Marine after-treatment from STT Emtec AB

Transcription

1 Marine after-treatment from STT Emtec AB For Your Vessel and the Environment Recommended by Volvo Penta

2 SCR Catalyst 2. Injection nozzle 3. Mixer unit 4. Diagnostic display 5. Urea tank 6. Urea dosing unit 7. Electronic control unit (ECU) 8. Urea pressure sensor 9. Control cabinet 10. Air pressure regulator 11. Temperature sensor 12. Exhaust pressure sensor 13. NOx sensor 14. Urea line; from pump to nozzle 15. Urea line; from pump to tank 16. Urea line; from tank to pump Marine SCR system for engines up to 600 kw Up to 90% NOx reduction Suitable for retrofit This system reduces NOx through selective catalysis with urea as the reduction agent. The urea will decompose to ammonia in the exhaust stream, which in turn will reduce the NOx on the SCR catalyst surface. Compressed air is used to achieve a high degree of urea atomization in the exhaust. This, together with the flow optimized mixer minimizes risk of clogging and guaranties the high level of performance and trouble free operation. The required amount of air is 25 l/min (NTP) with a minimum pressure of 4 bar (absolute). The system operates on fuel sulphur levels up to 1000 ppm. 7 Example of weighted NO x emission from E3 cycle (g/kwh) Engine out With SCR marine

3 SCR Catalyst 2. Injection nozzle 3. Mixer unit 4. Diagnostic display 5. Urea tank 6. Urea dosing unit 7. Electronic control unit (ECU) 8. Urea pressure sensor 9. Control cabinet 10. Air pressure regulator 11. Temperature sensor 12. Exhaust pressure sensor 13. NOx sensor 14. Urea line; from pump to nozzle 15. Urea line; from pump to tank 16. Urea line; from tank to pump 17. POC Combined SCR and POC system for engines up to 600 kw. For low sulphur fuel (EN590) Up to 90% NOx reduction Up to 40% PM reduction More than 90% reduction of HC and CO 0.8 Example of weighted emissions from E3 cycle (g/kwh) With SCR marine Without SCR marine CO HC PM NOx / 10 3

4 Technical specifications Tank: 100 l, preassembled with bulk tank connection Urea consumption: 4-6% of the fuel consumption Air consumption: 25 l/min at 6 bar Supply voltage: 230 VAC or 24 VDC Current consumption: Nominal 10 A Ambient temperature: C or better (complete installation) Installation time complete system: 3-5 days Service interval: visual inspection every 6 month urea inlet filter 8000 hours or 12 month Data Logger embedded in the control unit Dual CAN bus SAE-J1939 4

5 STT Emtec configurations for engines up to 600 kw The SCR marine system is optimized for a wide range of exhaust flows. The exhaust gas flow is related to the engine power. The system is available for engine power up to 600 kw as showed below. Engine power, kw Recommended SCR configuration < 110 SCR marine ME 110 < 210 SCR marine MD 210 < 300 SCR marine LC 300 < 480 SCR marine LB 480 < 600 SCR marine LA 5

6 STT monitoring systems Control cabinet PC based software for system monitoring. Example of parameters that can be viewed and adjusted using the EmtecMapper Monitoring System: Setup the data logger and download logger data. View and clear error codes. View live system operation. STT Diagnostic Module All control cabinets are equipped with a diagnostic module integrated in the cabinet door. This display shows the system status and possible error codes. STT Control Room Rack The control room rack is useful in multiple engine installations. The control room rack works as a hub and collects data from all systems. 6

7 STT monitoring systems In operation

8 STT Emtec in brief The history of STT Emtec, headquartered in Sundsvall, Sweden, goes back to Originally involved in land based diesel engine technologies, the vision has always been to establish the company as one of the world leading technology providers in the field of emissions and engine performance systems, many of which have been developed in house. As well as providing after-market systems STT Emtec is a key component supplier to the world s automotive, marine and industrial engine manufacturers. Layout and original: Areskoog Reklam AB Print: Tryckeribolaget AB, Sundsvall, Sweden, October 2011 The move into emission control systems for the maritime sector is a natural progression from the automotive experience. It is obvious that the technologies from STT Emtec will contribute considerably to the shipping industry s emission reduction efforts. For further information: STT Emtec AB (publ) Box 100 SE Sundsvall SWEDEN Phone: Fax: info@sttemtec.com Web: Your local contact: