Freightliner Semi FULL-SIZE WOOD TOY PLAN SET. Free Wood Toy Plan. For more toy plans and how to s Visit Us at
|
|
|
- Allan Pope
- 7 years ago
- Views:
Transcription
1 Freightliner Semi 25-/2 L x 8-/ W x 8-7/8 H with trailer FULL-SIZE WOOD TOY PLAN SET It s all quick and easy to make with no fancy joints or cuts. Build it using common tools and with easy to find materials and supplies. READ BEFORE PRINTING! Please SAVE the PDF file before you print pages. To conserve printing ink we recommend that you print only the black and white precision line pattern drawings pages in the plan set. For more tips and frequently asked questions about our PDF files visit our website at www. toymakingplans.com and click the PDF Questions button at the top of our website.
2 2 This clear-coated wood toy can be built with danish plywood, hardwoods, softwoods or MDF. The finish is spray can Krylon or Rust-Oleum clear gloss. Spray 2 thin coats sanding each coat with 220 sandpaper when dry. Then spray light final coats of clear, sanding with 00 sandpaper when dry. Apply final coat without sanding. All Krylon and Rust-Oleum paints and finishes are non-toxic when dry.
3 Warning: Read before copying. The unauthorized reproduction or distribution of this copyrighted work is illegal. Criminal copyright infringement including infringement without monetary gain, is investigated by the FBI and is punishable by up to 5 years in federal prison and a fine of $250,000. Free Wood Toy Plan Freightliner Semi The plans and patterns in this planset can be photo-copied for your personal use when building the toys. ToymakingPlans. com plans and patterns are copyrighted and cannot legally be copied, distributed or shared with anyone for any other purpose. Make as many of each toy as you like! The wood toys in this plan set are royalty-free. You have the right to build any quantity of these toys for any reason. ToymakingPlans.com is dedicated to providing you with the information and ideas you need to develop your skills as a toymaker. We welcome your comments and any suggestions about this collection of toy plans. support@toymakingplans.com 20 ToymakingPlans.com - All rights reserved Note to the Readers: Due to different conditions, tools, and individual skills, ToymakingPlans.com assumes no responsibility for any damages, injuries suffered, or losses incurred as a result of following the information published in this plan set. Before beginning any project review instructions carefully. If any doubts or questions remain consult local experts or authorities. Copyright Information: Plans and patterns in this Plan Set can be photo-copied for personal use when building the toys. ToymakingPlans.com plans and patterns are copyrighted and cannot be distributed or shared for free or for any other reason. FULL-SIZE WOOD TO PLAN SET Color & Natural Wood Pictorial Views...- Truck Patterns Index, Parts List and How-To s Trailer Patterns Index, Parts List and How-To s...- Full-Size Precision Line Patterns Cartoning and Labels...-7
4 This color painted wood toy can be built with danish plywood, hardwoods, softwoods or MDF. The finish is spray can Krylon or Rust-Oleum. Spray 2 coats of primer sanding each coat with 220 sandpaper when dry. Then spray coats of color sanding with 00 sandpaper when dry. Apply final coat without sanding. All Krylon and Rust-Oleum paints and finishes are non-toxic when dry. The stripes are / wide striping tape that is available at automobile parts stores.
5 This color painted wood toy can be built with danish plywood, hardwoods, softwoods or MDF. The finish is spray can Krylon or Rust-Oleum. Spray 2 coats of primer sanding each coat with 220 sandpaper when dry. Then spray coats of color sanding with 00 sandpaper when dry. Apply final coat without sanding. All Krylon and Rust-Oleum paints and finishes are non-toxic when dry. The stripes are / wide striping tape that is available at automobile parts stores. 5
6 This clear-coated wood toy can be built with danish plywood, hardwoods, softwoods or MDF. The finish is spray can Krylon or Rust-Oleum clear gloss. Spray 2 thin coats sanding each coat with 220 sandpaper when dry. Then spray light final coats of clear, sanding with 00 sandpaper when dry. Apply final coat without sanding. All Krylon and Rust-Oleum paints and finishes are non-toxic when dry.
7 This clear-coated wood toy can be built with danish plywood, hardwoods, softwoods or MDF. The finish is spray can Krylon or Rust-Oleum clear gloss. Spray 2 thin coats sanding each coat with 220 sandpaper when dry. Then spray light final coats of clear, sanding with 00 sandpaper when dry. Apply final coat without sanding. All Krylon and Rust-Oleum paints and finishes are non-toxic when dry. 7
8 This clear-coated wood toy can be built with danish plywood, hardwoods, softwoods or MDF. The finish is spray can Krylon or Rust-Oleum clear gloss. Spray 2 thin coats sanding each coat with 220 sandpaper when dry. Then spray light final coats of clear, sanding with 00 sandpaper when dry. Apply final coat without sanding. All Krylon and Rust-Oleum paints and finishes are non-toxic when dry. 8 To view page 8- as a two-page spread in Adobe Reader:. Select View/Page Display/Two Page Scrolling 2. Select View/Page Display/Show Cover Page in Two Page View
9 This clear-coated wood toy can be built with danish plywood, hardwoods, softwoods or MDF. The finish is spray can Krylon or Rust-Oleum clear gloss. Spray 2 thin coats sanding each coat with 220 sandpaper when dry. Then spray light final coats of clear, sanding with 00 sandpaper when dry. Apply final coat without sanding. All Krylon and Rust-Oleum paints and finishes are non-toxic when dry. Free Wood Toy Plan To view page 8- as a two-page spread in Adobe Reader:. Select View/Page Display/Two Page Scrolling 2. Select View/Page Display/Show Cover Page in Two Page View To view page 8- as a two-page spread in Adobe Reader:. Select View/Page Display/Two Page Scrolling 2. Select View/Page Display/Show Cover Page in Two Page View
10 0 printer scale 2 ACTUAL SIZE To view page 0- as a two-page spread in Adobe Reader:. Select View/Page Display/Two Page Scrolling 2. Select View/Page Display/Show Cover Page in Two Page View 0
11 0 printer scale 2 ACTUAL SIZE Free Wood Toy Plan To view page 0- as a two-page spread in Adobe Reader:. Select View/Page Display/Two Page Scrolling 2. Select View/Page Display/Show Cover Page in Two Page View
12 Truck + Trailer Plan View Overview Page 20-2 Page 2 Freightliner Truck Parts List Page 22 Truck Top Plan View. -/2 x -/2 x make 2. / diameter x -/ make. -/2 diameter x /2 buy. / x 7/ x / make 5. / x / x -/8 make 2. / x 7/8 x -7/8 make 2 7. / x -/8 x -7/8 make 2 8. / x -/ x -5/ make. -/2 x -/8 x -/ make 2 0. /8 diameter x -5/ make 2. / x x -/2 make 2. / x / x 7/ make. / diameter x /2 make 2 8 Page 25 Part Wheels Part #TWT50 Buy -/2 Dia. x /2 thick Hole size / Page 2 Truck Side Plan View 2 2
13 FREIGHTLINER TRUCK Free Wood Toy Plan Part Wheels Part #TWT50 Buy -/2 Dia. x /2 thick Hole size /
14 8 Step 2 Assembly FREIGHTLINER TRUCK Step Step : Step 2: Assembly Step : Step : Using the Plan Views on pages 22-2 as a guide, glue and clamp Part s to Part 8 and to Part. Let assembly dry before proceeding. 0 0 Using the Plan Views on pages 22-2 as a guide, glue and clamp Parts, 7 and 2 to the left side of the Step Assembly. Let assembly dry before proceeding. 2 7 Using the Plan Views on pages 22-2 as a guide, glue and clamp Parts, 7 and 2 to the right side of the Step 2 Assembly. Let assembly dry before proceeding. Step Assembly Using the Plan Views on pages 22-2 as a guide, glue and clamp Parts, 5 and to the Step Assembly. Let assembly dry before proceeding. 2 Step 5: Step Assembly Using the Plan Views on pages 22-2 as a guide, glue and clamp Parts, 0 and to the Step Assembly. Let assembly dry before proceeding. 2 Step 5 Assembly Step : Using the Plan Views on pages 22-2 as a guide, insert three Part 2 axles into the Step 5 Assembly. Glue the six Part wheels to the three Part 2 axles in a position that allows the wheels and axles to rotate freely. Let assembly dry.
15 5
16 Page 2-27 Page 20-2 Truck + Trailer Plan View Overview Trailer Top Plan View Page 28-2 Trailer Side Plan View Page Page 2- Page Part Wheels Part #TWT50 Buy -/2 Dia. x /2 thick Hole size /. /2 x 5-/2 x make 2 2. /2 x 2-/ x -/8 make. / x 2-/ x make. / x 2-/ x -/ make 5. / x / x make. /8 diameter x make Freightliner Trailer Parts List 7. /8 diameter x /2 make 8. / diameter x make. / x 2-/ x 2-7/8 make 0. -/2 x 2-/2 x make. -/2 diameter x /2 buy 2. / diameter x -/ make 2
17 FREIGHTLINER TRAILER Free Wood Toy Plan Part Wheels Part #TWT50 Buy -/2 Dia. x /2 thick Hole size / 8 0 7
18 0 FREIGHTLINER TRAILER Step Assembly Step 2 Assembly 7 Step Assembly Step : Step 2: Step : Step : Using the Plan Views on pages 2-2 as a guide, glue and clamp Part 2, and to the one Part that has two /8 holes. Let assembly dry before proceeding. Using the Plan Views on pages 2-2 as a guide, glue and clamp the remaining Part that has one /8 hole to the Step Assembly. Let assembly dry before proceeding. Using the Plan Views on pages 2-2 as a guide, glue and clamp Part 8 and Part 0 to the Step 2 Assembly. Let assembly dry before proceeding. Using the Plan Views on pages 2-2 as a guide, insert two Part 2 axles into the Step Assembly. Glue the four Part wheels to the two Part 2 axles in a position that allows the wheels and axles to rotate freely. Let assembly dry before proceeding. door stop Step 5: Using the Plan Views on pages 2-2 as a guide, glue and clamp Part 5 to Part. Let door assembly dry. Glue Part door stop flush with trailer right side. Install pivoting door by gluing two Part s through trailer sides and into Part door. Do not glue Part s to door to allow free rotation of door on two Part s. 8 5 Step Assembly
19
20 0 printer scale 2 ACTUAL SIZE ATTENTION: THIS FULL-SIZE PRECISION PLAN VIEW IS FOR ASSEMBLY REFERENCE. TRUCK + TRAILER PLAN VIEW OVERVIEW FOR DETAILED TRUCK PLAN VIEW SEE PAGES FOR DETAILED TRAILER PLAN VIEWS SEE PAGES 2-2. IMPORTANT NOTE To print out enough paper patterns for the entire plan set from your computer printer only print pages 20 through 5. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring the printer scale on each pattern with a ruler. If printed size of pattern is not 00% adjust printer settings. 20
21 IMPORTANT NOTE To print out enough paper patterns for the entire plan set from your computer printer only print pages 20 through 5. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring the printer scale on each pattern with a ruler. If printed size of pattern is not 00% adjust printer settings. 0 printer scale 2 ACTUAL SIZE Free Wood Toy Plan TRUCK + TRAILER PLAN VIEW OVERVIEW FOR DETAILED TRUCK PLAN VIEW SEE PAGES FOR DETAILED TRAILER PLAN VIEWS SEE PAGES 2-2. ATTENTION: THIS FULL-SIZE PRECISION PLAN VIEW IS FOR ASSEMBLY REFERENCE. 2
22 ATTENTION: THIS FULL-SIZE PRECISION PLAN VIEW IS FOR ASSEMBLY REFERENCE. 0 printer scale 2 ACTUAL SIZE TRUCK TOP PLAN VIEW FOR DETAILED TRAILER PLAN VIEWS SEE PAGES IMPORTANT NOTE To print out enough paper patterns for the entire plan set from your computer printer only print pages 20 through 5. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring the printer scale on each pattern with a ruler. If printed size of pattern is not 00% adjust printer settings. 22
23 IMPORTANT NOTE To print out enough paper patterns for the entire plan set from your computer printer only print pages 20 through 5. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring the printer scale on each pattern with a ruler. If printed size of pattern is not 00% adjust printer settings. 0 printer scale 2 ACTUAL SIZE ATTENTION: THIS FULL-SIZE PRECISION PLAN VIEW IS FOR ASSEMBLY REFERENCE. Free Wood Toy Plan 0 8 TRUCK SIDE PLAN VIEW FOR DETAILED TRAILER PLAN VIEWS SEE PAGES
24 0 printer scale 2 ACTUAL SIZE IMPORTANT NOTE FREIGHTLINER TRUCK To print out enough paper patterns for the entire plan set from your computer printer only print pages 20 through 5. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring the printer scale on each pattern with a ruler. If printed size of pattern is not 00% adjust printer settings. /8 dia. x 7/ deep 5/ dia. x / deep TOP VIEW PART. -/2 x -/2 x make /8 dia. x 7/ deep -/ hole x /2 deep -/ hole x /2 deep 5/ dia. hole thru 2 places / dia. x /8 deep SIDE VIEW PART 5/ dia. hole thru Forstner Bit How to use a Forstner Bit to drill wheel wells:. Cut out the Part block. Wait to drill the 5/ axle holes. 2. Securely clamp the block to your work table with the Side View facing up and parallel to the work surface.. Using the center of the axle holes crosshairs as a guide, drill a small pilot hole into the block.. Line up and position a -/ Forstner drill bit to the pilot hole. 5. Drill a / deep hole in places.. Using the Forstner bit pilot hole as a guide drill the three 5/ axle holes. 2
25 FREIGHTLINER TRUCK. -/2 diameter x /2 buy Part Wheels Part #TWT50 Buy -/2 Dia. x /2 thick Hole size / 0 printer scale 2 ACTUAL SIZE 8. / x -/ x -5/ make IMPORTANT NOTE Free Wood Toy Plan To print out enough paper patterns for the entire plan set from your computer printer only print pages 20 through 5. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring the printer scale on each pattern with a ruler. If printed size of pattern is not 00% adjust printer settings / x 7/8 x -7/8 make 2 7. / x -/8 x -7/8 make 2 2. / diameter x -/ make 2 5 degree angle 0. /8 diameter x -5/ make 2 0. / x 7/ x / make 5. -/2 x -/8 x -/ make 2 5. / x / x -/8 make 2. / x x -/2 make 2 2. / x / x 7/ make. / diameter x /2 make 2 25
26 ATTENTION: THIS FULL-SIZE PRECISION PLAN VIEW IS FOR ASSEMBLY REFERENCE. 0 printer scale 2 ACTUAL SIZE TRAILER TOP PLAN VIEW FOR DETAILED TRUCK PLAN VIEW SEE PAGES IMPORTANT NOTE To print out enough paper patterns for the entire plan set from your computer printer only print pages 20 through 5. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring the printer scale on each pattern with a ruler. If printed size of pattern is not 00% adjust printer settings
27 0 printer scale 2 ACTUAL SIZE Free Wood Toy Plan IMPORTANT NOTE To print out enough paper patterns for the entire plan set from your computer printer only print pages 20 through 5. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring the printer scale on each pattern with a ruler. If printed size of pattern is not 00% adjust printer settings. TRAILER TOP PLAN VIEW FOR DETAILED TRUCK PLAN VIEW SEE PAGES
28 0 printer scale 2 ACTUAL SIZE 5 door stop TRAILER SIDE PLAN VIEW FOR DETAILED TRUCK PLAN VIEW SEE PAGES ATTENTION: THIS FULL-SIZE PRECISION PLAN VIEW IS FOR ASSEMBLY REFERENCE IMPORTANT NOTE To print out enough paper patterns for the entire plan set from your computer printer only print pages 20 through 5. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring the printer scale on each pattern with a ruler. If printed size of pattern is not 00% adjust printer settings.
29 0 printer scale 2 ACTUAL SIZE Free Wood Toy Plan TRAILER SIDE PLAN VIEW FOR DETAILED TRUCK PLAN VIEW SEE PAGES ATTENTION: THIS FULL-SIZE PRECISION PLAN VIEW IS FOR ASSEMBLY REFERENCE. 8 IMPORTANT NOTE To print out enough paper patterns for the entire plan set from your computer printer only print pages 20 through 5. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring the printer scale on each pattern with a ruler. If printed size of pattern is not 00% adjust printer settings. 2
30 0 printer scale 2 ACTUAL SIZE FREIGHTLINER TRAILER /8 dia. hole thru: Right side only. /2 x 5-/2 x make 2 /8 dia. hole thru: Drill after taillights are glued in place. /8 dia. x /8 deep (2 places) IMPORTANT NOTE To print out enough paper patterns for the entire plan set from your computer printer only print pages 20 through 5. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring the printer scale on each pattern with a ruler. If printed size of pattern is not 00% adjust printer settings. 0
31 FREIGHTLINER TRAILER 0 printer scale 2 ACTUAL SIZE Free Wood Toy Plan /2 x 2-/ x -/8 make 2. -/2 diameter x /2 buy 2. / diameter x -/ make 2 Part Wheels Part #TWT50 Buy -/2 Dia. x /2 thick Hole size / IMPORTANT NOTE To print out enough paper patterns for the entire plan set from your computer printer only print pages 20 through 5. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring the printer scale on each pattern with a ruler. If printed size of pattern is not 00% adjust printer settings.
32 0 printer scale 2 ACTUAL SIZE FREIGHTLINER TRAILER IMPORTANT NOTE To print out enough paper patterns for the entire plan set from your computer printer only print pages 20 through 5. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring the printer scale on each pattern with a ruler. If printed size of pattern is not 00% adjust printer settings.. / x 2-/ x make 2
33 FREIGHTLINER TRAILER 0 printer scale 2 ACTUAL SIZE Free Wood Toy Plan. / x 2-/ x make. / x 2-/ x -/ make 5. / x / x make. /8 diameter x make 7. /8 diameter x /2 make 8. / diameter x make 7 IMPORTANT NOTE To print out enough paper patterns for the entire plan set from your computer printer only print pages 20 through 5. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring the printer scale on each pattern with a ruler. If printed size of pattern is not 00% adjust printer settings. 5 8
34 0 printer scale 2 ACTUAL SIZE FREIGHTLINER TRAILER. / x 2-/ x 2-7/8 make IMPORTANT NOTE To print out enough paper patterns for the entire plan set from your computer printer only print pages 20 through 5. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring the printer scale on each pattern with a ruler. If printed size of pattern is not 00% adjust printer settings.
35 FREIGHTLINER TRAILER 0 printer scale 2 ACTUAL SIZE Free Wood Toy Plan /2 x 2-/2 x make IMPORTANT NOTE To print out enough paper patterns for the entire plan set from your computer printer only print pages 20 through 5. The pages are all line drawings in black to conserve printer ink. Check your printer printed size accuracy by measuring the printer scale on each pattern with a ruler. If printed size of pattern is not 00% adjust printer settings. 5/ dia. hole thru 2 places 5
36 Add a pro-touch to your work with a labeled gift box. The entire Freightliner Truck and Trailer fit beautifully in this off-the-shelf corrugate carton that you can order online in quantities of 25 cartons. The cartons are delivered to your door in to 5 days. Ask for item number S-. The carton size is x 2 x. Shipping is extra. Order at
37 BOX LABEL Free Wood Toy Plan Classic Freightliner Semi Truck Handmade Wood Toy Classic Freightliner Semi Truck Handmade Wood Toy 7
Building an Off-Center Fixture for Turning Pendants
Building an Off-Center Fixture for Turning Pendants Turning a pendant off-center with most available metal pendant chucks means that you will have a significant amount of mass off center, which will limit
Easy Six Cube Bookshelf. Copyrighted Material. Page 1
Compare to: Land of Nod Cube Collection, 6 Cube Bookshelf Skill Level: Beginner Easy Six Cube Bookshelf I love the storage cubes in kids rooms because they give you an opportunity to have your children
How to Build Your Own CornHole Game
How to Build Your Own CornHole Game DIMENSIONS Here is a diagram with the basic measurements for the Cornhole board game. SUPPLIES 1/2 thick sheet of plywood one 4 x4 or two 2 x4 s 8 long 2 4 s (4) 4 1/2
How to Build a Poker Table
How to Build a Poker Table www.pokertablematerials.com 10-Person Poker Table- 96 x 48 These are step by step instructions for building a poker table. The table will measure 48" x 96" and have a 4" wide
www.cornholesupplies.com
www.cornholesupplies.com How To Build Regulation Cornhole Boards Home of the Original Cornhole Bags and Boards Supply List: 1-4' X 8' Piece of Plywood (pre sanded) 4-2" X 4" X 8' Studs (2 by 4s make sure
Here is your set of Detailed Plans from Copyright 2004 All Rights Reserved
Here is your set of Detailed Plans from Copyright 2004 All Rights Reserved Materials for the House Here is the list of materials you will need to construct the basic house then to cover it with roofing
30a. 31a. 30b 12. 31b. 29a 28a 1/48SCALEHEMSDAUPHIN PAGE2/10
9 11 10 43 42 49 50 32 7 51 52 48 58 5 6 8 59 2 3 4 1 24 30a 31a 30 30b 12 31b 31 28 13 29 29a 28a 1/48SCALEHEMSDAUPHIN PAGE2/10 38 82 38f 85 84 86 83 37d 35 38a 37 60 17 21 20 16 15 87 27 34 40c 36b 36a
Ladder Shelf Plans Final dimensions: 25 L x 21 W x 72 H
Ladder Shelf Plans Final dimensions: 25 L x 21 W x 72 H Copyright 2011. MLCS Woodworking. Page 1 Router bits and supplies needed: 3/8 Rabbeting bit (#10691) 1 Bottom Cleaning bit (#7941) Top and Bottom
Total Quantity: IMPORTANT: Plans are to be used with 3 x6 Plexiglass (SKU #298-017).
# Materials: Quantity Each: 4x4x8 3 2x4x8 2 2x8x8 1 4x8x3/4 plywood 1 3 x6 corkboard (can be 18 of the 1 x1 pieces) 1 3 x6 plexiglass 1 8 door casing 3 Primer 1 qt. Total Quantity: TIPS FOR SUCCESSFUL
REDI-EXIT COMMERCIAL FIRE DOOR AND EXTERIOR DOOR KITS INSTALLATION GUIDELINES
REDI-EXIT COMMERCIAL FIRE DOOR AND EXTERIOR DOOR KITS INSTALLATION GUIDELINES Tools Required Tape Measure Hammer Slotted Screw Driver #2 & #3 Philips Screw Driver 3-4 Foot Level 12 Pry Bar Cold Chisel
Wine Rack & Glass Storage Bench Chris Gardner
Wine Rack & Glass Storage Bench Chris Gardner Quantity Length Width Material Part 2 48 16 3/4 birch plywood top, bottom 2 14 16 3/4 birch plywood sides 2 14 13 3/4 birch plywood support dividers 2 3 15
Gate Leg Drop Leaf Table Plans
Preparing the table top blanks: Cut and glue enough 3/4 stock to make three panels 40 long by 24 wide (they will be cut to final size at a later time). While the glue dries we will work on the legs. Preparing
TopSky DLG Installation Manual
TopSky DLG Installation Manual Attention: Because after the compound materials solidify, there will be ammonia iris on the surface, which affect the bonding strength afterwards. Please polish with sandpaper
INSTALLATION INSTRUCTIONS for Bifold Doors (JII103)
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for premium composite, hollow and solid core molded Bifold Doors. Bifolds are designed for fast
DIY CABINET REFACING INSTALLATION GUIDE
DIY CABINET REFACING INSTALLATION GUIDE CABINET REFACING INSTALLATION Are you ready to reface your outdated cabinets? This guide will show you how to install your new Facelifters Cabinet Refacing Products
Star Trek: The Motion Picture Tricorder
#PRP1786 Star Trek: The Motion Picture Tricorder Prop Kit Assembly Manual For the first time ever, Roddenberry.com is pleased to introduce the Star Trek: The Motion Picture Tricorder build it yourself
Recommended Procedure For How to Prepare and Paint Carbon Fiber and Composite Parts
FRP Techniques Recommended Procedure For How to Prepare and Paint Carbon Fiber and Composite Parts Figure 1. A primered composite tailbase with a carbon fiber top wing element. Figure 2. Installing and
Trundle Bed Plans (For Use Under Twin or Full-Size Standard Length Beds)
Bunk Beds Unlimited Trundle Bed Plans (For Use Under Twin or Full-Size Standard Length Beds) On the following pages we have included all of the necessary drawings and requirements for a Modified twin-size
The tablesaw may be your shop s most valuable cutting. Crosscut Sleds. Foolproof. Innovative approach guarantees perfect results
Foolproof Crosscut Sleds Innovative approach guarantees perfect results B Y A L A N T U R N E R The tablesaw may be your shop s most valuable cutting tool, but for precise, repeatable crosscuts it needs
Quali cations. Forename(s) Surname Number of seat
FOR OFFICIAL USE Quali cations N5National 015 X719/75/01 MONDAY, 5 MAY 1:00 PM :30 PM Mark Design and Manufacture *X7197501* Fill in these boxes and read what is printed below. Full name of centre Town
Making Laminated Rolling Pins
Making Laminated Rolling Pins Introduction Why go to the trouble to make a rolling pin when you can go down to your local discount store and buy one that works just fine for less than $5? As wood turners,
Building Pluto Subwoofers with Large PVC Pipe
Building Pluto Subwoofers with Large PVC Pipe I decided to make the Pluto subwoofers from 10-12 diameter PVC pipe. It seemed to me that these would be a better visual match to the Plutos themselves. The
PROJECT PLAN. Stackable shelves
PROJECT PLAN Stackable shelves This article originally appeared in The Family Handyman magazine. For subscription information, visit www.familyhandyman.com Please note that pages that appeared in the magazine
Garage Workbench Plans
www.bobsplans.com Garage Workbench Plans Every home woodworker knows the importance of making efficient use of the available space in his or her shop. This workbench is designed to provide the maximum
Raised Panel Doors Made Simple With Freud s 2+2 Raised Panel Bit Set
Raised Panel Doors Made Simple With Freud s 2+2 Raised Panel Bit Set Congratulations on your purchase of Freud s world class 2 + 2 Raised Panel Bit Set. This revolutionary design combines two small wings
Free Pinewood Derby Car Plan
Maximum Velocity! Free Pinewood Derby Car Plan Maximum Velocity! Free Pinewood Derby Car Plan Published and Distributed by: Maximum Velocity, Inc info@maximum-velocity.com www.maximum-velocity.com Copyright
Installing Window and Door Mouldings
Installing Window and Door Mouldings About Window and Door Mouldings The trim around windows and doors greatly influences the look and style of your interior. They also bridge the gaps and cover spaces
Junkers Ju 88 Manual Version 1.2 13 March 2008
Junkers Ju 88 Manual Version 1.2 13 March 2008 Specifications Wingspan: 49.75 inches Area: 339 square inches Length: 36.12 inches Power: 2x BP21 Brushless 2x Speed-400 Copyright 2007 Thomas A. Jacoby and
Rudder Repair and refinish
Rudder Repair and refinish Montgomery 23 Dauntless The before photograph A receipt found inside the boat showed a previous owner had enlisted a boat yard to perform maintenance on the rudder by shortening
Cedar Cottage Doghouse Plans
Overlapping cedar shingles add an element of charm to this medium size doghouse. The walls, floor, and trim are constructed of solid cedar, making it naturally weather resistant and provides excellent
*** MAIN VERSION OF BOM ***
*** MAIN VERSION OF BOM *** This is the main parts list for the 2013-2014 FTC game. The parts are listed in different categories (such as "Field Elements, "Hardware," "Wood," etc.). The item numbers assigned
Copyright 2008 OLYMPUS CORPORATION All Rights Reserved. Paper Craft Assembly Manual
Paper Craft Assembly Manual Before assembly: 1/9 Tips on assembly: Print all the parts (Photo-quality paper is recommended for ink-jet printers and paper of medium thickness (0.20 mm) for laser printers.)
Balance Beam Plans. Copyright 2007 Ben MacLeod Email: sales@betterplans.net Website: www.betterplans.net
Balance Beam Plans Copyright 2007 Ben MacLeod Email: sales@betterplans.net Website: www.betterplans.net Balance Beam Plans By Ben MacLeod Copyright 2007 Tools required: -Mitre saw, circular saw, jig saw,
How to Install Hardwood Flooring Over a Sub Floor
How to Install Hardwood Flooring Over a Sub Floor Installation Preparation Instructions Read the entire instructions before starting your project. 1) INSPECT EACH PLANK (see fig. a) Wood is a natural product
Wren Kitchens Installation Tips... 3. Carefully check your kitchen delivery... 4. Measuring out and marking up... 5. Fitting the base cabinets...
tra 1 Index Wren Kitchens Installation Tips... 3 Carefully check your kitchen delivery... 4 Measuring out and marking up... 5 Fitting the base cabinets... 6 Fitting the corner cabinets... 7 The 972mm or
Children s Furniture Projects
This is an excerpt from the book Children s Furniture Projects by Jeff Miller Copyright 2002 by The Taunton Press www.taunton.com CHILD S ROCKER KIDS ARE ALWAYS IN MOTION. It s not easy to get them even
Build and Fly the Fokker D- 8
Details are carefully carried out. Note movable controls The high wing gives it unusual stability Build and Fly the Fokker D- 8 Complete Data From Which You Can Build a Successful Model of a Famous German
Stair Parts Installation. Tricks
Stair Parts Installation Tips & Tricks Introduction Your DIY staircase guide Welcome to the Stairpart home installation guide. Your stairway is both a functional and focal point in your home, so keeping
Hive Top Ventilation Shims
Hive Top Ventilation Shims When preparing your bee hives for the winter, it is very important to provide for ventilation at the top of the hive. Through out the winter, the bees are expelling a lot of
Air Hockey Training Camp Care and repair of your Air Hockey Playfield
The playfield is the single most expensive part of your Dynamo Air Hockey table. Proper care will keep your table attractive and functional for your players, and bring them back for more games. CLEAN YOUR
Build a Junior Solar Sprint Model Car Kit Materials: 1 PITSCO Ray Catcher Sprint Kit or Solar Made Junior Solar Sprint Kit 1 White Sheet of Plastic
Build a Junior Solar Sprint Model Car Kit Materials: 1 PITSCO Ray Catcher Sprint Kit or Solar Made Junior Solar Sprint Kit 1 White Sheet of Plastic Coated Paper 2 Balsa Sheets (10-1/2 x4 x3/16 ) 2 Alligator
Industrial Strength Rocket Launcher
Industrial Strength Rocket Launcher Description: Instructions for the construction of an industrial strength rocket launcher for use with paper rockets. Materials: Schedule 40 PVC piping and bushings from
AZEK Rail Install Guide
TRIM MOULDING DECK PORCH RAIL PAVERS AZEK Rail Install Guide Installing AZEK Rail with CableRail by Feeney... 1 Installing CableRail by Feeney for AZEK Rail... 7 Installing AZEK Rail Stairs with CableRail
Storage Bins U-BILD. Plan No. 797 A MERICA' S FAVORITE WOODWORKING P LANS. Bill of Material. Cutting Schedule
U-ILD A MERICA' S FAVORITE WOODWORKING P LANS Storage ins Plan No. 797 Copyright U-uild, Inc., 2004. All rights reserved. Printed in the U.S.A. A true country classic, this build-it-yourself storage bin
Tractor Painting Tips
Keeping your tractor or equipment well kept & free from rust & corrosion will extend the life of your investment & help retain its value for a longer period of time. It can be difficult, in many cases,
Chrome Finishing For 3d Powder Prints
Chrome Finishing For 3d Powder Prints Powder Printing is definitely a very good technology for producing complex parts, but it can only generate the shape and that is not all about the appearance. Post
RadianceRail Installation Guide
RadianceRail Installation Guide Installing RadianceRail with CableRail by Feeney... 2 Installing CableRail by Feeney for RadianceRail... 7 Installing RadianceRail Stairs with CableRail by Feeney... 10
FREEBIRD THE ORIGINAL D.I.Y. ORNITHOPTER! Tools and Glue. Required Materials
Do not try to make your ornithopter using "household materials". If you want it to fly, you have to build it right. FREEBIRD THE ORIGINAL D.I.Y. ORNITHOPTER! Wingspan: 16 inches Weight: 1/4 ounce The Ornithopter
Sample- for evaluation only. Advanced PowerPoint. TeachUcomp, Inc. A Presentation of TeachUcomp Incorporated. Copyright TeachUcomp, Inc.
A Presentation of TeachUcomp Incorporated. Copyright TeachUcomp, Inc. 2010 Advanced PowerPoint TeachUcomp, Inc. it s all about you Copyright: Copyright 2010 by TeachUcomp, Inc. All rights reserved. This
Build a Precision. Crosscutting Sled
Build a Precision Crosscutting Sled On-the-money, splinter-free crosscuts are well within your grasp using most well-made tablesaws, but you do have to do a few things to ensure great results cut after
DuraTex Waterbased Speaker Cabinet Texture Coating
Rehab Speaker Cabinets Easily, Beautifully Inexpensively Before After With DuraTex Waterbased Speaker Cabinet Texture Coating We visited the local audio sales and rental company, Music Arts Enterprise
Active and Passive Sash Replacement
for Andersen Gliding Windows Read all instructions carefully before attempting this procedure. If you have any questions about your ability to complete the procedure, call Andersen at 1-888-888-7020 for
Air Hockey Training Camp Care and repair of your Air Hockey Playfield
The playfield is the single most expensive part of your Dynamo Air Hockey table. Proper care will keep your table attractive and functional for your players, and bring them back for more games. CLEAN YOUR
Old-Fashioned Push-Along Toys
Old-Fashioned Push-Along Toys RUNNING ROSY A doll to kiss, a doll to cuddle at some time or other, most of us have sought the cozy, clinging comfort of a toy doll. Running Rosy is something more than a
BUILD A CARPORT. 2 - Planning the carport. 3 - Designing the carport
BUILD A CARPORT You only need basic DIY and woodworking skills to build a carport. The most important part of the job is setting the supporting posts truly vertical - a job for which another pair of hands
1. Lay out 2 pieces of 7/8" tubing and mark for bending as shown. Remember that the bend is in the shaded area as shown below in Figure 1.
MINI BIKE PLANS Page 1 INTRODUCTION Before starting to build your Mini-Bike, be sure that you have all the parts shown on the material list. You will note that tubing has been used in the construction.
BUILDINGA 1/10 SCALE FLATBED TRAILER
VOLUME 1, ISSUE 1 BUILDINGA 1/10 SCALE FLATBED TRAILER BUILT, DESIGNED & WRITTEN BY NATHAN MYERS MATERIALS: FEATURES: While the design was kept simple to allow anyone to be able to build their own trailer,
Traditional Sonar and DSI Sonar Installation
Traditional Sonar and DSI Sonar Installation This document covers the installation of the transducer and display unit installation, which includes connecting the unit to power and installing the unit on
Go-kart for little race-drivers
Go-kart for little race-drivers Drill and drive. Go-kart What it lacks in speed, it more than makes up for in fun: the go-kart will excite little race-drivers. 1 Introduction It s only a go-kart, but it
Star Trek: The Next Generation
#PRP1784 Star Trek: The Next Generation First Season Medical Tricorder Head Unit Prop Kit Assembly Manual Roddenberry.com presents, for the first time ever, the Medical Tricorder Head Unit as used by Dr.
STAIR TREAD & RISER INSTALLATION GUIDELINES
STAIR TREAD & RISER INSTALLATION GUIDELINES ARTISTIC FINISHES DOES NOT WARRANTY THE COMPLETENESS OR ACCURACY OF ANY INSTALLATION. THE INSTALLATION CONTRACTER MUST HAVE THE EXPERIENCE AND KNOWLEDGE TO COMPLETE
KFC Restaurant kit in HO scale
KFC Restaurant kit in HO scale Parking lot base and cars not included This kit includes all building parts milled in white styrene plastic, clear window glazing, and logo & poster self adhesive decals.
30 minutes in class, 2 hours to make the first time
Asking questions and defining problems Developing and using models Planning and carrying out investigations 30 minutes in class, 2 hours to make the first time 3 12 x 24 x ¾ inch plywood boards 1 x 12
Assembly Instructions Basic Folding-Leg Box Frame Style
Assembly Instructions Basic Folding-Leg Box Frame Style Basic Folding Leg Cornhole Board Concept 1 2 12 3 1 2 3 15 16 4 1 4 52 9 R1 3 4 6 21 48 12 1 4 Bolt Washer 9 13 16 35 Washer Double Nut CornholePlayers.net
Router Table Plans. www.bobsplans.com
www.bobsplans.com Router Table Plans Increase the capabilities of your router with this weekend project. Features a sliding fence with EZ-Mount clamps. These clamps are simple to make and grip tightly
Overnight Sensations Speaker Kit
Overnight Sensations Speaker Kit Thank you for purchasing the Overnight Sensation cabinet kit. This speaker kit was precision cut using CNC machinery for the best possible fit and finish. With a little
FTC 2015-2016 DIY Mountain Build Guide
FTC 2015-2016 DIY Mountain Build Guide Assembly Instructions Check out the DIY2015-2016 Prints and BoM for individual part details. Release 1.0 9/10/15 Page 1 This guide and Bill of Materials are for constructing
Stick Together. 3 6 th grade and 3 7 th /8 th grade TEAMS PER CENTER
Stick Together MESA DAY CONTEST RULES 2015 2016 LEVEL: Grades 6-8 TYPE OF CONTEST: COMPOSITION OF TEAMS: NUMBER OF TEAMS: SPONSOR: Team 1-2 students per team 3 6 th grade and 3 7 th /8 th grade TEAMS PER
Best Barns USA Assembly Book
Best Barns USA Assembly Book Revised November 27, 2013 the Easton - R 12'x 20' Manufactured by Reynolds Building Systems, Inc. 205 Arlington Drive Greenville, PA 16125 724-646-3775 This manual is copyrighted.
2&3 SECTION LOFT LADDER
TWIST CATCH ASSEMBLY A4 A2 A1 A3 A7 A6 A5 2&3 SECTION LOFT LADDER Images feature the 3 section loft ladder, but the same instructions apply to both 2 & 3 section ladders Installation and Operating Instructions
WOODWORKS: BEGINNER PROJECT FISHING POLE RACK
WOODWORKS: BEGINNER PROJECT FISHING POLE RACK Storing fishing rods and reels can be quite difficult unless you have a special rack for them. Here s a simple, easy-to-build design for a rack that not only
Barewood Octagon and Elongated Windows Installation Instructions
Step-by-step instructions to a beautiful window. Measuring and Installation of your new window from Century Specialty Windows couldn't be easier with our step-by-step instructions. Quality, function and
Pigeon Spike Stainless Economy Bird Spikes Includes specifications for: Pigeon Spike Stainless models, hardware and surface cleaning.
Three-Part Specifications - Copyright 2014 - Nixalite of America Inc Pigeon Spike Stainless Economy Bird Spikes Includes specifications for: Pigeon Spike Stainless models, hardware and surface cleaning.
The Hive Bodies. In the Beekeeper s Work Shop. Building a Bee Hive: The Hive Bodies. by Stephen E. Tilmann
The Hive Bodies In the Beekeeper s Work Shop The hive body is the heart of a managed bee hive colony (Figure 1). It is where the queen lays her eggs, the house bees raise the brood and the workers store
Build Your Own Solar Car Teach build learn renewable Energy! Page 1 of 1
Solar Car Teach build learn renewable Energy! Page 1 of 1 Background Not only is the sun a source of heat and light, it s a source of electricity too! Solar cells, also called photovoltaic cells, are used
Pads for use on Dual Action / Random Orbital Sanders
70515V 5115 5" PSA 5/16 x 24 12,000 70516V 5116 6" PSA 5/16 x 24 10,000 J70515 5215 5" Hook 5/16 x 24 12,000 J70516 5216 6" Hook 5/16 x 24 10,000 Firm, low profile urethane molded pad with a heavy duty
Installation Instructions Avalanche XUV Cap IMPORTANT! IMPORTANT!
Installation Instructions Avalanche XUV Cap IMPORTANT! Read all instructions carefully before commencing any work. Always wear safety equipment. Some installation steps will require two or more installers.
BLADE REPAIR INSTRUCTION BOOKLET
BLADE REPAIR INSTRUCTION BOOKLET Contents Section I: Section II: Section III: Section IV: Section V: Section VI: Removing a Blade Refer to this section if you need to remove the blade from an oar shaft.
Printrbot Getting Started Guide. For models: Simple
Printrbot Getting Started Guide For models: Simple Contents 4 4 4 5 5 5 6 6 6 6 7 8 Chapter 1: Welcome Overview Support Chapter 2: Your Printrbot has arrived... now what? Printrbot Kits Pre-Assembled Printrbots
Assembly instructions: Seven A4-sized sheets. Paper craft: Four A4-sized sheets with 18 parts in all
Thank you for downloading this paper craft model of the Blakiston's Fish Owl. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model of this
Note: The teacher will need to construct one sample automobile using the parts above to show to the students.
Preview of Main Idea The development of the assembly line was critical to the success of Henry Ford s Model T vehicle and to the development of Detroit as the Motor City. The efficiencies of the assembly
HOW TO MAKE A MOTOR BRACKET
HOW TO MAKE A MOUNTING BRACKET FOR AN ELECTRIC MOTOR Often, brackets supplied with purchased items (e.g. electric motors or servos) are not ideally suited for fitting into our models or they are not supplied
SHELVES. www.tedswoodworking.com
SHELVES It's rare that bookshelves look as interesting as the objects you display on them. After all, how much can you decorate the edges of your shelves and sides? This unit is unusual because the shelves
IMPORTANT INSTALLATION GUIDE VALENCIA SQUARE CORNER SHOWER READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING THE INSTALLATION
INSTALLATION GUIDE VALENCIA SQUARE CORNER SHOWER SEALANT REQUIRED TO COMPLETE THIS INSTALLATION: (Not supplied) Sika Sikasil NG (Arctic White) To seal the WHITE shower door and returns to the shower tray.
AMF112 Instruction Manual
AMF112 Instruction Manual Scan here to view product demo and install videos or visit san.us/103 Milestone AV Technologies 6436 City West Parkway Eden Prairie, MN 55344 USA Customer Service Americas: 800-359-5520
Picnic Table Plans. Made out of a single sheet of plywood, it s also portable! By Kevin Ayer. This children's picnic table would
Picnic Table Plans Made out of a single sheet of plywood, it s also portable! By Kevin Ayer Materials One 4- by 8-foot sheet of 3 4-inch AC plywood Twelve 11 4-inch wood screws Primer and exterior paint
JOB READY ASSESSMENT BLUEPRINT PAINTING AND DECORATING. Test Code: 2060 Version: 01
JOB READY ASSESSMENT BLUEPRINT PAINTING AND DECORATING Test Code: 2060 Version: 01 Specific Competencies and Skills Tested in this Assessment: Wood Finishes Identify thinning products Identify wood finish
Toy Box. Project Plan. Kreg Jig. www.kregjig.com
Toy ox www.kregjig.com Kreg ig 32" What you ll What need You ll Need Toy ox TOOLS 25 Circular Saw Drill Kreg ace Clamp or C-Clmap Kreg ight ngle Clamp DWE & SUPPLIES 25 Materials PTS LIST SOPPIN LIST Quantity
AZEK Rail Install Guide
TRIM MOULDING DECK PORCH RAIL PAVERS AZEK Rail Install Guide Installing AZEK Rail with Glass Infill... 2 Installing AZEk Rail Stairs with Glass Infill... 9 Notes...14 Please read all instructions completely
Micro. Pitts Special for the RFFS-100 by Chris O Riley
Micro Pitts Special for the RFFS-100 by Chris O Riley F1 F2 F3 F4 1 2 3 4 All wood 1/32 inch sheet unless otherwise stated. F1 F2 F3 F4 Small balsa blocks for LG reinforcement Small balsa blocks for LG
INSTALLATION RECOMMENDATIONS. Outdoor Rubber Tiles
INSTALLATION RECOMMENDATIONS Outdoor Rubber Tiles Prior to Installation: The Outdoor Rubber Tiles and accessory transition pieces intended for this installation have been shipped to you via a freight carrier
3/4 PIPE CLAMP WITH STAND
3/4 PIPE CLAMP WITH STAND Model 94053 ASSEMBLY AND OPERATING INSTRUCTIONS (3/4 DIAMETER PIPE NOT INCLUDED.) 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com
DATACARD Firmware Update Instructions. Contents. Firmware Update Application for Windows Operating Systems. What You Need
DATACARD Firmware Update Instructions Firmware Update Application for Windows Operating Systems Contents What You Need How to Update Using the Go Green Upgrade CD How to Update Using Files Downloaded from
1976 McWilliams Wines Rail Tank Car Kit
PO Box 56 Thornleigh NSW 2120 www.infrontmodels.com.au 1976 McWilliams Wines Rail Tank Car Kit History In 1976 McWilliams Wines commissioned Tullochs Ltd of Rhodes, Sydney, to build dome-less Rail Tank
By SP Partners, LLC. www.rainbowatticstair.com INSTALLATION GUIDE. Prestige
By SP Partners, LLC www.rainbowatticstair.com INSTALLATION GUIDE Prestige IMPORTANT READ THIS FIRST Inspect stair for any damage prior to installation. Stair is NOT to be installed while home is under
So here are the instructions after combining some web searches and the bindings that I have.
Installing Salomon SNS Pilot Sport Classic Cross Country Ski Bindings I have some old x-country skis with 3 pin nordic bindings that I no longer have the boots for. As such, I decided to get new boots
THE CRACKER BARREL OLD COUNTRY STORE ROCKING CHAIR ASSEMBLY INSTRUCTIONS
THE CRACKER BARREL OLD COUNTRY STORE ROCKING CHAIR ASSEMBLY INSTRUCTIONS Manufacturer of Solid Hardwood Rocking Chairs Since 1834 Thank you for purchasing a quality rocking chair from Cracker Barrel Old
Gear PEPSI CAN STOVE INSTRUCTIONS
Gear PEPSI CAN STOVE INSTRUCTIONS [NOTE: Updated Instructions are now available. The new stove is less likely to develop flame leaks and the fuel/air mixture is improved. Instructions for a simmer ring
Filling Grain and Finishing Calls With CA Glue
Filling Grain and Finishing Calls With CA Glue Call makers use dozens if not hundreds of different products and techniques to finish their calls. The emphasis is on sealing the wood, and giving the call
Printrbot Getting Started Guide. For models: Printrbot Plus (v2) Printrbot LC (v2) Printrbot jr
Printrbot Getting Started Guide For models: Printrbot Plus (v2) Printrbot LC (v2) Printrbot jr Contents 4 Chapter 1: Welcome 4 Overview 4 Support 5 Chapter 2: Your Printrbot has arrived... now what? 5