Cisco Industrial Ethernet 3000 Layer 2/Layer 3 Series Switches

Transcription

1 Cisco Industrial Ethernet 3000 Layer 2/Layer 3 Series Switches Product Overview The Cisco Industrial Ethernet 3000 Series (IE 3000 Series) is a family of Layer 2 and Layer 3 switches that bring Cisco s leadership in switching to Industrial Ethernet applications with Innovative features, robust security, and superior ease of use. The Cisco IE 3000 Series features: Industrial design and compliance Tools for easy deployment, management, and replacement Network security based on open standards Integration of IT and industrial automation networks The Cisco IE 3000 Series is an ideal product for Industrial Ethernet applications, including factory automation, energy and process control, and intelligent transportation systems (ITSs). The Cisco IE 3000 offers: Design for Industrial Ethernet applications, including extended environmental, shock/vibration, and surge ratings; a complete set of power input options; convection cooling; and DIN-rail or 19 rack mounting Support for hundreds of hardware configurations Easy setup and management using the Cisco Device Manager web interface and supporting tools, including Cisco Network Assistant and CiscoWorks Easy switch replacement using removable memory, allowing the user to replace a switch without having to reconfigure High availability, guaranteed determinism, and reliable security using Cisco IOS Software Recommended software configurations for industrial applications that can be applied at the touch of a button Compliance to a wide range of Industrial Ethernet specifications covering industrial automation, ITS, substation, railway, and other markets Support for IEEE1588v2, a precision timing protocol with nanosecond-level precision for high-performance applications Improved ring resiliency with the support of Resilient Ethernet Protocol (REP) Transparent IT integration with the support of Layer 3 routing protocols (IP Services) PROFINET v2 certification, with PROFINET conformance class B compliance ABB Industrial IT certification Configurations The Cisco IE 3000 Series includes the following products (refer to Table 1): Cisco IE TC: Industrial Ethernet switch with four Ethernet 10/100 ports and two dual-purpose uplink ports (a dual-purpose port has one 10/100/1000BaseTX port and one Small Form-Factor Pluggable [SFP] port, port active), Layer 2 Lan Base image included Cisco IE TC: Industrial Ethernet switch with eight Ethernet 10/100 ports and two dual-purpose uplink ports, Layer 2 Lan Base image included 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 9

2 Cisco IE TC-E: Industrial Ethernet switch with four Ethernet 10/100 ports and two dual-purpose uplink ports (a dual-purpose port has one 10/100/1000BaseTX port and one SFP port, port active), Layer 3 IP Services image included Cisco IE TC-E: Industrial Ethernet switch with eight Ethernet 10/100 ports and two dual-purpose uplink ports, IP Services image included Cisco IEM TM=: Expansion module for Cisco IE TC, Cisco IE TC, Cisco IE TC- E, and Cisco IE TC-E with eight Ethernet 10/100 ports Cisco IEM FM=: Expansion module for Cisco IE TC, Cisco IE TC, Cisco IE TC- E, and Cisco IE TC-E with eight 100BaseFX ports Cisco PWR-IE3000-AC=: Expansion module supporting AC and extended DC power inputs Solution Specifications The Cisco IE 3000 Series software, based on Cisco IOS Software, is a rich suite of intelligent services, supporting high availability, quality of service (QoS), and security features. The SFP-based uplink ports accommodate a range of industrial-grade SFP transceivers, including 1000BASE-SX, 1000BASE-LX, 1000BASE-ZX, 100BASE-FX, and 100BASE-LX10. Table 1. Description Cisco IE 3000 Switches Specification Cisco IE TC-E 4 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has one 10/100/1000 Ethernet port and one SFP-based Gigabit Ethernet port, one port active) Each switch supports two (2) Cisco IEM TM= modules, one (1) Cisco IEM FM= module, or one (1) Cisco IEM TM= module and one (1) Cisco IEM FM= module IP Services image Cisco IE TC-E 8 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has one 10/100/1000 Ethernet port and one SFP-based Gigabit Ethernet port, one port active) Each switch supports two (2) Cisco IEM TM= modules, one (1) Cisco IEM FM= module, or one (1) Cisco IEM TM= module and one (1) Cisco IEM FM= module IP Services image Cisco IEM TM= Expansion Module for Cisco IE TC-E and Cisco IE TC Switches, 8 10/100 TX ports 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 9

3 Description Cisco IEM FM= Specification Expansion Module for Cisco IE TC-E and Cisco IE TC Switches, FX ports Cisco PWR-IE3000-AC= Expansion Power Module for Cisco IE TC-E and Cisco IE TC Switches, supports 110/220VAC and VDC (base switches support 18VDC-60VDC) Industrial Ethernet Applications The new Cisco IE 3000 Series is an ideal product for a variety of Industrial Ethernet applications: Industrial automation: The Cisco IE 3000 is designed to support a wide array of Industrial Ethernet protocols for automation. The Cisco IE 3000 features a programmable logic controller (PLC) form-factor design with extended environmental ratings, convection cooling, DIN-rail mounting, redundant 24VDC power input, alarm relays, and surge/noise immunity. The Cisco IE 3000 software and configuration tools allow for easy setup, optimized for Industrial Ethernet applications (for example, Ethernet/IP). Multicast control, traffic prioritization, and security features are specified in default templates recommended for these protocols. ITS: The Cisco IE 3000 supports ITS and other applications for outdoor video and traffic or transportation systems control. The switch supports compliance to NEMA TS-2, a variety of gigabit fiber uplinks, and AC and DC power input options, while Cisco IOS Software supports critical ITS features, including virtual LAN (VLAN), QoS, Internet Group Management Protocol (IGMP) snooping, and security access control lists (ACLs). Substations: The Cisco IE 3000 is fully compliant to substation automation specifications, including IEC61850 and IEEE1613. The switch supports high-speed ring recovery; fiber access and uplink ports; and AC, 48VDC, and a variety of power input options for the substation environments with the PWR-IE3000-AC=. Other applications: The Cisco IE 3000 can be deployed in railway, military, Metro Ethernet, and other applications requiring unique environmental, form factor, or power inputs in harsh environments. Table 2 gives the features and benefits of the Cisco IE 3000 Series. Table 3 gives the hardware specifications, and Table 4 gives the power specifications. Table 5 lists the management and standards support, and Table 6 provides the safety and compliance information Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 3 of 9

4 Table 2. Category Features and Benefits of Cisco IE 3000 Series Feature/Benefit Designed for industrial applications Ease of deployment, management, and replacement Availability and scalability Security Extended temperature, vibration, shock and surge, and noise immunity ratings comply to specifications for automation, ITS, and substation environments. Compact, PLC-style form factor is ideal for deployment in industrial environments. DIN-rail, wall, and 19 rack mount options allow for deployments in a variety of control systems. Variety of power input options covers a wide range of power requirements for Industrial Ethernet applications. Up to 300 deployment configurations, supporting a range of access port densities, copper and fiber uplinks, fiber access ports, and power input, deliver flexibility in deployment. Support for SFP modules provides uplink connectivity supporting 100BASE-LX, 100BASE-FX, 1000BASE-SX, 1000BASE-LX, and 1000BASE-ZX options. Alarm relay contacts can be used for an external alert system. Cisco Express Setup simplifies initial configuration with a web browser, eliminating the need for more complex terminal emulation programs. Cisco Smartports templates provide the option to apply a default global or interface-level macro with a recommended configuration, allowing the user to easily set up the switch in a configuration optimized for the specific application. Smartports templates for Ethernet/IP provide an optimized setup for these Industrial Ethernet protocols at the touch of a button. Swappable Flash memory is ideal for quick and easy switch replacement. Memory can be moved from one switch to another, so a switch can be replaced without the need to reconfigure software features. The Common Industrial Protocol (CIP) management objects are supported, including a custom profile for primary Ethernet switch features. The Cisco IE 3000 can be managed by CIP-based management tools, allowing the user to manage an entire industrial automation system with one tool. The Cisco IE 3000 can be managed by PROFINET based management tools. The IE 3000 has PROFINET v2 certification, with PROFINET conformance class B compliance. Simple Network Management Protocol (SNMP) (v1/v2/v3) support allows for management using traditional IT-based management tools, including CiscoWorks. Device Manager allows web-based switch configurations. DHCP port-based allocation retains the IP address on a per port basis and simplifies the end-host replacement in an industrial setting. HTTPS access Cisco Network Assistant is a no-charge, Windows-based application that simplifies the administration of networks of up to 250 users. It supports the Cisco IE 3000 and a wide range of Cisco Catalyst intelligent switches. With Cisco Network Assistant, users can manage Cisco Catalyst switches and launch the device managers of Cisco integrated services routers and Cisco Aironet WLAN access points. Configuration wizards need just a few user inputs to automatically configure the switch to optimally handle different types of traffic: control, voice, video, multicast, and high-priority data. Virtual LANs (VLANs) allow for logical segmentation for a network for optimal use of bandwidth. QoS classifies and prioritizes data, guaranteeing determinism for mission-critical data. IGMPv3 snooping provides fast client joins and leaves of multicast streams and limits bandwidth-intensive traffic to only the requestors. An additional querier allows this operation in a Layer 2 only environment. IGMP filtering provides multicast authentication by filtering out no subscribers and limits the number of concurrent multicast streams available per port. Per-port broadcast, multicast, and unicast storm control prevents faulty end stations from degrading overall systems performance. IEEE 802.1d Spanning Tree Protocol support for redundant backbone connections and loop-free networks simplifies network configuration and improves fault tolerance. EtherChannel LACP support for quick recovery and bandwidth utilization FlexLinks for fast recovery Cisco Hot Standby Router Protocol (HSRP) is supported to create redundant, failsafe routing topologies. Resilient Ethernet Protocol, scalable up to 130 nodes with a very fast convergence, 50ms. IEEE 802.1x with VLAN assignment, guest VLAN, and voice VLAN allows dynamic port-based security, providing user authentication. Port-based ACLs for Layer 2 interfaces allow application of security policies on individual switch ports. MAC address filtering prevents the forwarding of any type of packet with a matching MAC address. Secure Shell (SSH) Protocol v2 and SNMPv3 provide network security by encrypting administrator traffic during Telnet and SNMP sessions. SSHv2 and the cryptographic version of SNMPv3 require a special cryptographic software image because of U.S. export restrictions. TACACS+ and RADIUS authentication enable centralized control of the switch and restrict unauthorized users from altering the configuration. MAC address notification allows administrators to be notified of users added to or removed from the network. Dynamic Host Configuration Protocol (DHCP) snooping allows administrators to help ensure consistent mapping of IP to MAC addresses. This can be used to prevent attacks that attempt to poison the DHCP binding database and to rate limit the amount of DHCP traffic that enters a switch port. DHCP Interface Tracker (Option 82) augments a host IP address request with the switch port ID. Port security secures the access to an access or trunk port based on MAC address Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 4 of 9

5 Category High-performance IP routing Feature/Benefit After a specific time frame, the aging feature removes the MAC address from the switch to allow another device to connect to the same port. Trusted Boundary provides the ability to trust the QoS priority settings if an IP phone is present and to disable the trust setting if the IP phone is removed, thereby preventing a malicious user from overriding prioritization policies in the network. Up to 512 ACLs are supported, with two profiles: Security (384 Security ACL entries and 128 QoS policies) and QoS (128 Security ACL entries and 384 QoS polices). Cisco standard and extended IP security router ACLs define security policies on routed interfaces for control-plane and data-plane traffic. Dynamic ARP Inspection helps ensure user integrity by preventing malicious users from exploiting the insecure nature of the ARP protocol. DHCP Snooping prevents malicious users from spoofing a DHCP server and sending out bogus addresses. This feature is used by other primary security features to prevent a number of other attacks such as ARP poisoning. IP source guard prevents a malicious user from spoofing or taking over another user's IP address by creating a binding table between client's IP and MAC address, port, and VLAN. Support for private VLANs Inter-VLAN IP routing for full Layer 3 routing between 2 or more VLANs. Basic IP unicast routing protocols (static, Routing Information Protocol Version 1 [RIPv1], RIPv2 and RIPng). Advanced IP unicast routing protocols (Open Shortest Path First [OSPF], Interior Gateway Routing Protocol [IGRP], Enhanced IGRP [EIGRP], Border Gateway Protocol Version 4 [BGPv4, IS-ISv4]) are supported for load balancing and constructing scalable LANs. Protocol Independent Multicast (PIM) for IP multicast routing is supported, including PIM sparse mode (PIM-SM), PIM dense mode (PIM-DM), and PIM sparse-dense mode. Cisco Express Forwarding hardware routing architecture delivers extremely high-performance IP routing. IPv6 routing (OSPFv6 and EIGRPv6) support in hardware for maximum performance. Policy-based routing (PBR) allows superior control by facilitating flow redirection regardless of the routing protocol configured. HSRP provides dynamic load balancing and failover for routed links; up to 32 HSRP links supported per unit. Support for 1000 multicast groups. VRF-Lite virtualization Table 3. Description Performance Cisco IE 3000 Series Switch Hardware Specification Wire-speed switching, 16 Gbps switching fabric Forwarding rate based on 64-byte packets: 6.5 Mpps 128 MB DRAM 64 MB Compact Flash memory Configurable up to 8000 MAC addresses (Layer 2 switch) Configurable up to 2000 MAC addresses (Layer 3 switch) Configurable up to 256 IGMP multicast groups (Layer 2 switch) Configurable up to 1000 IGMP groups and multicast routes (Layer 3 switch) Configurable up to 3,000 unicast routes (Layer 3 switch only) Configurable maximum transmission unit (MTU) of up to 9000 bytes, with a maximum Ethernet frame size of 9018 bytes (jumbo frames) for bridging on Gigabit Ethernet ports, and up to 1998 bytes for bridging of Multiprotocol Label Switching (MPLS) tagged frames on both 10/100 and 10/100/1000 ports Connectors and cabling Indicators Dimensions (H x W x D) 10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling 100BASE-TX ports: RJ-45 connectors, two-pair Category 5 UTP cabling 1000BASE-T ports: RJ-45 connectors, four-pair Category 5 UTP cabling 1000BASE-SX, -LX/LH, -ZX SFP-based ports: LC fiber connectors (single/multimode fiber) 100BASE-LX10, -FX: LC fiber connectors (single/multimode fiber) Per-port status LED: Link integrity, disabled, activity, speed, full-duplex indications System-status LED: System, link status, link duplex, link speed, indications Cisco IE TC, Cisco IE TC-E: 6.0 W x 5.8 H x 4.4 D (152mm H x 147mm W x 112mm D) Cisco IE TC, Cisco IE TC-E: 6.0 W x 5.8 H x 4.4 D (152mm H x 147mm W x 112mm D) Cisco IEM TM=: 3.5 W x 5.8 H x 4.4 D (89mm H x 147mm W x 112mm D) Cisco IEM FM=: 3.5 W x 5.8 H x 4.4 D (89mm H x 147mm W x 112mm D) Cisco PWR-IE3000-AC=: 2.0 W x 5.8 H x 4.4 D (51 mm H x 147mm W x 112mm D) 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 5 of 9

6 Description Weight Environmental ranges Mean time between failure (MTBF) Specification Cisco IE TC, Cisco IE TC-E: 4.4 lb (2.0 kg) Cisco IE TC, Cisco IE TC-E: 4.4 lb (2.0 kg) Cisco IEM TM=: 2.2 lb (1.0 kg) Cisco IEM FM=: 3.2 lb (1.45 kg) Cisco PWR-IE3000-AC=: 1.4 lb (0.65 kg) Operating temperature: -40 to 167ºF ( 40 to 75ºC) Storage temperature: -13 to 185ºF ( 25 to 85ºC) Operating relative humidity: 10 to 95% (condensing) Operating altitude: Up to 10,000 ft (3049m) Storage altitude: Up to 15,000 ft (4573m) Cisco IE TC, Cisco IE TC-E: 363,942 Cisco IE TC, Cisco IE TC-E: 329,451 Cisco IEM TM=: 926,999 Cisco IEM FM=: 264,689 Cisco PWR-IE3000-AC=: 1,662,359 Table 4. Description Power Specifications for Cisco IE300 Series Switch Specification Maximum power consumption Input voltage and currents supported Power rating 15.1W (IE TC, IE TC-E) 15.7W (IE TC, IE TC-E) 2.8W (IEM TM=) 10.1W (IEM FM=) 18-60VDC, (Cisco IE TC, Cisco IE TC, Cisco IE TC-E and Cisco IE TC-E) VAC/88-300VDC, A, Hz (with addition of Cisco PWR-IE3000-AC=) Cisco IE TC, Cisco IE TC-E:.05KVA Cisco IE TC, Cisco IE TC-E:.05KVA Table 5. Description Management and Standards Support for Cisco IE 3000 Series Switch Specification Standards 100BASE-X (SFP) 1000BASE-X (SFP) 1000BASE-SX 1000BASE-LX/LH 1000BASE-ZX RMON I and II standards SNMPv1, SNMPv2c, and SNMPv3 100BASE-X (SFP) 1000BASE-X (SFP) 1000BASE-SX 1000BASE-LX/LH 1000BASE-ZX RMON I and II standards SNMPv1, SNMPv2c, and SNMPv3 Table 6. Description Compliance Specifications Specification Standard safety certifications UL to UL cul to CAN/CSA C22.2 No TUV/GS to EN CB to IEC with all country deviations NOM (through partners) CE Marking Industrial safety certifications UL 508 CSA C22.2 No. 142 Mechanical stability Shock 20g (operational), 30g (nonoperational) EMC interface immunity IEC [Criteria A Class 2] IEC /ENV50204 [Criteria A] IEC [Criteria A / Criteria B] IEC [Criteria B] IEC [Criteria A] 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 6 of 9

7 Description Standard electromagnetic emissions certifications Industrial electromagnetic emissions certifications Industry specifications Hazardous locations Telco Warranty Specification FCC Part 15 Class A EN 55022: 1998 (CISPR22) EN 55024: 1998 (CISPR24) VCCI Class A AS/NZS 3548 Class A CE CNS Class A MIC EN EN EN EN CISPR11 IEC IEC (Substations) IEEE1613 (Substations) NEMA TS-2 (ITSs) EN50155 (Railway) ODVA Common Industrial Protocol IEEE 1588v2 UL 1602 Class 1, Div 2 A-D CSA 22.2 / 213 Class 1, Div 2 A-D IEC EN Class 1, Zone 2 Common Language Equipment Identifier (CLEI) code One year limited warranty Service and Support Cisco is committed to minimizing total cost of ownership (TCO). The company offers a portfolio of technical support services to help ensure that its products operate efficiently, remain highly available, and benefit from the most up-todate system software. The services and support programs described in Table 7 are available as part of the Cisco Desktop Switching Service and Support solution and are available directly from Cisco and through resellers. Table 7. Cisco Services and Support Programs Service and Support Features Benefits Advanced Services Cisco Total Implementation Solutions (TIS), available direct from Cisco Cisco Packaged TIS, available through resellers Cisco SMARTnet and SMARTnet Onsite support, available direct from Cisco Cisco Packaged SMARTnet support program, available through resellers Cisco SMB Support Assistant Project management Site survey, configuration, and deployment Installation, text, and cutover Training Major moves, adds, and changes Design review and product staging Access to software updates 24 hours Web access to technical repositories Telephone support through the Cisco Technical Assistance Center (TAC) Advance replacement of hardware parts Supplements existing staff Helps ensure that functions meet needs Mitigates risk Helps enable proactive or expedited issue resolution Lowers TCO by taking advantage of Cisco expertise and knowledge Minimizes network downtime 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 7 of 9

8 Ordering Information Table 8 gives ordering information for the Cisco IE 3000 Series. Table 8. Part Number IE TC IE TC Ordering Information for Cisco IE 3000 Series Description Industrial Ethernet switch 4 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has 1 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active) Each switch supports 2 Cisco modules, 1 Cisco IEM FM= module, or 1 Cisco IEM TM= module and 1 Cisco IEM FM= module Layer 2 Lan Base image installed Industrial Ethernet switch 8 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has 1 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active) Each switch supports 2 Cisco IEM TM= modules, 1 Cisco IEM FM= module, or 1 Cisco IEM TM= module and 1 Cisco IEM FM= module Layer 2 Lan Base image installed IE TC-E IE TC-E IEM TM= IEM FM= PWR-IE3000-AC= GLC-LX-SM-RGD= GLC-SX-MM-RGD= GLC-ZX-SM-RGD= GLC-FE-100FX-RGD= GLC-FE-100LX-RGD= CAB-SM-LCSC-1M CAB-SM-LCSC-5M CF-IE3000= PWR-IE3000-CLP= PWR-IE3000-CNCT= LPNL-IE3000= RPNL-IE3000= DINCLP-IE3000= BMP-IE3000= STK-RACKMNT-2955= Industrial Ethernet switch 4 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has 1 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active) Each switch supports 2 Cisco modules, 1 Cisco IEM FM= module, or 1 Cisco IEM TM= module and 1 Cisco IEM FM= module Layer 3 IP Services image installed Industrial Ethernet switch 8 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port has 1 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active) Each switch supports 2 Cisco IEM TM= modules, 1 Cisco IEM FM= module, or 1 Cisco IEM TM= module and 1 Cisco IEM FM= module Layer 3 IP Services image installed Expansion module for Cisco IE TC-E and Cisco IE TC switches 8 10/100 TX ports Expansion module for Cisco IE TC-E and Cisco IE TC switches FX ports Expansion power module for Cisco IE TC-E and Cisco IE TC switches Supports 110/220VAC and VDC (base switches support 18VDC-60VDC) Gigabit Ethernet SFP, LC connector, LH (1Gps single mode) transceiver Gigabit Ethernet SFP, LC connector, SX (1Gps multimode) transceiver Gigabit Ethernet SFP, LC connector, ZX (1Gpbs single mode, 70km) transceiver Fast Ethernet SFP, LC connector, FX (100Mb/s multimode) transceiver Fast Ethernet SFP, LC connector, LX (100Mb/s single mode) transceiver 1m-fiber single-mode LC-to-SC connectors 5m-fiber single-mode LC-to-SC connectors IE 3000 Compact Flash IE 3000 Power Transformer Spare connector clip IE 3000 Power Spare connector IE 3000 Left Panel Spare IE 3000 Right Panel Spare Din-rail clip 4 pack Spare Din-rail clip bumper 4 pack Spare Din-rail adapter for rack mounting 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 8 of 9

9 For more information about Cisco products, contact: United States and Canada: Europe: Australia: Other: URL: Printed in USA C / Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 9 of 9

10 Cisco ME 3400E Series Ethernet Access Switches Cisco ME 3400E Series Ethernet Access Switches are next-generation Layer 2 and Layer 3 customer-located devices for service providers. Their design is based on the widely deployed Cisco ME 3400 Series Ethernet Access Switches. The Cisco ME 3400E Series helps service providers deliver four key attributes that are essential to nextgeneration Carrier Ethernet service: availability, flexibility, manageability, and security. Product Overview With service-provider-friendly features, the Cisco ME 3400E Series is the second-generation Cisco access switch optimized for Ethernet-to-the-Business (ETTB) VPN services. It provides both high availability and service flexibility for Carrier Ethernet business access deployments. The Cisco ME 3400E Series comes by default with advanced Layer 2 VPN service features and the option to upgrade to Layer 3 VPN services, giving service providers an out-of-the-box business VPN solution that can be scaled to meet future needs. The Cisco ME 3400E Series (Figure 1) includes the following configurations: Cisco ME 3400EG-12CS chassis (part number ME-3400EG-12CS-M) with 12 dual-purpose (10/100/1000 and Small Form-Factor Pluggable [SFP]) ports, four SFP uplinks, and two slots for field-replaceable modular power supply and fan unit Cisco ME 3400EG-2CS chassis (part number ME-3400EG-2CS-A) with two dual-purpose (10/100/1000 and SFP) ports, two SFP uplinks, and an integrated AC power supply Cisco ME 3400E-24TS chassis (part number ME-3400E-24TS-M) with 24 Ethernet 10/100 ports, two dual-purpose (10/100/1000 and SFP) uplinks, and two slots for field-replaceable modular power supply and fan unit Figure 1. Cisco ME 3400E Series Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 21

11 The Cisco ME 3400E Series offers two different Cisco IOS Software feature images. The METROACCESS image offers advanced quality of service (QoS), rate limiting, robust multicast control, and comprehensive security features. In addition, the METROACCESS image includes a rich set of Carrier Ethernet access features including 802.1Q Tunneling, Layer 2 Protocol Tunneling (L2PT), and Flexlink. The METROIPACCESS image adds advanced Layer 3 features such as support for advanced IP routing protocols, Multi-VPN Routing and Forwarding Customer Edge (Multi-VRF CE), and Policy Based Routing (PBR). The SFP-based Gigabit Ethernet ports accommodate a wide range of 100BASE, 1000BASE, coarse wavelength-division multiplexing (CWDM), and dense wavelength-division multiplexing (DWDM) SFP transceivers. These ports also support the Cisco Catalyst 3560 SFP Interconnect Cable for establishing a low-cost Gigabit Ethernet point-to-point connection. Service-Provider-Friendly Hardware Because Carrier Ethernet access switches are typically deployed in small spaces in office buildings or apartments, the Cisco ME 3400E Series offers a compact form factor and flexible mounting options. In addition, the Cisco ME 3400E Series has all front-accessed connectors to simplify field installation and troubleshooting. To help ensure compliance with industry standards, the Cisco ME 3400E Series has obtained both Network Equipment Building Standards Level 3 (NEBS3) and ETSI certifications. Industry-Standard Services Carrier Ethernet is a huge growth area for emerging connectivity services. It is a comparatively simple, cost-effective, and familiar technology whose migration to the WAN will lead to more flexible network connectivity while reducing overall IT costs. The Cisco ME 3400E Series is certified to Metro Ethernet Forum (MEF) 9 and 14 to support industry-standard Layer 2 services and QoS features. Gigabit Ethernet With more and more applications demanding higher bandwidth, both enterprise and residential customers want access speeds greater than 100 Mbps. To address this requirement, the Cisco ME 3400E Series offers wire-speed Gigabit Ethernet with all the Carrier Ethernet functions. At speeds of 1000 Mbps, Gigabit Ethernet provides the bandwidth to meet new and evolving network demands, alleviate bottlenecks, and boost performance while protecting the investment in existing infrastructure. Carrier Ethernet-Specific Software The Cisco ME 3400E Series software is designed specifically for the Carrier Ethernet market. Numerous new features make the Cisco ME 3400E Series the optimal access switch for service providers. Many default behaviors of the Cisco ME 3400E Series are different from those of traditional Ethernet switches, making the Cisco ME 3400E Series easier to configure, manage, secure, and troubleshoot. UNI/ENI/NNI The Cisco ME 3400E Series software introduces the concept of User-Network Interface/Enhanced Network Interface/Network-Node Interface (UNI/ENI/NNI) for Ethernet access switches. Because the software can identify the application of each port, it can provide many powerful default behaviors. Table 1 lists some of the primary behaviors and benefits of UNI/ENI/NNI Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 22

12 Table 1. UNI/ENI/NNI Default Behaviors Default Behaviors UNI/ENI default: down UNI/ENI default: no local switching UNI/ENI default: configurable control plane security enabled NNI default: up Benefits Ports must be activated by the service provider before customers can receive service. Circuit-like behavior protects customers from each other. Control-plane packets ingressing from the UNI/ENI are dropped in hardware to protect against denial-of-service (DoS) attacks by default. Unlike UNI ports, ENI ports give service providers the flexibility to selectively discard or peer with customer s control plane traffic on a per-port, per-protocol basis for the following Layer 2 protocols: Cisco Discovery Protocol, Link Layer Discovery Protocol (LLDP), Link Aggregation Control Protocol (LACP), Port Aggregation Protocol (PAgP), and Spanning Tree Protocol. Enables automated configuration of the switch through a Dynamic Host Configuration Protocol (DHCP) or BOOTP server. Flexible Deployment Options for Software Features The Cisco ME 3400E Series offers two different Cisco IOS Software feature images, METROACCESS and METROIPACCESS, providing cost-effective, pay-as-you-grow upgrade options for service providers deploying multiple services. The service providers do not have to pay for the features they do not need today and still have the option in the future to receive those features with a simple software upgrade. Support for multiple software feature images allows service providers to standardize on the Cisco ME 3400E Series, save on the operating expense of stocking multiple products, simplify training of support technicians, and alleviate the complication of supporting different products for different services. Table 2 lists the key features in the Cisco IOS Software images for the Cisco ME 3400E Series. Table 2. Key Features in Cisco IOS Software Images for Cisco ME 3400E Series METROACCESS METROIPACCESS UNI/ENI/NNI 802.1Q Tunneling, L2PT All METROACCESS features plus: Internet Group Management Protocol (IGMP) Filtering and Throttling Ethernet OAM (802.1ag, 802.3ah, E-LMI Y.1731) Static routing Multicast VLAN Registration (MVR) Configurable per VLAN MAC Learning Multi-VRF CE (VRF-lite) Advanced QoS Flexlink PBR Configurable control plane security Dynamic ARP Inspection, IP Source Guard RIP Versions 1 and 2 Configuration file security Per-Port, Per-VLAN Ingress Policing EIGRP, OSPF, and IS-IS DHCP snooping Link-State Tracking BGPv4 Private VLAN Resilient Ethernet Protocol (REP) NNI configurable on all ports IPv6 Configuration rollback Ethernet IP SLA TWAMP Source Specific Multicast DHCP-based auto configuration and image update Configurable Control Plane Queue Assignent MAC address learning and aging notifications Embedded Event Manager Source Specific Multicast mapping Multicast support for VRF (mvrf-lite) VRF-aware services (ARP, ping, SNMP, HSRP, urpf syslog, traceroute, FTP, and TFTP) Solutions for Next-Generation Business Access Services The Cisco ME 3400E Series is designed to help service providers provide service availability, service flexbility, service manageability, and service security for advanced Carrier Ethernet business access Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 3 of 22

13 Service Availability Increased service availability is a critical requirement for service provider networks because most enterprise customers expect the same level of availability from Carrier Ethernet as they have from leased-line networks. The Cisco ME 3400E Series supports redundant field-replacable integrated power supply and fan modules. To quickly activate and troubleshoot services, the Cisco ME 3400E Series offers traffic loopback capabilities so service providers can remotely verify and monitor services. Four external alarm inputs allow service providers to respond quickly to changes in the switch s environmental condtions before failure occurs. To further increase service availability on a networkwide level, Cisco ME 3400E offers Flexlink for sub-50-ms failover, Resilient Ethernet Protocol (REP), Link-State Tracking, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP), per-vlan Rapid Spanning Tree Plus (PVRST+), and the Cisco Hot Standby Router Protocol (HSRP). These capabilities help to create redundant, failsafe topologies. Strong, built-in security in three tiers network, switch, and subscriber helps prevent the device and the network from succumbing to malicious attacks, thereby enhancing network uptime. Resilient Ethernet Protocol (REP) is a Cisco proprietary protocol that provides an alternative to Spanning Tree Protocol to control network loops, handle link failures, and improve convergence time. REP enables fast and predicable reconvergence for Layer 2 networks. In addition, REP supports VLAN load balancing to enable efficient utilization of redundant links. Service Flexibility As more enterprises adopt Carrier Ethernet technology, the demand on service providers abilities to offer new services increases. The Cisco ME 3400E Series offers 1:1 VLAN translation which allows end customers the flexibility of choosing their own internal VLANs without affecting the core service provider s network. In some instances, service providers need to provide multiple EPL (Ethernet Private Line) services on a single UNI (User Network Interface). With the Selective QinQ feature, the Cisco ME 3400E Series helps service providers to offer multiple Ethernet Virtual Private Line (EVPL) services on a single UNI. To support the need for next-generation enterprise services, customers are lookings for more QoS functionalities to support differenty types of applicatoins. To meet the need for ever stringent QoS requirements from customers, the Cisco ME 3400E Series offers 2-rate 3-color policer with byte-level statistics at ingress ports and inner-toouter CoS mapping to help service providers offer differentiated services with high profit margins. Service Manageability With today s sophiscated networks, service providers are always looking for ways to reduce operational expenses (OpEx) and increase profit margins. The Cisco ME 3400E Series provides the following tools to help service providers simplify the management of their Ethernet services. Traffic loopback capabilities to help service providers activate and troubleshoot new and existing services without expensive truck rolls. The dying gasp alert for loss of power and four external alarm inputs to detect changes in remote sites further help service providers to manage the health of their equipment. And an Ethernet management port provides dedicated access for service providers to monitor and provision the switch. In addtion, the Cisco ME 3400E Series includes Generic Online Diagnostics (GOLD) and Onboard Failure Logging (OBFL) to help service providers avoid potential problems before they occur and troubleshoot and diagnose issues once they happened. With features such as Embedded Event Manager (EEM), Ethernet Operations, Administration, and Management (OAM), and Time-Domain Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 4 of 22

14 Reflectometer (TDR), the Cisco ME 3400E Series provides a comprehensive set of tools to help service providers to manage Ethernet services. Service Security As Carrier Ethernet networks expand, it is a challenge to provide the same level of security as other access technologies. Cisco ME 3400E Series switches provide a comprehensive security solution for Ethernet access networks by providing service security in three areas: subscriber, switch, and network. Subscriber security helps create protection among customers. A major concern in using a shared device for multiple customers is how to prevent customers from affecting each other. The Cisco ME 3400E Series addresses this concern with several different features. The UNI/NNI feature creates a circuit-like behavior to separate customers traffic from each other. DHCP Snooping, Dynamic ARP Inspection, and IP Source Guard help service providers identify each customer based on MAC, IP address, and port information to help prevent malicious users from spoofing fake addresses and launching man-in-the-middle attacks. Switch security is about protecting the switch itself from attacks. The Cisco ME 3400 Series offers features to protect CPU and configuration files from attacks. CPU is a critical component of an Ethernet switch that is responsible for process-control protocols and routing updates; under DoS attack, the CPU could drop those control packets, resulting in network outage. Other features such as Configurable Control Plane Security and Storm Control protect the CPU against malicious attacks. The Port Security feature allows service providers to control the number of MAC addresses each subscriber is allowed, offering protection against overwhelming the switch memory. Network security features filter all incoming traffic to help ensure that only valid traffic is allowed through the switch. Cisco ME 3400E Series switches have features such as access control lists (ACLs) and IEEE 802.1x authentication to identify the users and packets that are allowed to transmit traffic through the switch. Table 3 lists these and other key features of the security solution. Table 3. Key Features for Each Area of Comprehensive Security Solution Subscriber Security Switch Security Network Security UNI/ENI default: no local switching Configurable control plane security ACLs DHCP Snooping and IP Source Guard Storm Control IEEE 802.1x Dynamic ARP Inspection Port security UNI/ENI default: port down Private VLAN Configurable per-vlan MAC learning Configuration file security Switch Management Options The Cisco ME 3400E Series offers a superior command-line interface (CLI) for detailed configuration. In addition, the switches support CiscoWorks and Simple Network Management Protocol (SNMP) for networkwide management. Service providers can integrate the Cisco ME 3400 Series transparently into their operations support systems (OSSs) and enable improved flowthrough provisioning. Service providers can also manage the Cisco ME 3400E Series using SNMP Versions 2 and 3. A comprehensive set of MIBs is provided for service providers to collect traffic information in the Cisco ME 3400E Series Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 5 of 22

15 Ethernet Operations, Administration, Maintenance, and Provisioning The advent of Ethernet as a metropolitan and wide-area networking technology has accelerated the need for a new set of operations, administration, maintenance, and provisioning (OAM&P) protocols. Service provider networks are large and complex with a wide user base, and they often involve different operators that must work together to provide end-to-end services to enterprise customers. To answer enterprise customer demands, service providers must reduce the mean time to repair (MTTR) and increase service availability. Ethernet OAM&P features address these challenges and enable service providers to offer carrier-grade services. The Cisco ME 3400E Series supports industry-standard OAM&P tools including IEEE 802.1ag Connectivity Fault Management, IEEE 802.3ah Ethernet First Mile, and Ethernet Local Management Interface (E-LMI) protocol. IEEE 802.1ag tools to monitor and troubleshoot end-toend Ethernet networks allow service providers to check connectivity, isolate network issues, and identify customers affected by network issues. E-LMI protocol, developed by the MEF, enables service providers to communicate service configuration and status information to the customeredge device. In addition, the Cisco ME 3400E Series supports the IEEE 802.3ah Ethernet in the First Mile standard for monitoring, remote failure indication, loopback, and OAM discovery on the link between the customer equipment and the service provider network. Furthermore, the Cisco ME 3400E Series supports the ITU-T standard Y.1731, which provides fault management and complements the IEEE 802.1ag functionality. Applications Cisco ME 3400E Series switches help service providers offer a portfolio of profitable, differentiated services, including Layer 2 and Layer 3 VPN services for the ETTB market. Intelligent Ethernet Demarcation As Ethernet circuits replace TDM circuits inside of enterprise wiring closets, a replacement for the demarcation device is also needed. Service providers have traditionally relied on this type of device to separate the management responsibility. A demarcation device allows service providers to monitor and troubleshoot circuits all the way into the customer s wiring closet. The Cisco ME 3400EG-2CS Switch offers the same function for an Ethernet-based network. With support for industry-standard Ethernet OAM&P features and traffic loopback, the Cisco ME 3400EG-2CS allows service providers to monitor and troubleshoot Ethernet circuits remotely. These features greatly reduce operating expense for service providers by reducing the numbers of site visits needed to troubleshoot network problems. In addition, the Cisco ME 3400EG-2CS provides the same intelligent features such as QoS, Ethernet security, and Multicast as other switches in the Cisco ME 3400E Series. Layer 2 VPN Service Layer 2 VPN services allow customers to connect remote offices together through a service provider network without requiring private connections. The Cisco ME 3400E Series is suited for Carrier Ethernet access deployments because it offers features such as 802.1Q Tunneling and L2PT. The Cisco ME 3400E Series helps service providers offer Layer 2 VPN services to their enterprise or commercial customers (Figure 2). Typically, these switches are installed in a office building basement serving multiple customers as customer located equipment (CLE) Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 6 of 22

16 Figure 2. Layer 2 VPN Service Layer 3 VPN Service Layer 3 VPN is another popular offering from service providers. Its benefits include a single control plane over different transport technologies, advanced QoS, and high security. With the Multi-VPN Routing and Forwarding Customer Edge (Multi-VRF CE) feature, the Cisco ME 3400E Series provides a separate routing-table function for each customer to help ensure separation of customers routing information (Figure 3). Figure 3. Layer 3 VPN Service Mobile Backhaul Service With the explosion of mobile data traffic, service providers need more bandwidth in their mobile networks. Ethernet, with attributes such as simplicity, scalability, and low cost, has become the mobile backhaul solution that many service providers have turned to in order to provide the required capacity for data traffic. The Cisco ME 3400E Series provides features such as +24V DC, redundant power supplies, and an extended temperature range (up to 65 C depending on the model and configuration see Table 9 for more details), which are critical for mobile backhaul deployments. In addition, the Cisco ME 3400E Series includes Ethernet OAM and traffic loopback, which help service providers to remotely monitor and troubleshoot traffic at distant cell stations. The Cisco ME 3400E Series also helps service providers to deliver flexible Layer 2 SLAs with advanced QoS features Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 7 of 22

17 Figure 4. Mobile Backhaul Service Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 8 of 22

18 Key Features and Benefits Table 4 lists the features and benefits of the Cisco ME 3400E Series. Table 4. Feature Features and Benefits Benefit Next-generation Ethernet access switches for Carrier Ethernet market All-front access provides ease of deployment and troubleshooting in the field. Compact form factor allows for deployment in space-limited areas. Support for dual-speed SFP transceivers (100BASE and 1000BASE) provides flexible downlink/uplink options. Both AC and DC power options are available. Software is optimized for Carrier Ethernet access. Two software feature images help enable support for breadth of services. Software upgrade options allow service providers to purchase only the features needed today while retaining the option to obtain other features through simple software upgrades. Upgrade options reduce operating expense by lowering the support costs for different products and by reducing the number of different products needed for sparing. METROACCESS software feature image is designed for Layer 2 VPN services. METROIPACCESS software feature image is designed for Layer 3 VPN services. Service Breadth Intelligent Ethernet demarcation Layer 2 VPN service Layer 3 VPN service Industry-standard OAM&P 802.1ag (CFM) feature supports end-to-end network monitoring and troubleshooting. This reduces operating expense by reducing the site visits needed to troubleshoot network problems. E-LMI enables service providers to communicate service configuration and status information to the customer-edge device. Ethernet in the First Mile OAM&P (802.3ah) provides support for monitoring, remote failure indication, loopback, and OAM discovery on the link between the customer equipment and service provider network. Traffic loopback allows quick service activation and verification. Carrier-class redundancy features (Flexlink, RSTP, REP) support both hub-and-spoke and ring networks. Standard 802.1Q Tunneling creates a hierarchy of 802.1Q tags, helping service providers use a single VLAN to support customers who have multiple VLANs while preserving customer VLAN IDs and segregating traffic from different customers within the service provider infrastructure. 2-rate 3-color policer allows service providers to provide more flexible control on incoming traffic rate. 1:1 VLAN mapping gives service providers the flexibility to translate customer VLAN ID into a service provider VLAN ID to support overlapping customer VLAN IDs. Selective QinQ (1:2 VLAN mapping) enables service providers to multiplex multiple services on a single UNI (MEF EVPL for example). Inner-to-outer CoS value propagation for QinQ helps ensure that customer QoS setting is honored in the service provider network. L2PT allows for transport of the customer s control protocols, thereby allowing for transparency across the service provider s shared infrastructure. Multi-VRF CE (VRF-lite) forms virtual packet-forwarding tables by associating one or more Layer 3 interfaces with each VRF, allowing the creation of multiple Layer 3 VPNs on a single Cisco ME 3400 Series switch. Interfaces in a VRF could be either physical, as in an Ethernet port, or logical, as in a VLAN switch virtual interface (SVI), requiring the METROIPACCESS feature image. IP Multicast support in Multi-VRF CE allows customers to migrate to VRF-lite without affecting application and services that depend on IP Multicast. VRF-aware services (ARP, ping, SNMP, HSRP, urpf syslog, traceroute, FTP, and TFTP) help in managing individual VRFs. Support for multiple IP routing protocols (RIPv1/v2, EIGRP, OSPF, IS-IS, and BGPv4) offers flexible options for peering between customers and service providers Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 9 of 22

19 Feature Benefit Availability and Scalability Superior redundancy for fault backup High-performance IP routing Field-replaceable integrated power supply and fan module increases network uptime. IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) provides rapid spanning-tree convergence independent of spanning-tree timers and offers the benefit of distributed processing. Per-VLAN Rapid Spanning Tree (PVRST+) allows rapid spanning-tree reconvergence on a per-vlan spanning-tree basis, without requiring the implementation of spanning-tree instances. Cisco Hot Standby Router Protocol (HSRP) is supported to create redundant, fail-safe routing topologies. Unidirectional Link Detection Protocol (UDLD) and Aggressive UDLD allow unidirectional links caused by incorrect fiber-optic connections or port faults to be detected and disabled on fiberoptic interfaces. Flexlink provides fast failover of ports without overhead of control protocols such as the Spanning Tree Protocol. Switch-port autorecovery (errdisable) automatically attempts to reactivate a link that is disabled because of a network error. Equal-cost routing provides for load balancing and redundancy. Bandwidth aggregation up to 8 Gbps through Cisco EtherChannel technology enhances fault tolerance and offers greater aggregated bandwidth between switches and to routers and individual servers. Link-State Tracking helps accelerate Layer 3 reconvergence by taking UNI down when the associated NNI is down. Resilient Ethernet Protocol (REP) provides fast Layer 2 reconvergence in a ring network and offers an alternative to Spanning Tree Protocol. Cisco Express Forwarding hardware routing architecture delivers extremely high-performance IP routing. Basic IP Unicast routing protocols (static and RIP versions 1 and 2) are supported for smallnetwork routing applications. Advanced IP Unicast routing protocols (OSPF, EIGRP, IS-IS, and BGPv4) are supported for load balancing and constructing scalable LANs. HSRP provides dynamic load balancing and failover for routed links; up to 32 HSRP links are supported per unit. Inter-VLAN IP routing provides for full Layer 3 routing between two or more VLANs. Protocol Independent Multicast (PIM) for IP Multicast routing is supported, including PIM sparse mode (PIM-SM), PIM dense mode (PIM-DM), and PIM sparse-dense mode. The Metro IP Access image is required. Cisco recommends 128 switch virtual interfaces (SVIs). A maximum of 1000 are supported (depending on the number of routes and multicast entries). IPv6 improves the scalability of IP networks by supporting the growing number of users, applications and services. The functionalities supported include ACLs, DHCP, routing (Unicast routing, RIP, OSPFv3, static routes), MLD snooping, stateless autoconfig, default router preference, HTTP/HTTPS. Multicast Efficient multicast distribution Robust multicast control Multicast VLAN Registration provides efficient multicast distribution in ring networks by dedicating a single VLAN for multicast traffic, thereby removing duplicate multicast traffic in other VLANs. PIM-SM provides efficient routing of multicast traffic by establishing distribution trees across WANs. Source Specific Multicast (SSM) reduces the need for IP Multicast address management and prevents DoS attacks against receivers. SSM mapping provides a mapping of source to group, which allows listeners to find/connect to multicast sources dynamically, reducing dependencies on the application. IGMP Snooping helps enable intelligent management of multicast traffic by examining IGMP messages. IGMP Fast Leave provides a fast channel-changing capability for IPTV services. IGMP filtering provides control of groups each user can access. IGMP Throttling controls the maximum number of multicast groups each user can access. IGMP Proxy allows users anywhere on a downstream network to join an upstream sourced multicast group Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 10 of 22

20 Feature Benefit QoS and Control Advanced QoS Advanced traffic control The Cisco Modular QoS CLI provides a modular and highly extensible framework for deploying QoS, by standardizing the CLI and semantics for QoS features across all platforms that are supported by Cisco IOS Software. 2-rate 3-color policer enables service provider to provide more flexible QoS offerings. Standard 802.1p class of service (CoS) and differentiated services code point (DSCP) field classification are provided, using marking and reclassification on a per-packet basis by source and destination IP address, source and destination MAC address, VLAN ID, or Layer 4 TCP/UDP port number. Cisco control-plane and data-plane QoS ACLs on all ports help ensure proper marking on a per-packet basis. Shaped Round Robin (SRR) scheduling helps ensure differential prioritization of packet flows by intelligently servicing the queues. Weighted Tail Drop (WTD) provides per QoS class congestion avoidance at the queues before a disruption occurs. Strict priority queuing helps ensure that the highest-priority packets are serviced ahead of all other traffic. Priority queue rate limiting provides optional protection against lower-priority queue starvation. Configurable control plane queue assignment allows service providers to assign control plane traffic to specific egress queue. Prioritization of control plane traffic enables service providers to set QoS markings globally for CPU-generated traffic so these protocol packets will receive priority in the network. There is no performance penalty for advanced QoS functions. 1:1 VLAN mapping allows service providers to translate same VLAN IDs from different customers into different service provider VLAN IDs to separate customer traffic in the service provider network. Selective QinQ (1:2 VLAN mapping) gives service providers the ability to multiplex multiple Ethernet Private Line (EPL) services on a single UNI. Inner-to-outer CoS value propagation for QinQ honors customer QoS setting in the service provider network. Upstream and downstream traffic flows from the end station or the uplink are easily managed using ingress policing and egress shaping. Ingress policing provides bandwidth monitoring in increments as low as 8 kbps. Ingress policing is provided based on CoS, VLAN ID, DSCP, and QoS ACLs (IP ACLs or MAC ACLs) which can include source and destination IP address, source and destination MAC address, Layer 4 TCP/UDP information, or any combination of these fields. Egress Weighted Fair Queuing helps guarantee the Committed Information Rate (CIR) between traffic flows and queues. Egress shaping for each queue provides smooth traffic control of available bandwidth. Egress port rate limiting allows the service provider to control the traffic rate that is transmitted out of the port Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 11 of 22

21 Feature Benefit Network Security Comprehensive security solutions Subscriber security: IEEE 802.1x allows dynamic, port-based security by providing user authentication. IEEE 802.1x with VLAN assignment allows a dynamic VLAN assignment for a specific user regardless of where the user is connected. IEEE 802.1x and port security are provided to authenticate the port and manage network access for all MAC addresses. IEEE 802.1x readiness check simplifies deployment by generating a report for end hosts capable of 802.1x. An absence of local switching behavior provides security and isolation between UNIs, helping ensure that users cannot monitor or access other users traffic on the same switch. DHCP Snooping prevents malicious users from spoofing a DHCP server and sending out bogus addresses. This feature also prevents numerous other attacks such as Address Resolution Protocol (ARP) poisoning. Dynamic ARP Inspection helps ensure user integrity by preventing malicious users from exploiting the insecure nature of the ARP protocol. IP Source Guard prevents a malicious user from spoofing or taking over another user s IP address by creating a binding table between client s IP and MAC address, port, and VLAN. Switch security: Control Plane Security prevents DoS attacks on the CPU. Configurable control plane security on ENI gives service providers the flexibility to selectively discard or peer with customer s control plane traffic on a per-port, per-protocol basis. Secure Shell (SSH) Protocol, Kerberos, and SNMPv3 provide network security by encrypting administrator traffic during Telnet and SNMP sessions. SSH, Kerberos, and the cryptographic version of SNMPv3 require a special cryptographic software image because of U.S. export restrictions. Port security secures the access to an access or trunk port based on MAC address. After a specific timeframe, the aging feature removes the MAC address from the switch to allow another device to connect to the same port. Multilevel security on the console access prevents unauthorized users from altering the switch configuration. TACACS+ and RADIUS authentication facilitate centralized control of the switch and restrict unauthorized users from altering the configuration. Configuration File Security helps ensure that only authenticated users have access to the configuration file. MAC address learning and aging notifications allow administrators to keep track of subscriber activities. Network security: Cisco security VLAN ACLs on all VLANs prevent unauthorized data flows from being bridged within VLANs. Cisco standard and extended IP security router ACLs define security policies on routed interfaces for control-plane and data-plane traffic. Port-based ACLs for Layer 2 interfaces allow for application of security policies on individual switch ports. MAC address notification allows administrators to be notified of users added to or removed from the network. Network monitoring: Loopback allows service provider to test end-to-end traffic condition in the network. Remote Switched Port Analyzer (RSPAN) allows for remote monitoring of the user interface. Bidirectional data support on the Switched Port Analyzer (SPAN) port allows the Cisco intrusion detection system to take action when an intruder is detected Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 12 of 22

22 Feature Benefit Manageability Superior manageability CiscoWorks support The Cisco IOS CLI provides a common user interface and command set with all Cisco routers and Cisco Catalyst desktop switches. Cisco Service Assurance Agent (SAA) provides service-level management throughout the network. IEEE 802.1ag Connectivity Fault Management provides standard support for transport fault management. It allows for discovery and verification of path for Layer 2 services. Ethernet Local Management Interface enables service providers to communicate service configuration and status information to the customer-edge device IEEE 802.3ah Ethernet in the First Mile provides standard support for monitoring, remote failure indication, loopback, and OAM discovery on the link between the customer equipment and service provider network. ITU-T Y.1731 introduces the support for fault management functions, including alarm indication signal (AIS), remote defect indication (RDI) and locked signal (LCK) to detect and signal a failure in the service path. Switching Database Manager templates for Layer 2 and Layer 3 deployment allow administrators to easily optimize memory allocation to the desired features based on deployment-specific requirements. VLAN trunks can be created from any port, using standards-based 802.1Q tagging. Up to 1005 VLANs per switch and up to 128 spanning-tree instances per switch are supported VLAN IDs are supported. RSPAN allows administrators to remotely monitor ports in a Layer 2 switch network from any other switch in the same network. For enhanced traffic management, monitoring, and analysis, the embedded Remote Monitoring (RMON) software agent supports four RMON groups (history, statistics, alarms, and events). Layer 2 traceroute eases troubleshooting by identifying the physical path that a packet takes from source to destination. All nine RMON groups are supported through a SPAN port, permitting traffic monitoring of a single port, a group of ports, or the entire stack from a single network analyzer or RMON probe. Domain Name System (DNS) provides IP address resolution with user-defined device names. Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by downloading from a centralized location. Network Timing Protocol (NTP) provides an accurate and consistent time stamp to all intranet switches. The Cisco ME 3400 Series supports the Cisco CNS 2100 Series Intelligence Engine and SNMP for networkwide management. Cisco ISC applications help reduce administration and management costs by providing automated resource management and rapid profile-based provisioning capabilities. Configuration Rollback helps in error recovery by providing the capability to replace the current running configuration with any saved Cisco IOS configuration file. Embedded Events Manager (EEM) offers the ability to monitor events and take user-defined action when the monitored events occur or a threshold is reached. Dynamic Host Configuration Protocol (DHCP)-based auto configuration and image update simplifies management of large number of switches by automatically downloading specified configuration and image. Service Diagnostics automates a set of network diagnostic procedures derived from the vast troubleshooting experiences of Cisco network experts. These diagnostic tools help customers increase network uptime, reduce time to repair and improve service levels. Digital optical monitoring (DOM) support enable service providers to perform in-service transceiver monitoring and troubleshooting operations. DOM threshold functions allow the monitoring of real time optical parameters on DOM SFPs and the comparison against factoryreset values, generating alarm and warning thresholds. CiscoWorks network management software provides management capabilities on a per-port and per-switch basis, providing a common management interface for Cisco routers, switches, and hubs. SNMP Versions 1, 2c, and 3 and Telnet provide comprehensive in-band management, and a CLI-based management console provides detailed out-of-band management. Cisco Discovery Protocol Versions 1 and 2 help enable automatic switch discovery for a CiscoWorks network management station. CiscoWorks 2000 LAN Management Solution is supported Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 13 of 22

23 Product Specifications Table 5 lists product specifications for Cisco ME 3400E Series Ethernet Access Switches. Table 5. Product Specifications (preliminary data and subject to change) Description Specification Performance Forwarding bandwidth: Cisco ME 3400EG-12CS AC or DC: 32 Gbps Cisco ME 3400EG-2CS AC: 8 Gbps Cisco ME 3400E-24TS, AC or DC: 8 Gbps Forwarding rate: Cisco ME 3400EG-12CS, AC or DC: 26 mpps Cisco ME 3400EG-2CS AC: 6.5 mpps Cisco ME 3400E-24TS, AC or DC: 6.5 mpps 128 -MB DRAM and 32 MB flash memory Configurable up to 8000 MAC addresses Configurable up to 5000 unicast routes Configurable up to 1000 IGMP groups and multicast routes Configurable maximum transmission unit (MTU) of up to 9000 bytes, for bridging on Gigabit Ethernet ports, and up to 1998 bytes for bridging and routing on Fast Ethernet ports Connectors and cabling Indicators Dimensions (H x W x D) Weight Mean time between failure (MTBF) 10/100 Ports: 10/100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 unshielded twisted pair (UTP) cabling SFP Ports: 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling, 10/100/1000BASE-T operation in host systems with SGMII interface 100BASE-FX and -LX: Duplex LC receptacle fiber connectors (multimode and single-mode) 100BASE-BX: Single-fiber LC receptacle connector (single-mode fiber) 1000BASE-EX: Single Mode Fiber with DOM support 100BASE-EX: SFP module for 100 Mb port, 1310 nm wavelength, 40 km over single-mode fiber 100BASE-ZX: SFP module for 100 Mb port, 1550 nm wavelength, 80 km over single-mode fiber 1000BASE-BX: Single-fiber LC receptacle connector (single-mode fiber) 1000BASE-SX, -LX/LH, and -ZX and CWDM and DWDM: Duplex LC receptacle fiber connectors (multimode and single-mode fiber) Cisco Catalyst 3560 SFP Interconnect Cable Management console port: RJ45-to-DB9 cable for PC connections Per-port status LEDs: Link integrity, port disabled, and activity indications System-status LED Cisco ME 3400EG-12CS-M,: 1.75 x 17.5 x 12.0 in. (4.45 x 44.5 x 30.5 cm) Cisco ME 3400EG-12CS-M with AC or DC: 1.75 x 17.5 x 12.5 in. (4.45 x 44.5 x 31.8 cm) Cisco ME 3400EG-2CS AC: 1.73 x 10.6 x 7.2 in. (4.4 x 26.9 x 18.3 cm) Cisco ME 3400E-24TS-M: 1.75 x 17.5 x 9.3 in. (4.45 x 44.5 x 23.6 cm) Cisco ME 3400E-24TS-M with AC or DC: 1.75 x 17.5 x 9.8 in. (4.45 x 44.5 x 24.9 cm) Cisco ME 3400EG-12CS-M: 8.5 lb (3.9 kg) Cisco ME 3400EG-2CS AC: 3.4 lb (1.5 kg) Cisco ME 3400E-24TS-M: 6.4 lb (2.9 kg) Cisco ME 3400E AC field-replaceable unit with two integrated fans: 1.7 lb (0.77 kg) Cisco ME 3400E DC field-replaceable unit with two integrated fans: 1.8 lb (0.82 kg) Cisco ME 3400E field-replaceable unit slot cover: 0.3 lb (0.14 kg) Cisco ME 3400EG-12CS with one AC or one DC: 196,391 hours Cisco ME 3400EG-2CS AC: 526,490 hours Cisco ME 3400E-24TS with one AC or one DC: 245,917 hours Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 14 of 22

24 Power Specifications Table 6 gives power specifications for the Cisco ME 3400E Series. Table 6. Description Power Specifications (preliminary data and subject to change) Specification Power consumption AC input voltage and frequency Cisco ME 3400EG-12CS-M, one AC: 50W (typical), 80W (maximum), 171 Btus per hour (typical) Cisco ME 3400EG-12CS-M, two AC: 60W (typical), 95W (maximum), 205 Btus per hour (typical) Cisco ME 3400EG-12CS-M, one DC: 60W (typical), 99W (maximum), 205 Btus per hour (typical) Cisco ME 3400EG-12CS-M, two DC: 70W (typical), 115W (maximum), 239 Btus per hour (typical) Cisco ME 3400EG-2CS AC: 22W (typical), 30W (maximum), 75 Btus per hour (typical) Cisco ME 3400E-24TS-M, one AC: 36W (typical), 40W (maximum), 123 Btus per hour (typical) Cisco ME 3400E-24TS-M, two AC: 38W (typical), 54W (maximum), 130 Btus per hour (typical) Cisco ME 3400E-24TS-M, one DC: 38W (typical), 48W (maximum), 130 Btus per hour (typical) Cisco ME 3400E-24TS-M, two DC: 48W (typical), 72W (maximum), 164 Btus per hour (typical) Cisco ME340X-PWR- AC: 100 to 240 VAC (+/- 10% autoranging), 1.5 to 0.7A, 50 to 60 Hz DC input voltages Cisco ME340X-PWR- DC: 18 to 72 VDC, 8 to 4A (18 to 36V), 4 to 2A (36 to 72V) Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 15 of 22

25 Management and Standards Table 7 provides management and standards support information for the Cisco ME 3400E Series. Table 7. Description Management Management and Standards Specification BRIDGE-MIB (RFC1493) BGP4-MIB (RFC1657) CISCO-CABLE-DIAG-MIB CISCO-BULK-FILE-MIB CISCO-CDP-MIB CISCO-CONFIG-COPY-MIB CISCO-CONF-MAN-MIB CISCO-DATA-COLLECTION-MIB CISCO-ENVMON-MIB CISCO-ERR-DISABLE-MIB CISCO-ETHERNET-ACCESS-MIB CISCO-FLASH-MIB CISCO-FTP-CLIENT-MIB CISCO-HSRP-MIB CISCO-HSRP-EXT-MIB CISCO-IETF-DOT3-OAM-MIB CISCO-IGMP-FILTER-MIB CISCO-IPLSA-ETHERNET-MIB CISCO-PAGP-MIB CISCO-PAE-MIB CISCO-PING-MIB CISCO-PRIVATE-VLAN-MIB CISCO-PROCESS-MIB CISCO-PORT-QOS-MIB CISCO-PORT-SECURITY-MIB CISCO-PORT-STORM-CONTROL-MIB CISCO-IMAGE-MIB CISCO-LAG-MIB CISCO-L2L3-INTERFACE-CONFIG-MIB CISCO-MAC-NOTIFICATION-MIB CISCO-MEMORY-POOL-MIB CISCO-RTTMON-MIB CISCO-STACK-MIB CISCO-STP-EXTENSIONS-MIB CISCO-SYSLOG-MIB CISCO-TCP-MIB CISCO-UDLDP-MIB CISCO-VLAN-IFTABLE-RELATIONSHIP- MIB CISCO-VLAN-MEMBERSHIP-MIB ENTITY-MIB (RFC2737) ETHERLIKE-MIB IEEE8021-PEA-MIB IEEE8023-LAG-MIB IF-MIB (RFC 1573) IGMP-MIB IPMROUTE-MIB OLD-CISCO-CHASSIS-MIB OLD-CISCO-FLASH-MIB OLD-CISCO-INTERFACES-MIB OLD-CISCO-IP-MIB OLD-CISCO-SYS-MIB OLD-CISCO-TCP-MIB OLD-CISCO-TS-MIB OSPF-MIB (RFC 1253) PIM-MIB RFC1213-MIB (MIB-II) RMON-MIB (RFC 1757) RMON2-MIB (RFC 2021) SNMP-FRAMEWORK-MIB (RFC2571) SNMP-MPD-MIB (RFC 2572) SNMP-NOTIFICATION-MIB (RFC 2573) SNMP-TARGET-MIB (RFC 2573) SNMPv2-MIB (RFC 1907) SNMP-USM-MIB (SNMP-USER-BASED- SM-MIB) (RFC2574) SNMP-VACM-MIB (SNMP-VIEW-BASED- ACM-MIB) (RFC2575) TCP-MIB (RFC 2012) UDP-MIB (RFC 2013) Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 16 of 22

26 Standards and protocols IEEE 802.1s IEEE 802.1w IEEE 802.1x IEEE 802.3ad IEEE 802.3ah IEEE 802.1ag IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports IEEE 802.1D Spanning Tree Protocol IEEE 802.1p CoS classification IEEE 802.1Q VLAN IEEE BASE-T IEEE 802.3u 100BASE-T IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-X IP routing: Static, RIP versions 1 and 2, EIGRP, OSPF, BGPv4, PIM-SM, and PIM-DM (metro IP access only) IPv6: MLD Snooping v1 and v2 IPv6: RIP, OSPFv3, static routes Management: SNMP versions 1, 2, and 3 Safety and Compliance Table 8 gives safety and compliance information for the Cisco ME 3400 Series. Table 8. Type Safety and Compliance Standards Electromagnetic emissions compliance FCC Part 15 Class A EN Class A (CISPR22 Class A) EN EN GR-1089 CORE Issue 4 GR-63 CORE Issue 3 VCCI Class A AS/NZS 3548 Class A or AS/NZS CISPR22 Class A KCC CE Marking Safety UL , First Edition CUL to CAN/CSA 22.2 No , First Edition TUV/GS to EN CB report/certificate to IEC with all country deviations NOM to NOM-019-SCFI (through distributors) CE Marking NEBS GR-63-CORE and GR-1089-CORE: Level 3, Type 2 CLEI Coding ETSI EN : Storage Class 1.2, Transportation Class 2.3, In-Use Class 3.2 Noise specifications Cisco Office Product Specification: 48 dba (sound pressure) 4.8 bels (sound power) EN Operating environment Temperature: 0 to 65ºC (See table 9 for more details on model and configuration requirements. Temperature versus altitude curve follows NEBS specifications) Altitude: Up to 13,000 ft (4000m) Relative humidity: 10 to 95% noncondensing Storage environment Temperature: 40 to 70ºC Altitude: 15,000 ft (4570 m) Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 17 of 22

27 Table 9 gives operating termpature information for the Cisco ME 3400E Series. Temperature range is dependent on the SFPs used and the number of field replaceable units operating in the switch. Table 9. ME3400E Series Temperature Range Operating Temperature 0ºC to 55ºC 0ºC to 60ºC 0ºC to 65ºC PID ME- 3400EG- 2CS-A ME- 3400E- 24TS-M with 1 FRU ME- 3400EG- 12CS-M with 1 FRU ME- 3400EG- 2CS-A ME- 3400E- 24TS-M with 1 FRU ME- 3400EG- 12CS-M with 1 FRU ME- 3400EG- 2CS-A ME- 3400E- 24TS-M with 2 FRUs ME- 3400EG- 12CS-M with 2 FRUs 100M SFP GLC-FE- 100FX GLC-FE- 100LX GLC-FE- 100EX GLC-FE- 100ZX GLC-FE- 100BX-D GLC-FE- 100BX-U Yes Yes Yes Yes Yes Yes No Yes Yes Yes Yes Yes Yes Yes Yes No Yes Yes Yes Yes Yes Yes Yes Yes No Yes Yes Yes Yes Yes Yes Yes Yes No Yes Yes Yes Yes Yes Yes Yes Yes No Yes Yes Yes Yes Yes Yes Yes Yes No Yes Yes 1000M SFP GLC-SX-MM Yes Yes Yes No Yes Yes No No No GLC-LH-SM Yes Yes Yes No Yes Yes No No No GLC-ZX-SM Yes Yes Yes No Yes Yes No No No GLC-BX-D Yes Yes Yes No Yes Yes No No No GLC-BX-U Yes Yes Yes No Yes Yes No No No GLC-T Yes Yes Yes No Yes Yes No No No CWDM-xxxx- SFP DWDM-xxxx- SFP Yes Yes Yes No Yes Yes No No No Yes Yes Yes No Yes Yes No No No SFP-GE-S Yes Yes Yes Yes Yes Yes No Yes Yes SFP-GE-L Yes Yes Yes Yes Yes Yes No Yes Yes SFP-GE-T Yes Yes Yes Yes Yes Yes No Yes Yes CAB-SFP- 50CM No SFP Installed Yes Yes Yes Yes Yes Yes No Yes Yes Yes Yes Yes Yes Yes Yes No Yes Yes Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 18 of 22

28 Ordering Information Table 10 lists the ordering information for the Cisco ME 3400E Series. To place an order, visit the Cisco Ordering Home Page at: Table 10. Part Number Ordering Information Description ME-3400EG-12CS-M ME-3400EG-2CS-A ME-3400E-24TS-M ME34X-PWR-AC ME34X-PWR-DC S340XA-12244EY S340XI-12244EY CD-ME3400-A2I= RCKMNT-1RU= RCKMNT-REC-1RU= RCKMNT-ETSI-1RU= RCKMNT-19IN-1RU= RCKMNT-19-CMPCT= RCKMNT-23IN-1RU= 12 dual-purpose (10/100/1000 and SFP) ports 4 SFP-based Gigabit Ethernet and 100BASE-X ports Slots for field-replaceable power supplies and fan modules Ethernet management console 4 external alarm input contacts 26-mpps forwarding rate 1-RU multilayer switch Gigabit Ethernet access switch for the Carrier Ethernet market 2 Cisco IOS Software feature image options (METROACCESS and METROIPACCESS) 2 dual-purpose (10/100/1000 and SFP) ports 2 SFP-based Gigabit Ethernet and 100BASE-X ports One fixed AC power supply Ethernet management console 4 external alarm input contacts 6.5-mpps forwarding rate 1-RU small form-factor multilayer switch Intelligent Ethernet demarcation switch 2 Cisco IOS Software feature image options (METROACCESS and METROIPACCESS) 24 Ethernet 10/100 ports 2 SFP-based Gigabit Ethernet and 10/100/1000 dual-purpose ports Slots for field-replaceable power supplies and fan modules Ethernet management console 4 external alarm input contacts 6.5-mpps forwarding rate 1-RU multilayer switch Ethernet access switch for Carrier Ethernet market 2 Cisco IOS Software feature image options (METROACCESS and METROIPACCESS) AC power supply and fan module for ME-3400E-24TS-M and ME-3400EG-12CS-M DC power supply and fan module for ME-3400E-24TS-M and ME-3400EG-12CS-M Cisco ME 3400E Series METROACCESS software feature image Enhanced Layer 2 feature images targeted for premium triple-play services and Layer 2 VPN services Advanced Layer 2 Tunneling: 802.1q tunneling and L2PT Industry-standard Layer 2 management: 802.1ag (CFM), 802.3ah (EFM), and E-LMI Fast convergence: Flexlink, Link-State Tracking, Resilient Ethernet Protocol Layer 3 feature images targeted for Layer 3 VPN services IP routing (RIP versions 1 and 2, EIGRP, OSFP, IS-IS, and BGPv4) Secured Layer 3: Multi-VRF CE Enhanced routing: Policy Based Routing METROIPACCESS image upgrade kit for Cisco ME 3400 Series Switches with METROACCESS image Spare rack-mount kit for the Cisco ME 3400EG-12CS-M and Cisco ME 3400E-24TS-M 1-RU recessed rack-mount kit for the Cisco ME 3400EG-12CS-M and Cisco ME 3400E-24TS-M ETSI rack-mount kit for Cisco ME 3400EG-12CS-M and Cisco ME 3400E-24TS-M 19-in. NEBS rack-mount kit for all the Cisco ME3400 Series products, except the Cisco ME 3400EG-2CS 19-in. NEBS rack-mount kit for the Cisco ME 3400EG-2CS 23-in. NEBS rack-mount kit for Cisco ME 3400EG-12CS-M and Cisco ME 3400E-24TS-M Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 19 of 22

29 Part Number RCKMNT-23-CMPCT= GLC-LH-SM= GLC-SX-MM= GLC-ZX-SM= GLC-T= GLC-BX-D= GLC-BX-U= GLC-EX-SMD= GLC-FE-100FX= GLC-FE-100LX= GLC-FE-100EX= GLC-FE-100ZX= GLC-FE-100BX-U= GLC-FE-100BX-D= GLE-GE-100FX= GLC-FE-100FX24 GLC-FE-100FX48 GLC-FE-100LX48 GLC-FE-100BX-D48 SFP-GE-S= SFP-GE-L= CWDM-SFP-1470= CWDM-SFP-1490= CWDM-SFP-1510= CWDM-SFP-1530= CWDM-SFP-1550= CWDM-SFP-1570= CWDM-SFP-1590= CWDM-SFP-1610= DWDM-SFP-6061= DWDM-SFP-5979= DWDM-SFP-5898= DWDM-SFP-5817= DWDM-SFP-5655= DWDM-SFP-5575= DWDM-SFP-5494= DWDM-SFP-5413= DWDM-SFP-5252= DWDM-SFP-5172= DWDM-SFP-5092= DWDM-SFP-5012= DWDM-SFP-4851= DWDM-SFP-4772= DWDM-SFP-4692= DWDM-SFP-4612= Description 23-in. NEBS rack-mount kit for the Cisco ME 3400EG-2CS Gigabit Ethernet SFP, LC connector, and LH transceiver Gigabit Ethernet SFP, LC connector, and SX transceiver Gigabit Ethernet SFP, LC connector, and ZX transceiver Gigabit Ethernet SFP, RJ-45 connector, and 10/100/1000BASE-T transceiver 1000BASE-BX10 SFP module for single-strand SMF, 1490-nm TX/1310-nm RX wavelength 1000BASE-BX10 SFP module for single-strand SMF, 1310-nm TX/1490-nm RX wavelength 1000BASE-EX SFP 100BASE-FX SFP for Fast Ethernet port 100BASE-LX SFP for Fast Ethernet port 100BASE-EX SFP for Fast Ethernet port 100BASE-ZX SFP for Fast Ethernet port 100BASE-BX10-U SFP 100BASE-BX10-D SFP 100BASE-FX (multimode fiber) (works in multispeed Gigabit Ethernet SFP ports of other Cisco platforms such as the Cisco Catalyst 3560, Catalyst 3750 [non-metro], and Catalyst 2970 Series) 24 units of GLC-FE-100FX 48 units of GLC-FE-100FX 48 units of GLC-FE-100LX 48 units of GLC-FE-100BX-D 1000BASE-SX SFP (DOM) 1000BASE-LX/LH SFP (DOM) Cisco CWDM SFP, 1470 nm; Gigabit Ethernet and 1-/2-GB Fibre Channel (gray) Cisco CWDM SFP, 1490 nm; Gigabit Ethernet and 1-/2-GB Fibre Channel (violet) Cisco CWDM SFP, 1510 nm; Gigabit Ethernet and 1-/2-GB Fibre Channel (blue) Cisco CWDM SFP, 1530 nm; Gigabit Ethernet and 1-/2-GB Fibre Channel (green) Cisco CWDM SFP, 1550 nm; Gigabit Ethernet and 1-/2-GB Fibre Channel (yellow) Cisco CWDM SFP, 1570 nm; Gigabit Ethernet and 1-/2-GB Fibre Channel (orange) Cisco CWDM SFP, 1590 nm; Gigabit Ethernet and 1-/2-GB Fibre Channel (red) Cisco CWDM SFP, 1610 nm; Gigabit Ethernet and 1-/2-GB Fibre Channel (brown) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 20 of 22

30 Part Number DWDM-SFP-4453= DWDM-SFP-4373= DWDM-SFP-4294= DWDM-SFP-4214= DWDM-SFP-4056= DWDM-SFP-3977= DWDM-SFP-3898= DWDM-SFP-3819= DWDM-SFP-3661= DWDM-SFP-3582= DWDM-SFP-3504= DWDM-SFP-3425= DWDM-SFP-3268= DWDM-SFP-3190= DWDM-SFP-3112= DWDM-SFP-3033= CSS5-CABLX-LCSC= CSS5-CABSX-LC= CSS5-CABSX-LCSC= CAB-SFP-50CM= CAB-SM-LCSC-1M CAB-SM-LCSC-5M CAB-MCP-LC= Description Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) 1000BASE-DWDM nm (100 GHz ITU grid) 1000BASE-DWDM nm (100 GHz ITU grid) Cisco DWDM SFP nm (100 GHz ITU grid) Cisco CSS Series Content Services Switch, 10m single-mode fiber, LX LC-to-SC connectors Cisco CSS m multimode fiber, SX LC connectors Cisco CSS m multimode fiber, SX LC-to-SC connectors Cisco Catalyst 3560 SFP Interconnect Cable (50 cm) 1m single-mode fiber, LC-to-SC connectors 5m single-mode fiber, LC-to-SC connectors Mode-conditioning patch cable; LC connector Service and Support Cisco offers a wide range of services programs to accelerate customer success. These innovative services programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you protect your network investment, optimize network operations, and prepare your network for new applications to extend network intelligence and the power of your business. For more information about Cisco services, refer to Cisco Technical Support Services or Cisco Advanced Services. Cisco is committed to minimizing your total cost of ownership. Cisco offers a portfolio of technical support services to help ensure that Cisco products operate efficiently, remain highly available, and benefit from the most up-to-date system software. The services and support programs described in Table 10 are available as part of the Cisco Carrier Ethernet Switching Service and Support solution, and are available directly from Cisco and through resellers Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 21 of 22

31 Table 11. Service and Support Service and Support Features Benefits Advanced Services Cisco Total Implementation Solutions (TIS), available directly from Cisco Cisco Packaged TIS, available through resellers Cisco SP Base Support and Service Provider-Based Onsite Support, available directly from Cisco Cisco Packaged Service Provider- Based Support, available through resellers Project management Site survey, configuration, and deployment Installation, text, and cutover Training Major moves, adds, and changes Design review and product staging 24-hour access to software updates Web access to technical repositories Telephone support through the Cisco Technical Assistance Center (TAC) Advance Replacement of hardware parts Supplement existing staff Help ensure functions meet needs Mitigate risk Facilitate proactive or expedited problem resolution Lower total cost of ownership by taking advantage of Cisco expertise and knowledge Minimize network downtime Americas Headquarters Cisco Systems, Inc. San Jose, CA Asia Pacific Headquarters Cisco Systems (USA) Pte. Ltd. Singapore Europe Headquarters Cisco Systems International BV Amsterdam, The Netherlands Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco Website at CCDE, CCENT, CCSI, Cisco Eos, Cisco HealthPresence, Cisco IronPort, the Cisco logo, Cisco Nurse Connect, Cisco Pulse, Cisco SensorBase, Cisco StackPower, Cisco StadiumVision, Cisco TelePresence, Cisco Unified Computing System, Cisco WebEx, DCE, Flip Channels, Flip for Good, Flip Mino, Flipshare (Design), Flip Ultra, Flip Video, Flip Video (Design), Instant Broadband, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn, Cisco Capital, Cisco Capital (Design), Cisco:Financed (Stylized), Cisco Store, Flip Gift Card, and One Million Acts of Green are service marks; and Access Registrar, Aironet, AllTouch, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Lumin, Cisco Nexus, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, Continuum, EtherFast, EtherSwitch, Event Center, Explorer, Follow Me Browsing, GainMaker, ilynx, IOS, iphone, IronPort, the IronPort logo, Laser Link, LightStream, Linksys, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, PCNow, PIX, PowerKEY, PowerPanels, PowerTV, PowerTV (Design), PowerVu, Prisma, ProConnect, ROSA, SenderBase, SMARTnet, Spectrum Expert, StackWise, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0910R) Printed in USA C / Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 22 of 22