Product Description: Phosphorus Test Tablet Manufactured By: LaMotte Company 802 Washington Avenue Chestertown, MD PEL. 2 mg/m³ as Sn (TWA)

Transcription

1 MSDS P.O. Box Washington Avenue Chestertown, MD USA MATERIAL SAFETY DATA SHEET TELEPHONE # FOR INFORMATION HOUR EMERGENCY NUMBER (CHEM-TEL): USA, Canada, Puerto Rico ; Outside rth American Continent (call Collect) 1. Product Identification Product Code: 5706 Product Description: Phosphorus Test Tablet Manufactured By: LaMotte Company 802 Washington Avenue Chestertown, MD Composition/Information On Ingredients Hazard CAS#/Name % PEL TLV Stannous Chloride Dihydrate 5 2 mg/m³ as Sn (TWA) 2 mg/m³ as Sn (TWA) mg/m³ (dust) 10 mg/m³ 3. Hazards Overview Primary Route Of Entry: Skin Ingestion May irritate eyes and skin. Ingestion of large quantities may cause gastrointestinal irritation and circulatory problems. HMIS Hazard Scale: 4 = Extreme, 3 = High, 2 = Moderate, 1= Slight, 0 = Least Health: 1 Flammability: 0 Reactivity: 1 Carcinogenicity: ne: Other Health Related Comments: Tablets are acidic in water (ph3) and may irritate mouth and throat if swallowed, or irritate skin if handled repeatedly. See Section 11. 1

2 4. First Aid Measures Eye Contact: Skin Contact: Ingestion: Inhalation: Flush thoroughly with water while lifting upper and lower eyelids. Consult physician. Flush skin thoroughly with water. Wash with soap and water. Consult physician if irritation develops. Drink large quantity of water. If more than a few tablets have been ingested consult physician. Remove to fresh air. 5. Fire Fighting Measures Flash Point (Method Used): LEL: UEL: Extinguishing Media: Special Fire Fighting Procedures: Unusual Fire & Explosion Hazard: t a fire hazard 6. Accidental Release Measures Sweep up in a manner that does not crush tablets and/or generate dust. Containerize and hold for dispoal according to federal, state, and local regulaton. If permitted, dissolve in water and flush to drain with excess water. 7. Handling & Storage Keep in a tightly closed container. Store in a cool, dry, area away from moisture and incompatible materials. 2

3 8. Exposure Controls/Personal Protection Ventilation rmal Protection When Handling Eye Protection Gloves Work/Hygenic Practices: Wash after handling 9. Physical & Chemical Properties Appearance: White Tablet Solubility In Water: Soluble Odor: ne ph: 3 (1 tablet/10ml water) Vapor Density: Vapor Pressure: Boiling Point: Melting Point: ca. 750 C 10. Stability & Reactivity Stable: Conditions To Avoid: Incompatibility (Materials To Avoid): Hazardous Decomposition Products: Heat, moisture 11. Toxicological Information Oral rat LD50: 700 mg/kg for stannous chloride, anhydrous mg/kg for potassium chloride. Stannous Chloride dihydrate investigated as a mutagen, reproductive effector. KCl investigated as a mutagen. Target Organs: GI System Skin Pre-Existing Conditions Aggravated By Exposure: Persons w/ impaired kidney function 3

4 12. Ecological Information Information t Yet Available 13. Disposal Considerations Dispose according to federal, state, and local regulations. 15. Regulatory Information Hazard Ingredient USA TSCA Chemical Inventory Status Europe --- Canada --- EC DSL NDSL Australia Japan Federal, State, & International Regulations --- SARA SARA RCRA TSCA Ingredient RQ TPQ Listed Chemical Category CERCLA (D)

5 --- SARA 311/ Hazard Categories Ingredient Acute Chronic Fire Pressure Reactivity Australia Hazchem Poison Code Schedule ne Allocated ne Allocated This MSDS Is WHMIS Compliant ne Allocated ne Allocated product 5706 ne Allocated ne Allocated as a whole 16. Other Information Keep out of reach of children. Prepared By: Revised: Regulatory Affairs Department 9/4/2009 5