 mm steel Panel mounts: 2.0 mm steel Panel mount supports: 1.5 mm steel Side panels, door and
More informationMCC Ratings. Voltage Rating
MCC Ratings In addition to the various ratings of individual components used in motor control centers, the overall ratings of the motor control center must also be considered. Voltage Rating Motor control
More informationAM/FM ANTENNA KIT (TOUR-PAK MOUNT)
-J077 REV. 008-0-0 AM/FM ANTENNA KIT (TOUR-PAK MOUNT) GENERAL Kit Number 7-98A Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com
More informationPART 1 GENERAL 1.1 SECTION INCLUDES
J-1 Section 09110 Long Form Specification INTERIOR METAL STUD FRAMING This section includes lightweight, usually 0.036 inch (0.9 mm) thick or lighter, non-axial load bearing metal stud framing including
More informationSTANDARD SPECIFICATIONS SECTION 05500 METAL FABRICATIONS
STANDARD SPECIFICATIONS SECTION 05500 METAL FABRICATIONS PART 1 GENERAL 1.1 DESCRIPTION A. Section includes requirements for providing metal fabricated items like castings, gratings, hatchways, ladders,
More informationSeries 18 Pass Thru Air Lock Cleanroom Entry System
OPERATION & MAINTENANCE INSTRUCTIONS FOR Series 18 Pass Thru Air Lock Cleanroom Entry System SOLUTIONS BUILT TO YOUR SPECIFICATIONS 8605 Wyoming Ave. N. Minneapolis MN 55445 fax: 763.425.2004 e-mail: sales@cleanairproducts.com
More informationInstallation information. METTLER TOLEDO MultiRange Floor scales / Pit scales
Installation information METTLER TOLEDO MultiRange Floor scales / Pit scales KC300/KCS300 KC600/KCS600 KD600/KD1500 KE1500/KE3000 KES1500/KES3000 KG3000/KG6000 KN1500 Floor scales / Pit scales Contents
More informationPS6500 Storage Arrays Rack Mount Instructions
PS6500 Storage Arrays Rack Mount Instructions Part Number: R724M Rev. A01 Copyright 2010 Dell, Inc. All rights reserved. Dell is a trademark of Dell, Inc. EqualLogic is a registered trademark. All trademarks
More informationPSS10H/B PSS12H/A ILLUSTRATED PARTS LISTS
PSS10H/B PSS12H/A ILLUSTRATED PARTS LISTS AC AND DC GENERATOR SCHEMATIC ENGINE GENERATOR ASSEMBLY REF Description QTY PSS10 PSS12 1 Engine, Honda GX620K1VXC2 Code 637220 1 99779-000 GX670VXC2 Code 637220
More informationCDGRD-10. Grounding. Solutions For Comm/Data Applications
CDGRD-10 Grounding Solutions For Comm/Data Applications Overview & Table of Contents Cooper B-Line s Grounding products for rack & runway provide a complete solution for grounding metal supports. The offering
More informationDIGITUS Network & Server Cabinets. UNIQUE Series
DIGITUS Network & Server Cabinets UNIQUE Series Benefits - Server Rack 4-Point locking system front door 3-point locking system rear door Swing handle lock with profile zylinder in front and rear door
More informationUniversal systems for frameless doors
EN Universal systems for frameless doors Xinnix Door Systems designs, creates and manufactures systems for internal doors. With our construction elements, it is possible to obtain easily an elegant and
More informationTable of Contents. RimatriX5 IT Solutions from Rittal. Product Overview Section 1... Pages 3-11. Enclosures Section 2...
Rittal IT Solutions Table of Contents RimatriX5 IT Solutions from Rittal Product Overview Section 1... Pages 3-11 Enclosures Section 2... Pages 12-51 Cooling Section 3... Pages 52-73 Monitoring and Security
More informationSECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 08332 COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Counter Fire Doors. 1.2
More informationSECTION 6. Glass Storefront Doors:
SECTION 6 Glass Storefront Doors: Table of Contents 3070 Storefront Door System Description & Dimensions 6070 Storefront Door System Description & Dimensions Door Leaf Detail Optional 10 Bottom Rail Detail
More informationWindow Installation Instructions
Caution The correct installation methods of windows in full frame or insert applications is critical towards achieving the tested performance of the window and longterm enjoyment and energy savings for
More informationOVERALL CONVEYOR WIDTH STEEL ALUMINUM MODEL # PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT.
Pick Smarter. Pick Better. Pick UNEX. Skatewheel (SW) Skatewheel Gravity Conveyor is ideally suited to convey lightweight packages and where operations require portable or temporary conveyor lines such
More informationSpeed-Mat Rectangle Cutter
Speed-Mat Rectangle Cutter 1 Honeycomb baseboard. 2 Left hold down. 14 3 Bottom hold down. 4 4 Left / right rule. 8 5 8 5 Left / right rule pointer. 1 6 Top / bottom rule. 7 Top / bottom rule pointer.
More informationData Center Rack Systems Key to Business-Critical Continuity. A White Paper from the Experts in Business-Critical Continuity TM
Data Center Rack Systems Key to Business-Critical Continuity A White Paper from the Experts in Business-Critical Continuity TM Executive Summary At one time, data center rack enclosures and related equipment
More informationPUBLIC RESTROOMS, DESIGN INTENT
PUBLIC RESTROOMS, DESIGN INTENT 1.01 STRUCTURAL A. Where feasible, metal stud partitions will be constructed on a 6 high concrete curb. 1.02 MECHANICAL A. Restrooms will have a minimum of 15 air changes
More informationStainless-steel enclosures
Stainless-steel enclosures Spacial S3X Stainless-steel wall-mounting enclosures 5/8 Dimensions 5/11 Selection guide 5/12 Spacial S3EX for potentially explosive atmospheres 5/16 Spacial SMX Stainless-steel
More informationControl and Distribution Boxes made of Stainless Steel Series 8150
www.stahl.de > Circumferential protection channel prevents water entry > Extended temperature range due to high-quality seal s > Optionally with hinges / cam locks or screw-on cover > Hinge versions with
More informationDELTA3-1. Delta 3 Data Centre Rack Solution
DELTA3-1 Delta 3 Data Centre Rack Solution Contents Building on more than 50 years of British design and innovation, Cooper B-Line introduces Delta 3 ( Delta cubed ). Designed to offer M.O.R.E. to customers
More informationMGB Chrome Bumper Conversion
MGB Chrome Bumper Conversion Installation Instructions For 1974 1/2-1980 MGB This kit requires cutting, welding, and painting. Professional installation recommended. Note: Every MGB body is slightly different
More information19" Data Racks. Adjustable feet To compensate for uneven floors and assure great stability all feet can be up to 20 mm adjusted.
19" Data Racks Attractive design and high quality are characteristic. Basic framework is welded from multiple bent metal plate, which assures great rigidity suitable for heavier equipment. All profile
More informationSTORAGE DESIGN LIMITED
Cupboards Cubio have a huge capacity and are available in two types. Standard duty storage are designed to allow organised storage of parts and tools in a range of plastic bins on adjustable shelves. Heavy
More informationCable Runways & Accessories
SB17U SB13AL SB17 SB17T SB117 SB17HRB SB2107 SB2101A SB17VRB SB2110A SB2129 SB2129SD SB130 SB2221 SB126 SB2118 SB119 SB2105 113 Cooper B-Line manufactures a wide variety of high quality cable pathway products
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationTS8 PLATFORM OF IT CABINETS
Designed With The Utmost In Aesthetics And Functionality... TS8 PLATFORM OF IT CABINETS TS8 Server Cabinets ATTRACTIVE & HIGHLY FUNCTIONAL Server A modernly designed cabinet that features the utmost in
More informationSAMPLE INSTRUCTIONS. Best Barns USA Assembly Book. the Denver. 12'x 12' or 12'x16' Revised November 29, 2010
Best Barns USA Assembly Book Revised November 29, 2010 SAMPLE INSTRUCTIONS the Denver 12'x 12' or 12'x16' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775
More information2. The Laboratory Fume Hood Specification Catalog Select the style and size hoods appropriate for your layout and laboratory use.
TABLE OF CONTENTS How to Specify... 3 Introduction to Fisher Hamilton Stainless Steel Laboratory Casework... 4 5 Stainless Steel Casework Options Menu... 6 Base Cabinets... 7 17 Sitting Height Cabinets...
More informationBERTHOLD ELECTRIC GENERATOR CONNECTION CABINET
BERTHOLD ELECTRIC GENERATOR CONNECTION CABINET Berthold Electric Company s Generator Connection Cabinet provides a quick and convenient station to connect a portable generator to a facility s main service
More informationKnürr DCM. Knürr DCM. 19 Server Rack System 19 Heavy Duty Rack 1.2 to 1.9 1.1
Knürr DCM 19 Server Rack System 19 Heavy Duty Rack 1.2 to 1.9 1.1 Knürr DCM conquers the world Standardization in the data center begins with the Knürr DCM! The Knürr DCM is the modular building block
More informationInformation Technology Solutions
Information Technology Solutions Aluminum Sliding Door Assembly Instructions Shield Doors & Windows Bi-fold Door Assembly Instructions For Support Please Call 03 8339 2252 Aluminum Sliding Door Assembly
More information42U/45U 28" Wide Rack Installation & Service Guide
42U/45U 28" Wide Rack Installation & Service Guide 96-00171-005 Rev B Important Information Information in this document is subject to change without notice and does not represent a commitment on the part
More information