Instructions for Use ENA 9 One Touch

Transcription

1 de Instctions for Use NA 9 One Touch The Instctions for Use has be awarded the seal of approval by the indepdt German Technical Inspection Agcy, TÜV SÜD, due to s easy-to-understand style, s thoroughns and coverage of safety aspects.

2 Table of contts Your NA 9 Control elemts 4 Important information 6 Proper use...6 For your safety Preparing and using for the first time 7 JURA on the Internet colour plain text display...7 Setting up the machine...7 Filling the water tank...7 Filling the bean container...7 First-time use...8 Inserting and activating the filter...8 Determining and adjusting the water hardns...9 Adjusting the grinder Preparation 10 Coffee Preparing two specialy coffe at the touch of a button Aroma Boost Latte macchiato, cappuccino Permantly setting the amount of water for the cup size Ground coffee...12 Hot water Daily operation 13 Swching on the machine...13 Daily maintance...13 Swching off the machine Permant settings in programming mode 13 Products...13 nergy-saving mode Automatic swch-off...15 Rins...15 Un for amount of water Language Maintance 16 Rinsing the machine Rinsing the milk system...17 Cleaning the milk system

3 de Table of contts Dismantling and rinsing the dual spout Changing the filter Cleaning the machine Dcaling the machine Dcaling the water tank Cleaning the bean container Display msag 22 7 Troublhooting 23 8 Transport and vironmtally idly disposal 24 Transport / mying the system...24 Disposal Technical data Index JURA contact details / Legal information 27 Symbol dcriion Warnings J WARNING J CAUTION CAUTION Always take note of any information marked wh the words CAUTION or WARNING and a warning sign. The signal word WARNING draws your atttion to pottial serious injury, and the signal word CAUTION to pottial minor injury. CAUTION draws your atttion to pottial damage to the machine. Symbols used T Prom to take action. This symbol means that you are being promed to perform some action. Information and tips to make ev easier to use your Referc to the JURA webse, which provid further information that may be of intert to you: RADY Display 3

4 Control elemts Control elemts 1 Water tank 2 Powder chute for ground coffee 3 Mains cable (back of the machine) 4 Milk pipe 5 Coffee grounds container 6 Drip tray 7 Cup platform 8 Bean container cover 9 l Swch for hot water preparation 10 Hot-water nozzle 11 Height-adjustable dual spout 4

5 de Control elemts 1 Cover 2 c Maintance button 3 / Cappuccino button 4 ( Latte Macchiato button 5 Q On/Off button 6 Grinding wheel 7 ) Aroma Boost button 8 > Coffee button 9 g Rotary Swch 10 Display 5

6 Important information Important information Proper use The machine is digned and intded for private domtic use. It should oy be used for coffee preparation and to heat milk and water. Use for any other purpose will be deemed improper. JURA lektroapparate AG cannot acce any rponsibily for the consequc of improper use. Before using the machine read the instctions for use thoroughly and completely and comply wh the instctions they contain. A warranty service is not applicable for damage or defects caused by non-compliance wh the instctions for use. Keep the instctions for use close to the machine and pass them on to the next user. For your safety Please carefully read and observe the important safety information set out below. To avoid danger of pottially fatal electric shock: U Never use a machine which is damaged or has a defective mains cable. U In the evt of signs of damage, for example if there is a smell of burning, unplug the machine immediately om the mains supply and contact JURA service. U If the mains cable of this machine is damaged, must be repaired eher directly by JURA or by an authorised JURA service ctre. U Make sure that the NA and the mains cable are not located close to hot surfac. U Be careful to sure that the mains cable is not trapped and do not b against sharp edg. U Never op and repair the machine yourself. Do not modify the machine in any way that is not dcribed in the instctions for use. The machine contains live parts. If oped, there is a danger of pottially fatal injury. Repairs may oy be carried out by authorised JURA service ctr, using original spare parts and accsori. A defective machine is not safe and could cause injury or fire. To avoid damage and any associated risk of injury or fire: U Never allow the mains cable to loosely hang down. The mains cable could pose a tripping hazard or become damaged. U Protect the NA om vironmtal influc such as rain, ost and direct suight. U Do not immerse the NA, mains cable or connections in water. U Do not put the NA or any individual parts in the dishwasher. U Swch your NA off before cleaning work wh the On/Off button. Always wipe the NA wh a damp cloth rather than a wet one, and protect om prolonged exposure to water splash. U Oy connect the machine to the mains voltage in accordance wh the information on the rating plate. The rating plate is located on the underside of your NA. Further technical data is provided in the instctions for use (see Chaer 9 Technical data ). U Please oy use original JURA maintance products. Use of products that are not explicly recommded by JURA could damage the NA. U Do not use any coffee beans treated wh addiv or caramelised coffee beans. U Oy fill the water tank wh h, cold water. U Do not fill the bean container wh water. U Swch the machine off wh the On/Off button if you are going to be abst for a longer period of time and remove the mains plug om the power socket. People, including childr, who U do not have the physical, ssory or mtal capabili to use the machine safely or 6

7 de U are inexpericed or lack knowledge in how to use the machine safely must be supervised by a rponsible person wh using, or must be instcted in how to use correctly. Safety wh handling the CLARIS Blue filter cartridge: U Filter cartridg should be ke out of the reach of childr. U Store filter cartridg in a dry place in the sealed packaging. U Protect cartridg om heat and direct suight. U Do not use damaged filter cartridg. Do not op filter cartridg. U 1 Preparing and using for the first time This chaer provid you wh the information you need to use your NA whout any problems. You will prepare your NA step-by-step to joy your first perfect cup of coffee. Setting up the machine 1 Preparing and using for the first time Wh setting up your NA, please note the following: U Place the machine on a horizontal surface that is not ssive to water. U Choose a spot for your NA which protects the machine against overheating. nsure that the vtilation slots are not covered. Filling the water tank To joy the perfect cup of coffee we recommd changing the water every day. CAUTION Milk, sparkling mineral water or other liquids can damage the water tank or the machine. T Oy fill the water tank wh h, cold water. T Remove the water tank and rinse wh cold water. JURA on the Internet Vis us on the On the JURA webse ( you will find interting and up-to-date information on your NA and on every aspect of coffee. 3-colour plain text display Your NA featur a 3-colour plain text display. The colours of the display texts have the following meanings: U Gre: The NA is ready for use. U Red: The NA is proming you to perform some action. Yellow: You are in programming mode. U T Fill the water tank wh h, cold water and reinsert. Filling the bean container CAUTION Coffee beans which have be treated wh addiv (e.g. sugar), preground coffee or eeze-dried coffee will damage the grinder. T Oy use untreated coffee beans to refill the bean container. T Remove the bean container cover. 7

8 1 Preparing and using for the first time T Remove any dirt or foreign objects om inside the bean container. T Fill the bean container wh coffee beans. T Close the bean container. T Place a receacle under the dual spout. First-time use The On/Off button also acts as a power swch. Wh the NA is swched off, the machine do not consume standby ergy. J WARNING If the machine is operated wh a defective mains cable, there is a danger of pottially fatal electric shock. T Never use a machine which is damaged or has a defective mains cable. Precondion: The water tank and bean container are full. T Insert the mains plug into a power socket. Q T Prs the On/Off button to swch the machine on. SPRACH DUTSCH g T Turn the Rotary Swch until the required language is displayed, for example LANGUAG NGLISH. k T Prs the Rotary Swch to confirm the language setting. OK, the language is set. PRSS ROTARY k T Prs the Rotary Swch. SYSTM FILLING HATING PRSS ROTARY k T Prs the Rotary Swch to start the rinse. RINSING, the system rins self, stopping automatically. RADY Inserting and activating the filter Your NA no longer has to be dcaled if you are using the CLARIS Blue filter cartridge. Perform the inserting the filter operation whout any interions. This will sure that your NA always produc s bt. Precondion: RADY is k T Prs and hold the Rotary Swch until RINS appears. g T Turn the Rotary Swch until FILTR - is k T Prs the Rotary Swch to ter the programme em. NO - g T Turn the Rotary Swch until YS p is k T Prs the Rotary Swch to confirm the setting. OK INSRT FILTR T Remove and emy the water tank. T Op the filter holder. 8

9 de T Insert the filter cartridge into the water tank, exerting slight prsure. T Close the filter holder. It will click into place audibly. After two months, the filter will cease to work. You can check the elapsed time by referring to the date plate on the filter holder in the water tank. T Fill the water tank wh h, cold water and reinsert. T Place a receacle (at least 500 ml) under the hot-water nozzle. k T Prs the Rotary Swch. OPN TAP l T Turn the swch anticlockwise to posion m. FILTR RINSING, water flows out of the hot-water nozzle. You can inter rinsing of the filter at any time. To do this, turn the swch clockwise. Turn the swch anticlockwise to continue rinsing the filter. The water may be slightly discoloured. This is not harmful to health and do not affect the taste. Rinsing of the filter stops automatically, CLOS TAP. y T Turn the swch clockwise to posion o. HATING RADY The filter is now activated. 1 Preparing and using for the first time Determining and adjusting the water hardns If you are using the CLARIS Blue filter cartridge and have activated in programming mode, you will not be able to adjust the water hardns. The harder the water is, the more equtly the NA needs to be dcaled. It is therefore important to adjust the water hardns. The water hardns can be adjusted on a continuous scale betwe 1 dh and 30 dh. Determining the water hardns You can find out what the water hardns is by using the Aquadur tt strip supplied as standard. T Hold the tt strip briefly (for one second) under nning water. T Shake off the water. T Wa for about one minute. T You will th be able to read the degree of water hardns om the discolouration of the Aquadur tt strip and the dcriion on the packaging. The water hardns can now be adjusted. Adjusting the water hardns xample: Change the water hardns setting om 16 dh to 25 dh. Precondion: RADY is k T Prs and hold the Rotary Swch until RINS appears. g T Turn the Rotary Swch until HARDNSS is 9

10 2 Preparation k T Prs the Rotary Swch to ter the programme em. 16 dh g T Turn the Rotary Swch until 25 dh is k T Prs the Rotary Swch to confirm the setting. OK, the water hardns is set. HARDNSS g T Turn the Rotary Swch until XIT is k T Prs the Rotary Swch to ex programming mode. RADY Adjusting the grinder You can adjust the grinder on a continuous scale to su the degree of roast of your coffee. CAUTION If you adjust the consistcy of grind wh the grinder is not operating, the grinding wheel could be damaged. T Oy adjust the consistcy of grind wh the grinder is nning. The consistcy of grind setting is correct if the coffee flows regularly om the coffee spout. In addion a fine, thick crema forms. xample: Change the consistcy of grind during the preparation of a coffee. T Place a cup under the dual spout. > T Prs the Coffee button to start preparation. T Turn the grinding wheel to the dired posion while the grinder is nning. 1 COFF, the pret amount of water flows into the cup and preparation stops automatically. RADY 2 Preparation You can inter preparation at any time while a specialy coffee or specialy coffee wh milk is being prepared. Just prs any button. Before and during the grinding operation you can select the coffee strgth for 1 coffee, cappuccino and latte macchiato : MILD, NORMAL, STRONG. During preparation, you can change the pret amount of water by turning the Rotary Swch. You can follow the currt status of preparation on the progrs bar. You can make permant settings for all products in programming mode (see Chaer 4 Permant settings in programming mode Products ). Coffee Precondion: RADY is T Place a cup under the dual spout. > T Prs the Coffee button to start preparation. 1 COFF, the pret amount of water flows into the cup. Preparation stops automatically. RADY 10

11 de Preparing two specialy coffe at the touch of a button The preparation of 2 prsi and 2 coffe follows this same model. xample: Prepare two prsi. Precondion: RADY is T Place two prso cups under the dual spout. ) T Prs the Aroma Boost button twice (whin two seconds) to start preparation. 2 SPRSSI, the pret amount of water flows into the cups. Preparation stops automatically. RADY Aroma Boost Wh you prepare an Aroma Boost the maximum possible amount of powder is hly ground and extracted to make an extra strong prso or coffee. Precondion: RADY is T Place a cup under the dual spout. ) T Prs the Aroma Boost button to start preparation. SPCIAL, the pret amount of water flows into the cup. Preparation stops automatically. RADY Latte macchiato, cappuccino Your NA can prepare a latte macchiato or cappuccino at the touch of a button. There is no need to move the glass or cup. xample: Proceed as follows to prepare one latte macchiato. Precondion: RADY is T Place a glass under the dual spout. T Remove the protective cover of the dual spout. 2 Preparation T Connect the milk pipe to the dual spout. T Immerse the other d of the milk pipe in a receacle wh milk (figure: JURA 0.4 lre stais steel vacuum milk container). nsure that the filling height of the milk is no higher than the milk pipe connection on the dual spout. ( T Prs the Latte Macchiato button. LATT MAC., the milk foam is prepared. Preparation stops automatically wh the pret amount of milk is reached. PAUS There is a short interval while the hot milk separat om the milk foam. This allows the typical layers of a latte macchiato to form. You can choose the lgth of this interval in programming mode (see Chaer 4 Permant settings in programming mode Products ). LATT MAC., coffee preparation starts. The pret amount of water flows into the cup. Preparation stops automatically. RADY Permantly setting the amount of water for the cup size It is easy to make permant settings for the amount of water for all specialy coffe according to the cup size. Adjust the amount once as shown in the following example. very time you prepare a drink in the future, this amount of water will be dispsed. 11

12 2 Preparation xample: Permantly adjust the amount of water for one coffee to the cup size. Precondion: RADY is T Place a cup under the dual spout. > T Prs and hold the Coffee button. 1 COFF, the grinding operation starts. > T Continue to hold the Coffee button down until NOUGH COFF? appears. > T Release the Coffee button. Preparation starts and the coffee flows into the cup. T Prs any button as soon as there is sufficit coffee in the cup. OK, 1 COFF, the set amount of water for one coffee is permantly stored. RADY The preparation of 1 coffee, 2 coffe, 2 prsi, cappuccino and latte macchiato wh ground coffee follows this model. It is not possible to prepare an Aroma Boost wh ground coffee. xample: Prepare a cup of coffee using ground coffee. Precondion: RADY is T Place a cup under the dual spout. T Op the powder chute. FILL POWDR T Place the filler funnel for ground coffee on the powder chute. You can alter this setting at any time by repeating the above procedure. Ground coffee You can choose to use a second coffee variety, for example decaffeinated coffee, wh the powder chute for ground coffee. Never add more than two level measuring spoons of ground coffee. Use ground coffee which is not ground too finely. Very fine coffee can block up the system so that the coffee oy com out in drips. If you did not fill the machine wh a sufficit amount of ground coffee, NOT NOUGH POWDR is displayed and the NA stops the operation. The dired specialy coffee must be prepared whin approximately one minute after filling wh the ground coffee. Otherwise the NA stops the operation and is once more ready for use. T Place one level measuring spoon of ground coffee into the filler funnel. T Remove the filler funnel. T Close the powder chute. SLCT BUTTON > T Prs the Coffee button to start preparation. 1 COFF, the pret amount of water flows into the cup. Preparation stops automatically. RADY It is also possible to prepare two cups of ground coffee. To do this, place two cups under the dual spout and add two level measuring spoons of ground coffee into the filler funnel. Prs the Coffee button > twice (whin two seconds) to start preparation. 12

13 de Hot water J CAUTION There is a danger of scalding om hot water splash. T Avoid direct contact wh the skin. Precondion: RADY is T Place a cup under the hot-water nozzle. l T Turn the swch anticlockwise to posion m. WATR, hot water flows into the cup. y T Turn the swch clockwise wh there is sufficit water in the cup. RADY 3 Daily operation Swching on the machine Wh the NA is swched on, a prom to perform a rinse operation automatically appears. Q T Prs the On/Off button to swch the NA on. HATING PRSS ROTARY T Place a receacle under the dual spout. k T Prs the Rotary Swch to start the rinse. RINSING, the system rins self, stopping automatically. RADY Daily maintance To sure that you get many years of reliable service out of your NA and to guarantee the oimum coffee qualy, the machine requir daily maintance. T Remove the drip tray. T my the coffee grounds container and drip tray and rinse wh warm water. T Reinsert the coffee grounds container and the drip tray. T Rinse the water tank wh clean water. 3 Daily operation T Dismantle and rinse the dual spout (see Chaer 5 Maintance Dismantling and rinsing the dual spout ). T Wipe the surface of the machine wh a clean, soft, damp cloth (e.g. microfibre cloth). Swching off the machine Wh the NA is swched off, the system is automatically rinsed if a specialy coffee has be prepared. If cappuccino or latte macchiato has be prepared, the cappuccino rinse also tak place. T Place a receacle under the dual spout. Q T Prs the On/Off button. RINSING, CAPPUCCINO RINSING, the system rins self, stopping automatically. The NA is swched off. Wh the NA is swched off wh the On/ Off button, the machine do not consume standby ergy. 4 Permant settings in programming mode Products You can make the following permant settings for the specialy coffe: U Amount of water: 25 ML 240 ML (per cup) U Coffee strgth (for 1 coffee): MILD, NORMAL, STRONG Temperature: NORMAL, HIGH U You can make the following permant settings for latte macchiato and cappuccino: U Amount of milk foam: 3 SC 120 SC Interval: 0 SC 60 SC U 13

14 4 Permant settings in programming mode U U U Coffee strgth: MILD, NORMAL, STRONG Amount of water: 25 ML 240 ML Temperature: NORMAL, HIGH Permant settings in programming mode always follow the same model. xample: Permantly change the coffee strgth (FLAVOUR) for 1 coffee om NORMAL to STRONG. Precondion: RADY is k T Prs and hold the Rotary Swch until RINS appears. g T Turn the Rotary Swch until PRODUCT is k T Prs the Rotary Swch to ter the programme em. SLCT BUTTON Next select the button of the product for which you would like to make settings. No product is prepared at this point. To change the setting for a double product, prs the corrponding button twice whin two seconds. > T Prs the Coffee button. 1 COFF WATR g T Turn the Rotary Swch until FLAVOUR is k T Prs the Rotary Swch to ter the programme em. NORMAL g T Turn the Rotary Swch until STRONG is k T Prs the Rotary Swch to confirm the setting. OK, the coffee strgth is set. FLAVOUR g T Turn the Rotary Swch until XIT is k T Prs the Rotary Swch to ex the programme em. PRODUCT g T Turn the Rotary Swch until XIT is k T Prs the Rotary Swch to ex programming mode. RADY nergy-saving mode The NA can be permantly set to an ergy-saving mode (nergy Save Mode,.S.M. ): U NRGY - U The NA is constantly ready for use. U All specialy coffe as well as hot water can be prepared whout having to wa. U NRGY p U Soon after the last preparation, the NA stops heating up. As soon as the ergy-saving temperature is reached, this is indicated in the display by the msage NRGY ON this may last several minut. The machine must heat back up before the next preparation. U Before coffee and hot water preparation, the machine heats up. xample: Change the ergy-saving mode om NRGY - to NRGY p. Precondion: RADY is k T Prs and hold the Rotary Swch until RINS appears. g T Turn the Rotary Swch until NRGY - is k T Prs the Rotary Swch to ter the programme em. CONOMY - g T Turn the Rotary Swch until CONOMY p is 14

15 de k T Prs the Rotary Swch to confirm the setting. OK, the ergy-saving mode is set. NRGY p g T Turn the Rotary Swch until XIT is k T Prs the Rotary Swch to ex programming mode. RADY Automatic swch-off By instcting your NA to automatically swch self off, you can cut down your ergy consumion. If this function is activated, your NA swch off automatically after the pret time following the last action on the machine. The automatic swch-off can be set to betwe 15 minut and 9 hours. xample: Change the automatic swch-off time om 2 HRS to 1 HRS. Precondion: RADY is k T Prs and hold the Rotary Swch until RINS appears. g T Turn the Rotary Swch until OFF AFTR is k T Prs the Rotary Swch to ter the programme em. 2 HRS g T Turn the Rotary Swch until 1 HRS is k T Prs the Rotary Swch to confirm the setting. OK, the automatic swch-off time is set. OFF AFTR g T Turn the Rotary Swch until XIT is k T Prs the Rotary Swch to ex programming mode. RADY Rins 4 Permant settings in programming mode In the programme em RINSS you can make the following settings: U INIT RINS MANUAL U The swch-on rinse must be started manually. U INIT RINS AUTOMATIC U The swch-on rinse is started automatically. U C-RINS AFTR 10' U You are promed to perform a cappuccino rinse 10 minut after preparation of a U specialy coffee wh milk. C-RINS NOW U You are promed to perform a cappuccino rinse immediately after preparation of a specialy coffee wh milk. xample: Change the setting such that the cappuccino rinse is performed immediately after preparation of a specialy coffee wh milk. Precondion: RADY is k T Prs and hold the Rotary Swch until RINS appears. g T Turn the Rotary Swch until RINSS is k T Prs the Rotary Swch to ter the programme em. INIT RINS g T Turn the Rotary Swch until C-RINS is k T Prs the Rotary Swch to ter the programme em. AFTR 10' g T Turn the Rotary Swch until NOW is k T Prs the Rotary Swch to confirm the setting. OK C-RINS g T Turn the Rotary Swch until XIT is 15

16 5 Maintance T Prs the Rotary Swch to ex the programme em. RINSS g T Turn the Rotary Swch until XIT is k T Prs the Rotary Swch to ex programming mode. RADY Un for amount of water You can change the un for the amount of water om ml to oz. xample: Change the un for the amount of water om ML to OZ. Precondion: RADY is k T Prs and hold the Rotary Swch until RINS appears. g T Turn the Rotary Swch until DISPLAY is k T Prs the Rotary Swch to ter the programme em. ML g T Turn the Rotary Swch until OZ is k T Prs the Rotary Swch to confirm the setting. OK, the un for the amount of water is set. DISPLAY g T Turn the Rotary Swch until XIT is k T Prs the Rotary Swch to ex programming mode. RADY Language In this programme em you can set the language used by your NA. xample: Change the language om NGLISH to DUTSCH. Precondion: RADY is k T Prs and hold the Rotary Swch until RINS appears. g T Turn the Rotary Swch until LANGUAG is k T Prs the Rotary Swch to ter the programme em. NGLISH g T Turn the Rotary Swch until DUTSCH is k T Prs the Rotary Swch to confirm the setting. OK, the language is set. SPRACH g T Turn the Rotary Swch until XIT is k T Prs the Rotary Swch to ex programming mode. BRIT 5 Maintance Your NA has the following integrated maintance programm: U Cappuccino other cleaning (C-CLAN) U Rinsing the machine (RINS) U Cappuccino rinse (C-RINS) U Cleaning the machine (CLAN) U Changing the filter (FILTR) Dcaling the machine (D-SCAL) U Rinsing the machine You can iniate the rinse operation manually at any time. Precondion: RADY is T Place a receacle under the dual spout. k T Prs and hold the Rotary Swch until RINS appears. k T Prs the Rotary Swch to ter the programme em. C-CLAN g T Turn the Rotary Swch until RINS is 16

17 de k T Prs the Rotary Swch to iniate the rinse operation. RINSING, the system rins self, stopping automatically. RADY Rinsing the milk system After each milk preparation, the NA proms you to perform a cappuccino rinse. Precondion: CAPPUCCINO RINS is T Place a receacle under the dual spout. 5 Maintance JURA Cappuccino Cleaner is available om stockists. k T Prs and hold the Rotary Swch until RINS appears. k T Prs the Rotary Swch to ter the programme em. C-CLAN k T Prs the Rotary Swch to start cappuccino other cleaning. CLANR FOR CAPPU. T Remove the milk pipe om the receacle wh milk. T Pour 250 ml of h water into a receacle and add one capful (max. 15 ml) of Cappuccino Cleaner. T Immerse the milk pipe in the receacle. T Place another receacle under the dual spout. k T Prs the Rotary Swch to start the cappuccino rinse. CAPPUCCINO RINSING, the milk system is rinsed. The rinse stops automatically and RADY appears on the display. Cleaning the milk system The dual spout should be cleaned daily if milk has be prepared to make sure functions perfectly. Your NA will not prom you to clean the dual spout. CAUTION If the wrong cleaning agt is used, the machine could be damaged and/or trac could be left behind in the milk. T Use oy original JURA maintance products. k T Prs the Rotary Swch. CLANING, the milk system and the pipe are cleaned. The operation is intered, WATR FOR CAPPUCCINO. T Rinse the receacle thoroughly, fill wh 250 ml of h water and immerse the milk pipe in. T my the receacle under the dual spout and place back underneath. k T Prs the Rotary Swch. CLANING, the milk system and the pipe are rinsed wh h water. The operation stops automatically. RADY 17

18 5 Maintance Dismantling and rinsing the dual spout The dual spout should be dismantled and rinsed daily if milk has be prepared to make sure functions perfectly. Your NA will not prom you to clean the dual spout. T Remove the milk pipe and rinse thoroughly under nning water. T Prs the releasing devic and pull the dual spout down and off. T F the air intake pipe. T Reassemble the milk system, noting the numbering on the parts. T Push the milk system down and remove. T Insert the assembled individual parts into the dual spout and prs them together. T F the dual spout on the machine. It will click into place audibly. T Dismantle the milk system into s individual parts. Changing the filter T Rinse all parts under nning water. If there are severely dried on milk ridu, firstly immerse the individual parts in JURA Cappuccino Cleaner and th clean them thoroughly. After 50 lr of water have flowed through, the filter will cease to work. Your NA will automatically prom you to change the filter. After two months, the filter will cease to work. You can check the elapsed time by referring to the date plate on the filter holder in the water tank. 18

19 de If the CLARIS Blue filter cartridge is not activated in programming mode, you will not be promed to change the filter. Precondion: FILTR / RADY is T Op the cover behind the Rotary Swch. c T Prs the Maintance button. INSRT FILTR T Remove and emy the water tank. T Op the filter holder and remove the old filter cartridge. T Insert a new filter cartridge into the water tank, exerting slight prsure. T Close the filter holder. It will click into place audibly. T Fill the water tank wh h, cold water and reinsert. T Place a receacle (at least 500 ml) under the hot-water nozzle. k T Prs the Rotary Swch. OPN TAP l T Turn the swch anticlockwise to posion m. FILTR RINSING, water flows out of the hot-water nozzle. You can inter rinsing of the filter at any time. To do this, turn the swch clockwise. Turn the swch anticlockwise to continue rinsing the filter. The water may be slightly discoloured. This is not harmful to health and do not affect the taste. 5 Maintance Rinsing of the filter stops automatically, CLOS TAP. y T Turn the swch clockwise to posion o. HATING RADY Cleaning the machine After 180 preparations or 80 swch-on rins, the NA will prom you to clean. CAUTION If the wrong cleaning agt is used, the machine could be damaged and/or trac could be left behind in the water. T Use oy original JURA maintance products. The cleaning programme lasts approximately 15 minut. Do not inter the cleaning programme. The qualy of cleaning will be impaired if you do so. JURA cleaning tablets are available om stockists. Precondion: CLAN / RADY is T Op the cover behind the Rotary Swch. c T Prs the Maintance button. MPTY TRAY T my the drip tray and coffee grounds container and reinsert them. PRSS ROTARY T Place a receacle under the dual spout. k T Prs the Rotary Swch to start cleaning. CLANING, water flows out of the dual spout. The operation is intered, ADD TABLT. 19

20 5 Maintance T Op the powder chute for ground coffee and drop in a JURA cleaning tablet. T Close the powder chute for ground coffee. PRSS ROTARY k T Prs the Rotary Swch. CLANING, water flows out of the dual spout repeatedly. MPTY TRAY T my the drip tray and coffee grounds container and reinsert them. HATING RADY Dcaling the machine The NA builds up deposs of limcale over time and automatically proms you to dcale wh necsary. The degree of calcification depds on the hardns of your water. J CAUTION If the dcaling agt com into contact wh the skin or ey, this can cause irration. T Avoid contact wh the skin or ey. T Rinse off dcaling agt wh clean water. Should you get any dcaling agt in your eye, see a doctor. CAUTION If the wrong dcaling agt is used, the machine could be damaged and/or trac could be left behind in the water. T Use oy original JURA maintance products. CAUTION If the dcaling operation is intered, there may be damage to the machine. T Allow the dcaling programme to n to the d. CAUTION If the dcaling agt com into contact wh ssive surfac (e.g. marble), damage cannot be led out. T Clean up any splash immediately. The dcaling programme lasts approximately 40 minut. JURA dcaling tablets are available om stockists. If you use a CLARIS Blue filter cartridge and this is activated, you will not be promed to dcale. Precondion: D-SCAL / RADY is T Op the cover behind the Rotary Swch. c T Prs the Maintance button. MPTY TRAY T my the drip tray and coffee grounds container and reinsert them. AGNT IN TANK T Remove and emy the water tank. T Completely dissolve the contts of one blister (three JURA dcaling tablets) in a receacle holding 500 ml of water. This may take several minut. T Pour the solution into the emy water tank and reinsert the tank. OPN TAP 20

21 de T Place one receacle each under the hot-water nozzle and the dual spout. l T Turn the swch anticlockwise to posion m. D-SCALING, water flows out of the hot-water nozzle repeatedly. CLOS TAP y T Turn the swch clockwise to posion o. D-SCALING, the dcaling operation is continued. Water flows out of the dual spout repeatedly. MPTY TRAY T my the drip tray and coffee grounds container and reinsert them. FILL WATR TANK T my both receacl and place them back under the hot-water nozzle and the dual spout. T Remove the water tank, rinse thoroughly, fill wh h, cold water and reinsert. OPN TAP l T Turn the swch anticlockwise to posion m. D-SCALING, water flows out of the hot-water nozzle. The operation is intered, CLOS TAP. y T Turn the swch clockwise to posion o. D-SCALING, the dcaling operation is continued. Water flows out of the dual spout repeatedly. MPTY TRAY T my the drip tray and coffee grounds container and reinsert them. RADY If the dcaling operation stops unexpectedly, rinse the water tank thoroughly. Dcaling the water tank 5 Maintance Limcale deposs may form in the water tank. To sure correct function of the machine, dcale the water tank om time to time. T Remove the water tank. T If you use a CLARIS Blue filter cartridge, remove. T Dcale the tank wh a mild convtional dcaling agt in accordance wh the manufacturer's instctions. T Rinse the water tank thoroughly. T If you use a CLARIS Blue filter cartridge, reinsert. T Fill the water tank wh h, cold water and reinsert. Cleaning the bean container Coffee beans may be covered wh a slight oil film which remains on the walls of the bean container. The trac may negatively affect the coffee rult. For this reason clean the bean container om time to time. Q T Prs the On/Off button to swch the machine off. T Disconnect the mains plug. T Remove the bean container cover. T Remove the coffee beans wh a vacuum cleaner. T Clean the bean container wh a soft, dry cloth. T Fill the bean container wh h coffee beans, th close the bean container cover. 21

22 6 Display msag 6 Display msag Msage Cause/Rult Action FILL WATR TANK The water tank is emy or not correctly inserted. You cannot prepare any products. T Fill the water tank (see Chaer 1 Preparing and using for the first time Filling the water tank ). T Insert the water tank. MPTY GROUNDS TRAY MISSING FILL BANS PRSS ROTARY CAPPUCCINO RINS RADY / CLAN RADY / D-SCAL RADY / FILTR NOT NOUGH POWDR TOO HOT 22 The coffee grounds container is full. No specialy coffe can be prepared, but hot water preparation is possible. The drip tray is not inserted correctly or is not inserted at all. You cannot prepare any products. The bean container is emy. No specialy coffe can be prepared, but hot water preparation is possible. The NA is proming you to perform a rinse or continue a maintance programme that was already started. The NA requts a cappuccino rinse. The NA is proming you to clean. The NA is proming you to dcale. After 50 lr of water have flowed through the CLARIS Blue filter cartridge, will cease to work. There is insufficit ground coffee in the machine; the NA stops the operation. The system is too hot to start a maintance programme. T my the coffee grounds container and the drip tray (see Chaer 3 Daily operation Daily maintance ). T Insert the drip tray. T Fill the bean container (see Chaer 1 Preparing and using for the first time Filling the bean container ). T Prs the Rotary Swch to start the rinse or to continue the maintance programme. T Prs the Rotary Swch to start the cappuccino rinse. T Perform cleaning (see Chaer 5 Maintance Cleaning the machine ). T Perform dcaling (see Chaer 5 Maintance Dcaling the machine ). T Replace the CLARIS Blue filter cartridge (see Chaer 5 Maintance Changing the filter ). T The next time you prepare a beverage, add more ground coffee (see Chaer 2 Preparation Ground coffee ). T Wa for several minut until the system has cooled or prepare a specialy coffee or hot water.

23 de 7 Troublhooting 7 Troublhooting Problem Cause/Rult Action Insufficit foam is produced wh the milk is othed or milk sprays om the dual spout. Coffee oy com out in drips wh is being prepared. Water hardns cannot be adjusted. FILL WATR TANK is displayed although the water tank is full. Grinder is making a very loud noise. RROR 2 is Other RROR msag are The dual spout is dirty. T Clean the dual spout (see Chaer 5 Maintance Cleaning the milk system ). T Dismantle and rinse the dual spout (see Chaer 5 Maintance Dismantling and rinsing the dual spout ). Coffee or ground coffee has be ground too finely and is blocking the system. The CLARIS Blue filter cartridge is activated. The water tank float is trapped. There are foreign objects in the grinder. If the machine was exposed to the cold for a long period of time, heating is disabled for safety reasons. T Set the grinder to a coarser setting or use coarser ground coffee (see Chaer 1 Preparing and using for the first time Adjusting the grinder ). T Deactivate the CLARIS Blue filter cartridge in programming mode. T Dcale the water tank (see Chaer 5 Maintance Dcaling the water tank ). Contact customer support in your country (see Chaer 11 JURA contact details / Legal information ). T Warm the machine at room temperature. T Swch off the NA wh the On/Off button. Contact customer support in your country (see Chaer 11 JURA contact details / Legal information ). If you were unable to solve the problem, contact customer support in your country (see Chaer 11 JURA contact details / Legal information ). 23

24 8 Transport and vironmtally idly disposal 8 Transport and vironmtally idly disposal Transport / mying the system Keep the packaging for your NA. It should be used to protect the machine during transport. In order to protect the NA om ost during transport, the system must be emied. Precondion: RADY is T Place a receacle under the hot-water nozzle. l T Turn the swch anticlockwise to posion m. WATR, hot water flows out of the hot-water nozzle. T Remove and emy the water tank. Hot water will continue to flow until the system is emy. CLOS TAP y T Turn the swch clockwise to posion o. FILL WATR TANK Q T Prs the On/Off button to swch the machine off. The next time you use the machine the system must be refilled (see Chaer 1 Preparing and using for the first time First-time use ). 9 Technical data Voltage V ~, 50 Hz Power 1450 W Conformy mark A S nergy consumion Approx. 12 Wh CONOMY - nergy consumion CONOMY p Pump prsure Holding capacy of water tank (whout filter) Holding capacy of bean container Holding capacy of coffee grounds container Cable lgth Weight Dimsions (W H D) Approx. 3.5 Wh Static, max. 15 bar 1.1 l 125 g Approx. 10 servings Approx. 1.1 m Approx. 9.4 kg cm Disposal Please dispose of old machin in an vironmtally neutral way. H Old machin contain valuable, recyclable materials which should be recycled. Please therefore dispose of old machin via suable collection systems. 24

25 de 10 Index 10 Index A B C Addrs 27 Aroma Boost 11 Automatic swch-off 15 Bean container Cleaning 21 Filling 7 Bus bar Technical data 24 Button Aroma Boost 5 Cappuccino button 5 Coffee button 5 Latte Macchiato button 5 Maintance button 5 On/Off button 5 Cappuccino 11 Cappuccino other cleaning Cleaning the milk system 17 Cappuccino rinse Rinsing the milk system 17 CLARIS Blue filter cartridge Changing 18 Inserting and activating the filter 8 Cleaning Bean container 21 Machine 19 Coffee 10 Coffee grounds container 4 Consistcy of grind Adjusting the grinder 10 Grinding wheel 5 Contact details 27 Cover 5 Bean container 4 Cup platform 4 Customer support 27 D Degree of water hardns 9 Dcaling Machine 20 Water tank 21 Determining and adjusting the water hardns 9 Display 5, 7 Display msag 22 Drip tray 4 Dual spout 4 Dismantling and cleaning 18 F G mying the system 24 nergy-saving mode 14 rrors Troublhooting 23 Filling Bean container 7 Water tank 7 Filter Changing 18 Inserting and activating the filter 8 First-time use 8 Ground coffee 12 H Hotline 27 Hot water 13 Hot-water nozzle 4 Hot water preparation Swch for hot water preparation 4 I Instant coffee Ground coffee 12 Internet 7 25

26 10 Index J L JURA Contact details 27 Internet 7 Language 16 Latte macchiato 11 M Machine Cleaning 19 Dcaling 20 Rinsing 16 Setting up 7 Swching off 13 Swching on 13 Mains cable 4 Maintance Daily maintance 13 Maintance 16 Msag, display 22 P Permantly setting the water for the cup size 11 Permant settings in programming mode 13 Powder chute 4 Powder chute for ground coffee 4 Preparation 10, 11 Aroma Boost 11 Cappuccino 11 Coffee 10 Ground coffee 12 Latte macchiato 11 Problems Troublhooting 23 Programming mode 13 Automatic swch-off 15 nergy-saving mode 14 Language 16 Products 13 Rins 15 Un for amount of water 16 Proper use 6 R S T Rins 15 Rinsing Machine 16 Rotary Swch 5 Safety 6 Safety information 6 Settings Permant settings in programming mode 13 Setting up Setting up the machine 7 Swch for hot water preparation 4 Swching off 13 Swching on 13 Swch-off Automatic swch-off 15 Symbol dcriion 3 Technical data 24 Tel 27 Troublhooting 23 U Un for amount of water 16 Use, First-time 8 W Water tank Dcaling 21 Filling 7 Webse 7 26

27 Art /NA 9// de 11 JURA contact details / Legal information 11 JURA contact details / Legal info rmatio n JURA lektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchs Tel You will find addional contact details for your country at Directiv The machine compli wh the following directiv: U 2006/95/C Low Voltage Directive U 2004/108/C lectromagnetic Compatibily U 2009/125/C codign Technical chang We rerve the right to make technical chang. The diagrams used in the instctions for use are for illustration purpos oy and do not reprt the original colours of the machine. Some details of your NA may vary. Feedback Your opinion is important to us! Use the contact link at Copyright The instctions for use contain information which is protected by copyright. It is not permted to photocopy the instctions for use or translate them into another language whout the prior wrt const of JURA lektroapparate AG. 27