Multimedia : Cartilage Podcast, Dean, et al. J. Biomech ,
|
|
- Tracy Job Atkinson
- 7 years ago
- Views:
Transcription
1 3.05 Nanomechanics of Materials and Biomaterials Tuesday 04/10/07 Prof. C. Orti, MIT-DMSE I LECTURE 15: THE ELECTRICAL DOUBLE LAYER (EDL) Outline : THE ELECTRICAL DOUBLE LAYER IN BOUNDARY LUBRICATION PODCAST... REVIEW LECTURE #14 : THE ELECTRICAL DOUBLE LAYER (EDL) THE ELECTRICAL DOUBLE LAYER Solution to 1D Linearied P-B Equation For a 1:1 Monovalent Electrolyte... 4 Electrical Potential Profile for Two Interacting EDLs... 5 EDL Force Calculation (1)...6 EDL Force Calculation ()...7 Objectives: To understand the mathematical formulation for the repulsive EDL Interaction between two charged surfaces Readings: Course Reader Documents 4 and 5 Multimedia : Cartilage Podcast, Dean, et al. J. Biomech , Acknowledgement : These lecture notes were prepared with the assistance of Prof. Delphine Dean (Clemson University) 1
2 3.05 Nanomechanics of Materials and Biomaterials Tuesday 04/10/07 Prof. C. Orti, MIT-DMSE THE ELECTRICAL DOUBLE LAYER (EDL) IN BOUNDARY LUBRICATION PODCAST Courtesy of Jacob Klein. Used with permission. Source: Briscoe, W. H., et al. "Boundary Lubrication Under Water." Nature 444 (November 9, 006):
3 3.05 Nanomechanics of Materials and Biomaterials Tuesday 04/10/07 Prof. C. Orti, MIT-DMSE REVIEW LECTURE #14 : THE ELECTRICAL DOUBLE LAYER (EDL) 1 Applications, Origins of Surface Charge, Definitions : EDL, Stern layer balance between attractive ionic forces (electrical migration force) driving counterions to surface and entropy/diffusion/osmotic down the concentration gradient κd General Mathematical Form : W(D) ELECTROSTATIC = CESe C ES = electrostatic prefactor analogous to the Hamaker constant for VDW interactions κ -1 = Electrical Debye Length (characteristic decay length of the interaction)- will be defined more rigorously today Poisson-Boltmann (P-B) Formulation : ions are point charges (don't take up any volume, continuum approximation), they do not interact with each other, uniform dielectric; permittivity independent of electrical field, electroquasistatics (time varying magnetic fields are negligibly small) Stern or Helmholt layer Diffuse Layer Derived 1D P-B Equation for a 1:1 monovalent electrolyte (e.g. Na, Cl - ) ψ d Fc ε d () o Fψ() = sinh RT D 1 electrolyte (aqueous solution containing free ions) bulk ionic strength/ salt concentration D 1 >D negatively charged surface solvated coion solvated counterion bound ion ψ ( )= electrical potential R=Universal Gas Constant = J/mole K T= Temperature (K) F= Faraday Constant (96,500 Coulombs/mole electronic charge) c o (moles/cm 3 or mole/l=[m], 1 ml=1 cm 3 )=electrolyte ionic strength (IS) = bulk salt concentration, ideally for, but practically just far enough away from surface charge region, several Debye lengths away ε (C J -1 m -1 )=permittivity 3
4 3.05 Nanomechanics of Materials and Biomaterials Tuesday 04/10/07 Prof. C. Orti, MIT-DMSE SOLUTION TO 1D LINEARIZED P-B EQUATION FOR A 1:1 MONOVALENT ELECTROLYTE - For Na, Cl (monovalent 1:1 electrolyte solution) d ψ () Fco Fψ() = sinh d ε RT nd order nonlinear differential eq. solve numerically Fψ() Linearie when << 1 or ψ <~ 60 mv RT "Debye -Huckel Approximatio n" - Linearied P -B Equation d ψ () Fcψ() o = κ ψ() (*) linear differential equation d ε RT where : κ 1 = εrt F co κ Solution to (*): ψ( ) = ψ(0) e K ψ ( ) = electrical potential, K = integration constant - Boundary Conditions (1 Layer or D > 5 κ 1 ); ψ ( = ) = 0, K = 0 1) Constant Surface Potential ψ (0) = ψ = ψ = surface potential ( = 0) = constant κ -1 o s (nm) = Debye Length = the distance over which the potential decays to (1/ e) of its value at = 0, depends solely on the properties of the solution and not on the surface charge or potential -rule of thumb : range of the electrostatic interaction ~ 5 κ -1 σ ψ ο =ψ s ψ ο /e =0 POTENTIAL PROFILE Ψ() c 1 c c 3 1/κ 1 1/κ 1/κ 3 c 3 <c <c 1 "salt screening" IS [M] k -1 (nm) 10-7 (pure water) 950 [H ]=[OH - ] [NaCl] [NaCl] [NaCl] * [NaCl] [NaCl] 0.3 (not physical!) *physiological conditions 4
5 3.05 Nanomechanics of Materials and Biomaterials Tuesday 04/10/07 Prof. C. Orti, MIT-DMSE ELECTRICAL POTENTIAL PROFILE FOR TWO INTERACTING EDLs dψ ) Constant Surface Charge d = 3 σ = surface charge density (C/m ), ρ = volume charge density of entire electrolyte phase (C/m ) comes from electroneutrality : =0 σ ε d ψ dψ σ = ρd = - ε d = ε d d 0 0 Poisson's Law = ψ εκ dψ Boundary Conditions for Two Interacting Plane Parallel Laye rs : = 0, ψ = ψm for = D/ d Surface potential constant with D Surface potential changes with D (dψ/dx at surface changes with D) Φ 0 Φ ψ o ψ o =0 o ψ() Φ(x) (mv) Constant potential solution as planes are approached together Constant Charge solution when planes are approached
6 3.05 Nanomechanics of Materials and Biomaterials Tuesday 04/10/07 Prof. C. Orti, MIT-DMSE EDL : FORCE CALCULATION (1) -So now that we can solve the P-B equation and get ψ() and ρ() in space, how do we calculate a force? -We can calculate a pressure (P = force per unit area) on these infinite charged surfaces if we know the potential. Using a control box, the pressure on the surface at x = D is the pressure calculated at any point between the surfaces relative to a ground state: P( = ) - P( ) j σ ψ(x) ( ) = j ψ m = -D/ =0 = D/ control box Reference position in the bulk where: ψ() = 0 E = dψ/d = 0 c i () = c io ( ) Now at any point the pressure is going to be the sum of two terms: P( = j ) - P( ) = "electrical" "osmotic" The electrical contribution (a.k.a. Maxwell stress) is due to the electric field: ε P(= j )-P( )= (E (= i )-E ( )) "osmotic" The osmotic contribution is due to the ion concentrations (van't Hoff's Law, chemical equation of state): ε P( = j ) - P( ) = (E ( = i ) - E ( )) RT (c i( = i ) - c i( )) all ions Now some things simplify because at, E 0 and c i ( ) c io 6
7 3.05 Nanomechanics of Materials and Biomaterials Tuesday 04/10/07 Prof. C. Orti, MIT-DMSE EDL : FORCE CALCULATION (-CONT'D) -If we can simplify things if we pick j to be the point between the surfaces where E = 0 (i.e. if the surface charges are the same then this is the mid point between the two surfaces, = 0), only have an osmotic component: P( = 0) - P( ) = RT (c (0) - c ) i io all ions Note: we can pick any point j because the sum of the osmotic and electrical terms is a constant. We chose = 0 because it s less messy since we don t have to calculate E. If it s a monovalent salt solution we can plug in the formula for the concentration for Boltmann Statistics: Fψm Fψm - Fψ RT RT m P =RT ce 0 ce 0 -RTc o =RTc0 cosh -1 RT where : ψ m is the potential at =0 and P is the net force/area on the surface. If ψ m << RT/F ~60mV, then we can actually solve this equation further: Fψ m c0f ψm P RTC 0 (1- )-1 = = εκ ψ m RT RT and we can solve for ψ m if we wanted using the linearied PB equation (it s a little messy). If you plug in the value for ψ m you get: -κd P 4εκ ψ ο e (constant surface potential) 4σ -κd P e (constant surface charge) ε Exponential in this case so you can think of the Debye length, κ -1, as being the length scale over which electrostatic forces occur. 7
8 3.05 Nanomechanics of Materials and Biomaterials Tuesday 04/10/07 Prof. C. Orti, MIT-DMSE APPENDIX : MATHEMATICAL POTENTIALS FOR ELECTRICAL DOUBLE LAYER FOR DIFFERENT GEOMETRIES (From Leckband, Israelachvili, Quarterly Reviews of Biophysics, 34,, 001) Image removed due to copyright restrictions. Table in Leckband and Israelachvili, Quarterly Reviews of Biophysics, 34,, ( ) ( ψο/107) Z = tanh σ = sinh( ψ /53.4) ο c -1 J m (monovalent electrolyte) - ocm (monovalent electrolyte) 8
Charged interfaces. Formation of charged surfaces. Helmholz, Gouy- Chapman and Stern model of double layer.
Charged interfaces. Formation of charged surfaces. Helmholz, Gouy- Chapman and Stern model of double layer. Charged interfaces In polar solvents, most substances become charged: Preferential adsorption
More informationSoil Chemistry Ch. 2. Chemical Principles As Applied to Soils
Chemical Principles As Applied to Soils I. Chemical units a. Moles and Avogadro s number The numbers of atoms, ions or molecules are important in chemical reactions because the number, rather than mass
More informationSheet Resistance = R (L/W) = R N ------------------ L
Sheet Resistance Rewrite the resistance equation to separate (L / W), the length-to-width ratio... which is the number of squares N from R, the sheet resistance = (σ n t) - R L = -----------------------
More informationBasic Equations, Boundary Conditions and Dimensionless Parameters
Chapter 2 Basic Equations, Boundary Conditions and Dimensionless Parameters In the foregoing chapter, many basic concepts related to the present investigation and the associated literature survey were
More informationCHAPTER 24 GAUSS S LAW
CHAPTER 4 GAUSS S LAW 4. The net charge shown in Fig. 4-40 is Q. Identify each of the charges A, B, C shown. A B C FIGURE 4-40 4. From the direction of the lines of force (away from positive and toward
More informationElectromagnetism - Lecture 2. Electric Fields
Electromagnetism - Lecture 2 Electric Fields Review of Vector Calculus Differential form of Gauss s Law Poisson s and Laplace s Equations Solutions of Poisson s Equation Methods of Calculating Electric
More informationUniversitätsstrasse 1, D-40225 Düsseldorf, Germany 3 Current address: Institut für Festkörperforschung,
Lane formation in oppositely charged colloidal mixtures - supplementary information Teun Vissers 1, Adam Wysocki 2,3, Martin Rex 2, Hartmut Löwen 2, C. Patrick Royall 1,4, Arnout Imhof 1, and Alfons van
More informationChapter 1. Introduction of Electrochemical Concepts
Chapter 1. Introduction of Electrochemical Concepts Electrochemistry concerned with the interrelation of electrical and chemical effects. Reactions involving the reactant the electron. Chemical changes
More informationElectric Fields in Dielectrics
Electric Fields in Dielectrics Any kind of matter is full of positive and negative electric charges. In a dielectric, these charges cannot move separately from each other through any macroscopic distance,
More informationOverview of DLVO Theory
Overview of DLVO Theory Gregor Trefalt and Michal Borkovec Email. gregor.trefalt@unige.ch, michal.borkovec@unige.ch September 29, 214 Direct link www.colloid.ch/dlvo Derjaguin, Landau, Vervey, and Overbeek
More informationChapter 18. Electric Forces and Electric Fields
My lecture slides may be found on my website at http://www.physics.ohio-state.edu/~humanic/ ------------------------------------------------------------------- Chapter 18 Electric Forces and Electric Fields
More informationChapter 7: Polarization
Chapter 7: Polarization Joaquín Bernal Méndez Group 4 1 Index Introduction Polarization Vector The Electric Displacement Vector Constitutive Laws: Linear Dielectrics Energy in Dielectric Systems Forces
More informationCAE -Finite Element Method
16.810 Engineering Design and Rapid Prototyping Lecture 3b CAE -Finite Element Method Instructor(s) Prof. Olivier de Weck January 16, 2007 Numerical Methods Finite Element Method Boundary Element Method
More informationarxiv:1111.4354v2 [physics.acc-ph] 27 Oct 2014
Theory of Electromagnetic Fields Andrzej Wolski University of Liverpool, and the Cockcroft Institute, UK arxiv:1111.4354v2 [physics.acc-ph] 27 Oct 2014 Abstract We discuss the theory of electromagnetic
More informationDifferential Relations for Fluid Flow. Acceleration field of a fluid. The differential equation of mass conservation
Differential Relations for Fluid Flow In this approach, we apply our four basic conservation laws to an infinitesimally small control volume. The differential approach provides point by point details of
More informationLecture 5. Electric Flux and Flux Density, Gauss Law in Integral Form
Lecture 5 Electric Flux and Flux ensity, Gauss Law in Integral Form ections: 3.1, 3., 3.3 Homework: ee homework file LECTURE 5 slide 1 Faraday s Experiment (1837), Flux charge transfer from inner to outer
More informationChemistry 51 Chapter 8 TYPES OF SOLUTIONS. A solution is a homogeneous mixture of two substances: a solute and a solvent.
TYPES OF SOLUTIONS A solution is a homogeneous mixture of two substances: a solute and a solvent. Solute: substance being dissolved; present in lesser amount. Solvent: substance doing the dissolving; present
More informationVector surface area Differentials in an OCS
Calculus and Coordinate systems EE 311 - Lecture 17 1. Calculus and coordinate systems 2. Cartesian system 3. Cylindrical system 4. Spherical system In electromagnetics, we will often need to perform integrals
More informationChapter 17. How are acids different from bases? Acid Physical properties. Base. Explaining the difference in properties of acids and bases
Chapter 17 Acids and Bases How are acids different from bases? Acid Physical properties Base Physical properties Tastes sour Tastes bitter Feels slippery or slimy Chemical properties Chemical properties
More informationCAE -Finite Element Method
16.810 Engineering Design and Rapid Prototyping CAE -Finite Element Method Instructor(s) Prof. Olivier de Weck January 11, 2005 Plan for Today Hand Calculations Aero Æ Structures FEM Lecture (ca. 45 min)
More informationChapter 5: Diffusion. 5.1 Steady-State Diffusion
: Diffusion Diffusion: the movement of particles in a solid from an area of high concentration to an area of low concentration, resulting in the uniform distribution of the substance Diffusion is process
More informationAn Introduction to Partial Differential Equations
An Introduction to Partial Differential Equations Andrew J. Bernoff LECTURE 2 Cooling of a Hot Bar: The Diffusion Equation 2.1. Outline of Lecture An Introduction to Heat Flow Derivation of the Diffusion
More informationDiscovering Electrochemical Cells
Discovering Electrochemical Cells Part I Electrolytic Cells Many important industrial processes PGCC CHM 102 Cell Construction e e power conductive medium What chemical species would be present in a vessel
More informationCELL POTENTIAL, E. Terms Used for Galvanic Cells. Uses of E o Values CELL POTENTIAL, E. Galvanic Cell. Organize halfreactions
Electrons move from anode to cathode in the wire. Anions & cations move thru the salt bridge. Terms Used for Galvanic Cells Galvanic Cell We can calculate the potential of a Galvanic cell using one of
More informationChapter 22: Electric Flux and Gauss s Law
22.1 ntroduction We have seen in chapter 21 that determining the electric field of a continuous charge distribution can become very complicated for some charge distributions. t would be desirable if we
More information6 J - vector electric current density (A/m2 )
Determination of Antenna Radiation Fields Using Potential Functions Sources of Antenna Radiation Fields 6 J - vector electric current density (A/m2 ) M - vector magnetic current density (V/m 2 ) Some problems
More informationColligative Properties
CH302 LaBrake and Vanden Bout Colligative Properties PROBLEM #1: Give the molecular formula, the van t hoff factor for the following Ionic Compounds as well as guess the solubility of the compounds. If
More informationCONSERVATION LAWS. See Figures 2 and 1.
CONSERVATION LAWS 1. Multivariable calculus 1.1. Divergence theorem (of Gauss). This states that the volume integral in of the divergence of the vector-valued function F is equal to the total flux of F
More information13.3 Factors Affecting Solubility Solute-Solvent Interactions Pressure Effects Temperature Effects
Week 3 Sections 13.3-13.5 13.3 Factors Affecting Solubility Solute-Solvent Interactions Pressure Effects Temperature Effects 13.4 Ways of Expressing Concentration Mass Percentage, ppm, and ppb Mole Fraction,
More informationMOS (metal-oxidesemiconductor) 李 2003/12/19
MOS (metal-oxidesemiconductor) 李 2003/12/19 Outline Structure Ideal MOS The surface depletion region Ideal MOS curves The SiO 2 -Si MOS diode (real case) Structure A basic MOS consisting of three layers.
More information: : Solutions to Additional Bonding Problems
Solutions to Additional Bonding Problems 1 1. For the following examples, the valence electron count is placed in parentheses after the empirical formula and only the resonance structures that satisfy
More informationElectromagnetism Laws and Equations
Electromagnetism Laws and Equations Andrew McHutchon Michaelmas 203 Contents Electrostatics. Electric E- and D-fields............................................. Electrostatic Force............................................2
More informationHow to transform, with a capacitor, thermal energy into usable work.
How to transform, with a capacitor, thermal energy into usable work. E. N. Miranda 1 CONICET CCT Mendoza 55 Mendoza, Argentina and Facultad de Ingeniería Universidad de Mendoza 55 Mendoza, Argentina Abstract:
More informationChapter 13: Electrochemistry. Electrochemistry. The study of the interchange of chemical and electrical energy.
Chapter 13: Electrochemistry Redox Reactions Galvanic Cells Cell Potentials Cell Potentials and Equilbrium Batteries Electrolysis Electrolysis and Stoichiometry Corrosion Prevention Electrochemistry The
More informationFluid Mechanics: Static s Kinematics Dynamics Fluid
Fluid Mechanics: Fluid mechanics may be defined as that branch of engineering science that deals with the behavior of fluid under the condition of rest and motion Fluid mechanics may be divided into three
More informationFluids and Solids: Fundamentals
Fluids and Solids: Fundamentals We normally recognize three states of matter: solid; liquid and gas. However, liquid and gas are both fluids: in contrast to solids they lack the ability to resist deformation.
More informationSupercapacitors. Advantages Power density Recycle ability Environmentally friendly Safe Light weight
Supercapacitors Supercapacitors also called ultracapacitors and electric double layer capacitors (EDLC) are capacitors with capacitance values greater than any other capacitor type available today. Capacitance
More information1. Fluids Mechanics and Fluid Properties. 1.1 Objectives of this section. 1.2 Fluids
1. Fluids Mechanics and Fluid Properties What is fluid mechanics? As its name suggests it is the branch of applied mechanics concerned with the statics and dynamics of fluids - both liquids and gases.
More informationHands-on electrochemical impedance spectroscopy Discussion session. Literature:
Hands-on electrochemical impedance spectroscopy Discussion session Literature: Program for the day 10.00-10.30 General electrochemistry (shjj) 11.10-11.20 Relationship between EIS and electrochemical processes
More informationCBE 6333, R. Levicky 1 Review of Fluid Mechanics Terminology
CBE 6333, R. Levicky 1 Review of Fluid Mechanics Terminology The Continuum Hypothesis: We will regard macroscopic behavior of fluids as if the fluids are perfectly continuous in structure. In reality,
More informationDielectric analysis of macroporous anion-exchange resin beads suspensions
Journal of Colloid and Interface Science 276 2004 85 91 www.elsevier.com/locate/jcis Dielectric analysis of macroporous anion-exchange resin beads suspensions Zhen Chen a and Kong-Shuang Zhao b, a Department
More informationLecture 3 Fluid Dynamics and Balance Equa6ons for Reac6ng Flows
Lecture 3 Fluid Dynamics and Balance Equa6ons for Reac6ng Flows 3.- 1 Basics: equations of continuum mechanics - balance equations for mass and momentum - balance equations for the energy and the chemical
More informationElectrochemistry Voltaic Cells
Electrochemistry Voltaic Cells Many chemical reactions can be classified as oxidation-reduction or redox reactions. In these reactions one species loses electrons or is oxidized while another species gains
More informationCurrent, Resistance and Electromotive Force. Young and Freedman Chapter 25
Current, Resistance and Electromotive Force Young and Freedman Chapter 25 Electric Current: Analogy, water flowing in a pipe H 2 0 gallons/minute Flow Rate is the NET amount of water passing through a
More informationChemistry B11 Chapter 6 Solutions and Colloids
Chemistry B11 Chapter 6 Solutions and Colloids Solutions: solutions have some properties: 1. The distribution of particles in a solution is uniform. Every part of the solution has exactly the same composition
More information( )( 10!12 ( 0.01) 2 2 = 624 ( ) Exam 1 Solutions. Phy 2049 Fall 2011
Phy 49 Fall 11 Solutions 1. Three charges form an equilateral triangle of side length d = 1 cm. The top charge is q = - 4 μc, while the bottom two are q1 = q = +1 μc. What is the magnitude of the net force
More informationModule 1 : Conduction. Lecture 5 : 1D conduction example problems. 2D conduction
Module 1 : Conduction Lecture 5 : 1D conduction example problems. 2D conduction Objectives In this class: An example of optimization for insulation thickness is solved. The 1D conduction is considered
More informationBoyles Law. At constant temperature the volume occupied by a fixed amount of gas is inversely proportional to the pressure on the gas 1 P = P
Boyles Law At constant temperature the volume occupied by a fixed amount of gas is inversely proportional to the pressure on the gas 1 or k 1 Boyles Law Example ressure olume Initial 2.00 atm 100 cm 3
More informationTheme 3: Bonding and Molecular Structure. (Chapter 8)
Theme 3: Bonding and Molecular Structure. (Chapter 8) End of Chapter questions: 5, 7, 9, 12, 15, 18, 23, 27, 28, 32, 33, 39, 43, 46, 67, 77 Chemical reaction valence electrons of atoms rearranged (lost,
More informationTHE CONDUCTIVITY OF LOW CONCENTRATIONS OF CO 2 DISSOLVED IN ULTRAPURE WATER FROM 0-100 C
THE CONDUCTIVITY OF LOW CONCENTRATIONS OF CO 2 DISSOLVED IN ULTRAPURE WATER FROM 0-100 C Truman S. Light, Elizabeth A. Kingman, and Anthony C. Bevilacqua Thornton Associates, Inc. 1432 Main Street Waltham,
More informationThis value, called the ionic product of water, Kw, is related to the equilibrium constant of water
HYDROGEN ION CONCENTRATION - ph VALUES AND BUFFER SOLUTIONS 1. INTRODUCTION Water has a small but definite tendency to ionise. H 2 0 H + + OH - If there is nothing but water (pure water) then the concentration
More informationFree Electron Fermi Gas (Kittel Ch. 6)
Free Electron Fermi Gas (Kittel Ch. 6) Role of Electrons in Solids Electrons are responsible for binding of crystals -- they are the glue that hold the nuclei together Types of binding (see next slide)
More informationFLUID DYNAMICS. Intrinsic properties of fluids. Fluids behavior under various conditions
FLUID DYNAMICS Intrinsic properties of fluids Fluids behavior under various conditions Methods by which we can manipulate and utilize the fluids to produce desired results TYPES OF FLUID FLOW Laminar or
More informationThe MOS Transistor in Weak Inversion
MOFE Operation in eak and Moderate nversion he MO ransistor in eak nversion n this section we will lore the behavior of the MO transistor in the subthreshold regime where the channel is weakly inverted.
More informationHeating & Cooling in Molecular Clouds
Lecture 8: Cloud Stability Heating & Cooling in Molecular Clouds Balance of heating and cooling processes helps to set the temperature in the gas. This then sets the minimum internal pressure in a core
More informationMOLARITY = (moles solute) / (vol.solution in liter units)
CHEM 101/105 Stoichiometry, as applied to Aqueous Solutions containing Ionic Solutes Lect-05 MOLES - a quantity of substance. Quantities of substances can be expressed as masses, as numbers, or as moles.
More informationMCE380: Measurements and Instrumentation Lab. Chapter 9: Force, Torque and Strain Measurements
MCE380: Measurements and Instrumentation Lab Chapter 9: Force, Torque and Strain Measurements Topics: Elastic Elements for Force Measurement Dynamometers and Brakes Resistance Strain Gages Holman, Ch.
More informationQuestion Bank Electrolysis
Question Bank Electrolysis 1. (a) What do you understand by the terms (i) electrolytes (ii) non-electrolytes? (b) Arrange electrolytes and non-electrolytes from the following substances (i) sugar solution
More informationCHEMISTRY STANDARDS BASED RUBRIC ATOMIC STRUCTURE AND BONDING
CHEMISTRY STANDARDS BASED RUBRIC ATOMIC STRUCTURE AND BONDING Essential Standard: STUDENTS WILL UNDERSTAND THAT THE PROPERTIES OF MATTER AND THEIR INTERACTIONS ARE A CONSEQUENCE OF THE STRUCTURE OF MATTER,
More informationLecture 14 Capacitance and Conductance
Lecture 14 Capacitance and Conductance ections: 6.3, 6.4, 6.5 Homework: ee homework file Definition of Capacitance capacitance is a measure of the ability of the physical structure to accumulate electrical
More informationChapter 8 Concepts of Chemical Bonding
Chapter 8 Concepts of Chemical Bonding Chemical Bonds Three types: Ionic Electrostatic attraction between ions Covalent Sharing of electrons Metallic Metal atoms bonded to several other atoms Ionic Bonding
More informationVacuum Evaporation Recap
Sputtering Vacuum Evaporation Recap Use high temperatures at high vacuum to evaporate (eject) atoms or molecules off a material surface. Use ballistic flow to transport them to a substrate and deposit.
More informationExplain the ionic bonds, covalent bonds and metallic bonds and give one example for each type of bonds.
Problem 1 Explain the ionic bonds, covalent bonds and metallic bonds and give one example for each type of bonds. Ionic Bonds Two neutral atoms close to each can undergo an ionization process in order
More informationREVIEW QUESTIONS Chapter 8
Chemistry 51 ANSWER KEY REVIEW QUESTIONS Chapter 8 1. Identify each of the diagrams below as strong electrolyte, weak electrolyte or non-electrolyte: (a) Non-electrolyte (no ions present) (b) Weak electrolyte
More informationLecture 17: Conformal Invariance
Lecture 17: Conformal Invariance Scribe: Yee Lok Wong Department of Mathematics, MIT November 7, 006 1 Eventual Hitting Probability In previous lectures, we studied the following PDE for ρ(x, t x 0 ) that
More informationSection 3: Crystal Binding
Physics 97 Interatomic forces Section 3: rystal Binding Solids are stable structures, and therefore there exist interactions holding atoms in a crystal together. For example a crystal of sodium chloride
More informationPhysics Notes Class 11 CHAPTER 2 UNITS AND MEASUREMENTS
1 P a g e Physics Notes Class 11 CHAPTER 2 UNITS AND MEASUREMENTS The comparison of any physical quantity with its standard unit is called measurement. Physical Quantities All the quantities in terms of
More informationBruce B. Weiner, Walther W. Tscharnuter, David Fairhurst Brookhaven Instruments Corporation Holtsville, NY 11742 US
Zeta Potential: A New Approach by Bruce B. Weiner, Walther W. Tscharnuter, David Fairhurst Brookhaven Instruments Corporation Holtsville, NY 11742 US A paper presented at the Canadian Mineral Analysts
More informationElasticity Theory Basics
G22.3033-002: Topics in Computer Graphics: Lecture #7 Geometric Modeling New York University Elasticity Theory Basics Lecture #7: 20 October 2003 Lecturer: Denis Zorin Scribe: Adrian Secord, Yotam Gingold
More informationExperiments on the Basics of Electrostatics (Coulomb s law; Capacitor)
Experiments on the Basics of Electrostatics (Coulomb s law; Capacitor) ZDENĚK ŠABATKA Department of Physics Education, Faculty of Mathematics and Physics, Charles University in Prague The physics textbooks
More informationThe Electric Field. Electric Charge, Electric Field and a Goofy Analogy
. The Electric Field Concepts and Principles Electric Charge, Electric Field and a Goofy Analogy We all know that electrons and protons have electric charge. But what is electric charge and what does it
More informationLevel Set Framework, Signed Distance Function, and Various Tools
Level Set Framework Geometry and Calculus Tools Level Set Framework,, and Various Tools Spencer Department of Mathematics Brigham Young University Image Processing Seminar (Week 3), 2010 Level Set Framework
More information1. Degenerate Pressure
. Degenerate Pressure We next consider a Fermion gas in quite a different context: the interior of a white dwarf star. Like other stars, white dwarfs have fully ionized plasma interiors. The positively
More informationReview - After School Matter Name: Review - After School Matter Tuesday, April 29, 2008
Name: Review - After School Matter Tuesday, April 29, 2008 1. Figure 1 The graph represents the relationship between temperature and time as heat was added uniformly to a substance starting at a solid
More information4. Introduction to Heat & Mass Transfer
4. Introduction to Heat & Mass Transfer This section will cover the following concepts: A rudimentary introduction to mass transfer. Mass transfer from a molecular point of view. Fundamental similarity
More informationTo calculate the value of the boiling point constant for water. To use colligative properties to determine the molecular weight of a substance.
Colligative Properties of Solutions: A Study of Boiling Point Elevation Amina El-Ashmawy, Collin County Community College (With contributions by Timm Pschigoda, St. Joseph High School, St. Joseph, MI)
More informationCh 20 Electrochemistry: the study of the relationships between electricity and chemical reactions.
Ch 20 Electrochemistry: the study of the relationships between electricity and chemical reactions. In electrochemical reactions, electrons are transferred from one species to another. Learning goals and
More informationDivergence and Curl of the Magnetic Field
Divergence and Curl of the Magnetic Field The static electric field E(x,y,z such as the field of static charges obeys equations E = 1 ǫ ρ, (1 E =. (2 The static magnetic field B(x,y,z such as the field
More informationCh 2 Properties of Fluids - II. Ideal Fluids. Real Fluids. Viscosity (1) Viscosity (3) Viscosity (2)
Ch 2 Properties of Fluids - II Ideal Fluids 1 Prepared for CEE 3500 CEE Fluid Mechanics by Gilberto E. Urroz, August 2005 2 Ideal fluid: a fluid with no friction Also referred to as an inviscid (zero viscosity)
More informationTotal body water ~(60% of body mass): Intracellular fluid ~2/3 or ~65% Extracellular fluid ~1/3 or ~35% fluid. Interstitial.
http://www.bristol.ac.uk/phys-pharm/teaching/staffteaching/sergeykasparov.htmlpharm/teaching/staffteaching/sergeykasparov.html Physiology of the Cell Membrane Membrane proteins and their roles (channels,
More informationInsertion Devices Lecture 4 Permanent Magnet Undulators. Jim Clarke ASTeC Daresbury Laboratory
Insertion Devices Lecture 4 Permanent Magnet Undulators Jim Clarke ASTeC Daresbury Laboratory Introduction to Lecture 4 So far we have discussed at length what the properties of SR are, when it is generated,
More informationLecture 3: Optical Properties of Bulk and Nano. 5 nm
Lecture 3: Optical Properties of Bulk and Nano 5 nm The Previous Lecture Origin frequency dependence of χ in real materials Lorentz model (harmonic oscillator model) 0 e - n( ) n' n '' n ' = 1 + Nucleus
More informationUniversity of Maryland Fraternity & Sorority Life Spring 2015 Academic Report
University of Maryland Fraternity & Sorority Life Academic Report Academic and Population Statistics Population: # of Students: # of New Members: Avg. Size: Avg. GPA: % of the Undergraduate Population
More informationK + Cl - Metal M. Zinc 1.0 M M(NO
Redox and Electrochemistry This section should be fresh in your minds because we just did this section in the text. Closely related to electrochemistry is redox chemistry. Count on at least one question
More informationGeometric Optics Converging Lenses and Mirrors Physics Lab IV
Objective Geometric Optics Converging Lenses and Mirrors Physics Lab IV In this set of lab exercises, the basic properties geometric optics concerning converging lenses and mirrors will be explored. The
More informationCHM1 Review for Exam 12
Topics Solutions 1. Arrhenius Acids and bases a. An acid increases the H + concentration in b. A base increases the OH - concentration in 2. Strong acids and bases completely dissociate 3. Weak acids and
More informationLiquid Conductivity: Measuring Conductivity in Saline Water Solutions (Teacher s Guide)
Liquid Conductivity: Measuring Conductivity in Saline Water Solutions (Teacher s Guide) OVERVIEW Students measure the conductivity of a solution of distilled water with varying amounts of NaCl and will
More information1 The basic equations of fluid dynamics
1 The basic equations of fluid dynamics The main task in fluid dynamics is to find the velocity field describing the flow in a given domain. To do this, one uses the basic equations of fluid flow, which
More informationCHEM 110: CHAPTER 3: STOICHIOMETRY: CALCULATIONS WITH CHEMICAL FORMULAS AND EQUATIONS
1 CHEM 110: CHAPTER 3: STOICHIOMETRY: CALCULATIONS WITH CHEMICAL FORMULAS AND EQUATIONS The Chemical Equation A chemical equation concisely shows the initial (reactants) and final (products) results of
More informationThe Quantum Harmonic Oscillator Stephen Webb
The Quantum Harmonic Oscillator Stephen Webb The Importance of the Harmonic Oscillator The quantum harmonic oscillator holds a unique importance in quantum mechanics, as it is both one of the few problems
More informationCHAPTER 21 ELECTROCHEMISTRY
Chapter 21: Electrochemistry Page 1 CHAPTER 21 ELECTROCHEMISTRY 21-1. Consider an electrochemical cell formed from a Cu(s) electrode submerged in an aqueous Cu(NO 3 ) 2 solution and a Cd(s) electrode submerged
More informationSoil Suction. Total Suction
Soil Suction Total Suction Total soil suction is defined in terms of the free energy or the relative vapor pressure (relative humidity) of the soil moisture. Ψ = v RT ln v w 0ω v u v 0 ( u ) u = partial
More informationElectricity. Confirming Coulomb s law. LD Physics Leaflets P3.1.2.2. 0909-Wie. Electrostatics Coulomb s law
Electricity Electrostatics Coulomb s law LD Physics Leaflets Confirming Coulomb s law P3... Measuring with the force sensor and newton meter Objects of the experiments Measuring the force between two charged
More informationThe Lewis structure is a model that gives a description of where the atoms, charges, bonds, and lone pairs of electrons, may be found.
CEM110 Week 12 Notes (Chemical Bonding) Page 1 of 8 To help understand molecules (or radicals or ions), VSEPR shapes, and properties (such as polarity and bond length), we will draw the Lewis (or electron
More informationScalars, Vectors and Tensors
Scalars, Vectors and Tensors A scalar is a physical quantity that it represented by a dimensional number at a particular point in space and time. Examples are hydrostatic pressure and temperature. A vector
More informationTitrations. Acid-Base Indicators and Titration Curves. Shapes of Titration Curves. A titration curve is a graphical history of a titration
Acid-Base Indicators and Titration Curves Titrations In a titration a solution of accurately known concentration is added gradually added to another solution of unknown concentration until the chemical
More informationReporting: one report / group. The results of the carryover load calculations will also be reported to Metsä Fibre, Rauma.
Carryover load Your task is to use the obtained experimental result from the probe measurement in combination with the information given in this handout to calculate the carryover load (g/nm 3 dry flue
More informationVacuum Technology. Kinetic Theory of Gas. Dr. Philip D. Rack
Kinetic Theory of Gas Assistant Professor Department of Materials Science and Engineering University of Tennessee 603 Dougherty Engineering Building Knoxville, TN 3793-00 Phone: (865) 974-5344 Fax (865)
More informationCLASS TEST GRADE 11. PHYSICAL SCIENCES: PHYSICS Test 3: Electricity and magnetism
CLASS TEST GRADE 11 PHYSICAL SCIENCES: PHYSICS Test 3: Electricity and magnetism MARKS: 45 TIME: 1 hour INSTRUCTIONS AND INFORMATION 1. Answer ALL the questions. 2. You may use non-programmable calculators.
More information3/5/2014. iclicker Participation Question: A. MgS < AlP < NaCl B. MgS < NaCl < AlP C. NaCl < AlP < MgS D. NaCl < MgS < AlP
Today: Ionic Bonding vs. Covalent Bonding Strengths of Covalent Bonds: Bond Energy Diagrams Bond Polarities: Nonpolar Covalent vs. Polar Covalent vs. Ionic Electronegativity Differences Dipole Moments
More information