SMD Terminal Blocks with Push-Buttons
|
|
- Abigayle Jane Stewart
- 7 years ago
- Views:
Transcription
1 SMD Terminal Blocks with Push-Buttons
2 SMD Terminal Blocks Small is Big WAGO s new SMD Terminal Blocks provide push-button termination for conductors mm/awg 4 18 (060 Series) and mm/awg 0 16 (061 Series), making them ideal for PCB-based LED lighting and industrial electronics. Both 060 and 061 Series are available as 1-, - and -pole variants, in light gray or black, and with 4/6 mm pin spacing. Proven CAGE CLAMP S Spring Pressure Connection Technology provides push-in termination of solid and ferruled conductors. Integrated push-buttons simplify termination of fine-stranded conductors and removal of all conductor types. WAGO s 060 Series Board-to-Board Link easily in-lines several LED modules into a single string. Featuring 8 mm pin spacing, 060 Series is ideal for higher rated voltages up to 60 V. 060 Series 061 Series Benefits: Info A height of just 4.5 or 5.6 mm prevents on-board LED shadowing Delivery in tape-and-reel packaging for full integration into SMT soldering process Push-in termination of solid and ferruled conductors via CAGE CLAMP S connection Potential for significant savings via automated pick-and-place assembly Easy handling via side-entry wiring and top-of-unit actuation Available in 1 pole configurations Terminal strips of different lengths can be assembled side-by-side without pole loss, allowing for a reduced number of variants and lower production costs Rated voltage: up to 60 V IEC Nominal current: up to 9 A or 1 A Applications: The 060 and 061 Series many advantages allow them to support a wide range of applications. From compact, conventionally wired LED spotlights up to industrially wired, recessed ceiling luminaires, WAGO s new SMD Terminal Blocks are the perfect connection between driver and module. The terminal blocks accommodate a broad range of conductors making them highly versatile for wolrdwide applications. The 061 Series also provides direct LED module supply via extended conductor sizes up to 1.5 mm (AWG 16). Furthermore, 061 Series sets new standards for compact wiring applications in measuring and control technology. Conclusion: WAGO s 060 and 061 Series are the industry s most compact and easy-to-use SMD terminal blocks for wiring industrial electronics and LED modules.
3 Handling 060 Series Inserting solid conductors via push-in termination. Inserting/removing fine-stranded conductors by lightly pressing on push-button (e.g., using a -5 operating tool or a ball point pen). Board-to-Board Link Inserting board-to-board link into terminal block. Assembly: Place PCBs on a flat surface and connect terminal blocks on adjoining PCBs via board-to-board link. The PCBs must be secured (see figure above). Disassembly: Pull PCBs apart (max. 10 connections/disconnections). 061 Series* Inserting solid conductors via push-in termination. *061 Series will be available in Summer 01. Inserting/removing fine-stranded conductors by lightly pressing on push-button (e.g., using a -5 operating tool or a ball point pen).
4 Technical Data 060 Series, 4 mm CAGE CLAMP S Conductor size: solid mm Conductor size: fine-stranded mm 6 V 160 V 0 V.5 kv.5 kv.5 kv UL 1977 Approvals per Rated voltage, 1-pole 600 V Rated voltage, or more poles 50 V Nominal current UL 9 A AWG _ 6.1 _ Pack. Unit/Pieces per Reel SMD terminal blocks with push-buttons in tape-and-reel packaging, light gray* / / / mm Conductor size: fine-stranded (with uninsulated ferrule) L _ mm Conductor size: fine-stranded (with insulated ferrule) ) Connection technology Conductor Data 4 mm / in. Reel diameter: 0 mm mm / in. Board-to-board link for SMD terminal blocks with push-buttons Pack. Unit 6 V 160 V 0 V kv.5 kv.5 kv Series, Board-to-Board Link min. 4.4 max. 5.4 max. min. 4.4 max A max. Conductor size: solid mm Conductor size: fine-stranded mm 400 V 6 kv 60 V 1000 V 6 kv 6 kv 9 A Approvals per UL V Nominal current UL Conductor size: fine-stranded 0.5 mm (with insulated ferrule) _ mm Conductor size: fine-stranded (with uninsulated ferrule) AWG Pack. Unit/Pieces per Reel SMD terminal blocks with push-buttons in tape-and-reel packaging, light gray* / _ L (4) CAGE CLAMP S 4 Connection technology 4.5 Conductor Data 1. ) 8 mm / 0.14 in Series, 8 mm Reel diameter: 0 mm Conductor size: solid mm Conductor size: fine-stranded mm 4 kv 4 kv 4 kv 1 A 1 A 1 A SMD terminal blocks with push-buttons in tape-and-reel packaging, light gray* / _ _. Reel diameter: 0 mm / / *Depending on reflow soldering temperatures and times, color deviations may occur for light gray connectors. These deviations will have no impact on functionality V 60 V AWG 50 V 1.8 ) L CAGE CLAMP S 6.4 Connection technology 5.6 Conductor Data 5. 6 mm / in Series, 6 mm _.7
5 Surface Mount Technology SMT Surface Mount Technology (SMT) means soldering electronic components directly onto PCB surface pads without drilling holes. The basic SMT process consists of applying solder paste to the PCB via solder dispensing equipment, screen or stencil printing. SMT assembly is performed using fully automated placement machines. Automated assembly Printing (solder) Reflow Soldering Process: SMT components THR-Component SMD Application Examples: The SMD components are soldered to the board in infrared, convection or vapor phase ovens.
6 / SMD FLYER 1.0 US - 0/01 - Printed in Germany - Subject to design changes To the video WAGO Kontakttechnik GmbH & Co. KG Postfach 8 80 D - 85 Minden Hansastraße 7 D - 4 Minden Germany Phone: Fax: info@wago.com Online:
SMD TERMINAL BLOCKS. Small is Big!
SMD TERMINAL BLOCKS Small is Big! SMD TERMINAL BLOCKS A compact and low-profile PCB connection is required to achieve the most uniform light distribution, while minimizing shadowing. WAGO s surface-mount
More informationPCB TERMINAL BLOCKS. Product Overview
PCB TERMINAL BLOCKS Product Overview AT A GLANCE: THE ENTIRE RANGE Variants: Pin pacing: Terminal blocks, terminal strips (double-, triple-, quadruple-deck terminal strips), disconnect terminal blocks
More informationpicomax The Pluggable Connection System
picomax The Pluggable Connection System TECHNOLOGY THIS SPECIALIZED CAN T MEET ALL REQUIREMENTS. YES IT CAN. CONTENTS picomax Pin spacing: 3. mm/0.138 in;.0 mm/0.197 in; 7. mm/0.29 in Versatile Pluggable
More informationThe Rail-Mounted Terminal Block System
The Rail-Mounted Terminal Block System 2 The Industry s Largest Portfolio for Industrial, Building and Transportation Applications Industry s widest range of conductor sizes: 0.14 95 mm 2 (AWG 4/0 24)
More informationTechnology this. specialized can t meet all. requirements. Yes it can. The Pluggable Connection System
Technology this specialized can t meet all requirements. Yes it can. The Pluggable Connection System , the pluggable connection system that is unlike anything you ve ever seen before. Traditional Design
More informationJUMPFLEX 857 Series. 0...20 ma 2...10 V. 4...20 ma. Transducers / Relay and Optocoupler Modules
0888-0172/0002-3601 JUMPFLEX 857 Series 2.0 E 12/08 Printed in Germany Subject to design changes 2...10 V 0...20 ma 4...20 ma WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 32385 Minden Hansastraße 27
More informationSpring Cage Feed-Through Terminal Blocks ST
Spring Cage Feed-Through Terminal Blocks ST The product family ST with the new spring cage system "mini spring" is extremely space-saving. Space is saved thanks to a clearly smaller spring system without
More informationemobility WAGO Leading the Charge
emobility WAGO Leading the Charge Six Steps to a Full Battery WAGO supports every aspect of charging from: TO-PASS GPRS Modem, VPN Router, 761-520 Identification / Registration /Authorization RFID SMS
More informationThe range of rail-mounted terminal blocks. for a perfect electrical installation.
The range of rail-mounted terminal blocks for a perfect electrical installation. The range of rail-mounted terminal blocks for a perfect electrical installation. The new standard for rail-mounted terminal
More information14 PHOENIX CONTACT Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108. info@powermation.com - 800-843-9859 - www.powermation.
14 PHOENIX CONTACT PLUSCON circular is a circular connector for use in industrial automation. The range of design sizes available is varied, starting with the design sizes M5 to M8 and M1, for sensor/actuator
More information08. SEK IDC CONNECTORS
. IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these
More information01. HARTING RJ INDUSTRIAL RJ45 ETHERNET CONNECTORS
. HARTING RJ INDUSTRIAL ETHERNET CONNECTORS Ethernet is is coming up to standard industrial interface. Therefore, automation devices such as controllers, sensors and actuators feature possess on one or
More informationGMKDS 3/ 3-7,62. Extract from the online catalog. Order No.: 1731734
Extract from the online catalog GMKDS 3/ 3-7,62 Order No.: 1731734 The illustration shows a 2-position version PC terminal block, Nominal current: 24 A, Nom. voltage: 500 V, Pitch: 7.62 mm, Number of positions:
More informationPIN IN PASTE APPLICATION NOTE. www.littelfuse.com
PIN IN PASTE APPLICATION NOTE 042106 technical expertise and application leadership, we proudly introduce the INTRODUCTION The Pin in Paste method, also called through-hole reflow technology, has become
More informationDirectory chapter 04
M Directory chapter 04 D-Sub Mixed subminiature D connectors New Page D-Sub mixed connector system general information................... 04.02 Contact arrangements............................................
More informationFeed-through terminal block - SSK 110 KER-EX - 0502058
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid
More informationMKDSN 1,5/ 3-5,08. Extract from the online catalog. Order No.: 1729131
Extract from the online catalog MKDSN 1,5/ 3-5,08 Order No.: 1729131 The figure shows a 10-position version of the product PC terminal block, Nominal current: 13.5 A, Nom. voltage: 250 V, Pitch: 5.08 mm,
More informationElectronic Board Assembly
Electronic Board Assembly ERNI Systems Technology Systems Solutions - a one stop shop - www.erni.com Contents ERNI Systems Technology Soldering Technologies SMT soldering THR soldering THT soldering -
More informationA&C Solutions: please contact us.
FOR LIGHTING ABOUT SOLUTIONS DESIGNED AROUND YOUR BUSINESS A&C Solutions is a connector & harness distribution specialist that offers a tailor made solution to any application and delivers high quality
More informationDirectory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02.
Directory chapter 02 - () Types D, E, F, FM, 2F, F9, interface connectors I/U Page Technical characteristics types D and E.............................. 02.10 Type D connectors.................... 02.11
More informationPC/104, PC/104 -Plus, VarPol connectors
164 PC/104, PC/104 -Plus, VarPol connectors Definitions 166 Technical specifications 168 Hole specifications 169 PC/104 170 PC/104-Plus 172 Accessories: PC/104 and PC/104-Plus 174 VarPol angled pin header
More informationFuse, disconnect & test terminal blocks. 100% spring clamp technology. The safe alternative.
Fuse, disconnect & test 100% spring clamp technology. The safe alternative. Innovations for even greater safety TOPJOB S disconnect terminal block in 2- and 4-conductor design Transverse disconnect for
More informationPC 4/ 4-ST-7,62. Extract from the online catalog. Order No.: 1804920
Extract from the online catalog PC 4/ 4-ST-7,62 Order No.: 1804920 The figure shows a 5-pos. version of the product Plug component, nominal current:, rated voltage: 400 V, pitch: 7.62 mm, no. of positions:
More informationPowermate Range Pitch 7.62
owermate Range itch 7.62 in headers Socket connectors CB connection Solder connection SV 7.62/90 500 V / 43 A SV 7.62/180 500 V / 41 A.2.4 Cable connection Clamping yoke connection Tension clamp connection
More informationKSC Series Sealed Tact Switch for SMT
KSC Series Features/enefits Positive tactile feeling J or G terminations Various heights IP67 Typical Applications Automotive Cellular phones Industrial electronics Network infrastructure and IT Elevator
More informationWINSTA The Pluggable Connection System A Complete Range of Connectors
WINSTA The Pluggable Connection System A Complete Range of Connectors WINSTA The Pluggable Connection System Perfectly Plugged! We all use them on a daily basis: Pluggable connectors. We appreciate their
More informationHARTING Ethernet Cabling 8-poles Overview
Ethernet Cabling 8-poles Overview RJ45 Connectors [on page 8] System cables [on page 12] Distribution modules and Outlets [on page 17] Connectors [on page 20] System cables [on page 26] Panel feed-throughs
More informationDo s and don'ts of connection systems Are there any options when the clearance and creepage distances are not sufficient for UL 1059?
Do s and don'ts of connection systems Are there any options when the clearance and creepage distances are not sufficient for UL 1059? Speaker: Wolfgang Sichmann, Product Manager PCB Plug-In Connectors,
More informationDEK-REL- 24/1/SEN. Extract from the online catalog. Order No.: 2964050
Extract from the online catalog DEK-REL- 24/1/SEN Order No.: 2964050 Relay terminal block for sensor, with soldered-in miniature relays, contact (AgNi+Au): small to medium loads, 1 N/O contact, input voltage
More informationOMRON Connectors: A Perfect Match for Your Requirements
OMRON : A Perfect Match for Your Requirements Boards to FPC/FFC Connections FPC/FFC Features of Rotary Backlock Mechanism Rotary latch is independent of the FPC socket. 1 The Rotary latch will not release
More informationHigh Power Connectors for Power Supply and Power Circuits
Introduction Silver Plated Power Contacts with Contact Springs for Maximum Performance in Exposed Applications The demand for shortest possible periods of machine shut-downs and assembly times requires
More informationEMOSAFE EN-100. Network Isolators for PCB assembly 1 GENERAL DESCRIPTION. Product Data Sheet ENGLISH
ENGLISH EMOSAFE EN-100 Product Data Sheet Network Isolators for PCB assembly November 2013 1 GENERAL DESCRIPTION The EMOSAFE EN-100 Network Isolator interrupts all galvanically conducting connections (conductors
More informationThis product can be assembled to the baseplate maintaining 5 mm center-to-center spacing. Thus any number of poles can end-to-end stack.
page 1/5 Plug-in Screw Connector System for Printed Circuit Boards 950-NLFL-DS 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 950-NLFL-DS 950-NLFL & 971-SLK TECHNICAL INFORMATION Description This two
More informationMaking Wiring Easier Push-in Terminal Blocks for Modular Machine Designs
Making Wiring Easier Push-in Terminal Blocks for Modular Machine Designs By Gordon Busch Product Marketing Industrial Connection Technology Phoenix Contact GmbH & Co. KG Blomberg, Germany Executive Summary
More informationPC 4/ 3-G-7,62. Extract from the online catalog. Order No.: 1804807
Extract from the online catalog PC 4/ 3-G-7,62 Order No.: 1804807 The figure shows a 5-pos. version of the product Header, Nominal current:, Nom. voltage: 400 V, Pitch: 7.62 mm, Number of positions: 3,
More informationMultilevel Socket Technologies
Multilevel Socket Technologies High Performance IC Sockets And Test Adapters Overview Company Overview Over 5,000 products High Performance Adapters and Sockets Many Custom Designs & Turn-Key Solutions
More informationAutomation Solutions. LÜTZE LCOS empty housing for Industrial Automation
Automation Solutions LÜTZE LCOS empty housing for Industrial Automation Open, modular, universal: The new intelligent electronic housing LÜTZE LCOS Flexible: Use of the housing as a standalone solution
More informationMounting Instructions for SP4 Power Modules
Mounting Instructions for SP4 Power Modules Pierre-Laurent Doumergue R&D Engineer Microsemi Power Module Products 26 rue de Campilleau 33 520 Bruges, France Introduction: This application note gives the
More informationSocket P2RF-05-S P2RF-08-S Clip & Release Lever R99-11 nameplate for MY
Screwless Clamp Terminal Socket Screwless clamping greatly contributes to reducing wiring time. No over or under tightening of cable connection so better contact reliability is achieved. Double wiring
More informationRedundancy Module QUINT-DIODE/40
Redundancy Module QUT DIODE provides: 00% decoupling of power supplies connected in parallel Can be installed in potentially explosive areas Load currents up to 60 A supported Easy assembly by snapping
More information221 Series LEVER-NUTS. Compact Splicing Connectors for all Wire Types
221 Series LEVER-NUTS Compact Splicing Connectors for all Wire Types Overview General description Value proposition Target markets Features / Advantages / Benefits Variants / Types Product Features at
More informationAMPSEAL* Automotive Plug Connector and Header Assembly
AMPSEAL* Automotive Plug Connector and Header Assembly Application Specification 24 SEP 97 Rev E All dimensions are given in millimeters unless otherwise specified. All dimensional tolerances are +0.2
More informationHow To Build A Powerline Box Powerline Generator
Quick Reference Guide DYNAMIC Series Dynamic Series is a broad product family that provides connector solutions ranging from signal level circuitry through power circuit connectivity in a ruggedized, industrialized
More informationXG2. Flat Cable Connectors for PCBs. Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring. Terminal Arrangement
Flat Cable Connectors for PCBs XG2 Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring IDC connections allow you to wire all terminals at once without terminating the cable. Can
More informationRutenbeck Network Connection Box Cat. 5, shielded. Cable installation. UAE Connection Box Cat. 5 Operating Instructions.
Rutenbeck Network Connection Box Cat. 5, shielded 1-gang, 1 x 8-pole Order No.: 0180 00 2-gang, 2 x 8-pole Order No.: 0178 00 1-gang, (especially for channel construction) Order No.: 0802 00 2-gang, (especially
More informationTHE KNX IP CONTROLLER. Taking Proven Technology to the Next Level
THE KNX IP CONTROLLER Taking Proven Technology to the Next Level THE WAGO KNX PORTFOLIO KNX KNX IP Controller High Performance The user-programmable KNX IP Controller is the multitalented device for building
More informationHARAX circular connector
Show navigation HARAX circular connector Technical characteristics Specifications IEC 60 352-4 IEC 60 9475-2 Approvals HARAX M8-S/M12-S Rated voltage Rated current Diameter of individual strands Conductor
More informationElectronic housing BC for distributor boards
Electronic housing BC for distributor boards The requirements of modern building automation grow constantly and change with regard to comfort, control, intelligent linking of systems and their communication
More informationProcess Automation. Food
Process Automation Food Contents WAGO Process Automation 4-5 WAGO-I/O-SYSTEM 750 6-7 WAGO SPEEDWAY 767 8-9 TO-PASS Telecontrol Solutions 10-11 JUMPFLEX, 857 Series 12-13 TOPJOB S Rail-Mounted Terminal
More information0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
More informationUniversal MATE-N-LOK Connector System
Universal MATE-N-LOK Connector System 2011 Tyco Electronics Corporation. All Rights Reserved. MATE-N-LOK, TE Connectivity, TE Connectivity (logo) and TE (logo) are trademarks. Other logos, products and/or
More informationHOT BAR REFLOW SOLDERING FUNDAMENTALS. A high quality Selective Soldering Technology
HOT BAR REFLOW SOLDERING FUNDAMENTALS A high quality Selective Soldering Technology Content 1. Hot Bar Reflow Soldering Introduction 2. Application Range 3. Process Descriptions > Flex to PCB > Wire to
More informationHARTING Ethernet Cabling 4-poles Overview
Ethernet Cabling 4-poles Overview RJ45 Connectors [on page 8] System cables [on page 10] Distribution modules and Outlets [on page 20] Connectors [on page 22] System cables [on page 24] Panel feed-throughs
More informationQuick Reference Guide Euro Style Terminal Blocks
Quick Reference Guide Euro Style terminal block connectors feature various wire termination methods including rising cage clamp, wire protector, spring, IDC and crimp snap. The design of terminal block
More informationLO5: Understand commercial circuit manufacture
Unit 6: Circuit simulation and manufacture LO5: Understand commercial circuit manufacture Commercial component and PCB types Instructions and answers for teachers These instructions should accompany the
More informationFlux CCT. CRI SDCM (lm) (K) (V) (ma) (W) (lm/w)
www.osram.com PrevaLED Flex Linear Pre-assembled connector every 1ft (281mm) Dimension (l x w x h): 5620mm x 40mm x 5mm on a reel Features Module efficacy: up to 153 lm/w Luminous flux: 1100 lm at 281
More information1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
NEW mm Pitch Double Rows Low Profile Board-to-Cable Connectors DF series Cable.4 Socket DF- **DS-C.8 DFF(G)- **DP-V Pin Header DF- **DS-C Socket Cable 6. PCB DFF **DP-H. Pin Header PCB Features. Contact
More informationCable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
More informationSTEP-PS/1AC/12DC/1.5. Extract from the online catalog. Order No.: 2868567. DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase
Extract from the online catalog STEP-PS/1AC/12DC/1.5 Order No.: 2868567 DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase Commercial data EAN 4046356292924 Pack 1 pcs. Customs tariff
More informationReport. Soldering Tests at COM Express Connectors, Type Receptacle and Plug. Order: Bergwerkstraße 50 D 86971 Peiting. Your Order-No.
Zentrum für Verbindungstechnik in der Elektronik Argelsrieder Feld 6 82234 Oberpfaffenhofen-Weßling Telefon: 081 53 / 403-0 Telefax: 081 53 / 403-15 Report Order: Soldering Tests at COM Express Connectors,
More informationHARTING Ethernet Cabling 4-poles Overview
Overview RJ45 Connectors [on page 8] System cables [on page 10] Distribution modules and Outlets [on page 20] HARTING PushPull Connectors [on page 22] System cables [on page 24] Panel feed-throughs [on
More informationFortimo LED Line Gen3
LED Line 1 ft 1100 lm 1R LV3 Datasheet Fortimo LED Line Gen3 Fortimo LED Line systems are designed to produce pure white light for general lighting applications with high efficiency levels. The Fortimo
More informationHARTING. Electronic Connectors
HARTING Electronic Connectors HARTING Electronic Connectors Global Innovative Technology The HARTING Technology Group has established a reputation for excellence and innovation with decades of experience
More informationZIF Connector & Flat Flexible Cable
ZIF Connector & Flat Flexible Cable 09/08-1 ZIF Connector & Flat Flexible Cable As the demand for higher density in electronic equipment increases, the use of Flexible Flat Cable (FFC) or Flexible Printed
More informationProduct Information. HMC 6 Hybrid Motor Cable
Product Information HMC 6 Hybrid Motor Cable November 2014 HMC 6 Single-cable solution for servo drives Motors normally need two separate cables: One cable for the motor encoder One cable for the motor
More informationIEC Connectors. Introduction
Introduction IEC Connectors A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN 60320 specifications carrying UL, CSA, VDE and other approvals. With electrical ratings
More informationFeed-through terminal blocks for high-current applications
596 PHOENIX CONTACT With the feed-through terminal blocks, you can freely select the connection technology. Choose between traditional screw connection, robust bolt connection, and convenient push-in connection
More informationWE-LF SMD Common Mode Power Line Choke
A Dimensions: [mm] B Recommended hole pattern: [mm] D Electrical Properties: Properties Test conditions Value Unit Tol. Inductance 10 khz/ 0.1 ma L 2x 6.8 mh ±30% Rated current @ 70 C I R 1.0 A max. DC
More information400 Series Buccaneer BUCCANEER POWER. bulgin
bulgin BUCCANEER FOR POWER Contact Retainer Sealing Gasket O Ring Contacts Locking Ring Retaining Nut Panel Body Contacts Contact Carrier O Ring Main Body Cable Gland Collet Gland Nut Sealed to IP68 when
More informationUser Guide Reflow Toaster Oven Controller
User Guide Reflow Toaster Oven Controller Version 1.5-01/10/12 DROTEK Web shop: www.drotek.fr SOMMAIRE 1. Introduction... 3 2. Preparation of THE REFLOW CONTROLLER... 4 2.1. Power supply... 4 2.2. USB
More informationBlock width on rail (mm) Standard block* is shown on blue background
How To Read Terminal Block Specifications How To Read Carton Labels Rated wire size (mm ) Mounting on multiple rail Spacing on rail Spacing 6 mm + 0,05 (.3") M /6 Block width on rail (mm) Standard block*
More informationDigital input modules
8 172 TX-I/O Digital input modules TXM1.8D TXM1.16D Two fully compatible versions: TXM1.8D: 8 inputs, each with a three-color LED (green, yellow or red) TXM1.16D: As TXM1.8X, but 16 inputs, each with a
More informationMCD 1,5/ 4-G1-3,81. Extract from the online catalog. Order No.: 1843091
Extract from the online catalog MCD 1,5/ 4-G1-3,81 Order No.: 1843091 The figure shows a 10-position version of the product Header, Nominal current:, Nom. voltage: 160 V, Pitch: 3.81 mm, Number of positions:
More informationMeasuring of the Temperature Profile during the Reflow Solder Process Application Note
Measuring of the Temperature Profile during the Reflow Solder Process Application Note Abstract With reference to the application note Further Details on lead free reflow soldering of LEDs the present
More informationSMD Power Elements Design Guide. 50 A SMD Technology Small Size High Current
SMD Power Elements Design Guide 50 A SMD Technology Small Size High Current Contents Surface Mount Technology & Assembly Surface Pad Geometry & Stencil Technical Data Qualification Reliability Test 2 www.we-online.com
More informationWAGO PFC 750-8xx Interface to Horner HMI Application note
WAGO PFC 750-8xx Interface to Horner HMI, English Version 1.0.0 2 General Copyright 2003 by WAGO Kontakttechnik GmbH All rights reserved. WAGO Kontakttechnik GmbH Hansastraße 27 D-32423 Minden Phone: +49
More informationMasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - 39 Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy ejection by plastic
More information11mm Size Metal Shaft Type
ncoder 11mm Size Metal Shaft 1 Series Compact and highly reliable type available in many varieties. NW Features Compact and highly accurate sliding contact type encoder. 1.mm-travel push switch with compliance
More informationOutdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Outdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series Optical FO-BH Series (Compact Type) CONNECTOR
More informationFieldbus Dependent I/O Module PROFIBUS
PROFIBUS Manual Technical Description, Installation and Configuring -/000-00 Version.0.0 ii General Copyright 00 by WAGO Kontakttechnik GmbH All rights reserved. WAGO Kontakttechnik GmbH Hansastraße D-
More informationPositronic Provides Complete Capability
Catalog C-017 Rev H Experience Founded in 1966 Involvement in the development of international connector specifications through EIA, IEC and ISO as well as PICMG. Introduction of new and unique connector
More informationMachine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
More informationProduct and functional description
Product and functional description The KNX / DALI gateway N 141/02 is a 4 MU wide, DINrail mounted KNX device with one DALI interface to which up to 64 DALI actuators (e.g. DALI ballasts) can be connected
More informationProduct Specification
Product Specification Model No.: DC-240-L01-00-TR Description: H=3.00mm Horizontal SMD DC Power Jacks Pin Shaft Diameter: 0.65mm Packing Method: Tape & Reel (600pcs./R) 1. General 1a. Scope The jacks should
More information0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors.
0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors. FH Series (51pos. type) 3.45mm 17.1mm 0.9mm Features 1. Extremely light weight The largest version, with all contacts
More informationERNI Electronic Solutions
ERNI Electronic Solutions Development and production of electronic assemblies www.erni-es.com Catalog E 074599 07/10 Edition 1 Welcome to ERNI Electronic Solutions! Your specialist for electronics development,
More informationCurrent and Energy. Measurement Technology
Current and Energy Measurement Technology Current Measurement and Evaluation WAGO s Solution for Energy Monitoring and Conservation Rogowski Coils, 855 Series Conversion of AC currents up to 500 A/2000
More informationFP2 Relay. The Best Relaytion
The Best Relaytion 2 pole telecom / signal relay Through Hole Type (THT) Polarized. Relay types: non-latching with1 coil latching with 1 coil latching with 2 coils Features Telecom / signal relay (dry
More informationPC 4/ 2-ST-7,62. Extract from the online catalog. Order No.: 1804904
Extract from the online catalog PC 4/ 2-ST-7,62 Order No.: 1804904 The figure shows a 5-pos. version of the product Plug component, Nominal current: 20 A, Nom. voltage: 400 V, Pitch: 7.62 mm, Number of
More informationEPIC CIRCON M23 Series Circular Signal Connectors
Circular Signal Connectors CIRCON M2 circular signal connectors are designed to DIN specification N698 and have a standard M2 threaded connection housing. They are offered in coupler, connector, and panel
More informationwww.tvsat.com.pl COAXICON Series Mobile Phone Switching Coax Connectors RF Coax Connectors Product Facts
COXICON Series Mobile Phone Switching Coax Connectors Product Facts ble to switch RF signal from internal to external antenna SMD component for standard pick & place Up to 2.4 GHz Up to 30,000 life cycles
More informationExample of use: Fuse for a solenoid valve. If the fuse is defective, no information is sent to the electronic component.
Overview Switch and button modules The dimensions of the switch and button modules are adapted to the electronic components in the integral housing. The modules are equipped with the universal clip-on
More information12-position General-purpose Vertical Type. General-purpose type switch applicable to a wide range of electronic devices. Typical Specifications
SRRM -position General-purpose Vertical Type Product Line Poles 3 Positions Endless 4 4 3 General-purpose type switch applicable to a wide range of electronic devices hangeover angle 30±3 hangeover timing
More informationSlimSeal SSL Connector. Now Available in 1 Position. Free Hanging Version
Now Available in 1 Position Free Hanging Version SlimSeal SSL Connector The SlimSeal SSL connectors are low profile, single row connectors developed for indoor and outdoor LED lighting applications. These
More informationPOLARIS INSUL-TAP CONNECTORS FOR TWO WIRES & IN-LINE SPLICERS/REDUCERS
INSUL-TAP CONNECTORS FOR TWO S & IN-LINE SPLICERS/REDUCERS IT SERIES 1 2 3 4 Insul-Tap connectors are suitable for connecting two wires. For sizes 3/0 AWG and smaller, they are available in two styles
More informationTrident Connector Family Offers the Versatility and Reliability Required in Industrial & Transportation Applications
Trident Connector Family Offers the Versatility and Reliability Required in Industrial & Transportation Applications Industrial and transportation applications require robust connections with superior
More informationPC 4/ 5-STF-7,62. Extract from the online catalog. Order No.: 1828278
Extract from the online catalog PC 4/ 5-STF-7,62 Order No.: 1828278 The figure shows a 5-pos. version of the product Plug component, Nominal current: 20 A, Nom. voltage: 400 V, Pitch: 7.62 mm, Number of
More informationMedium voltage insulator
Medium voltage insulator Line post insulators type R-ET Commercial designation LPI 24 N ET 1) LPI 24 L ET/5 1)2) LPI 24 L ET/6 1)2) LPI 38 L ET 1) esignation acc. to IEC 720 R 12,5 ET 125 N R 12,5 ET 125
More informationINNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION.
CONNECTORS 2014 INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION. Stelvio Kontek S.p.A. is one of the leading groups in the connectors market. With a solid background in the sector and having
More informationSurface Mount LEDs - Applications Application Note
Surface Mount LEDs - Applications Application Note Introduction SMT Replaces Through Hole Technology The use of SMT-TOPLED varies greatly from the use of traditional through hole LEDs. Historically through
More information