Phaseo power supplies

Transcription

1 ABL1, ABL7 and ABL8 Catalog 2011

2 2

3 Contents Product data website....4 Selection guides Overview Product descriptions: b ABL7/ABL8 Modular range...14 b ABL7/ABL8 Optimum range...20 b ABL8 Universal range...26 Function modules (for Universal range): v DC/DC Converter modules...36 v Buffer modules and Battery Control modules v Redundancy module b ABL1 Dedicated range b ASIABL AS-Interface range Product reference index

4 Go online to for technical information about products listed in this catalog, including: To learn more about Phaseo electronic switch mode power supply products, follow these steps Go to and enter Phaseo Power Supplies in the Search Box. 2. On the Search results page, select the first listing under Product & Technical Library entitled Power Supplies - Schneider Electric Schneider Electric On the Products page under Phaseo Regulated Switch Mode Power Supplies select from the following product lines, including: Modular, Optimum, Universal, Universal Function Modules and Dedicated Line.

5 > Specifications > Dimensions > References > Curves > Links to user guides and CAD files 4 For example...select the Phaseo Modular Line and click on Overview for Key Features and Applications Use the Product Selector to identify the Phaseo Power Supply with the right specifications to meet your requirements. 6 Select Documents & Downloads to view and select Product Brochures, Catalogs, Data Bulletins, Declarations, Handouts and Instruction Bulletins And, when you select Phaseo Universal Function Modules and click on Overview, you'll find out about the Uninterruptable Power Supply (UPS) System and the Interactive Demo.

6 Selection guide ABL7/ABL8 Modular and Optimum ranges Power supplies Regulated switch mode Phase Modular range and Optimum range industrial power supplies Input voltage Connection to United States world-wide line supplies V (in phase-to-neutral) V (in phase-to-phase) Europe V (in phase-to-neutral) V (in phase-to-phase) United States V (in phase-to-neutral) V (in phase-to-phase) IEC/EN conformity Protection against undervoltage Protection against overloads and short-circuits 100 to 240 V a 120 to 250 V c Single-phase (N-L1) or 2-phase (L1-L2) connection Single-phase (N-L1) connection Yes for ABL7RP, not for ABL8REM and not applicable for ABL8MEM and ABL7RM Yes Yes, voltage detection. Automatic restart on elimination on the detected fault Diagnostic relay Compatibility with function modules Power reserve (Boost) 1.25 to 1.4 In for 1 minute, depending on model (with ABL8MEM) No Output voltage 5 V c 12 V c 24 V c 48 V c Output current 0.3 A ABL8MEM24003 (Modular) 0.6 A ABL8MEM24006 (Modular) 1.2 A ABL8MEM24012 (Modular) 2 A ABL8MEM12020 (Modular) 2.5 A ABL7RM24025 (Modular) 3 A ABL8REM24030 (Optimum) 4 A ABL8MEM05040 (Modular) 5 A ABL7RP1205 (Optimum) 6 A 10 A ABL8REM24050 (Optimum) ABL7RP4803 (Optimum) 20 A 40 A Pages (Modular) and 20 (Optimum) 20 6 See more technical information online at

7 Selection guide ABL8 Universal range and DC/DC Converter modules Regulated switch mode Phaseo Universal range industrial power supplies ABL8DCC Function modules: Converter modules c 24 V/c 5-12 V 100 to 120 V a and 200 to 500 V a (1) 380 to 500 V a 24 V c Single-phase (N-L1) or 2-phase (L1-L2) connection 3-phase (L1-L2-L3) connection 3-phase (L1-L2-L3) connection Yes Yes Yes, current limitation or undervoltage detection Yes, current limitation Yes, depending on model Yes with buffer module, battery and battery control modules, redundancy module and discriminating downstream protection module 1.5 In for 4 seconds No 24 V c 5 V c 7 to 12 V c ABL8DCC12020 (2) ABL8RPS24030 ABL8RPS24050 ABL8DCC05060 (2) ABL8RPS24100 ABL8RPM24200 ABL8WPS24200 ABL8WPS (1) Except ABL8RPM a 100 to 120 V and a 200 to 240 V. (2) c/c converter module, requires to be associated with ABL8RP/ABL8WP power supply. See more technical information online at 7

8 Selection guide ABL1 Dedicated range Power supplies Regulated switch mode Phaseo Dedicated range power supplies for repetitive machines Input voltage Connection to United States world-wide line supplies V (in phase-to-neutral) V (in phase-to-phase) Europe V (in phase-to-neutral) V (in phase-to-phase) United States V (in phase-to-neutral) V (in phase-to-phase) 100 to 240 V a 120 to 370 V c Single-phase (N-L1) or 2-phase (L1-L2) connection Single-phase (N-L1) Single-phase (N-L1) IEC/EN conformity Yes for ABL1RP, not applicable for ABL1REM24025/12050 Protection against undervoltage Protection against overloads and short-circuits Yes, voltage detection. Automatic restart on elimination on the detected fault Diagnostic relay Compatibility with function modules Power reserve (Boost) No Output voltage 12 V c 24 V c Output current 2.5 A ABL1REM A 4.2 A ABL1RpM A 5 A ABL1REM A ABL1RpM A ABL1RPM A ABL1RpM24100 Pages 50 8 See more technical information online at

9 Selection guide AS-Interface range for AS-Interface cabling system Regulated switch mode Phaseo AS-Interface range for AS-Interface cabling system / 100 to 240 V a Single-phase (N-L1) connection Single-phase (N-L1) connection No Yes Yes Yes No 30 V c 24 V c ASIABLB3002 ASIABLD3002 (1) ASIABLM3024 (2) ASIABLM3024 (2) ASIABLB3004 (2) ASIABLD3004 (1) 56 (1) With ground fault detection. (2) One output 30 c and one output 24 c ± 5%. See more technical information online at 9

10 Overview Overview The Phaseo electronic switch mode power supply offer is designed to provide the DC voltage necessary for the PLC and automation system equipment control circuits. These power supplies include five ranges: vv Modular, Optimum and Universal ranges for common applications (ABL8 and ABL7) vvas-interface range for the AS-Interface cabling system (AS-Interface) vvdedicated range for repetitive equipment (ABL1) The Phaseo offer meets all the needs encountered in industrial, commercial and residential applications. With phase-to-neutral (N-L1), phase-to-phase (L1-L2) or 3-phase (L1-L2-L3) connection to the line supply, these electronic switch mode power supplies provide a quality of output current that is suitable for the loads supplied and compatible with the line supply available in the equipment. Clear guidelines are given for selecting protection devices which are often used with them, and thus a comprehensive solution is provided that can be used in total safety. Phaseo switch mode power supplies Phaseo switch mode power supplies are totally electronic and their output voltage is regulated. The use of electronics makes it possible to significantly improve the performance of these power supplies, which offer: bbvery compact size bbintegrated overload, short-circuit, overvoltage and undervoltage protection bbvery wide input voltage range for the Universal range bbhigh degree of output voltage stability bbgood performance bbdiagnostics via LED indicators on the front panel bbremote diagnostics via a relay contact for the Universal range Phaseo power supplies deliver a stabilized c output voltage that is precise to 3%, whatever the load from a a line supply, within the ranges of: bbfor Modular, Optimum, Dedicated and AS-Interface ranges: vv100 to 240 V a for phase-to-neutral (N-L1) or phase-to-phase (L1- L2) connection bbfor the Universal range: vv85 to 550 V a for phase-to-neutral (N-L1) or phase-to-phase (L1- L2) connection vv360 to 550 V a for 3-phase connection (L1-L2-L3) Conforming to IEC standards and UL, CSA, TÜV and C-Tick certified, they are suitable for industrial use. Phaseo power supplies also incorporate: bboutput voltage adjustment potentiometer in order to be able to compensate for any line voltage drops in installations with long cable runs b bdirect mounting on 35 mm DIN rails, optional on Dedicated range (1) (1) The Optimum and AS-Interface ranges can also take 75 mm DIN rails. 10

11 Overview (continued) Overview (continued) Phaseo switch mode power supplies (continued) Phaseo regulated switch mode industrial supplies are offered in three ranges (Modular, Optimum and Universal), complemented by the AS-Interface and Dedicated ranges for repetitive machines. ABL8MEM12020 Phaseo Modular range The Phaseo Modular range meets all the needs of simple automation systems with power ratings from 7 to 60 W and an output voltage of 5 V c, 12 V c or 24 V c. The shape and compact nature of its casing mean that it can be incorporated either in a modular panel or mounted on a DIN rail in a cabinet. Direct mounting on a panel (using its two retractable legs) and the choice of wires exiting at the top or bottom (except for the ABL7RM24025 model) make it an easy product to integrate. ABL8REM24030 Phaseo Optimum range The Phaseo Optimum range is the low-cost solution for applications supplied in 12 V c, 24 V c or 48 V c and requiring currents between 3 and 5 A. The Optimum range of Phaseo power supplies delivers a voltage that can guarantee the PLC logic states. In the event of an overload the power supply protection trips so that, once the detected fault has been eliminated, the power supply reverts to its nominal state. Since the Optimum range of Phaseo power supplies does not have PFC (Power Factor Correction), they do not meet the requirements of standard IEC/EN (except for ABL7RP1205/7RP4803 models). ABL8RPS24100 ABL8BUF24400 Phaseo Universal range The Universal range of Phaseo power supplies covers power ratings from 72 to 960 W in 24 V c and adapts to the majority of power distribution systems used throughout the world. The same power supply can thus be connected phase-to-neutral (N-L1) or phase-to-phase for line supplies ranging from 100 V a to 500 V a nominal. This product offering also includes three phase units. In addition, this range offers: bbdiagnostic functions (local or remote) bbuser choice of operating mode in the event of an overload (current limiting or stop) bbfunction modules to help ensure continuity of service: vvprotection against microbreaks or prolonged outages by means of the Buffer module and Battery Control modules vvparalleling and redundancy functions by means of the Redundancy module bbpower reserve (boost function) for absorbing the transient current peaks required by the application With the Universal range of power supplies, it is possible to satisfy the need for auxiliary voltage (5 V c to 15 V c) using c / c Converter modules. The incorporation of a PFC (Power Factor Correction) input filter reduces harmonic pollution to a minimum level across the entire Universal range, ensuring compliance with the requirements of standard IEC/EN ASIABLp30p4 ASIABLp3002 Phaseo AS-Interface range The 72 and 144 W AS-Interface range of Phaseo power supplies is designed to deliver a voltage of 30 V c, which is a prerequisite for the AS-Interface cabling system. These electronic switch mode power supplies with phase-to-neutral (N-L1) connection help ensure the quality of the output current in accordance with the electrical specifications and in compliance with standard EN ABL1RpMpp0pp ABL1RpM24100 Phaseo Dedicated range The Dedicated range of Phaseo power supplies from 60 to 240 W is designed for integration in repetitive equipment requiring a voltage of 12 V c or 24 V c. These electronic switch mode power supplies, with phase-to-neutral (N-L1) connection, with or without anti-harmonic filter and UL 508, CSA and TÜV certified, meet all the needs encountered in commercial machines and standard catalog machines. 11

12 Overview (continued) Specifications of the 24 V c operating voltage The permissible tolerances for the operating voltage are listed in publications IEC/EN and DIN For a nominal voltage Un of 24 V c, the extreme operating values are from - 15% to 20% of voltage Un, whatever the supply fluctuations in the range - 10% to 6% (defined by standard IEC 38) with load variations in the range 0 to 100% of nominal current In. All 24 V c are designed to provide an output voltage within these ranges. It may be necessary to use a voltage measurement relay to detect when the normal voltage limits are being surpassed and to deal with the consequences of this. The Universal range has integrated voltage detection. Recommendations for the use of 24 V c voltage The Phaseo power supplies can be used to supply control circuits with Protection Extra Low Voltage (PELV) or Safety Extra Low Voltage (SELV) in compliance with standard IEC/EN They have the following specifications: bbdouble insulation between the input circuit (connected to the line supply) and the low voltage output circuit via an integrated isolation transformer bbinternal device limiting the output voltage to less than 60 V in the event of an internal detected fault 12

13 Overview (continued) Harmonic pollution (power factor) The current drawn by a power supply is not sinusoidal. This leads to the generation of harmonic currents that pollute the distribution system. European standard IEC/ EN limits the harmonic currents produced by power supplies. This standard covers all devices between 75 and 1000 W, drawing up to 16 A per phase and connected directly to the public distribution system. Devices connected downstream of a private, low voltage general transformer are therefore excluded. Regulated switch mode supplies always consume harmonic currents; a filter circuit (Power Factor Correction or PFC) must therefore be added to comply with standard IEC/EN The ABL8RPS / 8RPM / 8WPS24pp0 Universal range and the ABL1RPM Dedicated range of Phaseo power supplies comply with standard EN and can therefore be connected directly to public distribution systems. Since the ABL8MEM240pp Modular range and ABL7RM24025 and ABL1REM12050/24025 Dedicated range of Phaseo power supplies have power ratings of < 75 W, they are not subject to the requirements of standard EN They can therefore be connected directly to public distribution systems. The ABL8REM Optimum range and the ABL1REM Dedicated range of Phaseo power supplies must only be connected downstream of a private, low voltage general transformer. 13

14 Introduction, description ABL7/ABL8 Modular range a ABL8MEMppppp c Zelio Logic Switch mode power supplies: Modular range The ABL8MEM/ABL7RM power supply offer is designed to provide the DC voltage necessary for the control circuits of automation system equipment consuming 7 to 60 W in 5, 12 and 24 V c. Comprised of six products, this range meets the needs encountered in industrial, commercial, and residential applications. These Modular electronic switch mode power supplies provide a quality of output current that is suitable for the loads supplied and compatible with the Zelio Logic range. Clear guidelines are given on selecting the upstream protection devices which are often used with them, and thus a comprehensive solution is provided that can be used in total safety. The Modular range of can be connected in phase-toneutral (N-L1) or in phase-to-phase (1) (L1-L2). They deliver a voltage that is precise to 3%, whatever the load and whatever the type of line supply, within a range of 85 to 264 V a. Conforming to IEC standards and UL, CSA and TUV certified, they are suitable for global use. They have overload and short-circuit protection. Due to their low power, the Modular range of Phaseo power supplies consume very little harmonic current and thus are not subject to the requirements of standard IEC/EN concerning harmonic pollution. All the Modular range of Phaseo power supplies have protection devices to help ensure optimum performance of the automation system with an automatic reset mode on elimination of the detected fault. All products are equipped with an output voltage adjustment potentiometer in order to be able to compensate for any line voltage drops in installations with long cable runs. These power supplies also have a cable channel on the side of the unit so that the output wires can be directed to the top or bottom of the product as required. They are designed for direct mounting on 35 mm DIN rails, or on a panel using their retractable mounting legs. There are six references available in the Phaseo Modular range: bbabl8mem W 0.3 A 24 V c bbabl8mem W 0.6 A 24 V c bbabl8mem W 1.2 A 24 V c bbabl7rm W 2.5 A 24 V c bbabl8mem W 4 A 5 V c bbabl8mem W 2 A 12 V c (1) 240 V a nominal. Description ABL8MEMpppp 7 1 ABL7RM AWG (2.5 mm 2 ) screw terminal for connection of the AC input voltage 2 Output voltage adjustment potentiometer 3 14 AWG (2.5 mm 2 ) screw terminal for connection of the output voltage 4 LED indicating presence of the DC output voltage 5 Channel for through-wiring of the output voltage conductors at the bottom (except for model ABL7RM24025) 6 Clip-on marker label (except for model ABL7RM24025) 7 Retractable mounting legs for panel mounting 14

15 Specifications ABL7/ABL8 Modular range Technical specifications Power supply type ABL8MEM24003 ABL8MEM24006 ABL8MEM24012 ABL7RM24025 Certifications culus 508, ccsaus (CSA22.2 n950-1), TÜV , e, CTick, RoHS Conformity to standards Safety IEC/EN , SELV Input circuit LED indication EMC Input values Nominal voltage V 100 to 240 Vac Output circuit LED indication Limit voltage V 85 to 264 Vac 120 to 250 Vdc (1) Current consumption A 0.25 (100 Vac) 0.18 (240 Vac) Permissible frequencies Hz 47 to 63 IEC/EN , IEC/EN , IEC/EN , EN Class B No 0.4 (100 Vac) 0.25 (240 Vac) 0.65 (100 Vac) 0.4 (240 Vac) 85 to 264 Vac 1.2 (120 Vac) 0.7 (240 Vac) Maximum inrush current A for 1 ms Power factor > 0.5 Efficiency at nominal load > 78% > 80% > 82% > 84% Dissipated power at nominal load W Green LED Nominal output values Voltage (UOut) V 24 Vdc Current A Power W Precision Output voltage V Adjustable from 22.8 to 28.8 Vdc Line and load regulation ± 3% Residual ripple - noise mv Holding time for I max. UIn = 100 Vac ms u 10 UIn = 230 Vac ms u 150 Protection Against short circuits Permanent Against undervoltages V < 19 Thermal Yes Operating and environmental specifications Connections Input AWG (mm 2 ) 26 to 14 (2 x 0.14 to 2.5) screw terminals Output AWG 26 to 14 (2 x 0.14 to 2.5) 26 to 14 (4 x 0.14 to 2.5) screw terminals (mm 2 ) screw terminals Mounting On DIN rail, 35 x 7.5 mm and 35 x 15 mm or on panel (2 x ø 4 mm) Operating position On vertical plane Vertical Connections Series Possible Parallel Possible Environment Operating temperature F ( C) -13 to 158 derating from 131 F (-25 to 70 derating from 55 C), -13 to 131 F (-25 to 55 C) Storage temperature F ( C) -40 to 158 F (-40 to 70 C) Relative humidity 90% during operation, 95% in storage Degree of protection IP 20 conforming to IEC Vibration per to EN to 11.9 Hz, amplitude 0.14 in. (3.5 mm); and Hz, acceleration 2 g Protection class according to VDE Class II Dielectric strength 50 Hz for Input/output V rms 3000 Vac 1 min Input fuse incorporated Yes (not interchangeable) Emissions EN (generic) according to EN Radiation EN Class B Conducted on the power line EN Class B Harmonic currents IEC/EN Immunity IEC (generic) according to EN Electrostatic discharge IEC/EN (6 kv contact/8 kv air) IEC/EN (4 kv contact/8 kv air) Radiated electromagnetic fields IEC/EN level 3 (10 V/m) Induced electromagnetic fields IEC/EN level 3 (10 V/m) Rapid transients IEC/EN (4 kv) Surges IEC/EN (1 kv) Primary outages IEC/EN (voltage dips and interruptions) (1) DC input voltages are not included in culus, ccsaus, and TÜV certifications. 15

16 Specifications (continued) ABL7/ABL8 Modular range Technical specifications Power supply type ABL8MEM05040 ABL8MEM12020 Certifications culus 508, ccsaus (CSA22.2 n950-1), TÜV EN , e, CTick, RoHS Conformity to standards Safety IEC/EN , SELV EMC IEC/EN , IEC/EN , IEC/EN , EN Class B Input circuit LED indication Input values Output circuit LED indication Nominal output values Precision Holding time for I max Protection No Nominal voltage V 100 to 240 Vac Limit voltage V 85 to 264 Vac 120 to 250 Vdc (1) Current consumption A 0.55 (100 Vac) 0.35 (240 Vac) 0.6 (100 Vac) 0.35 (240 Vac) Permissible frequencies Hz 47 to 63 Maximum inrush current A 20 Power factor > 0.5 Efficiency at nominal load > 75% > 80% Dissipated power at nominal load W Green LED Voltage (UOut) V 5 Vdc 12 to 15 Vdc Current A Power W Output voltage V Adjustable from 4.75 to 6.25 Adjustable from 11.4 to 15 Line and load regulation ± 3% Residual ripple - noise mv 250 UIn min ms u 10 Against short circuits Permanent Against undervoltages Thermal Operating and environmental specifications Connections Input Output AWG (mm 2 ) AWG (mm 2 ) 26 to 14 (2 x 0.14 to 2.5) screw terminals 26 to 14 (4 x 0.14 to 2.5) screw terminals Mounting On DIN rail, 35 x 7.5 mm and 35 x 15 mm or on panel (2 x ø 4 mm) Operating position On vertical plane Vertical Connections Series Possible Parallel Possible Operating temperature F ( C) -13 to 158 derating from 131 F (-25 to 70 derating from 55 C) Storage temperature F ( C) -40 to 158 F (-40 to 70 C) Environment Maximum relative humidity 90% during operation 95% in storage Degree of protection IP 20 conforming to IEC Vibration 3 to 11.9 Hz, amplitude 0.14 in (3.5 mm); and Hz, acceleration 2 g Protection class according to VDE Class II Dielectric strength 50 Hz for 1 min Input/output V rms 3000 Vac Input fuse incorporated Yes (not interchangeable) EN (generic) Emissions Radiation EN Class B according to EN Conducted on the power line EN Class B Harmonic currents IEC/EN IEC (generic) Electrostatic discharge IEC/EN (6 kv contact/8 kv air) Radiated electromagnetic fields IEC/EN level 3 (10 V/m) Immunity Induced electromagnetic fields IEC/EN level 3 (10 V/m) according to EN Rapid transients IEC/EN (4 kv) Surges IEC/EN (1 kv) Primary outages IEC/EN (voltage dips and interruptions) (1) DC input voltages are not included in culus, ccsaus, and TÜV certifications. 16

17 Specifications (continued) ABL7/ABL8 Modular range Output specifications Behavior when short circuits and overloads occur are equipped with an electronic protection device. When an overload or short circuit occurs, the integrated protection interrupts the current supply before the output voltage drops below 19 V. The output voltage reverts to its nominal value upon elimination of the detected fault, eliminating the need to take any action. Derating The ambient temperature is a determining factor which limits the power that an electronic power supply can deliver continuously. Excessively high temperatures around the electronic components significantly reduce their life. The nominal ambient temperature for the Modular range of Phaseo power supplies is 131 F (55 C). Above this temperature, derating is necessary up to a maximum temperature of 158 F (70 C) (except for the ABL7RM24025 model). P/Pn (%) 100 % 1 2 The graph to the left shows the power as a percentage of the nominal power that the power supply can deliver continuously, depending on the ambient temperature. 30 % - 13 (- 25) 23 (- 5) 59 (15) 95 (35) 131 (55) 158 (70) 167(75) Maximum operating temperature, F ( C) 1 With an ABL7RM With an ABL8MEMppppp Temporary overloads The ABL8MEMpppp Modular range of power supplies have an energy reserve that can be used to supply the application with 125% to 140% of the nominal output current for a maximum of 1 minute, depending on the model. Series or parallel connection Series connection Parallel connection ABL7RM ABL8MEM ABL7RM ABL8MEM ABL7RM ABL8MEM ABL7RM ABL8MEM x 24 Vdc/I out 24 Vdc/2 x I out 1 Two shottky diodes, Imin = power supply In, and Vmin = 50 V Family Series Parallel ABL7RM / 8MEM 2 products max. 2 products max. NOTE: Series or parallel connection is recommended only for products with identical catalog numbers. 17

18 Protection, wiring diagrams ABL7/ABL8 Modular range Selection of protection for the power supply primary Type of line supply 100 to 240 V a single-phase Type of protection Thermal-magnetic circuit-breaker Class CC fuse GB2 (IEC) C60N (IEC) C60N (UL/CSA) ABL8MEM05040 GB2 pp07 (1) A ABL8MEM12020 ABL8MEM24003 ABL8MEM24006 ABL8MEM24012 ABL7RM24025 GB2 pp08 (1) A (1) Complete the reference by replacing pp as required: - CB for single-pole circuit-breaker with magnetic trip threshold 12 to 16 In - CD for single-pole neutral circuit-breaker with magnetic trip threshold 12 to 16 In - DB for 2-pole circuit-breaker with magnetic trip threshold 12 to 16 In - CS for single-pole circuit-breaker with magnetic trip threshold 5 to 7 In Wiring diagrams GB2CBpp GB2CDpp GB2DBpp GB2CSpp 2/T1 1/L1 4/T2 (14) 3/L2 (13) 2/T1 1/L1 2/T1 1/L1 4/T2 3/L2 2/T1 1/L1 18

19 References, dimensions, wiring diagrams ABL7/ABL8 Modular range References ABL8MEM05040/12020/24012 Input voltage Secondary Reset Conforming Output Nominal Nominal to standard voltage power current IEC/EN (1) Single-phase (N-L1) or 2-phase (L1-L2) connection 100 to 240 V -15%, 10% 50/60 Hz Reference Weight lbs (kg) 5 V c 20 W 4 A Automatic Not applicable ABL8MEM (0.23) 12 V c 25 W 2 A Automatic Not applicable ABL8MEM (0.23) 24 V c 7 W 0.3 A Automatic Not applicable ABL8MEM (0.13) 15 W 0.6 A Automatic Not applicable ABL8MEM (0.13) ABL8MEM24003/ W 1.2 A Automatic Not applicable ABL8MEM (0.23) 60 W 2.5 A Automatic Not applicable ABL7RM (0.32) Designation Use Order in multiples of Unit reference Weight lbs (kg) Clip-on marker Replacement parts for ABL8MEM power supplies 100 LAD labels (0.03) ABL7RM24025 (1) Due to their power < 75 W, the Modular range of power supplies is not subject to the requirements of standard IEC/EN Approximate dimensions ABL8MEMppppp / ABL7RM24025 power supply a a (90) (100) ABL8MEM (53) 1.65 (42) ABL8MEM (53) 1.65 (42) ABL8MEM (36) 0.94 (24) ABL8MEM (36) 0.94 (24) ABL8MEM (53) 1.65 (42) ABL7RM (72) 2.36 (60) (44) (4) a (59) a in (mm) Wiring diagrams ABL8MEM2400p ABL8MEM05040 / 8MEM12020 / 8MEM24012 / 7RM24025 L N L (110) N 19

20 Introduction, description ABL7/ABL8 Optimum range a ABL8REM24030 c Twido Switch mode power supplies: Optimum range The ABL8REM/7RP power supply offer is designed to provide the DC voltage necessary for the control circuits of automation system equipment consuming 60 to 144 W in 12, 24 and 48 V c. Comprised of four products, this range meets the needs encountered in industrial, commercial, and residential applications. With phase-to-neutral (N-L1) or phase-to-phase (1) (L1-L2) connection, these slim electronic switch mode power supplies provide a quality of output current that is suitable for the loads supplied and compatible with both the Twido range and the smallest Modicon M340 configurations, making them ideal partners. Their simplified specifications in comparison with the Universal offer also make them the low-cost solution for applications less affected by problems with the line supply, such as harmonic pollution and outages. Clear guidelines are given on selecting the upstream protection devices which are often used with them, and thus a comprehensive solution is provided that can be used in total safety. The Optimum range of delivers a voltage that is precise to 3%, whatever the load and whatever the type of line supply, within a range of 85 to 264 V a. Conforming to IEC standards and UL, CSA and TUV certified, they are suitable for global use. They have overload and short-circuit protection. ABL8REM power supplies do not have anti-harmonic filters and do not satisfy the requirements of standard IEC/EN concerning harmonic pollution. ABL7RP power supplies, however, are equipped with a PFC (Power Factor Correction) filter, thus ensuring compliance with standard IEC/EN The Optimum range of Phaseo power supplies includes protection devices to help ensure optimum performance of the automation system with an automatic reset mode on elimination of the detected fault. In the event of an overload or short-circuit, the integrated protection interrupts the current supply before the output voltage drops below 19 V c. The protection device resets itself automatically on elimination of the detected fault, which avoids having to take any action or change a fuse. All products are equipped with an output voltage adjustment potentiometer in order to be able to compensate for any line voltage drops in installations with long cable runs. These power supplies are designed for direct mounting on 35 and 75 mm DIN rails. There are four references available in the Optimum range of Phaseo power supplies: bbabl8rem W 3 A 24 V c bbabl8rem W 5 A 24 V c bbabl7rp W 5 A 12 V c bbabl7rp W 3 A 48 V c Description 1 14 AWG (2.5 mm 2 ) enclosed screw terminals for connection of the input voltage (single-phase N-L1, phase-to-phase L1-L2 (1)) 2 Protective glass flap 3 Input voltage status LED (orange). 4 Output DC voltage status LED (green). 5 Locking catch for the glass flap (sealable) 6 Clip-on marker label. 7 Output voltage adjustment potentiometer 8 14 AWG (2.5 mm 2 ) enclosed screw terminal block for connection of the DC output voltage (1) 240 V a nominal 8 20

21 Specifications ABL7/ABL8 Optimum range Technical specifications Type of power supply ABL7RP1205 ABL7RP4803 ABL8REM24030 ABL8REM24050 Certifications Conformity to standards Input circuit LED indication Input values Output circuit LED indication Nominal output values Precision culus 508, ccsaus (CSA22.2 n950-1), File Class, TÜV , e, CTick, RoHS Safety IEC/EN 60950, IEC/EN , SELV IEC/EN 60950, SELV EMC EN , IEC (EN ) Nominal voltage Limit voltage Current consumption V V Orange LED 100 to 240 Vac compatible with 110 to 220 Vdc (1) 85 to 264 Vac compatible with 100 to 250 Vdc (1) 100 to 240 Vac compatible with 110 to 220 Vdc (1) 85 to 264 Vac single-phase compatible with 100 to 250 Vdc (1) UIn = 240 Vac A UIn = 100 Vac A Permissible frequencies Hz 47 to 63 Maximum inrush current A 30 Power factor 0.98 approx approx. Efficiency at nominal load > 85% Dissipated power at nominal load W Green LED Voltage (UOut) V 12 Vdc 48 Vdc 24 Vdc Current A Power W Output voltage Adjustable from Adjustable from V 12 to 14.4 Vdc 48 to 57.6 Vdc Adjustable from 24 to 28.8 Vdc Line and load regulation ± 3% Residual ripple - noise mv < 200 (peak-peak) Holding time for I max UIn = 240 Vac ms UIn = 100 Vac ms Protection Against short circuits Permanent/automatic or manual restart Permanent/automatic restart Against overloads 1.1 In Against overvoltages Tripping if UOut > 1.5 Un Against undervoltages Tripping if UOut < 0.8 Un Operating and environmental specifications Connections Input AWG (mm 2 ) 26 to 14 (2 x 0.14 to 2.5) screw terminals ground Output AWG (mm 2 ) 26 to 14 (2 x 0.14 to 2.5) screw terminals ground, multiple output, depending on model Mounting On DIN rail in (mm) 1.38 x.30, 1.38 x.59 and 2.95x.30 (35 x 7.5, 35 x 15 and 75 x 7.5) Operating position On vertical plane Vertical Connections Series Possible Parallel Possible Degree of protection IP 20 conforming to IEC Environment Operating temperature F ( C) 32 to 140 derating from 122 F (0 to 60 derating from 50 C) Storage temperature F ( C) -13 to 158 F (-25 to 70 C) Maximum relative humidity 95% without condensation or dripping water Vibration per to EN to 11.9 Hz, amplitude 0.14 in (3.5 mm); and 11.9 to 150 Hz, acceleration 2 g Protection class according to VDE Class I Dielectric strength 50 and 60 Hz for 1 min Input/output V rms 3000 Vac Input/ground V rms 3000 Vac Output/ground (and output/output) V rms 500 Vac Input fuse incorporated Yes (not interchangeable) Emissions EN (generic) according to EN Conducted/radiated EN 55011/EN cl. B Immunity IEC (generic) according to Electrostatic discharge IEC/EN (6 kv contact/8 kv air) EN Radiated electromagnetic fields IEC/EN level 3 (10 V/m) Induced electromagnetic fields IEC/EN level 3 (10 V/m) Rapid transients EN level 3 (2 kv) Surges IEC/EN (2 kv) Primary outages IEC/EN (voltage dips and interruptions) (1) DC input voltages are not included in culus, ccsaus, and TÜV certifications. 21

22 Specifications (continued) ABL7/ABL8 Optimum range Output specifications Derating The ambient temperature is a determining factor which limits the power that an electronic power supply can deliver continuously. Excessively high temperatures around the electronic components significantly reduce their life. The nominal ambient temperature for the Optimum range is 122 F (50 C). Above this temperature, derating is necessary up to a maximum temperature of 140 F (60 C). The graph below shows the power as a percentage of the nominal power that the power supply can deliver continuously, depending on the ambient temperature (0) 50 (10) 68 (20) 86 (30) 104 (40) 122 (50) 140 (60) 158 (70) Maximum operating temperature F ( C) 1 ABL8REM, ABL7RP mounted vertically Derating should be considered in extreme operating conditions: bbintensive operation (output current permanently close to the nominal current, combined with a high ambient temperature) b boutput voltage set above 24 Vdc (to compensate for line voltage drops, for example) bbparallel connection to increase the total power General rules 1.97 (50) Intensive operation See derating in above graph. Example for ABL8REM: bb Without derating, from 32 to 122 F (0 to 50 C) bb Derating of nominal current by 2% per additional C, up to 60 C. See chart (10) AUTO MANU 0.59 (10) Rise in output voltage Parallel connection to increase the total power The nominal power is mounted. Increasing the output voltage means that the current delivered must be reduced. The total power is equal to the sum of the power supplies used, but the maximum ambient temperature for operation is 122 F (50 C). To improve heat dissipation, the power supplies must not be in contact with each other (50) in (mm) In all cases, there must be adequate convection around the products to assist cooling. There must be sufficient clearance around the Optimum range Phaseo power supplies: bb1.97 inches (50 mm) above and below bb0.59 inches (15 mm) on the sides 22

23 Specifications (continued) ABL7/ABL8 Optimum range Output specifications (continued) Load limit ABL8REM240pp / ABL7RPpppp Temporary overloads ABL8REM / ABL7RP U out T (ms) 20 I out I out:( %) 24 Vdc Vdc In 1.1 x In I out x In Series or parallel connection Series connection Parallel connection ABL7RP ABL8REM ABL7RP ABL8REM ABL7RP ABL8REM ABL7RP ABL8REM x 24 Vdc/I out 24 Vdc/2 x I out 1 Two shottky diodes, Imin = power supply In, and Vmin = 50 V Family Series Parallel ABL8REM / 7RP 2 products max. 2 products max. Series or parallel connection is recommended only for products with identical catalog numbers. T (ms) I out 20 I out:( %) I out x In 23

24 Protection, wiring diagrams ABL7/ABL8 Optimum range Selection of protection for the power supply primary Type of line supply (Single Phase) 100 V a 240 V a Type of protection Thermal-magnetic circuit-breaker GB2 (IEC) C60N (IEC) C60N (UL) ABL7RP1205 GB2 pp06 (1) Class CC fuse Thermal-magnetic circuit-breaker GB2 (IEC) C60N (IEC) C60N (UL) 2 A GB2 pp06 (1) Class CC fuse 1 A ABL8REM24030 GB2 pp07 (1) ABL8REM24050 GB2 pp07 (1) ABL7RP4803 GB2 pp07 (1) A GB2 pp06 (1) A GB2 pp06 (1) A GB2 pp06 (1) A 1 A 1 A (1) Complete the reference by replacing pp with CB for single-pole circuit-breaker with magnetic trip threshold 12 to 16 In CD for single-pole neutral circuit-breaker with magnetic trip threshold 12 to 16 In DB for 2-pole circuit-breaker with magnetic trip threshold 12 to 16 In CS for single-pole circuit-breaker with magnetic trip threshold 5 to 7 In Wiring for GB2pp0p thermal-magnetic circuit protectors GB2CBpp GB2CDpp GB2Dpp GB2CSpp 2/T1 1/L1 4/T2 (14) 3/L2 (13) 2/T1 1/L1 2/T1 1/L1 4/T2 3/L2 2/T1 1/L1 24

25 References, dimensions, wiring diagrams ABL7/ABL8 Optimum range : Phaseo Optimum range Input voltage Secondary Reset Conforming Output Nominal Nominal to standard voltage power current CEI/EN Single-phase (N-L1) or phase-to-phase (L1-L2) connection 100 to 240 V a - 15%, 10% 50/60 Hz 12 V c 60 W 5 A Automatic or manual Reference Weight lbs (kg) Yes ABL7RP (1.08) ABL7RP1205/ V c 72 W 3 A Automatic No ABL8REM (0.55) 120 W 5 A Automatic No ABL8REM (0.79) ABL8REM24030 ABL8REM V c 144 W 2.5 A Automatic or manual Yes ABL7RP (1.08) Approximate dimensions ABL7RPpppp Common side view Mounted on 35 and 75 mm DIN rails ABL8REM24030 ABL7RP1205/4803 ABL8REM (120) (120) (120) (54) (54) in (mm) Wiring diagrams ABL7RP1205 / ABL8REM24030 ABL8REM24050 N/ L/ L N N L 4.92 (125) (27) 25

26 Introduction ABL8 Universal range a c ABL8RPS24050 Modicon M340 automation platform Switch mode power supplies: Universal range The ABL8RPS/RPM/WPS power supply offer is designed to provide the DC voltage necessary for the control circuits of automation system equipment. Comprised of six products, this range meets the needs encountered in industrial and commercial applications. These compact electronic switch mode power supplies provide a quality of output current that is suitable for the loads supplied and compatible with the Modicon M340, Premium and Quantum ranges. When used with additional function modules, they help ensure continuity of service in the event of network power outages or application malfunctions. Clear guidelines are given on selecting the function modules and upstream protection devices which are often used with them, and thus a comprehensive solution is provided that can be used in total safety. The Universal range of must be connected in phase-to-neutral or phase-to-phase for ABL8RPS/RPM, and in three-phase for ABL8WPS. They deliver a voltage that is precise to 3%, whatever the load and whatever the type of line supply, within the ranges: bb85 to 132 V a and 170 to 550 V a for ABL8RPS bb85 to 132 V a and 170 to 264 V a for ABL8RPM bb340 to 550 V a for ABL8WPS Their very wide input voltage range allows a considerable reduction of parts held in stock and offers a distinct advantage in terms of machine design. Conforming to IEC standards and UL and CSA certified, they are suitable for global use. ABL8RPS/RPM and ABL8WPS power supplies are all equipped with a harmonic filter, ensuring compliance with standard IEC/EN concerning harmonic pollution. All the Universal range of Phaseo power supplies have protection devices to help ensure optimum performance of the automation system. Their operating mode can be configured as required by the user: vvmanual reset protection mode: Priority is given to the voltage so as to guarantee the PLC logic states and nominal operation of the supplied actuators. vvautomatic reset protection mode: Priority is given to the current to allow troubleshooting for example, or to help ensure continuity of service until the arrival of the maintenance team. The Universal range of Phaseo power supplies also has a power reserve, allowing them to deliver a current of 1.5 In at regular intervals. This avoids the need to oversize the power supply if the device has a high inrush current, while ensuring optimum performance of the automation system. The diagnostics for the Universal range of Phaseo power supplies are available on the front of the device via LEDs (UOut and IOut) and via a dry contact relay. All products are equipped with an output voltage adjustment potentiometer in order to be able to compensate for any line voltage drops in installations with long connection cable runs. These power supplies are designed for direct mounting on a 35 mm DIN rail. 26

27 Introduction (continued), description ABL8 Universal range a ABL8WPS24200 Switch mode power supplies: Universal range (continued) There are four references available in the Universal range of Phaseo power supplies for phase-to-neutral or phase-to-phase connection: b babl8rps W 3 A 24 V c bbabl8rps W 5 A 24 V c bbabl8rps W 10 A 24 V c bbabl8rpm W 20 A 24 V c The Universal range of Phaseo power supplies also features two references for three-phase connection: bbabl8wps W 20 A 24 V c bbabl8wps W 40 A 24 V c c Modicon Premium automation platform A range of function modules also allows functions to be added to the Universal range of Phaseo power supplies so as to help ensure continuity of service: vvbuffer module or Battery Control modules combined with batteries to help ensure continuity of service in the event of a network power outage vvredundancy module to meet the most demanding requirements for continuity of service even if the power supply fails vvconverter modules delivering nominal voltages of 5 and 12 V c from the 24 V c output of the Universal range of Phaseo power supplies Description Universal range of power supplies The Universal range of Phaseo regulated switch mode power supplies, ABL8RPS24pp0/RPM24200/WPS24p00, is comprised of: 1 Spring clip for 35 mm DIN rail 2 12 AWG (4 mm 2 ) enclosed screw terminals for connection of the AC voltage (single-phase, phase-to-phase or three-phase connection) 3 Protective glass flap 4 Clip-on marker label 5 Locking catch for the glass flap (sealable) 6 Protection mode selector 7 Output voltage adjustment potentiometer 8 Output voltage status LED (green and red) (1) 9 Output current status LED (green, red and orange) 10 Screw terminals for connection of the diagnostic relay contact, except ABL8RPS AWG (4 mm 2 ) [8 AWG (10 mm 2 ) on ABL8WPS24p00 and ABL8RPM24200] enclosed screw terminals for connection of the DC output voltage (1) See "LED Descriptions" on page

28 Specifications ABL8 Universal range Technical specifications Type of power supply ABL8RPS24030 ABL8RPS24050 ABL8RPS24100 ABL8RPM24200 Certifications Conformity to standards Input circuit Input values phase-to-neutral (N-L1) or phase-to-phase (L1-L2) Anti-harmonic filtering Output circuit CB scheme EN , culus 508, ccsaus, e, RoHS Safety IEC/EN , EN 61204, SELV EMC EN , EN , EN , EN , EN Nominal voltage V 100 to 120 / 200 to 500 Vac 100 to 120 / 200 to 240 Vac Limit voltage V 85 to 132 / 170 to 550 Vac 85 to 132 / 170 to 264 Vac Permissible frequencies Hz 47 to 63 Maximum inrush current A 30 for 2 ms max. Power factor 0.59 at 120 Vac / 0.51 at 240 Vac 0.69 at 120 Vac / 0.68 at 240 Vac Efficiency at nominal load > 87 % > 88 % Dissipated power at nominal load W Yes, via integrated PFC passive filter Compatibility with function modules Buffer, battery and battery control unit, and redundancy LEDs on front panel Current (green, orange, and red), voltage (green, red, and off) Diagnostics Relay closed UOut > 21.6 V Relay contact 230 Vac, 0.5 A max; 24 Vdc, 5 ma min Nominal output voltage (UOut) V 24 Vdc Nominal output values Current A Power W Permissible temporary inrush current (boost) A 1.5 In for 4 s maximum Nominal output voltage (UOut) V Adjustable 24 to 28.8 Vdc Precision Line and load regulation 1 % to 3 % Residual ripple - noise mv < 200 (peak-peak) UIn = 100 Vac ms u 20 Holding time for I max. UIn = 240 Vac ms u 40 UIn = 400 Vac ms u 120 Against short circuits Permanent, automatic or manual restart Against overloads < 1.10 In (after boost function) Protection Against overvoltages V 30 to 32 Vdc Against undervoltages V Tripping if UOut < 21.6 (in manual mode) Thermal Yes LED Descriptions U out I out 21.6 V y Uout Iout y In 7 V y Uout < 21.6 V Uout < 7 V In y Iout Power supply shut off State of protection 0 V / 0 A / / / OFF Green Orange Red 28

29 Specifications (continued) ABL8 Universal range Operating and environmental specifications Type of power supply ABL8RPS24030 ABL8RPS24050 ABL8RPS24100 ABL8RPM24200 Connections Input Output Diagnostic relay AWG (mm 2 ) AWG (mm 2 ) AWG (mm 2 ) 22 to 12 (2 x 0.5 to 4) screw terminals ground terminal 24 to 10 (4 x 0.5 to 4) screw terminals ground terminal 14 (2 x 2.5) removable screw terminal block Mounting On DIN rail in/mm 1.38 x 0.30 and 1.38 x 0.59 (35 x 7.5 and 35 x 15) Operating position Connections Series Parallel Vertical Possible Possible Degree of protection IP 20 conforming to IEC Environment Operating temperature F ( C) -13 to 140 derating from 122 F (-25 to 60 derating from 50 C) Storage temperature F ( C) -40 to158 F (-40 to 70 C) Maximum relative humidity Vibration per to EN Protection class According to VDE Class I Dielectric strength 50 Hz for 1 min Input fuse incorporated Emissions according to EN Immunity according to EN and GL 90% during operation, 95% in storage 3 to 11.9 Hz, amplitude 0.14 in (3.5 mm); and 11.9 to 150 Hz, acceleration 2 g Input/output V rms 4000 Vac 3000 Vac Input/ground V rms 3500 Vac 2500 Vac Output/ground V rms 500 Vac Radiation Conducted on the power line No EN Class B and GL levels EN Class B and GL levels Harmonic currents IEC/EN Electrostatic discharge Radiated electromagnetic fields Induced electromagnetic fields Rapid transients Surges Primary outages IEC/EN (6 kv contact/8 kv air) IEC/EN level 3 (10 V/m) IEC/EN level 3 (10 V/m) IEC/EN (4 kv) IEC/EN (2 kv) IEC/EN (voltage dips and interruptions) 29

30 Specifications (continued) ABL8 Universal range Technical specifications Type of power supply ABL8WPS24200 ABL8WPS24400 Certifications CB scheme EN , culus 508, ccsaus, e, RoHS Conformity to standards Safety EN , EN 61204, SELV EMC EN , EN , EN , EN , EN Input circuit LED indication Input values 3 phases (L1-L2-L3) Anti-harmonic filtering Nominal values V Vac Permissible values V Vac Permissible frequencies Hz 47 to 63 Maximum inrush current A 25 for 2 ms max. Power factor Efficiency at nominal load > 92% Dissipated power at nominal load W Yes, via integrated PFC passive filter Operating mode in the event of phase failure V Operation possible for a few minutes then protection trips Output circuit Compatibility with function modules Buffer, battery and battery control unit, and redundancy Diagnostics LEDs on front panel Current (green, orange, and red), voltage (green, red, and off) Relay Closed relay UOut > 21.6 V, contact 230 Vac, 0.5 A max; 24 Vdc, 5 ma min Output voltage (UOut) V 24 Vdc Nominal output values Current A 0 to 20 0 to 40 Power W Permissible temporary inrush current (boost) A 1.5 In for 4 s maximum Output voltage (UOut) V Adjustable 24 to 28.8 Vdc Precision Line and load regulation 1% to 3% Residual ripple - noise mv < 200 (peak-peak) Holding time for I max UIn = 400 Vac ms u 18 u 14 Against short circuits Permanent, automatic or manual restart Against overloads < 1.10 In (after boost function) Protection Against overvoltages V 30 to 32 Vdc Against undervoltages V Tripping if UOut < 21.6 (in manual mode) Thermal Yes Operating and environmental specifications Connections Input Output Diagnostic relay AWG (mm 2 ) AWG (mm 2 ) AWG (mm 2 ) 2212 (3 x 0.5 to 4) screw terminals ground 228 (4 x 0.5 to 10) screw terminals 14 (2 x 2.5) removable screw terminal block Mounting On DIN rail in (mm) 1.38 x 0.30 and 1.38 x 0.59 (35 x 7.5 and 35 x 15) Operating position Vertical Connections Series Possible Parallel Possible Degree of protection IP 20 conforming to IEC Operating temperature F ( C) -13 to 140 derating from 122 F (-25 to 60 derating from 50 C) Environment Storage temperature F ( C) -40 to 158 F (-40 to 70 C) Maximum relative humidity 90% during operation, 95% in storage Vibration per to EN to 11.9 Hz, amplitude 0.14 in (3.5 mm); and 11.9 to150 Hz, acceleration 2 g Protection class according to VDE Class I Dielectric strength 50 Hz for 1 min Input fuse incorporated Emissions according to EN Immunity according to EN and GL Input/output V rms 4000 Vac Input/ground V rms 3500 Vac Output/ground V rms 500 Vac No Radiation EN Class B and GL levels Conducted on the power line EN Class B and GL levels Harmonic currents IEC/EN Electrostatic discharge IEC/EN (6 kv contact/8 kv air) Radiated electromagnetic fields IEC/EN level 3 (10 V/m) Induced electromagnetic fields IEC/EN level 3 (10 V/m) Rapid transients IEC/EN (4 kv) Surges IEC/EN (1 kv) Primary outages IEC/EN (voltage dips and interruptions) 30