D20 Compact Digital Positioner. Product Information

Transcription

1 Compact Digital Positioner Product Information

2 Compact Digital Positioner Description is a compact digital positioner that is very simple and quick to install and operate. To calibrate it, simply press the button for 5 seconds, will autocalibrate and tune itself in a few seconds. can be fitted with optional 40 ma feedback transmitter and limit switches. Optional LCD with menu is available on D. HART communication is optional. For visual indication you can select between flat arrow indicator or a dome indicator. Features and Benefit Simple to operate Calibrates itself in a few seconds Modular design, plug in and add on modules Intrinsically safe, NonIncendive or Explosion proof, ATEX & FM Suits Rotary and Linear applications Add in switch and 40mA position feedback option VDI/VDE 3845 VDI/VDE 3847 HART option LCD Menu option Intrinsically safe: ATEX II 1 G Ex ia IIC T4 FM IS Class 1, Div1, Group AD, T4 Class 1, Zone 0, AE Xia IIC, T4 FM Non incendive Class 1, Div, Group AD, T4 NIFW, Class 1, Div, IIC Explosion proof: ATEX II GD EEx d IIB + H T6 (Ta: 65 C) T5(Ta: 80 C) FM XP/I/1/BCD/T6 Ta = 65 C / T5 Ta = 80 C DIP/II/1/EFG Ta = 65 C / T5 Ta = 80 C, 4X IEC Ex d IIB + H T6 Gb Ta: 60 C, Ex tb IIC 0 C Db Ta: 80 C

3 D, LCD+Menu LED s indication. Calibration/configuration button 3. Add in feedback option

4 Press button and will auto calibrate itself. Press button and will auto calibrate itself. modular design gives you many options. Explosion proof on linear control valve. suits both rotary and linear actuators. mounted according to VDI/VDE 3845.

5 and D Technical data /D Compact Digital Positioner Input signal 40 ma Current supply min. 3,6 ma Current supply Max. 150 ma Load Standard 400 ohm at 0mA Load HART 470 ohm at 0mA User Interface Single push button, LEDs User Interface D LCD menu + 5 push buttons, LEDs Voltage drop Standard 8 VDC at 0mA Voltage drop HART.4 VDC at 0mA Angle of rotation min 040º Angle of rotation Max 00º Air supply range bar / 87 psi Out put 00% of air supply pressure Air supply quality Free from oil, dust and moisture IEC 770, ISA Air supply effect <0.1%FS for% pressure change at 6Bar / 87 psi Ingress protection IP66 / Nema 4X Operating humidity 00% rh noncondensing Air connections ¼ NPT Gauge ports 1/8 NPT (Bolt on block) Cable entry x ½ or x M0x 1,5 Terminals Screw terminals,5 mm (AWG 14) Operating Temperature 0 to +85ºC / 4 to +17ºF 40ºC/F (optional) Storage temperature 40 to +85ºC / 40 to +17ºF Air delivery capacity 7 Nm 3 6 bar / psi Air delivery capacity Double acting 7 Nm 3 6 bar / psi Air consumption Single acting 0.10 Nm 3 6 bar / psi Air consumption Double acting 0.10 Nm 3 6 bar / psi Cv air delivery Single acting 0,1 Cv air delivery Double acting 0,1 Cut off function Close 0.5% Open.5% Linearity <1% Sensitivity <0.05% Resolution <0,1% Repeatability <0.% Hysteresis + dead band <0.5% Temp effect <0.1%/K Mounting position effect <0,% CE 3/68/EEC, 004/8/EEC, 006/5/EEC Housing material Die cast Aluminium Surface treatment Powder coating Soft goods Nitrile Weight 1.4 kg / 3.1 lbs EX, DEX (as above except) Air delivery capacity 6,3 6 bar / 3,7 87 psi Cv air delivery: 0.08 Gauge ports x 1/8 NPT Weight, Al version 3 kg / 6.6 lbs Weight, Stainless steel version 5. kg / 13 lbs Optional plug in module Mechanical switches Size Rating Mechanical life Namur sensors SPDT Sub Sub miniature 3A, 15 VAC / A, 30VDC >1 x 6 operations P+F NJ V3 N Inductive DIN 134 Load current Voltage range Hysteresis <1mA>3mA 55 VDC 5% (5% typical) Temp range 5º to +0º C (48º to +373º F) Namur sensors Normal Voltage Load current Voltage range Hysteresis (max) 0.% P+F SJN 8 VDC 1mA<I<3mA 55 VDC Temp range 5º to +0º C (48º to +373º F) Namur sensors Normal Voltage Load current Voltage range P+F SJSN 8 VDC 1mA<I<3mA 55 VDC Hysteresis (max) (0.%) Temp range 40º to +0º C (33º to +373º F) Namur sensors Normal Voltage Load current Voltage range Hysteresis (max) 0.% P+F SJS1N 8 VDC 1mA<I<3mA 55 VDC Temp range 5º to +0º C (48º to +373º F) Proximity switches Rating Voltage max Current max Contact resistance max Operating time Transmitter Power supply Output SPDT W 00VDC 500mA 0. Ohm 1.0 ms 18 VDC 1 ma Resolution 0.1% Linearity ±0.5% Load impedance 600 Ohm at (1 VDC and 0mA) Alarm Output Supply 38 VDC Output 4 VDC

6 HOLE TOL. UNSPECIFIED TOLERANCES HOLE ACCORDING TOL. TO: SURFACE UNSPECIFIED TOLERANCES HOLE TOL. PROJECTION ACCORDING EUROPA UNSPECIFIED TO: SURFACE TOLERANCES ACCORDING PROJECTION TO: SURFACE EUROPA PROJECTION EUROPA HOLE TOL. UNSPECIFIED TOLERANCES HOLE TOL. ACCORDING TO: SURFACE UNSPECIFIED TOLERANCES ACCORDING PROJECTION TO: EUROPA SURFACE PROJECTION EUROPA DRW BY APPR. BY SCALE DATE DRW BY APPR. BY SCALE DRW BYDATE APPR. BY SCALE DATE DRW BY APPR. BY SCALE DRW DATE BY APPR. BY SCALE DATE Spindles and Dimensions drawings (mm) 4,5 33 0x1,5(x) /" M0x1,5(x) NPT(x) alt. 1/" alt. 1/" NPT(x) M0x1,5(x) NPT(x) alt. M0x1,5(x) 1/" NPT(x) alt. 1/" NPT(x) 5/"18 UNC (3x) 5/"18 UNC (3x) 5/"18 UNC (3x) 5/"18 UNC 5/"18 (3x) UNC (3x) M6 (4x) M6 (4x) 1/4" NPT (x) M6 (4x) M6 (4x) 1/4" NPT (x) (x) 1/4" NPT (x) (x) 1/4" NPT (x) M6 (4x) 1/4" NPT (x) (x) Double acting Double block Double acting acting block block Double acting Double blockacting block Gauge blockgauge Gauge block block Gauge block Gauge block ,5 4, ,8,3 3 3 "Namur S3 Spindle" S3 "Namur "Namur Spindle" Spindle" S3 "Namur S3 Spindle" "Namur Spindle" S3 "D Spindle" S3 S3 "D Spindle" "D Spindle" S3 "D Spindle" S3 "D Spindle" S0 "Double S0 D Spindle" S0 "Double "Double D Spindle" D S0 Spindle" "Double S0 D Spindle" "Double D Spindle" ,5 33,3 3 3 (x) 3 4 4,8, ,8 3,3 3 6,3 This document must not be copied without our written permission and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted This document must not be copied without our written permission and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted 13, 13, , , ,6 0 8,6 8, ,6 0 0 M6(x) M6(x) M6(x) M6(x) M6(x) Dim Dim Dim Dim Dim PART NO. PCS DESCRIPTION PART NO. PCS MATERIAL PART DESCRIPTION NO. DIMENSION PCS DESCRIPTION MATERIAL ANNOTATION DIMENSIONMATERIAL ANNOTATION DIMENSION ANNOTATION PART NO. PCS DESCRIPTION PART NO. PCS MATERIAL DESCRIPTION DIMENSION ANNOTATION MATERIAL DIMENSION ANNOTATION PMV PMV Positioners Positioners PMV Positioners KBM KBM 0041 KBM PMV Positioners 0041 PMV Positioners KBM 0041 KBM PALMSTIERNA INTERNATIONAL PALMSTIERNA AB INTERNATIONAL PALMSTIERNA AB Dim PALMSTIERNA INTERNATIONAL AB Dim Dim INTERNATIONAL AB Dim PALMSTIERNA INTERNATIONAL AB Dim KORTA GATAN SE SOLNA KORTA SWEDEN GATAN Tel:+46(0)8 SE KORTA SOLNA 6 00Fax:+46(0)8 GATAN SWEDEN SE171 Tel:+46(0) SOLNA SWEDEN Fax:+46(0)8 Tel:+46(0) Fax:+46(0) KORTA GATAN SE SOLNA KORTA SWEDEN GATAN Tel:+46(0)8 SE SOLNA SWEDEN 00Fax:+46(0)8 Tel:+46(0) Fax:+46(0) Explosion proof

7 Compact Digital Positioner Model Code A = Model no Digital compact positioner, Single button, LED status D Digital compact positioner, LCD Menu, LED status B = Approval, Certificate D General purpose version I Intrinsically safe version ATEX, FM, FM NI E Explosion proof ATEX, FM, IEC C = Connections Air, Electrical M 1/4 NPT air, M0 x 1,5 electrical x N 1/4 NPT air, 1/ NPT electrical x D = Housing/Surface treatment U Aluminium/Powder epoxy, black R Aluminium/Powder epoxy, Remote mounted position sensor S Stainless steel (Explosion proof only) E = Function S Single acting function D Double acting function, incl gauges (x) Stainless/Brass (Not possible for Explosion proof B = E) F = Mounting options / Spindle 0 Double D type (Adaptors available 01/06/6/30/36) 1 Flowtop, Dstyle+ nut, Direct mounting to Flowact 3 VDI/VDE 3845 rotary 3 Flat D type, for linear, IEC 46 G = Cover and Indicator PVA PMV,Black cover, Arrow indicator (Not for B = E) PVB PMV, Black cover, No indicator PVD PMV, Black cover, Dome indicator (Not for B = E) H = Temperature/seals Z Standard 0 C to 85 C (4 F to 185 F) Q Low temp 40 C to 85 C (38 F to 185 F I = Input signal/protocol 4 40 ma / none 5 40 ma, / HART J = Feedback option, 40 ma transmitter, switches X No feedback option T 40 ma transmitter only (Below not not possible for Explosion proof version, B= E) S Limit switches Mechanical SPDT + 40mA N Namur V3 type sensor, P+F NJV3N + 40mA P Limit switches Proximity SPDT + 40mA 4 Slot type Namur sensor, P+F SJS1N + 40mA 5 Slot type Namur sensor, P+F SJSN + 40mA 6 Slot type Namur sensor, P+F SJN + 40mA K = Options, Add in electronics 0 Standard diagnostics 1 Advanced, build in pressure sensor L = Accessories X No accessories M Gauge option ( x gauges included) N Gauge option ( x gauges included) Example: DMUS3PVAZ5S0M

8 Rätt Grafiska AB Ordernr: 8367 p/n: FCD PMENBR00150 Hazardous Locations Intrinsically safe 08ATEX 136X II 1 G Ex ia IIC T4 Ta: 85 C FM IS Class 1, Div1, Group AD, T4 Class 1, Zone 0, AE Xia IIC, T4 FM Non incendive Class 1, Div, Group AD, T4 NIFW, Class 1, Div, IIC, T4 NIFW Explosion proof 03ATEX1 II GD EEx d IIB + H T6 T6 (Ta:65 C) T5(Ta:80 C) FM XP/I/1/BCD/T6 Ta = 65 C / T5 Ta = 80 C DIP/II/1/EFG Ta = 65 C / T5 Ta = 80 C, 4X IEC Ex d IIB + H T6 Gb Ta:60 C, Ex tb IIC 0 C Db Ta: 80 C Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly selected, this Flowserve product is designed to perform its intended function safely during its useful life. However, the purchaser or user of Flowserve products should be aware that Flowserve products might be used in numerous applications under a wide variety of industrial service conditions. Although Flowserve can (and often does) provide general guidelines, it cannot provide specific data and warnings for all possible applications. The purchaser/user must therefore assume the ultimate responsibility for the proper sizing and selection, installation, operation, and maintenance of Flowserve products. The purchaser/user should read and understand the Installation and Maintenance (I & M) instructions included with the product, and train its employees and contractors in the safe use of Flowserve products in connection with the specific application. While the information and specifications contained in this literature are believed to be accurate, they are supplied for informative purposes onlyand should not be considered certified or as a guarantee of satisfactory results by reliance thereon. Nothing contained herein is to be construedas a warranty or guarantee, express or implied, regarding any matter with respect to this product. Because Flowserve is continually improving andupgrading its product design, the specifications, dimensions and information contained herein are subject to change without notice. Should any question arise concerning these provisions, the purchaser/user should contact Flowserve Corporation at any one of its worldwide operations or offices. 0 Flowserve Corporation, Irving, Texas, USA. Flowserve and PMV are registered trademarks of Flowserve Corporation. Palmstierna International AB Korta Gatan SE Solna SWEDEN Tel: +46 (0) Fax: +46 (0) infopmv@flowserve.com Germany Flowserve Sperberweg D41468 Neuss GERMANY Tel: +4 (0) Fax: +4 (0) pmvgermany@flowserve.com UK Flowserve Abex Road Newbury, Berkshire, RG14 5EY UK Tel: +44 (0) Fax: +44 (0) pmvukinfo@flowserve.com Scandinavia Palmstiernas Svenska AB Box Skoghall Sweden Tel: +46 (0) Fax: +46 (0) info@palmstiernas.se Italy Flowserve Spa Via Prealpi, Cormano (Milano) ITALY Tel: +3 (0) Fax: +3 (0) infoitaly@flowserve.com USA, Mexico PMVUSA 141 Westfair West Drive Houston, TX USA Tel: Fax: pmvusa@flowserve.com Canada Cancoppas Limited 55 Dunwin Drive, Unit Mississuga, Ont L5L 3N CANADA Tel: Fax: controls@cancoppas.com Asia Pacific Headquarters Flowserve Pte Ltd. No. 1 Tuas Avenue 0 REPUBLIC OF SINGAPORE Tel: +65 (0) Fax: +65 (0) fcdasiaprocess@flowserve.com South Africa Flowserve Unit 1, 1 Director Road Spartan Ext. 13 Kempton Park, Gauteng SOUTH AFRICA Tel: +7 (0) Fax: +7 (0) The Netherlands Fabromatic Rechtzaad 17 NL4703 RC Roosendaal Tel.: +(0)55888 Fax: +(0) China Flowserve Hanwei Building No. 7 Guanghua Road Chao Yang District 0004 Beijing CHINA Tel: +86 () 65 Fax: +86 ()