DD-402 E-Drum Set. Users manual

Transcription

1 DD402 EDrum Set Users manual Version 2/202

2 THE FCC REGULATIN WARNING (for USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. Unauthorized changes or modification to this system can void the user s authority to operate this equipment. CAUTIN The normal function of the product may be disturbed by Strong Electro Magnetic Interference. If so, simply reset the product to resume normal operation by following the owner s manual. In case the function could not resume, please use the product in other location. CAUTIN Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. PRECAUTINS PLEASE READ CAREFULLY BEFRE PRCEEDING Please keep this manual in a safe place for future reference. Power Supply Please connect the designated AC adaptor to an AC outlet of the correct voltage. Do not connect it to an AC outlet of voltage other than that for which your instrument is intended. Unplug the AC power adaptor when not using the instrument, or during electrical storms. Connections Before connecting the instrument to other devices, turn off the power to all units. This will help prevent malfunction and / or damage to other devices. Location Do not expose the instrument to the following conditions to avoid deformation, discoloration, or more serious damage: Direct sunlight Extreme temperature or humidity Excessive dusty or dirty location Strong vibrations or shocks Close to magnetic fields Interference with other electrical devices Radios and televisions placed nearby may experience reception interference. perate this unit at a suitable distance from radios and televisions. Cleaning Clean only with a soft, dry cloth. Do not use paint thinners, solvents, cleaning fluids, or chemicalimpregnated wiping cloths. Handling Do not apply excessive force to the switches or controls. Do not let paper, metallic, or other objects into the instrument. If this happens, unplug the AC adaptor from the wall outlet. Then have the instrument inspected by qualified service personnel. Disconnect all cables before moving the instrument. 2

3 Panel Description Front Panel... 4 Rear Panel... 4 Setup Connect the pads and the pedal... Connections Connect an audio equipment... 6 Connect a CD player, etc.(aux in jack)... 6 Connect headphones... 6 Connect the power supply jack... 6 MIDI and USB... 6 MENU menu tree... 7 peration Switch the power N... 7 Set the main volume... 7 Pattern Select a pattern... 8 Adjust the accompaniment volume... 8 Adjust the drum volume... 8 Drum Kit Select a kit... 9 Adjust the kit volume... 9 Switch reverb on/off... 9 Voice Select the voice...0 Adjust the voice volume... 0 Adjust the midi note... Tempo Adjust the tempo... Click Adjust the click time signature... 2 Adjust the click interval... 2 Adjust the click instrument... 2 Adjust the click volume... 2 Restore the factory preset... 3 Play the demo... 3 Play the pattern... 3 Play the click... 3 Appendices Specifications... 4 Preset Drum Kit List... Drum Instrument List... Preset Pattern List... GM Backing Instrument List... 6 GM Drum Kit List... 8 MIDI Implementation Chart... 9

4 Panel Description Front Panel MASTER VLUME KNB Control the volume of phone and line out. Turn it clockwise to increase the volume and anticlockwise to decrease the volume. [START/STP] BUTTN Start or stop Pattern playing. 3DIGIT LED DISPLAY 3digit LED and LED indicators [CLICK] BUTTN Press [click] button to start/stop the click. Hold on the [click] button 2 seconds to enter the demo mode and play the demo. [MDE] BUTTN Press [mode] button to select the mode from PATTERN, KIT, VICE, CLICK. [PAGE] BUTTN Press [page] button to browse the menu pages of current selected mode. Press both [mode] and [page] buttons, the 3digit LED will display the tempo page, it will temporarily display for 3 seconds, then press [] or [] to adjust the volume. []/[] BUTTN Press []/[] button to adjust the parameters. Rear Panel PWER SUPPLY JACK ( DC IN 9V ) Connect an AC adaptor to this jack. PWER SWITCH Turn the power on/off. USB PRT Connect to computer. MIDI UT JACK Connect with external sound module. LINE UTPUT JACKS (R, L/MN) Made up of right channel output and left channel output which is also used as mono line output. AU IN Connect with external sound source. 4 PHNES JACK Connect a pair of stereo headphones to this jack. (Connect the headphones will not mute the output jack.)

5 Setup Caution! To prevent electric shock and damage to the device, make sure the power is switched FF on the drum and all related device before making any connection. Connecting Pads and Pedals Using the provided cables, the cable received by marking the corresponding drum pads, cymbal pads and pedals. (See the below illustration for reference) Note:. The voice of hihat pad hitting is controlled by hihat pedal. Similar to a real drum kit, the hihat pad functions as an 'open hihat' when the pedal is released. When the pedal is stepped, it functions as a 'closed hihat'. 2. The valid striking area of cymbal pad (ride, crash or hihat) is near the edge of the pad, which is different from other pads. Cymbal Pad Drum Pad To Crash To Ride To HiHat Drum Module To Tom To Snare To Tom 2 To Tom 3 2 To HiHat control HiHat Pedal To Kick Bass drum pedal

6 Connect an audio equipment.when you want to listen to the voices with an amplifier, connect amplifiers with the utput L/MN and R jacks on the rear panel. (For monaural playback, use the L/MN jack; for stereo playback, connect both L/MN and R jacks.) 2. The volume is adjusted with the VLUME knob. Amplifier Amplifier Connect a CD player, etc.(aux. In jack). The audio output of a CD player, or other audio source, to connect with the AU IN jack on the rear panel can be mixed with the sound of the drum. This function is convenient that let you play along with a favourite song. 2. The volume of the external signal is adjusted with the VLUME knob. Connect headphones An optional set of stereo headphones can be connected with the PHNES jack located on the rear panel of the drum module. * Adjust the volume to a comfortable level. Connect the power supply jack Make sure the power is switched FF and connect the power adaptor with the DC IN jack on the rear panel. Note:. To protect the speakers, amplifier and the drum module from damage, rotate the volume knob to the minimum volume level before switching the power N. 2. Make sure the power is switched FF when connecting drum module with external devices. MIDI and USB MIDI stands for Musical Instrument Digital Interface, this is a worldwide standard communication interface that enables electronic musical instruments and computers (of all brands) to communicate with each other so that MIDI command and other data can pass between them. This exchange of information makes it possible to create a system of MIDI instruments and devices that offer far greater versatility and control than is available with isolated instruments. Whether you interface with computers, sequencers, expanders or other controllers, your musical horizons will be greatly enhanced. MIDI connection MIDI UT: This terminal transmits data from this instrument to other MIDI devices. USB connection The USB connector allows you to connect the module directly to your computer. It can be connected without driver installation under the Windows P\ Vista\Windows 7& MAC S environment. The modulewill be recognized as 'USB Audio device' to receive and transmit MIDI messages through a single USB cable, USB is used only for MIDI messages(midi via USB). Note: When the USB is connected to a computer, all MIDI messages will be received and transmitted via USB. 6

7 Menu Menu tree PATTERN Number Acmp Volume Drum Volume KIT Number Volume Reverb VICE Number Volume MIDI note CLICK Time Signature Interval Click Instrument Volume In the main menu there are 4 menu items PATTERN DRUM KIT VICE CLICK peration Press [MDE] button to change the mode. Press [PAGE] button to select the page of current mode. Press [] / [] button to adjust the parameters. Switch the power N After confirming all connection have been completed, rotate the volume knob to the left ( minimum volume level) before switching the power on. VLUME N FF USB MIDI UT Set the power switch to "N" position to switch on the power. Display shows the kit s number and its indicator lights up. PATTERN KIT VICE CLICK Kit indicator Set the main volume While hitting a pad, gradually rotate the volume knob until a comfortable volume level is reached. VLUME 7

8 Pattern In pattern mode, there are 3 pages:.pattern number ( 40,default ) 2.Pattern accompaniment volume(032) 3.Pattern drum volume(032) Select a pattern In pattern mode, Pattern number (00040,default 00) PAGE.Press the [MDE] button to select the pattern mode, the pattern LED indicator will be lighted up, the 3digitLED will display the pattern number(00) 2. Press [] or [] button to adjust the value. Range :( 00 to 040) Pattern LED indicator PATTERN KIT VICE CLICK CLICK MDE PAGE TEMP Figure Pattern number Adjust the accompaniment volume In pattern mode, pattern accompaniment volume(0032). Press [MDE] button to select the pattern mode, the pattern LED indicator will be lighted up. PAGE 2 CLICK 2. Press [PAGE] button to select the accompaniment volume page, the 3digitLED will display the accompaniment volume(a22). 3. Press [] or [] button to adjust the value. Range:(0 to 32). Play a Song PATTERN KIT VICE CLICK Pattern LED indicator Figure Pattern accompaniment volume MDE PAGE TEMP Adjust the drum volume In pattern mode, pattern drum volume(0032). Press [MDE] button to select the pattern mode, the pattern LED indicator will be lighted up, 2. Press [PAGE] button to select the drum volume page, the 3digitLED will display the drum volume(d22). 3. Press [] or [] to adjust the value. Range:(0 to 32) PAGE 3 PATTERN KIT VICE CLICK Pattern LED indicator Figure Pattern drum volume CLICK MDE PAGE TEMP 8

9 Drum Kit In kit mode, there are 3 pages:. kit number(0000,default ). 2. kit volume (032). 3. kit reverb:(on/off, default on). Select a kit a kit In kit mode, kit number(0000,default ).. Press [MDE] button to select the kit mode, the kit LED indicator will be lighted up, the 3digitLED will display the kit number(00). 2. Press [ ] or [ ] to adjust the value. Range:(0000). Kit LED indicator PATTERN KIT VICE CLICK Figure PAGE Kit number Adjust the kit volume In kit mode, kit volume (032). PAGE 2. Press the [MDE] button to select the kit mode, the kit LED indicator will be lighted. CLICK MDE 2. Press the [PAGE] button to select the kit volume page, the 3digitLED will display the kit volume(l30). Kit LED indicator PATTERN KIT VICE CLICK PAGE TEMP 3.Press [] or [] to adjust the value (Automatic save). Range:(0 to 32). Figure Kit volume Switch reverb on/off. Press [MDE] button to select the kit mode, the kit LED indicator will be lighted up. 2. Press the [PAGE] button to select the kit reverb page, reverb effect can be turn on or off by pressing button [] or []. Kit LED indicator PATTERN KIT VICE CLICK PAGE 3 Kit LED indicator PATTERN KIT VICE CLICK 9

10 Voice In voice mode, there are 3pages:. Voice number:(08). 2. Voice volume:(032). 3. Midi note:(099). Select the voice In voice mode, voice number:(08).. Press [MDE] button to select the voice mode, the voice LED indicator will be lighted up, strike a drum pad, the 3digitLED will display the voice number. 2. Press [] or [] to adjust the value(automatic save). Range:(00 to 08). NTE: When you select a voice for hihit drum, you only can select the hihat group voices, from group group 4(Automatic save), the display is:(hi). PAGE Voice LED indicator PATTERN KIT VICE CLICK PATTERN KIT VICE CLICK Adjust the voice volume In voice mode, voice volume:(032). PAGE 2. Press [MDE] button to select the voice mode, the voice LED indicator will be lighted up. 2. Press [PAGE] button to select the voice volume page, strike a drum pad, the 3digitLED will display the voice volume(l30). PATTERN KIT VICE CLICK 3. Press [] or [] to adjust the value(automatic save). Range:(0 to 32). 0

11 Voice Adjust the midi note In voice mode, midi note:(099). PAGE 3. Press [MDE] button to select the voice mode, the voice LED indicator will be lighted up. 2. Press [PAGE] button to select the midi note page, strike a strike a drum pad, the 3digitLED will display the midi note (n48). 3.Press [] or [] to adjust the value(automatic save). Range:(0 to 99). PATTERN KIT VICE CLICK THE DEFAULT MIDI NTE: N NAME CRASH TM TM 2 TM 3 RIDE KICK SNARE HIHAT CLSE HIHAT PEN HIHAT PEDAL NTE Tempo The tempo range is Adjust the tempo.press both [MDE] and [ PAGE ] buttons, the 3digitLED will display the tempo page, it will temporarily display for 3 seconds. 2. Press [] or [] to adjust the value. CLICK MDE PATTERN KIT VICE CLICK PAGE TEMP

12 Click In click mode, there are 4 pages:.time signature:(/47/4,3/8,6/8). 2. Interval:(/4,/8,/2,/6,/24,default /4). 3. Instrument:(,default ). 4. Click volume:(032). Adjust the click time signature In click mode, Time signature:(/47/4,3/8,6/8). PAGE. Press [MDE] button select the click mode, the click LED indicator will be lighted up. 2. Press [PAGE] button select the click time signature page, the 3digitLED will display the click time signature(44). PATTERN KIT VICE CLICK 3. Press [] or [] to adjust the value. Range:(/47/4 or 3/8 or 6/8). Note: The click time signature will follow the pattern, when pattern is playing, it can not be edit. Adjust the click interval In click mode, interval:(/4,/8,/2,/6,/24,default /4). PAGE 2. Press [MDE] button to select the click mode, the click LED indicator will be lighted up. 2. Press [PAGE] button to select the click interval page, the 3digitLED will display the click interval (4). 3. Press the [] or [] button to adjust the value. Range:(4 to 24). PATTERN KIT VICE CLICK Adjust the click instrument In click mode, instrument:(,default ). PAGE 3. Press [MDE] button to select the click mode, the click LED indicator will be lighted up. 2. Press [PAGE] button to select the click instrument page, the 3digitLED will display the click instrument(cl). PATTERN KIT VICE CLICK 3. Press [] or [] to adjust the value. Range:(CL to CL). Adjust the click volume In click mode, click volume:(032). PAGE 4. Press [MDE] button to select the click mode, the click LED indicator will be lighted up. 2. Press [PAGE] button to select the click volume page, the 3digitLED will display the click volume(l24). PATTERN KIT VICE CLICK 2 3. Press [] or [] to adjust the value. Range:(0 to 32)

13 Restore the factory preset Restoring the factory preset can be implemented by following operations: Turn on the power with both [ ] and [ ] unreleased. This function will replace the current settings of following parameters by their default preset values: Kit volume, voice number, voice volume and MIDI note. Play the demo. Hold on the [CLICK] button 2 seconds to enter the demo and play the demo, the 3digitLED will display the demo de. 2. Press [START/STP] button to stop the demo playing. CLICK MDE DEM PATTERN KIT VICE CLICK PAGE TEMP Play the pattern. Press [START/STP] button play the pattern. 2. Press [ START/STP] button again to stop the pattern playing. Play the click. Press the [CLICK] button to start the click, the click indicator will flash follow the beat. 2. Press the [CLICK] button again to stop the click. 3

14 Specifications Drum Pad 4 drum pads, 3 cymbal pads, hihat control pedal, kick pedal Preset Drum kits 0 preset kits Drum Instrument 08 Preset Pattern 40 Controls MIDI UT, PWER SWITCH, USB, PHNES, START/STP,PATTERN, KIT, VICE, CLICK, MDE, PAGE, DEM, TEMP, VLUME, / Display LED display Connections PHNES AU IN UTPUT (R & L/MN) MIDI UT USB N/FF Power Supply AC adaptor ( 9V) 4

15 Preset Drum KIT list No. Name Acoustic Standard Rock Standard 2 Funk Jazz Brush Electronic 808 House Drum Instrument List No. Name No. Name No. Name No. Name No. Name KICK Standard Kick Standard Kick 2 Room Kick Rock Kick Rock Kick 2 Acoustic Kick HipHop Kick Funk Kick Jazz Kick Jazz Kick 2 Electronic Kick 808 Kick House Kick House Kick 2 SNARE Classic Snare Classic Snare Rim Classic Snare 2 Classic Snare Rim 2 Room Snare Room Snare 2 Acoustic Snare Acoustic Snare Rim Funk Band Snare Funk Band Snare Rim Camco Snare Camco Snare Rim Brush Snare Brush Snare Rim Electronic Snare Electronic Snare Snare House Snare House Snare 2 TM Classic Tom Classic Tom 2 Classic Tom 3 Classic Tom 4 Classic Tom Classic Tom 6 Camco Tom Camco Tom 2 Camco Tom 3 Preset Pattern List Tom Electronic Tom Electronic Tom 2 Electronic Tom 3 Electronic Tom 4 Electronic Tom Electronic Tom Camco Tom 4 Camco Tom Camco Tom Tom 808 Tom Tom Tom Tom RIDE Classic Ride Classic Ride Bell Rock Ride 808 Ride Standard Crash 2 Rock Crash Splash Splash 2 Brush Crash 808 Crash HIHAT Standard Hihat pen Jazz Hihat pen Electronic Hihat pen 808 Hihat pen Standard Hihat Close Jazz Hihat Close Electronic Hihat Close 808 Hihat Close Standard Hihat Pad Jazz Hihat Pad Electronic Hihat Pad 808 Hihat Pad CRASH PERCUSSTIN 062 Standard Crash 08 Bongo High 082 Bongo Low 083 Mute Conga Hihat 084 pen Conga Hihat 08 Conga Low 086 Timbale High 087 Timale Low 088 Agogo High 089 Agogo Low 090 Cabasa 09 Maracas 092 Short Whistle 093 Long Whistle Short Guiro Long Guiro Claves Wood Block High Wood Block Low Mute Cuica pen Cuica Mute Triangle pen Triangle Shaker Jingle Bell Belltree Castanets Mute Surdo pen Surdo No. Name Tempo Kit No. Name Tempo Kit Fusion Electronic & Funk Modern Pop HipHop Latin Jazz Funk Big Band Funk 2 Pop Funk Fusion 2 Funk 3 Fusion 3 Fusion 4 Pop Funk 2 R&B Drum & Bass Break Beat Dance Drum & Bass 2 Latin Dance Swing 022 Latin Jazz Big Band /4 Jazz 02 Jazz 026 6/8 Ballad 027 Pop Ballad 028 Pop Bossa 029 6Beat Pop 030 Pop Shuffle 03 Samba 032 Mambo 033 Latin Rock 034 Latin Pop 03 Guitar Bossa 036 Country Blues 037 Rock 038 Reggae s Rock 040 Blues Demo Funk

16 GM Backing Instrument List PIAN Acoustic Grand Piano 2 Bright Acoustic Piano Electric Grand Piano HonkyTonk Piano E.Piano E.Piano 2 Harpsichord Clavi MALLET 9 Celesta 0 Glockenspiel Music Box 2 Vibraphone 3 Marimba 4 ylophone Tubular Bells 6 Dulcimer RGAN 7 Drawbar rgan 8 Percussive rgan 9 Rock rgan 20 Church rgan 2 Reed rgan 22 Accordion 23 Harmonica 24 Tango Accordion STRINGS ENSEMBLE 49 Strings Ensemble 0 Strings Ensemble 2 Synth Strings 2 Synth Strings 2 3 Choir Aahs 4 Voice ohs Synth Voice 6 rchestra Hit BRASS 7 Trumpet 8 Trombone 9 Tuba 60 Muted Trumpet 6 French Horn 62 Brass Section 63 Synth Brass 64 Synth Brass 2 REED Soprano Sax Alto Sax Tenor Sax Baritone Sax boe English Horn Bassoon Clarinet EFFECTS 97 F (rain) 98 F2 (soundtrack) 99 F3 (crystal) 00 F4 (atmosphere) 0 F (brightness) 02 F6 (goblins) 03 F7 (echoes) 04 F8 (scifi) ETHNIC Sitar Banjo Shamisen Koto Kalimba Bagpipe Fiddle Shanai PERCUSSIVE 3 Tinkle Bell 4 Agogo Steel Drums 6 Wood Block 7 Taiko Drum 8 Melodic Tom 9 Synth Drum 20 Reverse Cymbal GUITAR 2 Nylon Guitar 26 Steel Guitar 27 Jazz Guitar 28 Clean Guitar 29 Muted Guitar 30 verdriven Guitar 3 Distortion Guitar 32 Guitar Harmonics BASS 33 Acoustic Bass 34 Finger Bass 3 Pick Bass 36 Fretless Bass 37 Slap Bass 38 Slap Bass 2 39 Synth Bass 40 Synth Bass 2 PIPE LEAD Piccolo Flute Recorder Pan Flute Blown Bottle Shakuhachi Whistle carina Lead (square) Lead2 (sawtooth) Lead3 (calliope) Lead4 (chiff) Lead (charang) Lead6 (voice) Lead7 (fifths) Lead8 (bass & Lead) SUND EFFECTS Guitar Fret Noise Breath Noise Seashore Bird Tweet Telephone Ring Helicopter Applause Gunshot STRINGS Violin Viola Cello Contrabass Tremolo Strings Pizzicato Strings rchestral Harp Timpani PAD Pad (newage) Pad2 (warm) Pad3 (Polysynth) Pad4 (choir) Pad (bowed) Pad6(metallic) Pad7 (halo) Pad8 (sweep) 6

17 GM Drum Kit List Click NET N. Standard (bank 0 ) Standard 2 (bank 4 ) Room (bank 8 ) Rock (bank 6 ) 27D# High Q 28E Slap 29F Scratch Push 30F# Scratch Pull 3G Sticks 32G# Square Click 33A Metronome Click 34A# Metronome Bell 3B Acoustic Bass Drum Room Bass Drum Rock Bass Drum 36C2 Standard Bass Drum Standard 2 Bass Drum Room Bass Drum 2 Rock Bass Drum 2 37C#2 Side Stick 38D2 Standard Snare Standard 2 Snare Room Snare Rock Snare 39D#2 Hand Clap 40E2 Standard Snare Rim Standard 2 Snare Rim Room Snare Rim Rock Snare Rim 4F2 Standard Tom 6 Standard 2 Tom 6 Room Tom 6 Rock Tom 6 42F#2 Standard Hihat Close Standard 2 Hihat Close Room Hihat Close Rock Hihat Close 43G2 Standard Tom Standard 2 Tom Room Tom Rock Tom 44G#2 Standard Hihat Pedal Standard 2 Hihat Pedal Room Hihat Pedal Rock Hihat Pedal 4A2 Standard Tom 4 Standard 2 Tom 4 Room Tom 4 Rock Tom 4 46A#2 Standard Hihat pen Standard 2 Hihat pen Room Hihat pen Rock Hihat pen 47B2 Standard Tom 3 Standard 2 Tom 3 Room Tom 3 Rock Tom 3 48C3 Standard Tom 2 Standard 2 Tom 2 Room Tom 2 Rock Tom 2 49C#3 Standard Crash Standard 2 Crash Room Crash Rock Crash 0D3 Standard Tom Standard 2 Tom Room Tom Rock Tom D#3 Standard Ride Standard 2 Ride Room Ride Rock Ride 2E3 Chinese Cymbal 3F3 Ride Bell Room Ride Bell Rock Ride Bell 4F#3 Tambourine G3 Splash Cymbal Room Splash Cymbal Rock Splash Cymbal 6G#3 Standard Cowbell Standard 2 Cowbell Room Cowbell Rock Cowbell 7A3 Standard Crash 2 Standard 2 Crash 2 Room Crash 2 Rock Crash 2 8A#3 Vibraslap 9B3 Ride Cymbal 60C4 Hi Bongo 6C#4 Low Bongo 62D4 Mute Hi Conga 63D#4 pen Hi Conga 64E4 Low Conga 6F4 High Timbale 66F#4 Low Timbale 67G4 High Agogo 68G#4 Low Agogo 69A4 Cabasa 70A#4 Maracas 7B4 Short Whistle 72C Long Whistle 73C# Short Guiro 74D Long Guiro 7D# Claves 76E Hi Wood Block 77F Low Wood Block 78F# Mute Cuica 79G pen Cuica 80G# Mute Triangle 8A pen Triangle 82A# Shaker 83B Jingle Bell 84C6 Bell Tree 8C#6 Castanets 86D6 Mute Surdo 87D#6 pen Surdo Funk (bank 7 ) Funk Bass Drum Funk Bass Drum 2 Funk Snare Funk Snare Rim Funk Tom 6 Funk Hihat Close Funk Tom Funk Hihat Pedal Funk Tom 4 Funk Hihat pen Funk Tom 3 Funk Tom 2 Funk Crash Funk Tom Funk Ride Funk Crash 2 7

18 GM Drum Kit List NET N. 27D# 28E 29F 30F# 3G 32G# 33A 34A# 3B 36C2 37C#2 38D2 39D#2 40E2 4F2 42F#2 43G2 44G#2 4A2 46A#2 47B2 48C3 49C#3 0D3 D#3 2E3 3F3 4F#3 G3 6G#3 7A3 8A#3 9B3 60C4 6C#4 62D4 63D#4 64E4 6F4 66F#4 67G4 68G#4 69A4 70A#4 7B4 72C 73C# 74D 7D# 76E 77F 78F# 79G 80G# 8A 82A# 83B 84C6 8C#6 86D6 87D#6 Electronic (bank 24 ) 808 (bank 2 ) House (bank 28 ) Jazz (bank 32 ) Electronic Bass Drum 808 Bass Drum House Bass Drum Jazz Bass Drum Electronic Bass Drum Bass Drum 2 House Bass Drum 2 Jazz Bass Drum 2 Electronic Snare 808 Snare House Snare Jazz Snare House Hand Clap Electronic Snare Rim 808 Snare Rim House Snare Rim Jazz Snare Rim Electronic Tom Tom 6 House Tom 6 Jazz Tom 6 Electronic Hihat Close 808 Hihat Close House Hihat Close Jazz Hihat Close Electronic Tom 808 Tom House Tom Jazz Tom Electronic Hihat Pedal 808 Hihat Pedal House Hihat Pedal Jazz Hihat Pedal Electronic Tom Tom 4 House Tom 4 Jazz Tom 4 Electronic Hihat pen 808 Hihat pen House Hihat pen Jazz Hihat pen Electronic Tom Tom 3 House Tom 3 Jazz Tom 3 Electronic Tom Tom 2 House Tom 2 Jazz Tom Crash Electronic Tom 808 Tom House Tom Jazz Tom Jazz Ride 808 Crash 2 Chinese Cymbal Mute Hi Conga 808 pen Hi Conga 808 Low Conga 808 Maracas 808 Claves Brush (bank 40 ) Brush Bass Drum Brush Bass Drum 2 Brush Snare Brush Snare Rim Brush Tom 6 Brush Tom Brush Tom 4 Brush Tom 3 Brush Tom 2 Brush Crash Brush Tom Brush Ride Brush Crash 2 8

19 MIDI Implementation Chart Function... Transmitted Recognized Remarks Basic Default 0 ch 6 Channel Changed Default Mode Messages Altered ************** ************** Note Number: True voice ************** 027 Velocity Note on 99H, V= Note off (9 9H. V=0) 027 After Key's Touch Channel's Pitch Bend Control Change Program Change System Exclusive System : Song Position Common : Song Select Bank Select Modulation Portamento Time Data Entry Volume Pan Expression Sustain Pedal Portamento N/FF Sostenuto Pedal Soft Pedal Reverb Program Chorus Program Reverb Level Chorus Level All Sound FF Reset All Controller All Notes FF : Tune System : Clock Real Time : Commands Aux : Local N/FF : All Notes FF Messages : Active Sense : Reset START \ STP : YES : N 9