THE SYSTEMS ENGINEERING MAJOR AT A GLANCE
|
|
|
- Nancy McCoy
- 9 years ago
- Views:
Transcription
1 SYSTEMS ENGINEERING THE SYSTEMS ENGINEERING MAJOR AT A GLANCE: Systems Engineering is a broad discipline that addresses the development of large, complex systems. The system engineer (SE) designs, integrates, and helps to ensure smooth functioning of complex systems typical in today s high-tech Air Force. The SE is a full lifecycle engineer, always keeping an eye on the design of the overall system to ensure that it will meet the needs of all the system s stakeholders, including operators, maintainers and commanders, and our ultimate customer -- the American public! The SE must consider the entire lifecycle of the system: design, development, verification, manufacturing, deployment, training, operations, support, and disposal. Therefore, SEs must have engineering competence augmented by studies in human factors engineering, operations research, system simulation, and program management. Systems Engineering (SE) is an interdisciplinary major supported by the USAFA Systems Engineering Board (SEB). Membership of the SEB is comprised of the Heads of the Departments of Aeronautical Engineering, Astronautical Engineering, Behavioral Sciences and Leadership, Computer Science, Electrical and Computer Engineering, Engineering Mechanics and the Department of Management as well as the SE Program Director. The Department of the elected Chairman of the SEB provides administrative support to the SE Program. Cadets who successfully complete the Systems Engineering program are awarded a Bachelor of Science in Systems Engineering accredited by the Engineering Accreditation Commission of ABET, To ensure the success of our graduates, we prepare them to attain the following Program Educational Objectives two to five years after graduation: 1) Recognition as successful Air Force officers through demonstration of their ability to: o Rapidly acquire required knowledge, o Lead others effectively, o Effectively apply ethical and moral standards, o Improve unit performance by application of organizational skills, o Make sound decisions based on critical thinking, and o Communicate effectively. 2) Selection for career training on, or ahead of, schedule and for a progression of assignments of increasing responsibility 3) A demonstrated ability to solve Air Force technical problems 4) Success in continuing education. To support these goals, our program s curriculum is designed such that, by completion of our program, our graduates shall demonstrate that they have attained the following Student Outcomes: 1) an ability to apply knowledge of mathematics, science, and engineering 2) an ability to design and conduct experiments, as well as to analyze, and interpret data 207
2 3) an ability to design a system, component, or process to meet desired needs within realistic constraints such as economic, environmental, social, political, ethical, health and safety, manufacturability, and sustainability 4) an ability to function on multi-disciplinary teams 5) an ability to identify, formulate, and solve engineering problems 6) an understanding of professional and ethical responsibilities of military officers and systems engineers 7) an ability to communicate effectively 8) the broad education necessary to understand the impact of engineering solutions in a global, economic, environmental, military, and societal context 9) a recognition of the need for, and an ability to engage in life-long learning 10) a knowledge of contemporary issues and the role of military officers in our global society 11) an ability to use the techniques, skills, and modern engineering tools necessary for systems engineering practice. COURSE REQUIREMENTS: 146 semester hours A. 96 Semester hours of Dean's academic core courses including the following core alternates: Required Core Substitute Substitutes for Ops Rsch 310 Systems Analysis Energy Systems Opt ECE 231 Electrical Circuits and Systems I ECE 315 Math 356 Prob. & Stats. for Engineers and Scientists Math 300 Sys Engr 301 Project Management Mgt 400 B. 5 Semester hours of Director of Athletics core courses. C. 3 Semester hours of Academy Option (Comp Sci 211 for accreditation requirements). D. 6 Semester hours of math courses 1. Math 344 or Math 359, Math 243, or Math 253 E. 18 Semester hours of major's courses: 1. Sys Engr 310 Introduction to Systems Engineering 2. Sys Engr 311 Decision Analytics for Systems Development 3. Ops Rsch 312 Probabilistic Models 4. Sys Engr 336 Engineering Economics and Financial Management 5. Beh Sci 373 Introduction to Human Factors Engineering 6. Sys Engr 477 Operations Engineering and Management Seminar courses: Sys Engr 405 Systems Engineering Colloquium I Sys Engr 406* Systems Engineering Colloquium II 208
3 * In addition, Sys Engr 402 Professional Systems Engineering Development (ASEP exam prep) is a recommended course for all Systems Engineering cadets to take concurrently with Sys Engr 406 F. 12 Semester hours of courses selected from the cadet s choice of depth option area: The available course list for each depth option is managed and vetted by the respective host departments. Cadets will take a set of four courses from any one named depth area or a coherent set of four courses from the below options with approval of the systems engineering program director. The four courses shall include a minimum of 6 engineering semester credits, as defined by the Engineering Accreditation Commission of ABET. A superscript M denotes a course that is mandatory for any cadet taking courses in the respective named depth option area. Aeronautical: Engr Mech 320 Aero Engr 241 Aero Engr 341 Aero Engr 351 Aero Engr 352 Aero Engr 361 Aero Engr 456 Astronautical: Engr Mech 320 Aero Engr 241 Astro Engr 321 Astro Engr 331 Astro Engr 351 Astro Engr 423 Computer: Comp Sci 210 Comp Sci 220 Comp Sci 351 Comp Sci 364 Comp Sci 467 Electronics: ECE 281 ECE 321 ECE 322 ECE 332 ECE 348 ECE 382 ECE 383 Dynamics Aero-Thermodynamics M Aeronautical Fluid Dynamics Aircraft Performance and Static Stability Aircraft Dynamic Stability and Control Propulsion I Flight Test Techniques Dynamics M Aero-Thermodynamics Intermediate Astrodynamics Space Systems Engineering Rocket Propulsion Space Mission Design Introduction to Programming M Data Abstraction Computer Organization and Architecture Information Storage and Retrieval Computer Networks Digital Design and Computer Architecture M Electronics I Electronics II Electrical Circuits and Systems II Telecommunications Principles Embedded Computer Systems I Embedded Computer Systems II 209
4 ECE 387 ECE 434 ECE 485 Engr 311 Human Factors: Beh Sci 375 Sys Engr 470 Beh Sci 471 Beh Sci 473 Introduction to Robotic Systems Digital Signal Processing Advanced Computer Architecture Electrical Power Human Factors in Aviation Systems Engineering Human Systems Integration Engineering Psychology Human Factors Engineering in Systems Design Mechanical: Engr Mech 330 Mechanics of Deformable Bodies M Any three (3) additional, 3-credit hour courses currently offered within the Mechanical Engineering curriculm that form a coherent set of courses. The courses deemed within the Mechanical Engineering curriculum include all Mech Engr and Engr Mech courses, plus additional courses considered part of certain Mechanical Engineering emphasis areas (e.g., Engr 341, Aero Engr 436, etc.) as shown in Table 10-1, Mechanical Engineering Emphasis Areas. The coherent set of courses should, in principle, fall within one of these traditional Mech Engr emphasis areas. The cadet will choose the courses in coordination with the cadet s advisor with approval by the DFEM Deputy for Curriculum. Any courses selected outside of the current Mechanical Engineering curriculum require DFEM Department Head approval. G. 6 Semester hours of Capstone Courses Sys Engr 491 Sys Engr 492 Systems Engineering Capstone Design I Systems Engineering Capstone Design II To satisfy the Systems Engineering Capstone Design sequence requirement, cadets will enroll in Sys Engr 491/Sys Engr 492 and be assigned to one of the following two-semester capstone design options based on interest, depth option selection, and capstone needs. SE Capstone (fall) Design Focus Embedded within Domain Capstone Host Department SE491A Aircraft & Jet Engines Aero Engr 481 DFAN SE491B Spacecraft Astro Engr 436 DFAS SE491BL Human Systems Sys Engr 491BL DFBL SE491C Software Comp Sci 453 DFCS SE491E Electronic/Computer ECE 463 DFEC SE 491H Mechanical Mech Engr 491 DFEM SE 491M Tech Innovation Mgt 419 DFM SE491S Various Systems Sys Engr 491S DFSE SE Capstone Design Focus Embedded within Host (spring) Domain Capstone Department SE492A Aircraft Aero Engr 482 DFAN 210
5 SE492A1 Jet Engines Aero Engr 483 DFAN SE492B Spacecraft Astro Engr 437 DFAS SE492BL Human Systems Sys Engr 492BL DFBL SE492C Software Comp Sci 454 DFCS SE492E Electronic/Computer ECE 464 DFEC SE 492H Mechanical Mech Engr 492 DFEM SE 492M Tech Innovation Mgt 420 DFM SE492S Various Systems Sys Engr 492S DFSE Domain capstone course titles: Aero Engr 481 Intro to Aircraft and Propulsion System Design Aero Engr 482 Aircraft Design Aero Engr 483 Aircraft Engine Design Astro Engr 436 Small Spacecraft Engineering I Astro Engr 437 Small Spacecraft Engineering II Comp Sci 453 Software Engineering I Comp Sci 454 Software Engineering II ECE 463 Capstone Design Project I ECE 464 Capstone Design Project II Mech Engr 491 Capstone Design Project I Mech Engr 492 Capstone Design Project II Mgt 419 Technological Innovation Management Mgt 420 Management Capstone Practicum 211
6 SUGGESTED COURSE SEQUENCE Systems Engineering Major Fall 4 o hrs per 3 o hrs per 2 o hrs per 1 o hrs per Math Law Math MSS Engr English ECE Biology Comp Sci Econ Beh Sci Beh Sci English Engr Mech Comp Sci Sys Engr For Lang Physics Sys Engr Depth Option Phy Ed Pol Sci Depth Option Sys Engr Phy Ed 1 2 Phy Ed 1 2 Sys Engr Phy Ed Math Aero Engr 315 or Sys Engr Soc Sci Physics MSS History Astro Engr History Chem Ops Rsch English Beh Sci Ops Rsch Sys Engr Philos Spring Chem Math 344 or Math 359 or Depth Option For Lang Sys Engr Depth Option Sys Engr Phy Ed Phy Ed Phy Ed Sys Engr 406/ Phy Ed Course Unit Summary Semester Hour Summary Core (32) Core = 96.0 Sem Hours Major (14) Major = 42.0 " Academy Option (1) Academy Option = 3.0 " Phy Ed (10) Phy Ed = 5.0 " Total = " 212
MECHANICAL ENGINEERING
MECHANICAL ENGINEERING THE MECHANICAL ENGINEERING MAJOR AT A GLANCE: If you want to design and build things, then you should consider majoring in Mechanical Engineering. Mechanical Engineering is, more
Bachelor of Science in Computer Engineering (BSCoE) Essential Ideas
Mission Statement Bachelor of Science in Computer Engineering (BSCoE) Essential Ideas The mission statement for the Computer Engineering program as modified and adopted by the engineering faculty on July
Aerospace Engineering
West Virginia University 1 Aerospace Engineering Aerospace Engineering Aerospace travel, space exploration, and flight of manned or unmanned vehicles continue to gain significance. Aerospace engineering
ERAU Aerospace Engineering Program Educational Objectives and Student Outcomes
ERAU Aerospace Engineering Program Educational Objectives and Student Outcomes Our Aerospace Engineering (AE) Program is accredited by the Engineering Accreditation Commission (EAC) of the Accreditation
Mechanical Engineering (BS)
UNIVERSITY OF SOUTH ALABAMA MECHANICAL ENGINEERING (BS) 1 Mechanical Engineering (BS) Degree Requirements First Year EH 101 MA 125 4 hrs CH 131 4 hrs EG 101 2 hrs Gen Ed* Spring 17 EH 102 MA 126 4 hrs
Department of Electrical and Computer Engineering Naval Postgraduate School Monterey, California
Department of Electrical and Computer Engineering Naval Postgraduate School Monterey, California Undergraduate Education Evaluation Form The Department of Electrical and Computer Engineering at the Naval
The Department of Mechanical and Aerospace Engineering
The Department of Mechanical and Aerospace Engineering Mechanical Engineering and Aerospace Engineering 204 Woolf Hall Box 19023 817-272-2561 www.uta.edu/mae Overview The Department of Mechanical and Aerospace
Undergraduate Curriculum Manual
Undergraduate Curriculum Manual for the Bachelor of Science Degree in Civil Engineering University of Kansas June 2014 THE UNIVERSITY OF KANSAS DEPARTMENT OF CIVIL, ENVIRONMENTAL AND ARCHITECTURAL ENGINEERING
Computer Engineering Undergraduate Handbook. Bachelor of Science in Computer Engineering
Computer Engineering Undergraduate Handbook Revised 2/10 Bachelor of Science in Computer Engineering Presented by the Computer Science Department and the Charles L. Brown Department of Electrical & Computer
CIVIL ENGINEERING UNDERGRADUATE GUIDE
CIVIL ENGINEERING UNDERGRADUATE GUIDE BACHELOR OF SCIENCE IN CIVIL ENGINEERING (BS CE) THE UNIVERSITY OF KANSAS CEAE DEPARTMENT Revised August 2015 THE UNIVERSITY OF KANSAS DEPARTMENT OF CIVIL, ENVIRONMENTAL
Electrical and Computer Engineering Undergraduate Advising Manual
Electrical and Computer Engineering Undergraduate Advising Manual Department of Engineering University of Massachusetts Boston Revised: October 5, 2015 Table of Contents 1. Introduction... 3 2. Mission
SCHOOL OF ENGINEERING Baccalaureate Study in Engineering Goals and Assessment of Student Learning Outcomes
SCHOOL OF ENGINEERING Baccalaureate Study in Engineering Goals and Assessment of Student Learning Outcomes Overall Description of the School of Engineering The School of Engineering offers bachelor s degree
MECHANICAL ENGINEERING (Bachelor of Science)
Mechanical Engineering / 132 MECHANICAL ENGINEERING (Bachelor of Science) Home Department: Department Head: Mechanical Engineering Craig J. Hoff, Ph.D. Room 2-103 MC, 810-762-7833 [email protected] Program
Computer Engineering
Undergraduate Program Guide Bachelor of Science in Computer Engineering 2014-2015 DEPARTMENT OF COMPUTER SCIENCE and ENGINEERING The University of Texas at Arlington 500 UTA Blvd. Engineering Research
The University of Connecticut. School of Engineering COMPUTER SCIENCE GUIDE TO COURSE SELECTION AY 2015-2016. Revised July 27, 2015.
The University of Connecticut School of Engineering COMPUTER SCIENCE GUIDE TO COURSE SELECTION AY 2015-2016 Revised July 27, 2015 for Computer Science (CSci) Majors in the School of Engineering Table of
Software Engineering
Undergraduate Program Guide Bachelor of Science in Software Engineering 2014-2015 DEPARTMENT OF COMPUTER SCIENCE and ENGINEERING The University of Texas at Arlington 500 UTA Blvd. Engineering Research
Computer Engineering (BS)
UNIVERSITY OF SOUTH ALABAMA COMPUTER ENGINEERING (BS) 1 Computer Engineering (BS) Degree Requirements First Year MA 125 CH 131 CH 131L EH 101* EG 101 2 hrs Gen Ed Spring 17 MA 126 EH 102 PH 201 CIS 210
OREGON INSTITUTE OF TECHNOLOGY Mechanical Engineering Program Assessment 2007-08. October 16, 2008 INTRODUCTION PROGRAM MISSION STATEMENT
OREGON INSTITUTE OF TECHNOLOGY Mechanical Engineering Program Assessment 2007-08 October 16, 2008 INTRODUCTION The Mechanical Engineering Program within the Mechanical and Manufacturing Engineering and
ELECTRICAL ENGINEERING
ELECTRICAL ENGINEERING UNDERGRADUATE STUDENT HANDBOOK For Academic Year 2011 2012 Department of Electrical Engineering and Computer Science L.C. Smith College of Engineering and Computer Science Syracuse
1. Professional employment in areas such as the medical device industry, engineering consulting, and biotechnology;
Class Years 2017 and Beyond Undergraduate Program The objectives of the undergraduate program in biomedical engineering are as follows: 1. Professional employment in areas such as the medical device industry,
ELECTRICAL ENGINEERING
The University of Connecticut School of Engineering ELECTRICAL ENGINEERING GUIDE TO COURSE SELECTION AY 2008-2009 Revised July 30, 2008 for Electrical Engineering (EE) Majors in The School of Engineering
ELECTRICAL ENGINEERING
The University of Connecticut School of Engineering ELECTRICAL ENGINEERING GUIDE TO COURSE SELECTION AY 2013-2014 Revised January 31, 2014 for Electrical Engineering (EE) Majors in The School of Engineering
Aerospace Engineering
West Virginia University 1 Aerospace Engineering Degrees Offered Masters of Science, Aerospace Engineering (M.S.A.E.) Doctor of Philosophy, Aerospace Engineering (Ph.D.) Educational objectives of the departmental
STUDENT HANDBOOK WKU/UK JOINT BACHELOR OF SCIENCE PROGRAM IN MECHANICAL ENGINEERING AUGUST 2010
STUDENT HANDBOOK WKU/UK JOINT BACHELOR OF SCIENCE PROGRAM IN MECHANICAL ENGINEERING DEPARTMENT OF ENGINEERING WESTERN KENTUCKY UNIVERSITY EBS 2101 BOWLING GREEN, KY 42101 WWW.WKU.EDU/ENGINEERING AUGUST
Proposed Change to ABET Software Engineering Program Criteria CSAB Criteria Committee, 1 March 2014
Proposed Change to ABET Software Engineering Program Criteria CSAB Criteria Committee, 1 March 2014 Introduction The ABET software engineering program criteria supplement the Engineering Accreditation
Computer Engineering (COE) PROGRAM LEARNING OUTCOMES (10/19/09) Students completing the Computer Engineering program should be able to demonstrate:
Mission Statement The Department of Electrical and Computer Engineering has the following mission statement, as presented on the department website (http://www.engr.uky.edu/ece/general/missionvision.html).
Undergraduate Degree Map for Completion in Four Years
Page 1 of 8 Undergraduate Degree Map for Completion in Four Years College: College of Science, Engineering & Technology Department: Elec. & Computer Engineering Name of Program: ELECTRICAL ENGINEERING
COMPUTER SCIENCE AND ENGINEERING
The University of Connecticut School of Engineering COMPUTER SCIENCE AND ENGINEERING GUIDE TO COURSE SELECTION AY 2013-2014 Revised May 23, 2013 for Computer Science and Engineering (CSE) Majors in the
ENGINEERING PHYSICS I. JUSTIFICATION
ENGINEERING PHYSICS An Interdisciplinary Program Jointly Offered by the School of Engineering and the Department of Physics, College of Liberal Arts and Sciences I. JUSTIFICATION Technology is a driving
Department of Electrical and Computer Engineering
Department of Electrical and Computer Engineering Brian K. Johnson, Dept. Chair (214 Buchanan Engr. Lab. 83844-1023; phone 208/885-6554; www.ece.uidaho.edu). Faculty: Touraj Assefi, David H. Atkinson,
Electrical Engineering (BS) - General Track
UNIVERSITY OF SOUTH ALABAMA ELECTRICAL ENGINEERING (BS) - GENERAL TRACK 1 Electrical Engineering (BS) - General Track Degree Requirements First Year MA 125 CH 131 CH 131L EH 101* EG 101 2 hrs Gen Ed MA
Proposal for New Program: Minor in Data Science: Computational Analytics
Proposal for New Program: Minor in Data Science: Computational Analytics 1. Rationale... The proposed Data Science: Computational Analytics minor is designed for students interested in signaling capability
Texas A&M University -- College of Engineering -- Department of Computer Science & Engineering Undergraduate Degree Plan in Computer Science (CPSC)
Texas A&M University -- College of Engineering -- Department of Computer Science & Engineering Undergraduate Degree Plan in Computer Science (CPSC) Valid for Fall 2014 Catalog (137) COMPUTER SCIENCE MATH
Undergraduate Program Guide. Bachelor of Science. Computer Science 2015-2016. DEPARTMENT OF COMPUTER SCIENCE and ENGINEERING
Undergraduate Program Guide Bachelor of Science in Computer Science 2015-2016 DEPARTMENT OF COMPUTER SCIENCE and ENGINEERING The University of Texas at Arlington 500 UTA Blvd. Engineering Research Building,
BIOMEDICAL ENGINEERING UNDERGRADUATE CURRICULUM
BIOMEDICAL ENGINEERING UNDERGRADUATE CURRICULUM 2014-2015 (as of 4/26/2013) This program is accredited by the Engineering Accreditation Commission of ABET, http://www.abet.org. Undergraduate Program Mission
Assessment Plans. for. Computer Engineering Programs
Plans for Computer Engineering Programs Spring 2015 1 Introduction The CpE B.S and M.S. degree programs at California State University, Sacramento are joint programs supported by both the Computer Science
ASSOCIATE OF SCIENCE DEGREES AND CERTIFICATES
DEGREES AND CERTIFICATES For students who intend to continue their education at a four-year degree granting institution To receive the A.S. degree, students must satisfactorily complete Program requirements.
DEPARTMENT OF MATHEMATICS & COMPUTING
DEPARTMENT OF MATHEMATICS & COMPUTING The Department of Mathematics and Computing provides students with opportunities to earn Bachelor of Science degrees in computer information systems or in mathematics.
School of Management and Information Systems
School of Management and Information Systems Business and Management Systems Information Science and Technology 176 Business and Management Systems Business and Management Systems Bachelor of Science Business
The Department of Electrical Engineering
The Department of Electrical Engineering 517 Nedderman Hall Box 19016 817-272-2671 www.uta.edu/ee 501 Nedderman Hall Student Advising Office [email protected] Accreditation Accreditation is an assurance
College of Business Kim LaFevor, D.B.A. Dean
College of Business Kim LaFevor, D.B.A. Dean Athens State University s College of Business is nationally accredited by the Accreditation Council for Business Schools and Programs (ACBSP), 11520 West 119
DEPARTMENT OF MECHANICAL AND AEROSPACE ENGINEERING
DEPARTMENT OF MECHANICAL AND AEROSPACE ENGINEERING BACHELOR OF SCIENCE IN ENGINEERING DEGREE Major in Aerospace Engineering Freshman Year Class-Lab-Credit Hours CHEM 111 Principles of Chemistry for Engineers
2. EXPLAIN CHANGE TO DEGREE PROGRAM AND GIVE A DETAILED RATIONALE FOR EACH INDIVIDUAL CHANGE:
PROPOSED CHANGES TO THE BACHELOR OF SCIENCE IN ELECTRICAL AND COMPUTER ENGINEERING DEGREE PROGRAM IN THE COCKRELL SCHOOL OF ENGINEERING CHAPTER IN THE UNDERGRADUATE CATALOG 2016-2018 or LAW SCHOOL CATALOG
STUDENT OUTCOMES ASSESSMENT PLAN. Mechanical Engineering Program
STUDENT OUTCOMES ASSESSMENT PLAN Mechanical Engineering Program Department of Mechanical Engineering College of Engineering California State University, Fresno April 2008 Student Outcomes Assessment Plan
Change the requirements for the Management Major and Minor
APC Document 25 (MGMT): Change the requirements for the Management Major and Minor Effective Date: Fall 2015 1. Delete: On pages 200-201: Bachelor of Science in Management The program leading to the B.S.
The Department of Civil Engineering
The Department of Civil Engineering 417 Nedderman Hall Box 19308 817-272-2201 www.uta.edu/engineering/ce Overview: Educational and Professional Career Paths Civil engineering is the oldest and broadest
PROPOSED CHANGES TO THE AEROSPACE ENGINEERING DEGREE PROGRAM IN THE COLLEGE OF ENGINEERING SECTION IN THE UNDERGRADUATE CATALOG 2014-2016
PROPOSED CHANGES TO THE AEROSPACE ENGINEERING DEGREE PROGRAM IN THE COLLEGE OF ENGINEERING SECTION IN THE UNDERGRADUATE CATALOG 2014-2016 Type of Change Academic Change 1. IF THE ANSWER TO ANY OF THE FOLLOWING
The table below summarizes the degree options, majors, and minors offered by the College of Business.
College of Business Kim LaFevor, D.B.A. Dean General Information The Athens State University College of Business is nationally accredited by the Accreditation Council of Business Schools and Programs (ACBSP),
FDU-Vancouver Bachelor of Science in Business Administration International Business Concentration Course Descriptions
FDU-Vancouver Bachelor of Science in Business Administration International Business Concentration Course Descriptions Business Foundational Courses General Education DSCI 1234 Mathematics for Business
1) Chemical Engg. PEOs & POs Programme Educational Objectives
1) Chemical Engg. PEOs & POs Programme Educational Objectives The Programme has the following educational objectives: To prepare students for successful practice in diverse fields of chemical engineering
Bachelor of Science in Aviation Option in Aviation Management
Bachelor of Science in Aviation Option in Aviation Management Last Updated: July 24, 2014 Advising packet: List of courses Course descriptions Academic Planner Major Form GE Worksheet Aviation and Technology
22 University of Hawai i
Applied Business & Information Technology (BAS) 22 University of Hawai i Bachelor of Applied Science (BAS) Degree in Applied Business & Information Technology (ABIT) The Bachelor of Applied Science (BAS)
UNO COLLEGE OF INFORMATION SCIENCE & TECHNOLOGY
UNO COLLEGE OF INFORMATION SCIENCE & TECHNOLOGY 1110 S 67th St Omaha, NE 68182 402.554.3819 www.ist.unomaha.edu Requirements Correspond to Catalog TABLE OF CONTENTS & GENERAL INFORMATION The College of
Virginia Tech s New Practice-Oriented Aerospace Engineering Master s Degree
Session 0502 Virginia Tech s New Practice-Oriented Aerospace Engineering Master s Degree W.H. Mason and B. Grossman Department of Aerospace and Ocean Engineering and Multidisciplinary Analysis and Design
MARITIME COLLEGE UNDERGRADUATE DEGREE CURRICULA. For Students Entering Maritime College During 2014-2015 Academic Year.
MARITIME COLLEGE UNDERGRADUATE DEGREE CURRICULA For Students Entering Maritime College During 2014-2015 Academic Year As of 8/20/2014 2014-15 Degree Curricula Page 1 UNDERGRADUATE DEGREE CURRICULA Bachelor
Approved Program of Study for Undergraduate Minors Georgia Institute of Technology Office of the Registrar 2013-2014 Minor in Energy Systems
Please type or print in ink: Name (first/last): Approved Program of Study for Undergraduate Minors Georgia Institute of Technology Office of the Registrar 2013-2014 Minor in Energy Systems GT Student ID
Samuel Ginn College of Engineering
70 Samuel Ginn College of Engineering ENGINEERS ARE FACED with worldwide problems and expectations awesome in responsibility, yet exciting as professional challenges. These range from the extremes of interplanetary
This Plan of Study Form is for a (Circle One): DECLARATION REVISION
Plan of Study for the Engineering Sciences SB Concentration Bioengineering Track Effective for Students Declaring the Concentration after January 1, 2015 NAME: EMAIL: CLASS: DATE: This Plan of Study Form
UNO COLLEGE OF INFORMATION SCIENCE & TECHNOLOGY
UNO COLLEGE OF INFORMATION SCIENCE & TECHNOLOGY 1110 S 67th St Omaha, NE 68182 402.554.3819 www.ist.unomaha.edu Requirements Correspond to Catalog TABLE OF CONTENTS & GENERAL INFORMATION The College of
Handbook for Undergraduate Students in Electrical and Computer Engineering
Department of Electrical and Computer Engineering Rutgers, The State University of New Jersey. 94 Brett Road. Piscataway, NJ 08854-8058 (848) 445-3262 (848) 445-3127. FAX: (732) 445-2820 Handbook for Undergraduate
The purpose of this text is to provide information on engineering education, both at undergraduate and graduate level and professional licensure in
ENGINEERING EDUCATION IN THE UNITED STATES The purpose of this text is to provide information on engineering education, both at undergraduate and graduate level and professional licensure in engineering
The following are the measurable objectives for graduated computer science students (ABET Standards):
Computer Science A Bachelor of Science degree (B.S.) in Computer Science prepares students for careers in virtually any industry or to continue on with graduate study in Computer Science and many other
BACHELOR OF SCIENCE DEGREE
BACHELOR OF SCIENCE DEGREE GENERAL EDUCATION CURRICULUM and Additional Degree Requirements Engineering Science Brett Coulter, Ph.D. - Director The Engineering Science degree is a wonderful way for liberal
THE BACHELOR OF ARTS DEGREE IN POLITICAL SCIENCE (PSCI)
Department of Social and Behavorial Sciences / 129 THE BACHELOR OF ARTS DEGREE IN POLITICAL SCIENCE (PSCI) The curriculum in Political Science is designed to provide knowledge and understanding of the
The University of Connecticut. School of Engineering COMPUTER SCIENCE GUIDE TO COURSE SELECTION AY 2013-2014. Revised May 23, 2013.
The University of Connecticut School of Engineering COMPUTER SCIENCE GUIDE TO COURSE SELECTION AY 2013-2014 Revised May 23, 2013 for Computer Science (CSci) Majors in the School of Engineering Table of
California State Polytechnic University. Department of Electrical and Computer Engineering ASSESSMENT PLAN. Spring, 2001 - 1 -
California State Polytechnic University Department of Electrical and Computer Engineering ASSESSMENT PLAN Spring, 2001-1 - Table of Contents 1. Introduction 3 2. Goals of assessment in ECE department 3
Electrical and Computer Engineering
Engineering-1 Electrical and Computer Engineering Faculty: Hernandez, Chair, Adegbege, Deese, Katz, Kim, Pearlstein The Department of Electrical and Computer Engineering offers academic programs leading
The table below summarizes the degree options, majors, and minors offered by the College of Business.
College of Business Kim LaFevor, D.B.A. Dean General Information Athens State University s College of Business is nationally accredited by the Accreditation Council for Business Schools and Programs (ACBSP),
Mechanical Engineering Systems BSE at Craven Community College - Havelock
9/2014 Mechanical Engineering Systems BSE at Craven Community College - Havelock Craven Community College Havelock (CCC) is home for NC State s site-based Mechanical Engineering Systems (MES) BSE program
Undergraduate Degree Map for Completion in Four Years
Page 1 of 7 Undergraduate Degree Map for Completion in Four Years College: College of Science, Engineering & Technology Department: Elec. & Computer Engineering Name of Program: COMPUTER ENGINEERING Degree
ELECTRICAL ENGINEERING CURRICULUM. With TLP Courses (02/04/16 revision course number updates, capstone with either SYS or ECE course #)
ELECTRICAL ENGINEERING CURRICULUM With TLP Courses (02/04/16 revision course number updates, capstone with either SYS or ECE course #) NAME FIRST SEMESTER APMA 1110 CHEM 1610 CHEM 1611 ENGR 1620 STS 1010
STUDENT HANDBOOK. Civil, Architectural, and Environmental Engineering
STUDENT HANDBOOK Civil, Architectural, and Environmental Engineering Welcome to the CAEE Department This handbook is intended to support you as an entering and continuing student in the Department of Civil,
ENGINEERING PHYSICS (EE)
The University of Connecticut School of Engineering ENGINEERING PHYSICS (EE) GUIDE TO COURSE SELECTION AY 2003-2004 for Engineering Physics (EngPhys) Majors in the School of Engineering and College of
DOUBLE MAJOR FINANCE AND SPORT MANAGEMENT
DOUBLE MAJOR FINANCE AND SPORT MANAGEMENT FOR STUDENTS ADMITTED TO THE UNIVERSITY AS OF SEPTEMBER 2012 CURRICULUM - Suggested Sequence First Semester Credits Second Semester Credits FRESHMAN YEAR Microeconomics,
Elizabeth City State University Elizabeth City, NC
Elizabeth City State University Elizabeth City, NC Curriculum Guide for Bachelor of Science in Education Degree: Middle Grades Education (Science) ASSOCIATE OF ARTS DEGREE: Universal General Education
Electrical and Computer Engineering
Electrical and Computer Engineering Roobik Gharabagi, Ph.D., Chair ([email protected]) Faculty: Will Ebel, Ph.D. ([email protected]) Armineh Khalili, M.S.E.E. ([email protected]) Huliyar S. Mallikarjuna, Ph.D.
University of Toledo Catalog 2013 2014 COLLEGE OF ADULT AND LIFELONG LEARNING Rocket Hall 1300/Dean s Office Rocket Hall 1060, Main Campus
COLLEGE OF ADULT AND LIFELONG LEARNING Rocket Hall 1300/Dean s Office Rocket Hall 1060, Main Campus Administration Dennis Lettman, Dean 419.530.3072 [email protected] Beth Gerasimiak, Senior Director
INTERNAL REGULATIONS FOR THE BACHELOR OF SCIENCE DEGREE IN MECHATRONICS AND ROBOTICS ENGINEERING
Czech Technical University in Prague Faculty of Engineering Assiut University INTERNAL REGULATIONS FOR THE BACHELOR OF SCIENCE DEGREE IN MECHATRONICS AND ROBOTICS ENGINEERING Assiut University awards at
How To Teach Engineering Science And Mechanics
Int. J. Engng Ed. Vol. 16, No. 5, pp. 436±440, 2000 0949-149X/91 $3.00+0.00 Printed in Great Britain. # 2000 TEMPUS Publications. Recent Curriculum Changes in Engineering Science and Mechanics at Virginia
Mechanical Engineering Technology 2011-12 Assessment Report
Mechanical Engineering Technology 2011-12 Assessment Report I. Introduction The Bachelor of Science program in Mechanical Engineering Technology is offered in three locations Klamath Falls, Portland Metro
Mechanical and Aeronautical Engineering. Hand Book 2006-2007
Mechanical and Aeronautical Engineering Hand Book 2006-2007 Contents 1.0 Introduction...1 2.0 Being a Student...1 2.1 Introduction...1 2.2 Self-reliance...1 2.3 Professionalism...1 3.0 Advisors...2 3.1
COLLEGE OF BUSINESS AND ECONOMICS
COLLEGE OF BUSINESS AND ECONOMICS DEAN OF THE COLLEGE OF BUSINESS AND ECONOMICS OFFICE OF THE DEAN MISSION VALUES PROGRAMMATIC ACCREDITATION MAJOR DEGREE PROGRAMS MINORS DISCIPLINES (FIELDS OF STUDY) ACADEMIC
ACCOUNTING AND FINANCE DOUBLE MAJOR
ACCOUNTING AND FINANCE DOUBLE MAJOR CURRICULUM Suggested sequence for students admitted as of Fall 2014 - Present First Semester Credits Second Semester Credits FRESHMAN YEAR Microeconomics, ECON 101*
General Education Guidelines for Normandale Community College Students Transferring to the University of St. Thomas
General Education Guidelines for Normandale Community College Students Transferring to the University of St. Thomas UST General Education Requirements Normandale Community College Courses Which Fulfill
Master of Science in Engineering - Electrical Engineering Option (MSE-EE) Student Outcomes Assessment Plan (SOAP)
Master of Science in Engineering - Electrical Engineering Option (MSE-EE) Student Outcomes Assessment Plan (SOAP) Updated August 4, 2010 Mission Statement The objective of MSE-EE Program is to provide
BSEE-EE Electrical Engineering Assessment Plan 2013-2017
BSEE-EE Electrical Engineering Assessment Plan 2013-2017 Program Overview Missions and Outcomes Three mission statements are provided below for the University of Cincinnati, the College of Engineering
Southern University College of Engineering Electronics Engineering Technology Department COURSE PRE-REQUISITES Course ID Course Title
Southern University College of Engineering Electronics Engineering Technology Department COURSE PRE-REQUISITES Course ID Course Title Pre-Requisite(s) ENGR 120 Freshman Engineering I High School Trigonometry
