Solenoid Valve SVA20 Series

Size: px
Start display at page:

Download "Solenoid Valve SVA20 Series"

Transcription

1 ush-in Fitting Incorporated Type Manifold Solenoid Valve Solenoid Valve 0 Series Lightweight and Large Capacity Effective Sectional rea 18mm (Cv 0.97) with valve width 16mm (5/8" ) Various Valve Selections

2 SOLENOID VLVE Series Solenoid Valve 0 Series Characteristics Easy maintenance by a single-screw mechanism. 3 selections of wiring; Sub-D, Flat (ibbon) Cable and Individual lug-in Connector selections of connector lead-out direction: (Top and Side) color selections: lack and Light Gray Check Valve can be selected for each exhaust port for each to prevent back pressure actuators are operated independently and simultaneously by Twin 3-Way Solenoid Valve Vacuum-Operable / 3-ort Solenoid Valve Vacuum-Operable / 3-ort Solenoid Valve which does not require an external piping and has the same function as external pilot system. Elimination of external piping thus allowing these valves to be mounted along with other types of valves. This saves wiring, piping, and space. Selectable from single solenoid and double solenoid. DIN ail Mounting racket Easy and speedy attachment and detachment of DIN rail (width: 35mm). Installing a valve manifold on a DIN rail firmly. Dual ressure Option ossible to control different pressures in one manifold.

3 Construction -osition, 5-ort, Single Solenoid Valve ( S) 14 5(1) 4() 1() () 3() JIS osition, 5-ort Double Solenoid Valve ( D) 14 5(1) 4() 1() () 3() JIS osition, 3-ort, Solenoid Valve (Twin 3-Way Valve) 5 4 No. art Material 1 Fitting ss'y Manifold-block olyamide ase lastic 3 ilot Valve ss'y 4 Electric Component ss'y 5 Valve ody T GF15% 6 Check Valve ss'y 7 iston Nickel-plated brass (Electroless Ni plating) 8 Spool luminum lloy 9 Sleeve luminum lloy Slide art OM GF5% 11 Fixing racket Nickel-plated brass (Electroless Ni plating) Spool Seal ubber N 13 ush-lock Manual utton No. art Material 1 Fitting ss'y Manifold-block olyamide ase lastic 3 ilot Valve ss'y 4 Electric Component ss'y 5 Valve ody T GF15% 6 Check Valve ss'y 7 iston Nickel-plated brass (Electroless Ni plating) 8 Spool luminum lloy 9 Sleeve luminum lloy Slide art OM GF5% 11 Fixing racket Nickel-plated brass (Electroless Ni plating) Spool Seal ubber N 13 ush-lock Manual utton / ort: Normally Closed ( E) 14 / ort: Normally Open ( F) 14 5(1) 4() 5(1) 4() 1() 1() 3() () 3() () JIS JIS ort: Normally Closed, ort: Normally Open 14 ort: Normally Open, ort: Normally Closed 14 5(1) 4() 5(1) 4() 1() 1() 3() () 3() () JIS JIS

4 3-osition, 5-ort, Double Solenoid Valve Closed Center ( ) Exhaust Center ( ) (1) 1() 3() 4() () 5(1) 1() 3() 4() () JIS JIS ressure Center ( ) 14 5(1) 1() 3() 4() () JIS Vacuum-Operable /3 ort Solenoid Valve -osition, -ort, Single Solenoid Valve ( T) -osition, -ort, Double Solenoid Valve ( U) 1() () JIS 1() () JIS -osition, 3-ort Single Solenoid Valve ( V) -osition,3-ort, Double Solenoid Valve ( W) 3() 1() () JIS 3() 1() JIS ()

5 SOLENOID VLVE Series Solenoid Valve 0 Series Model Designation of 0 Manifold Type(Example) /4C 3/8L 08 S esin Solenoid Valve 0 Series (Valve width: 5/8" (16mm) ) 1 Number of Stations 1 Number of Stations Intake & Exhaust lock 3 Output ort Size 4 Intake ort Size 5 Exhaust Check Valve 6 Exhaust ort Size Code No. of stations Max. stations for Sub-D connector specifications Intake & Exhaust lock :Intake & Exhaust lock on oth Sides :Intake & Exhaust lock on One Side 3 Output ort Size Fitting Type ush-in Fitting (mm) ush-in Fitting (inch) Code 1C 1/4C 5/16C 1L 1/4L 5/16L 6C 8C 6L 8L Size (O.D.) Combination Combination ø1/4 ø5/16 ø1/4 ø5/16 ø6 ø8 ø6 ø8 of ort Size of ort Size iping Top Top Side Side direction (Elbow fitting) (Elbow fitting) 4 Intake ort Size Fitting Type ush-in Fitting (inch) ush-in Fitting (mm) Code 5/16C 3/8C 1/C 5/16L 3/8L 1/L 8C 0C C 8L 0L L Size (O.D.) ø5/16 ø3/8 ø1/ ø5/16 ø3/8 ø1/ ø8 ø ø ø8 ø ø iping Top Top Side Side direction (Elbow fitting) (Elbow fitting) 5 Exhaust Check Valve No Code:without Check Valve :with Check Valve Code Qty Exhaust ort Size Fitting Type ush-in Fitting (inch) ush-in Fitting (mm) Silencer (Open-air exhaust) Code 5/16 3/8 1/ 8 0 S Size (O.D.) ø5/16 ø3/8 ø1/ ø8 ø ø - * The piping direction of Exhaust ort is the same direction as that of Intake ort. * Use the order format when ordering.

6 F W K D4 MC 8 7 Color Wiring Type 9 Valve Type Valve Coil Voltage 13 Common Input DIN ail Mounting racket 11 Dual ressure Option 7 Wiring Type D:Sub-D Connector S:Individual lug-in Connector F:Flat (ibbon) Cable Connector 8 Color :lack W:Light Gray 9 Valve Type Code osition # of ort Valve Function Code osition # of ort Valve Function S 5 Single Solenoid T Single Solenoid (available for vacuum system) D 5 Double Solenoid U Double Solenoid (available for vacuum system) E 3 4().().Normally Closed (Twin 3-Way Valve) V 3 Single Solenoid (available for vacuum system) F 3 4().().Normally Open (Twin 3-Way Valve) W 3 Double Solenoid (available for vacuum system) G 3 4().Normally Closed, ().Normally Open K Combination of Valves H 3 4().Normally Open, ().Normally Closed lock late 3 5 Closed Center M Manifold-base Only 3 5 Exhaust Center 3 5 ressure Center Valve Coil Voltage D4:DC4V 0:C0V 11 Dual ressure Option No Code:Single ressure :Dual ressure (*) lease specify where on the manifold to mount using the order form. (efer to the code example) For the manifold type with Dual ressure, Intake & Exhaust lock (Intake & Exhaust lock on oth Sides) is only selectable. DIN ail Mounting racket No Code:Without racket D:With racket ( 1 set (pcs) is equipped.) 13 Common olarity Specification No Code:ositive common MC:Negative common Negative common, MC is selectable when coil voltage is 4VDC

7 Solenoid Valve 0 Series Model Designation of Mounting Unit (Example) 0 D D4 D MC esin Solenoid Valve 0 Series (Valve width: 5/8" (16mm)) 1 Valve Type 4 Color 3 Wiring Type Valve Coil Voltage 5 Common Input 1 Valve Type Code osition No. of ort Valve Type Code osition No. of ort Valve Type S 5 Single Solenoid 3 5 Closed Center D 5 Double Solenoid 3 5 Exhaust Center E 3 4().().Normally Closed (Twin 3-Way Valve) 3 5 ressure Center F 3 4().().Normally Open (Twin 3-Way Valve) T Single Solenoid (available for vacuum system) G 3 4().Normally Closed, ().Normally Open U Double Solenoid (available for vacuum system) H 3 4().Normally Open, ().Normally Closed V 3 Single Solenoid (available for vacuum system) W 3 Double Solenoid (available for vacuum system) Valve Coil Voltage D4:DC4V 0:C0V 3 Wiring Type D:Concentrated wiring (Sub-D connector / Flat (ibbon) Cable Connector) S:Individual lug-in Connector 4 Color :lack W:Ivory 5 Common olarity Specification No Code:ositive common MC:Negative common Negative common, MC is selectable when coil voltage is 4VDC Model Code of DIN ail Mounting racket DF35S DIN ail Mounting racket

8 Code Example Model Series Number of Intake /Exh. Output Intake Exhaust Exhaust Wiring Color Valve Coil Dual ressure Stations lock config. ort Size ort Size Check Valve ort Size Type Type Voltage Option C 3/8C 03 S F K D4 D DIN ail racket Common Input 13 MC St.1 St. St.3 St.8. Station Number is counted St.1, St., St.3 St.8 from left side with the tube fittings at the front as shown in the figure. Station Number Output ort Size Exhaust Check Valve Valve Type Dual ressure Option St 1 1/4 0 S St 1/4 0 S St S St W St 5 5/16 0 W O St 6 5/16 0 D St D St D From : Order Form: 0 Series Name : Order # : Date : equested EX-W ISCO Date : Quantity : Series Number of Intake /Exh. Stations lock config. 1 0 Output ort Size 3 Intake ort Size 4 Exhaust Check Valve 5 Exhaust ort Size 6 Wiring Type 7 Color 8 Valve Type 9 Coil Voltage Dual ressure Option 11 DIN ail racket Common Input 13 Station No. Output ort Size Exhaust Check Valve Valve Type Dual ressure Option St 1 St St 3 St 4 St 5 St 6 St 7 St.8 St.9 St. St.11 St. St.13 St.14 St.15 St.16 St.17 St.18 St.19 St.0 * Write a circle for Dual ressure Option to indicate the border where the air pressure is separated.

9 Manifold Specification Model Item D D 0 - -F 0 - -F 0 - -S 0 - -S Fluid Medium Operating ressure ange 30~0psi (0. ~0.7Ma) ressure esistance Operating Temp. ange 150psi (1.05Ma) 40~ 0 F (5~50ºC) Installing Direction No estriction (*1) Max. Mountable Number of Valve Unit Max. units Max. 19 units ø5/16" ø8mm ø5/16" 1 ø8mm 1 ø5/16" ø8mm ø5/16" 1 ø8mm 1 ø5/16" ø8mm ø5/16" 1 ø8mm 1 1().5(1).3() ø3/8" ømm ø3/8" 1 ømm 1 ø3/8" ømm ø3/8" 1 ømm 1 ø3/8" ømm ø3/8" 1 ømm 1 Fitting O.D. ort ø1/" ømm ø1/" 1 ømm 1 ø1/" ømm ø1/" 1 ømm 1 ø1/" ømm ø1/" 1 ømm 1 4().() ort ush-in Fitting:1/4", 5/16", ø6mm, ø8mm Wiring Type Type Sub-D connector Flat (ibbon) Cable Connector Individual lug-in Connector # of in 9 pins and 5 pins (*) pins, 6 pins and 40 pins ( 3) 3 pins Silencer Standard equipment only for 5(1) and 3() port with open-air exhaust. *1. efer to Warning of Detailed Safety Instructions. *. to 4 stations: 9 pins, 5 to stations: 5 pins *3. to 4 stations: pins, 5 to stations: 6 pins, 13 to 19 stations: 40 pins ir Solenoid Valve Specifications (DC4V) Item ilot Valve Main Valve Valve Type Valve Stracture ated Coil Voltage Model 0S-D4 0D-D4 0-D4 0E-D4 0T-D4 0U-D4 0V-D4 0W-D4 0-D4 0F-D4 0-D4 0G-D4 0H-D4 Direct cting Valve Elastic Seal, oppet Valve DC4V Tolerance of Voltage ange DC1.6 ~ 6.4V ower Consumption Surge rotection Circuit Manual Operation Operating ressure ange Valve Type Valve Stracture 1.W (With LED) Diode Non-Lock ush utton neumatic Operation by ilot Valve Elastic Seal, Spool Valve Number of osition -osition 3-osition -osition Number of ort 5-ort 3-ort (*1) -ort 3-ort Valve Function Single Solenoid Double Solenoid Single Solenoid Single Solenoid Double Solenoid Single Solenoid Double Solenoid # of pilot points esponse Time (*) 18msec msec 18msec 15msec Max. Operation Cycle Min. Excitation Time 50msec 50msec 50msec Lubrication Operating ressure ange 30~0psi (0. ~0.7Ma) *1. This is a valve construction incorporating 3-port valves. 1() is common. 30~0psi (0. ~0.7Ma) 5Hz Not equired -14.5~0psi (-0.1 ~ 0.7Ma) *. Values are at air pressure of 7.5psi (0.5Ma) and from power off to on. For 3 positions valve, the value is from neutral position of all port block valve.

10 SOLENOID VLVE Series Solenoid Valve 0 Series Solenoid Valve Specifications (C0V) Model 0S-0 0D E-0 0T-0 0U-0 0V-0 0W F G-0 Item 0H-0 Valve Type Direct cting Valve Valve Stracture Elastic Seal, oppet Valve ated Coil Voltage C0V ilot Valve Tolerance of Voltage ange C90 ~ 1V ower Consumption 1.5V (with LED) Surge rotection Circuit Diode Manual Operation Non-Lock ush utton Operating ressure ange 30~0psi (0. ~0.7Ma) Valve Type neumatic Operation by ilot Valve Valve Stracture Elastic Seal, Spool Valve Number of osition -osition 3-osition -osition Number of ort 5-ort 3-ort (*1) -ort 3-ort Valve Function Single Solenoid Double Solenoid Single Solenoid Single Solenoid Double Solenoid Single Solenoid Double Solenoid Main Valve # of pilot points esponse Time (*) 18msec msec 18msec 15msec Max. Operation Cycle 5Hz Min. Excitation Time 50msec 50msec 50msec Lubrication Not equired Operating ressure ange 30~0psi (0. ~0.7Ma) -14.5~0psi (-0.1 ~ 0.7Ma) *1. There are two 3-port solenoid valves incorporated in one valve. ort 1() is common. *. esponse Time represents the value at air pressure of 7.5psi (0.5Mpa) (OFF to ON) and that of 3-osition Solenoid Valve represents the value from the neutral position with all ports blocked.

11 Flow Characteristics Model 0S- 0D E- 0F- 0G- 0T- 0U- 0V- 0W- iping ort 0H- 1() 4().() ( φ3/8", mm)(*) C (*3) S (*4) 1() 4().() (φ5/16", 8mm)(*) C (*3) S (*4) 16(0.86) 16(0.86) (0.65) 14.5(0.78) 13.5(0.73) 13.5(0.73) 1() 4().() (φ1/4", 6mm)(*) C (*3) S (*4).5(0.56).5(0.56) 9.5(0.51).5(0.56) 9(0.49) 9(0.49) 4().() (φ3/8", mm) 5(1). 3() without Check Valve (*1) C (*3) S (*4) 4().() (φ5/16", 8mm) 5(1). C (*3) () with Check Valve (*1) S (*4) 17(0.9) 17(0.9) 13(0.7).5(0.67) 14(0.76) 4().() (φ5/16", 8mm) 5(1). C (*3) () without Check Valve (*1) S (*4) 1(1.13) 1(1.13) 15(0.81) 13.5(0.73) 15.5(0.84) 4().() (φ1/4", 6mm) 5(1). C (*3).1.1 3() with Check Valve (*1) S (*4).5(0.56).5(0.56) (0.54) (0.54) (0.54) 4().() (φ1/4", 6mm) 5(1). C (*3) () without Check Valve (*1) S (*4).5(0.56).5(0.56) (0.54) (0.54) 9.5(0.51) *1. The value of.5(1) and 3() ports with Open-air Exhaust. *. () 4() piping is applied to valve type T U V W. *3. C: Sonic Conductance C(dm 3 /(s-bar) *4. S: Effective Sectional rea S(mm (CV)). Cylinder Speed Table Cylinder Tube bore (mm) Cylinder Speed (mm/s) φ0 φ5 φ3 φ40 φ50 φ63 φ80 φ0 φ5 φ Note) The cylinder average speed is referential at 7.5psi (0.5Ma) of pressure, 30% of load factor and 1m of tube length. The cylinder speed can vary according to the configuration of piping and fittings. The data in the above table represents the value when ø8mm ush-in Fitting is used on 4() and () ports of 0S-D4. DIN ail Mounting racket ecommended Tightening Torque Max. Load 0.3 ~ 0.4N m 0N

12 SOLENOID VLVE Series Solenoid Valve 0 Series Electric Circuit (DC4V) Sub-D connector 9 pins 5 pins st 1 side coil st side coil st 3 side coil st 4 side coil COMMON +V st 1 side coil st side coil st 3 side coil st 4 side coil st 5 side coil st 6 side coil st 7 side coil st 8 side coil st 9 side coil st side coil st 11 side coil st side coil COMMON +V Individual lug-in Connector (lack) (ed) COMMON +V (White) side coil Note) The color in parenthesis is lead wire color. Flat (ibbon) Cable Connector pins Triangle mark indication 6 pins Triangle mark indication 40 pins Triangle mark indication st 1 st st 3 st 4 side coil side coil side coil side coil COMMON +V Note) COMMON(+V) pins No.9 and are short-circuited inside. 0 pins st 1 st st 3 st 4 st 5 st 6 st 7 st 8 st 9 side coil side coil side coil side coil side coil side coil side coil side coil side coil COMMON +V Note) COMMON(+V) pins No.19 and 0 are short-circuited inside Triangle mark indication st 1 st st 3 st 4 st 5 st 6 st 7 st 8 st 9 st st 11 st COMMON +V side coil side coil side coil side coil side coil side coil side coil side coil side coil side coil side coil side coil Note) COMMON(+V) pins No.5 and 6 are short-circuited inside st 1 st st 3 st 4 st 5 st 6 st 7 st 8 st 9 st st 11 st st 13 st 14 st 15 st 16 st 17 st 18 st 19 COMMON +V side coil side coil side coil side coil side coil side coil side coil side coil side coil side coil side coil side coil side coil side coil side coil side coil side coil side coil side coil Note) COMMON(+V) pins No.39 and 40 are short-circuited inside

13 Electric Circuit (C0V) Sub-D connector 9 pins 5 pins st 1 side coil st side coil st 3 side coil st 4 side coil COMMON st 1 side coil st side coil st 3 side coil st 4 side coil st 5 side coil st 6 side coil st 7 side coil st 8 side coil st 9 side coil st side coil st 11 side coil st side coil COMMON Individual lug-in Connector Single Solenoid Double Solenoid (~) lue (~) lue + - (~) Common (lue) (~) side coil (White) (~) (lack) Flat (ibbon) Cable Connector pins Triangle mark indication 6 pins Triangle mark indication 40 pins Triangle mark indication st 1 side coil 3 4 st side coil 5 6 st 3 side coil 7 8 st side coil 9 COMMON Note) COMMON(+V) pins No.9 and are short-circuited inside. 0 pins Triangle mark indication 1 st 1 side coil 3 4 st + - side coil 5 6 st 3 side coil 7 8 st 4 side coil 9 st 5 side coil st 6 side coil st 7 side coil st 8 side coil st 9 side coil 19 0 COMMON 1 st 1 side coil 3 4 st + - side coil 5 6 st 3 side coil 7 8 st 4 side coil 9 st 5 side coil st 6 side coil st 7 side coil st 8 side coil st 9 side coil 19 0 st side coil 1 st 11 side coil 3 4 st side coil 5 6 COMMON Note) COMMON(+V) pins No.5 and 6 are short-circuited inside. 1 st 1 side coil 3 4 st + - side coil 5 6 st 3 side coil 7 8 st 4 side coil 9 st 5 side coil st 6 side coil st 7 side coil st 8 side coil st 9 side coil 19 0 st side coil 1 st 11 side coil 3 4 st side coil 5 6 st 13 side coil 7 8 st 14 side coil 9 30 st 15 side coil 31 3 st 16 side coil st 17 side coil st 18 side coil st 19 side coil COMMON Note) COMMON(+V) pins No.39 and 40 are short-circuited inside. Note) COMMON(+V) pins No.19 and 0 are short-circuited inside.

14 SOLENOID VLVE Series Solenoid Valve 0 Series Weight List Valve Type Weight (g) 0S D 0.5 0E.5 0F.5 0G.5 0H T 8 0U 118 0V 80 0W 118 Manifold-base Weight/Station (g) Individual Connector Type 45.5 Concentrated Wiring Type 47.5 Individual Connector Type with Check Valve 46.5 Concentrated Wiring Type with Check Valve 48.5 Manifold lock for Dual ressure Type Weight/Station (g) Individual Connector Type 46 Concentrated wiring Type 48 Individual Connector type with Check Valve 49 Concentrated Wiring type with Check Valve 47 Connector cable Type Weight (g) Manifold Type Exhaust Type Wiring Weight (g) One Side lock Tube Exhaust Individual Connector One Side lock Tube Exhaust 9 ins Sub-D connector One Side lock Tube Exhaust 5 ins Sub-D connector 185 One Side lock Tube Exhaust ins Flat (ibbon) Cable Connector One Side lock Tube Exhaust 6 ins Flat (ibbon) Cable Connector 175 One Side lock Tube Exhaust 40 ins Flat (ibbon) Cable Connector 179 One Side lock Open-air Exhaust Individual Connector 153 One Side lock Open-air Exhaust 9 ins Sub-D connector 177 One Side lock Open-air Exhaust 5 ins Sub-D connector One Side lock Open-air Exhaust ins Flat (ibbon) Cable Connector 17 One Side lock Open-air Exhaust 6 ins Flat (ibbon) Cable Connector One Side lock Open-air Exhaust 40 ins Flat (ibbon) Cable Connector oth Sides lock Tube Exhaust Individual Connector 1 oth Sides lock Tube Exhaust 9 ins Sub-D connector 45 oth Sides lock Tube Exhaust 5 ins Sub-D connector 51.5 oth Sides lock Tube Exhaust ins Flat (ibbon) Cable Connector 40 oth Sides lock Tube Exhaust 6 ins Flat (ibbon) Cable Connector 41.5 oth Sides lock Tube Exhaust 40 ins Flat (ibbon) Cable Connector 45.5 oth Sides lock Open-air Exhaust Individual Connector 17.5 oth Sides lock Open-air Exhaust 9 ins Sub-D connector 41.5 oth Sides lock Open-air Exhaust 5 ins Sub-D connector 48 oth Sides lock Open-air Exhaust ins Flat (ibbon) Cable Connector 36.5 oth Sides lock Open-air Exhaust 6 ins Flat (ibbon) Cable Connector 38 oth Sides lock Open-air Exhaust 40 ins Flat (ibbon) Cable Connector 4 0 Cartridge Fitting Weight (g) CJC CJC CJC CJC CJC 18-6 CJL CJL CJL CJL CJL CJLL CJLL CJLL CJLL CJLL CJ 18 6

15 Use the following formula to calculate the weight of 0 Series. (Manifold-base x Station Qty) + Manifold Type + (Cartridge Fitting x Qty) + (Individual Connector Cable x Qty) + (Valve Type x Qty) Example C 8C8 - S W - S - D = Manifold-base: 45.5g x 5 Manifold Type: 154.5g 3 Cartridge Fitting for Output (CJC14-06): 11.5g x 6 4 Cartridge Fitting for Intake and Exhaust (CJC18-08): 0g x 5 Individual Connector Cable (): 3g x 5 6 Valve Type (0S): 84.5g x 5 Example C 8CS - D - D - D = 854.5g 1 Manifold-base: 47.5g x 3 Manifold Type: 41.5g 3 Cartridge Fitting for Output (CJC14-06): 11.5g x 6 4 Cartridge Fitting for Intake and Exhaust (CJC18-08): 0g x 5 Valve Type (0D): 0.5g x 3 Flow Characteristics Output ressure (Ma) () ort:φmm 4() () ort:φ6mm Intake ressure (Ma) Output ressure (Ma) () ort:φmm 4() () ort:φ8mm Intake ressure (Ma) Flow ate (l/min(n)) Flow ate (l/min(n)) Standard Size List efer to the Type pages below ort Fitting Type Tube O.D. Sub-D connector ø1/4 Output port Intake & Exhaust lock ush-in Fitting ø5/16 on oth Sides Individual lug-in 4() (Straight / Elbow) ø6mm Tube Exhaust Connector () ø8mm Flat (ibbon) Cable Intake port ø5/16 Connector 1() ø3/8 ush-in Fitting ø1/ Exhaust port (Straight / Elbow) ø8mm 5/3() ømm ømm Type efer to the pages below ort Fitting Type Tube O.D. Sub-D connector ø1/4 Output port Intake & Exhaust lock ush-in Fitting ø5/16 on oth Sides Individual lug-in 4() (Straight / Elbow) ø6mm () Open-air Exhaust Connector ø8mm Flat (ibbon) Cable ø5/16 Connector ø3/8 Intake port ush-in Fitting ø1/ 1() (Straight / Elbow) ø8mm ømm ømm efer to the Type pages below ort Fitting Type Tube O.D. Sub-D connector ø1/4 Output port Intake & Exhaust lock ush-in Fitting ø5/16 on One Side Individual lug-in 4() (Straight / Elbow) ø6mm Tube Exhaust Connector () ø8mm Flat (ibbon) Cable Intake port ø5/16 Connector 1() ø3/8 ush-in Fitting ø1/ Exhaust port (Straight / Elbow) ø8mm 5/3() ømm ømm Type efer to the pages below ort Fitting Type Tube O.D. Sub-D connector ø1/4 Output port Intake & Exhaust lock ush-in Fitting ø5/16 on One Side Individual lug-in 4() (Straight / Elbow) ø6mm () Open-air Exhaust Connector ø8mm Flat (ibbon) Cable Connector ø5/16 ø3/8 Intake port ush-in Fitting ø1/ 1() (Straight / Elbow) ø8mm ømm ømm

16 SOLENOID VLVE Series Solenoid Valve 0 Series Sub-D Connector 0 Intake & Exhaust lock on oth Sides Tube Exhaust Model Code 0 - -D CD file name pin 47 9pin 5 5pin 6.5 9pin 48.5 Sub-D Connector 4() () ort LED 0.5 = n+41(n = # of stations) 16n+70 ush-lock Manual utton -3.5 Screw Hole for -M4 1() ort Unit:mm /5() ort 0 Intake & Exhaust lock on One Side Tube Exhaust CD Model Code file name 0 - -D pin 47 9pin 5 5pin 6.5 9pin 48.5 Sub-D Connector 1() ort LED 0.5 =16 16n+5(n = # of stations) 16n+54 ush-lock Manual utton Screw Hole for -M () () ort /5() ort

17 0 Intake & Exhaust lock on oth Sides Open-air Exhaust Model Code 0 - S-D CD file name pin 47 9pin 5 5pin 6.5 9pin () () ort Sub-D Connector Exhaust Window LED 0.5 = n+41(n = # of stations) 16n+70 ush-lock Manual utton -3.5 Unit:mm Screw Hole for -M4 1() ort Intake & Exhaust lock on One Side Open-air Exhaust CD Model Code file name 0 - S-D pin 47 9pin 5 5pin 6.5 9pin () ort Sub-D Connector Exhaust Window LED 0.5 =16 16n+5(n = # of stations) 16n ush-lock Manual utton Screw Hole for -M4 4() () ort

18 SOLENOID VLVE Series Solenoid Valve 0 Series Individual lug-in Connector 0 Intake & Exhaust lock on oth Sides Tube Exhaust Model Code 0 - -S CD file name LED pprox. 500 Unit:mm Connector ush-lock Manual utton Screw Hole for -M () () ort 0.5 = n+41(n = # of stations) 16n+50 1() ort /5() ort 0 Intake & Exhaust lock on One Side Tube Exhaust CD Model Code file name 0 - -S LED pprox. 500 Connector ush-lock Manual utton Screw Hole for -M () ort 0.5 =16 16n+5(n = # of stations) 16n+34 4() () ort /5() ort

19 0 Intake & Exhaust lock on oth Sides Open-air Exhaust Model Code 0 - S-S CD file name LED pprox. 500 Unit:mm Connector ush-lock Manual utton Exhaust Window Screw Hole for -M () () ort 0.5 = n+41(n = # of stations) 16n+50 1() ort Intake & Exhaust lock on One Side Open-air Exhaust CD Model Code file name 0 - S-S Exhaust Window LED pprox. 500 Connector ush-lock Manual utton Screw Hole for -M () ort 0.5 =16 16n+5(n = # of stations) 16n+34 4() () ort

20 SOLENOID VLVE Series Solenoid Valve 0 Series Flat (ibbon) Cable Connector 0 Intake & Exhaust lock oth Sides Tube Exhaust Model Code CD file name 0 - -F Triangle Mark pin 54 pin 34 40pin 71 6pin 3 pin 43 40pin 6 4() () ort Flat (ibbon) Cable Connector (Conforming to MIL-C-83503) LED ush-lock Manual utton 0.5 = n+41(n = # of stations) 16n Screw Hole for -M4 1() ort Unit:mm /5() ort 0 Intake & Exhaust lock on One Side Tube Exhaust CD Model Code file name 0 - -F Triangle Mark pin 54 pin 34 40pin 71 6pin 3 pin 43 40pin 6 1() ort Flat (ibbon) Cable Connector (Conforming to MIL-C-83503) LED ush-lock Manual utton 0.5 = n+5(n = # of stations) 16n Screw Hole for -M4 4() () ort /5() ort

21 0 Intake & Exhaust lock on oth Sides Open-air Exhaust Model Code 0 - S-F CD file name Triangle Mark pin 54 pin 34 40pin 71 6pin 3 pin 43 40pin 6 4() () ort Flat (ibbon) Cable Connector (Conforming to MIL-C-83503) LED Exhaust Window ush-lock Manual utton 0.5 =16 16n+41(n = # of stations) 16n Unit:mm Screw Hole for -M4 1() ort Intake & Exhaust lock one One Side Open-air Exhaust CD Model Code file name 0 - S-F Triangle Mark pin 54 pin 34 40pin 71 6pin 3 pin 43 40pin 6 1() ort Flat (ibbon) Cable Connector (Conforming to MIL-C-83503) LED Exhaust Window ush-lock Manual utton 0.5 =16 16n+5(Screw Hole for -M4) 16n n = No. of stations 4() () ort

22 SOLENOID VLVE Series Solenoid Valve 0 Series Dimension of Fitting art Straight Type Elbow Type 4()ort ()ort 1()ort 3/5()ort Tube O.D. ød1 C1 L1 ød1 4() () ort C1 L1 L C ød 1() 3/5() ort Tube O.D. ød1 C Unit:mm L 6(1/4) (5/16) (5/16) (3/8) (1/) 4()ort ()ort 1()ort 3/5()ort ød ød1 C1 L3 C L4 L1 L Unit:mm Tube O.D. C1 C ød1 ød1 L1 L L3 L4 6(1/4) 8(5/16) 8(5/16) (3/8) (1/) DIN ail Mounting racket DF35S DIN ail Mounting racket Model Code DF35S CD file name Dimension with 0 Series mounted (78) 0.6(Max.) M3 0.5 (Screw Hole for Manifold-base) M4 0.7 (Screw Hole for 0 Manifold-base) M4 0.7 (Fixing Screw) M3 0.5 (Fixing Screw for racket)

23 Method for ttaching / Detaching DIN ail racket and DIN ail (1) Fix a solenoid valve on DIN ail racket (DF35S) by tightening a screw. (*1). *1 Use a screw with the designated size. Screw: M4x0.7 (L=6~64) () Mount DIN ail racket (DF35S) on DIN ail. Tighten the fixing screw of DIN ail racket (DF35S) with the designated tightening torque in the below table. Table. Tightening Torque of Fixing Screw Tightening Torque for Fixing Screw 0.3 ~ 0.4N m Max. Load 0N (3) Loosen the fixing screw of DF35S and lean forward the solenoid valve in the way like pulling it up, detach it from the rail as following figure shows. Screw for Manifold-block DIN ail DF35S Mounting Screw (1) () (3) Safety Instructions for DIN ail Mounting racket 1. Fixing shall be tightened within the designated tightening torque.. Do not place anything which exceeds the maximum load on DIN ail and racket. 3. Do not place DIN rail on a place with extreme vibration (9.8m/s or less).

24 SOLENOID VLVE Series Solenoid Valve 0 Series Detailed Safety Instructions efore using ISCO products, be sure to read Safety Instructions and Safety Instruction Manual and Common Safety Instructions for Solenoid Valve Series. Warning 1. When a solenoid valve is operated under viblation less than 5G, install it so that a spool valve is at a right angle to the vibrating direction. *efer to the figure of 4. Installation under recautions for Use. Caution 1. When the valves are used with Valve Manifold, back pressure can cause malfunctions of the actuator (single acting cylinder, etc.) In such a case, provide a check valve to the exhaust port.. Do not use a 3-position valve for accurate mid-stroke positioning of the cylinder. Compressiveness of air may not allow accuracy in stop position. lso, the valve permits leakage, so that the stop position may not remain constant for a long time 3. Do not give excessive tension or bending to the individual plug-in connector (Cable). Disconnection or damage to the connector may be caused. 4. The Cartridge Fitting can be disconnected by removing the lock pin. However, make sure that the lock pin is properly in place before using. 5. ead the manual carefully for proper installation and removal of valves. lso, keep the manual at hand. 6. ead the method for replacing Cartridge Fitting in the catalog carefully. 7. ead the method for replacing Cartridge Fitting and piping ø8mm Compression Fitting in the catalog carefully. Safety Instructions for Vacuum-Operateble /3-ort Solenoid Valve Connect () ort with air supply port and 4() ort with an actuator port. The reverse connection causes troubles. lace a filter to prevent foreign particles from etering inside. recautions for Dual ressure Option Triangle Mark indicates the partition to separate supply pressure. efer to the right figure. The intake air pressure of the partitioned right side including the traiangle marked-manifold block is suppled from, and that of the partitioned left side is supplied from 1. (In the right figure, St.1 to is 1 side, 1 and St.3 to 8 is on side.) ir partition border can not be change its position after shipment. Selectable Intake and Exhaust ort is only for Dual ressure option. St 1 St 3 St 5 St 7 St St 4 St 6 artition Wall osition (Triangle Mark) St8

25 Safety ules for Use 1. ir Quality Impurities contained in air may cause malfunctions or troubles of solenoid valves. emove drain and dust from the supply air. pply flushing to both supplying and cylinder sides when piping. lace a filter (filtering accuracy: 5μm or less) close to a solenoid valve. large amount of drain, excessive lubrication and super dry air may cause malfunctions or troubles. ay special attention to air quality.. Operating Environment Operate solenoid valves under the following environment. Within Operating Temp. ange void dew condensation by temperature change No water / oil drops and dust No corrosive gas 3. Leakage Current When a solenoid valve is operated by a programmable controller, leakage current in output side shall be less than 1m. There is a risk that the leakage current of the output can cause malfunctions. 4. Installation When a solenoid valve is operated under a vibrating condition, install it so that a spool valve is at a right angle to the vibrating direction. (Operate the valve under a vibration of less than 49m/s ) llowable No good Top View Side view 5. Lubrication No lubrication is necessary. When a system needs to be lubricated, use Turbine Oil Class 1 (ISO VG 3) / free of additives. If the lubrication is stopped supplying to the system in the middle of operation, malfunctions may be caused due to the loss of the initial lubricant on valves. Keep providing lubricant. 6. Method for ttaching / Detaching Solenoid Valve In order to attach or detach a valve unit on a Manifold-block, follow the instructions below. 1 Loosen the one fixing screw with a hilips screwdriver and take it out completely from the valve unit. (One screw clamping function) Fixing Screw hilips Screwdriver

26 SOLENOID VLVE Series Solenoid Valve 0 Series There is a concave niche on the back of the solenoid valve as figure 1 shows. Insert a flathead screwdriver into it and to pull up a solenoid valve as figure shows. Figure 1 Figure Solenoid Valve Flathead Screwdriver 3 To mount a solenoid valve on a manifold base, insert the valve toward the arrowed direction with attentions to the connection of a base connector and a fixing pin. Fixing screw ase connector Fixing pin Manifold side 4 Tighten a fixing screw with the tightening torque Nm. 7. Detachable Individual lug-in Connector Detachable Individual lug-in Connector The individual lug-in Connector is attached by inserting the connector into the socket.(figure 3) In order to detach the connector, push the latch to the arrowed direction in the figure below and pull out the connector. * Insert to a socket with the latch facing down. Valve Connector back side Latch White: side coil Connector ed: COM+V lack:

27 8. eplacement of Cartridge Fitting ll Fittings at connecting ports( port & ports) are deatchable. Follow the instructions below. 1 ull up a lock pin with a tool such as a flathead screwdriver and take it out. ull out Cartridge Fitting (ush-in Fitting or Compression Fitting) to the fitting taken-out direction. * When installing a cartridge fitting, make sure no dust or fluffs stuck on O-ring. 1Lock in Cartridge Fittings (ø1/4", 5/16", 6 and 8mm) 9. Manual Operation valve can be switched over by a manual operation only when pilot air is supplied. ush a manual button on the valve top with a precision driver until it stops. recision Driver -osition Single Solenoid Valve ush a button for a ort output and by releasing the button, ort output becomes available. -osition Double Solenoid Valve ush a button to hold an output of ort and by releasing the button, ort output becomes available. ort ort. eplacement of Silencer Element Follow the instructions below for the replacement of Silencer Element. 1 Take out 6 screws fixing an element cover. Take out the element (Model code: 0EX-E (pcs/set)) 3 Install a new element, set back the element cover and fix it by tightening the screws. (Tapping screws for resin are used for this product. Confirm the mesh with a precision driver first, then completely tighten all of them. ecommended tightening torque: Nm) Element Cover Element Tapping screw

28 SOLENOID VLVE Series Solenoid Valve 0 Series Construction Specification of 0 Series(Manifold type) with Sub-D Connector Double Solenoid Valve One Side Intake / Exhaust ort Single Solenoid Valve Fixing Screw for Manifold-base Open-air Exhaust Sub-D Connector Fixing Screw for Solenoid Valve oth Sides Intake with Silencer Exhaust ort lock Tube Exhaust Sub-D Connector oth Sides Intake with Tube Exhaust ort lock

29 Construction Specification of 0 Series (Manifold type) with Individual lug-in Connector Double Solenoid Valve Single Solenoid Valve One Side Intake / Exhaust ort Fixing Screw for Manifold-base Open-air Exhaust Individual Connector Fixing Screw for Solenoid Valve oth Sides Intake with Silencer Exhaust ort Tube Exhaust Individual Connector oth Sides Intake with Tube Exhaust ort

30 SOLENOID VLVE Series Solenoid Valve 0 Series Construction Specification of 0 Series (Manifold type) with Flat (ibbon) Cable Connector Double Solenoid Valve Single Solenoid Valve One Side Intake / Exhaust ort Fixing Screw for Manifold-base Open-air Exhaust Flat (ibbon) Cable Connector Fixing Screw for Solenoid Valve oth Sides Intake with Silencer Exhaust ort Tube Exhaust Flat (ibbon) Cable Connector oth Sides Intake with Tube Exhaust ort

31 elated roducts of 0 Series There are the following related products for 0 Series. (Sub-D Connector is only available for Wiring Type: Sub-D Connector. When Individual lug-in Connector is selected, Individual lug-in Connectors are accompanied by, but Flat (ibbon) Cable is Not accompanied. lease prepare a Flat (ibbon) Cable separately on your own. Sub-D Connector Enables Simple and space-saving wiring. DIN ail Mounting racket Suitable for 35mm width of DIN rail. Tube for pneumatic system Flexible olyurethane Tube and Nylon Tube with excellent resistance to pressure, abrasion and cold are suitable. (ø8 mm tube fittings on ort and are Compression Fittings special to olyurethane tubes.)

32 SOLENOID VLVE Series Caution 1. solenoid valve allows air leakage. Do not use the valve for applications which requires air tightness.. Do not use a solenoid valve for a large air-blow. drop of inner pressure can cause the internally pilotted-valve structure malfunctions. 3. When a solenoid valve is switched over by a manual operation, connected actuators start operation. Confirm the safety before the system is operated. 4. Make sure to turn off the power supply and wire colors before wiring. 5. Solenoid valves work without lubrication. When lubrication is necessary, use Turbine Oil Class 1 (ISO VG 3). If lubrication is stopped in the middle of the operation, it can cause malfunctions due to the loss of initial lubricant on valves. Keep providing lubricant. 6. Make sure each port by a marking on a solenoid valve body when piping. 7. Turn off the power and air supply and make sure the residual pressure becomes zero before maintenance. It should be noted that the residual pressure exists between a solenoid valve and an actuator in Three-osition Closed Center type. 8. Clogged element of a manifold with silencer increases the exhaust resistance. It can also cause impairing the performance in a whole pneumatic system. Carry out the maintenance periodically. 9. Thoroughly read and understand instructions and precautions in this catalog before replacing a silencer element.

3 Port Solenoid Valve

3 Port Solenoid Valve ubber Seal ort Solenoid Valve Series SYJ00/00/700 [Option] SYJ VQZ V VG Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced from size M1.7 to M.

More information

3 Port Solenoid Valve

3 Port Solenoid Valve Port Solenoid Valve Series V00 Rubber Seal Power consumption 0. W (with power saving circuit) VV0 VV00 V00 -V F VS temperature rises: C (with power saving circuit) Sonic conductance Series Standard Large

More information

Single sub-base valve

Single sub-base valve solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet

More information

0.35 0.9. 3 Port Solenoid Valve. Series VQZ100/200/300. Compact, High Flow. Power consumption: 0.35 W/0.9 W SYJ VQZ VP VG VP3

0.35 0.9. 3 Port Solenoid Valve. Series VQZ100/200/300. Compact, High Flow. Power consumption: 0.35 W/0.9 W SYJ VQZ VP VG VP3 Port Solenoid Valve 00/00/00 Metal Seal Rubber Seal 0. 0.9 (Standard) (High pressure type, High speed response type) Power consumption: 0. W/0.9 W Compact, High Flow Body ported Base mounted 00 00 00 00

More information

5.0 MPa Pilot Operated 2/3 Port Solenoid Valve & Check Valve

5.0 MPa Pilot Operated 2/3 Port Solenoid Valve & Check Valve 5.0 Ma ilot Operated /3 ort Solenoid Valve & Check Valve Series VCH VCH4/4: ort VCH40: 3 ort VCHC40: Check Valve ilot Operated ort Solenoid Valve [Option] Series VCH40 Stable responsiveness Response time

More information

Unit 24: Applications of Pneumatics and Hydraulics

Unit 24: Applications of Pneumatics and Hydraulics Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 4 DIRECTIONAL CONTROL VALVES The material needed for outcome 2 is very extensive

More information

Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)

Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,

More information

Electro-Pneumatic Bus Door Control Mechanism

Electro-Pneumatic Bus Door Control Mechanism Electro-Pneumatic Bus Door Control Mechanism Application and Feature 1. Pneumatic Door Mechanism actuates the open/close movements of bus door through two double acting cylinders and two linkages with

More information

Inrush Apparent power (VA) Flow Characteristics/Weight. Port size Rc. Valve model VS3115-01 VS3115-02 VS3110-02 VS3110-03 VS3114-00.

Inrush Apparent power (VA) Flow Characteristics/Weight. Port size Rc. Valve model VS3115-01 VS3115-02 VS3110-02 VS3110-03 VS3114-00. Port Direct Operated Solenoid Valve Series VS5/0 Metal Seal Multiple pressure supply is possible with balanced spool sleeve. Any given port can accept high or low pressure supply without affecting the

More information

4/2-Way Pneumatic Solenoid Valve

4/2-Way Pneumatic Solenoid Valve 4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug

More information

Specifications. Model Flow type Pressure type. Air Maximum operating pressure. 1.0 MPa Ambient and fluid temperature. 3% F.S.

Specifications. Model Flow type Pressure type. Air Maximum operating pressure. 1.0 MPa Ambient and fluid temperature. 3% F.S. Electro-Pneumatic Proportional Valve Series /VEP Electro-pneumatic proportional valve: Flow type () Controls the flow rate steplessly according to current. (It is a / port valve that has an electrical

More information

Electro-pneumatic control valves

Electro-pneumatic control valves Electropneumatic control valves 7 Miniature solenoid valves for alternating current Conform to the Low Voltage Directive or mounting on subbase or footprint in accordance with CNOMO recoendation E 066120N

More information

Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv)

Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Order code Series and function M-05-310-HN-442 Standard coil HN at ports 2 + 4 HN at ports

More information

3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223

3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223 3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223 HERION S HIGH PERFORMANCE POPPET VALVES For those applications requiring high Cv, fast response times, large

More information

Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points

Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points Features SELV Compliant No Detection Passive Injector Gigabit Compatible Full Protection

More information

Standard Specifications Model. How to Order. Mist spray unit. Recommended Equipment. Mixing valve

Standard Specifications Model. How to Order. Mist spray unit. Recommended Equipment. Mixing valve Mist Spray Unit Series MU/ Intermittent spray to cutting and press gear chains, etc. Standard Specifications MU MU Inlet air Oil tank set range. MPa. to. MPa Oil tank capacity (cm ) Total capacity: Effective

More information

Series M Applicable Tubing: ø2 Connection Thread: M3, M5

Series M Applicable Tubing: ø2 Connection Thread: M3, M5 iniature Fittings Series pplicable Tubing: ø2 onnection Thread:, RoHS ade to Order (Refer to page for details.) pplicable O.D. x I.D.: ø2 x ø.2 onnection thread: / One-touch fitting size: ø.2 / ø Tubing

More information

Assisted lift operated 2/2-way solenoid valves Type EV250B

Assisted lift operated 2/2-way solenoid valves Type EV250B MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way

More information

Control- and feedback head for integrated mounting on Robolux valves Type 2036

Control- and feedback head for integrated mounting on Robolux valves Type 2036 Control- and feedback head for integrated mounting on Robolux valves Type 203 Type 885 Type 88 can be combined with Compact stainless steel design Contactless valve position registration Coloured illuminated

More information

33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application

33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application 33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application Features Compliant with the IEEE802.3at Standard -40 to +60 C Temperature Range Diagnostic LEDs Full Protection

More information

3/2- and 2/2-way cartridge valve type BVE

3/2- and 2/2-way cartridge valve type BVE 3/2- and 2/2-way cartridge valve type BVE for any flow direction, zero leakage, all ports pressure resistant Flow Q max = 70 lpm Perm. pressure p max = 400 bar Additional valves with same function: ' Type

More information

Proportional pressure regulators VPPE

Proportional pressure regulators VPPE Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/

More information

Precision Regulator. Series IR1000/2000/3000 ARJ AMR ARM ARP IR IRV VEX1 SRH SRP SRF ARX20 VCHR ITV IC PVQ VER VEA VY2 AP100.

Precision Regulator. Series IR1000/2000/3000 ARJ AMR ARM ARP IR IRV VEX1 SRH SRP SRF ARX20 VCHR ITV IC PVQ VER VEA VY2 AP100. Precision Regulator Series // Basic Type Air Operated Type Series Model Regulating pressure range Page Series Series Series Series Series.5 to MPa. to MPa. to.8 MPa /8 55.5 to MPa. to MPa /4 55. to.8 MPa.

More information

5 Port Solenoid Valve

5 Port Solenoid Valve Metal Seal ort Solenoid Valve Series VQ7-6/7-8 Rubber Seal ISO Standard Size /Size VQ7-8/Single unit.6 VQ7-8/Manifold. Conforms to ISO standard /I Interface conforms to ISO standard Size (VQ7-6) and Size

More information

% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power

% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4 to 1 NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power .55 W Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NPT / 3/ / 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and.55 W low wattage coil Standard

More information

5 Port Pilot Operated Solenoid Valve Rubber Seal. Specifications Fluid Operating pressure range. 2 position single/3 position 2 position double

5 Port Pilot Operated Solenoid Valve Rubber Seal. Specifications Fluid Operating pressure range. 2 position single/3 position 2 position double For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Rubber Seal Series VF3000 Compact and lightweight: 26.4 mm

More information

SOLENOID VALVES 3-4 WAY

SOLENOID VALVES 3-4 WAY SOLENOID VLVES - WY IE/C// CT: FP/VCR Page: 7 SHEET: / SOLENOID VLVES - - WY CV SOLENOID VLVES -WY/-POSITION /- UNF.7 5.7 The electric valve is a -way -position directional electrically controlled Slight

More information

UM/22000 5/2 & 5/3 valves, solenoid and pilot actuated ISO 5599-1, ISO size 1, 2, 3 & 4 Sub-base mounted

UM/22000 5/2 & 5/3 valves, solenoid and pilot actuated ISO 5599-1, ISO size 1, 2, 3 & 4 Sub-base mounted U/ / & / valves, solenoid and pilot actuated ISO 99-, ISO size,, & Sub-base mounted Steel reinforced main seals 6 bar and bar NOO solenoid pilots with locking or non-locking manual override Low power coils

More information

Fluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.

Fluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03. Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power

More information

Solenoid Valve Type 3962

Solenoid Valve Type 3962 Solenoid Valve Type 362 x d, x em or without explosion protection, for controlling pneumatic actuators General The Type 362 Solenoid Valve ensures a high level of operational reliability for controlling

More information

Direct Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40

Direct Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40 Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane

More information

97300 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve

97300 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve 9700 NAMUR series, / & / > > Port size: G/, / NPT, NAMUR Interface > > Crossover-free switching > > Main application: Single and double acting actuators > > / way valve usable as / way valve > > Manual

More information

type V46, solenoid or pneumatic operated

type V46, solenoid or pneumatic operated SPECIFICATION general type of construction spool valve operator solenoid or pneumatic operated or by manual override. Manual override is equipped with a monostable function (push) and a bistable function

More information

VP23, 3-way proportional pressure control valves Seat valve with μp-driven pressure control

VP23, 3-way proportional pressure control valves Seat valve with μp-driven pressure control VP, -way proportional pressure control valves > > Port size: G/... G/ > > All-digital control electronics > > Variable pressure control > > Optional actuation via fieldbus (separate datasheet on request)

More information

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics 3/2-, 5/2-5/3-way Solenoid Valves for process pneumatics Type 6518 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 6518/6519 can be combined with... Stard-,

More information

Cooling system components, removing and installing

Cooling system components, removing and installing Engine BHW Cooling system components, removing and installing Page 1 / 24 19-1 Cooling system components, removing and installing Warning! When doing any repair work, especially in the engine compartment,

More information

No. : EX##-OMF0004 OPERATION MANUAL. SI unit EX12#-SMB1

No. : EX##-OMF0004 OPERATION MANUAL. SI unit EX12#-SMB1 No. : EX##-OMF0004 OPERATION MANUAL EX12#-SMB1 Contents 1. Safety instructions ------------------------------------------------------ P3 2. Notes ------------------------------------------------------

More information

UM/22000 5/2 or 5/3 Solenoid and air pilot actuated soft spool valves

UM/22000 5/2 or 5/3 Solenoid and air pilot actuated soft spool valves U/ / or / > > Sub-base mounted, 99- s,, or > > Steel reinforced main seals > > Low power coils (,W) > > Wide range of sub-bases and accessories > > 6 bar and bar NOO solenoid pilots with locking or non-locking

More information

Wear Resistant Tubing

Wear Resistant Tubing Wear Resistant Tubing 1/ brasion: pprox. (Compared with SMC polyurethane tubing TU series) 3 6-color variations Description Wear resistant tubing TUZ series Polyurethane tubing TU series Green RoHS Maximum

More information

4 Posiflow Proportional Solenoid Valves

4 Posiflow Proportional Solenoid Valves 4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,

More information

Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47)

Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47) 47 Brakes - Hydraulic Components (Page GR-47) FS III front brake calipers, servicing Front brake caliper piston, removing and installing FN 3 front brake calipers, servicing Front caliper piston, removing

More information

TS93 EMR T/PT/TDE. Surface applied door closer

TS93 EMR T/PT/TDE. Surface applied door closer TS EMR T/PT/TDE Surface applied door closer Installation instructions: Pull side track mount door closer with smoke detector (EMR T) Push side track mount door closer with smoke detector (EMR PT) Double

More information

Sensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm

Sensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm Specifications Features Type REED HALL EFFECT NPN or PNP Applicable Series Configurations Construction Materials Body Mounting Bracket Cable Characteristics Operating Temperature Accuracy All Cylinders

More information

Directional Control Valves

Directional Control Valves echnical Information General he D1VW Series directional control valves are highperformance, 4-chamber, direct operated, wet armature solenoid controlled, 3 or 4-way valves. hey are available in 2 or 3-position

More information

3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve

3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve 3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for

More information

DANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information

DANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information Safety Safety Is Your Responsibility DANGER To avoid personal injury or death, carefully read and understand all instructions pertaining to the Anthony Liftgates product. Do not attempt to install, operate,

More information

Series VM. Mechanical Valves VM200. VM1000 Side ported 11 x 36 x 16 Bottom ported 11 x 28 x 25

Series VM. Mechanical Valves VM200. VM1000 Side ported 11 x 36 x 16 Bottom ported 11 x 28 x 25 Mechanical Valves Series VM Model Dimensions (mm) VM1000 Side ported 11 x 36 x 16 Bottom ported 11 x 28 x 25 VM100 Side ported 17 x 44 x 25 Bottom ported 17 x 44 x 30 VM200 25 x 40 x 52 One way roller

More information

2/2 and 3/2 Way Size 6 Seat Valves

2/2 and 3/2 Way Size 6 Seat Valves 2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08

More information

Adjustment functions for both span and shift have been incorporated

Adjustment functions for both span and shift have been incorporated SENSORS FOR SERIES LED Type Wafer Alignment Sensor FX-0-F FT-F9 FD-F7 EX-F70/F60 M SH-7 FD-L4 M-DW The use of a safe LED light beam now allows for high precision detection with a resolution of 0!m (.8

More information

RPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007

RPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007 Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid

More information

NAMUR Mount Hygienic Valve

NAMUR Mount Hygienic Valve NF097-D NMUR Mount Hygienic Valve For Wash Down pplications Series VFN Features Engineered Plastic PPS Body (Polyphenylene Sulfide) provides high temperature and chemical/corrosion resistance for use in

More information

3/2-way pneumatic cartridge solenoid valve

3/2-way pneumatic cartridge solenoid valve 3/2-way pneumatic cartridge solenoid valve Compact design with 11 mm width per station Orifices from 0.5 mm (9 bar) to 1.2 mm (1.5 bar) High durability and reliability Low power consumption, as well as

More information

G1/4 Q8. Standard with biased position

G1/4 Q8. Standard with biased position Contents Version Actuation Page Characteristics Dimensions x / Way Valves pneumatic 6,7, 0 9 electric 6,7 9, 9 / Way Valves pneumatic 6,7, 0 electric 6,7, 0 / Way Valves pneumatic 6,7,, 6, 7 electric 6,7,,

More information

2/8.10.01. These vacuum switches are used in measuring ranges between -1 and 0 bar.

2/8.10.01. These vacuum switches are used in measuring ranges between -1 and 0 bar. CATALOGUE > Release 8.5 > Electronic vacuum switches Series SWM Electronic miniature vacuum switches Series SWM These vacuum switches are used in measuring ranges between -1 and 0 bar. Small dimension

More information

On-off valves MS-EM/EE, MS series, NPT

On-off valves MS-EM/EE, MS series, NPT On-off valves MS-EM/EE, MS series, NPT On-off valves MS9-EM, MS series, NPT Peripherals overview 5 3 4 aa -H- Note Additional accessories: Module connector for combinations with size MS6, MS9 or size MS12

More information

2 position single. (Standard) 100V AC 50/60Hz 200V AC 50/60Hz 24V DC. 2 position double

2 position single. (Standard) 100V AC 50/60Hz 200V AC 50/60Hz 24V DC. 2 position double 4/ Port Solenoid Valve Rubber Seal VZ1000/000/000 Solenoid Valve Variations Port Size Effective area (mm 2 ) Position solenoid Voltage Electrical entry Option/ Indicator light and surge voltage suppressor

More information

3/2 Solenoid Cartridge Valve, Size 6

3/2 Solenoid Cartridge Valve, Size 6 / Solenoid Cartridge Valve, Size 6 Q max = l/min, p max = 5 bar Bidirectional seat-valve shut-off, direct acting Guided valve spool and poppet Two spool variants are available Available in two mounting

More information

Split-type Air-Conditioner INSTALLATION MANUAL CONTENTS FOR INSTALLER MXZ-3A30NA MXZ-4A36NA ATTENTION. English. Français. Español

Split-type Air-Conditioner INSTALLATION MANUAL CONTENTS FOR INSTALLER MXZ-3A30NA MXZ-4A36NA ATTENTION. English. Français. Español Split-type Air-Conditioner MXZ-3A30NA MXZ-4A36NA INSTALLATION MANUAL Refer to the installation manual of each indoor unit for indoor unit installation. English Français Español ATTENTION This manual mentions

More information

Rear wheel brakes, servicing. Стр. 1 из 45. Note:

Rear wheel brakes, servicing. Стр. 1 из 45. Note: Volkswagen Touareg - Rear wheel brakes, servicing Стр. 1 из 45 46-2 Rear wheel brakes, servicing Rear brakes, FN 44 brake caliper, servicing Note: After replacing brake pads, depress brake pedal firmly

More information

Cooling system components, removing and installing

Cooling system components, removing and installing Page 1 of 34 19-1 Cooling system components, removing and installing WARNING! The cooling system is pressurized when the engine is warm. When opening the expansion tank, wear gloves and other appropriate

More information

3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow

3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow 1/6 RE 18309-3/06.10 Replaces: RE 18309-3/04.10 3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z Description The flow control

More information

3/2-way Mini Solenoid Valve

3/2-way Mini Solenoid Valve 3/2way Mini Solenoid Valve Directacting 0... bar DN mm... DN mm,,, subbase, banjobolt connection 21mm coil spacing when mounted on manifold Type can be combined with... Type 20 Type 207 Type able plug

More information

3/2-way Solenoid Valve, direct-acting, NC or NO

3/2-way Solenoid Valve, direct-acting, NC or NO 3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined

More information

PA5. Series. Quick-Connect Cables with Connectors. Simplifies sensor wiring. Wide variety of connectors attached to cables.

PA5. Series. Quick-Connect Cables with Connectors. Simplifies sensor wiring. Wide variety of connectors attached to cables. Quick-Connect Cables with Connectors PA Simplifies sensor wiring. Wide variety of connectors attached to cables. Series No wiring or staking work needed Shorter replacement time in unlikely event of sensor

More information

DIAMOND Retractable Rodding Robot Model SPRAYROD-R

DIAMOND Retractable Rodding Robot Model SPRAYROD-R 2004-12-21 2 1 (23) DIAMOND Retractable Rodding Robot Model SPRAYROD-R 2004-12-21 2 2 (23) Table of contents 1 TECHNICAL DESCRIPTION...4 1.1 MAIN DETAILS...5 1.2 COMPONENTS DESCRIPTION...5 1.2.1 Pneumatic

More information

Round Housing with Side Ports

Round Housing with Side Ports Power Steering Steering Control Unit (SCU) Parts and Repair Information 5 Series Steering Control Units 001 Square Housing with Side Ports Round Housing with Side Ports T E L RP Round Housing with End

More information

5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported. Flow characteristics 1 4/2 (P A/B) 4/2 5/3 (A/B R1/R2)

5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported. Flow characteristics 1 4/2 (P A/B) 4/2 5/3 (A/B R1/R2) For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Metal Seal, Body Ported Model position position Type of actuation

More information

Electro-hydraulic pressure switches type DG

Electro-hydraulic pressure switches type DG Electro-hydraulic pressure switches type DG Pressure p max = 700 bar See also: For electronic pressure switches type DG 5 E see D 5440 E Analogous pressure transducer type DT 1 see D 5440 T Analogous pressure

More information

STC 3S012-020-A Series Solenoid Valves

STC 3S012-020-A Series Solenoid Valves STC 3S012-020-A Series Solenoid Valves 3S012-020-A Series Solenoid Valve Specifications Valve Model 3S012-1/8-A 3S012-1/4-A 3S020-1/8-A 3S020-1/4-A Port Size (NPT) 1/8 1/4 1/8 1/4 Valve Type Action 3 Way,

More information

Cartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm)

Cartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm) Vickers Cartridge Valves Solenoid Valves Screw-in Cartridge Valves Maximum Pressure bar ( psi) Maximum Flow 7 l/min (6 USgpm) Rev /99 77 Introduction For over seventy years, Vickers has provided its customers

More information

LCD Readout Digital Pressure Switch

LCD Readout Digital Pressure Switch LCD Readout Digital Pressure Switch Series ZSE3 (For )/E3 (For Positive Pressure) For General Pneumatics Easy pressure setting with the digital display RoHS Can be integrated with a vacuum unit, Series

More information

Doc.No. NDP 192U-02. Electric Pump Controller CE-124P. Instruction Manual

Doc.No. NDP 192U-02. Electric Pump Controller CE-124P. Instruction Manual Doc.No. NDP 192U-02 Electric Pump Controller CE-124P Instruction Manual 1. Parts Name and Function 1) POWER LED Indicate that CE-124P is powered up. 2) START/STOP KEY (SELECTOR KEY) Used to start and stop

More information

size 3 15 4200 size 4 19 6600

size 3 15 4200 size 4 19 6600 BE/BE ISO 99/ Valves - Compliance with ISO 99/ international standards - Full range: - - - size - Two different internal commutation system: mixed and spool, appreciated for decades thanks to their maximum

More information

SunMaxx Solar Filling Station Operating Instructions

SunMaxx Solar Filling Station Operating Instructions SunMaxx Solar Filling Operating Instructions Content 1. Declaration of conformity... 2 2. Introduction... 2 3. Transportation and unpacking... 4 4. Mounting and commissioning... 5 5. End of operation...

More information

M A N U A L 13-10-05

M A N U A L 13-10-05 Documentation The following information sheets illustrate the description below: 12-WW01-4G-E Sectional view of the lance with main dimensions 12-W101-6G-E Sectional view of the head of the lance with

More information

Installation Instructions 4508 4508S

Installation Instructions 4508 4508S SYMPHONY Spread Lavatory Faucet with Speed Connect Drain Congratulations on purchasing your American Standard faucet with Speed Connect drain, a feature found only on American Standard faucets. Speed Connect

More information

3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve

3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve 3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for

More information

Directional seated valves type VP 1

Directional seated valves type VP 1 Directional seated valves type VP 1 zero leakage, intended for general hydraulic applications and grease lubing systems Flow Q max Operation pressure p max = 15 lpm = 400 bar Individual valve Individual

More information

EM 58. 19. REMOVE NO. 2 MANIFOLD STAY (a) Remove the bolt, nut and stay.

EM 58. 19. REMOVE NO. 2 MANIFOLD STAY (a) Remove the bolt, nut and stay. 57 ROVAL 1. DISCHARGE FUEL SYST PRESSURE (See page FU-9) 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery

More information

Solenoid Operated Directional Valves

Solenoid Operated Directional Valves INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS SERIES 35 Solenoid Operated Directional Valves SF-2C-115A-35 S-1AY-12D-35 SD-2C-12D-35 Features High Flow/ High Pressure: Up to 40 gpm / 5000 psi working pressure*.

More information

Oil Pressure Regulating Valve

Oil Pressure Regulating Valve Oil ressure Regulating Valve In adopting and using this product. Safety recautions ype Number Index 2 3 4 Directional control valve - ressure control valve 2- Flow control valve 3- Sandwich valve 4- Logic

More information

IMPORTANT DOCUMENTATION DO NOT DISCARD!

IMPORTANT DOCUMENTATION DO NOT DISCARD! PART NO.: 6441-263C SERIES GRT 3 JAW PARALLEL GRIPPERS INFORMATION SHEET IMPORTANT DOCUMENTATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance

More information

CONNECTOR AMPLIFIER FOR PROPORTIONAL VALVES (4-20 ma Input Version)

CONNECTOR AMPLIFIER FOR PROPORTIONAL VALVES (4-20 ma Input Version) TECHNICAL DATASHEET #TD1102AX CONNECTOR AMPLIFIER FOR PROPORTIONAL VALVES (4-20 ma Input Version) Part Number: Connector Amplifier CAPV-H-4-20MA-x complete with cable CAPV-4C-yM Where: x = current output

More information

How To Read A Pipe From A Sensor

How To Read A Pipe From A Sensor Liquid Level Sensor Installation on pipes. Sensing by means electrostatic capacity and is not influenced by the color of the pipe or liquid. Available in 8 to mm dia. and to mm dia. models to enable sensing

More information

KA/8000/M, KA/8000, ISO cylinder (Stainless steel) Magnetic & Non-magnetic piston, double acting

KA/8000/M, KA/8000, ISO cylinder (Stainless steel) Magnetic & Non-magnetic piston, double acting K/8000/M, K/8000, ISO cylinder (Stainless steel) > > Ø 3... 00 mm > > High corrosion and acid resistance > > Ideal for applications in the food industry > > Conforms to DIN ISO 555, DIN ISO 63, VDM 56

More information

Solenoid Operated Directional Valves

Solenoid Operated Directional Valves INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS SERIES 35 Solenoid Operated Directional Valves SD-2B-115A-35 SDS-2H-12D-35 S-2B-115A-35 Features High Flow/ High Pressure: Up to 25 gpm / 5000 psi working

More information

Proportional relief valves type AGMZO-TERS, AERS two stage, with integral or remote pressure transducer, ISO 6264 size 10, 20 and 32

Proportional relief valves type AGMZO-TERS, AERS two stage, with integral or remote pressure transducer, ISO 6264 size 10, 20 and 32 www.atos.com Table F040-1/E Proportional relief valves type AGMZO-TERS, AERS two stage, with integral or remote pressure transducer, ISO 6264 size 10, 20 and 32 AGMZO are two stage poppet type proportional

More information

Cable Plug acc. to DIN EN 175301-803, Form A

Cable Plug acc. to DIN EN 175301-803, Form A Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with

More information

Table of Contents - Tubing

Table of Contents - Tubing Table of Contents - Tubing Tubing Page TU- to 22 TIA Nylon Tubing Inch... TU- T Nylon Tubing Metric... TU-2 TISA Soft Nylon Tubing Inch... TU-3 TS Soft Nylon Tubing Metric... TU- TIU Polyurethane Tubing

More information

APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS. This work covers part of outcome 2 of the standard Edexcel module.

APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS. This work covers part of outcome 2 of the standard Edexcel module. APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS This work covers part of outcome 2 of the standard Edexcel module. The material needed for outcome 2 is very extensive so

More information

005 SERIES MODULAR VALVES. Pub. EC-1401. General Information Up to 25 MPa (3630 PSI), 10 L /m in (2.6 U.S.GPM) Modular Valve Type

005 SERIES MODULAR VALVES. Pub. EC-1401. General Information Up to 25 MPa (3630 PSI), 10 L /m in (2.6 U.S.GPM) Modular Valve Type 5 SERIES General Information Up to 5 Ma (3 SI), 1 L /m in (6 USGM) ub EC-11 MODULR VLVES hese modular valves have the same mounting surface as those for the DSG-5 solenoid operated directional valves and

More information

Multi-talented. Valve and valve terminal series VG

Multi-talented. Valve and valve terminal series VG Valve and valve terminal series VG Multi-talented. Highlights VUVG Compact with high flow rate Can be expanded to form a valve terminal with an individual connection 2x 3/2 one valve, two functions Simple

More information

Check Valves. Pilot Operated Check Valves. Vickers. PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series. Typical Section. Features and Benefits

Check Valves. Pilot Operated Check Valves. Vickers. PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series. Typical Section. Features and Benefits Vickers Check Valves Pilot Operated Check Valves PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series Typical Section Typical PCG5V model with internally drained pilot piston internal leakage through the closed pilot

More information

Valve systems Base plates, according to standard ISO 5599-1. Brochure

Valve systems Base plates, according to standard ISO 5599-1. Brochure ISO 5599-1 Brochure 2 ISO 5599-1 Single subbase Single subbase, thread connections on the side standard: ISO 5599-1 Frame size: ISO 1 - ISO 4 compressed air connection output: G 1/4 - G 1 Reversed pressure

More information

zamak nitrile rubber self-extinguishing technopolymes aluminum

zamak nitrile rubber self-extinguishing technopolymes aluminum G 0 mm - G / Valves and solenoid valves - G/ threaded valve body with traditional Univer spool system - Version with integrated connection and esternal connection - Compact design - High flow rate - Versions

More information

TraceTek TTDM Series Leak Detection and Location Modules Replacement Parts Installation Instructions

TraceTek TTDM Series Leak Detection and Location Modules Replacement Parts Installation Instructions TraceTek TTDM Series Leak Detection and Location Modules Replacement Parts Installation Instructions TRACETEK TraceTek TTDM Replacement Parts General Information These instructions detail the steps to

More information

SELECTION, APPLICATION AND MAINTENANCE

SELECTION, APPLICATION AND MAINTENANCE DIESEL PROTECTION SYSTEMS Automatic Diesel Engine Shut Down System for Safe Area Applications SELECTION, APPLICATION AND MAINTENANCE Series 300 Series 310 SYSTEM DESCRIPTION Suitable for attended engine

More information

ISO 15407-1/2 (VDMA 24563) ISO 02 (18 mm) - ISO 01 (26 mm) Valves

ISO 15407-1/2 (VDMA 24563) ISO 02 (18 mm) - ISO 01 (26 mm) Valves BD ISO 0/ (VDM ) ISO 0 ( mm) ISO 0 ( mm) Valves BDE = solenoid valves ISO 0/ with integrated connection including V DC coils and connector BDB = solenoid valves ISO 0/ with external connection with M connector

More information

5-port / 8-port 10/100BaseTX Industrial Ethernet Switch User Manual

5-port / 8-port 10/100BaseTX Industrial Ethernet Switch User Manual 5-port / 8-port 10/100BaseTX Industrial Ethernet Switch User Manual Content Overview... 1 Introduction... 1 Features... 3 Packing List... 4 Safety Precaution... 4 Hardware Description... 5 Front Panel...

More information

zamak nitrile rubber self-extinguishing technopolymer aluminum

zamak nitrile rubber self-extinguishing technopolymer aluminum PS COMBOBOX valves - Valves with compact design: valve body with integrated sub-base - High flexibility: > possibility of choosing fitting dimension (--) according to users needs > manifolds from up to

More information