2-series Network Camera

Transcription

1 2-series Network Camera Quick Operation Guide V1.0.0 UD.6L0201C1157A02

2 Quick Operation Guide of Network Camera 1 Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. This manual applies to Type 20xx Series 21xx Series 22xx Series 23xx Series 26xx Series 27xx Series Model DS-2CD2012-I, DS-2CD2032-I DS-2CD2112-I, DS-2CD2132-I DS-2CD2212-I5, DS-2CD2232-I5, DS-2CD2212-I3, DS-2CD2232-I3 DS-2CD2312-I, DS-2CD2332-I DS-2CD2612F-I, DS-2CD2632F-I DS-2CD2712F-I(S); DS-2CD2732F-I(S) This manual may contain several technical incorrect places or printing errors, and the content is subject to change without notice. The updates will be added to the new version of this manual. We will readily improve or update the products or procedures described in the manual. DISCLAIMER STATEMENT Underwriters Laboratories Inc. ( UL ) has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested for fire, shock or casualty hazards as outlined in UL s Standard(s) for Safety, UL UL Certification does not cover the performance or reliability of the security or signaling aspects of this product. UL MAKES NO REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT. Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

3 Quick Operation Guide of Network Camera 2 Table of Contents Chapter 1 Appearance Description Appearance Description of Bullet Camera xx Series Bullet Camera xx Series Bullet Camera xx Series Bullet Camera Appearance Description of Dome Camera xx Series Dome Camera xx Series Dome Camera Appearance Description of Turret Camera... 8 Chapter 2 Setting the Network Camera over the LAN... 9 Chapter 3 Accessing via Web Browsers... 11

4 Quick Operation Guide of Network Camera 3 Chapter 1 Appearance Description 1.1 Appearance Description of Bullet Camera xx Series Bullet Camera Camera Overview: Figure 1-1 Bullet Camera Overview Table 1-1 Description No. Description 1 Sun Shield 2 Back Box 3 Grounding Screw 4 Adjustable Bracket 5 Mounting Base 6 Reset

5 Quick Operation Guide of Network Camera xx Series Bullet Camera Camera Overview: Figure 1-2 Bullet Camera Overview Table 1-2 Description No. Description 1 Lens 2 IR LED 3 Sun Shield 4 Adjusting Screw 5 Network Cable 6 Power Cable

6 Quick Operation Guide of Network Camera xx Series Bullet Camera Camera Overview: Figure 1-3 Overview Table 1-3 Overview No. Description 1 Sun Shield 2 Front Cover 3 Zoom and Focus Lever 4 IR LED 5 Lens 6 Air Vent 7 Video Output Interface 8 Integrated Bracket 9 Reset Button 10 SD Card Slot 11 Power Cable 12 Network Cable

7 Quick Operation Guide of Network Camera Appearance Description of Dome Camera xx Series Dome Camera Camera Overview: Figure 1-4 Overview Table 1-4 Description No. Description 1 Mounting Base 2 Horizontal Stand 3 Vertical Stand 4 Bubble 5 Cables 6 IR LED 7 Lens 8 Black Liner 9 Safety Rope

8 Quick Operation Guide of Network Camera xx Series Dome Camera Camera Description Figure 1-5 Overview Table 1-5 Description No. Description 1 Bubble 2 Black Liner 3 Reset Button 4 AUX Video Output Interface 5 Serial Port 6 Power Cable 7 Ethernet Cable 8 Adapter Plate 9 Lens

9 Quick Operation Guide of Network Camera Appearance Description of Turret Camera Camera Overview: Figure 1-6 Overview Table 1-6 Description NO. Description 1 10M/100M self-adaptive Ethernet interface 2 Power Cable 3 Trim Ring 4 Lens 5 IR LED 6 Enclosure 7 Camera

10 Quick Operation Guide of Network Camera 9 Chapter 2 Setting the Network Camera over the LAN Purpose: To view and configure the camera via LAN (Local Area Network), you need to connect the network camera in the same subnet with your PC. Then install the ivms-4200 software to search and change the IP address of the network camera. The following figure shows the cable connection of a network camera and a PC: Figure 2-1 Wiring over LAN Set the IP address of the camera for accessing via LAN. Steps: 1. Use ivms-4200 client software to detect the online devices. Please refer to the user manual of ivms-4200 client software for detailed information. Search online devices automatically After launch ivms-4200 software, it automatically searches the online devices every 15 seconds from the subnet where your computer locates. It displays the total number and information of the searched devices in the Online Devices interface. Go to Device Management, and click Server tab on the left-top of the window, and you can see the online devices listed on the right bottom of the window. Figure 2-2 Search Online Devices

11 Quick Operation Guide of Network Camera 10 Device can be searched and displayed in the list in 15 seconds after it went online; it will be removed from the list in 45 seconds after it went offline. Search online devices manually You can also click searched devices will be added to the online list. to refresh the online device list manually. The newly 2. Change the IP address and subnet mask to the same subnet as of your PC. Steps: 1) Click the device to be modified in the device list and click to modify the network parameters. 2) Edit the modifiable network parameters, e.g. IP address and port number. 3) Enter the admin password in the Manager Password field and click to save the changes. Figure 2-3 Modify Network Parameters The default value of the IP address is The default user name is admin, and password is For accessing the network camera from different subnets, please set the gateway for the network camera after you log in.

12 Quick Operation Guide of Network Camera 11 Chapter 3 Accessing via Web Browsers System Requirement: Operating System: Microsoft Windows XP SP1 and above version / Vista / Win7 / Server 2003 / Server bits CPU: Intel Pentium IV 3.0 GHz or higher RAM: 1G or higher Display: resolution or higher Web Browser: Internet Explorer 6.0 and above version, Apple Safari 5.02 and above version, Mozilla Firefox 3.5 and above version and Google Chrome8 and above version Steps: 1. Open the web browser. 2. In the browser address bar, input the IP address of the network camera, e.g., and hit the enter key to enter the login interface. 3. Input the user name and password. 4. Click. Figure 3-1 Login Interface 5. Install the plug-in before viewing the live video and managing the camera. Please follow the installation prompts to install the plug-in. You may have to close the web browser to finish the installation of the plug-in.

13 Quick Operation Guide of Network Camera 12 Figure 3-2 Download Plug-in Figure 3-3 Download New Version Plug-in Figure 3-4 Install Plug-in

14 Quick Operation Guide of Network Camera 13 Figure 3-5 Complete the Plug-in Installation 6. Reopen the web browser after the installation of the plug-in and repeat the above steps 2-4 to login. For detailed instructions of further configuration, please refer to the user manual of network camera.

15