Fiber Optic Product Catalog

Transcription

1 20 is a unique fiber optic enclosure that is supplied with connectors on the front of the cassette and can be supplied with an MPO/MTP adapter or preterminated with connectors or a pigtail for splicing on the rear end. Lengths as long as 1 km can be supplied in OFNR, OFNP, interlocking armor plenum, indoor/outdoor, OSP non-armored, OSP armored, flat drop, or alternative jacket cable. Most popular connectors can be supplied with up to 24 fibers. is compact and minimizes the use of crucial rack or wall space. This unique product can eliminate splicing at the building entrance and customer premise. It instead requires just one splice in a manhole or an OSP splice case. Instead of installing conduit, pulling fiber through it, and then splicing pigtails, can be supplied as a system with cable, conduit, and connectors all pre-installed at the factory. can be supplied on a reel Features ARIA is mountable in a variety of hardware and is offered with many pre-terminated cable options ARIA can be installed in any rackmount or wallmount enclosure that supports LGX or CCH type cassettes LGX Dimensions: 4.0 x 5.1 x 1.1 (H xw xd ) CCH Dimensions: 3.8 x 6.1 x 1.4 (H xw xd ) is compact and minimizes the use of crucial rack or wall space is pre-terminated and eliminates the risk of damaging the internal fiber optic connections This durable plug and play product offers rodent protection and supports the use of a shroud to protect jumpers. with Non-Armored Alternative Jacket Cable and Pulling Eye Shown

2 21 Applications: MDU Drops to Customer Premises SPLWM Series Wallmount Enclosure In this instance, the Pre-terminated is located at the customer premises and the spooled indoor/outdoor cable is routed outside to the manhole and spliced. This method eliminates the costly splicing of fibers at both the building entrance and at the customer premises which results in savings of thousands of dollars in labor and materials as well as faster customer hook-up. In this instance, the Pre-terminated is located at the customer premises and the spooled OFNR or OFNP cable is routed to the basement or building entry point and is spliced in an indoor rated splice-only enclosure (ARIA SPLWM shown above). Another splice is performed at the manhole in an OSP Splice Case. Applications: Drops to ITS Cabinets Underground Splice Enclosure Drop Cable Drop Cable When Cabinets or Cell Tower Shelter racks are loaded to capacity and leave no room for rack mount enclosures, just mount the ARIA on the wall and route the cable to manholes or where splice cases are located for transition to backbone cables.

3 22 Mounting Options Wall mount brackets can be utilized to mount directly onto a wall Open top Wallmount/Rackmount brackets can be utilized to mount multiple modules on a wall Open top Wallmount/Rackmount brackets can be utilized to mount multiple modules in a rack Open top Wallmount/Rackmount brackets can be utilized to mount multiple modules in a cell tower cabinet The shroud accessory protects the patchcords from damage when the is mounted on a wall The shroud with door accessory protects the patchcords and allows quick access to them after installation Wall mount brackets can be utilized to mount the 2X directly onto a wall The LGX and 2X Wallmount/ Rackmount Bracket can be utilized to mount an LGX and a 2X on a wall or in a rack

4 23 2X The ARIA 2X supports up to 24 fibers SC or 48 fibers LC. It is twice as wide as the standard LGX and it has two locations for pre-terminated cable assemblies to exit on the back of the cassette. The enclosure size of the ARIA 2X is 4.00 x x 1.13 (H xw xd ). Need MPO/MTP Connectivity? ARIA s MPO/MTP Cassette Module is similar to but provides an MPO/MTP adapter on the rear of the cassette instead of the pre-terminated stub. LC Duplex Connector This feature allows the module to interconnect MPO/ MTP backbones and patch cords. This product is available in the following configurations: 12 Fiber SC to 12 Fiber MPO/MTP 12 Fiber LC to 12 Fiber MPO/MTP 24 Fiber LC to Dual 12 Fiber MPO/MTP MPO/MTP Connector Accessories LGX and 2X Wallmount/ Rackmount Bracket - P/N: 2X1 LGX W-R BRACKET-OT and 2X Wallmount Bracket P/N: (Ordered with Part Number) Extension Bracket for 1RU Wallmount/Rackmount Bracket (P/N: REB-1RU-ALUM) Extension Bracket for 2RU Wallmount/Rackmount Bracket (P/N: REB-2RU-STL0

5 24 Accessories (Continued) 3 Module 1RU LGX Wallmount/Rackmount Bracket P/N: 3XLGXW-RBRACKET-B-OT 2 Module 1RU CCH Wallmount/Rackmount Bracket P/N: 2XCCHW-RBRACKET-B-OT 6 Module 2RU LGX Wallmount/Rackmount Bracket P/N: 6XLGXW-RBRACKET-B-OT 4 Module 2RU CCH Wallmount/Rackmount Bracket P/N: 4XCCHW-RBRACKET-B-OT 2X LGX Wallmount Bracket P/N: 2XLGXWMBRACKET-B-OT 2X CCH Wallmount Bracket P/N: 2XCCHWMBRACKET-B-OT LGX Shroud with Door P/N: AFP-LGX-SHROUD-WD LGX Shroud P/N: AFP-LGX-SHROUD CCH Shroud P/N: AFP-CCH-SHROUD CCH Shroud with Door P/N: AFP-CCH-SHROUD-WD

6 25 Part Number 1 -AFP Cassette Type 4 Rear Connectivity 6 Cable Length 2 3 LGX = LGX CCH = CCH 2XF = 2X Adapter Plate Type 06 = 6 Port (SC/FC/ST) 08 = 8 Port (SC/FC/ST) 12 = 12 Port (SC/LC) 24 = 24 Port (: LC or 2X : SC) 48 = 48 Port (2X : LC) Adapter Type DR = Distribution Style Riser Rated Cable DP = Distribution Style Plenum Rated Cable AP = Interlocking Armor Plenum Rated Cable* IR = Indoor/Outdoor Riser Rated Cable IP = Indoor/Outdoor Plenum Rated Cable OA = Outside Plant Armored Cable ON = Outside Plant Non-Armored Cable AJ = Non-Armored Alternative Jacket Cable 7 Leave Blank for No Stub XXXF = XXX feet XXXM = XXX meters Wallmount Bracket WMB = Wallmount Bracket Leave Blank for No Wallmount Bracket Singlemode SCU = SC/UPC SCA = SC/APC LCU = LC/UPC LCA = LC/APC FCU = FC/UPC FCA = FC/APC STU = ST/UPC Multimode SCM = SC LCM = LC FCM = FC STM = ST 5 *Only available in CCH Fiber Type Singlemode S = SMF-28e+ B = SMF Bend Insensitive G.657.A1 Multimode 1 = 62.5/125μm 2 = 50/125μm 3 = 50/125μm OM3 4 = 50/125μm OM4