Siemens AG 2014 RUGGEDCOM WIN. Wide Area Private Wireless Systems. Edition 10/2014. Brochure. siemens.com/ruggedcom

Transcription

1 WIN Wide Area Private Wireless Systems Brochure Edition 10/2014 siemens.com/ruggedcom

2 Contents Common features and benefits 3 WIN base stations 4 WIN7000, WIN subscriber units 6 WIN5100, WIN power injectors 8 RP100, RP110 9 Use cases 10 Order options 13 2 Contents

3 WIN Common features and benefits Siemens WIN series of products is the first broadband wireless product portfolio designed for private networks, delivering the benefits of carrier-grade 4G technology to critical infrastructure applications in harsh environments. Standards based Based on the IEEE e family of standards and third party validated to support interoperability with other vendors. Standalone mode Unique capability that allows WIN products to operate without an ASN gateway, reducing initial capital outlay significantly, while maintaining features such as GOOSE over the air and mobility. Range/throughput The WIN product family has built-in mechanisms to ensure the system is delivering maximum bandwidth for a given distance/coverage requirement at all times. Scale WIN has been designed to cover vast territories with embedded GPS synchronization to reduce self-interference and maximize frequency reuse. Quality of service WIN has built-in quality of service to enable operators to guarantee latency and throughput enabling a mix of IT and OT applications. Security The WIN product family has the security feature set to enable organizations that provide critical infrastructure to be compliant with legal mandates and security guidelines. Mobility The WIN product line is capable of maintaining session persistence with real time applications in a mobility environment at vehicular speeds. Common features and benefits 3

4 WIN base stations The WIN7000 and WIN7200 systems are powered by OFDMA radio technology, which is robust in adverse environmental conditions and enables Non-Line-Of-Sight (NLOS) operation. Leveraging link adaptation algorithms, modulation and coding are continuously adapted to prevailing link conditions, ensuring an optimal balance between robustness and efficiency. Mobile WIMAX compliance Based on IEEE e standard and WIMAX Forum Wave2 (MIMO) certification Rated for harsh environments IEEE 1613, IEC , Class 1 Div 2 / ATEX Zone 2, MIL-STD 810F, MIL-STD salt fog Long range Transmit and receive diversity combined with high power for improved reach and NLOS performance High bandwidth WIN has two built-in radios operating on the same frequency simultaneously (MIMO) to increase bandwidth (up to 40 Mbps) and spectral efficiency Volt/VAR Optimization WIN7200 Distribution Substation WIN5200 RP100 RX1512 IED RTU & Line Monitoring Voltage Regulator Control Capacitor Bank Control Switch Control Recloser Control Switch Control Demand Optimization Fault Detection, Isolation & Restoration (FDIR) Power Industrial Ethernet Distribution Substation Load Balancing RX1512 with Cellular Line Module G_RCM0_XX_00022 Multi-service field area network for smart grid applications 4 WIN base stations

5 WIN7000 high power base station The WIN7000 is a high power, broadband wireless base station, compliant to the IEEE e standard, designed for long range deployments in licensed frequency bands in harsh environments. Available in a number of different frequency bands, the WIN7000 has been designed around delivering maximum coverage where regulations permit high power operation. The single sector design can accomodate as many sectors as required at a given site, driven by coverage, bandwidth and subscriber considerations. WIN7200 standard power base station The WIN7200 is a lightweight broadband wireless base station, compliant with the IEEE e standard, also supporting unlicensed frequency bands in harsh environments. The WIN7200 is a single sector lightweight base station that can be easily installed on poles, street lamps or walls, and provides connectivity to fixed or mobile end points. Connected via a single Power over Ethernet (PoE) connection and easily provisioned, the WIN7200 reduces operational cost and complexity. Specifications WIN7000 WIN7200 Support of worldwide WIMAX deployments 1.X, 2.X and 3.X GHz bands 2.5, 3.5, 3.65, 4.9 and 5.8 GHz bands Flexible configurations Single cable power and Ethernet or fiber optic interface Single cable power and Ethernet interface Power output 2 x 36 dbm output power 2 x 27 dbm output power for 2.X GHz and 3.X GHz 2 x 24 dbm output power for 4.9 GHz 2 x 21 dbm output power for 5.8 GHz Width 290 mm (11.42 in) 257 mm (10.12 in) Height 756 mm (29.76 in) 228 mm (8.98 in) Depth 195 mm (7.68 in) 112 mm (4.41 in) Net weight 15 kg 4 kg WIN base stations 5

6 subscriber units Mobile WIMAX compliance Based on IEEE e standard and WIMAX Forum Wave 2 profiles Excellent performance in NLOS conditions Overcoming multipath and deep fading, providing extended range and easy installation Automatic Transmit Power Control (ATPC) Optimal network deployment, tight frequency reuse, and interference avoidance Numerous applications and services Guaranteed data, VoIP, video and other services based on advanced QoS Robust hardware -40 C to +75 C temperature range Global availability Wide frequency band support for deployments around the world Gigabit Ethernet Ring Industrial Ethernet Control Room WIN7200 WIN7200 WIN7200 WIN5100 G_RCM0_XX_00023 Fully integrated reliable wireless solutions offer broadband data rates for real-time data access 6 subscriber units

7 WIN5100 vehicular subscriber unit The WIN5100 is a broadband wireless subscriber unit, compliant with the IEEE e standard, with external RF connectors for use in fixed or mobile applications in harsh environments. The self-learning subscriber device automatically detects the base station on the best signal available, allowing for plug-and-play installation and maintenance-free operation. WIN5100 comes with external antenna connectors and can be ordered with an optional VDC input. WIN5200 outdoor subscriber unit The WIN5200 is a broadband wireless subscriber unit, compliant with the IEEE e standard, with a built-in directional antenna for use in harsh environments. WIN5200 greatly simplifies installation with LEDs for signal strength alignment, automatic connection to strongest serving base station and automated service provisioning, based on authentication credentials. Specifically designed for point-to-multipoint broadband wireless access applications, the WIN5200 provides efficient use of the wireless spectrum, supporting a range of applications. Specifications WIN5100 WIN5200 Antenna 2 N-type antenna connectors for connection to external omni or directional antenna High gain integrated antenna Flexible configurations Designed for vehicular, cabinet or pole top installations Designed for pole top installations Power supply Direct DC input (optional) Single cable Power over Ethernet (PoE) Width 226 mm (8.9 in) 226 mm (8.9 in) Height 80 mm (3.15 in) 80 mm (3.15 in) Depth 92 mm (3.62 in) 92 mm (3.62 in) Net weight 1.5 kg 2.5 kg subscriber units 7

8 power injectors RP100 and RP110 provide stability and performance under high levels of temperature variation, EMI stress, and voltage fluctuation that occur in electrical and industrial applications. Safety and performance RP100 and RP110 have the same certifications as protection and control devices providing the confidence and assurance of continued operation even in the worst conditions. Rugged Rated, -40 C to +85 C temperature range IEEE 1613 and IEC compliance means continued operation in harsh environments Supports a wide range of AC and DC input voltages Space-saving compact DIN rail design Reduces cabling, connection, and power supply requirements for PoE devices Rated for 12, VDC, VAC, VDC NEMA4X Cabinet Power over Ethernet CPE Unit WIN5200 IED Ethernet switch or serial server AC or DC Source RP100 or RP110 Surge Arrestor Power Industrial Ethernet G_RCM0_XX_00025 RP100 or RP110 designed to power WIN 5xxx or WIN72xx and to fit in any recloser cabinet 8 power injectors

9 RP100 single port 802.3at Power over Ethernet injector The RP100 is a single port 802.3at Power over Ethernet injector that provides the flexibility to power remote PoE devices using standard Cat 5 cable. Compatible with the latest 802.3at high-power PoE standard and backward compatible with low-power 802.3af PoE devices, the RP100 provides versatility and investment protection to handle future demands for increased power. Performance Configuration-free, plug and play operation 802.3at/af-compliant or RM version for connection to WIN products Network design flexibility The RP100 is a configuration free plug-and-play device suitable for any Power over Ethernet connection, supporting both IEEE 802.3af and 802.3at Power over Ethernet standards in one box. Specifications Width Height Depth Net weight RP mm (8.9 in) 80 mm (3.15 in) 92 mm (3.62 in) 1.5 kg RP110 RP110 serial device server with 802.3at/af Power-over-Ethernet injector The RP110 is a serial 802.3at Power over Ethernet injector with a built-in serial server, designed to bridge legacy serial devices onto an IP network and to power remote PoE devices, using standard Cat 5 cable. Converging data and power into a single cable saves costs, space and labor for new and existing installations. In addition to a power injector, the RP110 has a built-in serial server, designed to bridge legacy serial devices into an IP network. It offers a single interface capable of supporting RS422, 485, and 232 protocols, and is protocol aware for certain common serial protocols such as DNP and Modbus. Rugged Operating System (ROS ) The RP110 includes a subset of the features of the industry leading ROS operating system, including: Remote management and logging Serial IP encapsulation SNMP based network management Precision timing support Serial ports 1 RS485/RS422 port and 1 independent RS232 port 1 IRIG-B Output power injectors 9

10 Use cases Electric utility multi-service WIMAX Distribution Automation Mobile Workforce WIN5200 WIN7200 WIN5100 HMI & Visualization AMI Backhaul WIN5200 AMI Collector G_RCM0_XX_00041 WIN multi-service solution 10 Use cases

11 ITS wireless broadband Industrial Ethernet (Fiber Optic) WIN7200 WIN7200 RS900GP RS900GP Secure Mobile Wireless Access WIN5100 Secure Stationary Access WIN5200 Industrial Ethernet Onboard Data Terminal RS900GP G_RCM0_XX_00001 Secure wireless broadband coverage for mobile and stationary applications Use cases 11

12 Siemens WIN series of products is the first broadband wireless product portfolio designed for private networks, delivering the benefits of carrier-grade 4G technology to critical infrastructure applications in harsh environments. 12 Use cases

13 WIN order options Use the new -Selector for the selection and configuration of products. With the -Selector you can then transfer the order number to the Siemens Industry Mall and order your products. -Selector: For more information, visit: Order options 13

14 Order options WIN7000 Frequency MHz to 2690 MHz MHz to 3600 MHz MHz to 2400 MHz MHz to 1830 MHz MHz to 1525 MHz MHz to 1400 MHz MHz to 1805 MHz Interfaces 08 SFA: single mode fiber optic interface AC power option 09 SFD: single mode fiber optic interface DC power option (1) 10 PEC: Power over Ethernet copper interface Antennas (2) 11 Sector antenna, MHz,12 dbi, 90, X-Pol 12 Omni antenna, MHz, 5 dbi, 360, N-Female 13 Sector antenna BST, GHz, 17 dbi, 90, X-Pol 14 Sector antenna, GHz, 17 dbi, 65, X-Pol 15 Omni antenna, GHz, 8.5 dbi 360, N-Male 16 Omni antenna, GHz, 10 dbi, N-female 17 High gain sector, GHz, 17.5 dbi, 90, X -Pol 18 Sector antenna, MHz, 16 dbi, 90, X-Pol 19 Omni antenna, GHz, 9 dbi, 360, N-Female 20 Sector antenna, GHz, 16 dbi, 65, X-Pol 21 ANT, MHz, sector 16.0dBi Cables (2) Fiber optic Ethernet 3 m cable, SM, 1310 nm, sealed LC duplex connectors to LC duplex Fiber optic Ethernet 30 m cable, SM, 1310 nm, sealed LC duplex connectors To LC duplex Fiber optic Ethernet 50 m cable, SM, 1310 nm, sealed LC duplex connectors To LC duplex Fiber optic Ethernet 100 m cable, SM, 1310 nm, sealed LC duplex connectors To LC duplex Fiber optic Ethernet 150 m cable, SM, 1310nm, sealed LC duplex connectors to LC duplex 27 Fiber optic Ethernet 200 m cable, SM, 1310 nm, sealed LC duplex connectors To LC duplex 28 Cable PWR 30 m for SFA model 29 Cable PWR 60 m for SFA model 30 Cable PWR 80 m for SFA model 31 Cable combo PWR+Ethernet 2xDC+7xData 2 m, 32 Cable combo PWR+Ethernet 2xDC+7xData 30 m 33 Cable combo PWR+Ethernet 2xDC+7xData 80 m 34 Cable combo PWR+Ethernet 2xDC+7xData 60 m Mounting kit (3) In rack mount kit for WIN7000 base station, 1 for 2 BST WIN7200 Frequency MHz to 2690 MHz MHz to 3600 MHz MHz to 3800 MHz MHz to 5000 MHz MHz to 5850 MHz Antennas 06 Sector antenna, BST GHz, 17 dbi, 90, X-Pol 07 Sector antenna, GHz, 17 dbi, 65, X-Pol Omni antenna, GHz, 8.5 dbi, 360, N-Male Low gain omni antenna, GHz, 6 dbi, 360 Low gain omni antenna, GHz, 6 dbi, Low gain omni antenna, GHz, 5.5 dbi, 360, N-male 12 Sector antenna, MHz, 16 dbi, 90, X-Pol 13 Sector antenna, MHz, 17.5 dbi, 65, X-Pol 14 Omni antenna, GHz, 9 dbi, 360, N-Female 15 Sector antenna BST, GHz, 16 dbi, 90, X-Pol Cables 16 Outdoor Cat5 cable (ETH+48 VDC) 2 m 17 Outdoor Cat5 cable (ETH+48 VDC) 15 m 18 Outdoor Cat5 cable (ETH+48 VDC) 30 m 19 Outdoor Cat5 cable (ETH+48 VDC) 45 m 20 Outdoor Cat5 cable (ETH+48 VDC) 60 m 21 Outdoor Cat5 cable (ETH+48 VDC) 75 m 22 Outdoor Cat5 cable (ETH+48 VDC) 90 m Power supplies 23 Comes with AC/DC PoE injector 24 Optional RP100/RP110 (1) No power supply included assumed 48 VDC power provided by customer (2) Cables and antennas are recommended but need to be ordered separately. (3) Rack mounting kit is optional. 14 Order options

15 WIN5100 Frequency MHz to 1525 MHz MHz to 1805 MHz MHz to 1830 MHz MHz to 2400 MHz MHz to 2690 MHz MHz to 3600 MHz MHz to 3800 MHz MHz to 5000 MHz MHz to 5850 MHz Power options DC Direct VDC input with separate Ethernet connector, equipped with DC power cable, data cable ordered separately AC Standard commercial grade AC power injector power/data cable ordered separately Antennas 10 Low gain omni antenna, GHz, 6 dbi, Low gain omni antenna, GHz, 6 dbi, Low gain omni antenna, GHz, 5.5 dbi, 360, N-male 13 ANT Dual Slant Plate, GHz, 18 dbi KIT 14 ANT Flat CPE, GHz, 18 dbi, 18, N-Type 15 Vehicular antenna, GHz, 6 dbi 16 ANT dual slant, GHz, 13 dbi, N-Type KIT 17 ANT dual slant antenna, GHz, 22.5 dbi, N-TYPE 18 ANT omni, MHz, 9.5 dbi, N-Female 19 ANT dual slant, GHz, 10 dbi Data/PoE cables 20 Outdoor Cat5 cable (ETH+48 VDC) 2 m 21 Outdoor Cat5 cable (ETH+48 VDC) 15 m 22 Outdoor Cat5 cable (ETH+48 VDC) 30 m 23 Outdoor Cat5 cable (ETH+48 VDC) 45 m 24 Outdoor Cat5 cable (ETH+48 VDC) 60 m 25 Outdoor Cat5 cable (ETH+48 VDC) 75 m 26 Outdoor Cat5 cable (ETH+48 VDC) 90 m Power supplies 27 Comes with WIN1010 power supply Indoor AC/DC PS 48 V with PoE 28 Optional RP100/RP110 WIN5200 Frequency MHz to 1525 MHz MHz to 1805 MHz MHz to 1830 MHz MHz to 2400 MHz MHz to 2690 MHz MHz to 3600 MHz MHz to 3800 MHz MHz to 5000 MHz MHz to 5850 MHz Cables 10 Outdoor Cat5 cable (ETH+48 VDC) 2 m 11 Outdoor Cat5 cable (ETH+48 VDC) 15 m 12 Outdoor Cat5 cable (ETH+48 VDC) 30 m 13 Outdoor Cat5 cable (ETH+48 VDC) 45 m 14 Outdoor Cat5 cable (ETH+48 VDC) 60 m 15 Outdoor Cat5 cable (ETH+48 VDC) 75 m 16 Outdoor Cat5 cable (ETH+48 VDC) 90 m Power supplies 17 Comes with WIN1010 power supply Indoor AC/DC PS 48 V with PoE 18 Optional RP100/RP110 RP100 Power supply VDC or VAC VDC Power delivery 03 Standard compliant to 803.2at 04 WIN compliant use for WIN5xxx and WIN72xx Manufacturing modification 05 Standard 06 Conformal coating RP110 Power supply VDC or VAC VDC Power delivery 03 WIN compliant use for WIN5xxx Manufacturing modification 04 Standard 05 Conformal coating For more information on wireless approvals, visit: Order options 15

16 Security information Siemens provides products and solutions with industrial security functions that support the secure operation of plants, solutions, machines, equipment and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens products and solutions undergo continuous development. Siemens recommends strongly that you regularly check for product updates. For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action (e.g. cell protection concept) and integrate each component into a holistic, state-of-theart industrial security concept. Third-party products that may be in use should also be considered. For more information about industrial security, visit To stay informed about product updates as they occur, sign up for a product-specific newsletter. For more information, visit Siemens AG Process Industries and Drives Process Automation Postfach NÜRNBERG GERMANY Siemens Canada Limited 300 Applewood Crescent Concord, Ontario, L4K 5C7 CANADA Subject to change without prior notice Article No. 6ZB5531-0AH02-0BA0 DR.PN.RG.15.XXBR / Dispo BR ROT 16 En Printed in Germany Siemens AG 2014 The information provided in this brochure contains descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. Availability and technical specifications are subject to change without notice. All product designations may be trademarks or product names of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners.